Metal Filler Breathers SMBB / SMBT / SMBP
Area of Application:
Reservoir Breathers and Tank Filling
Available Versions:
Screw-in, bayonet and push-on style
Materials:
• Breather cap: steel, chrome-plated or epoxy – coated.
• Bayonet Flange: steel, chrome-plated
• Air filter insert: 3µ, 10µ or 40µ in group size 80 10µ or 40µ in group size 47
• Basket: steel, zinc-plated
• Seals: Cork - Group 47 or 80 standard breathers Buna-N - Group 80 pressurized breathers
Options:
• Baskets – Additional 150 mm (6"), 200 mm (8") steel mesh and 100 mm (4") plastic baskets available with “Group Size 80”
• Thread style –
NPT standard, BSP available on request
• Pressurized –
0.35 bar (5 PSI) or 0.70 bar (10 PSI) Relief valve settings
• Locking tabs
• Push-on style
• Dipsticks
• Custom versions available on request
Group size 47 – Breather cap diameter 47 mm
Options:
• Metal basket
Mounting Detail
ø29 (ø1.14")
BCD=ø41 (ø1.61")
SMBB-47
Metal Filler Breather
Bayonet style
Seal material: cork
SMBT-47
Metal Breather
Screw-in style
3x 4.5mm (0.170") THRU
FOR #10-32UNF
SELF TAPPING SCREW
Options:
•NPT-thread standard (1/4" NPT, 3/8" NPT)
BSP optional. Other threading – consult factory
ø47 (ø1.85")
42 (1.65")
3x #10-32UNF x
12.7 (0.5")
SDF TAPPING
SCREW
65 (2.56")
14 (0.55")
SW
G
Type
SMBT-47
N04
N06
G
1/4" NPT 3/8" NPT
SW17 (0.7")24 (0.95")
ø28 (ø1.10")
BCD=ø41 (ø1.61")
Part No.
Micron Rating
Air Flow Capacity
Oil Displacement
cfmm3/mingpm
lpm
Screws
SMBB 47/SMBT 4710100.2872
272
10-32x1/2
SMBB 47/SMBT 4740140.490
340
10-32x1/2
Metal Filler breathers SMBB-47 and SMBT-47 are not available in pressurized or lockable versions. For more details, review the ordering
table on page A10.
­A9
ACCESSORIES
45 (1.77")
ø47 (ø1.85")
Metal Filler Breathers SMBB / SMBT / SMBP
Ordering Code (bayonet style, cap ø47mm)
SMBB - 47E - N - 10 - O - C - S065 - O
Type
Dipstick
SMBB Metal Filler Breather
(bayonet style)
O
without dipstick (standard)
Baskets
Cap Size
O
S065
47 ø47, steel cap, chrome-plated (standard)
47E ø47, steel cap, black epoxy
without baskets
65 mm metal basket (standard)
Seal Material
Note: other versions available upon request
Version
Ccork
Pressurization (Opening Pressure)
S with STAUFF-logo (standard)
N neutral (without logo)
O
without pressurization (standard)
Note: No pressurization available for this cap diameter.
Filter Material and Micron Rating
00
10
40
Note: Screws are supplied with the SMBB as standard
without filter insert
10 µm foam (PUR)
40 µm foam (PUR)
Ordering Code (screw-in style, cap ø47)
SMBT - 47E - N - 10 - O - N06 - O
Type
Dipstick
SMBT Metal Filler Breather
(screw-in style)
O
without dipstick (standard)
ACCESSORIES
Connection Thread
Cap Size
N04
N06
47 ø47, steel cap, chrome-plated (standard)
47E ø47, steel cap, black epoxy
/4
/8
1
1
3
3
/4 NPT
/8 NPT
Note: Other connection threads and sizes
vailable
a
Note: other versions available upon request
Version
S with STAUFF-logo (standard)
N neutral (without logo)
Pressurization (Opening Pressure)
O
00
10
40
without pressurization (standard)
Note: No pressurization available for this cap diameter.
Filter Material and Micron Rating
without filter insert
10 µm foam (PUR, standard)
40 µm foam (PUR)
­A10
Metal Filler Breathers SMBB / SMBT / SMBP
Group size 80 – Breather cap diameter 80 mm
SMBT-80
Metal Breather
Screw-in style
SMBP-80
Metal Breather, epoxy coated standard
Push-on style
Options:
• Metal Dipstick – non-pressurized
• Plastic Dipstick – pressurized
• Locking version
• Pressurized, opening pressure
0.35 bar (5 PSI) and 0.7 bar (10 PSI)
• Seal material: cork – non-pressurized
Buna-N – pressurized
• 150 mm (6") and 200 mm (8") metal and 100 mm (4") plastic baskets available
• 3µ, 10µ or 40 micron breather element
• Chrome plated or epoxy coated
• Extended Bayonet options available
Options:
• Metal Dipstick non-pressurized
• Plastic Dipstick – pressurized
• NPT thread standard, BSP available
on request
• Pressurized, opening
pressure 0.35 bar (5 PSI) or 0.7 bar
(10 PSI)
• 3µ, 10µ or 40 micron breather element
• Chrome plated or epoxy coated
Options:
• Plastic Dipstick
ø81 (ø3.19")
H1
ø49 (ø1.93")
N08 N12 ø81 (ø3.19")
N16
G1/2" NPT 3/4" NPT 1" NPT
H114 16 19
SW24 30 36
ø52 (ø2.05")
Non-pressurized version
52.5 (2.07")
ø80 (ø3.15")
")
.5
Part No.
(ø0
ø6
Pressurized version
H1
Standard Bayonet - “B”
SW
Part No. EBF-1 - “B1”
38 mm (1.5 in) high
(See A13 for details)
G
Type
SMBT-80 .26
56 (2.20")
6x #10-32UNF
x 12.7 (0.5") LG
SDF TAPPING
SCREWS
BCD=ø73 (ø2.87")
Bayonet Flange Options
ø81 (ø3.19")
6x 4.3mm (0.170")
THRU FOR
#10-32UNF
SELF TAPPING
SCREW
ø49 (ø1.93")
The SMBP is only available without
pressurization
ACCESSORIES
BCD=ø73 (ø2.87")
ø38 (ø1.50")
Type
SMBT-80 BCD=ø73 (ø2.87")
Non-pressurized version
80/150/200 (3.15"/5.91"/7.87")
SW
G
ø6
.5
(ø0
.26
")
80/150/200 (3.15"/5.91"/7.87")
53 (2.09")
6x #10-32UNF
x 12.7 (0.5") LG
SDF TAPPING
SCREWS
42 (1.65")
ø80 (ø3.15")
6x 4.3mm (0.170")
THRU FOR
#10-32UNF
SELF TAPPING
SCREW
52.5 (2.07")
ø52 (ø2.05")
BCD=ø73 (ø2.87")
SMBB-80
Metal Filler Breather
Bayonet style, 3" metal basket standard
N08 N12 N16
G1/2" NPT 3/4" NPT 1" NPT
H114 16 19
SW24 30 36
Part No. EBF-2 - “B2”
69 mm (2.7 in) high
(See A13 for details)
Pressurized version
Micron Rating
Air Flow Capacity
Oil Displacement
cfmm3/min gpmlpm
Screws
SMBB/SMBT 803 100.28 72
272
10-32x1/2
SMBB/SMBT 8010 160.45110
416
10-32x1/2
SMBB/SMBT 8040 260.75190
720
10-32x1/2
­A11
Metal Filler Breathers SMBB / SMBT / SMBP
Ordering Code (bayonet style, cap ø80)
SMBB - 80E - N - L - 10 - 05 - B - S080 - O
Dipstick
Type
O
without dipstick (standard)
D300 plastic dipstick 300 mm
SMBB Metal Filler Breather
(bayonet style)
Note: The plastic dipstick can be shortened
by the customer to requested lengths.
Cap Size
80 ø80, steel cap, chrome-plated (standard)
80E ø80, steel cap, black epoxy
Baskets
O
S080
P100
S150
S200
Note: other versions on request
Version
S with STAUFF-logo (standard)
N neutral (without logo)
Seal Material
Locking Option
C cork (for non-pressurized version)
B NBR (for pressurized version)
O not lockable (standard)
Llockable
Pressurization (Opening Pressure)
Filter Material and Micron Rating
00
03
10
40
without baskets
80 mm metal basket (standard)
100 mm plastic basket
150 mm metal basket
200 mm metal basket
O
05
10
without filter insert
3 µm filter paper
10 µm foam (PUR, standard)
40 µm foam (PUR)
without pressurization (standard)
0,35 bar (5 PSI)
0,70 bar (10 PSI)
Note: Screws are supplied with the SMBB as standard
Ordering Code (screw-in style, cap ø80)
SMBT - 80E - N - 10 - 05 - N12 - O
Type
Dipstick
SMBT Metal Filler Breather
(screw-in style)
O
without dipstick (standard)
D300 plastic dipstick 300 mm
Note: The plastic dipstick can be shortened
by the customer to requested lengths.
Cap Size
80 ø80, steel cap, chrome-plated (standard)
80E ø80, steel cap, black epoxy
Connection Thread
N08 1/2 NPT N12 3/4 NPT N16 1 NPT B08G 1/2 BSP
B12G 3/4 BSP
B16 G 1 BSP
Note: other versions on request
Version
ACCESSORIES
S with STAUFF-logo (standard)
N neutral (without logo)
Filter Material and Micron Rating
00
03
10
40
upon
upon
upon
upon
request
request
request
request
Pressurization (Opening Pressure)
without filter insert
3 µm filter paper
10 µm foam (PUR, standard)
40 µm foam (PUR)
O
05
10
without pressurization (standard)
0,35 bar (5 PSI)
0,70 bar (10 PSI)
Ordering Code (push-on style, cap ø80)
SMBP - 80E - N - 10 - D300
Type
Dipstick
SMBP Metal Filler Breather
(push-on style)
O
without dipstick (standard)
D300 plastic dipstick 300 mm
Cap Size
Note: The plastic dipstick can be shortened
by the customer to requested lengths.
80 ø80, steel cap, chrome-plated
80E ø80, steel cap, black epoxy (standard)
Filter Material and Micron Rating
00
10
40
Note: other versions on request
Version
S with STAUFF-logo (standard)
N neutral (without logo)
­A12
without filter insert
10 µm foam (PUR, standard)
40 µm foam (PUR)