Fresh Grass
Polethylene Monofilament
Classic Spine
Texturized Polethylene
PROPERTY
DESCRIPTION
Primary/Stalk Yarn Polymer
Polyethylene
Secondary/Thatch Yarn Polymer
Polyethylene
Yarn Cross Section
Polyethylene Monofilament Classic Spine/
Texturized Polyethylene
Standard Color
Field/Olive/Tan
PL919
PRESSURE TREATED 2X4 ANCHOR TO
CONCRETE CURB W/ 1/2"Ø STAINLESS
STEEL EXPANSION ANCHORS
SLOPE SUBGRADE @ .5%
TOWARDS COLLECTOR TRENCH
GEOTEXTILE FABRIC,
COVER ENTIRE SUBGRADE
PANEL DRAIN
INFILLED SYNTHETIC
TURF SYSTEM
2" DEPTH 1/4"-3/8"
CLEAN AGGREGATE
RESILIENT SURFACING
ASPHALT
4" DEPTH 3/4" TURF
AGGREGATE
8" FLYASH UNDER
TURF GRAVEL
16" FLYASH UNDER
ASPHALT
Yes
Fabric Construction
Tufted
Primary Backing
Dual Layered Woven Polypropylene
Coating Type
SilverBack™ Polyurethane
Perforations
Yes
FOUNDATION GRADE LUMBER OR
RECYCLED PLASTIC. ATTACH WITH
S.S CONCRET SCREWS & WASHERS
@ 18" O.C.
Polyethylene Yarn Denier/Ends
1500/6
THOROUGHLY COMPACTED
MATERIAL AT EDGE
Texturized Polyethylene Denier/Ends (Thatch)
5000/9
9"
MIN.
UV Stabilized
6" X 12" CONC. CURB W/
TWO #4 REBAR
6"
6"
COMPACTED SUBGRADE
9" PERFORATED COLLECTOR
MIN. MIN.
SUB-DRAIN
INSTALL FILTER FABRIC BELOW AGGREGATE BASE
COURSE AND AT BOTTOM & SIDES OF TRENCH
CURB
EXISTING EQUIPMENT
INFILLED SYNTHETIC TURF SYSTEM
FREE DRAINING FINISHING STONE,
LASER GRADE ONLY
FREE DRAINING BASE STONE
Recommended Infill
2-3 lbs. Silica Sand
GEOTEXTILE FABRIC
COMPACTED SUBGRADE
Pile Height
1 ½”
Pile Weight
40 oz.
EQUIPMENT
APPLICATION
This is an excellent landscape product that offers thatch, which provides added body, reducing the amount of
infill needed. The four color blend of this surface provides a truly authentic look and feel that resembles a
natural lawn. This product can be used for landscapes, pet areas, fringes, and much more. This product can
be installed indoors or outdoors on concrete or a compacted aggregate base.
™
*Custom colors available upon request
200 Howell Dr. Dalton GA 30721
www.sporturf.com
800.798.1056
TESTING
FINISHED FABRIC
FRESH GRASS PL919
ENGLISH SYSTEM
METRIC SYSTEM
ASTM TEST
Nominal Specification
Value
Units
Value
Units
Method
Pile Height (Nominal)
1.5
In.
38.10
mm.
D-5823
Face Weight
40
oz/yd2
1,356
g/m2
D-5848
Total Fabric Weight
67
oz/yd2
2,272
g/m2
D-5848
Primary Backing Weight
7.4
oz/yd2
251
g/m2
D-5848
Secondary Coating Weight
20
oz/yd2
678
g/m2
D-5848
Tuft Bind
>8
lbs.
>3.6
kg.
D-1335
>200
lbs.
>91
kg.
D-2256
<50
ppm
<50
ppm
D-2765
14,000
Denier
15,554
D-Tex
D-1577
Stitch Rate
7.75
Per 3”
10.15
Per 10 cm
D-5793
Machine Gauge
3/8
In.
.95
cm
D-5793
TEST
PASSED
TEST
PASSED
D-2859
>30
In/hr
>76
cm/hr
F-1551
15
Ft.
4.6
M
None
Grab Tear Strength (Average)
Lead Content
Total Yarn Linear Density
Flammability
Water Permeability w/Infill
Fabric Width
11/12/2014
It is the policy of SporTurf™ to continuously improve it line of products. Therefore, SporTurf™ reserves the right to change,
modify or discontinue systems, specifications and accessories of all products at any time without notice or obligation to purchaser.