SS-4
Segment Name: COMPOSITE 24X24 MOP
SINK
Segment Code: SS-4
SS-4
FLORESTONE
MODELS MSR-2424 / MSR-3624
02'(/6065065
MOLDED MOP RECEPTORS
Architect’s Specifications
Furnish and install molded Mop Receptor Model
MSR-2424 / MSR-3624 (specify) as manufactured by
Florestone Products Co. Molding will be done under
heat and pressure using matched metal dies. The unit
will be one piece with no seams. Shoulders will be no
Molded one-piece construction for light weight
TM
and easy handling. Supplied with Wedge-Lok
less than 1" wide and 9½" inside. Receptor will have
seal, integral drain and chrome strainer.
ribbed underbody and integral drain providing for a
no-caulked connection to a 2" or 3" ABS pipe
A
C
(specify drain size). Drain grid will be 18-gauge stain-
D
02'(/6065065
less steel, flat type, #430.
E
B
Molded mop sinks are supplied with Wedge-Lok
®
seal for use on ABS pipe only.
10"
5j"
1j"
1k"
6"
Model
A
B
C
D
E
WT.
MSR-2424
24"
24"
12"
12"
12"
50
MSR-3624
36"
24"
18"
18"
12"
72
Standards:
UP
I.A.P.M.O. International Association of Plumbing and Mechanical Officials
C
File No. 2646.
®
ANSI American National Standards Institute – Specifications Z-124.6.
HUD/FHA National Specifications UM-73.
ASTM American Society of Testing and Material — E-162-75, E-84, D-635
CSA TEST Warnock Hersey Listed: CAN / CSA - B45.0 – CAN / CSA - B45.5
MANUAL FAUCETS
SS-4
897-RCF
Wall Mounted Service Sink Faucet with Atmospheric Vacuum Breaker Spout
PRODUCT TYPE
Wall mounted service sink faucet with atmospheric
vacuum breaker spout
Job Name ____________________________________________________
Item Number _________________________________________________
Section/Tag __________________________________________________
FEATURES & SPECIFICATIONS
• Rough chrome plated finish
• Solid brass body construction
• Adjustable 7 5/8" - 8 3/8" centers
• Atmospheric vacuum breaker spout with pail hook and
wall brace
• 3/4" Male garden hose thread outlet
• 2 3/8" Lever handles with secured color coded index
buttons, catalog #369
• Quaturn™ quarter-turn renewable compression
cartridge that closes with water pressure with tapered
square broach to facilitate handle removal, catalog
#1-100XT and #1-099XT
• 1⁄ 2" NPT female union nut supply inlets
• 5/16" Hex. integral supply stops
• Mounting hardware included
Model Specified ______________________________________________
Architect _____________________________________________________
Engineer _____________________________________________________
Contractor ___________________________________________________
❏ Submitted as Shown
❏ Submitted with Variations
Date _________________________________________________________
PERFORMANCE SPECIFICATION
• Rated Operating Pressure: 20-125 PSI
• Rated Operating Temperature: 40-140° F
WARRANTY
• Lifetime Limited Faucet Warranty
• 5-Year Limited Cartridge Warranty
• 1-Year Limited Finish Warranty
COMPLIANT TO
9/08
EN BU
I
CO
UNCIL
ING
M
RE
LD
U.S. G
• ASME A112.18.1
E M B E R
• CSA B125
• ADA
2100 South Clearwater Drive
Des Plaines, IL 60018
P: 847/803-5000
F: 847/803-5454
Technical: 800/TEC-TRUE
www.chicagofaucets.com
SS-4
897-RCF
Wall Mounted Service Sink Faucet with
Atmospheric Vacuum Breaker Spout
ARCHITECT/ENGINEER SPECIFICATION
Chicago Faucets No. 897-RCF, Rough chrome plated solid cast brass construction. Atmospheric vacuum breaker spout with
pail hook, wall brace and 3/4" male garden hose thread outlet. 2 3/8" metal lever handles with height point tapered broach and
secured color coded index buttons. Quaturn™ quarter-turn renewable compression cartridge designed to close with water
pressure with square tapered broach feature to help facilitate handle removal. Inlet supply arms with adjustable centers from
7 5/8" – 8 3/8". Integral supply stops in body for servicing cartridges. Mounting hardware included. This product meets ADA
requirements and is tested and certified to ASME A112.18.1 and CSA B125 industry standards.
10-7/8 "
276mm]
1-7/8 "
[48mm]
15/16 "
[24mm]
FINISHED
WALL
1-1/4" x 2-5/8"
[32mm x 67mm]
OVAL FLANGE
4"
mm]
#10 - 1-1/2" FLAT
HEAD WOODSCREW
2-1/8 "
[54mm]
10-7/8 "
276mm]
3/4" MALE GARDEN
HOSE THREAD
4"
[102mm]
2-1/2 "
[64mm]
1-1/8 "
[29mm]
2-3/4" [70mm]
DIA. FLANGE
7-5/8" - 8-3/8"
[194mm -213mm]
ADJUSTABLE SUPPLY ARMS
5/16 HEX SOCKET
INTEGRAL SUPPLY
STOPS
4"
[102mm]
1/2" NPT
FEMALE
THREAD INLET
7-7/8 "
[200mm]
OPERATION
AND MAINTENANCE
Installation should be in accordance with local plumbing codes. Flush all pipes thoroughly before installation. After installation, remove
spout outlet or flow control and flush faucet thoroughly to clear any debris. Care should be taken when cleaning this product. Do not
use abrasive cleaners, chemicals or solvents as they can result in surface damage. Use mild soap and warm water for cleaning and
protecting the life of Chicago Faucet products. For specific operation and maintenance refer to the installation instructions and repair
parts documents that are located at www.chicagofaucets.com.
Chicago Faucets, member of the Geberit Group, is the leading brand of commercial faucets and fittings in the United States, offering
a complete range of products for schools, laboratories, hospitals, office buildings, food service, airports and sport facilities.
Call 1.800.TECTRUE or 1.847.803.5000 Option 1 for installation or other technical assistance.
®
C
US
9/08 Product specifications subject to change without notice.
2100 South Clearwater Drive
Des Plaines, IL 60018
P: 847/803-5000
F: 847/803-5454
Technical: 800/TEC-TRUE
www.chicagofaucets.com
SS-4
FLORESTONE
MOLDED AND TERRAZZO
3
MOP RECEPTORS
2
(1) MR-370 e" Hose, 5' long with clamp.
1
(2) MR-371 Speakman® Faucet with vacuum
braker, double stops and bucket hook with brace.
U.S. made.
8
(3) MR-372 Mop hanger with 3 clamps.
4
5
Speakman® is a Registered Trademark of Speakman Co.
(4) MR-373 Stainless Steel rim guard, #304,
20 gauge, 24" or 36".
Specify length and one (1), two (2),
three (3) or four (4) each.
(available on Molded Mop Sinks only)
(5) MR-374 Wedge-Lok® Seal, specify 2" or 3".
(available on Molded Mop Sinks only)
(6) MR-375 Flat strainer, chrome.
(available on Molded Mop Sinks only)
(7) MR-376 Dome strainer, chrome.
(available on Molded Mop Sinks only)
(8) MR-377 Two (2) each 24" panels or
One (1) 24" panel and
one (1) 36" panel.
0235(&(3725$&&(6625,(6
ACCESSORIES
SS-4
FLORESTONE
MOLDED AND TERRAZZO
3
MOP RECEPTORS
2
(1) MR-370 e" Hose, 5' long with clamp.
1
(2) MR-371 Speakman® Faucet with vacuum
braker, double stops and bucket hook with brace.
U.S. made.
8
(3) MR-372 Mop hanger with 3 clamps.
4
5
Speakman® is a Registered Trademark of Speakman Co.
(4) MR-373 Stainless Steel rim guard, #304,
20 gauge, 24" or 36".
Specify length and one (1), two (2),
three (3) or four (4) each.
(available on Molded Mop Sinks only)
(5) MR-374 Wedge-Lok® Seal, specify 2" or 3".
(available on Molded Mop Sinks only)
(6) MR-375 Flat strainer, chrome.
(available on Molded Mop Sinks only)
(7) MR-376 Dome strainer, chrome.
(available on Molded Mop Sinks only)
(8) MR-377 Two (2) each 24" panels or
One (1) 24" panel and
one (1) 36" panel.
0235(&(3725$&&(6625,(6
ACCESSORIES