Tram and Bus Antenna
406 ... 470 MHz
K702321., K702323.
Frequency range 406 – 428 MHz
Type No.
Input
Drill hole dimension
Frequency range
VSWR
Gain
Impedance
Polarization
Max. power
Weight
Packing size
(outside)
Height
Mounting
K7023210
602284
K702321
601514
K7023211
602317
M 11 x 1 female
M 11 x 1 female
N female
(the connector for cable (the connector for cable
RG 58 C/U is supplied). RG 213/U is supplied).
12 mm [0.5 inches]
12 mm [0.5 inches]
17 mm [0.7 inches]
406 – 428 MHz
406 – 410 MHz: < 1.9
410 – 425 MHz: < 1.7
425 – 428 MHz: < 1.9
0 dB (ref. to the quarter-wave antenna)
50 Ω
Vertical
50 W (at 50 °C ambient temperature)
400 g [0.9 lb]
117 x 117 x 114 mm
[4.6 x 4.6 x 4.5 inches]
70 mm [2.8 inches]
On a conductive surface 70 x 70 cm [27.6 x 27.6 inches] min.
Frequency range 440 – 470 MHz
Type No.
Input
936.067/d
Subject to alteration.
Drill hole dimension
Frequency range
VSWR
Gain
Impedance
Polarization
Max. power
Weight
Packing size
(outside)
Height
Mounting
K7023230
602285
K702323
601363
K7023231
602286
M 11 x 1 female
M 11 x 1 female
N female
(the connector for cable (the connector for cable
RG 58 C/U is supplied). RG 213/U is supplied).
12 mm [0.5 inches]
12 mm [0.5 inches]
17 mm [0.7 inches]
440 – 470 MHz
440 – 450 MHz: < 1.7
450 – 465 MHz: < 1.5
465 – 470 MHz: < 1.7
0 dB (ref. to the quarter-wave antenna)
50 Ω
Vertical
50 W (at 50 °C ambient temperature)
400 g [0.9 ib]
117 x 117 x 114 mm
[4.6 x 4.6 x 4.5 inches]
70 mm [2.8 inches]
On a conductive surface 50 x 50 cm [19.7 x 19.7 inches] min.
Material:
Radiator and base: Aluminum.
Radome: High impact plastic.
All screws and nuts: Stainless steel.
Mounting:
The drilling diameter is 12 mm except the N connector versions: 17 mm.
A special zinc washer ensures a good contact at the edges of the hole.
Special features:
All metall parts of this antenna are DC grounded.
Extreme robust and car-wash proof vehicular antenna.
Any previous data sheet issues have now become invalid.
K702321., K702323. Page 1 of 1
www.kathrein.com
KATHREIN-Werke KG · Anton-Kathrein-Straße 1-3 · P.O. Box 10 04 44 · 83004 ROSENHEIM · GERMANY · Phone +49 8031 184-0 · Fax +49 8031 184-820
Steckverbindung M 11 x 1
HF connectors M 11 x 1
K 62 05 1 /
BN 510 132
Kabel RG 058-PE
D 1. Kabel abisolieren.
2. Kabel am Steckergehäuse befestigen.
3. Innenleiter anlöten.
936.255 Subject to alteration
GB
1. Remove the insulation.
2. Fix the cable to the plug casing.
3. Solder the cable core in position.
KATHREIN-Werke KG . Telefon (0 80 31) 18 40 . Fax (0 80 31) 18 43 06
Anton-Kathrein-Straße 1 – 3 . Postfach 10 04 44 . D-83004 Rosenheim
K 62 10 0 /
BN 510 133
Kabel RG 213/U
Cable RG 213/U
Câble RG 213/U
D 1.
2.
3.
4.
1.
2.
3.
4.
Remove the insulation.
Fix the cable to the plug casing.
Solder the inner and the outer conductor in position.
Heat the strink sleeve.
936.255 Subject to alteration
GB
Kabel abisolieren.
Kabel am Steckergehäuse befestigen.
Innenleiter und Außenleiter anlöten.
Schrumpfschlauch anwärmen.
KATHREIN-Werke KG . Telefon (0 80 31) 18 40 . Fax (0 80 31) 18 43 06
Anton-Kathrein-Straße 1 – 3 . Postfach 10 04 44 . D-83004 Rosenheim