Integra
™
Sundt™ Carotid Endarterectomy Shunts
The Integra™ Sundt Carotid Endarterectomy Shunt
limits uncertainty by providing temporary carotid
bypass for cerebral circulation during carotid
endarterectomy procedures.
Product Benefits
• Silicone elastomer with stainless steel spring reinforcement to minimize kinking and occlusion
of the cannula lumen.
• Aids in the ease of insertion of the proximal
and distal ends.
• Cone-shaped bulbs facilitate fixation of the shunt
to the vessel. • For internal shunts, a distal tourniquet is often not required if the proper shunt size is selected.
• Internal and external shunts are also available
with a 1cm non-reinforced segment near the midway point of the shunt to allow the surgeon to selectively occlude blood flow through the shunt with an
appropriate clamping device and to facilitate simple shunt removal.
Integra™
Sundt™ Carotid Endarterectomy Shunts
Sundt Internal (Straight)
Original design (fully spring reinforced). Total length 10cm.
Catalog Number
Nominal Size (Shunt OD)
Bulb OD / A (Distal)
Bulb OD / B (Proximal)
NL850-5065
NL850-5066
NL850-5067
3.0mm x 4.0mm
3.5mm x 5.0mm
4.0mm x 5.0mm
3.8mm
4.6mm
5.5mm
5.5mm
6.3mm
6.3mm
B
D (Distal) x F (Proximal)
F
D
A
Inlet ID / C (Distal)
1.3 mm
1.6 mm
2.2 mm
Inlet ID / E (Proximal)
2.1 mm
3.1 mm
3.1 mm
C (ID)
E
10 cm total length
Sundt Internal (Straight)
With 1cm non-reinforced center segment. Total length 10cm.
Catalog Number
Nominal Size (Shunt OD)
Bulb OD / A (Distal)
Bulb OD / B (Proximal)
Inlet ID / C (Distal)
Inlet ID / E (Proximal)
NL850-5060
NL850-5061
NL850-5062
NL850-5063
3.0mm x 4.0mm
3.5mm x 5.0mm
4.0mm x 5.0mm
3.5mm x 4.5mm
3.8mm
4.6mm
5.5mm
4.6mm
5.5mm
6.3mm
6.3mm
5.9mm
1.3 mm
1.6 mm
2.2 mm
1.6 mm
2.1 mm
3.1 mm
3.1 mm
2.6 mm
B
D (Distal) x F (Proximal)
F
D
A
C (ID)
1 cm
E
10 cm total length
Sundt External (Loop)
Original design (fully spring reinforced). Total length 30cm.
Catalog Number
Nominal Size (Shunt OD)
Bulb OD / A (Distal)
Bulb OD / B (Proximal)
Inlet ID / C (Distal)
Inlet ID / E (Proximal)
NL850-5070
NL850-5071
NL850-5072
3.0mm x 4.0mm
3.5mm x 5.0mm
4.0mm x 5.0mm
3.8mm
4.6mm
5.5mm
5.5mm
6.3mm
6.3mm
1.3 mm
1.6 mm
2.2 mm
2.1 mm
3.1 mm
3.1 mm
Inlet ID / C (Distal)
B
D (Distal) x F (Proximal)
F
DA
C (ID)
E
30 cm total length
Sundt External (Loop)
With 1cm non-reinforced center segment. Total length 30cm.
Catalog Number
Nominal Size (Shunt OD)
Bulb OD / A (Distal)
Bulb OD / B (Proximal)
NL850-5076
NL850-5077
NL850-5078
NL850-5079
3.0mm x 4.0mm
3.5mm x 5.0mm
4.0mm x 5.0mm
3.5mm x 4.5mm
3.8mm
4.6mm
5.5mm
4.6mm
5.5mm
6.3mm
6.3mm
5.9mm
B
D (Distal) x F (Proximal)
1 cm segment
F
DA
1.3 mm
1.6 mm
2.2 mm
1.6 mm
Inlet ID / E (Proximal)
2.1 mm
3.1 mm
3.1 mm
2.6 mm
C (ID)
E
30 cm total length
See package insert for full prescribing information.
For more information please contact:
Integra 311 Enterprise Drive, Plainsboro, NJ 08536
877-444-1122 USA 609-936-5400 outside USA 866-800-7742 fax
integralife.com
n
n
n
Integra and the Integra logo are trademarks of Integra LifeSciences Corporation. ©2011 Integra LifeSciences Corporation. All rights reserved. Printed in USA 0K NS5051-10 /11