Anemo4403 v2 Wind speed sensor INTRODUCTION Robust and high durability under extreme conditions. Pulse output. From 2 to 200km/h wind speed. Easy to connect. 20 meters cable is included. High quality stainless steel bearings. Maintenance free. FEATURES Robust wind speed sensor, extremely resistant and flexible, probably one of the best wind sensors in the market. Suitable for many different applications. Supplied pre-wired with 20 meter cable to facilitate the connexion. Stainless steel bearings and high quality technical plastic body and cups. APPLICATIONS Anemo4403 has been designed for home and industrial applications: cranes, buildings, PV panels, wind turbines, weather stations, green houses... Anemo4403 is usually connected to devices such as tachometers (see our ref. WM44-P, WM44-DRM, TCA-200R/TCA-201R, BS100/X), PLCs, dataloggers , or to in order to visualize the wind speed and/or to programme alarm thresholds at desired values or wind speed data acquisition. OPERATION Input / Output Wind Speed - Output Relation 1Kohm REED 100nF RED YELLOW BLACK Output frequency is proportional to wind speed. Wind speed = 0Km/h Output Anemo4403 = 0 Hz. Wind speed = 100Km/h Output Anemo4403 = 105 Hz (pulses per second). frequency contact [Hz] Up to 200km/h wind speed. Output: Internal dry contact with a serial resistor that commutes to a proportional frequency to the wind speed (see graphic). Included an internal capacitor to optionally connexions for filtering signal. It incorporates a capacitor that can connect optionally for signal filtering. 200 150 y = 1,05x 100 50 0 0 20 40 60 80 100 120 140 160 180 200 wind speed [km/h Anemo4403 v2 Anemo4403 v2 Wind speed sensor TECHNICAL SPECIFICATIONS Power supply Max. Input Measuring Range Starting speed Precisión IP rating 5... 24Vdc 15mA 2-200 km/h 8 km/h +- 2% IP65 Storage temp. Operating temp (free ice) Weight (without cable) -35ºC +85ºC -20ºC +80ºC 150 g approx. Weight (cable= 20meters) 1260 g approx. CONNECTING EXAMPLES Connection option 2 wires. WM44-P and TCA200/R DISPLAY 1Kohm REED 100nF RED +24Vdc YELLOW INPUT BLACK NC ANEMO4403 v2 Connection option 3 wires 1Kohm REED 100nF ANEMO4403 v2 RED +24Vdc YELLOW INPUT 1K to 4K7 BLACK COMMON Anemo4403 v2 INTERNAL CIRCUIT PLC
© Copyright 2024 Paperzz