To turn on press the fire button 5 times. Functions: Press 3 times to Lock Press 3 times to Unlock Press 5 times to enter menu Once in the menu it will come up in your power settings as a preset. There are 5 presets M1 through M5, the purpose of those is to assist in jumping through 5W-60W faster than in 0.1W increments. To set enter the menu and lean the unit left....this will jump from preset to preset. Select the preset you want to adjust. Now lean the unit to the right and it goes into adjust mode. Let the unit adjust to the level you desire for that preset and once there click the fire button to the next menu Exit and lean the unit and you are out of the program. That preset is now set. Repeat above steps for each preset. 60 Watt SX350 chip Regulates down BELOW battery voltage.. down to 1.5V!!! handles 0.2 ohm - 3.0 ohm Atomizers Handcrafted Gravity Sensor Only one button! Screw-less Magnetic Battery lid Spring Loaded 510 connection 1x18650 battery Dimensions: 97x36x47mm Materials: Mahogany + choice of Brass or SS All functions in the menu: Power Setting - Set Power level (described above) Exit - Exit the menu Bypass - Turn on for use as a mechanical mod System - Turn the system off Link - Allows upgrades without removing the battery. Phone: +30 210 2400670 E-mail: [email protected] www.mmvapors.com MMVapors M. Alexandrou 145 & Polydefkous 2 13341 Ano Liosia Greece 5W - 60W Variable Wattage 1.5V - 9.5V Variable Voltage By-pass (direct connection) mode 0.66” OLED Screen Easy screw-less battery compartment access! Just press at the bottom
© Copyright 2025 Paperzz