924K, 930K, 938K
Wheel Loaders
924K
930K
938K
Cat® C6.6 ACERT™
Cat® C6.6 ACERT™
Cat® C6.6 ACERT™
ISO 14396
109 kW (146 hp)
119 kW (160 hp)
129 kW (173 hp)
ISO 14396 (DIN)
109 kW (148 hp)
119 kW (162 hp)
Engine Model*
Maximum Gross Power:
Bucket Capacity
1.9-5.0 m (2.5-6.5 yd )
3
3
129 kW (175 hp)
2.1-5.0 m (2.7-6.5 yd )
3
3
2.5-5.0 m3 (3.3-6.5 yd3)
Full Turn Tip Load
7419 kg (16,352 lb)
8369 kg (18,444 lb)
9527 kg (20,997 lb)
Operating Weight
12 868 kg (28,360 lb)
13 829 kg (30,479 lb)
15 928 kg (35,104 lb)
*Engine meets U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards.
Experience the Difference.
Optimized Parallel Lift Z-bar Linkage
Combines the digging efficiency of a traditional
Z-bar with tool carrier capabilities for superior
performance and flexibility.
Cab and Controls
Large, spacious cab features excellent visibility
to the front and rear, extremely low sound levels
and low-effort ergonomic joystick controls so you
can concentrate on your work. In cab adjustments
are easy with intuitive controls and an easy to
read optional display.
Intelligent Power Management
A smooth, step-less electronically controlled
hydrostatic transmission provides adjustable
power to the ground and superb groundspeed
control for fast digging cycles and the flexibility
to efficiently perform a multitude of tasks.
Powerful Predictable Hydraulics
The system senses demand and adjusts flow
and pressure to match. Working with buckets,
forks and other work tools has never been
more efficient.
Work Tools
A new line of optimized Performance Series
buckets, pallet and construction forks as well as a
wide range of work tools are available in a Pin-on,
Fusion™ coupler or ISO 23727 coupler interface.
Serviceability
Daily service points are easily accessible from
ground level. Extended service intervals and
excellent service access make daily checks quick
and easy, allowing you to get to work sooner.
Contents
Parallel Lift Loader Linkage ...............................4
Industry Leading Operator Station ...................5
Power Train ..........................................................6
Hydraulics ............................................................7
Work Tools............................................................8
Options ..................................................................9
Serviceability and Customer Support ............10
Wheel Loader Specifications .........................11
Bucket Specifications ......................................18
Operating Specifications .................................27
Supplemental Specifications ..........................33
Standard Equipment .........................................34
Optional Equipment...........................................35
2
The Cat® 924K, 930K and 938K Wheel Loaders set a new standard for productivity, fuel efficiency
and comfort. Extremely low sound levels, large spacious cab and intuitive controls keep you working
comfortably all day long. The new optimized Z-bar loader linkage delivers the performance and breakout
forces of a traditional Z-bar linkage with the parallelism and load handling capability of a tool carrier.
Experience the new industry benchmark.
3
Parallel Lift Loader Linkage
Optimized Z-bar linkage delivers enhanced
visibility with maximum productivity.
Optimized Z-bar Linkage
The new optimized patent-pending Z-bar linkage combines
the digging efficiency of a traditional Z-bar with tool carrier
capabilities for great performance and versatility.
• Parallel lift and high tilt forces throughout the working
range help you safely and confidently handle loads
with precise control.
• Linkage features excellent visibility to the bucket cutting
edge and fork tips.
• High Lift versions are also available on all three models.
4
Industry Leading Operator Station
Superior visibility, ergonomics and comfort.
Best Seat on the Job Site
Enjoy all day comfort in the spacious new K Series cab:
• Extremely low sound levels.
• Superior visibility to the work tool due to wide curved windshield, redesigned Z-bar linkage,
lines routing and work tool design.
• Automatic climate control.
• A heated and ventilated seat option is available for added comfort in a wide range of climates.
• Seat-mounted, ergonomic joystick for lift and tilt functions. Joystick includes integrated Forward/Neutral/
Reverse switch, differential lock trigger and optional third and fourth function auxiliary hydraulics.
• Easy access to the cab with ergonomically placed grab rails, walk-up steps and large platform.
Easy to Use Instrument Panel and Display
An optional* secondary display provides easy access to vital machine parameters and works in
conjunction with the standard soft touch panel to allow real time adjustments.
• Machine information and diagnostics at a glance.
• Real time and historic fuel usage.
• Backup camera display.
• Help button plus 22 language capability.
• Adjustment of functions such as creep, third function flow, throttle and rimpull.
*Standard feature in Europe.
5
Power Train
Maximum machine power, reduced fuel consumption.
Intelligent Power Management
The Caterpillar exclusive Intelligent Power Management system actively monitors operator input and power availability to keep the
machine working at peak efficiency.
Engine
The Cat® C6.6 ACERT™ engine provides cleaner, quieter operation while delivering superior performance and durability. The engine
meets U.S. EPA Tier 4 Interim and EU Stage IIIB emission requirements. Maximum engine speed is now 1,800 rpm for reduced fuel
consumption and lower sound levels. The engine also features:
• Passive regeneration system – designed to manage itself so you don’t have to.
• Diesel particulate filter that is matched to the anticipated engine overhaul life.
• Class-leading fuel efficiency, significantly reducing owning and operating costs.
• Configurable auto idle shut down feature as standard equipment.
Transmission
A smooth, step-less electronically controlled hydrostatic transmission provides adjustable power to the ground and superb
groundspeed control for a multitude of tasks.
• Four speed ranges ensure maximum controllability for any task.
• Rimpull control enables you to match available tractive power to underfoot conditions, helping reduce tire wear.
• Creeper control lets you adjust machine groundspeed when using work tools such as brooms, snow blowers and brushcutters.
• Throttle lock feature allows you to maintain constant engine RPM regardless of machine speed.
Axles and Brakes
Fully locking front differential axles are standard and can be engaged at full torque on the go with a button on the joystick. Limited slip
differentials are optional on the rear. Brake system includes independent service brakes on front and rear axles and a spring applied,
electronically activated park brake.
6
Hydraulics
Smooth, efficient operation helps you get the job done faster.
Load-Sensing Hydraulic System
K Series machines feature a new electro-hydraulic control system that is governed by the Intelligent Power Management
system. The load-sensing, variable flow system senses work demand and adjusts flow and pressure to match. This allows full
hydraulic forces at any engine speed.
• Programmable in-cab kick-outs are easy to set on the go for tilt, lower and lift. This feature is ideal for applications where the
work cycle is repeatable.
• Caterpillar exclusive electro-hydraulic snubbing at programmed kickouts and rack/dump stops greatly improves operator
comfort and component life in addition to improved material retention.
• Adjustable third function flow through the secondary display (when equipped) for use with hydro-mechanical work tools.
• Optional Ride Control System provides an even smoother ride and excellent material retention.
• Designed with dedicated pumps for steering and implements so there is no compromise in cycle times and efficiency
for multi-function operation.
7
Work Tools
Do more jobs with one machine.
The Right Tool for the Job
An extensive range of work tools and bucket styles are available to make
your Cat Wheel Loader one of the most versatile machines on the job site.
Performance Series Buckets
Performance Series Buckets utilize a system-based approach to balance
bucket shape with the machine’s linkage, weight, lift and tilt capacities.
They deliver higher fill factors and better material retention for significant
productivity and fuel efficiency improvements. The buckets feature a longer
floor, open throat and curved side bars.
Additional Buckets
• Light Material
• Multi Purpose
• Sand and Gravel
• High Dump
• Wood Chip
Material Handling Work Tools
• Pallet Forks
• Construction Forks
• Material Handling Arm
Work Tools for Special Applications
• Dozer Blades
• Snow Plows
• Brooms
• Rakes
• Log and Lumber Forks
• Pipe and Pole Forks
• Side Dump Buckets
• Grapple Buckets
• Grading Buckets
Couplers
The Cat Fusion™ interface provides coupler flexibility without compromise
in breakout force and dump clearance. The advanced wedging mechanism
creates a tight, rattle-free fit, eliminating play and wear for long service life.
The open coupler frame design provides excellent line of sight to the work
tool. An ISO 23727 coupler interface is also available for use with competitive
work tools.
8
Options
Customize your machine to meet your needs.
Configure the Machine the Way You Want It
A variety of options are available on the Cat K Series Wheel Loaders to suit your specific application needs. See your Cat dealer for
more information about the features below and additional options.
Coupler Options
High Lift Linkage
Counterweight Options
HID Lights
Turbine Precleaner
Rear Camera in Grill*
Front Light Guards
Rear Light Guards
Windshield Guard
Flexport™ Tires
3rd and 4th Function Hydraulics
Cold Start Package
Blue Angel Certification
Electric Mirror Adjustment/
Heated Mirrors*
Product Link
Additional options include:
• Power Train Side Guards
• Driveshaft Guard
• Rear Waste Gate
• RESPA Cab Filtration
• Lower Power Train Guard
• Crankcase Guard
• Full Coverage Fenders
• Optional Toolbox
*Standard equipment in Europe.
9
Serviceability
Easy service to keep your machine working.
All service points are accessible from ground level. Three large
service doors can be opened and closed in any order to give full
access to filters and service points. Extended service intervals
reduce service time and maximize uptime. Additional service
features include:
• Diesel particulate filter that is matched for anticipated
engine overhaul life. Passive regeneration system requires
no operator interaction.
• Caterpillar exclusive electric fuel priming pump.
• Jump start studs as standard equipment.
• Single plane cooling system with 6 fins per inch coolers
as standard.
• Swing-up air conditioner condenser for easy clean out.
• Product Link ready (standard).
Customer Support
Unmatched support makes the difference.
Renowned Cat Dealer Support
Your Cat dealer is ready to help you every step of the way. From new
or used machine sales, to rental or rebuild options, your Cat dealer
can provide an optimal solution to your business needs. Unsurpassed
worldwide parts availability, trained technicians and customer
support agreements maximize your machine uptime.
10
924K, 930K, 938K Wheel Loader Specifications
Engine
Engine Model
Maximum Gross Power
ISO 14396
ISO 14396 (DIN)
Rated Net Power @ 1,800 rpm
SAE J1349
ISO 9249 (1977)/EEC 80/1269
ISO 9249 (DIN)
Maximum Gross Torque
ISO 14396
Maximum Net Torque
SAE J1349
ISO 9249 (1977)/EEC 80/1269
Displacement
Bore
Stroke
924K
Cat® C6.6 ACERT™
930K
Cat® C6.6 ACERT™
938K
Cat® C6.6 ACERT™
109 kW
109 kW
146 hp
148 hp
119 kW
119 kW
160 hp
162 hp
129 kW
129 kW
173 hp
175 hp
105 kW
106 kW
106 kW
141 hp
142 hp
144 hp
115 kW
116 kW
116 kW
154 hp
156 hp
158 hp
126 kW
127 kW
127 kW
169 hp
170 hp
173 hp
725 N·m
534 lbf-ft
775 N·m
571 lbf-ft
825 N·m
608 lbf-ft
699 N·m
706 N·m
6.6 L
105 mm
127 mm
515 lbf-ft
520 lbf-ft
402 in3
4 in
5 in
748 N·m
756 N·m
6.6 L
105 mm
127 mm
551 lbf-ft
557 lbf-ft
402 in3
4 in
5 in
802 N·m
811 N·m
6.6 L
105 mm
127 mm
591 lbf-ft
598 lbf-ft
402 in3
4 in
5 in
• Net power ratings are tested at the reference conditions for the specified standard.
• Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner, diesel exhaust filter,
and fan at minimum speed.
• No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
• Flywheel per the SAE reference conditions when the fan is at maximum speed.
• Cat C6.6 engine meets U.S. EPA Tier 4 Interim (EU Stage IIIB) emission requirements.
• K Series Small Wheel Loaders have a passive regeneration system with a long life Diesel Particulate Filter.
Engine Power and Torque
924K
lbf-ft
930K
N·m
kW
hp
lbf-ft
938K
N·m
kW
140
600
120
600
600
80
80
400
80
400
400
40
400
800
1,000
1,200
1,400
1,600
1,800 rpm
500
80
300
160
100
120
600
300
120
500
100
120
60
Power
Torque
160
700
500
100
hp
140
700
500
kW
800
120
160
700
500
N·m
600
Power
Torque
800
120
lbf-ft
140
600
Power
Torque
800
hp
60
40
400
800
1,000
1,200
1,400
1,600
1,800 rpm
500
80
300
60
80
40
400
800
1,000
1,200
1,400
1,600
1,800 rpm
11
924K, 930K, 938K Wheel Loader Specifications
Buckets
• Performance Series Buckets utilize a long floor and open throat resulting in easy loading
and good material retention.
General Purpose
Light Material
924K
1.9-2.5 m3
3.5-5.0 m3
2.5-3.3 yd3
4.6-6.5 yd3
930K
2.1-2.7 m3
3.5-5.0 m3
2.7-3.5 yd3
4.6-6.5 yd3
938K
2.5-3.2 m3
3.5-5.0 m3
3.3-4.2 yd3
4.6-6.5 yd3
924K
12 868 kg
13 166 kg
28,360 lb
29,018 lb
930K
13 829 kg
14 077 kg
30,479 lb
31,024 lb
938K
15 928 kg
16 177 kg
35,104 lb
35,653 lb
Weights
Operating weight – Standard Lift
Operating weight – High Lift
• Specifications shown are for a machine configured with general purpose Fusion bucket, bolt-on cutting edges, counterweights, additional
guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 (L-3) XHA2 tires.
– 924K is configured with a 1.9 m3 (2.5 yd3) Fusion bucket with bolt-on cutting edge.
– 930K is configured with a 2.1 m3 (2.7 yd3) Fusion bucket with bolt-on cutting edge.
– 938K is configured with a 2.5 m3 (3.3 yd3) Fusion bucket with bolt-on cutting edge.
Steering
• Steering system uses a dedicated load sensing variable displacement pump with dual
double acting cylinders.
Steering articulation angle each direction
Steering cylinder: double acting
Bore diameter
Rod diameter
Stroke
Maximum flow – steering pump
Maximum working pressure – steering pump
Maximum steering torque
0° (straight machine)
40° (full turn)
Steering cycle times (full left to full right)
800 rpm: pump flow limited
1,800 rpm: 90 rpm steering wheel speed
Number of steering wheel turns
Full left to full right or full right to full left
12
924K
40°
70 mm
40 mm
438 mm
130 L/min
24 130 kPa
930K
40°
2.8 in
1.6 in
17.2 in
34 gal/min
3,500 psi
70 mm
40 mm
438 mm
130 L/min
24 130 kPa
938K
40°
2.8 in
1.6 in
17.2 in
34 gal/min
3,500 psi
80 mm
50 mm
399 mm
130 L/min
24 130 kPa
3.1 in
2 in
15.7 in
34 gal/min
3,500 psi
50 375 N·m 37,155 lbf-ft
37 620 N·m 27,747 lbf-ft
50 375 N·m 37,155 lbf-ft
37 620 N·m 27,747 lbf-ft
57 630 N·m 42,506 lbf-ft
42 570 N·m 31,398 lbf-ft
2.8 seconds
2.4 seconds
2.8 seconds
2.4 seconds
3.1 seconds
2.3 seconds
3.5 turns
3.5 turns
3.3 turns
Loader Hydraulic System
• Implement system uses a dedicated load sensing variable displacement pump with dual
double acting lift cylinders and a single double acting tilt cylinder.
• 3rd function flow is fully adjustable from 20% to 100% of maximum flow through the
secondary display when equipped.
• 4th function flow is fixed.
Maximum flow – implement pump
3rd function maximum flow
4th function maximum flow
Maximum working pressure –
implement pump
Relief pressure – tilt cylinder
3rd function maximum working pressure
3rd function relief pressure
4th function maximum working pressure
4th function relief pressure
Lift cylinder: double acting
Bore diameter
Rod diameter
Stroke
Tilt cylinder: double acting
Bore diameter
Rod diameter
Stroke
Hydraulic cycle times (1,800 rpm)
Raise (ground level to maximum lift)
Dump (at maximum lift height)
Float down (maximum lift to ground level)
Total cycle time
Hydraulic cycle times (1,000 rpm)
Raise (ground level to maximum lift)
Dump (at maximum lift height)
Float down (maximum lift to ground level)
924K
150 L/min
150 L/min
75 L/min
26 000 kPa
40 gal/min
40 gal/min
20 gal/min
3,771 psi
930K
190 L/min
190 L/min
75 L/min
25 000 kPa
50 gal/min
50 gal/min
20 gal/min
3,626 psi
938K
190 L/min
190 L/min
75 L/min
28 000 kPa
50 gal/min
50 gal/min
20 gal/min
4,061 psi
28 000 kPa
26 000 kPa
28 000 kPa
26 000 kPa
28 000 kPa
4,061 psi
3,771 psi
4,061 psi
3,771 psi
4,061 psi
28 000 kPa
25 000 kPa
28 000 kPa
25 000 kPa
28 000 kPa
4,061 psi
3,626 psi
4,061 psi
3,626 psi
4,061 psi
30 000 kPa
28 000 kPa
30 000 kPa
28 000 kPa
30 000 kPa
4,351 psi
4,061 psi
4,351 psi
4,061 psi
4,351 psi
110 mm
60 mm
728 mm
4.3 in
2.4 in
28.7 in
120 mm
65 mm
728 mm
4.7 in
2.6 in
28.7 in
120 mm
65 mm
789 mm
4.7 in
2.6 in
31.1 in
130 mm
70 mm
555 mm
5.1 in
2.8 in
21.9 in
150 mm
90 mm
555 mm
5.9 in
3.5 in
21.9 in
150 mm
90 mm
555 mm
5.9 in
3.5 in
21.9 in
5.5 seconds
1.5 seconds
2.6 seconds
9.6 seconds
5.1 seconds
1.5 seconds
2.7 seconds
9.3 seconds
5.5 seconds
1.5 seconds
2.7 seconds
9.7 seconds
9.6 seconds
3.0 seconds
2.6 seconds
9.1 seconds
2.6 seconds
2.7 seconds
9.8 seconds
2.6 seconds
2.7 seconds
924K
195 L
30 L
20 L
8.5 L
51.5 gal
7.9 gal
5.3 gal
2.2 gal
930K
195 L
30 L
20 L
8.5 L
51.5 gal
7.9 gal
5.3 gal
2.2 gal
938K
195 L
32 L
20 L
11 L
51.5 gal
8.5 gal
5.3 gal
2.9 gal
21 L
21 L
160 L
90 L
5.5 gal
5.5 gal
42.3 gal
23.8 gal
26 L
25 L
165 L
90 L
6.9 gal
6.6 gal
43.6 gal
23.8 gal
35 L
35 L
170 L
90 L
9.2 gal
9.2 gal
44.9 gal
23.8 gal
Service Refill Capacities
Fuel tank
Cooling system
Engine crankcase
Transmission (gear box)
Axles
Front
Rear
Hydraulic system (including tank)
Hydraulic tank
13
924K, 930K, 938K Wheel Loader Specifications
Transmission
*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph)
to 13 km/h (8 mph) in Range 1 through the secondary display when equipped.
Factory default is 7 km/h (4.4 mph).
924K
Forward
Range 1*
Range 2
Range 3
Range 4
Reverse
Range 1*
Range 2
Range 3
Range 4
930K
938K
1-13 km/h
13 km/h
27 km/h
40 km/h
0.6-8.0 mph
8 mph
17 mph
25 mph
1-13 km/h
13 km/h
27 km/h
40 km/h
0.6-8.0 mph
8 mph
17 mph
25 mph
1-13 km/h
13 km/h
27 km/h
40 km/h
0.6-8.0 mph
8 mph
17 mph
25 mph
1-13 km/h
13 km/h
27 km/h
40 km/h
0.6-8.0 mph
8 mph
17 mph
25 mph
1-13 km/h
13 km/h
27 km/h
40 km/h
0.6-8.0 mph
8 mph
17 mph
25 mph
1-13 km/h
13 km/h
27 km/h
40 km/h
0.6-8.0 mph
8 mph
17 mph
25 mph
Power Train
• Power train is governed by the Caterpillar exclusive Intelligent Power Management system
to deliver peak performance and efficiency.
**Differential front locking axle can be engaged on the go at full torque up to 10 km/h
(6.2 mph) on the 924K/930K and up to 20 km/h (12.4 mph) on the 938K.
Front axle
Traction aid**
Rear axle
Oscillation with 17.5 tires
Oscillation with 20.5 tires
Traction aid
Brakes
Service brakes
Park brake
14
924K
Fixed
Locking differential
standard
Oscillating
± 13 degrees
± 11 degrees
Limited slip differential
optional
930K
Fixed
Locking differential
standard
Oscillating
–
± 11 degrees
Limited slip differential
optional
938K
Fixed
Locking differential
standard
Oscillating
–
± 11 degrees
Limited slip differential
optional
Inboard wet disc
Spring applied
hydraulically released
Inboard wet disc
Spring applied
hydraulically released
Outboard wet disc
Spring applied
hydraulically released
Tires
17.5 R25, radial (L-2)
17.5 R25, radial (L-3)
17.5 R25, radial (L-5)
20.5-25, 12PR (L-2)
20.5-25, 12PR (L-3)
20.5-25, 16PR (L-5)
20.5 R25, radial (L-2)
20.5 R25, radial (L-3)*
20.5 R25, radial (L-5)
550/65 R25, radial (L-3)
600/65 R25, radial (L-3)
650/65 R25, radial (L-3)
Skidder/Agriculture
Flexports Gen II
924K
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
930K
938K
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
*Standard tire.
• Other tire choices available, contact your Cat dealer for details. Not all tires are available in all regions.
• In certain applications, the loader’s productive capabilities may exceed the tires’ tonnes-km/h (ton-mph) capabilities.
• Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Cab
• ROPS: SAE J1040 MAY94, ISO 3471-1994.
• FOPS: SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II.
• Cat cab and Rollover Protective Structures (ROPS) are standard in North America
and Europe.
• The declared dynamic operator sound pressure levels per ISO 6396:2008**,
when properly installed and maintained, are:
– Standard cab: 68 ±3 dB(A)
– Deluxe cab: 66 ±2 dB(A)
**The measurements were conducted with the cab doors and windows closed
and at 70% of the maximum engine cooling fan speed. The sound level may
vary at different engine cooling fan speeds.
Operating Specifications
Tipping load – straight (ISO 14397-1)
Tipping load – full turn (ISO 14397-1)
Clearance: full lift and 45° dump
Reach: full lift and 45° dump
Steering articulation angle each direction
924K
8644 kg
7419 kg
2885 mm
1024 mm
40°
19,051 lb
16,352 lb
9'5"
3'4"
930K
9803 kg
8369 kg
2828 mm
1064 mm
40°
21,605 lb
18,444 lb
9'3"
3'5"
938K
11 209 kg
9527 kg
2834 mm
1146 mm
40°
24,704 lb
20,997 lb
9'3"
3'9"
15
924K, 930K, 938K Wheel Loader Specifications
Dimensions with Bucket
All dimensions are approximate. Dimensions will vary with bucket and tire choice. Refer to Operating Specifications with Buckets.
23
17
19
13
24
12
11
10
21
2
14
22
1
9
25
16
27
26
4
15
3
6
7
18
20
8
5
Standard Lift
** 1 Height: ground to cab
** 2 Height: ground to beacon
** 3 Height: ground axle center
** 4 Height: ground clearance
* 5 Length: overall
924K
3340 mm
10'11"
930K
3340 mm
10'11"
938K
3340 mm
10'11"
3669 mm
12'0"
3669 mm
12'0"
3669 mm
12'0"
685 mm
2'2"
685 mm
2'2"
685 mm
2'2"
400 mm
1'3"
400 mm
1'3"
390 mm
1'3"
7451 mm
24'5"
7530 mm
24'8"
7656 mm
25'1"
6'5"
6 Length: rear axle to bumper
7 Length: hitch to front axle
1986 mm
6'6"
1993 mm
6'6"
1968 mm
1500 mm
4'11"
1500 mm
4'11"
1525 mm
5'0"
8 Length: wheel base
* 9 Clearance: bucket at 45°
** 10 Clearance: load over height
3000 mm
9'10"
3000 mm
9'10"
3050 mm
10'0"
2885 mm
9'5"
2828 mm
9'3"
2834 mm
9'3"
3330 mm
10'11"
3331 mm
10'11"
3354 mm
11'0"
** 11 Clearance: level bucket
** 12 Height: bucket pin
3580 mm
11'8"
3580 mm
11'8"
3641 mm
11'11"
3907 mm
12'9"
3907 mm
12'9"
3969 mm
13'0"
** 13 Height: overall
* 14 Reach: bucket at 45°
5076 mm
16'7"
5147 mm
16'10"
5273 mm
17'3"
1024 mm
3'4"
1064 mm
3'5"
1146 mm
3'9"
15 Carry height: bucket pin
** 16 Dig depth
458 mm
1'6"
458 mm
1'6"
467 mm
1'6"
100 mm
3.9"
100 mm
3.9"
101 mm
3.9"
17 Width: bucket
18 Width: tread center
2550 mm
8'4"
2550 mm
8'4"
2750 mm
9'0"
1930 mm
6'3"
1930 mm
6'3"
2065 mm
6'9"
19 Turning radius: over bucket
20 Width: over tires
5924 mm
19'5"
5945 mm
19'6"
6133 mm
20'1"
2540 mm
8'4"
2540 mm
8'4"
2675 mm
8'9"
21 Turning radius: outside of tires
22 Turning radius: inside of tires
5402 mm
17'8"
5402 mm
17'8"
5537 mm
18'1"
9'4"
2851 mm
9'4"
2852 mm
2851 mm
54°
54°
54°
50°
49°
49°
25 Rack angle at carry
26 Departure angle
45°
45°
45°
33°
33°
33°
27 Articulation angle
Operating weight
40°
40°
40°
12 868 kg
28,360 lb
13 829 kg
30,479 lb
15 928 kg
*Vary with bucket.
**Vary with tire.
Dimensions listed are for a machine configured with general purpose Fusion bucket, bolt-on cutting edge, counterweights,
additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.
16
9'4"
23 Rack angle at full lift
24 Dump angle at full lift
35,104 lb
Dimensions with Bucket
High Lift
** 1 Height: ground to cab
** 2 Height: ground to beacon
** 3 Height: ground axle center
** 4 Height: ground clearance
924K
3340 mm
10'11"
930K
3340 mm
10'11"
938K
3340 mm
10'11"
3669 mm
12'0"
3669 mm
12'0"
3669 mm
12'0"
685 mm
2'2"
685 mm
2'2"
685 mm
2'2"
400 mm
1'3"
400 mm
1'3"
390 mm
1'3"
8093 mm
26'6"
8324 mm
27'3"
8397 mm
27'6"
1986 mm
6'6"
1993 mm
6'6"
1968 mm
6'5"
1500 mm
4'11"
1500 mm
4'11"
1525 mm
5'0"
3000 mm
9'10"
3000 mm
9'10"
3050 mm
10'0"
* 9 Clearance: bucket at 45°
** 10 Clearance: load over height
** 11 Clearance: level bucket
3378 mm
11'0"
3421 mm
11'2"
3415 mm
11'2"
3550 mm
11'7"
3540 mm
11'7"
3561 mm
11'8"
4073 mm
13'4"
4173 mm
13'8"
4222 mm
13'10"
** 12 Height: bucket pin
** 13 Height: overall
4400 mm
14'5"
4500 mm
14'9"
4550 mm
14'11"
5569 mm
18'3"
5740 mm
18'9"
5853 mm
19'2"
1261 mm
4'1"
1385 mm
4'6"
1413 mm
4'7"
649 mm
2'1"
692 mm
2'3"
686 mm
2'2"
135 mm
5.3"
135 mm
5.3"
135 mm
5.3"
* 5 Length: overall
6 Length: rear axle to bumper
7 Length: hitch to front axle
8 Length: wheel base
* 14 Reach: bucket at 45°
15 Carry height: bucket pin
** 16 Dig depth
17 Width: bucket
2550 mm
8'4"
2550 mm
8'4"
2750 mm
9'0"
18 Width: tread center
19 Turning radius: over bucket
1930 mm
6'3"
1930 mm
6'3"
2065 mm
6'9"
6234 mm
20'5"
6329 mm
20'9"
6490 mm
21'3"
20 Width: over tires
21 Turning radius: outside of tires
2540 mm
8'4"
2540 mm
8'4"
2675 mm
8'9"
5402 mm
17'8"
5402 mm
17'8"
5537 mm
18'1"
22 Turning radius: inside of tires
23 Rack angle at full lift
2851 mm
9'4"
2851 mm
9'4"
2852 mm
9'4"
51°
53°
53°
24 Dump angle at full lift
25 Rack angle at carry
49°
48°
47°
49°
50°
50°
26 Departure angle
27 Articulation angle
33°
33°
33°
40°
Operating weight
13 166 kg
40°
29,018 lb
14 077 kg
40°
31,024 lb
16 177 kg
35,653 lb
*Vary with bucket.
**Vary with tire.
Dimensions listed are for a machine configured with general purpose Fusion bucket, bolt-on cutting edge, counterweights,
additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.
Supplemental Operating Data – Tires
924K
550/65 R25
930K
17.5 R25 (L-2)
600/65 R25
938K
20.5R25 (L-5)
650/65 R25
Vertical heights
Reach: bucket at 45°
Width: over tires
Turning radius: outside of tires
Turning radius: inside of tires
mm
–70
+43
+21
+4
–11
in
–2.8"
+1.7"
+0.8"
+0.2"
–0.4"
mm
–99
+75
–69
–45
35
in
–3.9"
+3"
–2.7"
–1.8"
+1.4"
mm
–55
+29
+98
+42
–49
in
–2.2"
+1.1"
+3.9"
+1.7"
–1.9"
mm
+15
–21
0
+1
0
in
+0.6"
–0.8"
0"
0"
0"
mm
–35
–5
+121
+53
–61
in
–1.4"
–0.2"
+4.8"
+2.1"
–2.4"
Tipping load – straight
Tipping load – full turn
Operating weight
kg
–83
–72
–126
lb
–182
–157
–277
kg
–348
–301
–530
lb
–767
–663
–1,167
kg
+9
+8
+14
lb
+19
+17
+30
kg
+444
+384
+678
lb
+978
+846
+1,494
kg
+137
+118
+210
lb
+301
+260
+462
Flexport (Gen II)
mm
+59
–23
+65
+61
–33
in
+2.3"
–0.9"
+2.6"
+2.4"
–1.3"
kg
lb
+1864 +4,108
+1612 +3,552
+2866 +6,316
17
Bucket Specifications
924K Operating Specifications with Buckets
General Purpose
Pin On
Rated capacity
Struck capacity
Width: bucket
Nominal material density, 100% fill factor
Clearance: full lift, 45° dump
Reach: full lift, 45° dump
Reach: 2130 mm (7'0") clearance, 45° dump
Reach: level arm, level bucket
Dig depth
Length: overall
Height: overall
Turning radius, bucket at carry
Tipping load – straight, ISO 14397-1*
Tipping load – straight, rigid tire**
Tipping load – full turn, ISO 14397-1*
Tipping load – full turn, rigid tire**
Breakout force
Operating weight
m3
yd3
m3
yd3
mm
ft/in
kg/m3
lb/yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
1.9
2.5
1.7
2.2
2550
8'4"
2048
3,430
2912
9'6"
992
3'3"
1547
5'0"
2278
7'5"
100
3.9"
7409
24'3"
5052
16'6"
5912
19'4"
9029
19,899
9405
20,728
7783
17,152
8279
18,247
10 685
23,550
12 527
27,608
2.1
2.7
1.9
2.5
2550
8'4"
1834
3,144
2855
9'4"
1033
3'4"
1560
5'1"
2350
7'8"
100
3.9"
7481
24'6"
5122
16'9"
5933
19'5"
8942
19,708
9315
20,530
7702
16,975
8194
18,059
9956
21,943
12 571
27,706
Fusion
2.3
3.0
2.1
2.7
2550
8'4"
1658
2,801
2807
9'2"
1070
3'6"
1573
5'1"
2413
7'11"
100
3.9"
7544
24'9"
5180
16'11"
5951
19'6"
8860
19,527
9229
20,340
7626
16,808
8113
17,881
9388
20,691
12 609
27,790
1.9
2.5
1.7
2.2
2550
8'4"
1952
3,270
2885
9'5"
1024
3'4"
1566
5'1"
2320
7'7"
100
3.9"
7451
24'5"
5076
16'7"
5924
19'5"
8644
19,051
9004
19,845
7419
16,352
7893
17,396
10 223
22,531
12 868
28,360
2.1
2.7
1.9
2.5
2550
8'4"
1748
2,996
2828
9'3"
1064
3'5"
1578
5'2"
2392
7'10"
100
3.9"
7523
24'8"
5147
16'10"
5945
19'6"
8560
18,865
8916
19,651
7341
16,180
7810
17,212
9547
21,041
12 912
28,458
ISO 23727
2.3
3.0
2.1
2.7
2550
8'4"
1580
2,670
2779
9'1"
1102
3'7"
1590
5'2"
2455
8'0"
100
3.9"
7586
24'10"
5205
17'0"
5964
19'6"
8480
18,690
8833
19,468
7268
16,018
7732
17,040
9019
19,876
12 950
28,541
2.1
2.7
2.0
2.6
2550
8'4"
1682
2,882
2747
9'0"
1168
3'9"
1639
5'4"
2523
8'3"
93
3.7"
7648
25'1"
5236
17'2"
5964
19'6"
8235
18,150
8578
18,906
7062
15,565
7513
16,559
8451
18,625
12 859
28,342
2.3
3.0
2.2
2.9
2550
8'4"
1520
2,568
2698
8'10"
1205
3'11"
1648
5'4"
2586
8'5"
93
3.7"
7711
25'3"
5294
17'4"
5984
19'7"
8157
17,978
8497
18,727
6990
15,406
7437
16,390
8020
17,675
12 897
28,426
*Full compliance to ISO 14397-1 (2007) Sections 1 through 6, which requires 2% verification between calculation and testing.
**Compliance to ISO 14397-1 (2007) Sections 1 through 5.
Dimensions listed are for a 924K configured with bucket, bolt-on cutting edge, standard counterweights, additional guarding, 80 kg (176 lb)
operator, and Michelin 20.5 R25 (L-3) XHA2 tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
18
924K Operating Specifications with Buckets
Light Material
Pin On
Rated capacity
Struck capacity
Width: bucket
Nominal material density, 100% fill factor
Clearance: full lift, 45° dump
Reach: full lift, 45° dump
Reach: 2130 mm (7'0") clearance, 45° dump
Reach: level arm, level bucket
Dig depth
Length: overall
Height: overall
Turning radius, bucket at carry
Tipping load – straight, ISO 14397-1*
Tipping load – straight, rigid tire**
Tipping load – full turn, ISO 14397-1*
Tipping load – full turn, rigid tire**
Breakout force
Operating weight
m3
yd3
m3
yd3
mm
ft/in
kg/m3
lb/yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
3.5
4.6
3.3
4.3
2750
9'0"
1030
1,727
2629
8'7"
1137
3'8"
1538
5'0"
2603
8'6"
100
3.9"
7734
25'4"
5284
17'4"
6099
20'0"
8418
18,553
8769
19,326
7210
15,890
7670
16,905
7888
17,385
12 925
28,487
4.2
5.5
4.0
5.2
2750
9'0"
829
1,395
2509
8'2"
1257
4'1"
1579
5'2"
2773
9'1"
100
3.9"
7904
25'11"
5445
17'10"
6152
20'2"
8149
17,959
8488
18,708
6962
15,343
7406
16,322
6893
15,192
13 062
28,789
High Lift
Fusion
5.0
6.5
4.8
6.3
2750
9'0"
693
1174
2509
8'2"
1257
4'1"
1579
5'2"
2773
9'1"
100
3.9"
7904
25'11"
5725
18'9"
6152
20'2"
8116
17,887
8454
18,632
6927
15,267
7369
16,242
6842
15,080
13 132
28,943
3.5
4.6
3.3
4.3
2750
9'0"
979
1,642
2600
8'6"
1166
3'9"
1549
5'0"
2645
8'8"
100
3.9"
7776
25'6"
5309
17'5"
6112
20'0"
8040
17,720
8375
18,459
6853
15,104
7291
16,068
7603
16,757
13 275
29,258
4.2
5.5
4.0
5.2
2750
9'0"
787
1,324
2479
8'1"
1286
4'2"
1588
5'2"
2815
9'2"
100
3.9"
7946
26'0"
5471
17'11"
6166
20'2"
7776
17,138
8100
17,852
6609
14,567
7031
15,497
6660
14,678
13 415
29,566
5.0
6.5
4.8
6.3
2750
9'0"
658
1115
2479
8'1"
1286
4'2"
1588
5'2"
2815
9'2"
100
3.9"
7946
26'0"
5752
18'10"
6166
20'2"
7745
17,070
8068
17,781
6577
14,496
6997
15,421
6611
14,571
13 480
29,709
–
–
–
–
–
–
–
–
+493
+1'7"
+237
+9"
+572
+1'10"
+523
+1'8"
+35
+1.4"
+642
+2'1"
+493
+1'7"
+311
+1'0"
–2145
–4,726
–2234
–4,923
–1892
–4,170
–2013
–4,436
–494
–1,089
+299
+659
*Full compliance to ISO 14397-1 (2007) Sections 1 through 6, which requires 2% verification between calculation and testing.
**Compliance to ISO 14397-1 (2007) Sections 1 through 5.
Dimensions listed are for a 924K configured with bucket, bolt-on cutting edge, standard counterweights, additional guarding, 80 kg (176 lb)
operator, and Michelin 20.5 R25 (L-3) XHA2 tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
19
Bucket Specifications
924K Bucket Selection Table
m3
1.9
2.1
2.3
1.9
2.1
2.3
kg/m3 1375 1450
lb/yd3 2,317 2,443
yd3
2.5
2.7
3.0
114%
2.5
2.7
3.0
115% 109%
m3
3.5
4.2
5.0
3.5
4.2
5.0
kg/m3 600
650
lb/yd3 1,011 1,095
yd3
4.6
5.5
6.5
107%
4.6
5.5
6.5
110% 101%
General
Purpose
Bucket Fill Factor
Pin On
Fusion
Light
Material
Bucket Fill Factor
Pin On
Fusion
1525
2,570
1600
2,696
1675
2,822
109%
115%
104%
109%
99%
115%
104%
109%
99%
104%
94%
700
1,180
750
1,264
800
1,348
111%
104%
105%
98%
1750
2,949
1825
3,075
1900
3,202
1975
3,328
112%
100%
108%
97%
104%
100%
105%
95%
112%
100%
107%
96%
103%
99%
95%
850
1,432
900
1,517
950
1,601
1000
1,685
1050
1,769
114%
108%
103%
109%
103%
98%
98%
99%
112%
2050
3,454
98%
2125
3,581
96%
High Lift
kg/m3 lb/yd3
–501 –845
–451 –759
–408 –688
–494 –833
–444 –748
–403 –679
1100
1,854
High Lift
kg/m3 lb/yd3
–262 –442
–214 –360
–181 –305
–259 –436
–211 –356
–178 –301
Material density and fill factor are key variables when choosing the appropriate size of the bucket. The long floor and open throat design
of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater
than 100% ISO rated. Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing.
924K Fill Factors
Materials
Earth and rock
Sand and gravel
Aggregates
Bulk grains
Woodchips
Density
3
~ 1800 kg/m
~ 1700 kg/m3
~ 1600 kg/m3
~ 750 kg/m3
~ 500 kg/m3
3
~ 3,033 lb/yd
~ 2,865 lb/yd3
~ 2,696 lb/yd3
~ 1,264 lb/yd3
~ 843 lb/yd3
Fill %
~ 115%
~ 110%
~ 105%
~ 100%
~ 100%
924K Ground Engagement Options
Dig depth
Length: overall
Dump clearance
Reach
Tipping load – straight
Tipping load – full turn
Breakout force
Operating weight
20
Long Teeth and Segments
+12 mm
+0.5 in
+146 mm
+5.7 in
–103 mm
–4.1 in
+104 mm
+4.1 in
–148 kg
–325 lb
–145 kg
–318 lb
–121 kg
–266 lb
+120 kg
+264 lb
Short Teeth and Segments
+5 mm
+0.2 in
+121 mm
+4.8 in
–82 mm
–3.2 in
+89 mm
+3.5 in
–142 kg
–311 lb
–139 kg
–305 lb
–115 kg
–254 lb
+116 kg
+255 lb
930K Operating Specifications with Buckets
General Purpose
Pin On
Rated capacity
Struck capacity
Width: bucket
Nominal material density, 100% fill factor
Clearance: full lift, 45° dump
Reach: full lift, 45° dump
Reach: 2130 mm (7'0") clearance, 45° dump
Reach: level arm, level bucket
Dig depth
Length: overall
Height: overall
Turning radius, bucket at carry
Tipping load – straight, ISO 14397-1*
Tipping load – straight, rigid tire**
Tipping load – full turn, ISO 14397-1*
Tipping load – full turn, rigid tire**
Breakout force
Operating weight
m3
yd3
m3
yd3
mm
ft/in
kg/m3
lb/yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
2.1
2.7
1.9
2.5
2550
8'4"
2082
3,568
2855
9'4"
1033
3'4"
1560
5'1"
2350
7'8"
100
3.9"
7488
24'6"
5122
16'9"
5933
19'5"
10 202
22,484
10 627
23,421
8743
19,269
9301
20,499
12 881
28,388
13 488
29,727
2.3
3.0
2.1
2.7
2550
8'4"
1883
3,182
2807
9'2"
1070
3'6"
1573
5'1"
2413
7'11"
100
3.9"
7551
24'9"
5180
16'11"
5951
19'6"
10 114
22,290
10 535
23,219
8662
19,091
9215
20,310
12 158
26,796
13 526
29,811
Fusion
2.5
3.3
2.3
3.0
2550
8'4"
1706
2,849
2761
9'0"
1109
3'7"
1587
5'2"
2475
8'1"
100
3.9"
7613
24'11"
5239
17'2"
5970
19'7"
9976
21,986
10 391
22,902
8532
18,805
9077
20,005
11 488
25,318
13 625
30,029
2.1
2.7
1.9
2.5
2550
8'4"
1993
3,416
2828
9'3"
1064
3'5"
1578
5'2"
2392
7'10"
100
3.9"
7530
24'8"
5147
16'10"
5945
19'6"
9803
21,605
10 212
22,506
8369
18,444
8903
19,621
12 366
27,254
13 829
30,479
2.3
3.0
2.1
2.7
2550
8'4"
1802
3,045
2779
9'1"
1102
3'7"
1590
5'2"
2455
8'0"
100
3.9"
7593
24'10"
5205
17'0"
5964
19'6"
9718
21,418
10 123
22,310
8291
18,272
8820
19,438
11 693
25,772
13 867
30,562
ISO 23727
2.5
3.3
2.3
3.0
2550
8'4"
1631
2,722
2733
8'11"
1140
3'8"
1603
5'3"
2517
8'3"
100
3.9"
7655
25'1"
5264
17'3"
5983
19'7"
9571
21,095
9970
21,974
8153
17,968
8673
19,115
11 063
24,382
13 978
30,808
2.3
3.0
2.2
2.9
2550
8'4"
1734
2,929
2698
8'10"
1205
3'11"
1648
5'4"
2586
8'5"
93
3.7"
7718
25'3"
5294
17'4"
5984
19'7"
9349
20,604
9738
21,463
7975
17,576
8484
18,698
10 432
22,991
13 815
30,447
2.5
3.3
2.4
3.1
2750
9'0"
1576
2,632
2698
8'10"
1205
3'11"
1648
5'4"
2586
8'5"
93
3.7"
7718
25'3"
5294
17'4"
6075
19'11"
9252
20,391
9637
21,240
7881
17,368
8384
18,477
10 375
22,867
13 918
30,674
*Full compliance to ISO 14397-1 (2007) Sections 1 through 6, which requires 2% verification between calculation and testing.
**Compliance to ISO 14397-1 (2007) Sections 1 through 5.
Dimensions listed are for a 930K configured with bucket, bolt-on cutting edge, heavy counterweights, additional guarding, 80 kg (176 lb)
operator, and Michelin 20.5 R25 (L-3) XHA2 tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
21
Bucket Specifications
930K Operating Specifications with Buckets
Light Material
Pin On
Rated capacity
Struck capacity
Width: bucket
Nominal material density, 100% fill factor
Clearance: full lift, 45° dump
Reach: full lift, 45° dump
Reach: 2130 mm (7'0") clearance, 45° dump
Reach: level arm, level bucket
Dig depth
Length: overall
Height: overall
Turning radius, bucket at carry
Tipping load – straight, ISO 14397-1*
Tipping load – straight, rigid tire**
Tipping load – full turn, ISO 14397-1*
Tipping load – full turn, rigid tire**
Breakout force
Operating weight
3
m
yd3
m3
yd3
mm
ft/in
kg/m3
lb/yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
3.5
4.6
3.3
4.3
2750
9'0"
1176
1972
2629
8'7"
1137
3'8"
1538
5'0"
2603
8'6"
100
3.9"
7741
25'4"
5284
17'4"
6099
20'0"
9652
21,273
10 054
22,159
8230
18,138
8755
19,296
10 277
22,649
13 842
30,508
4.2
5.5
4.0
5.2
2750
9'0"
948
1,596
2509
8'2"
1257
4'1"
1579
5'2"
2773
9'1"
100
3.9"
7911
25'11"
5445
17'10"
6152
20'2"
9365
20,640
9755
21,500
7966
17,557
8475
18,678
9020
19,879
13 979
30,810
High Lift
Fusion
5.0
6.5
4.8
6.3
2750
9'0"
793
1,345
2509
8'2"
1257
4'1"
1579
5'2"
2773
9'1"
100
3.9"
7911
25'11"
5725
18'9"
6152
20'2"
9334
20,572
9723
21,429
7934
17,486
8440
18,602
8969
19,767
14 049
30,965
3.5
4.6
3.3
4.3
2750
9'0"
1123
1883
2600
8'6"
1166
3'9"
1549
5'0"
2645
8'8"
100
3.9"
7783
25'6"
5309
17'5"
6112
20'0"
9259
20,406
9645
21,256
7860
17,323
8362
18,429
9921
21,864
14 192
31,280
4.2
5.5
4.0
5.2
2750
9'0"
905
1,523
2479
8'1"
1286
4'2"
1588
5'2"
2815
9'2"
100
3.9"
7953
26'1"
5471
17'11"
6166
20'2"
8977
19,785
9351
20,609
7602
16,754
8087
17,823
8730
19,240
14 332
31,587
5.0
6.5
4.8
6.3
2750
9'0"
757
1,284
2479
8'1"
1286
4'2"
1588
5'2"
2815
9'2"
100
3.9"
7953
26'1"
5752
18'10"
6166
20'2"
8948
19,722
9321
20,543
7571
16,687
8055
17,752
8682
19,134
14 397
31,731
–
–
–
–
–
–
–
–
+593
+1'11"
+320
+1'0"
+717
+2'4"
+653
+2'1"
+35
+1.4"
+794
+2'7"
+593
+1'11"
+384
+1'3"
–2795
–6,160
–2912
–6,417
–2452
–5,404
–2609
–5,749
–299
–658
+247
+544
*Full compliance to ISO 14397-1 (2007) Sections 1 through 6, which requires 2% verification between calculation and testing.
**Compliance to ISO 14397-1 (2007) Sections 1 through 5.
Dimensions listed are for a 930K configured with bucket, bolt-on cutting edge, heavy counterweights, additional guarding, 80 kg (176 lb)
operator, and Michelin 20.5 R25 (L-3) XHA2 tires at a pressure of 4.14 bar (60 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
22
930K Bucket Selection Table
m3
2.1
2.3
2.5
2.1
2.3
2.5
kg/m3 1375
lb/yd3 2,317
yd3
2.7
3.0
3.3
2.7
3.0
3.3
m3
3.5
4.2
5.0
3.5
4.2
5.0
General Purpose
Bucket
Fill Factor
Pin On
Fusion
Light Material
Bucket
Fill Factor
Pin On
Fusion
1450
2,443
1525
2,570
1600
2,696
1675
2,822
112%
107%
112%
102%
112%
107%
113%
102%
108%
97%
kg/m3 700
750
lb/yd3 1,180 1,264
yd3
4.6
5.5
6.5 113% 106%
4.6
5.5
6.5 108% 101%
800
1,348
850
1,432
900
1,517
1750
2,949
108%
98%
114%
103%
950
1,601
112%
105%
100%
106%
101%
95%
1825
3,075
1900
3,202
1975
3,328
2050
3,454
114%
103%
110%
99%
105%
95%
102%
109%
99%
105%
95%
101%
97%
1000
1,685
1050
1,769
1100
1,854
1150
1,938
112%
107%
102%
107%
102%
98%
95%
99%
112%
113%
95%
2125
3,581
2200
3,707
kg/m3 lb/yd3
–588 –992
–533 –898
–487 –821
–580 –977
–525 –885
–480 –809
98%
1200
2,022
98%
High Lift
1250
2,106
94%
High Lift
kg/m3 lb/yd3
–341 –575
–278 –468
–234 –395
–337 –568
–274 –462
–231 –389
Material density and fill factor are key variables when choosing the appropriate size of the bucket. The long floor and open throat design
of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater
than 100% ISO rated. Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing.
930K Fill Factors
Materials
Earth and rock
Sand and gravel
Aggregates
Bulk grains
Woodchips
Density
3
~ 1800 kg/m
~ 1700 kg/m3
~ 1600 kg/m3
~ 750 kg/m3
~ 500 kg/m3
3
~ 3,033 lb/yd
~ 2,865 lb/yd3
~ 2,696 lb/yd3
~ 1,264 lb/yd3
~ 843 lb/yd3
Fill %
~ 115%
~ 110%
~ 105%
~ 100%
~ 100%
930K Ground Engagement Options
Dig depth
Length: overall
Dump clearance
Reach
Tipping load – straight
Tipping load – full turn
Breakout force
Operating weight
Long Teeth and Segments
+11 mm
+0.4 in
+146 mm
+5.7 in
–104 mm
–4.1 in
+103 mm
+4.1 in
–150 kg
–329 lb
–146 kg
–322 lb
–121 kg
–266 lb
+120 kg
+264 lb
Short Teeth and Segments
+5 mm
+0.2 in
+121 mm
+4.8 in
–83 mm
–3.3 in
+88 mm
+3.5 in
–143 kg
–315 lb
–140 kg
–309 lb
–115 kg
–254 lb
+116 kg
+255 lb
23
Bucket Specifications
938K Operating Specifications with Buckets
General Purpose
Fusion
Pin On
Rated capacity
Struck capacity
Width: bucket
Nominal material density, 100% fill factor
Clearance: full lift, 45° dump
Reach: full lift, 45° dump
Reach: 2130 mm (7'0") clearance, 45° dump
Reach: level arm, level bucket
Dig depth
Length: overall
Height: overall
Turning radius, bucket at carry
Tipping load – straight, ISO 14397-1*
Tipping load – straight, rigid tire**
Tipping load – full turn, ISO 14397-1*
Tipping load – full turn, rigid tire**
Breakout force
Operating weight
m3
yd3
m3
yd3
mm
ft/in
kg/m3
lb/yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
2.5
3.3
2.3
3.0
2750
9'0"
1998
3,337
2869
9'4"
1108
3'7"
1637
5'4"
2452
8'0"
100
3.9"
7604
24'11"
5242
17'2"
6117
20'0"
11 707
25,801
12 194
26,876
9991
22,021
10 629
23,426
13 813
30,442
15 523
34,212
2.7
3.5
2.5
3.3
2750
9'0"
1834
3,118
2822
9'3"
1146
3'9"
1652
5'5"
2514
8'2"
100
3.9"
7666
25'1"
5301
17'4"
6136
20'1"
11 610
25,588
12 094
26,654
9903
21,825
10 535
23,218
13 082
28,833
15 568
34,311
2.9
3.8
2.7
3.5
2750
9'0"
1694
2,850
2786
9'1"
1178
3'10"
1664
5'5"
2563
8'4"
100
3.9"
7715
25'3"
5348
17'6"
6150
20'2"
11 529
25,408
12 009
26,467
9828
21,661
10 455
23,043
12 552
27,665
15 604
34,392
2.5
3.3
2.3
3.0
2750
9'0"
1905
3,181
2834
9'3"
1146
3'9"
1658
5'5"
2504
8'2"
101
4"
7656
25'1"
5273
17'3"
6133
20'1"
11 209
24,704
11 676
25,734
9527
20,997
10 135
22,337
13 170
29,027
15 928
35,104
2.7
3.5
2.5
3.3
2750
9'0"
1748
2,972
2787
9'1"
1185
3'10"
1672
5'5"
2566
8'5"
101
4"
7718
25'3"
5332
17'5"
6152
20'2"
11 113
24,493
11 576
25,514
9439
20,803
10 042
22,131
12 498
27,546
15 972
35,202
ISO 23727
2.9
3.8
2.7
3.5
2750
9'0"
1615
2,716
2751
9'0"
1216
3'11"
1684
5'6"
2615
8'6"
101
4"
7767
25'5"
5379
17'7"
6166
20'2"
11 035
24,320
11 494
25,333
9367
20,645
9965
21,963
12 009
26,467
16 008
35,281
2.7
3.5
2.6
3.4
2750
9'0"
1696
2,883
2712
8'10"
1280
4'2"
1726
5'7"
2687
8'9"
93
3.7"
7833
25'8"
5415
17'9"
6169
20'2"
10 775
23,748
11 224
24,737
9156
20,180
9741
21,468
11 299
24,902
15 858
34,950
2.9
3.8
2.7
3.5
2750
9'0"
1567
2,636
2675
8'9"
1311
4'3"
1735
5'8"
2736
8'11"
93
3.7"
7882
25'10"
5462
17'11"
6185
20'3"
10 702
23,587
11 148
24,570
9089
20,033
9670
21,311
10 887
23,993
15 892
35,025
*Full compliance to ISO 14397-1 (2007) Sections 1 through 6, which requires 2% verification between calculation and testing.
**Compliance to ISO 14397-1 (2007) Sections 1 through 5.
Dimensions listed are for a 938K configured with bucket, bolt-on cutting edge, heavy counterweights, additional guarding, 80 kg (176 lb)
operator, and Michelin 20.5 R25 (L-3) XHA2 tires at a pressure of 4.48 bar (65 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
24
938K Operating Specifications with Buckets
Light Material
Pin On
Rated capacity
Struck capacity
Width: bucket
Nominal material density, 100% fill factor
Clearance: full lift, 45° dump
Reach: full lift, 45° dump
Reach: 2130 mm (7'0") clearance, 45° dump
Reach: level arm, level bucket
Dig depth
Length: overall
Height: overall
Turning radius, bucket at carry
Tipping load – straight, ISO 14397-1*
Tipping load – straight, rigid tire**
Tipping load – full turn, ISO 14397-1*
Tipping load – full turn, rigid tire**
Breakout force
Operating weight
m3
yd3
m3
yd3
mm
ft/in
kg/m3
lb/yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
3.5
4.6
3.3
4.3
2750
9'0"
1378
2311
2691
8'9"
1174
3'10"
1608
5'3"
2642
8'8"
100
3.9"
7794
25'6"
5346
17'6"
6174
20'3"
11 332
24,975
11 804
26,016
9646
21,259
10 262
22,616
11 750
25,897
15 730
34,668
4.2
5.5
4.0
5.2
2750
9'0"
1114
1,875
2571
8'5"
1294
4'2"
1654
5'5"
2812
9'2"
100
3.9"
7964
26'1"
5507
18'0"
6227
20'5"
11 018
24,282
11 477
25,294
9359
20,626
9956
21,943
10 331
22,768
15 869
34,975
High Lift
Fusion
5.0
6.5
4.8
6.3
2750
9'0"
934
1,583
2571
8'5"
1294
4'2"
1654
5'5"
2812
9'2"
100
3.9"
7964
26'1"
5786
18'11"
6227
20'5"
11 001
24,247
11 460
25,257
9340
20,584
9936
21,898
10 281
22,659
15 937
35,124
3.5
4.6
3.3
4.3
2750
9'0"
1313
2202
2654
8'8"
1210
3'11"
1622
5'3"
2694
8'10"
101
4"
7846
25'8"
5376
17'7"
6190
20'3"
10 847
23,907
11 299
24,903
9194
20,262
9780
21,556
11 263
24,822
16 131
35,551
4.2
5.5
4.0
5.2
2750
9'0"
1062
1,787
2534
8'3"
1331
4'4"
1666
5'5"
2864
9'4"
101
4"
8016
26'3"
5539
18'2"
6244
20'5"
10 549
23,249
10 988
24,217
8921
19,662
9491
20,917
9936
21,899
16 270
35,859
5.0
6.5
4.8
6.3
2750
9'0"
890
1,508
2534
8'3"
1331
4'4"
1666
5'5"
2864
9'4"
101
4"
8016
26'3"
5820
19'1"
6244
20'5"
10 526
23,198
10 964
24,164
8895
19,605
9463
20,856
9888
21,792
16 335
36,002
–
–
–
–
–
–
–
–
+581
+1'10"
+267
+11"
+666
+2'2"
+607
+1'11"
+35
+1.4"
+740
+2'5"
+581
+1'10"
+357
+1'2"
–3003
–6,618
–3128
–6,893
–2625
–5,785
–2793
–6,154
–502
–1,106
+249
+549
*Full compliance to ISO 14397-1 (2007) Sections 1 through 6, which requires 2% verification between calculation and testing.
**Compliance to ISO 14397-1 (2007) Sections 1 through 5.
Dimensions listed are for a 938K configured with bucket, bolt-on cutting edge, heavy counterweights, additional guarding, 80 kg (176 lb)
operator, and Michelin 20.5 R25 (L-3) XHA2 tires at a pressure of 4.48 bar (65 psi) in the front tires and 2.76 bar (40 psi) in the rear tires.
25
Bucket Specifications
938K Bucket Selection Table
m3
2.5
2.7
2.9
2.5
2.7
2.9
kg/m3 1375
lb/yd3 2,317
yd3
3.3
3.5
3.8
3.3
3.5
3.8
m3
3.5
4.2
5.0
3.5
4.2
5.0
kg/m3 800
850
lb/yd3 1,348 1,432
yd3
4.6
5.5
6.5
110%
4.6
5.5
6.5
111% 105%
General
Purpose
Bucket Fill Factor
Pin On
Fusion
Light Material
Bucket Fill Factor
Pin On
Fusion
1450
2,443
111%
1525
2,570
1600
2,696
1675
2,822
111%
115%
106%
115%
106%
109%
101%
109%
101%
114%
104%
96%
900
1,517
950
1,601
1000
1,685
1750
2,949
1825
3,075
1900
3,202
1975
3,328
114%
105%
97%
109%
100%
109%
100%
105%
97%
101%
104%
96%
100%
96%
1050
1,769
1100
1,854
1150
1,938
1250
2,106
2050
3,454
97%
94%
1350
2,275
1450
2,443
110% 102%
104%
111%
106%
101%
106%
101%
97%
97%
98%
114%
112%
99%
105%
2125
3,581
97%
95%
High Lift
kg/m3 lb/yd3
–529 –891
–486 –819
–450 –758
–519 –874
–477 –804
–441 –744
High Lift
kg/m3 lb/yd3
–369 –621
–300 –506
–254 –427
–362 –610
–295 –497
–249 –420
Material density and fill factor are key variables when choosing the appropriate size of the bucket. The long floor and open throat design
of the Performance Series Buckets along with the aggressive rack angles of the optimized K Series linkage will demonstrate fill factors greater
than 100% ISO rated. Refer to the Fill Factors table for expected fill factor per material density and Bucket Selection Table for bucket sizing.
938K Fill Factors
Materials
Earth and rock
Sand and gravel
Aggregates
Bulk grains
Woodchips
Density
3
~ 1800 kg/m
~ 1700 kg/m3
~ 1600 kg/m3
~ 750 kg/m3
~ 500 kg/m3
3
~ 3,033 lb/yd
~ 2,865 lb/yd3
~ 2,696 lb/yd3
~ 1,264 lb/yd3
~ 843 lb/yd3
Fill %
~ 115%
~ 110%
~ 105%
~ 100%
~ 100%
938K Ground Engagement Options
Dig depth
Length: overall
Dump clearance
Reach
Tipping load – straight
Tipping load – full turn
Breakout force
Operating weight
26
Long Teeth and Segments
+11 mm
+0.4 in
+146 mm
+5.7 in
–105 mm
–4.1 in
+102 mm
+4 in
–138 kg
–305 lb
–136 kg
–298 lb
–112 kg
–245 lb
+111 kg
+244 lb
Short Teeth and Segments
+5 mm
+0.2 in
+121 mm
+4.8 in
–84 mm
–3.3 in
+87 mm
+3.4 in
–132 kg
–291 lb
–130 kg
–285 lb
–106 kg
–234 lb
+106 kg
+233 lb
Operating Specifications
Operating Specifications with Pallet Forks
7
12
2
6
10
9
1
4
11
8
5
13
3
Pallet Fork – Fusion
1 Fork tine length
2 Load center
3 Length: overall
4 Reach: ground
5 Dig depth
6 Reach: level arm
924K
1220 mm
4'0"
930K
1220 mm
4'0"
938K
1220 mm
610 mm
2'0"
610 mm
2'0"
610 mm
7875 mm
2'0"
25'10"
7882 mm
25'10"
7942 mm
26'0"
926 mm
3'0"
926 mm
3'0"
961 mm
3'1"
47 mm
1.9"
47 mm
1.9"
44 mm
1.7"
1569 mm
4'0"
5'1"
1569 mm
5'1"
1617 mm
5'3"
7 Reach: full lift
8 Clearance: level arm
767 mm
2'6"
767 mm
2'6"
814 mm
2'8"
1792 mm
5'10"
1792 mm
5'10"
1830 mm
6'0"
9 Clearance: full lift
3693 mm
12'1"
3693 mm
12'1"
3758 mm
12'3"
4676 mm
15'4"
4676 mm
15'4"
4740 mm
15'6"
6650 kg
5729 kg
12 577 kg
14,657 lb
12,626 lb
27,719 lb
7586 kg
6502 kg
13 494 kg
16,720 lb
14,330 lb
29,741 lb
8811 kg
7530 kg
15 432 kg
19,420 lb
16,595 lb
34,012 lb
2864 kg
6,313 lb
3251 kg
7,165 lb
3765 kg
8,297 lb
3437 kg
7,575 lb
3901 kg
8,598 lb
4518 kg
9,957 lb
13,276 lb
10 Height: overall
Tipping load – straight, ISO 14397-1*
Tipping load – full turn, ISO 14397-1*
Operating weight
Rated load % of full turn tip:
50% of tip: SAE J1197**
60% of tip: rough terrain EN474-3**
4583 kg
10,100 lb
5202 kg
11,464 lb
6024 kg
11 Minimum fork spacing
12 Carriage width
80% of tip: firm and level EN474-3**
300 mm
11"
300 mm
11"
300 mm
11"
1566 mm
5'1"
1566 mm
5'1"
1566 mm
5'1"
13 Maximum fork spacing
1550 mm
5'1"
1550 mm
5'1"
1550 mm
5'1"
*Full compliance to ISO 14397-1 (2007) Sections 1 through 6, which requires 2% verification between calculation and testing.
**Full compliance to EN474-3 and SAE J1197.
Dimensions listed are for a machine configured with Fusion work tool, counterweights, additional guarding, 80 kg (176 lb) operator,
and Michelin 20.5 R25 (L-3) XHA2 tires.
27
Operating Specifications
Operating Specifications with Construction Forks
7
12
2
6
10
9
1
4
11
8
13
5
3
Construction Fork – Fusion
1 Fork tine length
2 Load center
3 Length: overall
4 Reach: ground
924K
1524 mm
762 mm
8298 mm
5'0"
930K
1524 mm
5'0"
938K
1524 mm
2'6"
762 mm
2'6"
762 mm
2'6"
27'2"
8305 mm
27'2"
8366 mm
27'5"
5'0"
1045 mm
3'5"
1045 mm
3'5"
1081 mm
3'6"
5 Dig depth
6 Reach: level arm
–120 mm
–4.7"
–120 mm
–4.7"
–119 mm
–4.7"
1627 mm
5'4"
1627 mm
5'4"
1675 mm
5'5"
7 Reach: full lift
8 Clearance: level arm
825 mm
2'8"
825 mm
2'8"
872 mm
2'10"
1729 mm
5'8"
1729 mm
5'8"
1766 mm
5'9"
9 Clearance: full lift
3630 mm
11'10"
3630 mm
11'10"
3693 mm
12'1"
4935 mm
16'2"
4935 mm
16'2"
0 mm
0"
5951 kg
5096 kg
12 911 kg
13,115 lb
11,231 lb
28,456 lb
6824 kg
5817 kg
13 829 kg
15,039 lb
12,821 lb
30,478 lb
7973 kg
6781 kg
15 767 kg
17,571 lb
14,945 lb
34,749 lb
2548 kg
5,615 lb
2909 kg
6,410 lb
3391 kg
7,472 lb
3058 kg
6,738 lb
3490 kg
7,692 lb
4069 kg
8,967 lb
11,956 lb
10 Height: overall
Tipping load – straight, ISO 14397-1*
Tipping load – full turn, ISO 14397-1*
Operating weight
Rated load % of full turn tip:
50% of tip: SAE J1197**
60% of tip: rough terrain EN474-3**
4077 kg
8,985 lb
4654 kg
10,256 lb
5425 kg
11 Minimum fork spacing
12 Carriage width
80% of tip: firm and level EN474-3**
300 mm
11"
300 mm
11"
300 mm
11"
2498 mm
8'2"
2498 mm
8'2"
2498 mm
8'2"
13 Maximum fork spacing
2375 mm
7'9"
2375 mm
7'9"
2375 mm
7'9"
*Full compliance to ISO 14397-1 (2007) Sections 1 through 6, which requires 2% verification between calculation and testing.
**Full compliance to EN474-3 and SAE J1197.
Dimensions listed are for a machine configured with Fusion work tool, counterweights, additional guarding, 80 kg (176 lb) operator,
and Michelin 20.5 R25 (L-3) XHA2 tires.
28
Operating Specifications with Material Handling Arm
4
3
2
1
8
7
6
5
9
10
13
11
12
22
19
18
20
21
14
15
16
17
Material Handling Arm – Fusion
1
924K
2113 mm
6'11"
930K
2113 mm
6'11"
938K
2144 mm
7'0"
12
924K
5327 mm
17'5"
930K
5327 mm
17'5"
938K
5376 mm
17'7"
2
2333 mm
7'7"
2333 mm
7'7"
2362 mm
7'8"
13
3
2919 mm
9'6"
2919 mm
9'6"
2943 mm
1854 mm
6'0"
1854 mm
6'0"
1890 mm
6'2"
9'7"
14
863 mm
2'9"
863 mm
2'9"
906 mm
2'11"
4
3505 mm
11'6"
3505 mm
11'6"
5
5257 mm
17'2"
5257 mm
17'2"
3525 mm
11'6"
15
1045 mm
3'5"
1045 mm
3'5"
1089 mm
3'6"
5343 mm
17'6"
16
1276 mm
4'2"
1276 mm
4'2"
1324 mm
4'4"
6
5568 mm
18'3"
5568 mm
7
6112 mm
20'0"
6112 mm
18'3"
5655 mm
18'6"
17
1507 mm
4'11"
1507 mm
4'11"
1559 mm
5'1"
20'0"
6204 mm
20'4"
18
1975 mm
6'5"
1975 mm
6'5"
1983 mm
8
6657 mm
21'10"
6'6"
6657 mm
21'10"
6754 mm
22'1"
19
2310 mm
7'6"
2310 mm
7'6"
2316 mm
7'7"
10'1"
9
3354 mm
11'0"
3354 mm
11'0"
3403 mm
11'1"
20
3076 mm
10'1"
3076 mm
10'1"
3081 mm
10
3727 mm
12'2"
3727 mm
12'2"
3775 mm
12'4"
21
3842 mm
12'7"
3842 mm
12'7"
3846 mm
12'7"
11
4527 mm
14'10"
4527 mm
14'10"
4575 mm
15'0"
22
5730 mm
18'9"
5737 mm
18'9"
5762 mm
18'10"
Operating weight
Rated load (50% of full turn tip, SAE J1197*)
Fixed tab (9)
Minimum extension (10)
Middle extension (11)
Maximum extension (12)
12 444 kg
27,426 lb
13 361 kg
29,447 lb
15 244 kg
33,597 lb
2053 kg
1882 kg
1597 kg
1386 kg
4,525 lb
4,148 lb
3,518 lb
3,055 lb
2329 kg
2135 kg
1811 kg
1572 kg
5,133 lb
4,705 lb
3,991 lb
3,465 lb
2705 kg
2482 kg
2109 kg
1833 kg
5,962 lb
5,470 lb
4,647 lb
4,040 lb
*Full compliance to EN474-3 and SAE J1197.
29
Operating Specifications
Operating Specifications with High Dump Buckets
Pin On
Rated capacity
Struck capacity
Bucket width
Nominal material density,
100% fill factor
1 Length: overall
2 Dump clearance: full lift,
rolled out
3 Clearance: level bucket
4 Height: overall
5 Reach: full lift, rolled out
6 Dig depth
Turning radius, bucket
at carry
7 Maximum dump angle
8 Rack angle at carry
Tipping load – straight,
ISO 14397-1*
Tipping load – straight,
rigid tire**
Tipping load – full turn,
ISO 14397-1*
Tipping load – full turn,
rigid tire**
Breakout force
Operating weight
m3
yd3
m3
yd3
mm
ft/in
kg/m3
lb/yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
deg
deg
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
Fusion
ISO 23727
High Lift
924K
930K
938K
924K
930K
938K
924K
930K
938K
924K
930K
938K
3.0
3.9
2.9
3.8
2550
8'4"
1050
1,780
7948
26'0"
4255
13'11"
4598
15'1"
6184
20'3"
1451
4'9"
100
3.9"
6096
19'11"
52
43
7408
16,326
7716
17,006
6299
13,882
6701
14,768
6509
14,346
13 258
29,220
3.5
4.6
3.3
4.3
2550
8'4"
1015
1,702
8005
26'3"
4216
13'9"
4598
15'1"
6226
20'5"
1482
4'10"
100
3.9"
6113
20'0"
52
43
8405
18,525
8755
19,296
7107
15,662
7560
16,662
8225
18,128
14 281
31,474
4.1
5.4
3.9
5.1
2750
9'0"
1006
1,684
8107
26'7"
4248
13'11"
4668
15'3"
6295
20'7"
1548
5'0"
101
4"
6293
20'7"
51
43
9792
21,582
10 200
22,481
8253
18,189
8780
19,350
9066
19,980
16 252
35,820
3.0
3.9
2.9
3.8
2550
8'4"
1020
1,730
7979
26'2"
4328
14'2"
4662
15'3"
6248
20'5"
1453
4'9"
100
3.9"
6087
19'11"
49
45
7235
15,945
7536
16,609
6122
13,492
6513
14,353
6420
14,149
13 602
29,978
3.5
4.6
3.3
4.3
2550
8'4"
992
1,663
8036
26'4"
4291
14'0"
4662
15'3"
6290
20'7"
1486
4'10"
100
3.9"
6104
20'0"
49
45
8246
18,175
8590
18,932
6941
15,299
7385
16,275
8126
17,909
14 625
32,232
4.1
5.4
3.9
5.1
2750
9'0"
976
1,634
8149
26'8"
4333
14'2"
4740
15'6"
6367
20'10"
1559
5'1"
101
4"
6286
20'7"
49
45
9545
21,036
9942
21,912
8007
17,647
8518
18,774
8895
19,604
16 648
36,691
3.0
3.9
2.9
3.8
2550
8'4"
980
1,662
8145
26'8"
4496
14'9"
4825
15'9"
6411
21'0"
1538
5'0"
92
3.6"
6118
20'0"
48
43
6957
15,332
7247
15,971
5883
12,965
6258
13,793
5657
12,467
13 540
29,842
3.5
4.6
3.3
4.3
2550
8'4"
953
1,598
8202
26'10"
4459
14'7"
4825
15'9"
6453
21'2"
1571
5'1"
92
3.6"
6136
20'1"
48
43
7932
17,481
8262
18,210
6672
14,705
7098
15,644
7220
15,913
14 564
32,098
4.1
5.4
3.9
5.1
2750
9'0"
947
1,585
8305
27'2"
4494
14'8"
4895
16'0"
6523
21'4"
1637
5'4"
92
3.6"
6315
20'8"
50
43
9257
20,401
9642
21,251
7766
17,115
8262
18,208
7988
17,605
16 537
36,448
–
–
–
–
–
–
–
–
+642
+2'1"
+439
+1'5"
+448
+1'5"
+448
+1'5"
+252
+9"
+35
+1.4"
+333
+1'1"
–
–
–1830
–4,032
–1906
–4,200
–1617
–3,562
–1720
–3,790
–374
–824
+299
+659
–
–
–
–
–
–
–
–
+793
+2'7"
+567
+1'10"
+572
+1'10"
+572
+1'10"
+327
+1'0"
+35
+1.4"
+405
+1'3"
–
–
–2376
–5,235
–2474
–5,453
–2088
–4,601
–2221
–4,895
–225
–496
+247
+544
–
–
–
–
–
–
–
–
+740
+2'5"
+545
+1'9"
+553
+1'9"
+553
+1'9"
+275
+10"
+35
+1.4"
+378
+1'2"
–
–
–2571
–5,666
–2678
–5,902
–2250
–4,959
–2394
–5,275
–393
–865
+249
+549
*Full compliance to ISO 14397-1 (2007) Sections 1 through 6, which requires 2% verification between calculation and testing.
**Compliance to ISO 14397-1 (2007) Sections 1 through 5.
Dimensions listed are for a machine configured with rollout bucket, counterweights, additional guarding, 80 kg (176 lb) operator,
and Michelin 20.5 R25 (L-3) XHA2 tires.
30
7
4
5
3
2
8
6
1
Bucket Selection Table for High Dump Buckets
m3
3.0
3.5
4.1
3.0
3.5
4.1
4.1
kg/m3
lb/yd3
yd3
3.9
4.6
5.4
3.9
4.6
5.4
5.4
3.0
3.5
4.1
3.0
3.5
4.1
3.0
3.5
4.1
3.9
4.6
5.4
3.9
4.6
5.4
3.9
4.6
5.4
Bucket Fill Factor
Pin On
924K
930K
938K
Fusion
924K
930K
938K
650
1,095
112%
725
1,222
800
1,348
875
1,474
950
1,601
1025
1,727
109%
101%
1100
1,854
109%
100%
106%
98%
105%
115%
96%
114%
105%
97%
106%
98%
106%
115%
97%
99%
103%
113%
96%
106%
103%
112%
94%
106%
99%
103%
113%
95%
1250
2,106
1325
2,233
1400
2,359
101%
95%
98%
113%
110%
111%
High Lift
kg/m3 lb/yd3
–265 –447
–226 –380
–191 –322
–345 –582
–293 –494
–248 –418
–269 –452
100%
108%
109%
1175
1,980
103%
98%
–271
–231
–196
–353
–300
–254
–380
–324
–274
–457
–390
–330
–594
–506
–428
–640
–545
–462
31
Operating Specifications
Operating Specifications with Multi-Purpose Bucket
12
8
10
7
9
6
11
5
31
32
4
3
Multi Purpose – Fusion
Rated capacity
Struck capacity
1 Length – dozer edge to bumper
2 Length: overall – closed clam
3 Length: overall – open clam
924K
2.7 yd3
2.1 m3
2.0 m3
2.6 yd3
6744 mm
22'1"
930K
2.1 m3
2.7 yd3
2.0 m3
2.6 yd3
6751 mm
22'1"
938K
2.1 m3
2.7 yd3
2.0 m3
2.6 yd3
6815 mm
22'4"
7455 mm
24'5"
7462 mm
24'5"
7525 mm
24'8"
8104 mm
26'9"
26'7"
8111 mm
26'7"
8175 mm
4 Dig depth
5 Clearance: full lift, 45° dump
100 mm
3"
100 mm
3"
101 mm
3"
2962 mm
9'8"
2962 mm
9'8"
3017 mm
9'10"
6 Clearance: full lift – open clam
7 Height: overall
3577 mm
11'8"
3577 mm
11'8"
3638 mm
11'11"
5791 mm
18'11"
5791 mm
18'11"
5864 mm
19'2"
8 Reach: full lift – open clam
9 Reach: full lift, 45° dump
809 mm
2'7"
809 mm
2'7"
857 mm
2'9"
1130 mm
3'8"
1130 mm
3'8"
1176 mm
3'10"
10 Maximum dump angle
11 Rack angle at carry
56°
56°
45°
56°
45°
45°
12 Clam open distance
13 Bucket width
995 mm
3'3"
995 mm
3'3"
995 mm
3'3"
2550 mm
8'4"
2550 mm
8'4"
2550 mm
8'4"
Turning radius – bucket at carry
Tipping load – straight, ISO 14397-1*
Tipping load – full turn, ISO 14397-1*
Breakout force
Operating weight
5925 mm
8071 kg
6860 kg
9870 kg
13 409 kg
19'5"
17,787 lb
15,119 lb
21,752 lb
29,554 lb
5925 mm
9317 kg
7890 kg
12 864 kg
14 326 kg
19'5"
20,534 lb
17,388 lb
28,352 lb
31,575 lb
6004 mm
10 920 kg
9234 kg
14 567 kg
16 209 kg
19'8"
24,068 lb
20,351 lb
32,105 lb
35,724 lb
*Full compliance to ISO 14397-1 (2007) Sections 1 through 6, which requires 2% verification between calculation and testing.
Dimensions listed are for a machine configured with Fusion work tool, counterweights, additional guarding, 80 kg (176 lb) operator,
and Michelin 20.5 R25 (L-3) XHA2 tires.
32
Supplemental Specifications
Optional Equipment
924K
Operating
weight
Change with options removed:
Optional counterweight
Guard, crankcase
Guard, power train lower
Guard, driveshaft
Roading fenders
Secondary steer
Ride control
Change with options added:
Guard, front window
Guard, rear waste gate
Guard, power train side
Cold start package
Optional tool box
Logger counterweight
930K
Tipping load –
full turn with
1.9 m3 (2.5 yd3)
Fusion bucket
Operating
weight
938K
Tipping load –
full turn with
2.1 m3 (2.75 yd3)
Fusion bucket
Operating
weight
Tipping load –
full turn with
2.5 m3 (3.25 yd3)
Fusion bucket
kg
0
–11
–77
–44
–18
–69
–49
lb
0
–23
–170
–96
–38
–151
–107
kg
0
–16
–77
–12
–28
–75
–27
lb
0
–34
–168
–26
–61
–164
–59
kg
–320
–11
–77
–44
–18
–69
–49
lb
–705
–23
–170
–96
–38
–151
–107
kg
–502
–13
–69
–12
–24
–73
–26
lb
–1,106
–29
–151
–26
–52
–161
–57
kg
–320
–11
–68
–45
–18
–69
–49
lb
–705
–24
–150
–100
–38
–151
–107
kg
–593
–17
–67
–12
–28
–74
–27
lb
–1,306
–36
–146
–27
–60
–162
–59
+34
+276
+11
+54
+44
+400
+74
+608
+24
+119
+96
+881
+17
+596
+10
+104
+37
+661
+37
+1,313
+22
+229
+81
+1,456
+34
+276
+11
+54
+44
+400
+74
+608
+24
+119
+96
+881
+18
+488
+9
+74
+25
+557
+39
+1,075
+19
+163
+55
+1,227
+34
+276
+11
+54
+44
+400
+74
+608
+24
+119
+96
+881
+18
+581
+10
+101
+36
+645
+39
+1,280
+22
+222
+79
+1,421
33
924K, 930K, 938K Standard Equipment
Standard equipment may vary. Consult your Cat dealer for details.
POWER TRAIN
• Axle seal guards
• Auto idle shut down feature
• Brake/decelerator pedal
• Cat C6.6 ACERT™ engine
– Tier 4 Interim/Stage IIIB compliant
– Turbocharged and aftercooled
– Filtered crankcase breather
– Diesel particulate filter
• Coolant protection to –34° C (–29° F)
• Differential lock in front axle
• Differential rear open
• Dry type air cleaner
• Enclosed wet disc full hydraulic brakes
• Fuel priming pump, automatic
• Fuel water separator
• Hydraulically driven demand cooling fan
• Hydrostatic transmission with electronic speed range control
– 4 speed ranges
– Rimpull control
– Creeper control
• Lubed for life driveshafts
• Parking brake, electric
• Single plane cooling system with remote coolant reservoir
• S·O·SSM port, engine, coolant and transmission oil
• Thermal starting aid (glow plugs)
• Throttle lock
• Transmission directional control on implement joystick
• Transmission sight gauge
• Transmission oil cooler (938K only)
HYDRAULICS
• Heavy duty hydraulic cooler
• Hydraulic diagnostic connectors and S·O·SSM ports
• Hydraulic sight gauge, visible
• Load sensing hydraulics and steering
• Seat-mounted hydraulic controls with F/N/R
ELECTRICAL
• Alternator, 115-amp, heavy duty
• 12V power supply in cab (2)
• Batteries, 1,000 CCA (2)
• 24 volt system
• Back-up alarm
• Battery disconnect switch
• Beacon ready
• Diagnostic connector
• Directional signals front and rear
• Emergency shutdown switch
• Halogen work lights front and rear
• Heavy duty gear reduction starter
• LED rear stop tail turn lights
• Remote jump start post
• Resettable main and critical function breakers
• Roading lights front and rear
OPERATOR ENVIRONMENT
• 75 mm (3 in) retractable seatbelt
• Automatic temperature control
• Cab, enclosed ROPS/FOPS pressurized and sound suppressed
• Cup holder
• External heated mirrors
• Ground level cab door release
• Gauges
– Digital direction indicator
– Digital hour meter and odometer
– Digital speedometer
– Engine coolant temperature gauge
– Fuel level indicator
– Hydraulic oil temperature gauge
– Tachometer
• Hydraulic control lockout
• Interior cab lighting, door and dome
• Interior rearview mirrors (2)
• Lunch box storage
• Operator warning system indicators
• Radio ready speakers
• Rear window defrost, electric
• Removable floormat
• Seat-mounted electronic implement controls, adjustable
• Sliding glass on the side windows
• Steering column mounted multi function control – lights, wipers,
turn signal
• Suspension seat, fabric
• Tilt and telescopic steering wheel
• Tinted front glass
• Wet arm wiper/washer, 2-speed and intermittent, front
• Wet arm wiper/washer, rear
OTHER STANDARD EQUIPMENT
• Automatic bucket/fork positioner, adjustable in-cab
• Automatic lift and bucket kickouts, adjustable in-cab
• Fenders
• Large-access enclosure doors with adjustable close/open force
• Parallel lift loader linkage with sealed pins
• Recovery hitch with pin
• Remote mounted lubrication points
• Toolbox, lockable
• Vandalism protection – lockable compartments
EU STANDARD EQUIPMENT
• Deluxe cab
• Secondary display
• Rearview camera
NOTE: Not all features are available in all regions. See your Cat dealer for more information.
34
924K, 930K, 938K Optional Equipment
Optional equipment may vary. Consult your Cat dealer for details.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Antifreeze/coolant, extended-life, protects to –50° C (–58° F)
Axles, differential, limited slip, rear
Beacon light, rotating or strobe
Cab, deluxe includes
(standard in Europe, optional in North America):
– Automatic blower control
– Electrically adjustable external heated mirrors (2)
– LED interior lighting
– Secondary display
– Sunscreen
– Visor
Camera, rearview (standard in Europe)
Cold start package:
– Ether starting aid
– Block heater
– Additional batteries (2)
Counterweight, heavy
Counterweight, logger
Coupler, Fusion
Coupler, ISO 23727
Coupler, jumper lines, third function
Debris package
Debris package – cleaning arrangement
Fenders, roading
Fenders, full coverage
Guards
– Power train, lower
– Power train, side
– Crankcase
– Driveshaft
– Windshield
•
•
•
•
•
•
•
•
•
•
•
•
•
Hydraulic control auxiliary, third and fourth function
Jumper lines, third function
Linkage, high lift
Lights, auxiliary, halogen or HID
Machine Security System
Product Link
Radio packages:
– Radio ready with Bluetooth interface, microphone and auxiliary inputs for MP3 players
– Radio, AM/FM with CD player
– Radio, AM/FM with CD player deluxe, Bluetooth interface, microphone and auxiliary inputs for MP3 players
Ride Control System
Seats:
– Deluxe seat – fully adjustable fabric air suspension seat with high seat backrest
– Premium seat – fully adjustable heated fabric air suspension seat
with high seat backrest and lumbar support. Seat is heated and
ventilated on bottom cushion and backrest.
Steering:
– Dual mode
– Secondary
Tires:
– Bias ply, 20.5-25
– Radial, 17.5 R25, 20.5 R25, 550/65 R25, 650/65 R25
– Flexport
– Skidder/Agriculture
Toolbox, additional
Work tools
NOTE: Not all features are available in all regions. See your Cat dealer for more information.
35
924K, 930K, 938K Wheel Loaders
For more complete information on Cat products, dealer services, and industry solutions,
visit us on the web at www.cat.com
© 2012 Caterpillar Inc.
All rights reserved
Materials and specifications are subject to change without notice. Featured machines
in photos may include additional equipment. See your Cat dealer for available options.
CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow”
and the “Power Edge” trade dress, as well as corporate and product identity used herein,
are trademarks of Caterpillar and may not be used without permission.
20
AEHQ6699-01 (10-2012)
Replaces AEHQ6699