InSTrUcTIonS FOR USE
TV 2.0
Thank you
Thank you for choosing our product as your means to better hearing.
To support your efforts, we have put great care and attention into making sure that your
new TV adapter has the highest quality and is easy to use.
The complete system description is documented online at www.oticonusa.com/
connectline
Here you will also find interactive presentations, “how to” videos and a support section
with frequently asked questions.
We recommend that you read this manual carefully to achieve the maximum benefit of
your new TV adapter, before you start to use it. If you have any questions about the use
of the TV adapter, please contact your Hearing Care Professional.
Manufactured under license from Dolby Laboratories.
Dolby Digital and the double-D symbol are registered trademarks of Dolby Laboratories.
The TV adapter is intended to be used together with the Oticon Streamer or Oticon
Streamer Pro and Oticon wireless hearing instruments.
This enables the hearing instrument user to listen to the TV, by wirelessly sending the TV
sound from the TV adapter through the Streamer direct to the hearing instruments.
INSTALLATION GUIDE
Indications for Use
Important Notice
Please familiarise yourself with the entire content of this booklet before using your TV
adapter. It contains instructions and important information about the use and handling
of your TV adapter.
Turn on the TV sound
Turn off the TV sound
SelectMe, using more than one TV adapter Technical information
34
34
36
38
USER GUIDE
Package content
7
TV adapter overview
8
Warnings10
Installation13
Placing the TV adapter
14
Connecting the TV adapter to a power outlet
16
Connecting the TV adapter to the TV
18
Connecting using TOSLINK
20
Connecting using RCA
22
Connecting using mini jack adapter
24
Connecting using SCART
26
Pairing the Streamer to the TV adapter
28
INSTALLATION
Contents
INSTALLATION GUIDE
package content
The TV adaptor box consists of the following elements:
TV adapter
InstructIons for use
Power supply
TOSLINK
RCA cable
tV 2.0
SCART adapter
This guide (Installation guide and Instructions for use)
7
Mini jack adapter
TV adapter overview
Mode
Power indicator
Power on, no connection to the Streamer
In pairing mode
Streaming - no audio input detected
RCA inserted and streaming
TOSLINK inserted and streaming (digital)
TOSLINK inserted and streaming (invalid signal)*
Fault condition **
No light
Blinking
Steady
*Try other input connection
** Contact your Hearing Care Professional
8
TV indicator
INSTALLATION GUIDE
Front
Power indicator
TV indicator
Back
POWER
SelectMe
L
R
IN
OUT
Power supply
TOSLINK out
TOSLINK in
RCA left and right
*For more information please refer to: www.oticonusa.com/connectline
9
Warnings
You should familiarize yourself fully with the following general warnings and the entire
contents of this booklet before using your TV adapter.
Products to be connected to external equipment
• The safety of the use of the TV with RCA input cable is determined by external
signal source. When the input cable is connected to mains-operated equipment, this
equipment must comply with IEC-60065, IEC-60601 or equivalent safety standards.
• The TV adapter is designed to comply with the most stringent Standards of
International Electromagnetic Compatibility. However, the TV adapter might cause
interference with other medical devices. Please contact relevant personnel to obtain
permission before using the TV adapter in hospitals or similar venues.
10
• The TV adapter is not a toy and therefore should be kept out of the reach of children
and anyone else who might swallow parts or otherwise cause injury to themselves.
Special attention should be paid to the smaller components in order to prevent children
from swallowing them and choking.
If a part is swallowed, see a doctor immediately.
The TV adapter must never be washed or immersed in water or other liquids.
11
INSTALLATION GUIDE
Warnings
Activating the TV adapter for the first time
Before you can use the Streamer and your hearing aids with your TV, the TV adapter must
be connected to a power outlet, connected to the TV and paired with your Streamer.
This is a step-by-step guide on how to install the TV adapter.
All needed parts for the installation are included in the package.
13
INSTALLATION GUIDE
Installation
Placing the TV adapter
There are two options of placing the TV adapter:
1. Close to the TV - placed horizontally (A).
2. Behind or close to the TV hanging on the wall (vertically) (screws not included) (B).
A
14
B
15
INSTALLATION GUIDE
Connecting the TV adapter to a power outlet
Start by connecting the TV adapter to a power outlet.
Use the power supply from box 1
1. Plug the power cord into the “power” connector on the TV adapter (A).
2. Plug the power supply into the mains wall socket (B).
3. Check that the power is turned on, after a few seconds the power indicator
green on the front of the TV adapter (C).
16
will light
1
INSTALLATION GUIDE
Box 1
3
C
B
L
POWER
R
IN
A
17
OUT
Connecting the TV adapter to the TV
You can connect the TV adapter to the TV in four different ways.
Connection
Page
TOSLINK. Either digital stereo (PCM) or Dolby® Digital *
20
RCA audio output L+R
22
SCART audio output (L+R)
24
Mini jack audio output (typically headphone output)
26
*Dolby Digital and the double-D symbol are registered trademarks of Dolby Laboratories.
Please refer to the detailed specification of ConnectLine TV 2.0.
(www.oticonusa.com/connectline) and your TV manual/specifications to ensure
compatibility.
Please see the following pages for a solution which fits your TV.
18
TOSLink (p. 20)
RCA (p. 22)
Audio
Out
1
2
L
R
Mini jack (p. 26)
SCART (p. 24)
2
L
R
IN
OUT
*For more information please refer to: www.oticonusa.com/connectline
19
OUT
INSTALLATION GUIDE
2
Connecting using TOSLINK
1. Use the TOSLINK cable from box no. 3 (A).
2. Remove the plastic cap from the TOSLINK cable. (B)
3. Connect the TOSLINK cable to the TOSLINK output on your TV/home theatre
system (C).
4. Connect the TOSLINK cable to the pink TOSLINK input (D) on the TV adapter.
5. The TOSLINK output (E) may be used to connect other TOSLINK devices such as
external Dolby Decoders and surround sound systems etc.
6. Refer to page 28 for pairing of TV adapter with your Streamer.
Please note: It may be necessary to configure your TV, DVD player or home theatre
system so that the correct audio output is available on the TOSLINK output.
For more advanced or complex installations please refer to the support section on
www.oticonusa.com/connectline
20
INSTALLATION GUIDE
C
B
C
Box 3
1
3
A
1
3
2
Box 2
D E
L
R
IN
2
OUT
21
Connecting using RCA
1. Use the RCA cable from box no. 2 (A).
2. Connect the RCA cable to the RCA output on your TV (B) or home theatre system.
(Typically marked “L – R AUDIO OUT” and found on the TV back or bottom panel.)
3. Connect the RCA cable to the RCA connectors (C) on the back of the TV adapter.
4. Refer to page 28 for pairing of Streamer with the TV adapter.
Please note: It may be necessary to configure your TV so that the correct audio output is
available on the RCA output.
For more advanced or complex installations please refer to the support section on
www.oticonusa.com/connectline
22
1
2
Audio
Out
L
R
Box 2
1
2
A
Audio
Out
L
R
L
R
IN
C
OUT
L
R
IN
OUT
23
B
INSTALLATION GUIDE
B
Connecting using mini jack adapter
1. Use the mini jack adapter from box no. 2 (A).
2. Connect the RCA cable to the mini jack adapter (B1).
3. Connect the mini jack to the TV, this is typically the headphone output (B2).
4. Connect the RCA connectors to the TV adapter RCA input (C).
5. Refer to page 28 for pairing of the TV adapter with Streamer.
Please note: The TV speakers may be muted when connecting to the headphone output,
and sound only heard through the Streamer/TV adapter.
For more advanced or complex installations please refer to the support section on
www.oticonusa.com/connectline
24
Box 2
1
2
A
B1
B2
C
L
R
L
IN
R
IN
OUT
OUT
TV cord
25
INSTALLATION GUIDE
B
Connecting using SCART
1. Use the SCART adapter from box no. 2 (A).
2. Connect the RCA cable to the red and white terminals on the SCART adapter (B).
3. Connect the SCART adapter to the SCART output on your TV (C).
4. Connect the RCA connectors to the TV adapter RCA input (D).
5. Refer to page 28 for pairing of TV adapter with Streamer.
Please note: The audio output on the SCART connector can be dependent on the source
selected on the TV. For example some TV’s will only make TV sound available on the
SCART output (i.e. not e.g. sound from a connected DVD player).
For more advanced or complex installations please refer to the support section on
www.oticonusa.com/connectline
26
2
B
Box 2
1
2
A
C
D
L
R
IN
OUT
L
R
IN
OUT
27
INSTALLATION GUIDE
1
Pairing the Streamer to the TV adapter
Before using your Streamer for TV listening, it must be paired to the TV adapter.
For pairing:
1. Make sure the TV adapter is powered on, i.e. the power indicator is steady green.
2. Press and hold the on/off button on the Streamer Pro (B) for 5-6 seconds (A) until the
blue light starts blinking.
(If you have a first generation Streamer 1.4, press the Bluetooth button on the front of
Streamer 1.4 for approximately seven seconds to enter pairing mode. See page 29 for
diagrams of the two versions of Streamer.)
3. Place the Streamer on top of, or close to, the TV adapter – the pairing takes around
20–60 seconds. The TV adapter will automatically begin pairing.
4. The pairing is completed when the power indicator on the TV adapter and the on/off
button on the Streamer briefly turns steady blue, followed by orange status.
5. Pairing is done only once and will normally not have to be repeated.
28
B
Pairing
Streamer 1.4
A
29
INSTALLATION GUIDE
B
Pairing
Streamer Pro
top status
Streamer Pro
front
TV
adapter
Description
Streamer and TV adapter on
Streamer in pairing mode
Pairing complete
Streaming - no audio input detected
RCA inserted and streaming
TOSLINK inserted and streaming (digital)
Steady
Blinking
30
INSTALLATION GUIDE
Volume control
Use the volume button on the Streamer to adjust the TV volume level in the hearing
instruments. Adjust the volume by pressing up or down briefly. Repeat the brief press for
further adjustments.
MUTE
While watching TV it is possible to switch off the microphones in your hearing
instruments, so that only the sound from the TV is heard.
Press both the up and down volume buttons until the surrounding sound is muted. You
will hear a confirmation beep indicating that the microphones in the hearing instruments
are now muted.
Notice: The TV volume in the hearing instruments is normally not affected by the volume
adjustments from the TV remote control.
32
Volume up
Streamer Pro
Streamer Pro
33
USER GUIDE
Mute
Volume down
Start TV listening
Make sure to wear the Streamer around your neck using the
neck loop, and make sure the Streamer is powered on.
Turn on the TV sound
Briefly press the TV button on the front of the Streamer. The
Streamer connects to the TV adapter. After a few seconds
a steady orange light is shown on the Streamer and the TV
adapter. You will hear a confirmation beep in your hearing
instruments followed by the sound from the connected TV.
Turn off the TV sound
Briefly press the TV button on the front of the Streamer. The
orange lights turn off on both the Streamer and the TV adapter.
You will hear a confirmation beep in your hearing instruments.
34
Streamer 1.4
Pairing
Streamer Pro
front
TV
adapter
Description
Streamer and TV adapter on
Streaming - no audio input detected
RCA inserted and streaming
TOSLINK inserted and streaming (digital)
USER GUIDE
Streamer Pro
top status
35
SelectMe, using more than one TV adapter
With Streamer Pro 1.1 and later you can use multiple TV adapters. E.g. one in the living room
and one in the bedroom.
To switch between TV adapters:
1. Make sure you are not connected to any TV adapter i.e. the Streamer should be turned
on, but not active.
2. Briefly press the SelectMe button on the TV adapter you wish to hear the sound from (A).
3. The TV adapter is automatically connected. You will hear a confirmation beep in your
hearing instruments followed by the sound from the connected TV.
36
L
A
R
POWER
IN
L
OUT
R
IN
OUT
USER GUIDE
POWER
37
Technical information
The TV Adaptor contains a 2.4 GHz Transmitter. The emission power from the TV adapter
is max. XX dBμV/m @ X meters and is well below international emission limits for Human
Exposure.
This instrument contains a module with:
FCC ID: XXXXXXXX
IC: XXXXXXXX
The device complies with Part 15 of the FCC rules and RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation.
IC radiation exposure statement: This equipment complies with IC radiation exposure
limits set forth for an uncontrolled environment. End users must follow the specific
operating instructions for satisfying RF exposure compliance.
38
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
39
USER GUIDE
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. To comply with FCC RF exposure
requirements, the device and the antenna for this device must be installed to ensure a
minimum separation distance of 20 cm or more from a person’s body. Other operating
configurations should be avoided.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Relocate the receiving antenna.
• Increase the distance between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the manufacturer or an experienced radio/TV technician for help.
40
Hereby, Oticon A/S declares that this TV adapter is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
Declaration of conformity is available at:
Oticon A/S
Kongebakken 9
DK-2765 Smørum
Denmark
www.oticon.com
xxxx
Waste from electronic
equipment must be
handled according to
local regulations.
?
N4292
41
136280US / 06.13
136280US / 06.13
People First
0000123570000001
People First is our promise
to empower people
to communicate freely,
interact naturally and
participate actively