High Specification Tyres
For Climbing Kerbs
Accessible Centre Unit
For Easy Adjustment
Cutting Unit Options For
All Cutting Conditions
Rear Crash Frame For
Added Protection
LT322
Large Tool Box For
Storage
Ergonomic Controls
For Operator Comfort
Triple Turf Mower
HAYTER LIMITED, SPELLBROOK, BISHOP'S STORTFORD, HERTS CM23 4BU.
-
TEL:+44 (0)1279 723444
-
FAX:+44 (0)1279 600338
-
E'MAIL [email protected]
-
www.hayter.co.uk
LT322 Triple Turf Mower
Kubota Engine
ROPS Certified Protection
Performance is maximised by using the reliable Kubota V1205 indirect injection diesel
engine. This fuel efficient engine supplies
ample power to both the cutting circuit and
2WD transmission system.
Available are the folding 2 post ROPS frame
and cab. The cab offers excellent protection
from the elements as well as a safe environment for the operator. The cab can be pivoted at the front to gain access for easy servicing.
Accessibility for maintenance and servicing could
not be easier. In a matter of seconds it is possible
to tilt the operator platform and the rear engine
cover to gain access to all the important components of the machine.
The LT322 has been designed to achieve a high
level of performance at a cost effective price.
This general purpose triple turf mower is
extremely versatile and can be used for a number of different applications.
Rear Axle
Radiator and Oil Cooler
The strong rear axle assembly incorporates a
steering shockload protection system. This
feature is particularly beneficial when climbing
kerbs or working in rough terrain. It also protects the rear axle components against potential damage.
The easy to clean open core radiator matrix
and five bar oil cooler, ensure maximum
cooling efficiency in all conditions. An audible warning system will operate the horn in
the unlikely event of over-heating.
SPECIFICATION
Engine
Kubota V1205-BB-EC. 4 cylinder diesel water cooled indirect
injection. Electric start - 1199 cc - 28 hp (21 kw) at 2800 rpm
(DIN70020)
Transmission
Closed loop hydrostatic - 2WD system.
Foot operated differential lock
Transport Speed
Mowing Speed
(Recommended)
Weight
Dimensions
Wheel base
Transport width
Cutting width
Working width
Length
Height
0 -14 mph
0 - 7 mph
0 - 8 mph
0 - 4 mph
(22 kph)
(11 kph)
(13 kph)
(6.5 kph)
1100 kg
(2420 lbs) Fully laden without operator or options
1440 mm
1575 mm
2120 mm
2300 mm
2690 mm
1520 mm
(56 3/4'')
(62'')
(83 1/2'')
(90 1/2'')
(106'')
(60'')
Ground Pressure
Steering
Brakes
0.73 - 1.68 kg/cm
Fuel Capacity
45 litres
2
Tyres
Front:- 26 x 12.00 - 12, 4 ply turf pattern - (8 ply option)
Rear:- 18 x 8.50 - 8, 4 ply turf pattern
Hydraulic System
40 litres (8.8 UK gallons). Diagnostic hydraulic test ports
10 micron filtration
Controls
3 levers for independent lift to each cutting unit
Hand throttle
Key ignition switch
Cutting unit drive switch (On - Off - Reverse and Backlap)
Emergency / parking brake - Single hand operated lever
Foot operated forward / reverse pedal
Foot operated differential lock
Weight transfer adjustment from operator position
Push button operated horn
Adjustable steering wheel/column
Optional light switches
Forward
Reverse
Forward
Reverse
Narrow Option 1454 mm (57 1/4'')
Instrumentation
(10 - 24 psi) Depending on turf conditions
Warning light
indicators
Engine oil pressure
Battery charge
Engine coolant temperature
Engine pre-heat
Interlock lights
Cutterdrive switch off
Parking / emergency brake engaged
Transmission in neutral
Gauges
Fuel level tank indicator
Hydraulic oil tank sight glass
Digital hourmeter
Hydrostatic rear wheel steering with shockload protection
Hydrostatic service braking. Oil immersed disc brakes for
parking / emergency braking
(10 UK gallons)
- Hydraulic oil temperature
- Hydraulic transmission filter blocked
- Hydraulic return filter blocked
Operator Safety
Cutting unit drive disengages when operator leaves seat.
Engine starts only when forward / reverse pedal is in neutral,
the parking brake is applied and the cutting units are disengaged.
Seat
High back with adjustable angle - Arm rests - Adjustable
suspension to suit weight of operator.
Height adjustment
60 mm
(2 1/2'')
Fore - aft adjustment 150 mm (6'')
Options
Full weather ROPS cab - Folding 2 post ROPS frame Full European lighting kit - Flashing beacon Seat :- Air suspension - Longer arm rests - Back rest
extension - Lumbar support
Front roller - Smooth or Grooved for floating configuration.
Cutting Units
Type
Cylinder drive
Cutting unit lift
Cutting cylinder
MK3 fully interchangeable cutting unit - 762mm
(30'') width
Direct drive hydraulic motor
Fully independent hydraulic lift
4, 6, 8 or 10 blade
200 mm (8'') diameter
4 or 6 blade
250 mm
(10'') diameter
Cylinder to bedknife Handwheel adjustment
Cylinder speed
1050 rpm approx.
Height of cut
Spanner adjustment 12 - 80mm
(1/2'' - 3 1/8'')
Clip frequency
Configuration
Rear roller
4 blade:- 23 cuts/m
6 blade:- 34 cuts/m
8 blade:- 46 cuts/m
10 blade:- 57 cuts/m
Fixed or floating
Smooth
(21 cuts/yd)
(31 cuts/yd)
(42 cuts/yd)
(52 cuts/yd)
at
at
at
at
11 kph (7 mph)
11 kph (7 mph)
11 kph (7 mph)
11 kph (7 mph)
76 mm (3'') diameter