DETAILS OF SUPPLY AND INSTALLATION OF GLASS ELEVATOR 1. 2. 3. 4. Scope of Work Supply and installation of Glass Elevator Location Ground Floor of Sribriddhi Bhavan Distance of Travel – From Ground floor to Basement Completion Period - 2 months from the date of work order. DETAIL TECHNICAL SPECIFICATION FOR LIFTS a) Indoor Travel height-3500mm b) Pit depth :100 mm c)head room – 1000mmto 2700 mm d)Lifting capacity -300kg e) Motor- 2.2KW f) Machine Type- Oil Hydraulic g)Speed -15to25 cm/sec h) Power supply -1-phase,230 volt,10 a,50 HZ I) Soft start and stop j) stops- 2 stops k) Landing Doors : Opening 900x2000mm ( inline side) l) Panoramic Frames painted in RAL colour li) Operation-: Manual Swing Type lii) Cabin : Controls Push and Run for the landing Doors, Hold to Run for the inner controls, Push button panel with emergency lights, handleand display standard telephone emergency Lowering on cabin liii) cabin size : (1250 mm-1300mm)X 1100mm-1400mm) x(2100mm-2200mm) liv) Cabin Walls :-Finished in skin plate choice of 5 standard avilable colours 2 walls in full height transparent glass central stave and trap door instainless steel like skin plate lv) Ceiling- False ceiling with 2 LEDS spot lvi) Floor- Rubber choice of 2 standard colour photo cell on cabin access lvii) cabin door- Automatic folding doors painted in RAL colour lviii) shaft- Construction Galvanized , Galvag cold folded ( painted with customize epoxidous powder color RAL lix) In door shaft cover shaft size outside measurement (1450mm-1500mm)X( 1500mm1600mm) lx) Shaft fillling (4sides) between horoizontal bars : Transparent safety glass lxi) controls- emergency stop button on plat form lxii)Outer controls:Push and run buttons in door frame lxiii) Inner controls : Hold to run( can be changed during installation to push to run. lxiv) System box : The oil pump and electrical system need to be covered by box . Accepted/ Not accepted d) COMMERCIAL TERMS AND CONDITIONS OF GLASS ELEVATOR A) The rate should include all duties, Taxes(including VAT),Levies, Transport, Transit insurance, loading and un loading, service tax etc. No increase in above is acceptable to bank. No form C or D will be provided by bank. B) No advance is payable. The other payment terms are, a) 80% against delivery of materials b) 10% against installation c) 10% after approval by lift Inspector and handing over C) Defect liability period : The Glass elevator shall warranty shall be period of 12 months from the date of delivery. D) Liquidated damage : 0.5% per week for a maximum of 5% contract value for non completion within the agreed date. E) Site Visit: The vendors are advised to visit site and acquaint themselves regarding site conditions. F) Arbitration Clause- The vendor is required to accept Bank's Standard arbitration clause. G) Agreement : The successful tenderer has to submit an agreement on stamp paper at own cost as per our standard format. Date Accepted/ Not accepted Place Applicant' Signature and stamp PRICE FORMAT Sl no description 1 Supply & installation of Glass Elevator including all taxes and duties as per enclosed specification 2 Annual Maintenance Contract per year for 3 years Rate
© Copyright 2026 Paperzz