G I AT E C
SCIENTIFIC
Giatec SmartRock2™
Wireless Temperature and
Strength Sensor for Concrete
Giatec SmartRock2™ is a rugged mobile-based wireless sensor for monitoring the temperature of concrete
from fresh to hardened stage. It also estimates concrete strength based on the maturity concept. SmartRock2™
can be placed in the concrete formwork (installed on the rebar) before pouring to monitor the temperature of
concrete in situ. The continuous measurements are recorded on the SmartRock2™ memory and can be
downloaded any time during the concrete setting and hardening onsite using the Android and iOS mobile apps
on a smartphone or tablet device.
APPLICATIONS
SmartRock2™ can be used to monitor the
temperature and strength of concrete.
This information can be used for:
● Optimization of curing conditions
● Quality control in the field
● Estimation of strength (ASTM C1074)
● Formwork removal timing
● Post-tensioning
● Opening road to traffic
● Monitoring temperature gradients in mass concrete
HOW TO USE SMARTROCK2™ IN 3 EASY STEPS
1 Install Sensor1
2 Pour Concrete
3 Read Sensor
Sensors should be installed
within 5cm (2 inches) below
the surface of concrete
1
FEATURES
TECHNICAL SPECIFICATIONS
Hardware
-30 to 80 °C
Reading Range
● Wireless Technology
● Rugged and waterproof design
● Easy installation and activation
by tying the wires together
● Extended temperature sensor cable for mass concrete
● Long battery life (up to 3-4 months after installation)
● Patents pending
(-22 to +176 °F)
Accuracy
± 1°C
Measurement
Frequency
Once every 30mins
for 1 month
Wireless Signal Range1
Up to 6-8 meters
(20-26 feet)
Dimensions
38 x 38 x 12 mm
(1.5 x 1.5 x 0.5 inches)
Temperature Cable
Length
40cm (16 inches)
3m (10 feet)
Battery Life
Up to 4 months after
installation
Software
V 17-SR-02
● Real-time data display
(e.g. temperature, strength, max-min)
● Maturity calibration database
● Free Android and iOS apps for smartphone and tablet
● Easy data sharing between devices
● Project management tools
● PDF report generation
● Photos and blueprints attachment
● Goal limit setting for temperature and strength
G I AT E C
SCIENTIFIC
Giatec Scientific Inc.
245 Menten Place, Suite 300
Ottawa, ON, Canada, K2H 9E8
www.giatec.ca, [email protected]
Tel. (613)240-7451 Fax (613)280-1544