HARTING Electric
Han-Power®
Energy Bus Components
People ï Power ï Partnership
Han® Data Sheet 0080-4
Han-Power® T
Han-Power® T
Part-Number
Drawing
Dimensions in mm
Drawing
Dimensions in mm
09 12 008 4701
Cable gland order separately
see page 5
Han-Power® T with cable
Part-Number
09 12 008 4707
Included in delivery:
3 m pre-assembled cable
Description
The Han-Power® T connector is applied for the assembly of serial power bus. Due to the
T-functionality several users (i.e. motors, etc.) can be connected in series, as long as the
total does not exceed the maximum current. The energy supply is realized by means of a
terminal block with screw termination. The energy transmission as well as the device
interface are realized by means of a Han® Q 8/0 connector.
Features
• 6 screw terminations for max. 4 mm² wire gauges
• Space-saving and compact design
• Leading protective ground in Han® Q 8/0 insert
• Assembly with standard tools
• T-functionality for max. 500 V: - energy bus structure: 7 x 4 mm2
- power supply structure: 7 x 2.5 mm2
• T-piece with pre-assembled cable (valid only for 09 12 008 4707)
- 7 x 2.5 mm² wire gauge
- maximum cable length 3 m
Page 2 / 8
Han-Power® S
Han-Power® S
Part-Number
Drawing
Dimensions in mm
Part-Number
Drawing
Dimensions in mm
09 12 000 9970
09 12 000 9971
09 12 000 9972
09 12 000 9973
Cable
Æ
10-13
13-16
16-19
19-22
09 12 008 4801
Abzweig mit angeformtem
Tüllengehäuse
Sealings
Description
The Han-Power® S connector is suitable for the assembly of serial power bus. Having
assembled the energy supply Han-Power® S can be inserted at any place of the power
cable. The cable mantle has to be removed, the conductor is placed without interruption
in the IDC. Han-Power® S is applied for wire gauges of 2.5 mm² up to 4 mm². For the
distribution to the device a Han® Q 8/0 cable to cable housing is used.
Features
6 IDCs + PE for 2.5 mm² up to 4 mm2 wire gauge
No interruption of the energy supply
Space-saving and compact design
Leading protective ground in Han® Q 8/0 insert
Assembly with standard tools
T-functionality for max. 500 V: - energy bus structure: 7 x 4 mm2
- power supply structure: 7 x 2.5 mm2
• Distribution to device can be realized with a Han® Q 8/0 cable to cable housing
•
•
•
•
•
•
Page 3 / 8
Han-Power®
Technical Details
DIN VDE 61 984
DIN VDE 0110
Inserts Han® Q 8/0
Number of contacts
Bemessungsstrom
Rated voltage
Test voltage
Pollution degree
Insulation resistance
Flammability acc. to UL 94
Mechanical working life
- mating cycles
6 + PE
25 A
500 V
3 kV
3
> 1010 W
V0
Derating-Diagram Han-Power® T
acc. to DIN IEC 512-3
Working current [A]
Specifications
> 500
Contacts
Material
Surface
- hard-silver plated
Contact resistance
Termination
- mm²
- AWG
Ambient temperature [C°]
copper alloy
Han® Q 8/0 partly loaded
with wire gauge: 7 x 4 mm²
3 µm Ag
£ 1 mW
2.5 - 4 mm²
18 - 12
Derating-Diagram Han-Power® S
Hoods / housings
Material
Colour
Sealing
Temperature range
- Power T
- Power S
Flammability acc. to UL 94
Material of locking lever
- Power T
Degree of protection acc. to
DIN 40050 in locked position
Cable gland
- Power-T
polycarbonate
RAL 9005
NBR
Working current [A]
acc. to DIN IEC 512-3
- 25° C ... + 80° C
- 25° C ... + 40° C
V0
polyamide
IP 65
Pg 16
Ambient temperature [C°]
1 = wire gauge 2.5 mm²
2 = wire gauge 4 mm²
Page 4 / 8
Han® Q 8/0 Hoods / Housings
Idenification
Part-Number
Drawing
Dimensions in mm
Hood
with Pg 16 thread
09 12 008 0527
Hood
with Pg 16 thread
09 12 008 0427
Cable to cable
hood
with Pg 16 thread
Bulkhead
mounted housing
09 12 008 0727
09 12 008 0327
Bulkhead mounted housing
angled version
Panel
cut out
09 12 008 0902
Cover
for
for
male insert
female insert
09 12 008 5407 09 12 008 5408
Cable gland
order separately
09 00 000 5059
SW
24
Page 5 / 8
cable
min. max.
11.5 15.5
Han-Power®
Han® Q 8/0 Inserts
Part-Number
Drawing
Dimensions in mm
Drawing
Dimensions in mm
Crimp termination
Crimp contacts
order separately
Han® Contacts
Female insert
Male insert
09 12 008 3001 09 12 008 3101
Wire Gauge
mm2
Part-Number
Power contacts
Silver plated
Relay contact
Operating contact
Identification
1.5
2.5
4.0
09 33 000 6104 09 33 000 6204
09 33 000 6102 09 33 000 6202
09 33 000 6107 09 33 000 6207
Identification of the Crimp Contacts
Identification
Wire gauge
Stripping length
2 grooves
1.5 mm² AWG 16
7.5 mm
2 grooves
2.5 mm² AWG 14
no grooves
Example for installation
Han-Power® T
Han-Power® S
Page 6 / 8
4 mm²
AWG 12
7.5 mm
7.5 mm
Han-InduNet® Cabling System
Cabling System Han® Q 8/0
Energy bus transmission
Connector:
conforming product
More informationen conc. DESINA: www.desina.de
Features
Components
Hoods
Han® Q 8/0 hoods
cable glands order separately
Plastic version
Metal version
polycarbonate
zinc die cast
Inserts*
Han® Q 8/0 male and female are available with standard
crimp contacts Han® E, silver (optional gold) plated
* For further information see catalogue ‘Industrial Division Han® Fiber Optic Components and
Systems’ or ‘www.HARTING.com’
Cable
Outside diameter D
Material outside jacket
Construction: electrical (power supply)
< 14 mm
PUR
7 x 2.5 mm2
Technical Details
Features
Temperature range
- little movements
- permanent movements
-40° C ... +90° C
-20° C ... +70° C
Degree of protection
IP 65 / IP 67
Operating rated voltage [DC]
500 V
Operating rated current
Contact arrangement
male
female
- Chemical application conditions:
very resistant to oil and chemicals
25 A
1
2
3
4
5
6
7
8
PE
Optional
reserved
for N
L2
-
Reserved
for (+24V)
Reserved
for (0V)
L3
-
L1
PE
Page 7 / 8
Han-InduNet® Cabling System
Cabling System in fixed lengths
Part-Number
Cable lengths in m
1.5
20 88 821 0015
(total length)
pre-assembled on both sides,
plastic hood, black,
side entry
3
5
20 88 821 0030
10
20 88 821 0050
20 88 821 0100
15
30
20 88 821 0150
Cable lengths in m
1.5
20 88 861 0015
(total length)
pre-assembled on both sides,
metal hood,
side entry
3
5
20 88 861 0030
20 88 861 0050
10
20 88 861 0100
15
30
20 88 861 0150
20 88 861 0300
Drawing
male
female
à
total length
ß
20 88 821 0300
Other cable lengths
and configurations on request
Accessories
Part-Number
Cover black
only for device side
09 12 008 5407
Components
for male insert
without sealing
09 12 008 5408
for female insert
with sealing
Crimping tool
09 99 000 0021
Use of crimping tool 09 99 000 0110
is also possible
Cable 7 x 2.5 mm2
50 metres
100 metres
250 metres
500 metres
on request
HARTING Electric GmbH & Co. KG
Wilhelm-Harting-Str. 1 • D-32339 Espelkamp
2002-03-27
• P.O. Box 14 73 • D-32328 Espelkamp
Fon: +49/5772/47-97100 • Fax: +49/5772/47-495 • [email protected] • www.HARTING.com
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
HARTING:
20888210015 20888210030 20888210050 20888210100 20888210150 20888210300 20888610015
20888610030 20888610050 20888610100 20888610150 20888610300