CNC Surface Roughness Tester “Surftest SV–3000 CNC” CNC-controlled reference-plane measurement of surface roughness and ripple in test room and laboratory when analyzing: roughness profiles, ripple profiles and primary profiles. •With a rate of travel of 200 mm/s and a straightness deviation of (0.05 + 1.5L/1000) µm and high-end software as standard. •Control up to 6 axis. Specification Column Range of travel:300 mm (Model S8) 500 mm (Model H8) Rate of travel: 200 mm/s X-axis: 200 mm Resolution: 0,05 µm Straightness: (0,05 + 1,5 L/1000) µm Rate of travel: 200 mm/s Detector Measuring range:800 µm Resolution: max. 0,0001 µm Surftest SV–3000 CNC Contour measurer “Contracer CV-1000” Mobile contour measurement with “stationary” performance profile. •Sophisticated digital technology for site-independent identification and evaluation of profiles – with the precision and performance of stationary systems. Specification Measuring range: horizontal 50 mm vertical 25 mm Resolution: X-axis 0,2 µm Z-axis 0,4 µm Length measurement deviation:X-axis (3,5 + 0,02 L) µm Z-axis ± (3,5 + I4HI/25) µm Straightness deviation on the X-axis: 3,5 µm / 50 mm Contracer CV-1000 Model CV-1000 N2 352 Measuring range X- / Z-axis 50 / 25 mm Height adjustment optional Stativ optional Request our detailed brochure! Contour measurer “Contracer CV-2000” Specification Measuring range: horizontal 100 mm vertical 40 mm Resolution: X-axis 0,2 µm Z-axis 0,5 µm Length measurement deviation:X-axis (3,5 + 0,02 L) µm Z-axis ± (3,5 + I4HI/25) µm Straightness deviation on the X-axis: 3,5 µm / 100 mm Feed inclination: ± 45° The state of the art in economic measurement. •Stationary contour measurer with convincing price-performance ratio. For efficient use in production or in the laboratory in every respect. Contracer CV-2000 Model Measuring Height Baseplate range adjustment dimension X- / Z-axis CV-2000 M4 100 / 40 mm 320 mm manual 600 x 450 mm CV-2000 S4 100 / 40 mm 320 mm motorised 600 x 450 mm Contour measurer “Contracer CV-3100” Specification Measuring range: X-axis 100 / 200 mm Z-axis 50 mm Resolution: X-axis 0,05 µm Z-axis 0,2 µm Length measurement deviation:X-axis (1,0 + 0,1 L/100) µm Type S4, H4, W4 (1,0 + 0,2 L/100) µm Type S8, H8, W8 Z-axis ± (2,0 + I2HI/25) µm Straightness deviation on the X-axis: (1,0 + 2,0 L/100) µm Feed inclination: ± 45° Top-notch technology for automatic contour measurement. •High-performance stationary system for automatic series measurement in test room and laboratory. With motorised Z-column, ceramic straightness guide on X-axis and automatic raising and lowering of the probe tip. Contracer CV-3100 S4 Request our detailed brochure! Model CV-3100 S4 CV-3100 H4 CV-3100 W4 CV-3100 S8 CV-3100 H8 CV-3100 W8 353 Measuring Height range adjustment X- / Z-axis 100 / 50 mm 300 mm motorised 100 / 50 mm 500 mm motorised 100 / 50 mm 500 mm motorised 200 / 50 mm 300 mm motorised 200 / 50 mm 500 mm motorised 200 / 50 mm 500 mm motorised Baseplate dimension 741 x 450 mm 741 x 450 mm 1118 x 450 mm 741 x 450 mm 767 x 450 mm 1144 x 450 mm Contour measurer “Contracer CV-4100” No compromise: straightness deviation 0.8 µm. •The stationary high-end system with laser holoscale technology and sensational straightness deviation on the X-axis from just (0,8 + 0,1L/100) µm. The no-compromise, perfect solution for maximum precision automatic series measurement. Model Contracer CV-4100 CV-4100 S4 CV-4100 H4 CV-4100 W4 CV-4100 S8 CV-4100 H8 CV-4100 W8 Measuring range X- / Z-axis 100 / 50 mm 100 / 50 mm 100 / 50 mm 200 / 50 mm 200 / 50 mm 200 / 50 mm Height adjustment 300 mm motorised 500 mm motorised 500 mm motorised 300 mm motorised 500 mm motorised 500 mm motorised Baseplate dimension 741 x 450 mm 741x 450 mm 1118 x 450 mm 741 x 450 mm 767 x 450 mm 1144 x 450 mm Software FORMPAK / Formtracepak Measuring, evaluation and full documentation; with FORMPAK, the top-performance software from MITUTOYO. An added bonus with all CONTRACER systems. No extra cost and impressively versatile. For professional c ontour measurement with optimum results. CNC contour measurer “Contracer CV–3000 CNC” and “Contracer CV–4000 CNC” CNC-controlled high-performance system for contour measurement in production and laboratory. •With ceramic X-axis straightness guide, digital glass scale in the X- and Z-axis and Windows®based Formtracepak measuring and analysis software. •Control up to 6 axis. •CV-4000 CNC with Laser-Holoscale technology. Contracer CV–3000 CNC 354 Specification Measuring range: X-axis 100 / 200 mm Z-axis 50 mm Resolution: X-axis 0,05 µm Z-axis 0,05 µm Length measurement deviation: (0,8 + I0,5HI/25) µm Straightness deviation on the X-axis: (0,8 µm / 100 mm) Feed inclination: ± 45° Request our detailed brochure! Specification Column Range of travel:300 mm (Model S8) 500 mm (Model H8) Feed: 200 mm Resolution: 0,05 µm Straightness: 2 µm / 200 mm Rate of travel: 200 mm/s Probe system Measuring range Z1: 50 mm Resolution:0,2 µm (CV-3000 CNC) 0,05 µm (CV-4000 CNC) NOTE: Products in this series are equipped with a safety system to detect any shocks to the measuring system that could impair its function. If the system is activated, the device will subsequently shut down. The functionality of the device can be secured without downtimes by asking Mitutoyo‘s service personnel to release the safety system in good time. Specification Straightness deviation Contour measurement:2 µm / 200 mm Surface measurement: 0.5 µm / 200 mm Contour measurement measuring range X-axis: 200 mm Z1-Axis: 50 mm Z2-Axis: 300 / 500 mm Surface measurement measuring range X-axis: 200 mm Z-axis: 800 µm Rate of travel: 200 mm/s ombined surface and contour measurer C “Formtracer Extreme SV-C 3000 CNC” and “SV-C 4000 CNC” Dual-use, half the cost: contour and surface testing in a single test sequence. •The instruments in Mitutoyo’s Formtracer series combine surface and contour measurement technologies in one space-saving system. This ensures that both processes can be carried out even where space is limited. Formtracer Extreme SV-C 3000 CNC Model SV-C 3000 S8 SV-C 3000 H8 SV-C 4000 S8 SV-C 4000 H8 Specification CS-5000 CNC Length measurement deviation X-axis: ± (0,3 + 0,2L/100) µm Z-axis: ± (0,3 + l2Hl/100) µm Resolution: X-axis: 0,00625 µm Z-axis: up to 0,004 µm Measuring range: X-axis: 200 mm Z-axis: 12 mm / 24 mm Z-Column: 300 / 500 mm Rate of travel: CNC max. 200 mm/s Measuring range X-axis 200 mm 200 mm 200 mm 200 mm Height adjustment 300 mm motorised 500 mm motorised 300 mm motorised 500 mm motorised Baseplate dimension 610 x 450 mm 610 x 450 mm 610 x 450 mm 610 x 450 mm CNC surface and contour measurer “Formtracer CS–5000 CNC” and “CS–H5000 CNC” CNC-controlled reference-plane measurement of roughness profiles, ripple profiles, primary profiles, and contours in test room and laboratory. •Combined probe system for measuring contours and surfaces. •With a rate of travel of 200 mm/s and a straightness deviation of (0.3 + 2 L/1000) µm and high-end software Formtracepak as standard. •Laser-Holoscale in X- and Z-axis. CS-H 5000 CNC Length measurement deviation X-axis: ± (0,16 + 0,001L) µm Z-axis: ± (0,07 + l0,02Hl) µm Resolution: X-axis: 0,00625 µm Z-axis: up to 0,004 µm Measuring range: X-axis: 200 mm Z-axis: 12 mm / 24 mm Large measuring range Control unit Formtracer CS–5000 CNC Model NOTE: Products in this series are equipped with a safety system to detect any shocks to the measuring system that could impair its function. If the system is activated, the device will subsequently shut down. The functionality of the device can be secured without downtimes by asking Mitutoyo‘s service personnel to release the safety system in good time. CS-5000 CNC S8 CS-5000 CNC H8 CS-H 5000 CNC Measuring range X-axis 200 mm 200 mm 200 mm Height adjustment 300 mm motorised 500 mm motorised 300 mm motorised 355 Baseplate dimension 1000 x 450 mm 1000 x 450 mm 1000 x 450 mm
© Copyright 2024 Paperzz