Manual and AirActivated Chopsaws
aterial Flow
Direction of M
26” Air-Activated Chopsaw, Left Hand Model,
with Optional Infeed and Outfeed Roll Cases
Overview
B
aker Chop Saws give
you fast production,
high-quality, heavy-duty
design, at an economical price.
Chopping action applies blade
force down and back to rail
where material is properly held
during cutting action.
These saws come complete
and ready to run. Saw-mounted
starters and disconnects mean
that all you have to do is run
electricity to it. It’s equipped to
accept a 4 in. (102 mm) dust pipe.
The Baker Chop Saw comes
in either fully manual (handleoperated) or air-activated (foot
pedal-operated) versions. It
comes with either 20 in. (508
mm), 26 in. (610 mm), or 36 in.
(914 mm) diameter saws. A 10 ft
infeed rollcase and a 5 ft. outfeed
rollcase are nice options to have.
Features
• Air-activated or manual operated
• Right & Left hand models
available
• 10- to 20-hp (depending on
model) TEFC electric motors
• Manual or air stops available
to match
• Easy to setup, operate, and
maintain
• Many options available
• Can be used in any cut-tolength operation
• Heavy-duty tube steel construction
• Powered and non-powered
infeed and outfeed rollers
available
• Electrical panel—prewired
with starter, disconnect, overload protection, and start/
stop control station
• Wire mesh cage with arm
extensions standard
PO Box 128
Ellington, Missouri 63638 USA
Website: www.logtolumber.com
E-mail: [email protected]
Fax: (573) 663-2787
Phone: (573) 663-7711
Manual and AirActivated Chopsaws
20” Air
20” Manual
26” Air
36” Air
Specifications
Dimensions:
Height:
Width:
Length:
Weight:
69 in. (175 cm)
25 in. (64 cm)
48 in. (122 cm)
Approx. 800 lbs. (318 kg)
69 in. (175 cm)
25 in. (64 cm)
48 in. (122 cm)
Approx. 800 lbs. (318 kg)
69 in. (175 cm)
25 in. (64 cm)
48 in. (122 cm)
Approx. 900 lbs. (408 kg)
88 in. (224 cm)
40 in. (102 cm)
72 in. (183 cm)
Approx. 1,500 lbs. (680 kg)
20 in. (50.8 cm) diameter,
60 teeth
20 in. (50.8 cm) diameter,
60 teeth
26 in. (66 cm) diameter,
60 teeth
36 in. (91.4 cm) diameter,
60 teeth
N/A
Handle
One 4 in. (102 mm) diameter
(600 CFM recommended)
100 PSI
Foot pedal
One 4 in. (102 mm) diameter
(600 CFM recommended)
100 PSI
Foot pedal
One 4 in. (102 mm) diameter
(600 CFM recommended)
100 PSI
Foot pedal
One 4 in. (102 mm) diameter
(600 CFM recommended)
All voltages available
10 HP (7.5 kw) TEFC
All voltages available
15 HP (11 kw) TEFC
All voltages available
20 HP (15 kw) TEFC
All voltages available
Cutting Capacity
Dimensions to Choose
From:
Note: Not all sizes are
available on one model.
Customer must specify
maximum size of cut.
5 x 7 in. (127 x 178 mm)
6 x 6 in. (152 x 152 mm)
4 x 8 in. (102 x 203 mm)
2 x 10 in. (51 x 254 mm)
5 x 7 in. (127 x 178 mm)
6 x 6 in. (152 x 152 mm)
4 x 8 in. (102 x 203 mm)
2 x 10 in. (21 x 254 mm)
7 x 9 in. (178 x 229 mm)
8 x 8 in. (203 x 203 mm)
6 x 10 in. (152 x 254 mm)
4 x 12 in. (305 x 305 mm)
12 x 12 in. (305 x 305 mm)
Options
Waste removal conveyor
Waste removal conveyor
Waste removal conveyor
Waste removal conveyor
Dead rollers in 5 ft. increments
Dead rollers in 5 ft. increments
Dead rollers in 5 ft. increments
Dead rollers in 5 ft. increments
Live rollers in 1 ft. increments
Live rollers in 1 ft. increments
Live rollers in 1 ft. increments
Live rollers in 1 ft. increments
Manual stops
Manual stops
Manual stops
Manual stops
Air stops
Air stops
Air stops
Air stops
Unscrambler
Unscrambler
Unscrambler
Unscrambler
Dust pipes and blowers
Dust pipes and blowers
Dust pipes and blowers
Dust pipes and blowers
Remote control station
Remote control station
Remote control station
Remote control station
Blades:
Operating Air Pressure:
Controls:
Dust Chute Opening:
Power
Engine: 10 HP (7.5 kw) TEFC
Capacities
Product specifications are subject to change without notice
PO Box 128
Ellington, Missouri 63638 USA
Website: www.baker-online.com
E-mail: [email protected]
Fax: (573) 663-2787
Phone: (573) 663-7711
031810