Customer machines
mounting pattern as
needed in plate.
Remove plate
prior to machining.
Mounting Adapter
Plate
33.3
Rev.
Description
Initiator
Date
04
ECO 12940; Added 6mm to " Slip Fit
5.6 Customer
Interface (See Note 3)" callout; Added diameter symbol to
92 dimension; Removed 1.0 x 45 from 16 H7
3.6.
TBC
6/1/2015
Sensing Reference
Frame Origin
28.6
Sensing Reference
Frame Origin
28
+X
6 Slip Fit 5.6
Customer Interface
(See Note 3)
+X
B.C.
30°
-Y
25±0.025
-Z
+Y
+Z
94.5
63.5
DAQ System
-X
66.9
Net System
50
73
+Y
92
-Y
-X
25.4
DAQ System
32.8
Net System
1.2
19.1
Tool Adapter
Plate
4X Tap M6X1.0
5.6
Equally Spaced
Customer Interface
(See Note 3)
16 H7 3.6
Customer Interface
SIDE VIEW
TOOL SIDE
Connector for Cable
Varies Depending on
Sensor Selected
MOUNTING SIDE
ISOMETRIC VIEW
Notes:
1. Material: Hardened Stainless Steel and Aluminum.
2. Do not touch internal electronics or instrumentation.
This could damage the transducer and will void the warranty.
3. DO NOT EXCEED INTERFACE DEPTH, MAY CAUSE DAMAGE.
4. For best accuracy, transducer must be mounted to a surface rigid
enough to support loads without deflection.
1031 Goodworth Drive, Apex, NC 27539, USA
Tel: +1.919.772.0115 Email: [email protected]
Fax: +1.919.772.8259 www.ati-ia.com
ISO 9001 Registered Company
NOTES: UNLESS OTHERWISE
SPECIFIED.
DO NOT SCALE DRAWING.
ALL DIMENSIONS ARE IN
MILLIMETERS.
PROPERTY OF ATI INDUSTRIAL AUTOMATION, INC. NOT TO BE REPRODUCED IN ANY
MANNER EXCEPT ON ORDER OR WITH PRIOR WRITTEN AUTHORIZATION OF ATI.
DRAWN BY:
CHECKED BY:
3rd ANGLE PROJECTION
PROJECT #
R. Chambers 11/6/08
P. Fusco 12/5/08
SHEET 1 OF 1
TITLE
Delta Transducer
SCALE
SIZE
DRAWING NUMBER
1:1
B
9230-05-1330
REVISION
04