LED Flood System
The Loctite® LED Flood System, consisting of a Controller, an LED Cure Array,
and a connecting cable (each sold separately), produces a uniform curing area of
approximately 100mm x 100mm (4" x 4").
This is a unique LED flood system designed for Loctite® UV/visible cure adhesives.
The expected life is over 20,000 hours with proper handling. Unlike traditional arc
lamps, 100% of LED light output is within the usable cure spectrum of Loctite®
adhesives. Each LED Cure Array consists of 144 individual reflectorized LEDs, which
are available in either 375 nm, 405 nm, or Indigo® nm wavelengths. The LED Cure
Array wavelength is selected according to the curing requirements of the adhesive.
The Loctite® LED Flood System is very energy efficient since LEDs produce little
wasted energy and have zero infrared emissions, reducing part heating.
The curing process begins when the adhesive is placed under the LED Cure Array.
The two primary variables that control the curing process are the time of exposure
and the irradiance of the light. For a given irradiance, the exposure time required to
fully cure the adhesive depends primarily on the properties of the adhesive and the
optical properties of the substrate.
PRODUCT FEATURES
Each LED Cure Array is optimized to emit at its specific wavelength
(375, 405, or Indigo® nm wavelength).
• Curing area: 100 mm by 100 mm at a 50 mm distance.
• Typical Irradiance: 190 mW/cm2 at a 50 mm distance.
• 100% duty cycle rating with instant On/Off capabilities.
• Each LED Cure Array is stackable on 100 mm center-to-center
spacing to create a limitless blanket of light.
• The Controller has a digital On/Off timer with 0-99.9 sec. range, plus
a manual mode for use with remote On/Off commands.
• Energy efficient – LEDs produce little wasted energy.
• LEDs produce zero infrared emissions, reducing part heating.
• Fully integrated, self-contained system, including cooling.
Technical Data and Part Numbers
LED Flood System Controller – Item # 1332460
LED Cure Array – Choose one:
LED Flood System Connecting Cable – Item # 1333333
Width: 10.2 inches
Height: 4.2 inches
Length: 15.5 inches
Weight: 12.5 lbs.
Input Power: 85 – 264 V.A.C, 47-63 Hz.
LED 375 nm Cure Array – Item # 1167582
LED 405 nm Cure Array – Item # 1167593
LED Indigo® Cure Array – Item # 1167589
Length: 15.5 inches
Henkel Corporation
One Henkel Way
Rocky Hill, CT 06067
U.S.A.
www.henkelna.com/industrial
Width: 4 inches (100 mm)
Height: 4.5 inches (114 mm)
Length: 6 inches (152 mm)
Weight: approximately 4 lbs. (1.8 Kg)
Utilities: 85 – 264 V.A.C, 47-63 Hz.
Compliance: RoHS
Items Supplied with Loctite® Flood System Controller
• Footswitch
• Operating Manual
• UV/Visible Safety Glasses
Accessories (not included)
• Z eta 7011-V Dosimeter (Item # 98089) – used for LED
Indigo® Cure Array only
• Pair of Cotton Gloves (Item # 984070)
® and ™ designate trademarks of Henkel Corporation or its affiliates. ® = registered in the U.S. Patent and Trademark Office. © Henkel Corporation, 2009.
All rights reserved. 6132/LT-5725 (09/09)