®
®
The goal was quite simple: design an all-inclusive product that offers a complete integration of all of the elements required to achieve state-of-the-art loudspeaker management. This design goal was reached and exceeded with introduction of the DriveRack®
series. The 482 includes all of the functionality and features of the 480. Unlike the 481,
the 482 incorporates 4 inputs and 8 outputs on XLR connectors. The 482 also has the
use of a streamlined, tamper-resistant front panel. With this design feature in place, all
programming functions of the 482 can be performed through a 480 master, the 480R,
or via the Windows GUI. Up to 99 DriveRack® units can be chained together when
using the exclusive DriveRack® network protocol.
The 482 DriveRack® continues the legacy DriveRack® series, which has been created
by the company that has been redefining the standard of signal processing for more
than 30 years. dbx Professional Products has created a product that caters to
numerous applications in tour sound and sound contractor requirements.
The 482 DriveRack® was designed with the purpose and vision of providing four
independent input and eight output channels of processing power that include 31Band Graphic equalizers, as well as dbx’s own industry standard dynamics processing. All aspects of the aforementioned features can be controlled by the included
dbx Professional Products Interactive DriveWare™ software. Software updates can
also be downloaded instantly from www.dbxpro.com through the RS 232 port.
®
• 4 Input and 8 Outputs with routing
• 31 band graphic or 9 band parametric equalizer on every input (precrossover)
• Dual Real Time Audio Analyzers
• Butterworth, Bessel or Linkwitz-Riley
crossover filters
• 27 Different Crossover
Configurations
• Time Alignment and Transducer
Alignment Delays
• Compressor/Limiter on every output
• Speaker Compensation EQ (post
crossover)
• Multi-level Security System
• Separate House and Show EQ with
individual lockouts
• Triple redundant back up of all parameters when running network, 480R
and GUI
• TYPE IV™ Conversion System
• Electronically balanced/RF filtered
XLR Inputs and Outputs
• Proprietary RS-485 Control Network
• RS-232 PC Interface for computer display and configuration
8760 S. Sandy Pkwy.
Sandy, Utah 84070
Phone (801) 568-7660
Fax (801) 568-7662
Int’l Fax (801) 568-7583
[email protected]
http://www.dbxpro.com
A Harman International Company
18-0073-A 3/2
Inputs
Number of Inputs:
Connectors:
Type:
Impedance:
Maximum Input Level:
Max input RTA Level:
CMRR:
Input Gain Range RTA:
Outputs
Number of Outputs:
Connectors:
Type:
Impedance:
Output Transformers:
Max Output Level:
A/D Performance
Type:
Dynamic Range line:
Type IV™ dynamic range:
Sample Rate:
A/D Wordlength:
D/A Performance
Dynamic Range:
Sample Rate:
D/A Wordlength:
System Performance
Internal Wordlength:
THD + Noise:
Frequency Response:
Interchannel Crosstalk:
Pre EQ
Type:
4 (Inputs 3 or 4 can be selected as an RTA mic input)
Female XLR
Electronically balanced/RF filtered
>40kΩ
Hardware selectable for +30, +22, +14, dBu
-10 dBu
>40 dB typical, >55 dB at 1kHz
10 dB to 70 dB w/60 dB typical
8
Male XLR
Electronically balanced, RF filtered
120Ω
Optional
+25.5 dBu into 1kΩ
+22dBu into 600Ω
dbx Type IV™ Conversion System
>112 dB unweighted, 115 dB A-weighted
127 dB with transient material,
A-weighted, 22kHz BW
125 dB with transient material,
unweighted, 22kHz BW
119 dB typical with program material,
A-weighted, 22kHz BW
48kHz
24 bits
112 dB unweighted, 115 dB A-weighted
48kHz
24 bits
48 bits
0.003% typical at +4dBu, 1kHz, 9dB input gain
20Hz- 20kHz, +/-0.5dB
<-85dB at 1kHz, 0dB input gain
Pre Delay
Length:
Crossover
Type:
Filter Type:
Slope:
Range:
Notch Filters
Number:
1-5 per input channel not to exceed 10 for all input channels
1x2, 1x3, 1x4, 1x5, 1x6
2x3, 2x4, 2x5, 2x6, 2x7, 2x8, 3x4, 3x5, 3x6, 3x7, 3x8, 4x6, 4x8
Butterworth, Bessel, or Linkwitz-Riley
6, 12, 18 or 24 dB/octave for Butterworth or Bessel filters
12, 24, 36 or 48 dB/octave for Linkwitz-Riley filters
Post EQ
Type:
Number:
Range:
Dynamics
Type:
Attack/Release:
Linking:
Compressor/Limiter with PeakStopPlus™
Program Dependent
All 8 bands are linkable
Post Delay (Driver Alignment)
Length:
170 ms per output channel
Pink Noise Generator
Position:
Pink noise inserted on selected input(s)
Phase Compensation
Number:
Amount:
Output Polarity:
One per output channel
0-180 degrees phase shift
Reversible
Miscellaneous
Output Transformers:
Network:
GUI:
RTA Microphone:
ROM Upgrade:
Power Requirements
Watts:
One 31-band Graphic EQ per input channel, or 9 band
Parametric EQ per input channelRTA can be substituted for
EQ in channels 3 and 4
+/-12 dB range
680ms/channel
Dimensions
Dimensions:
Weight:
Shipping Weight:
Parametric
4 EQ bands per output channel
+/-15 dB range
Optional
Proprietary RS-485 Backbone
RS-232 interface for computer display and
configuration
Optional
Flash upgradeable through RS-232
100-240V - 50/60 Hz
35 Watts
Height- 3.5” X Width- 19” X Depth 12.15”
10 lbs.
11.5 lbs.
dbx engineers are constantly working to improve the quality of our products. Specifications are, therefore subject to change without notice.
FOR MORE INFORMATION CONTACT:
dbx Professional Products
8760 S. Sandy Pkwy.
Sandy, Utah 84070
Phone (801) 568-7660
Fax (801) 568-7662
[email protected]
http://www.dbxpro.com
The Professional’s Choice In Signal Processing