TEXTILE & NON-WOVEN FINISHING MACHINERY
C
with Exclusive Patented
Beta-Roll®
CALENDERS’ RANGE:
_ 2-roll
_ 3-roll
_ 3-roll differentiated
CALENDERS’ FEATURES:
Since 1959
Designed and Made in Italy
Beta Machinery srl
Vicolo Custodi 2
21052 - Busto Arsizio - VA
ITALY
[email protected]
C
_ No roll deflection under any working pressure
_ High squeezing efficiency (300 N/mm)
More than
_ High squeezing load (up to 90 tons)
2,000
machines
_ Rolls’ width up to 6,000 mm
in operation
_ Oil-heated rolls up to 250° C
_ Temperature deviation on the roll table ± 1C°
_ Steel and nylon-coated rolls, engraved rolls
_ Thermobonding machines
_ Low operating costs
_ Great accessibility for maintenance,
roll disassembly, cleaning and fabric threading
ALENDERS
ALENDERS
www.betaspa.com
TEXTILE & NON-WOVEN FINISHING MACHINERY
C
ALENDERS
2-roll Calender
Calender Type
Steel rolls diameter
Nylon rolls diameter
Rolls width
Max working pressure
CM / DCM
CP / DCP
CPS / DCPS
430mm
530mm
1500mm / 3200mm
40.000 kg
500mm
600mm
1800mm / 3600mm
60.000 kg
600mm
700mm
2600mm / 4000mm*
90.000 kg
* On request working widths over 4000mm are available
Technical Features
Rolls
Available calender versions
Differentiated calender version
Working pressure
Inlet
Optional devices
Outlet
Control switchboard
Drive system
Transmission
Safety
Beta Machinery srl
Vicolo Custodi 2
21052 - Busto Arsizio - VA
ITALY
- Beta-Roll® patent for calenders
- Absolute uniformity of pressure and temperature (±1°C on
roll width)
- Parallel grinding
- Hardened, chromium-plated and ground steel
- Nylon sleeves
- On request cotton and paper-wool coatings
- Engraved rolls
- Heating by diathermic oil
- For woven fabrics
- For non-woven fabrics
- Version with 2 rolls and 3 rolls
- Various layouts of rolls in steel, nylon or other
Each nip has its own working pressure, independently from the
other nip. It is useful to be able to work with two different
surfaces in contact (steel/steel or steel/nylon). It is possible to
work with one nip only too.
- Up to 90ton according to width
- Max 300 kg/cm
High pressure compressed air (20bar max) is used; machine is
provided with its proper air compressor.
- Normal stretcher
- From big and small rolls
- From folder with widening and centering device
- Versions for all kinds of fabrics
- Heat exchanger for diathermic oil (oil/oil or steam/oil)
- Diathermic oil heater (electric or with gas)
- Air cooling for rolls
- Metal detector
- Seam detector
- Antistatic device
- Fabric humidifier
- Tangential winder (constant tension with load cells)
- Axial winder (constant tension with torque control)
- Folder device
- Relays logic
- PLC
AC motor with inverter
V-belts (for noiseless running)
Safety guards with sliding doors and door locking (cat. 4)
[email protected]
3-roll Calender
Differentiated
3-roll Calender
Thermobonding
Calender
www.betaspa.com