New Linear Series
DATE
TYPE
PROJ.
EcoSpec® Linear HP INT 80 Degree - Low Power
FIRM
OVERVIEW / SPECIFICATION
Features:
•
•
•
•
•
•
•
•
•
EcoSpec® New Linear HP INT - Low Power is a high performance luminaire for effective wall washing
applications. This energy efficient, high output, simple installation fixture is designed with superior optics,
and line voltage in-line connections.
A member of the Linear Series, the new EcoSpec New Linear HP INT 80 Degree - Low Power boasts
many improved electrical and mechanical features in an unchanged form factor.
PERFORMANCE
Lumen Output
12”
48”
528 lm/LF
2,112 lm
584 lm/LF
2,336 lm
566 lm/LF
2,264 lm
605 lm/LF
2,420 lm
Economical
Simple Installation
In-line Connection
High Efficacy
Integral Driver / AC Power
Dimmable: ELV (RP), 0-10V
Long Life (L70)
Solid Construction
Efficient Optics
CCT (K)
Optic
Efficacy (lm/W)
2700K
3000K
3500K
4000K
80°x80°
80°x80°
80°x80°
80°x80°
Color Rendering Index
Color Consistency
Lumen Depreciation / Rated Life
80+
2 Step MacAdam Ellipse
L70 >60,000 hours @ 25°C* / L70 50,000 hours @ 50°C*
ELECTRICAL
Power Consumption
CONTROL
Max Fixture Run Length
Power Factor
Operating Voltage
Driver
Startup Temperature
Operating Temperature
Storage Temperature
Dimming
7W/LF Typical (The Typical input power range allows for a +/-10% variation of all components)
8W/LF Maximum (All fixtures are labelled with Maximum wattage)
50’ (15m) @120VAC; 105’ (32m) @220VAC ; 105’ (32m) @277VAC
0.90
100-120VAC, 220-240VAC, 277VAC, 50/60 Hz (all voltages)
Integral to Fixture; De-rated Power and Synchronous Start-up at Full Brightness
-4°F to 122°F (-20°C to 50°C)
-4°F to 122°F (-20°C to 50°C)
-40°F to 176°F (-40°C to 80°C)
100-120VAC ELV type, Reverse Phase, Trailing Edge
220-240VAC ELV type, Reverse Phase, Trailing Edge
277VAC ELV type, Reverse Phase, Trailing Edge
120VAC / 277VAC, 0-10V with Linear Dimming Control Module (LDCM)
W 1.6” x H 1.8” x L 12”/48” ; (40.4mm x 45.1mm x 304.8mm/1,219mm)
Extruded Aluminium; Clear Polycarbonate; Stainless Steel Fasteners
Plastic Endcaps with Plastic/Rubber Overmold for Cable Assembly
0.9lbs. / 0.41kg (1ft) ; 3.73lbs. / 1.7kg (4ft) approx
Integral Male/ Female 3 Pin Connectors on Pigtail Cable Assembly, IP40 Rated
Indoor; CE Cetrtified IP40 / ETL Cetrtified for Dry/Damp Locations
Clear Lens: 80°x 80°, Frosted Lens Accessory Available
Flat Mounting Brackets and Hinge Brackets, Snap on Clip and Mounting Track
81lm/W
86lm/W
88lm/W
90lm/W
* Calculations for LED fixtures are based on measurements that comply with IES LM-80 testing procedures and IES TM-21 Calculator.
PHYSICAL
FIXTURE RATING &
CERTIFICATIONS
Dimensions
Housing / Lens
Weight
Connectors
Environment
Beam Angle
Mounting Options:
CE, C-Tick Certified, CCC
ETL Certified
RoHS
RoHS Compliant
LIMITED WARRANTY
COMPLIANT
5 Years
(**ES and Title 24 - New Linear Select Models - PENDING)
EcoSense THD/Inrush Current Information: Please contact an EcoSense Lighting sales representative
1
EcoSense Lighting Inc.
915 Wilshire Boulevard
Suite 2175
Los Angeles, CA 90017
Phone310-496-6255
Fax310-496-6256
Toll Free 855-632-6736
855-6-ECOSEN
Specifications subject to change without notice. Visit
EcoSenseLighting.com for the most current specifications.
© 2014 EcoSense Lighting Inc. All rights reserved.
EcoSense, the EcoSense logo, and EcoSpec are registered trademark of EcoSense Lighting Inc.
SPEC-HPIS-20140117-V1
ECOSENSELIGHTING.COM
New Linear Series
DATE
TYPE
PROJ.
EcoSpec® Linear HP INT 80 Degree - Low Power
ORDERING
HPIS / HPIL
Choose the option that best suits your needs and write its corresponding
code on the appropriate line to form the product code
-
-
-
MODEL
LENGTH
COLOR
HPIS
#
HPIL
FIRM
120
VOLTAGE
OPTIC
12 - 12”
23 - 2300K
##
120 - 100-120VAC
120 - 120° x 120°
48 - 48”
25 - 2500K##
220 - 220-240VAC
80 - 80° x 80°
27 - 2700K
277 - 277VAC**
30 - 3000K
35 - 3500K
40 - 4000K
EXAMPLE:
HPIS* - 12 - 27 - 120 - 80
HPIL* - 12 - 27 - 120 - 80
#
(*High Power Interior Standard Power)
(*High Power Interior Low Power)
See HP INT Standard Power Spec Sheet for more details
##
See HP INT Warm Cove Spec Sheet for more details
Wiring Options
*INT Leader Cable, 3 Pin, 10ft, 110V
INT3P-A-LDR-120-10
INT Leader Cable, 3 Pin, 10ft, 220V
INT3P-A-LDR-220-10
INT Jumper Cable, 3 Pin, 5ft, 110V
INT3P-A-JMP-120-05
INT Jumper Cable, 3 Pin, 5ft, 220V
INT3P-A-JMP-220-05
INT Jumper Cable, 3 Pin, 1ft, 110V
INT3P-A-JMP-120-01
INT Jumper Cable, 3 Pin, 1ft, 220V
INT3P-A-JMP-220-01
INT Jumper Cable, 3 Pin, 4in, 110V
INT3P-A-JMP-120-4 INT Jumper Cable, 3 Pin, 4in, 220V
INT3P-A-JMP-220-4
* One (1) Terminator included standard with each leader cable.
One Leader Cable is required per circuit / fixture run. Leader cable has bare leads one end, female connector opposite end. Leader / Jumper cables are not rated for plenum applications.
**The 120VAC cables are also rated for 277VAC use.
Control Options
100-120VAC / 277VAC Linear Dimming Control Module 0-10V
LDCM-120-277-010V-GR
100-120VAC / 277VAC Linear Dimming Control Module 0-10V - Plenium Rated
LDCM-PL-120-277-010V-GR
Mounting Options
Flat Mounting Bracket, Interior Cove
INT-A-MNT-FLAT
Included Standard with each product length
Hinge Bracket, Interior Cove
INT-A-MNT-ADJ
Order 1 (one) bracket per 12” length, and 2 (two) bracekts per 48” length
Snap On Clip, Interior Cove
HPI-A-MNT-STA
Order 2 (two) bracket per 12” length, and 2 (two) bracekts per 48” length
Mounting Track, Interior Cove (4’-0” Length)
04-A-MNT-TRK-4
Frosted Lens Option
Frosted Lens, Linear HP INT, 12in
HPI-A-FRLS-12
Snap-on lens before or after mounting fixture.
Frosted Lens, Linear HP INT, 48in
HPI-A-FRLS-48
Snap-on lens before or after mounting fixture.
2
EcoSense Lighting Inc.
915 Wilshire Boulevard
Suite 2175
Los Angeles, CA 90017
Phone310-496-6255
Fax310-496-6256
Toll Free 855-632-6736
855-6-ECOSEN
Specifications subject to change without notice. Visit
EcoSenseLighting.com for the most current specifications.
© 2014 EcoSense Lighting Inc. All rights reserved.
EcoSense, the EcoSense logo, and EcoSpec are registered trademark of EcoSense Lighting Inc.
SPEC-HPIS-20140117-V1
ECOSENSELIGHTING.COM
New Linear Series
DATE
TYPE
PROJ.
EcoSpec® Linear HP INT 80 Degree - Low Power
DIMENSIONS
FIRM
For complete dimensions and submittal drawings, please visit:
ecosenselighting.com
2.3
58.68
1.6
40.36
Flat Mounting Bracket - Direct Mount
0.2
6
1.9
48.68
2.4
60
TYP.
12.0
[ 304 ]
48.0
1219
1.8
46.30
TYP.
1.5
38.60
45°
2.6
65.86
22.5°
12.0
[ 304 ]
3
EcoSense Lighting Inc.
915 Wilshire Boulevard
Suite 2175
Los Angeles, CA 90017
48.0
1219
Phone310-496-6255
Fax310-496-6256
Toll Free 855-632-6736
855-6-ECOSEN
1.8
46.46
TYP.
1.3
32
2.8
71.38
3.9
98
2.2
55.68
0.2
6
2.2
56.18
1.6
40.36
Hinge Bracket - Direct Mount
2.1
52.28
2.1
52.65
Specifications subject to change without notice. Visit
EcoSenseLighting.com for the most current specifications.
© 2014 EcoSense Lighting Inc. All rights reserved.
EcoSense, the EcoSense logo, and EcoSpec are registered trademark of EcoSense Lighting Inc.
SPEC-HPIS-20140117-V1
ECOSENSELIGHTING.COM
New Linear Series
DATE
TYPE
PROJ.
EcoSpec® Linear HP INT 80 Degree - Low Power
DIMENSIONS
FIRM
For complete dimensions and submittal drawings, please visit:
ecosenselighting.com
Snap On Clip - Direct Mount
2.12
53.9
0.98
25
12.0
306
48.0
1221
1.39
35.4
2.08
52.7
Snap On Clip - With Track
2.23
56.6
0.98
25
12.0
306
1.61
41
48.0
1221
2.08
52.7
3
EcoSense Lighting Inc.
915 Wilshire Boulevard
Suite 2175
Los Angeles, CA 90017
Phone310-496-6255
Fax310-496-6256
Toll Free 855-632-6736
855-6-ECOSEN
Specifications subject to change without notice. Visit
EcoSenseLighting.com for the most current specifications.
© 2014 EcoSense Lighting Inc. All rights reserved.
EcoSense, the EcoSense logo, and EcoSpec are registered trademark of EcoSense Lighting Inc.
SPEC-HPIS-20140117-V1
ECOSENSELIGHTING.COM
New Linear Series
DATE
TYPE
PROJ.
EcoSpec® Linear HP INT 80 Degree - Low Power
FIRM
DISTRIBUTIONS
HPIX-XX-XX-XXX-80
80O x 80O
80°
40°
4
EcoSense Lighting Inc.
915 Wilshire Boulevard
Suite 2175
Los Angeles, CA 90017
40°
Phone310-496-6255
Fax310-496-6256
Toll Free 855-632-6736
855-6-ECOSEN
80°
40°
40°
Specifications subject to change without notice. Visit
EcoSenseLighting.com for the most current specifications.
© 2014 EcoSense Lighting Inc. All rights reserved.
EcoSense, the EcoSense logo, and EcoSpec are registered trademark of EcoSense Lighting Inc.
SPEC-HPIS-20140117-V1
ECOSENSELIGHTING.COM
DATE
New Linear Series
TYPE
PROJ.
EcoSpec® Linear HP INT 80 Degree - Low Power
PHOTOMETRY CHARACTERISTICS
2700K*
CHARACTERISTICS:
LINEAR HP INT - LP (HPIL)
2700K / 80°X 80°
Total Rated Fixture Lumens
528
Total Luminaire Efficiency
100%
Total Input Watts
6.56W
Horizontal Beam Angle (50%)
77.2
Vertical Beam Angle (50%)
75.2
Horizontal Field Angle (10%)
113.9
Vertical Field Angle (10%)
111.4
FIRM
80°x 80°
For complete library of IES files, please visit:
ecosenselighting.com
0
5
15
25
35
45
55
65
75
85
90
0
22.5
45
67.5
90
320.58
321.21
326.65
288.75
194.56
96.55
36.43
10.63
2.06
0.53
0.4
321.01
319.26
325.81
299.18
208.97
105.9
39.36
11.65
2.38
0.53
0.39
320.75
316.82
325.92
307.79
223.23
114.76
43.63
13.31
2.59
0.5
0.35
320.79
316.75
326.31
310.43
228.58
123.42
50.07
15.99
3.49
0.58
0.33
321.74
317.36
325.04
307.43
224.56
123.07
52.91
18.23
3.87
0.52
0.18
3.281ft
1m
19.36,30.82fc
208.4,331.7lx
4.707t
143.47cm
6.562ft
2m
4.839,7.704fc
52.09,82.93lx
9.414ft
286.93cm
9.843ft
3m
2.151,3.424fc
23.15,36.86lx
14.12ft
430.40cm
13.12ft
4m
1.210,1.926fc
13.02,20.73lx
18.83ft
573.87cm
16.4ft
5m
0.7743,1.233fc
8.334,13.27lx
Height
3000K
CHARACTERISTICS:
LINEAR HP INT - LP (HPIL)
3000K / 80°X 80°
Total Rated Fixture Lumens
584
Total Luminaire Efficiency
100%
Total Input Watts
6.79W
Horizontal Beam Angle (50%)
78
Vertical Beam Angle (50%)
77.1
Horizontal Field Angle (10%)
116.8
Vertical Field Angle (10%)
114.6
3500K
CHARACTERISTICS:
LINEAR HP INT - LP (HPIL)
3500K / 80°X 80°
Total Rated Fixture Lumens
566
Total Luminaire Efficiency
100%
Total Input Watts
6.68W
Horizontal Beam Angle (50%)
80.8
Vertical Beam Angle (50%)
79.1
Horizontal Field Angle (10%)
119.8
Vertical Field Angle (10%)
115.9
4000K
CHARACTERISTICS:
LINEAR HP INT - LP (HPIL)
4000K / 80°X 80°
Total Rated Fixture Lumens
605
Total Luminaire Efficiency
100%
Total Input Watts
6.74W
Horizontal Beam Angle (50%)
79.5
Vertical Beam Angle (50%)
77.3
Horizontal Field Angle (10%)
117.2
Vertical Field Angle (10%)
114
0
22.5
45
67.5
90
0
5
15
25
35
45
55
65
75
85
90
352.79
356.83
360.19
314.5
215.73
112.03
44.63
13.55
2.53
0.64
0.48
352.5
359.7
368.72
325.18
224.81
117.79
47.45
14.27
2.61
0.63
0.46
352.6
362.28
375.25
335.25
235.61
125.4
50.75
14.87
2.57
0.58
0.38
351.96
362.39
377.01
339.27
243.13
132.73
55.28
16.73
3.3
0.63
0.37
352.32
362.18
375.09
337.68
241.86
134.16
56.5
17.43
3.55
0.47
0.18
0
22.5
45
67.5
90
0
5
15
25
35
45
55
65
75
85
90
317.42
324.68
339.1
309.2
223.11
121.83
48.89
13.78
1.73
0.83
0.6
316.98
321.79
333.17
309.03
229.75
128.38
52.24
15.03
1.91
0.81
0.56
316.55
318.48
326.49
307.55
233.67
133.78
55.51
16.63
2.33
0.73
0.47
316.95
315.18
319.71
301.26
230.57
131.92
57.25
18.67
3.96
0.67
0.39
317.03
312.56
312.66
293
222.33
126.1
55.3
18.71
4.21
0.55
0.19
0
22.5
45
67.5
90
0
5
15
25
35
45
55
65
75
85
90
348.96
345.72
345.17
308.99
214.95
108.27
41.44
12.82
2.59
0.59
0.43
348.95
343.87
343.65
314.11
222.71
112.9
42.32
12.7
2.56
0.56
0.39
348.13
341.81
343.75
318.99
229.95
118.77
45.11
13.44
2.39
0.5
0.32
348
342.59
344.47
319.7
230.33
122.13
49.72
15.71
2.97
0.53
0.3
348.19
344.13
346.37
317.57
226.67
121.27
51.78
16.53
3.21
0.4
0.19
Eavg,Emax
23.53ft
717.33cm
Angle:71.31deg
Diameter
Photometrics by an independant lab in accordance with current IES published Procedures.
*Lumen measurements comply with IES LM-79-08.
IES data is available at www.ecosenselighting.com
EcoSense Lighting Inc.
915 Wilshire Boulevard
Suite 2175
Los Angeles, CA 90017
Phone310-496-6255
Fax310-496-6256
Toll Free 855-632-6736
855-6-ECOSEN
Specifications subject to change without notice. Visit
EcoSenseLighting.com for the most current specifications.
© 2014 EcoSense Lighting Inc. All rights reserved.
EcoSense, the EcoSense logo, and EcoSpec are registered trademark of EcoSense Lighting Inc.
SPEC-HPIS-20140117-V1
ECOSENSELIGHTING.COM