Installation Requirements
Slayer Espresso 2-group
Counter
30.5 in / 77.5 cm
• Width: 30.5 inches / 77.5 centimeters
2.75 in / 7 cm
4.75 in / 12 cm
• Weight: 220 lbs / 100 kg (tanks filled)
Measurements do not include overhanging wood components:
portafilters, brew actuators, steam handles, cup rails
17 in / 43.5 cm
• Height: 17 inches / 43.5 centimeters
Ø 2 in /
5 cm
Ø 2.75 in /
7 cm
26.5 in / 67.5 cm
• Length: 26.5 inches / 67.5 centimeters
Drip tray edge
Water
• 3/8-inch BSP dedicated cold water line with
shutoff valve (in North America, 3/8-inch
compression fitting is included)
• Incoming water pressure: 3 Bar min, 5 Bar max
• Water hardness cannot exceed 50ppm, otherwise
a water softener is needed
Power
9 bars
• Single-phase: 200-260 volts AC, 50/60 hertz,
26 amps, 5,700 watts
• Three-phase: 380-400 volts AC, 50/60 hertz,
17 amps, 5,700 watts
Line pressure to hot
water mix valve
Water line in
• Receptacle: Nema 6-50
*Male plug end is included only when UL specifications have
been requested
Drain
• Open gravity drain located within 4 feet / 1.2
meters of the machine
• Ensure drain line is always sloping downwards
Requires
220 V, 30
A, singlephase male
plug end*
Drain hose
Water
filter
• Drain hose: 7/8-inch outside diameter, 5/8inch inside diameter (2.2-centimeter outside
diameter, 1.6-centimeter inside diameter)
3/8-inch water
line connects to
water system with
shutoff valve
Water
line in
®
P +1 2 0 6 28 4 7 1 7 1
F +1 2 0 6 28 4 7 76 6
S U P P O R T@ S L AY E R E S P R E S S O .C O M
61 3 3 6 T H A V E S . S E AT T L E , W A 9 81 0 8
S L AY E R E S P R E S S O .C O M