IDEAL FOR: Diecstings • Heat
Treated Parts • Automotive
Wheels • Ferrous and Non
Ferrous Castings
Rotoblast Wire Mesh Belt
Type ES
VERSATILE BLAST EQUIPMENT
Pangborn Rotoblast Wire Mesh Belt systems provide high volume, cost
effective performance for deburring, cleaning, descaling, deflashing or
etching. These systems are extremely versatile and built to accommodate
medium to large die castings, heat treated parts, automotive wheels,
ferrous and non-ferrous castings, weldments, fabrications and more.
ROTOBLAST WIRE MESH BELT
Type ES
DESCALING
ES-2019-2
ES-1990-5
ES-1848-47
Work Capacity
8” high x 2’0” wide
(203 mm x 609 mm)
5” thick x 4’6” wide
(127 mm x 1371 mm)
5’0” wide x 3’0” high
(152 mm x 914 mm)
Overall Length
20’8” (6.3 m)
20’11” (6.4 m)
30’6” (9.3 m)
Overall Width
7’0” (2.1 m)
12’9” (3.9 m)
18’9” (5.7 m)
Overall Height
17’0” (5.2 m)
18’5” (5.6 m)
with 34.5” (0.88 m) pass line
24’0” (7.3 m)
Pass Line
4’0” (1.22 m)
34.5” (0.88 m)
4’10.5” (1.49 m)
Machine Weight
23,500 lbs (10,700 kg)
29,000 lbs (13,400 kg)
27,500 lbs (21,600 kg)
Entrance Vestibule Length
2’0” (0.61 m)
2’11” (0.89 m)
5’0” (1.5 m)
Blast Compartment Length
9’8” (2.95 m)
4’0” (1.22 m)
7’7” (2.31 m)
Exit Vestibule Length
2’0” (0.61 m)
2’11” (0.89 m)
7’5” (2.26 m)
Wheel Diameter & Drive
(4) 15 hp (11.2 kw)
140DD-2RI
(4) 25 hp (18.6 kw)
130DD-2 RK
(8) 25 hp (18.6 kw)
265DD-2 RI (12 vane)
Abrasive Velocity
267 feet/sec (81.4 m/sec)
290 feet/sec (88.4 m/sec)
262 feet/sec (79.8 m/sec)
Abrasive Flow/Hour
68,750 lbs (31,200 kg)/hr
115,500 (52,500 kg)/hr
233,860 lbs (106,200 kg)/hr
Abrasive Load
4,000 lbs (1,800 kg)
6,000 lbs (2,700 kg)
30,000 lbs (13,600 kg)
Dust Collector Volume
1,6850 cfm (47.6 cu.m/min)
@1.65:1 ratio
2,800 cfm (79.3 cu. m/min)
@1.84:1 ratio
5,660 cfm (160.3 cu.m/min)
@1.85:1 ratio
FOUNDRY
ES-2022
ES-2022-1
ES-1993
Work Capacity
20” wide x 6.5” high
(508 mm x 165 mm)
20” wide x 6.5” high
(508 mm x 165 mm)
40” wide x 24” high
(1016 mm x 609 mm)
Overall Length
33’6” (10.2 m)
33’6” (10.2 m)
28’0” (8.5 m)
Overall Width
12’6” (3.8 m)
12’6” (3.8 m)
11’9” (3.6 m)
Overall Height
21’0” (6.4 m)
floor line installation
21’0” (6.4 m)
floor line installation
21’0” (6.4 m)
floor line installation
Pass Line
5’6.5” (1.69 m)
5’6.5” (1.69 m)
4’8” (1.42 m)
Machine Weight
43,500 lbs (19,700 kg)
40,000 lbs (18,200 kg)
44,500 lbs (20,200 kg)
Entrance Vestibule Length
5’6” (1.68 m)
5’6” (1.68 m)
5’0” (1.5 m)
Blast Compartment Length
9’6” (2.9 m)
9’6” (2.9 m)
5’4.75” (1.65 m)
Exit Vestibule Length
5’6” (1.68 m)
5’6” (1.68 m)
4’11” (1.5 m)
Wheel Diameter & Drive
(4) 30 hp (22.4 kw)
195-4 RI (cantered flared)
(4) 30 hp (22.4 kw)
195-4 RI (cantered flared)
(8) 20 hp (14.9 kw)
150DD-4 RK
Abrasive Velocity
240 feet/sec (73.2 m/sec)
240 feet/sec (73.2 m/sec)
290 feet/sec (88.4 m/sec)
Abrasive Flow/Hour
174,760 lbs (79,300 kg?/hr
174,760 lbs (79,300 kg?/hr
125,400 (56,900 kg)/hr
Abrasive Load
12,000 lbs (5,400 kg)
12,000 lbs (5,400 kg)
24,000 lbs (10,900 kg)
Dust Collector Volume
4,500 cfm (127.4 cu. m/min)
@1.47:1 ratio
4,050 cfm (114.7 cu.m/min)
@1.33:1 ratio
5,800 cfm (164.2 cu.m/min)
@1:43:1 ratio
Wire Mesh Advantages Include:
• Complete coverage without part-on-part impingement
• Superior one-pass, continuous cleaning
• Greater abrasive flow and higher horsepower
• Low maintenance and operating costs
• Faster cleaning cycles
• Less noise
For more information, contact us of visit www.pangborn.com.
Pangborn Corporation
4630 Coates Drive
Fairburn, GA 30213
Toll Free: 800.638.3000
Phone: 404.665.5700
Fax: 404.665.5701
Email: [email protected]
OPTIONS
•
•
•
•
•
Special paint
230/3/60 electricals
50 cycle electricals
Dust collector
Abrasive replenisher