INDUSTRIAL TRAINING INSTITUTE, ROURKELA
QUOTATION CALL NOTICE
For supply of Equipments & furniture.
Dt.03.02.2012
Credit No: IDA 4319-IN
Quotation No.: ITIRKL/260/WB/11-12
The Principal, Industrial Training I n s t i t u t e , Rourkela
invites sealed Bid/ quotations from eligible reputed
manufacturer/authorized
Distributor/
dealers
for
supply of E q u i p m e n t & Furniture. Documents
containing the details of goods required package wise
with specification, quantity, terms & conditions may be
downloaded from the
website www.itirkl.org from
06.02.2012. The last date & time of receipt of bids
is up to 11.30 A.M on 28.02.12 and bids will be
opened on the same date at 2.00 P.M. The authority
reserves the right to accept/reject any part or all the
quotations without assigning any reason thereof.
Sd/Principal, ITI, Rourkela
BID/QUOTTION DOCUMENT
E-5
OFFICE OF THE PRINCIPAL, INDUSTRIAL TRAINING INSTITUTE,
ROURKELA, AT/PO-PANPOSH, ROURKELA-04, Dist: SUNDARGARH
VOCATIONAL TRAINING IMPORVEMENT PROJECT
IDA NO Credit No.4319-IN
PROCUREMENT OF GOODS(Tools & Equipments and Furniture) for
ITI, ROURKELA
UNDER VTIP WORLD BANK ASSISTED INCENTIVE SCHEME
UNDER
NATIONAL SHOPPING PROCEDURES
FOR UPGRADATION OF EXISTING & NEW TRADES
Quotation Enquiry No: ITIRKL/260/WB/11-12
Dated : 03.02.2012
Last Date & Time of Submission: 28.02.12 up to 11.30 AM
Date & Time of Opening: 28.02.12 at 2.00 PM
2/11
OFFICE OF THE PRINCIPAL, INDUSTRIAL TRAINING INSTITUTE, ROURKELA
AT/PO-PANPOSH, DIST-SUNDARGARH-769004
Tel. No-0661-2480428/2400312, Fax No-0661-2480428
QUOTATION FOR THE SUPPLY OF EQUIPMENTS & FURNITURE
Credit No. : IDA 4319-IN
Quotation No ITIRKL/260/WB/11-12
Dated 03.02.2012
1.
The Government of India has received a Credit from the International Development Association in various
currencies towards the cost of Vocational Training Improvement Project (Credit 4319-IN) and it is
intended that part of the proceeds of this credit will be applied to eligible payments under the contracts
for which this Invitation for /quotation is issued.
2.
The Principal, ITI, Rourkela now invites sealed bids/quotations from eligible bidders for supply of tools, Instruments,
Equipment, & Furniture., Bids/Quotation should be submitted separately for each schedule/package.
Schedule
Package
Brief Description of Goods
No of Items
Total Quantity
Of Items
Delivery
Period
Consignee
6
General Hasnd Tools
275
1959
60 days
ITI, Rourkela
7
Cutting Tools
Measuring
Tools
Welding & Safety Tools
Furniture
104
911
60 days
ITI, Rourkela
104
960
60 days
ITI, Rourkela
22
20
366
80
60 days
60 days
ITI, Rourkela
ITI, Rourkela
8
9
10
IMPORTANT INFORMATION
1.BID/QUOTATION REFERENCE
:- ITIRKL/260/WB/11-12
2. DATE OF COMMENCEMENT OF
:-07.02.2012
BIDDING DOCUMENT
3.LAST DATE FOR SALE OF BIDDING :- 28.02.2012
DOCUMENT
4.LAST DATE AND TIME FOR RECEIPT:-28.02.2012 11.30 AM
BIDS/QUOTATIONS
5.TIME AND DATE OF OPENING
:-28.02.2012 AT 2.00 PM
OF BIDS/QUOTATIONS
6. ADRESS FOR COMMUNICATION
:-OFFICE OF THE PRINCIPAL,INDUSTRIAL TRAINING INSTITUTE,
AND PLACE OF OPENING OF BIDS/
ROURKELA. AT/PO-PANPOSH,ROURKELA-4 DIST-SUNDARGARH(ORISSA)
QUOTATIONS
PIN-769004
Website:-www.itirkl.org
E-mail: [email protected],
Tel/Fax:-0661-2480428/24300312
Phone:0661-2480428
Complete documents containing the details of goods required package wise with specification, quantity ,terms and
from 06.02.2012 to 28.02.2012.The quotation
conditions may be downloaded from the Website:- www.itirkl.org
accompanying with all documents as mentioned in Bid/Quotation documents can be submitted by Speed Post/Regd.Post or
can be dropped in the sealed Quotation Box available in the Office of the Principal, ITI, Rourkela. Quotation should be
submitted separately for each package in stipulated date & time. The bids/Quotation will be opened on the same date in
the presence of bidders or their authorized representatives who choose to be present at the time of opening of bid/quotation.
Principal, ITI, Rourkela shall not be responsible for non-receipt or late receipt of bid/quotation document sent by post.
Bid/Quotation received late on account of any reason whatsoever will be rejected unopened. The authority reserves the
right to accept/reject any part or all bids without assigning any reason thereof. The cover containing the Bid/Quotation must
be subscribed with “Bid/Quotation No. ITIRKL/260/WB/11-12 FOR SUPPLY OF EQUIPMENTS AND
FURNITURE”.THE LAST DATE AND TIME: 28.02.2012 AT 11.30 AM
3/11
OFFICE OF THE PRINCIPAL, INDUSTRIAL TRAINING INSTITUTE, ROURKELA.
AT/PO-PANPOSH, ROURKELA-04, SUNDARGARH
Website:-www.itirkl.org
E-mail:[email protected]
Tel: 0661-2480428 / 2400312
To
___________________________________
___________________________________
___________________________________
SUB: INVITATION OF QUOTATIONS FOR SUPPLY OF TOOLS & EQUIPMENT AND
FURNITURE FOR ITI, ROURKELA ,
Dear Sirs,
You are invited to submit your most competitive quotation in enclosed format of quotation for
the following goods:Brief Description
of the Goods as in
Schedule No.
Specifications
Qty/
Nos.
Delivery
Period
Place of
Delivery
a)
Package No.6 (General
Hand Tools)
As per
Annexure-A
1959
2
Months
b)
Package No.7 (Measuring
Tools)
911
ITI, ROURKELA,
AT/POPANPOSH,ROU
RKELA-04,
SUNDARGARH
c)
Package N0.8 (Cutting
Tools)
960
d)
Package No.9 (Welding &
Safety Tools
366
e)
Package No.10 (Furniture)
80
Sr.
No.
2.
Installation
Requirement
if any
Installation
&
Démonstra
tion.
Government of India has received a credit from the International Development Association
(IDA) in various currencies equivalent to US$ 280 million towards the cost of the VTIP
Project and intends to apply part of the proceeds of this credit to eligible payments under the
contract for which this invitation for quotations is issued.
3.
Bid Price
a)
The contract shall be for the full quantity as described above. Corrections, if any, shall be made
by crossing out, initialing, dating and re writing.
b)
All duties, taxes and other levies payable on the raw materials and components shall be
included in the total price.
c)
Sales tax in connection with the sale shall be shown separately.
4/11
d)
The rates quoted by the bidder shall be fixed for the duration of the contract and shall not be
subject to adjustment on any account.
e)
The Prices shall be quoted in Indian Rupees only.
4.
Each bidder shall submit only one quotation against each schedule.
5.
Validity of Quotation
Quotation shall remain valid for a period not less than 45 days after the deadline date specified for
submission.
6.
Evaluation of Quotations
The Purchaser will evaluate and compare the quotations determined to be substantially responsive i.e.
(a)
Which are properly signed and
(b)
Conform to the terms and conditions, and specifications.
The Quotations would be evaluated separately for each item.
Sales tax in connection with sale of goods shall not be taken into account in evaluation.
7.
Award of contract
The Purchaser will award the contract to the bidder whose quotation has been determined to be
substantially responsive and who has offered the lowest evaluated quotation price.
7.1
Notwithstanding the above, the Purchaser reserves the right to accept or reject any quotations
and to cancel the bidding process and reject all quotations at any time prior to the award of
contract.
7.2
The bidder whose bid is accepted will be notified of the award of contract by the Purchaser prior
to expiration of the quotation validity period.
The terms of the accepted offer shall be
incorporated in the purchase order.
8.
Payment Terms
100% payment shall be made after receipt of stock entry certificate from the Consignee Principal which
shall be made by the Consignee after satisfactory supply, installation, demonstration & training of the
goods within due date of delivery..
9.
Normal commercial warranty/ guarantee shall be applicable to the supplied goods.
10.
You are requested to provide your offer latest by 11.30 AM on 28/02/2012
11.
We look forward to receiving your quotations and thank you for your interest in this project.
PRINCIPAL,
INDUSTRIAL TRAINING INSTITUTE,
ROURKELA.
5/11
FORMAT OF QUOTATION
Schedule No.: __________
Sl.
No.
Description of
Goods
Specifications
Qty.
Unit
Quoted
Unit Rate
Total Amount (in Rs.)
In Figures
In Words
TOTAL
Sales Tax / VAT
Gross Total Cost : Rs. ..........................
We agree to supply the above goods in accordance with the technical specifications for a total
contract price of Rs........................... (amount in figures ) (Rupees ......................................... )
(amount in words) within the period specified in the Invitation for Quotations.
We also confirm that the normal commercial warrantee/guarantee of 12 months shall apply to
the offered goods.
We hereby certify that we have taken steps to ensure that no person acting for us or on our
behalf will engage in bribery.
Signature of Supplier
6/11
SPECIAL CONDITION
1)
Liquidity damages
The penalty clause also will be applicable in case of late delivery of Stores the rate of
liquidity damages shall be 0.5% per week and the maximum deduction is 10% of the
contract.
2)
Performance Security
i.
Within 15 days after the Supplier’s receipt of Notification of Award, the Supplier
shall furnish Performance Security to the Purchaser as enclosed at Annexure-I
for an amount of 5% of the contract value, valid up to 60 days after the date of
completion of Performance obligations including warranty obligations.
ii.
The proceeds of the performance security shall be payable to the Purchaser as
compensation for any loss resulting from the Supplier's failure to complete its
obligations under the Contract.
iii.
The Performance Security shall be denominated in Indian Rupees and shall be
in one of the following forms:
(a)
A Bank Guarantee issued by a nationalized bank located in India in the
form provided in the bidding documents acceptable to the Purchaser, or
(b)
A Demand Draft issued by a nationalized bank located in India
acceptable to the Purchaser
The performance security will be discharged by the Purchaser and
returned to the Supplier not later than 30 days following the date of
completion of the Supplier's performance obligations, including any
warranty obligations.
3)
Authorization from Manufacturer
In the case of a Bidder offering to supply goods under the contract which the Bidder
did not manufacture or otherwise produce, the Bidder has been duly authorized by the
goods' Manufacturer or producer to supply the goods in India. Bidders shall furnish
the manufactures authorization certificate in prescribed format as annexed at
Annexure-II (Enclose detail Technical Literature/ Brochure of the Product quoted)
4)
Proof of Manufacturing and Past Performance
Details of experience and past performance of the bidder on equipment Offered and
on those of similar nature within the past one year and details of Current contracts in
hand and other commitments as enclosed at Annexure-III
5)
DELVIERY OF GOODS/CONSIGNEE:
7/11
The material shall be delivered at I.T.I., Rourkela, At/Po-Panposh,Rourkela-04, Dist:
Sundargarh within 60 (Sixty) days from the date of issue of Purchase Order. The
goods on delivery will be physically verified by the Consignee Principal of ITI,
Rourkela through local Technical Experts of his Institute and it shall be responsibility
of the suppliers to arrange demonstration on functioning of individual Goods wherever
required.
8/11
ANNEXURE-I
PERFORMANCE SECURITY FORM
To
The principal,
Industrial Training Institute, Rourkela
At/Po-Panposh, Rourkela-04, Sundargarh
WHEREAS ................................................................... (Name of Supplier) hereinafter called "the
Supplier" has undertaken, in pursuance of Contract (Notification of Award) No................. dated,........... 20... to
supply....................................................................... (Description of Goods and Services) hereinafter called "the
Contract".
AND WHEREAS it has been stipulated by you in the said Contract that the Supplier shall furnish you with
a Bank Guarantee by a recognized bank for the sum specified therein as security for compliance with the
Supplier's performance obligations in accordance with the Contract.
AND WHEREAS we have agreed to give the Supplier a Guarantee:
THEREFORE WE hereby affirm that we are Guarantors and responsible to you, on behalf of the Supplier,
up to a total of .................................................................... (Amount of the Guarantee in Words and Figures) and
we undertake to pay you, upon your first written demand declaring the Supplier to be in default under the
Contract and without cavil or argument, any sum or sums within the limit of ................................ (Amount of
Guarantee) as aforesaid, without your needing to prove or to show grounds or reasons for your demand or the
sum specified therein.
This guarantee is valid until the ........day of...................20......
Signature and Seal of Guarantors
................................................................
................................................................
Date......................20....
Address:........................
................................................................
Note: The Bank Guarantee [submitted by Indian Supplier] should be executed on stamp
paper in accordance with stamp paper act. The stamp paper should be in the name of
executing bank.
9/11
ANNEXURE-II
MANUFACTURES’ AUTHORISATION FORM
No.___________/
Date ______________
To
The principal,
Industrial Training Institute, Rourkela
At/Po-Panposh, Rourkela-4, Dist: Sundargarh
REF: BID/QUOTATION NOTICE No. ITIRKL/260/WB/11-12.
Dear Sir,
We __________________________________________________ who are established and
reputable manufacturers/ authorized distributors/ dealers of _________________________ having
office at _______________________________________________________________ (Address of
office) hereby authorize M/s.___________________________________ (Name and address of
Agent) to submit a bid and sign the contract with you against the above bid.
No company or firm or individual other than M/s._____________________________ are
authorized to bid and conclude the contract in regard to this business against this specific IFB.
We hereby extend our full guaranty and warranty as per general conditions of contract for the
goods and services offered by the above firm against this bid.
Yours faithfully,
(Signature for and on behalf of manufacturers/authorized distributors/ dealers)
Note: This letter of authority should be on the letterhead of the manufacturers/authorized distributors/
dealers and should be signed by a person, competent and having the power of attorney to
bind the manufacturers/authorized distributors/ dealers. It should be included by the Bidders
in its bid.
10/11
ANNEXURE-III
PERFORMANCE STATEMENT
(In proof of eligibility of bidders for the period of last three years)
Order placed by
the organisation
with address
Order No.
& Date
Stores
ordered
Value of
order
Date of
completion
of delivery
Remarks
indicating
reasons for late
delivery, if any
If the equipment are giving
trouble free service.(Attach a
certificate from the Purchaser/
Consignee wherever applicable
Signature of bidder
11/11
Foundryman
2
2
2
6
2
Adjustable spanner 38 cm long.
1
1
1
3
3
Allen hexagonal keys 2.5 to 12
2
2
2
6
4
Allen Keys 1/16" to 1/2" x 1/32"
5
Angle plate 10 x 20cm
2
4
6
Angle plate adjustable 250 x 150 x 175mm
2
2
7
Angle plate size 200 x 100 x 200 mm
2
8
Angle Plate with slosts 200mm
9
Angle truing attachment
LACP
Adjustable spanner 300 mm
ITEM Name
AOCP
TURNER
1
Sl. No.
FITER
MACHINIST
ELECTRICIAN
LIST OF GENERAL TOOLS FOR EXISTING & NEW TRADES
ITI, Rourkela (Package No.6)
2
2
Total Qnty
2
6
2
6
2
6
2
2
1
1
2
10 Anvil 1 cwt.
2
11 Anvil 50 kg.
2
12 Anvil stand 250*250*450mm
2
13 Arm strong type tools bit holder L.H.
2
2
14 Arm strong type tools bit holder R.H.
2
2
15 Arm strong type tools bit holder straight
2
2
16 Ball Pein hammers 650 to 700 gms
4
17 Base chuck for slotter
2
2
4
20 Bradawl 100 mm
4
1
18 Boring Tool holder foe 6 mm. sq. tool bit 19 Box spanner set 6‐25mm set of 8 with Tommy bar.
4
4
1
12
1
16
1
12
1
3
34
34
21 Brick layers hammer 20 cm
2
2
22 C Clamps 20 cm
8
8
23 C Clamps 30 cm light duty steel
4
4
24 Carbide tipped tools of different sizes and shapes (Throw away tips)
Foundryman
LACP
AOCP
TURNER
MACHINIST
ELECTRICIAN
ITEM Name
FITER
Sl. No.
2
Total Qnty
2
25 Carbide wear block 1 mm – 2mm
2
2
26 Card file 50mm * 150mm
8
8
27 Chain wrench 3" pipe /75 mm
2
28 Clamp ‘C’10 cm
2
29 Clamp ‘C’5 cm
2
2
4
2
4
2
30 Clamp holders
48
48
31 Clamp tool maker 5 cm and 7.5 cm set of 2
2
2
32 Clamps C 200 mm
2
2
33 Claw hammers 0.75 Kg.
8
34 Collapsible Tap with attachment 1
35 Combination Drill A‐2.5 and A‐1.
1
13
36 Combination plier 150 mm
4
17
12
37 Combination set 300 mm
2
38 Comparator stand with dial indicator LC 0.01mm
1
39 Compound angle vice (standard sine)
1
8
12
3
2
8
1
1
1
40 Compound dial gauge with stand (Metric)
1
1
41 Conventry Type Die Head (Self cpening 1
1
1
42 Core hardness tester 44‐CHT
43 Crimping tool 0.05 mm 2 to 6mm 2
2
2
44 DE. Spanner from 5/8" x 11/16" to 15/16" to 1" whitworth sizes
45 Depth Gauge Micrometer 0 to 150mm reading 0.01mm
2
1
46 Dial Teast Indicator 0.01 mm with Vernier Height Gauge 300 mm
47 Dial test indicator .01 mm on stand
48 Dial Test Indicator 0.01mm with magnetic base
49 Double ended spanners ‐set of 7 whitworth sizes from 1/8" x 3/16" to 1/2" x 9/16"
1
1
2
6
7
1
1
1
2
1
1
1
1
Foundryman
LACP
AOCP
TURNER
MACHINIST
ELECTRICIAN
ITEM Name
FITER
Sl. No.
Total Qnty
50 Double ended spanners set of metric sizes from 8x9 to 20 x 22
1
1
51 Double ended spanner‐set of 7A/F sizes from 3/8 : x 7/16" to 15/16" x 1"
1
1
52 Double offset double ended ring spanners set of 7 whitworth sizes from 1/8" x 3/16" to 1/2" x 9/16"
1
1
53 Drift 2
54 Drill (Paralles shank) 1 to 13 mm by 1mm
55 Drill chuck 0.20 mm with taper shank
56 Drill Chuck 6 to 12mm cap.with key 2
2
2
4
1
1
1
57 Drill HSS taper shank 12 to 10mm by 0.05 mm
2
2
3
1
3
58 Drill twist (straight shank) 1/8"to 1/2" by 1/64"(set)
4
4
59 Drill twist /½" to 3/4 by 1/16"(Mores taper)
1
1
60 Drill twist s/s 1. 5 to 12mm by 0.5mm
1
1
61 Drill twist s/s 8 mm to 15 mm by ½ mm
1
1
62 Drill twist T/S 6mm to 25 mm x 1.5mm
1
1
63 Drills straight shank letter gauge sizes A to Z with gauge
1
1
64 Drills straight shank wire gauge sizes 1 to 60 with gauge
1
1
65 Drills twist(Metric) 2mm to 7 mm by 1 mm
6
6
66 Drills twist(Metric) 8 mm to 12 mm by 1 mm
1
1
67 Earth clamps.
2
2
68 Edge Smoother 16.25 mm
34
69 Electrician connector, screw driver 100mm insulated handle thin stem. 34
70 Engineers screw driver
71 Extractor stud EZY‐Out
34
34
12
12
2
2
72 Face shield clear
8
8
73 Flat rammer 75 mm x 25 mm hight
34
34
74 Flate surface 45 cm x 45cm CI/Granite
2
2
75 Flatters(rodded)55 mm square
2
2
Foundryman
76 Folding rule 60 cm
LACP
AOCP
TURNER
MACHINIST
ELECTRICIAN
ITEM Name
FITER
Sl. No.
Total Qnty
4
4
77 Forge portable hand blower 38cm to 45cm
1
1
78 Fuller top & bottom 6 mm, 9 mm(pair)
2
2
79 Glass magnifying 7mm
2
2
80 Growler 230 volt
1
1
81 H.S.S. hand taper pin reamer 1/2"to 5/8" by 1?16"
1
1
82 H.S.S. Machine reamers 3 to 12 mm by 1mm
1
1
83 H.S.S. Machine reamers 3 to 19 mm 1
1
84 H.S.S.Machine reamers with M.T. shank 1/8'to 3?4:by 1/16"
1
1
85 Hammer B.P. 0.5 kg.
17
2
86 Hammer B.P. 800 gms, with handle
87 Hammer ball peen 0.22kg. with handle
12
17
88 Hammer ball pein 0.75 kg with handle
8
6
18
13
30
34
34
89 Hammer bell pain 1/2 lb
34
90 Hammer copper / brass 500 gm with handle
12
91 Hammer hide faced
93 Hammer smith 2 kg. With handle
2
2
2
2
2
94 Hammer smith 4 lbs. With handle
2
95 Hammer, cross pein 115grams with handle
34
12
2
92 Hammer lead 1 kg
27
34
2
34
96 Hand Chaser M ‐12 & m ‐ 16 (External)
2
2
97 Hand Chaser M ‐12 & m ‐ 16 (Internal)
2
2
98 Hand hammer 1 kg with handle
2
99 Hand hammer 2 lab with handle
2
4
2
2
100 Hand Reamer adjustable cover max. 9 mm,12mm & 18 mm set of 3
1
1
101 Hand Reamer tapers 4 mm to 9‐mm set of 6 or 4‐7mm set of 4.
1
1
103 Hand Vice 1/25 mm
Foundryman
102 Hand saw 15"
LACP
AOCP
TURNER
MACHINIST
ELECTRICIAN
ITEM Name
FITER
Sl. No.
Total Qnty
1
1
4
104 Hand vice 50 mm jaw
4
2
105 Hardle with tang
2
106 Heart and square trowels 3 x 1.2 x1.2 cm
1
107 Heavy duty screw driver 200mm 2
2
4
34
34
35
34
108 Hot set rodded 25x200mm
Interchangeable ratchet socket set with a 12 mm driver, sized 10‐32mm set of 18 socket & 109
attachments.
110 Iron soldering 350 gm
1
1
1
1
2
2
111 Knurling tool revolving head (Rough,med.,fine)diamond and straight
12
112 Lamp blow 0.55 liters
2
2
113 Level sprit 15 cm metal
1
1
3
114 Limit plug gauges 5 mm to 25 mm by 2.5 mm
15
1
1
115 Livers spring 6"/15 cm
34
34
116 Logarithmic slide rule made by Faber, Germany
1
1
117 Lugs for cable.
12
12
1
118 Machine Chaser M‐12 to M‐21( Std. seriers)
119 Machine vice 10 cm
3
120 Machine vice 15 cm
1
1
1
4
1
121 Machine vice 160 mm swivel base
2
2
122 Machine vice 200 mm swivel base
4
4
123 Magnatic Chuck 150mm dia. (Circulator type)
1
124 Magnifying glass 75 mm
2
1
1
3
125 mallets‐various
16
16
126 Mandrels 5" x 1/2", 6" x 3/4"
1
1
127 Masons tool trawls of various types
1
2
2
130 Mould Green Hardness Tester‐dial type‐Risdale diels st.
1
131 Neon Tester 250 volt
34
132 Number drills HSS (Parallel shank)
1
34
1
1
2
2
134 Oil Can 1/2 pint ( pressure feed system)
12
135 Oil cane pressure feed 500 mg.
Total Qnty
1
1
129 Morse taper sleeves No.0 to 1,1to 2,2 to3,3 to 4,4 to 5,1 to 3. 12
6
6
136 Oil Stone 12 mm sq. X 100 long fine. 137 Oil Stone 150*50mm*25mm
Foundryman
1
128 Morse Taper Plug & Ring Gauge no. 0 to 7 MI.
133 Oil Can 0.25 litter
LACP
AOCP
TURNER
MACHINIST
ELECTRICIAN
ITEM Name
FITER
Sl. No.
12
4
12
2
138 Out Surface plate 12"x 12"/60cm x60cm
6
1
139 Outside spring caliper 200 mm
1
2
2
140 Pag rammer
34
141 Parting Tool holder with H.S.S blade 12
34
12
142 Phillips headscrew driver set 1‐4 sizes
1
1
143 Pin spanner 1" to 3" dia
1
1
144 Pincer 150 mm
34
34
145 Pipe vice 100mm
2
2
146 Pipe bender spool type up to 25mm with stand manually operated.
1
1
147 Pipe bending springs 1/2"
4
4
148 Pipe bending springs 3/4"
4
4
149 Pipe bending springs 5/8"
2
2
150 pipe bending springs 8"/20 cm
4
4
151 Pipe vice 3"/75 mm
2
2
152 Pipe wrench 30 cm
1
1
153 Pipe wrench 40 cm
1
Foundryman
LACP
AOCP
TURNER
MACHINIST
ELECTRICIAN
ITEM Name
FITER
Sl. No.
Total Qnty
1
154 Pipe wrench stilton pattern 18" long
2
2
155 pipe wrench stilton pattern 6", 12", 24" long
2
2
156 Planishing hammer
2
157 Plier insulated 150 mm
158 Pliers combination 15cm
2
34
34
2
2
159 Pliers‐combination 8"/20 cm
16
16
160 Pneumatic tools
1
1
2
4
161 Poker
2
162 Portable handrail (electric) 0 to 6mm
2
163 Prick punch 100mm.
2
164 Punch centre 150 mmx9mm
2
13
15
34
34
165 Punch figer set 3mm.
2
2
166 Punch hollow 6mm to19 set of 5
2
2
167 Punch letter 3mm set
1
1
168 Punch letter set 3mm.
2
2
169 Punch number set 3mm
1
1
170 Punch round 3mm x 4mm set of 2
2
2
171 Radius gauge metric set (1‐6mm)
172 Reamer Adjustable 10 to 20 mm
1
173 Reamer Machine Straight Flute 6 to 25mm by 1mm 174 Reamer parallel 12‐16mm set of 5
1
2
3
1
1
3
1
1
2
1
1
175 Screw driver 12"x1/2" blade
176 Screw driver 15 cm
177 Screw Driver 200 & 300 blade heavy duty.
178 Screw driver 3"x3/8" blade
34
34
34
34
4
2
6
34
34
4
181 Screw drivers 25 cm with 15 mm blade
4
4
17
182 Screw extractors sizes 1 to 3 183 Setting hammer with handle
2
184 Shaper indexing centre
LACP
4
AOCP
180 Screw drivers 18 cm
TURNER
18
179 Screw drivers 15 cm
MACHINIST
Foundryman
ELECTRICIAN
1
ITEM Name
FITER
Total Qnty
Sl. No.
1
1
2
4
1
185 Shaper tool holder turret type
1
2
2
186 Shovel
2
2
187 Sine bar 125 mm,
1
1
188 Sine bar 200 mm
189 Sine bar 250 mm
1
1
2
1
1
2
190 Sledge Hammers 8 Kg.
191 Sleeve drill Morse 0‐1, 1‐2, 2‐3.
1
2
1
192 Slitting saw 3 mm, 5 mm, 6 mm thick
6
6
193 Slotter 16" storks motorized
1
1
194 Slotter 9" stroke motorized
1
1
195 Smith’s square 45cm x 30cm
1
1
196 Smiths brass rule 24", 2 fold
2
2
197 Smiths square
1
1
198 Smoother round corner
1
34
35
199 Smoother square corner
1
34
35
1
1
200 Snap flast 40 x 35 x 12 cm RSDL
201 Snip bent 25 cm
2
202 Snip straight 10"/25cm
203 Snips straight 25 cm
204 Socket set 1/2" drive, 3/8" to 1 1/4" with ratchet handle
2
2
2
2
2
1
1
205 Solid parallels in pairs (different sizes) in metric
206 Spanner adjustable 15 cm
Foundryman
Total Qnty
12
2
2
2
8
2
7
209 Spanneradjustable 200 mm
210 Spare Grinding Wheel Ajax type for carbide tool
2
17
2
2
2
2
211 Spatulus nickel
20
212 Spindle blade screw driver 100 mm 213 Spindle key for cylinder valve.
LACP
AOCP
TURNER
MACHINIST
12
207 Spanner D.E. metric standard set of 12 Nos.
208 Spanner whit –worth DE 6mm to 26 mm set of 10 pcs
ELECTRICIAN
ITEM Name
FITER
Sl. No.
4
20
4
2
2
214 Squat engineer 6" blade /15cm
34
34
215 Stake grooving 150mm
2
2
216 Stake hatchet 50mm
2
2
217 Stands 48
48
218 Stands with clamps for burettes
24
24
219 Stilson wrenches 25 cm
2
2
220 Stone carborandum15cm x 5cm x 5cm x 4cm
2
2
221 Straight edge 45 cm steel
2
2
222 Straight edge steel 1 metre
1
1
223 Straight edge steel 5 metre
1
1
224 Swage block 35 x 35 x 12 cm
1
1
225 Swages top & bottom 12 mm/19
1
1
226 Table chuck 75 mm jaw swivel base
1
227 Tamer 30cm
1
228 Tap & die B.A.No. 0 to 10 in a box 1
1
1
1
2
229 Tap & Die B.S.F.upto 1"
1
1
230 Tap & Die B.S.W.upto 1"
2
2
231 Tap & die Metric set upto 25 mm 232 Tap and die set in box metric pitch
Foundryman
LACP
AOCP
TURNER
MACHINIST
ELECTRICIAN
ITEM Name
FITER
Sl. No.
2
1
Total Qnty
2
1
2
233 Tap extractors 1/8" to 1/2" by 1/16"
1
1
234 Tap Wrench (adjustable)
2
2
235 Taper gauge m.T. No. 1,2,3,4,5
1
1
236 Taper shank twist drill set 6.30 mm x 1.5 mm to suit radial drilling machine
1
1
237 Taper trowel 18 cm round
1
34
238 Taps and dies complete set in box B.A.B.S.F.B.S.W., American and metric
239 Taps dies complete set in box with ‐worth
16
1
240 Telescopic gauge 13 mm to 300 mm
35
16
1
1
1
241 Thrade ring gauge M‐20 & M‐21
1
1
242 Thread Plug Gauge M‐20 &M‐21
1
1
243 Tip cleaner.
10
244 Tongs flat 350mm
2
245 Tongs roving 350mm
2
10
2
4
2
12
246 Tool Bit assorted sizes on holder 247 Tool bit holder as armstrong R.H.
12
4
4
248 Tool bits 12 mm. sq.X 150 assorted shaped 12
12
249 Tool Cemented carbide assorted shaped (External) for steel turning ‐set of 12
12
250 Tool Holdert RH & straight for 6mm aquare tool bit 12
251 Tool makers buttons
12
1
1
252 Tools bit holder (Amstrong) L.H.
4
4
253 tools bit holder (Amstrong) R.H.
4
4
254 tools bits holder( Amstrong) L.H
4
4
255 Tools bits HSS 10 mm square
1
1
256 Tools bits HSS 6 mm square
1
1
257 Tool's Maker button 150mm
Foundryman
LACP
AOCP
TURNER
MACHINIST
ELECTRICIAN
ITEM Name
FITER
Sl. No.
1
Total Qnty
1
258 Tools Spoon 32 x 16 mm ‐25 x 6m
34
34
259 Trowel c 125 IS :6013
8
8
260 Trowel double scoop
1
34
35
261 Trowel double square
1
34
35
262 Trowel heart and scoop
1
34
35
263 Trowel square and scoop
1
34
35
264 Universal table angle plate 1
265 universal vice
266 Univesral scrabing block 22 cm
1
1
1
2
267 Vee Block 100/7‐80‐A
2
2
268 Vee block 75 and125 mm with clamp
2
1
1
269 vice bench 12 cm Jaw
16
6
22
270 Vice leg 10 cm jaw
2
2
271 Water pump plier 250mm.
2
2
272 Weighing machine 300 Kg by 100 gms.
273 Wheel dresser (one for 4 units)
1
1
1
1
274 Wheel Dresser Diamond (instart‐0.75 or 1 carat)
2
2
275 Wheel Dresser Huntingon‐type with star cutter
2
2
TOTAL= 267 379 195 168 330 143 477
1959
Foundryman
LACP
AOCP
TURNER
MACHINIST
ITEM Name
ELECTRICIAN
Sl. No.
FITER
LIST OF CUTTING TOOLS FOR EXISTING & NEW TRADES
ITI, Rourkela (Package No.7)
Total Qnty
1 Adjustable pipe chain tonge to take pipes from upto 300mm.
1
1
2 Adjustable pipe tap set BSP with die set cover pipe size15,20,25,32,38,50cm
1
1
3 Carpenters chisel sets
4
4
4 Carpenters Mallets
1
1
5 Carpenters planes
4
4
6 carpenters saws
4
4
7 Carpenters, ratchet brace with 1/2" screw driver bit and No. 4 Philips head bit
2
2
8 Center gauge 55 deg. And 60 deg. 1
1
0
9 Center Gauge com. 60 and 55
10 Chipping hammer 24 mm
0
1
6
7
2
2
11 Chisel 200 x 15 mm
8
8
12 Chisel cold 10
17
17
13 Chisel cold 19 mm flat
8
8
14 Chisel cold 9 mm cross cut 9‐mm diamond.
8
8
15 Chisel cold 9 mm round noze
8
8
16 Chisel Cold flat 1"/2.5cm
34
34
17 Chisel cold flat 1/2 inch 1
1
8
18 Chisel Cold Flat 2 x 22 cm
8
19 Chisel cross cut 1/4"/6mm
2
2
20 Chisel cross cut 3/8" x 1/8"
34
34
21 chisel flat 20mm
6
22 Chisel Half round 3/8"/10mm
23 Cold chisel flat 25 x 200 mm
6
34 34
12
68
12
24 Cold set rodded 25x200mm
Foundryman
LACP
AOCP
TURNER
MACHINIST
ELECTRICIAN
ITEM Name
FITER
Sl. No.
2
2
25 Cutting Pliers 200 IS :3650
4
26 Cylindrical cutter 63 x 90 bore dia
27 Cylindrical cutter 80 x 90 bore dia
28 Double angle unequal cutter 100 x 36 x 75
29 Double angle unequal cutter 50 x 12 x 55 0
0
0
30 Double angle unequal cutter 63 x 18 x 60
31 Double angle unequal cutter 80 x 32 x 70 0
0
32 Equal angle cutter 45 /100
33 Equal angle cutter 600/100
Total Qnty
4
3
3
2
2
1
1
2
2
2
2
2
2
2
2
2
2
34 Equal angle cutter 90°/100
2
1
2
35 Feeler gauge 10 blades
1
2
6
10
36 File cut saw 15 cm smooth
4
4
37 File feather edge 15 cm smooth
4
4
38 File flat 10" smooth
2
2
39 File flat 10"2nd cut
2
2
40 File flat 12" blustered
2
2
41 File flat 20 cm bastard
8
8
42 file flat 250 mm 2nd cut 17
12
6
43 File flat 30 cm bastard
8
12
6
44 File flat 30 cm second cut
8
35
45 File flat 6" smooth
1
46 File Flat smooth 200 mm
16
47 File half round 150 mm smooth 4
49 File half round 2nd cut 250 mm
8
34
8
16
1
16
12
48 File half round 25 cm bastard
8
12
4
4
6
6
24
Foundryman
LACP
AOCP
TURNER
MACHINIST
ELECTRICIAN
ITEM Name
FITER
Sl. No.
Total Qnty
50 File Half Round 30 cm Bastard
8
8
51 File half round 30 cm Second cut
4
4
52 File half round second cut 15cm
17
17
53 File hand 15 cm second cut
8
8
54 File handles
96
96
55 File knife 15 cm smooth
4
4
56 File round 20 cm second cut
8
8
57 File round 30 cm bastard 4
4
6
58 File round 8" x 2nd cut 8" x/20 cm
6
59 File square 15 cm second cut
4
4
60 File square 25 cm second cut
4
4
61 File square 2nd cut 250 mm 62 File Swiss type needle set of 12
4
2
4
1
3
63 File three square 6" and cut 1
1
64 File traiangular 2nd 200mm
8
65 File triangular15 cm smooth
2
2
66 File warding 15 cm smooth
4
4
67 Fire buckets
2
2
68 Firmer chisel wood 12 mm
4
12
34
69 Grinding wheel dresser (diamond)
34
1
70 Grinding wheel dresser Huniting time type
1
2
71 Hacksaw 30 cm adjustable
2
72 Hacksaw frame 200 mm, 300 mm adjustable
2
6
8
4
16
4
73 Hacksaw frame adjustable for 8'to 12 blades
6
6
74 Hacksaw frame adjustable with pistle grip for 8"‐12" blade /20 cm‐30cm
34
34
75 Hacksaw frame fixed 30 cm
17
17
Foundryman
LACP
AOCP
TURNER
MACHINIST
ELECTRICIAN
ITEM Name
FITER
Sl. No.
Total Qnty
76 Lathe tools bit 6 mm x * 75 mm
12
12
77 Lathe tools bit 7 mm x * 75 mm
12
12
78 Lathe tools bit 9 mm x * 85mm
12
12
79 Pipe cutter 6 mm to 50 mm wheel type
1
1
80 Pipe cutter, 3 wheel type, 3" pipe
1
1
81 Pipe die set complete with die stock & bushing for piper from 1/8" to 1" dia
1
1
82 Plain milling cutter 65 x 100 x 27 mm bore
2
2
83 plier cutting 200 mm
2
84 Plier side cutting 150 mm
2
34
34
85 Pliers flat nose 150 mm side cutting 2
86 Saw tenon 250 mm
4
2
34
34
87 Scraper 3 corner 15 cm
8
8
88 Scraper flat 15 cm
8
8
89 Scraper half 10"/25 cm
2
2
90 Scraper half round 10"/25 cm
1
1
91 Scraper half round 15 cm
8
8
92 Scraper hook type 10" handied
2
2
93 Scraper tringular 10"/25 cm
2
2
94 Side and face cutter A 100x10
2
95 Side and face cutter A 200 x 20
2
3
3
96 Side and face cutter B 100 x 12
2
2
97 Side and face cutter B 160 x 10
3
3
98 Side and face cutter B 160x16
2
2
99 Side and face cutter B 80 x 8 2
2
100 side and face cutter different sizes
101 Single angle cutter 63 x 18 x 450 LH
2
1
2
1
Foundryman
LACP
AOCP
TURNER
MACHINIST
ELECTRICIAN
ITEM Name
FITER
Sl. No.
Total Qnty
102 Single angle cutter 63 x 18 x 450 RH
103 Single angle cutter 63 x 18 x 600 LH
1
1
2
2
104 Single angle cutter 63 x 18 x 600 RH
1
1
TOTAL = 254 106 111 52 296 34 58
911
Foundryman
LACP
AOCP
TURNER
MACHINIST
ITEM Name
ELECTRICIAN
Sl. No.
FITER
LIST OF MEASURING TOOLS FOR EXISTING & NEW TRADES
ITI, Rourkela (Package No.8)
Total Qnty
1
Angel Gauge for tool grinding
6
6
2
Angle Gauge 290mm
2
2
3
Bevel gauge 200 mm
4
Bevel protractor
5
Caliper 15 cm hermaphrodite
6
Caliper 8" inside
7
Caliper in side firm and spring joint 150mm
8
Caliper inside 15 cm
9
Caliper inside 6 inch spring
6
6
10 Caliper inside spring 6"/15 cm
34
34
1
1
2
17
6
23
2
4
6
4
13
12 Caliper out side spring joint 150mm
34
6
13
14 Caliper transfer inside 150 mm 4
17
17 Centre drill A‐1 to 5
12
13
2
4
4
34
76
2
18 Centre Punch 15 cm
8
20 Die Handle 300mm
21 Direct reding vernier caliper b 300 (Direct reading with dial)
6
2
8
1
2
2
2
1
17
25
6
2
1
18
53
2
15 Cane Oil 1/2 Lt
23 Divider spring 200 mm
4
6
13 Caliper outside 6 inch spring
22 Divider 15 cm spring
13
4
4
19 Dial vernier caliper 0‐200 mm L.C.O 0.05 mm ( Universal type)
2
13
11 Caliper odd leg
16 Center punch 100mm.
2
1
13
36
2
25 Dog carrier 235,50, and 75 mm
26 Dot slot punch 10 cm
LACP
Total Qnty
34
35
12
12
17
27 Electrician screw driver 250 mm thin stem insulated handle
28 Engineer’s try square (knife‐ wedge) 150mm blade.
AOCP
1
Foundryman
24 Dividers firm joint 20 cm
TURNER
MACHINIST
ELECTRICIAN
ITEM Name
FITER
Sl. No.
17
34
34
1
1
29 Engineer’s try square (knife‐ wedge) 150mm blade.
1
1
30 Engineering Ratchet brace with universal drilling pillar
1
1
31 Engineers try square 15 cm
32 Gas lighter.
4
6
4
6
2
33 Gauge Drill Grinding 180 c
34 Gauge for ginning and setting screw cutting tools
2
2
2
35 Gauge imperial sheet
1
1
36 Gauge plug single 3 ended 5 to 55 by 5 mm set of 11 pcs.
1
1
37 Gauge slip as Johnson metric set
1
1
38 Gauge snap Go and not Go 25 to 50 mm by 5 mm, set of 6 pcs.
1
1
39 Gauge telescopic upto 150mm
1
1
40 Gauge wire imperial 0 to 50 2
2
41 Gear puller 8" dia. Capacity at 3 leg type
1
42 Inside spring caliper 200 mm
43 Micrometer inside 25 mm to 50 mm with 25mm test pcs.
2
1
1
2
2
3
44 Micrometer outside 50 mm to 75 mm , 75 mm to 100 mm
1
1
45 Micrometer , outside 0 to 25 mm
1
1
46 Micrometer 0‐2.5 cm out side
47 Micrometer 50‐75 mm outside
48 Micrometer depth gauge 0‐200 mm
49 Micrometer inside 2" to 8" cap/5 cm to 20 cm
2
1
2
2
2
5
1
1
2
2
Foundryman
LACP
AOCP
TURNER
MACHINIST
ELECTRICIAN
ITEM Name
FITER
Sl. No.
Total Qnty
50 Micrometer inside 50‐200 mm cap
1
1
51 Micrometer Outside 0 to 1"reading 0.001" 6
6
52 Micrometer outside 0‐1"
1
1
53 Micrometer Screw Thread ‐interchangeable anvil for various metric pitches
1
1
54 Micrometer with extension rod (Inside) 50 mm to 150 mm
1
1
55 micromiter inside upto25 to 150mm read reading 0.01mm 2
2
56 Plaing ,Ring and Pluge Gauge 12 to 50 mm.
1
1
57 Planer gauge standard size
1
1
58 Ring gauges 5 mm to 25 mm by 2.5 mm (Go & No Go)
1
1
59 Rule steel 12" English & metric/30cm
34
34
60 Rule steel 300 mm 34
34
61 Rules Wodden 4 fold 60mm
34
34
62 Scale(wood)Draughtsmen 12"/30cm
63 Screw pieth Gauge withwork & metric
Screw thread micrometer with interchangeable 0‐25mm, Pitch anvils for checking metric
64
threads 60.
65 Scriber 150mmx0.4mm(Knurled center position)
34
1
2
1
4
1
1
34
34
67 Scriber 50mm X3mm
13
17
2
70 Slip Gauge metric set ( 87 pieces in a box )
1
71 Square ‐ T 24" blade
2
1
2
34
34
17
17
73 Steel Measuring tape ‐3 meter 74 Steel rule 12 inch
4
13
17
69 Scribing block universal 300 mm
72 Square try 10 cm blade
68
4
66 Scriber 50mm X3mm
68 Scriber15 cm
34
2
6
2
6
75 Steel Rule 150mm to read metric
17
76 Steel rule 30 cm graduated both in English & metric units
4
12
77 Steel rule 60 cm graduated both in English and metric units
4
2
12
Foundryman
34
62
2
8
1
2
80 Surface pate 60 X60mm
2
1
1
81 Surface plate 12"x 12"/30cm x30cm
2
2
1
82 Surface plate 400mm x 400 mm grade I
Total Qnty
30
1
79 Surface gauge 250mm arm
1
1
1
84 Swage block 14" x 14" 5" with stand
1
85 Try square (for wood work)
1
4
86 Try Square 150 blade
87 Try square 300 mm
LACP
13
78 Steel tape 2 metre in case
83 Surface roughness comparison plates 400 x 400mm
AOCP
TURNER
MACHINIST
ELECTRICIAN
ITEM Name
FITER
Sl. No.
2
2
2
2
88 Venire caliper 12"
4
4
1
1
89 Venire caliper 20 cm
1
1
90 Venire height gauge 30 cm
1
1
91 Vernier Bevel Protractor 150mm blade 1
92 Vernier caliper 0‐ 130 mm L.C.O 0.02 mm.
1
1
2
4
1
93 Vernier caliper outside,inside and Depth 200mm/ 8"with metric s inch scale 1
1
94 Vernier gear tooth caliper
1
1
95 Vernier height gauge 250 mm
1
1
96 Vernier micromiter 0 to25mm outside 1
1
97 Vernier micromiter 0" to 1"outside reading 0.0001"
1
1
98 Vernier micromiter 25 to 50mm outside reading 0.001mm
1
1
2
99 Wing compass 10" or 12"/25 cm to 30 cm
100 Wing compass 25.4 cm or 30 cm
2
2
2
101 Wire gauge Imperial standard
104 Wire stripper 20cm
Foundryman
LACP
AOCP
TURNER
1
102 Wire gauge without Asbestos
103 Wire gauge, metric standard
MACHINIST
ELECTRICIAN
ITEM Name
FITER
Sl. No.
Total Qnty
1
30
30
1
1
4
TOTAL = 197 146 93 150 244 30
4
100
960
34
2
Fire buckets
5
5
3
Fire Extinguisher and buckets 1
8
4
Fire extinguisher soda ash, etc type Co2 gas type
8
8
5
First aid box based on burn treatment
4
4
6
First aid box based on burn treatment
7
Footware asbestos over shoes
8
Gloves (leather).
9
Goggles (antiglau heat proof)
2
1
1
1
4
LACP
34
AOCP
Apron leather or asbestos
TURNER
1
ITEM Name
ELECTRICIA
N
Total Quantity
Sl. No.
FITER
Foundryma
n
MACHINIST
LIST OF SAFETY EQUIPMENTS FOR EXISTING & NEW TRADES
ITI, Rourkela (Package No.9)
1
3
1
1
34
36
34
34
10 Guantlets leather fetting
8
8
11 Guantlets leather or asbestos for furnace
8
8
12 Hand bellows ‐ 25 cm
34
34
13 Hand lamp wandering lead
2
2
14 Helmet (engineers)
8
8
2
15 leather apron XXL
2
16 Oxy‐ acetylene gas welding set equipment with hoses, regulator and other accessories.
1
17 safety goggle clear glass(Good quality)
17 12 13
18 Welder cable to carry 400 amps with flexible rubber cover.
50
50
19 Welding goggles.
4
4
20 Welding helmet with colored glass.
2
2
21 Welding torch tips of different size.
1
1
22 Welding torches 5 to 10 nozzles.
1
1
TOTAL 83 14 18
2
4
1
34
0
36
34
0 215
110
366
2
Foundryman
AOCP
1
LACP
TURNER
1 Steel Almirah 1800x1500x450 mm made out of 1mm 3 adjustable selves, Enamel color finish Arc welding table (all metal top) 1220x920x600 mm LXWXH top with 5mm msc sheet, legs 37x37x2mm tubes 2
1
with leg binders with Enamel.
3 Board drawing 1250 mm x 900 mm
Computer Chair (940x700x450 mm) AB/Back Ht. Adjusted‐Manual with moulded cusion, Base is made up of 4
Steel with Wheel for movement
Computer Table (32"x22"x30" WDM) with provision of housing Key Board, CPU, Printer, UPS etc. Leg made 5
out of 25x25x18G Square Tube & 18 mm pre‐laminated board.
6 Cylinder trolly suitable to Co2 cylinder and Indane Gas Cylinder
7 Furniture of Muldimedia studio
8 Green board With eraser 180*150cm
9 Glazed board 2.4 x 1.2 metres with felt cloth and marking pen sets (blue,black , red & green)
10 Instructor Chair 18" arm type
1
Lockers for 16 Trainees with locking facilities (standard size) 78"x36"x18" (H X W X D) made out of 20 SWG 11
CR sheet paint Enamel color legs will be 100 mm extra.
12 Marking table 1200 x 1200x 900mm high
13 Marking table 91 x 91 x 122cm
Metal rack 1800x1500x450mm three shape made up 1mm CR sheet having 16g slotted adujstable angle 14
enamle paint.
15 Table for surface plate 900 x 900 x 1200 mm with top 1" sal wood 16 Table welding 4' x 2 1/2' fire brick top on stand
17 Tool boxes of drawers fitted in the working bench
Working Bench 8'x4'x2.5' (L x B x H) with top frame made up MS angle size 35x35x5 mm binded with 6 nos. of 18
leg with MS Channel 50x50x5 mm top wooden plank of sal wood 36mm thick
MACHINIST
Name of the Item
Instrument Mech
Sl. No.
ELECTRICIAN
LIST OF FURNITURE FOR EXISTING & NEW TRADES
ITI, Rourkela (Package No.10)
Total Qnty.
3
1
34
34
2
2
2
2
1
1
1
4
2
1
2
1
2
1
1
2
1
2
2
1
2
1
1
2
1
1
1
0
6
2
2
1
4
4
10
20 Working bench 6"*2 1/2 with 2 vices 5"jaws
TOTAL 3
2
8
4
3
49
Total Qnty.
1
3
4 10
3
80
LACP
AOCP
TURNER
1
Foundryman
Steel Chair arm type made out of steel square tube, consisting of seat and back, plastic woven seasoned Non Teak, Non Sal hard wood such as Dharua, Asan, Kangra & Tentra frame & hand rest made out of the same wood.
Specification : 1. Frame : 25x25x1.25mm square steel tube ; 2. Seat size 450x450mm, made out of seasoned 19
1
Non Teak, Non Sal, hard wood such as Dharua, Asan, Kangra & Tentra frame with plastic woven canes. ; 3. Seat height ‐ From the ground level 450mm ; 4. Hand rest ‐ Made from Non Teak, Non Sal hard wood such as Dharua, Asan, Kangra, Chakunda, Kasi & Tentra. Height of Top of seat to top of hans rest 235mm ; 5. Back‐ Inclined back wards 5" to 10" from the vertical height having size of 450x250mm
MACHINIST
Instrument Mech
Name of the Item
ELECTRICIAN
Sl. No.