MT-2725-2008
Breathe easier
VENTILATION
ACCESSORIES FOR
ACUTE CARE MEDICINE
02 |
DRÄGER VENTILATION ACCESSORIES FOR ACUTE CARE MEDICINE
Air to breathe –
D-2840-2008
MT-2840-2008
for you and your patients
| 03
Whether on an intensive care unit, in the
operating room, or in the emergency department:
To treat critically ill patients as gently as possible
and to get them back on the road to recovery, you
need medical devices you can rely on to help you
perform your job safely and effectively. However:
A device is only as good as the accessories
needed to operate it.
SOMETHING YOU CAN COUNT ON:
ORIGINAL VENTILATION ACCESSORIES FROM DRÄGER
To ensure that our ventilation accessories provide optimal
support for the device, the therapy it provides and the caregiver,
we take just as much care during the specification and
development phase as well as in the manufacturing process
as we do with our medical technology devices.
MT-3648-2008
This means: Accessories not only fulfill all relevant official
quality standards. They also undergo strict testing to pass our
own Dräger quality standards, so that the Dräger devices in
your hospital can achieve the full performance they were
designed to provide. Every day, they help you protect and save
the lives of your patients.
| 04
The quality standards
for Dräger ventilation
accessories
A complete ventilation system –
tested and approved
The right product for every patient
räger offers you not only device-specific accessories, but
D
also ventilation consumables. Our accessory portfolio is
so comprehensive that we can offer a solution for almost
any application in connection with our medical devices:
From expiration valves to HME and catheter mounts, from
neonates to adults and for invasive and non-invasive therapy.
Less time, more safety
Thanks to their superior performance and ergonomics,
ventilation accessories from Dräger help you improve
workflow and patient care processes. That’s why our
disposable accessories come with the same reliability
as our reusable accessories.
MT-716-2001
In acute care medicine, you want to care for your patients,
not your equipment: All components of our ventilation
accessories have been carefully tested, certified and
approved for use with their corresponding devices and
connections.
THAT’S WHY DRÄGER ALSO
OFFERS DISPOSABLE VENTILATION
ACCESSORIES
You have options: In addition to our comprehensive
portfolio of reusable accessories, we also offer
a complete range of disposable products. We are
constantly expanding this selection to meet the needs
of our customers.
Our disposable products are designed to support your
process demands and hygiene guidelines. Choose for
yourself the best solution for your hospital’s individual
needs.
MT-2759-2008
Breathing circuits
D-19538-2009
NEONATAL CARE
e.g. Babylog® VN500
D-12369-2009
Expiration valves
MT-6073-2008
INTENSIVE CARE
e.g. Evita Infinity® V500
D-12219-2010
| 05
Breathing system filters and HME
MT-2858-2008
MT-1782-2008
e.g. Oxylog® 3000 plus
NIV and anesthesia masks
D-26365-2009
MT-2673-2008
Catheter mounts
MT-5836-2008
EMERGENCY DEPT.
CO2 cuvettes
D-18862-2010
OPERATING ROOM
e.g. Primus® IE
06 |
DEVICE RELATED ACCESSORIES FROM DRÄGER: EXPIRATION VALVES
These valves
D-19396-2009
D-12219-2010
let you catch
Savina disposable expiration valve
To ventilate patients for extended periods
of time, you need more than just a
dependable ventilator. You also need
an expiration valve that reliably controls
the respiratory phases and regulates
PEEP (Positive End-Expiratory Pressure).
Expiration valves
For the Dräger Evita Family
and the Dräger Savina
Dräger expiration valves were developed especially
for use with Dräger ventilators – and to fit into your
workflow. They let you precisely control inspiration
and expiration phases of your patient. At the same
time, they control the therapeutically relevant level
of PEEP. You can count on Dräger expiration valves
for your next patient as well: they can be quickly and
easily exchanged.
Antenna
relays the RFID signal to other components
(e.g. RFID-capable breathing hoses)
RFID Tag
stores product-specific data that can be
used by Infinity ID devices
Detachable water trap
protects the expiration valve from water
condensation
| 07
YOU CAN COUNT ON IT:
– simple and intuitive replacement
– easy assembly, connections
clearly assigned, simple handling
– Infinity ID expiration valve with
enhanced functions (in connection
with the Dräger Evita Infinity V500 only):
>compatibility control
>exchange monitoring
D-19383-2009
– pneumatically and electromagnetically
controlled valves available
(depending on the Dräger
ventilator used)
Evita Infinity® V500
disposable expiration valve
Expiration valves
your breath
08 |
NON DEDICATED ACCESSORIES FROM DRÄGER: BREATHING CIRCUITS
direct
D-24213-2009
D-14600-2009
The
to effective therapy
Dräger VentStar hose for the Oxylog 3000 plus
When expired air leads to
condensation in the breathing hose,
bacterial contamination or damage
to the hose can result and the hose
must be replaced.
Breathing circuits
Dräger VentStar® and Infinity® ID
Dräger offer you a complete portfolio of
breathing circuits in a range of designs for
all Dräger ventilators, therapeutic applications,
patient groups and care situations.
Inspiration circuit
Expiration circuit
| 09
YOU CAN COUNT ON IT:
– PVC-free
– latex-free
D-24205-2009
– the right system for every challenge:
>economical standard solutions
made from high-quality materials
>inspiratory or dual-heated
breathing system hoses
>individually extendable,
flexible hoses
>coaxial breathing system hoses
(hose in hose)
>water trap breathing hose systems
>Infinity ID breathing hose systems
>many hoses also available especially
for neonatal applications
Dräger VentStar Coax 180 coaxial breathing hose
Breathing circuits
route
10 |
NON DEDICATED ACCESSORIES FROM DRÄGER: BREATHING SYSTEM FILTERS AND HME
Filter out risk
MT-11165-2006
MT-2759-2008
from the very
Breathing system filter SafeStar 55
Ventilating patients for long periods of time
can be risky. Dry air can damage bronchial
self-cleansing mechanisms, and the danger
of infection increases.
Breathing system filters
and HME
Dräger HumidStar®, CareStar®,
SafeStar® and TwinStar®
Dräger offers you a range of breathing system filters
for different therapeutic applications and patient groups:
From the HME, which reliably holds in moisture and
warmth, to pure filtration systems, and on to combination
filter HME systems, which are suited for both tasks.
Standard connectors
for safe connections to all other components
(e.g. hoses or masks)
Transparent casing
for easy filter inspection
Clear labeling and color coding
to select the right filter quickly and easily
Luer-Lock connector
Sample port at a practical 45° angle:
for comfortable sampling as close to
the patient as possible
Sample port cap connector
prevents loose parts from falling into
the hose system
| 11
YOU CAN COUNT ON IT:
– PVC-free
– latex-free
– a solution for every patient group from infants to adults
–h
ighly flexible system configuration:
Available as straight or angled model
MT-11164-2006
–p
rotects the ventilator: CareStar
and SafeStar filter can also be
used on the ventilator (on both
inspiratory and expiratory
connections)
Filter/HME
Dräger TwinStar® 55
Breathing system filters and HME
beginning
12 |
DEVICE RELATED ACCESSORIES FROM DRÄGER: CO2 CUVETTES
A reliable sensor
D-7062-2009
MT-2858-2008
for your patients’
Dräger CO2 cuvette for adult applications, reusable
Is the tube placement correct? How effective
is CPR? To adjust ventilation settings optimally
for each patient, you have to react to changes
in breathing patterns and pulmonary perfusion.
CO2 cuvettes
For all Dräger ventilators
Transparent casing
capnogram easily visible
CO2 cuvettes from Dräger are designed and approved for
use Dräger ventilators. They not only work reliably with the
device, but also with you: helping you to provide quality care.
Distinct color coding
easier to select, no mix-ups (adult and
pediatric, disposable and reusable models)
| 13
YOU CAN COUNT ON IT:
– only one cuvette for all Dräger
ventilators: no need to exchange the
cuvette when a patient is transferred
from the emergency room
–p
ractical: after use, the cuvette is
disposed of together with the entire
breathing hose system
– the right CO2 cuvette for adult
and pediatric applications
– extremely robust
– weighs less than 7g:
almost no additional weight
on the tube
D-585-2009
– compatible with any other
Dräger sensor
Dräger Disposable CO2 cuvette
for pediatric applications
Dräger Disposable CO2 cuvette
for adult applications
CO2 cuvette
’ well-being
14 |
NON DEDICATED ACCESSORIES FROM DRÄGER: CATHETER MOUNTS
MT-1926-2008
D-12540-2009
Give them
Dräger Airway connector ErgoStar AC 95
Intubated patients are difficult to move,
and any manipulation can cause their
condition to deteriorate.
Catheter mounts
Dräger ErgoStar®
Tube extensions and airway connectors make it easier
for you to safely move adult and pediatric patients. They
are very easy to use and help keep your hands free for
your patients.
Device-sided 22F/15M connector
2-in-1 solution with less dead space
External spiral
prevents kinking and blockage, offers maximum
flexibility and is very lightweight
Luer-Lock connector
Sample port at a practical 45° angle: comfortable gas
sampling as close to the patient as possible
Dual-rotational connector
minimizes traction and torque on the tube
Dual cap design
enables suction and bronchoscopy without loss of PEEP
more room –
YOU CAN COUNT ON IT:
–P
VC- and latex-free
– s mooth surfaces for low gas flow
resistance
– s tandard connectors for secure
connections to other components
– improved workflow thanks to
single-use design
– a vailable in a range of lengths and with
very small dead space (16 ml) for
pediatric patients
– red
safety cap (on every product):
The system is totally closed and protected
until use directly on the patient
Dräger tube extension
ErgoStar® CM 45
Catheter mounts
to care
MT-1922-2008
m
| 15
16 |
NON DEDICATED ACCESSORIES FROM DRÄGER: NIV AND ANESTHESIA MASKS
Fit your
MT-4197-2008
MT-2673-2008
and your busy schedule
Dräger ComfortStar®
For NIV and anesthesia masks to function
properly, they have to fit the patient’s face
perfectly.
NIV masks
Dräger NovaStar® TS, ClassicStar®
Bendable forehead cushion with silicone gel pad
to stabilize the mask and distribute the pressure
from the nasal bridge to the forehead
Comfortable and easy to use: Dräger face masks were
specially developed for gentle non-invasive ventilation.
They cover nose and mouth completely and support
effective non-invasive therapy.
Bendable ring
the mask can be molded to fit the facial contours
of the patient for a better, more comfortable seal
Anesthesia masks
Magnetic clasps
simple and comfortable NIV mask application
thanks to auto-adjusting magnetic clasps that
can be quickly opened in an emergency
ComfortStar® and LiteStar®
Patient comfort is also a top priority for our anesthesia
face masks. The drop- and round-shaped designs fit
any anatomy and ensure an optimal seal.
Adjustment wheel
stepwise adjustment of the forehead brace
for a comfortable position
Flexible elbow connector
rotates full 360°
| 17
YOU CAN COUNT ON IT:
– facial and nasal masks
(available in ventilated and
non-ventilated versions)
–w
ide range of sizes for different
facial contours
MT-6197-2006
D-16666-2009
– a vailable together with the mask and
separately: the Dräger facial template
Nasal CPAP
Dräger BabyFlow®
Patient comfort, efficiency and costeffectiveness: The Dräger BabyFlow
nCPAP interface represents the
cutting edge of medical technology.
It not only provides effective therapy,
but also protects them from the
potential complications of intubation.
NovaStar® TS SE
NIV and anesthesia masks
D-2303-2011
patients,
18 |
PACK2GO
Everything you need
at your fingertips – to make your job
PORTFOLIO
Dräger Pack2Go® for the
intensive care unit and anesthesia
Pack2Go for non-invasive ventilation
– Pack2Go Evita Non-invasive Ventilation Pack
– Pack2Go Carina Non-invasive Ventilation Pack
– Pack2Go Oxylog 3000 plus NIV Pack
MT-4757-2008
– Pack2Go Oxylog 3000/3000 plus NIV Pack
Pack2Go for invasive ventilation
– Pack2Go Evita Invasive Ventilation Pack
– Pack2Go Savina Invasive Ventilation Pack
Preparing a ventilator for the next patient is a time-consuming
task: Choosing the right size mask, gathering separate
components from different manufacturers from the various
shelves of perhaps several storage rooms – and then making
sure that everything fits and works.
Packaged accessories
Dräger Pack2Go®
With Pack2Go, we have put together complete accessory
packages for a number of Dräger devices (Evita family,
Savina, Carina, Oxylog 3000/300plus as well as for the
anesthesia platforms Fabius and Primus). In just a few
minutes, you have everything up and running – with highquality accessories that have been tested for use with
Dräger devices.
– Pack2Go Invasive Ventilation Mini Pack
Pack2Go for anesthesia
– Pack2Go Anesthesia Flex Pack, Adult
– Pack2Go Anesthesia Water trap Pack, Adult
– Pack2Go Anesthesia Basic Pack, Pediatric
| 19
much easier
YOU CAN COUNT ON IT:
–e
verything from a single source:
The right ventilation accessories
for your Dräger ventilator
– s aves time and effort: all components
available for use in a single step
–h
ygienic: clinically clean disposable
accessories can help reduce the
possibility of cross-contamination
(i.e.VAP)
D-10333-2011
– large selection: the right package
solution(s) for every Dräger ventilator
Dräger Pack2Go®
Pack2Go
that
20 |
SUMMARY TABLE
ventilation
an overview
MT-11164-2006
D-24205-2009
D-19383-2009
Our disposable
DRÄGER EXPIRATION VALVES
DRÄGER BREATHING CIRCUITS
DRÄGER BREATHING SYSTEM FILTERS
AND HME
For the Dräger Evita family
Standard breathing hose systems
Heat and moisture exchangers (HME)
Expiration valve
VentStar® Basic
protects from the drying –
Infinity® ID-expiration valve
VentStar® Basic (P)
without bacterial or viral protection:
(V500 only)
VentStar® Basic (N)
HumidStar®
For the Dräger Savina
expiration valve
Heated breathing hose systems
VentStar® heated
VentStar® heated (N)
Dual-heated breathing hose systems
Breathing system filters with bacterial and
viral protection without moisturizer:
CareStar®, electrostatic filter
SafeStar®, mechanical filter
VentStar® dual-heated
Flexible breathing hose systems
VentStar® Flex
Coaxial breathing hose systems
VentStar® Coax
Water trap breathing hose systems
VentStar® Water trap
Infinity® ID-Breathing hose systems
Breathing hose system smooth inside
Breathing hose system Basic
Breathing hose system heated
Breathing hose system dual-heated
Breathing hose system Flex
Breathing hose system Coaxial
Breathing hose system Water trap
Oxylog breathing hose system
Many disposable ventilation accessories
are available in reusable form.
VentStar® Oxylog 1000
VentStar® Oxylog 2000
VentStar® Oxylog 3000
Breathing system filter with bacterial and
viral protection and moisturizer:
TwinStar®, electrostatic filter with HME
TwinStar® Hepa,
mechanical filter with HME
| 21
DRÄGER CO 2-CUVETTES
D-2303-2011
D-585-2009
D-10057-2011
accessories –
CATHETER MOUNTS
DRÄGER NIV AND
AND AIRWAY CONNECTORS
ANESTHESIA MASKS
For adults
Smooth-wall tube extensions
NIV facemasks with silicone cushion
ErgoStar® CM 40
NovaStar® SE (reusable)
Standardized for all applications
NovaStar® AAV (reusable)
For children
Variable tube extensions
Breathing resistance:
ErgoStar® CM 50
2,4 mbar, dead space volume: < 4,5 ml
NIV facemasks with air cushion
ClassicStar® SE (disposable)
Airway connectors
ClassicStar® AAV (disposable)
ErgoStar® AC 90
NIV nasal masks with air cushion
ClassicStar®,
non-ventilated (disposable)
ClassicStar®, ventilated (disposable)
Anesthesia masks
ComfortStar®
LiteStar®
Silicone masks
Nasal CPAP
BabyFlow®
Drägerwerk AG & Co. KGaA
Moislinger Allee 53–55
23558 Lübeck, Germany
www.draeger.com
Manufacturer:
Dräger Medical GmbH
Moislinger Allee 53–55
23558 Lübeck, Germany
As of August 2015:
Dräger Medical GmbH changes
to Drägerwerk AG & Co. KGaA.
REGION EUROPE CENTRAL
AND EUROPE NORTH
REGION MIDDLE EAST, AFRICA
Dräger Medical GmbH
Moislinger Allee 53–55
23558 Lübeck, Germany
Tel +49 451 882 0
Fax+49 451 882 2080
[email protected]
Dräger Medical GmbH
Branch Office
P.O. Box 505108
Dubai, United Arab Emirates
Tel +971 4 4294 600
Fax+971 4 4294 699
[email protected]
REGION EUROPE SOUTH
REGION ASIA / PACIFIC
Dräger Médical S.A.S.
Parc de Haute Technologie d’Antony 2
25, rue Georges Besse
92182 Antony Cedex, France
Tel +33 1 46 11 56 00
Fax +33 1 40 96 97 20
[email protected]
Draeger Medical
South East Asia Pte Ltd.
25 International Business Park
#04-27/29 German Centre
Singapore 609916, Singapore
Tel +65 6572 4388
Fax+65 6572 4399
[email protected]
REGION CENTRAL
AND SOUTH AMERICA
Dräger Panama Comercial S. de R.L.
Complejo Business Park,
V tower, 10th floor
Panama City
Tel +507 377 9100
Fax+507 377 9130
[email protected]
90 67 236 | 15.06-2 | Communications & Sales Marketing | PP | LE | Printed in Germany | Chlorine-free – environmentally compatible | Subject to modifications | © 2015 Drägerwerk AG & Co. KGaA
CORPORATE HEADQUARTERS