D o You Se e W h at I Se e
By Leanne Anderson
Panel
A Free Project Sheet From
Finished Quilt Size: 32” x 51”
49 West 37th Street, New York, NY 10018
tel: 212-686-5194 fax: 212-532-3525
Toll Free: 800-294-9495
www.henryglassfabrics.com
Do You See What I See
Finished Quilt Size: 32” x 51”
Panel
Fabrics in the Collection
Houndstooth - Red
8293-88
Houndstooth - Green
8293-66
Houndstooth - Gold
8293-33
Holly - Red
8292-88
Holly - Blue
8292-77
Holly - Cream
8292-44
Poinsettia - Red
8291-88
Poinsettia - Green
8291-66
Poinsettia - Cream
8291-44
Character - Red
8290-88
Character - Green
8290-66
Border Stripe - Blue
8289-77
Starry - Red
8294-88
Starry - Green
8294-66
Starry - Tan
8294-44
Book Panel - Green
8288P-66
Advent Calendar Panel - Blue
8287P-77
Do You See What I See
Materials
1 panel
Advent Calendar Panel – Blue
⅝ yard
Houndstooth – Red
⅜ yard
Poinsettia – Red
⅓ yard
Holly – Red ⅓ yard
Character – Red
⅛ yard
Starry – Red ⅛ yard
Poinsettia – Green
½ yard
Starry – Green
⅛ yard
Character – Green
⅛ yard
Houndstooth – Green
⅝ yard
Starry – Cream
⅓ yard
Houndstooth – Gold ⅓ yard
Holly – Blue
1 ⅞ yards
Holly – Cream (Backing)
You will also need:
• Fusible Web
• Black Felt
8287P-77
8293-88
8291-88
8292-88
8290-88
8294-88
8291-66
8294-66
8290-66
8293-66
8294-44
8293-33
8292-77
8292-44
Cutting Instructions
Please note: all strips are cut across the width of fabric
(WOF) from selvage to selvage edge unless otherwise noted.
From the Advent Calendar Panel - Blue (A):
• Fussy cut (1) 22 ½” x 28 ½” panel.
• See instructions to cut (25) ornaments.
From the Houndstooth - Red (B), cut:
• (1) 13” x 22 ½” strip.
• (2) 1 ½” x WOF strips. Sub-cut strips into (56) 1 ½” squares.
From the Poinsettia - Red (C), cut:
• (2) 4 ½” x 22 ½” strips.
• (1) 2 ½” x WOF strip. Sub-cut strip into (7) 2 ½” squares.
Panel
Page 1
From the Houndstooth - Green (J), cut:
• (2) 1 ½” x WOF strips. Sub-cut strips into (48) 1 ½” squares.
From the Starry - Cream (K), cut:
• (4) 1 ½” x WOF strips. Sub-cut strips into (104) 1 ½” squares.
• (4) 2 ½” x WOF strips. Sub-cut strips into
(104) 1 ½” x 2 ½” strips.
From the Houndstooth - Gold (L), cut:
• (1) 4 ½” x WOF strips. Sub-cut strips into (12) 2” x 4 ½” strips.
• (1) 4 ½” x WOF strips. Sub-cut strips into
(14) 2 ½” x 4 ½” strips.
From the Holly - Blue (M), cut:
• (2) 2” x 41” strips.
• (2) 2 ½” x 25 ½” strips.
From the Holly - Cream (Backing), cut:
• (1) 59” x 40” strip for the backing.
Sewing Instructions
1. Fold (1) 4 ½” x 22 ½” Fabric C strip in half, lengthwise,
right sides together. Sew down the two short sides and
across the bottom, leaving an opening for turning. Turn right
side out and press to make (1) pocket strip. Repeat using the
second Fabric C strip, (2) Fabric D strips and (1) Fabric E
strip to make (5) pocket strips total.
2. Position one Fabric C pocket with the bottom edge (the
one with the seam opening) aligned with the bottom of the
13 ½” x 22 ½” Fabric B strip and pin the pocket in place
(Fig. 1). Using ⅛” seam and stitch the pocket down each
short side and across the bottom to attach the pocket.
From the Holly - Red (D), cut:
• (2) 4 ½” x 22 ½” strips.
From the Character - Red (E), cut:
• (1) 4 ½” x 22 ½” strip.
• (1) 2 ½” x WOF strip. Sub-cut strip into (6) 2 ½” squares.
From the Starry - Red (F), cut:
• (2) 1 ½” x WOF strips. Sub-cut strips into (48) 1 ½” squares.
From the Poinsettia - Green (G), cut:
• (1) 2 ½” x WOF strip. Sub-cut strip into (7) 2 ½” squares.
From the Starry - Green (H), cut:
• (2) 1 ½” x WOF strips. Sub-cut strips into (56) 1 ½” squares.
• (5) 2 ½” x WOF strips for the binding.
From the Character - Green (I), cut:
• (1) 2 ½” x WOF strips. Sub-cut strips into (6) 2 ½” squares.
Fig. 1
3. Position the remaining (4) pockets on the 13 ½” x 22 ½”
Fabric B strip, evenly spaced, with the opening in the seam
from step 1 toward the bottom. Top stitch the pockets in
place, using ⅛” seam allowance. This should stitch the seam
opening closed.
4. Measure across each pocket strip to divide the strip into
(5) even pockets. Top stitch down each pocket to make the
pockets.
5. Sew the pocket panel to the bottom of the 22 ½” x 28 ½”
Fabric A panel to make the center block.
Do You See What I See
6. Sew (1) 2” x 41” Fabric M strip to each side of the center
block. Sew (1) 2 ½” x 25 ½” Fabric M strip to the top and
to the bottom of the center block. Trim the block to measure
24 ½” x 43 ½” to make the quilt top.
7. Place (1) 1 ½” Fabric B square on the left side of (1)
1 ½” x 2 ½” Fabric K strip, right sides together (Fig. 2).
Sew across the diagonal of the square from the upper right
corner to the lower left corner (Fig. 2). Flip open the triangle
formed and press (Fig. 3). Trim away the excess fabric from
behind the triangle, leaving a ¼” seam allowance.
8. Place another 1 ½” Fabric B square on the right side of
the 1 ½” x 2 ½” Fabric K strip, right sides together (Fig. 4).
Sew across the diagonal of the square from the upper left
corner to the lower right corner (Fig. 4). Flip open the
triangle formed and press (Fig. 5). Trim away the excess
fabric from behind the triangle, leaving a ¼” seam
allowance to make (1) BKB unit.
make 28
Fig. 2
Fig. 3
Fig. 4
K
Fig. 5
9. Repeat Steps 7-8 to make (28) BKB units total.
10. Sew (4) 1 ½” Fabric K squares, (4) BKB units and (1)
2 ½” Fabric C square together to make (1) C-Star Block
(Fig. 6). Repeat to make (7) C-Star Blocks total.
make 7
K B K B K
B
K
B
C
B
B
K
K B K B K
Fig. 6
11. Follow Figure 7 and repeat steps 7-10 to make (7)
G-Star Blocks total.
make 7
K H K H K
H
K
H
G
H
K
H
K H K H K
Fig. 7
Page 2
Panel
12. Follow Figure 8 and repeat steps 7-10 to make (6)
E-Star Blocks total.
13. Follow Figure 9 and repeat steps 7-10 to make (6) I-Star
Blocks total.
make 6
K F K F K
make 6
K J K J K
F
K
F
J
K
J
E
F
F
K
K F K F K
Fig. 8
I
J
J
K
K J K J K
Fig. 9
Quilt Top Assembly
(Refer to the Quilt Photo while assembling.)
14. Sew (7) star blocks, (2) 2” x 4 ½” Fabric L strips and
(6) 2 ½” x 4 ½” Fabric L strips together to make (1) strip.
Repeat to make a second strip. Sew (1) strip to each side of
the quilt top.
15. Sew (6) star blocks, (4) 2” x 4 ½” Fabric L strips and (1)
2 ½” x 4 ½” Fabric L strip together to make (1) strip. Repeat
to make a second strip. Sew the strips to the top and to the
bottom of the quilt top.
16. Layer and quilt as desired.
17. Sew the (5) 2 ½” x WOF Fabric H strips together, end
to end with 45-degree seams, to make the binding. Fold this
long strip in half lengthwise with wrong sides together and
press.
18. Bind as desired.
Ornament Instructions
19. To make the ornaments, apply a fusible web to the
wrong side of the fabric. Cut around each characters,
keeping about ⅛” of background around the ornament. Take
the release paper off of the back side and lay the pieces,
bonding side down, on squares of felt, making sure to leave
approximately ¼” between the pieces. Cut pieces out,
leaving approximately ⅛” of felt around each ornament.
Take a 4” piece of ⅛” to ¼” ribbon (or twill tape), and form
a loop. Hot glue a loop to the backside of each ornament.
Place the ornament in the pockets of the ornament holder.
20. Sew buttons in the center of each star block on the quilt
from which to hang the finished ornaments.
©2014 Henry Glass & Co., Inc.