Extended Range IR Illuminator
Operator Manual
NIGHT OPTICS USA, INC | www.nightoptics.com
TABLE OF CONTENTS
Product Description
1
Technical Specifications
1
Product Overview
2
Package Contents
2
Device Operation
3-4
- Battery Installation
3
- Variable Power Switch
3
- Mount, Windage & Elevation
3
- Focusable Beam Adjustment
4
Maintenance
5
Warranty
6
PRODUCT DESCRIPTION
The Night Optics USA, Inc. 805nM IR-K2 Pro IR Illuminator is our best selling
and all-around best performing IR Illuminator. With simple controls and
versatile mounting capabilities, the K2 Pro is an excellent companion to any
night vision device.
The IR K2 Pro features a focusable beam, variable power switch and
windage / elevation adjustment which allows you to Zero the device.
TECHNICAL SPECIFICATIONS
Type
Eye Safe Diode
Class
IIIB
Power
350 mW (variable)
Peak Wavelength
805 nm
Beam Angle
6°
Batter Type/Life
3v CR123 / 50 Hours
Mount
1/4" - 20 screw
Temperature Range
4°F - 113°F
Dimensions
1.5" x 6.4"
Weight
12.8 oz
Warranty
1 Year
1
OVERVIEW
6
2
1
5
4
3
Figure 1
PRODUCT BREAK-DOWN
[1] Body/Battery Housing
[4] Windage/Elevation Adjustment
[2] Adjustable front Objective
[5] Battery Compartment Access
[3] Mount
[6] Variable Power Switch
PACKAGE CONTENTS
[1] IR-K2 Pro IR Illuminator
[4] 1 Year Limited Warranty
[2] 1 3v CR123 Battery
[3] Operator Manual
2
OPERATION
Battery Installation
• Remove battery cap/power switch - Insert [1] 3v CR123 (negative first).
• Replace battery cap/power switch securely.
Using the Variable Power Switch
• Turn the variable power switch (fig. 1.6) to the desired
output level. (example below)
Power Output/Controls
100% | Off% | 50%
Figure 2
Variable Power Switch
Battery Cap
Mount/Windage & Elevation
• To mount the IR-K2 Pro, align the mount point to device or rail adaptor
and use the mount screw (Fig. 3.1) to tighten.
• The IR-K2 Pro can be Zeroed to the night vision/weapon by adjusting the
Windage and Elevation (Fig. *3.2 & 3.3) knobs.
3
1
2
Figure 3
MOUNT BREAK-DOWN
[3] *Windage/Elevation Adjust.
[1] Mount Point/Screw
[2] *Windage/Elevation Adjust.
*Adjustment dependant on mounting orientation
3
OPERATION
Continued...
Focusable Beam Adjustment
The IR-K2 Pro features a focusable IR beam adjustment built into the body of
the device. To adjust the beam on this device:
• Twist the front objective of the device to extend the lens and focus the
beam. Reverse this step to widen the IR beam.
Note: Fully closed the IR device will provide a wide field of
illumination. Fully extended the IR device will provide a
narrow field of illumination.
Figure 4
Closed Objective
Wide field of view
Figure 5
Extended Objective
Narrow field of view
Fully Extended
4
MAINTENANCE
Moisture
The IR-K2 Pro IR Illuminator is water resistant but not waterproof. Take care to protect
the device from excessive moisture to prevent damage to the internal electronics.
If the device gets wet from rain/drizzle, spill or splash remove the moisture with a
clean, dry cloth.
Dirt and Dust
To maintain smooth operation of the objective focusing mechanism (fig 5), avoid sand
and dirt. If sand or dirt gets into the objective of the device - compressed air can be
used to clear away any debris that has collected in the those areas. A clean dry cloth
can be used to remove any dust or residue.
Lens
The lens of the IR-K2 Pro can be cleaned with a clean dry cloth or lens paper. Avoid
spaying liquid lens cleaning solutions directly on to the device as moisture could cause
damage. Using a small about on a clean cloth or lens paper is permisible.
Battery / Battery Housing
To prevent corrosion, remove the battery from the device prior to storing for extended
periods. Use a clean dry cloth to clear away any dust that may accumulate in the
battery compartment.
Warning:
Improper care or unauthorized maintenance
can damage device and may result in warranty
nullification.
5
WARRANTY
The Night Optics USA, Inc. IR-K2 Pro IR Illuminator is covered by a limited 1 year warranty from time of sale.
The warranty is valid only for the original purchaser.
The manufacturer warrants its products to be free from defects in material and workmanship during the
warranty period. If the product proves to be defective during this period, the manufacturer will repair the
original product or replace it with a like product at the sole discretion of the manufacturer.
This limited warranty does not cover:
1. Any product on which the serial number has been defaced, modified, or removed.
2. Any product that has experienced deterioration or a malfunction from: accidents, misuse, neglect, fire,
water, lighting or other acts of nature, unauthorized product modification or failure to follow instructions
supplied with the product, repair or attempted repair by anyone not authorized to do so, use of supplies or
parts not meeting manufacturer’s specifications, normal wear and tear, and/or extreme wear and tear
caused by battlefield conditions or other extreme environments.
No other warranties, expressed or implied, are valid without an agreement in writing provided by the
manufacturer. All shipping involved in warranty work/replacement is the sole responsibility of the
purchaser.
LIMITATIONS OF LIABILITY
Night Optics USA, Inc. will not be liable for any claims, actions, suits, proceedings, costs, expenses, damages
or liabilities arising out of the use of this product. Operation and use of this product are the sole
responsibility of the Customer. Night Optics USA, Inc.’s sole responsibility is limited to providing the
products and service outlined herein in accordance with the terms and conditions of this Agreement.
The provision of products sold and services performed by Night Optics USA, Inc. to the Customer shall not
be interpreted, construed, or regarded, either expressly or implied, as being for the benefit or creating any
obligation toward any third party of legal entity outside Night Optics USA, Inc. and Customer; Night Optics
USA, Inc.’s obligations under this Agreement extend solely to the Customer.
Night Optics USA, Inc.’s liability hereunder for damages, regardless of the form or action, shall not
exceed the fees or other charges paid to Night Optics USA, Inc. by the Customer or the Customer’s
dealer. Night Optics USA, Inc. shall not, in any event, be liable for special, indirect, incidental, or
consequential damages, including, but not limited to, lost income, lost revenue, or lost profit,
whether such damages were foreseeable or not at the time of purchase, and whether or not such
damages arise out of breach of warranty, a breach of agreement, negligence, strict liability, or
any other theory of liability.
6
NOTES
NIGHT OPTICS USA, INC
15182 Triton Lane, Suite 101 | Huntington Beach, CA 92649
Ph: (714) 899-4475 | Fax: (714) 899-4485
[email protected] | [email protected]