PHASE CONTROLLED DRIVER
iQ-PH-80-120/24-QD1
WITH BUILT IN RF DIMMER
Q-Tran's iQ-PH phase controlled driver with built in RF dimmer, is perfect for retrofit applications and applications where you
want the ability to dim your LED products, without the need to install a wall box dimmer. The IQ-PH with dimmer, is a driverdimmer combination, designed to be mounted out of site and controlled via remote or smart phone/tablet. (Smart phone and
tablet apps provided by 3rd party)
The iQ-PH is an ideal Constant Voltage electronic
dimmable power supply for interior linear LED applications.
It is capable of providing full-range 0-100% flicker-free
dimming using. Available in 80W at 24VDC and is UL
Listed and Class II Rated.
ORDERING GUIDE
iQ-PH
iQ Series
-
80
Watts
-
120
Prim. V
/ 120
24 -
QD1
Sec. V
-
Dimmer*
*CP
= Caseta Pro (PD-10NXD)
MS = Maestro (MRF2-6ELV-120)
**Others dimmers can be used. Contact Q-Tran for options.
Driver Features
▪ Integral wiring compartments for reduced installation costs
▪ Active Power Factor Correction, PF>0.9
▪ Energy Star Compliant
▪ Built-in protection:
SCP ( Short Circuit Protection ),
OTP ( Over Temperature Protection ),
OVP ( Over Voltage Protection ),
OCP ( Over Current Protection )
▪ Completely potted design, no venting required
▪ Operating temperature Range: -40 to +60°C
(-40 to +140 °F)
▪ Constant Voltage
NOTE: The LED drivers provide a constant voltage output for operating LED systems requiring 24V DC
OUTPUT
MODEL #
100-120VAC
INPUT
iQ-PH-80-120/24-QD1
CHANNEL
OUTPUT
1
VOUT
(VDC)
24
Loading Current (w/
dimmer)per Channel (A)
Loading Current (w/out
dimmer)per Channel (A)
MIN
MAX
MIN
MAX
1.16
3.30
0.17
3.30
MAX
RATED
OUTPUT
OUTPUT
POWER
POWER
PER
CHANNEL
MAX
(W)
79.2
80
2016.V01
PROJECT NAME
DATE
COMPANY
TYPE
NOTE
© 2016, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - [email protected] - www.q-tran.com
1
SPECIFICATIONS
DIMENSIONS & SPECIFICATIONS
1.90"
1.73"
.86"
0.92"
24.2
1.62"
1.62"
Output Voltage (V)
.86"
.86"
0.79"
.86"
OUTPUT VOLTAGE vs. LOAD
TOP VIEW
BOTTOM VIEW
SIDE VIEW
1.90"
.86"
.86"
.86"
.86"
17.36"
3.34"
FRONT VIEW
2.13"
H
Hot
0%
Risk of Electric Shock.
Mount the unit at a height greater than 1 foot from the ground surface. Made In China
WARNING:
Powered By
Tested To Comply
With FCC Standards
iQ-PH-80-120/24
24.05
24
AC INPUT
0
20
40
60
80
100
G
V-
Black
Model: IQ-PH-80-120/24-QD1
Input : 100-120V AC 60Hz 1.1A
Output: 3.33A / 24V DC
Tc
Temp : -40oF ~ 140oF
Factory ID: TS WWYY
N
24.1
Ground
E479456
LED DRIVER
4LZ3
100%
V+
Red
24V DC OUTPUT
3.21"
3.92"
4.47"
4.86"
Neutral
24.15
23.95
Class 2 Power Supply
A.C.Phase Dimmable
1.28"
1.67"
1.73"
% Rated Load (%)
DIMMABLE LED DRIVER
7.72"
8.11"
9.29"
3.81"
5.15"
5.31"
6.34"
Input
▪ Voltage ( RMS )
▪ Frequency ( Hz )
▪ Power Factor
Output
▪ Line Regulation ( % )
▪ Load Regulation ( % )
Min
Nom
Max
100
47
120
50/60
0.9
----
130
63
-10
-------
10
-------------
85
60
----
Environmental
▪ Storage Temperature ( °C )
▪ Operating Temperature ( °C )
▪ Relative Humidity ( % )
▪ MTBF ( Hours @ 25°C ( 77°F ), Full Load )
-40
-40
5
80,000
Protections
▪ Short Circuit Protection ( SCP )
: Hiccup-Mode, Auto-Recovery upon
removal of short
▪ Over Voltage Protection ( OVP )
: 105% of Voltage (typ) Min
▪ Over Current Protection ( OCP )
: Hiccup-Mode
▪ Over Temperature Protection ( OTP ) : Shutdown with Auto-Recovery
----
Expected Lifetime
▪ Lifetime ( Hours )
5
Lifetime
65°C
75°C
Compliance / Safety
▪ EMI / RFI
: ISPR-22 Class B
: FCC part 15 Class B
: EN55015, EMC
: UL 1012, 1310 Class 2, 8750, 879
: CSA C22.2 NO. 107.1
95
----
50,000
30,000
▪ Safety
: CE (IEC/EN61347-1, IEC/EN61347-2-13)
WIRE LENGTH TABLE
TOTAL LENGTH
VDC
24
WATTS
(W)
10 AWG
(5.6mm2)
12 AWG
(3.3mm2)
17
25
40
80
940’
629’
384’
180’
591’
396’
242’
113’
14 AWG
(2.0mm2)
372’
249’
152’
71’
*Distances are based on a 5% Voltage drop max.
● This product must be installed in accordance with the applicable installation code by a
person familiar with the construction and operation of the product and the hazards involved.
16 AWG
(1.3mm2)
234’
157’
96’
45’
18 AWG
20 AWG 22 AWG
24 AWG
(0.78mm2) (0.50mm2) (0.33mm2) (0.20mm2)
147’
98’
60’
28’
RoHS
2011/95/EU
92’
62’
38’
18’
58’
39’
24’
11’
37’
24’
15’
7’
Tested To Comply
With FCC Standards
© 2016, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - [email protected] - www.q-tran.com
26 AWG
(0.13mm 2)
23’
15’
9’
4’
4LZ3
E479456
LED DRIVER
2
INSTALLATION INSTRUCTION
DRIVER
1
1
DIMMER
3
3
_ Negative
+ Positive
#0674 T
F. Q-TRAN P
RISTRIP TM P/N 9881
HOT
LED Tape Light :
Wire lead can be trimmed
to length as needed
NEU
HOT
INPUT
NEU
4
120V AC
GND
OUTPUT
Dimmer
Controller
GND
SECONDARY
24V DC
4
PRIMARY
Driver
2
2
HOT
NEU
GND
1
1
3
_ Negative
+ Positive
3
#0674 T
F. Q-TRAN P
RISTRIP TM P/N 9881
LED Tape Light :
Wire lead can be trimmed
to length as needed
HOT
NEU
GND
SECONDARY
OUTPUT
4
4
24V DC
Driver
2
2
Driver
DRIVER
4 INPUT Wiring Options
4 OUTPUT Wiring Options
1
1
.27"
3
.86"
.55"
4
3
.86"
4
Washer
2
Screw
Knockout
2
© 2016, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - [email protected] - www.q-tran.com
3