TECHNICAL DATA SHEET
MicroOne Pocket mop (40 cm)
1.
INTERNATIONAL ARTICLE NUMBER:
150370 blue, 150371 red, 150372 yellow, 150373 green
2.
PRODUCT CLASSIFICATION:
Single use microfibre mop
3.
COMPOSITION:
Surface layer:
4.
70 % Viscose
30 % Polyester
Microfiber strip:
70 % Polyamide
30 % Polyester
Inner layer:
100 % Polyester
Back layer:
100 % Polypropylene
Binding band:
100 % Polypropylene
TECHNICAL DATA:
Typical Value
Unit
42 x 12
cm
Weight per 40 cm mops
23
G
Max. water absorption 40 cm mops
150
mL
Size
5.
PRODUCT PROPERTIES & PRODUCT USAGE
 MicroOne is a single use microfiber mop with raised pockets
 Fits on 40cm Vileda CombiSpeed Pro and all competitor 40cm pocket frames
 100% microfiber leading edge for superior cleaning performance and bacteria removal
 Non-woven structured surface removes loose dirt and hair particles
 Suitable for hygiene sensitive areas, removes 99.9% of bacteria from surface
 Ideal for bucket and press, pre-prepared and spray methods
 Durable enough to last multiple wringing processes
 Can be disposed at the end of each shift or day, avoids bacteria growth on unwashed mops overnight
 Available in 4 colours for positioning in different application areas
Application:
 For dry, wet and damp cleaning of hard surfaces.
6.
STORAGE, TRANSPORTATION & DISPOSAL
Keep palletized products in a cold and dry place. Avoid exposure to direct sunlight. Product is not subject
to transportation regulations for hazardous substances or chemicals. Disposal via landfill or incineration
possible. Please respect local regulations.
7.
QUALITY APPROVALS / COMPLIANCE WITH INTERNATIONAL STANDARDS
This product is manufactured conforming to appropriate standards within FHCS Quality System.
Date: 2015/07/21
FREUDENBERG HOME AND CLEANING SOLUTIONS GMBH
Regional Technical Centre Europe
Höhnerweg 2 -4, Bau 149
69469 Weinheim, Germany
E-Mail: [email protected]
www.vileda-professional.com
Telefon: +49 (0) 6201 80 - 4336
Fax: +49 (0) 601 88 - 4339
All information contained herein is given according to our specifications and best knowledge without any warranty or guarantee and can be changed without further notice.
The suitability of our products to our customers specific applications and conditions of use has to be determined by our customers. In particular, product users shall not be
released from their duty to check all health, safety and environment relevant properties of the delivered goods under their specific conditions of use.