Instructions for Making Salvation Bracelets
Materials Needed (these materials can be found at your local craft store or in the craft section
of your local department store):
Hemp Cord or Leather Lacing
(We prefer using the hemp cord; it is less expensive and not as messy as the
leather. The leather will hold up better over time.)
Pony Beads; 1 package of each color
Gold or Yellow
Black
Red
White
Green
Salvation Bracelets Cards
Download cards that you can print out from the right column of our web page
“Salvation Bracelets”. Print them out, cut them into individual cards, and make a
hole in one corner with a hole punch where it won’t interfere with the text.
(If you want you can print out only the side with the explanation and put your logo
on the front)
Instructions
1. Cut the hemp cord or leather lacing into 15 inch lengths.
2. Tie a knot slightly off center on each length.
3. Add the pony beads to the longer end of the cord/leather by threading them on in this
order: Gold/Yellow, Black, Red, and White.
4. Thread the card onto the cord/leather.
5. Thread on the Green bead.
6. Tie a knot next to the green bead to hold the beads in place in the center of the
cord/leather.
Your bracelets are now ready to be given out. Offer them as a free gift to whoever is willing to
listen to the story of the colors.
Jeff Goss Ministries
An Evangelistic Ministry
Rescuing Souls, Giving Hope and a Future
P.O. Box 328, High Ridge, MO 63049 www.jeffgossministries.org