Sterilizable
Start saving now with Finesse autoclavable sensors
“A penny saved is
a penny earned.”
– Benjamin Franklin (1706-1790)
Give us your order, and experience some serious savings. Proven performance, innovative design
and an affordable price – if those weren’t reasons enough to choose Finesse’s reusable bioprocess pH
and DO sensors and transmitters, we’ve just added two others. #1 Our TruDO Optical sensors can be
used instantly without lengthy polarization. There is no electrolyte and the optical elements don’t require
maintenance. TruDO Optical sensors also don’t require a transmitter and can be directly connected to
your controller. #2 Our TruCell2 cell density sensors provide proven measurement performance and
diagnostics for fermentation control, for only the price of a DO loop. Now that is a lot of pennies.
Visit www.finesse.com to learn more about our pH electrodes, DO sensors and cell density loops. Try
Finesse sensors today, and experience some serious savings tomorrow.
800-598-9515
www.finesse.com
TruBio and TruViu are trademarks of Finesse Solutions, LLC.
In Europe, call: +41 81 641 20 00
Solutions for Life
Sterilizable Sensors
Measurement
2010-0420
Sensor Solutions –
Sterilizable
TruDO Optical
TrupH
TruDO
TruCell2
TruData
Finesse Solutions, LLC
71 Daggett Drive
San Jose, CA 95134
Finesse Solutions AG
Via Sogn Gieri 27a
CH-7402 Bonaduz
Switzerland
800-598-9515
www.finesse.com
17
Continued
Optical Dissolved Oxygen Sensor
TruDO® Optical sensors are designed to provide comparable performance, with no polarization and no electrolyte. These sensors have
a built in transmitter.
pH Electrode
The TrupH® family of 12 mm pH electrodes is designed to
provide an affordable solution with better repeatability and increased reliability.
Dissolved Oxygen Sensor
The TruDO® family of rebuildable dissolved oxygen sensors is
designed to be a cost-effective solution with solid performance,
greater robustness, and improved reliability.
Cell Density Monitor
The TruCell®2 optical probe measures cell density. All wetted materials are USP class VI compliant. The TruCell2 Transmitter provides
a 4–20 mA output, and allows automatic zeroing, temperature compensation, diagnostics, curve fitting and probe verification.
Data Logging
TruData™ Precision Current Loop (4-20mA) and Voltage Data
Loggers are convenient and versatile recorders for reliable
logging of a wide range of measurement variables. These data
loggers enable rapid data transfer via USB.
pH and DO Transmitters
Our family of pH and dissolved
oxygen transmitters feature full
text prompts, menu driven configuration, a large backlit LCD
display, isolated 4–20 mA outputs, and optional HART communications.
Solutions for Life
Sterilizable Sensors
TruDO Optical
Features
CIP, SIP autoclave
compatible
optical dissolved
oxygen sensor
2010-0420
TruDO Optical
Dissolved Oxygen Sensors
Continued
TruDO® Optical probes solve the problems associated with traditional
DO sensors i.e., midrun sensor failure, polarization, leaking electrolyte,
broken or poisoned cathodes. The TruDO Optical sensor has one
replaceable part, the sensor cap. Unlike a traditional DO sensor,
the TruDO sensor cap needs to be replaced very infrequently (every
6 months or so). In side by side tests the sensor tracks traditional
DO probes without the need for membrane replacement after every
run or two. In addition the probe can be kept in the reactor without
maintenance before CIP and left dry without any adverse effects.
g
Equal or better
performance
than traditional
DO sensors
Plug and Play
TruDO Optical 12mm diameter sensors are designed for plug and play
replacement of existing polarographic DO sensors.
g
Pressure and
damage resistant
membrane –
up to 12 bar
g
Compatible
with existing
DO transmitters
g
4 ppb to 300%
saturation range
g
T82/D4 Cables
Connect your existing DO cable to the TruDO Optical power adapter,
attach the TruDO Optical sensor and plug in the power supply. You are
ready to go! Follow your normal SOP for calibration and operation.
VP Cables
Connect your existing DO cable to the TruDO Optical sensor, then attached
the TruDO power supply to the two unused wires on the VP 6.0 cable to
power the sensor, plug in the power supply and you are ready to go!
New DO Loops
No transmitter is required! While the TruDO Optical sensor is designed as
a plug and play replacement for traditional polaragraphic DO sensors it
can also be used without a transmitter. The reason is that the transmitter
is already built into the sensor saving you the cost of a transmitter for
every new installation.
4-20 mA Output
For customers that want a 4 to 20 mA dissolved oxygen signal output,
the TruDO Optical sensor provides this when connected to a VP cable
and the TruDO 4-20 mA output adapter.
D4/T82 Connection
Finesse Solutions, LLC
71 Daggett Drive
San Jose, CA 95134
VP 6.0 Connection
Finesse Solutions AG
Via Sogn Gieri 27a
CH-7402 Bonaduz
Switzerland
800-598-9515
www.finesse.com
18
TruDO is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
Solutions for Life
Sterilizable Sensors
2010-0420
Continued
Digital Communication
TruDO Optical
The other choice is to use the TruDO Optical sensor with digital RS485
ModBus RTU communication e.g.; with TruBio. With this option more
information than just the dissolved oxygen reading can be retrieved
from the sensor. Additional information includes: duration of use, time
at elevated temperature, and cap health. Like the other modes of
operation listed above you must supply power to the sensor (7 to 30
VDC). The dissolved oxygen sensor then acts as a slave device and
can be used as one of up to 32 devices.
TruDO Optical 12 mm diameter dissolved oxygen sensors provide
superior performance, greater repeatability and improved reliability in
bioprocess applications such as cell culture and fermentation.
Specifications
Measurement
Optical phase shift
Range
4 ppb to 300% saturation (dissolved oxygen)
Temperature
0 to 130°C
Pressure
12 bar maximum
Temperature
22 kohm thermistor
Compensation
Wetted materials
316L S.S., USP class 6 silicone
Sensors 12mm
DOS-OPT-VP-120
DOS-OPT-VP-160
DOS-OPT-VP-225
DOS-OPT-VP-325
DOS-OPT-VP-425
VP 8.0 Cables
CAB-VP8-10, 10 ft/3m
CAB-VP-15, 15ft.5m
Replacement Cap
DOS-OPT-CAP
Power Adapter for D4/T82 Cables
DOS-OPT-PWR-ADT
4-20 mA Output Adapter
DOS-OPT-420-ADT
Finesse Solutions, LLC
71 Daggett Drive
San Jose, CA 95134
Polarizers
Finesse Solutions AG
Via Sogn Gieri 27a
CH-7402 Bonaduz
Switzerland
Replacements for 12mm
None required
Replaces Broadley-James Model D140/D145
Replaces Mettler-Toledo/Ingold Model InPro 6800
800-598-9515
www.finesse.com
19
TruDO is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
Solutions for Life
Sterilizable Sensors
TrupH
2010-0420
Continued
TrupH – pH Electrodes
The TrupH® family of 12 mm pH electrodes is designed for improved
performance. The automated manufacturing process results in better
repeatability and increased reliability of these electrodes in bioprocess
applications such as cell culture and fermentation.
Specifications
Features
Fast response
g
Highly repeatable
g
Proven reliability
Measurement
Electrochemical
Range
0 –14 (2 – 12 pH for maximum precision)
Temperature
0 –135°C
Pressure
6 bar maximum
Connection
Pg 13.5
Temperature
Integral Pt100 (VP model)
Compensation
g
Suitable for
autoclave,
SIP and CIP
g
Certified
“Like for Like”
replacement for
Broadley-James/
Mettler-Toledo
g
Electrodes
S8
K8
VP (Pt 100)
PHS-EFP-S8-120
PHS-EFP-K8-120
PHS-EFP-VP-120
PHS-EFP-S8-225
PHS-EFP-K8-225
PHS-EFP-VP-225
PHS-EFP-S8-325
PHS-EFP-K8-325
PHS-EFP-VP-325
PHS-EFP-S8-425
PHS-EFP-K8-425
PHS-EFP-VP-425
S8
K8
VP
CAB-S8-06, 6 ft (2 m)
CAB-K8-06, 6 ft (2 m)
CAB-VP-06, 6 ft (2 m)
CAB-S8-10, 10 ft (3 m)
CAB-K8-10, 10 ft (3 m)
CAB-VP-10, 10 ft (3 m)
Cables
Housings (Guarded)
HSG-STD-025-G
fits 25 mm standard side port
HSG-SFT-025-G
fits 25 mm safety side port
HSG-SNY-075-G
fits 1½˝ Sanitary Side Port
Housings (Unguarded)
HSG-STD-025-U
fits 25 mm standard side port
HSG-SFT-025-U
fits 25 mm safety side port
Buffer
PHS-BUF-04, 4.01 pH buffer
PHS-BUF-07, 7.01 pH buffer
PHS-BUF-10, 10.01 pH buffer
Like for Like
Finesse Solutions, LLC
71 Daggett Drive
San Jose, CA 95134
S8
K8
VP
Replaces Broadley-
Replaces Broadley-
Replaces Broadley-
Finesse Solutions AG
Via Sogn Gieri 27a
CH-7402 Bonaduz
Switzerland
James Model F-635
James Model F-695
James Model F-235
Replaces Mettler-Toledo/
Replaces Mettler-Toledo/
Replaces Mettler-Toledo/
Ingold Model DPA
Ingold Model DPAS
Ingold Model InPro 3250
800-598-9515
www.finesse.com
20
TrupH is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
S8
K8
VP
Solutions for Life
Sterilizable Sensors
TrupH
Features
2010-0420
TrupH K8
TrupH® K8 12 mm electrodes are designed for improved performance
and reliability in cell culture and fermentation applications. A pH electrode includes the reference and sensing electrodes, an optional temperature sensor, and an electrical connector (K8). For a given transmitter, the pH electrode can be replaced. The pH electrode can be
separated from the cable and transmitter for sterilization. Insertion
lengths of 120, 225, 325 or 425 mm are available.
Specifications
pH
0 –14 (2 –12 for maximum precision)
Temperature
0 –135°C
Pressure
6 bar maximum
Connection
Pg 13.5
g
Fast response
g
Highly repeatable
g
Proven reliability
g
Suitable for
autoclave,
SIP and CIP
PHS-EFP-K8-120
Certified
“Like for Like”
replacement for
Broadley-James/
Mettler-Toledo
PHS-EFP-K8-425
g
Continued
Electrodes
PHS-EFP-K8-225
PHS-EFP-K8-325
Cables
CAB-K8-06, 6 ft (2 m)
CAB-K8-10, 10 ft (3 m)
Housings (Guarded)
HSG-STD-025-G
fits 25 mm standard side port
HSG-SFT-025-G
fits 25 mm safety side port
HSG-SNY-075-G
fits 1½˝ sanitary side port
Housings (Unguarded)
HSG-STD-025-U
fits 25 mm standard side port
HSG-SFT-025-U
fits 25 mm safety side port
Buffer
PHS-BUF-04, 4.01 pH buffer
PHS-BUF-07, 7.01 pH buffer
PHS-BUF-10, 10.01 pH buffer
Like for Like
Replaces Broadley-James Model F-695
Replaces Mettler-Toledo/Ingold Model DPAS
Finesse Solutions, LLC
71 Daggett Drive
San Jose, CA 95134
Finesse Solutions AG
Via Sogn Gieri 27a
CH-7402 Bonaduz
Switzerland
800-598-9515
www.finesse.com
21
TrupH is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
Solutions for Life
Sterilizable Sensors
TrupH
Features
2010-0420
TrupH S8
TrupH® VP 12 mm pH electrodes are designed for improved performance
and reliability in cell culture and fermentation applications. A pH
electrode includes the reference and sensing electrodes, an optional
temperature sensor, and an electrical connector (VP). For a given
transmitter, the pH electrode can be replaced. The pH electrode can
be separated from the cable and transmitter for sterilization. Insertion
lengths of 120, 225, 325 or 425 mm are available.
Specifications
pH
0 –14 (2 –12 for maximum precision)
Temperature
0 –135°C
Pressure
6 bar maximum
Connection
Pg 13.5
g
Fast response
g
Highly repeatable
g
Proven reliability
g
Suitable for
autoclave,
SIP and CIP
Electrodes
Certified
“Like for Like”
replacement for
Broadley-James/
Mettler-Toledo
PHS-EFP-S8-325
g
Continued
PHS-EFP-S8-120
PHS-EFP-S8-225
PHS-EFP-S8-425
Cables
CAB-S8-06, 6ft (2m)
CAB-S8-10, 10ft (3m)
Housings (Guarded)
HSG-STD-025-G
fits 25 mm standard side port
HSG-SFT-025-G
fits 25 mm safety side port
HSG-SNY-075-G
fits 1½˝ sanitary side port
Housings (Unguarded)
HSG-STD-025-U
fits 25 mm standard side port
HSG-SFT-025-U
fits 25 mm safety side port
Buffer
PHS-BUF-04, 4.01 pH buffer
PHS-BUF-07, 7.01 pH buffer
PHS-BUF-10, 10.01 pH buffer
Like for Like
Replaces Broadley-James Model F-635
Replaces Mettler-Toledo/Ingold Model DPA
Finesse Solutions, LLC
71
Daggett
Drive Bldg 1
3350
Scott Blvd,
San Jose,
CA CA
95134
Santa
Clara,
95054
Finesse Solutions AG
Via Sogn Gieri 27a
CH-7402 Bonaduz
Switzerland
800-598-9515
877-204-8644
www.finesse.com
22
TrupH is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
Solutions for Life
Sterilizable Sensors
TrupH
Features
2010-0420
Continued
TrupH VP
TrupH® 12 mm pH electrodes are designed for improved performance
and reliability in cell culture and fermentation applications. A pH
electrode includes the reference and sensing electrodes, an optional
temperature sensor, and an electrical connector (VP). For a given
transmitter, the pH electrode can be replaced. The pH electrode can
be separated from the cable and transmitter for sterilization. Insertion
lengths of 120, 225, 325 or 425 mm are available.
Specifications
pH
0 –14 (2 –12 for maximum precision)
Temperature
0 –135°C
Pressure
6 bar maximum
g
Fast response
g
Highly repeatable
Connection
Pg 13.5
g
Proven reliability
Termperature
Integral Pt100
g
Suitable for
autoclave,
SIP and CIP
Compensation
Certified
“Like for Like”
replacement for
Broadley-James/
Mettler-Toledo
PHS-EFP-VP-225
g
Electrodes
PHS-EFP-VP-120
PHS-EFP-VP-325
PHS-EFP-VP-425
Cables
CAB-VP-06, 6 ft (2 m)
CAB-VP-10, 10 ft (3 m)
Housings (Guarded)
HSG-STD-025-G
fits 25 mm standard side port
HSG-SFT-025-G
fits 25 mm safety side port
HSG-SNY-075-G
fits 1½˝ sanitary side port
Housings (Unguarded)
HSG-STD-025-U
fits 25 mm standard side port
HSG-SFT-025-U
fits 25 mm safety side port
Buffer
PHS-BUF-04, 4.01 pH buffer
PHS-BUF-07, 7.01 pH buffer
PHS-BUF-10, 10.01 pH buffer
Finesse Solutions, LLC
71 Daggett Drive
San Jose, CA 95134
Finesse Solutions AG
Via Sogn Gieri 27a
CH-7402 Bonaduz
Switzerland
800-598-9515
www.finesse.com
23
TrupH is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
Solutions for Life
Sterilizable Sensors
TrupH
2010-0420
Dual pH/DO Transmitter
Continued
The Dual pH/DO Transmitter is designed for the
simultaneous measurement of pH and dissolved oxygen
(DO) using traditional sensors. These units feature full
text prompts, menu driven configuration, large backlit
LCD display and two isolated 4–20 mA outputs.
Physical Description
Case Material
Polycarbonate
Rating
NEMA 4X /CSA 4 (IP 65)
Dimensions
6.1˝x 6.1˝x 5.15˝ (155x155x131mm)
Mounting
Remote, panel or pipe mounted
Simultaneous
pH and DO
measurement
Conduit Openings
Accepts Pg 13.5 or ½˝ conduit fittings
Display
monochromatic, graphic LCD. Backlit.
Dual isolated
4 – 20 mA outputs
Power
20– 30 VDC
Output
Two isolated 4-20 mA or 0-20 mA.
Features
g
g
Real time display
of diagnostic
measurements
Specifications
Continuously adjustable. Linear or logarithmic
g
Available in
English, Spanish,
French, German
and Italian
g
Pipe or panel
mounted
g
Operating Temperature
0 – 55°C (32–131°F)
Storage Temperature
0–60°C (32–140°F)
Relative Humidity
5–95% (non-condensing)
Analog Output Signal
Two wire, 4–20 mA output
Fully scalable over sensor range
Output Accuracy
+/- 0.05 mA
RFI/EMI
EN-50081/EN-50082
Weight/Shipping Weight Approximately 3 lb / 4 lb (1.5 kg / 2 kg)
Warranty
Every Dual pH/DO Transmitter is warranted for
one full year (12 months) from date of shipment
against defects in material and workmanship
pH Input
Measurement Range [pH] 0 to 14 pH
Accuracy/Repeatability
±0.01 pH
Stability
±0.01 pH/month, non-cumulative
Temperature
Pt100 RTD, Automatic or Manual
Compensation
0–50°C (32 – 122°F)
Response time (100%)
5 sec
Input filter
4 sec
Dissolved Oxygen (DO) Input
Measurement Range
Finesse Solutions, LLC
71 Daggett Drive
San Jose, CA 95134
0–20 ppm (mg/L) dissolved oxygen;
0–250% saturation
Resolution
0.01 ppm; 0.1 ppb for 499A TrDO sensor
(when O2 <1.00 ppm); 0.1%
Finesse Solutions AG
Via Sogn Gieri 27a
CH-7402 Bonaduz
Switzerland
Temperature Correction Automatic (with Pt100 RTD in sensor) or manual
Response time (100%)
6 sec
800-598-9515
www.finesse.com
Input filter
5 sec
24
pH/DO Transmitter
0–50°C. Can be disabled if desired.
TXM-PHS-DOS-PNL
Remote, panel mounted
TrupH is a trademark of
Finesse Solutions, LLC.
© Finesse Solutions, LLC, 2011.
Solutions for Life
Sterilizable Sensors
TrupH
2010-0420
Continued
TrupH Cables
TrupH® cables are designed to connect sensors and transmitters with
improved performance, better repeatability and increased reliability
in bioprocess applications such as cell culture and fermentation. The
cables are available with a variety of standard connectors for pH, and S8 Connection
are also compatible with sensors made by other manufacturers.
TrupH cables are available with S8, K8 and VP connectors in 6 ft (2 m)
and 10 ft (3 m) lengths.
Features
Specifications
pH
S8, K8 and VP connectors
Optimum
performance
Lengths
6 ft (2 m) and 10 ft (3 m)
Designed for high
performance
S8
K8
VP
CAB-S8-06, 6 ft/2 m
CAB-K8-06, 6 ft/2 m
CAB-VP-06, 6 ft/2 m
CAB-S8-10, 10 ft/3 m
CAB-K8-10, 10 ft/3 m
CAB-VP-10, 10 ft/3 m
g
g
Compatible with
Broadley-James
and Mettler Toledo
g
pH Cables
Available with
S8, K8 or VP
connectors
g
Lengths of 6ft
(2 m) or 10 ft (3 m)
g
Finesse Solutions, LLC
71 Daggett Drive
San Jose, CA 95134
Finesse Solutions AG
Via Sogn Gieri 27a
CH-7402 Bonaduz
Switzerland
800-598-9515
www.finesse.com
25
K8 Connection
TrupH is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
VP 6.0 Connection
Solutions for Life
Sterilizable Sensors
TrupH
2010-0420
TrupH Housings
TrupH® housings are designed to protect traditional 12 mm pH electrodes
when they are used in stainless steel bioreactors or fermentors. These
housings are manufactured using 316L stainless steel and only use
FDA approved wetted materials (e.g., o-rings). TrupH housings offer a
standard PG13.5 threaded insert for the 12 mm sensor and a selection
of interfaces with Standard Ingold, B. Braun Safety and Sanitary ports.
Specifications
Wetted Material
316L stainelss steel, Viton o-rings
Sensor Connection
Pg 13.5
Interfaces to
Standard Ingold,
B. Braun safety
and sanitary ports
Port Connections
Standard, safety and 1½˝ sanitary
Pressure
6 bar maximum
Insertion
Guarded or unguarded
FDA approved
wetted materials
HSG-STD-025-G
fits 25 mm standard side port
HSG-SFT-025-G
fits 25 mm safety side port
HSG-SNY-075-G
fits 1½˝ sanitary side port
Features
g
g
Pg 13.5 threaded
insertion for sensors
g
Guarded and
unguarded designs
g
Housings (Side Mount, Guarded)
Housings (Side Mount, Unguarded)
HSG-STD-025-U
fits 25 mm standard side port
HSG-SFT-025-U
fits 25 mm safety side port
Material certs
available
g
Guarded standard, 24mm O-ring position
Finesse Solutions, LLC
71 Daggett Drive
San Jose, CA 95134
Guarded safety, 50mm O-ring position
Finesse Solutions AG
Via Sogn Gieri 27a
CH-7402 Bonaduz
Switzerland
800-598-9515
www.finesse.com
26
TrupH is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
Continued
Solutions for Life
Sensor Solutions
TruDO
Sterilizable
Sensors
TruDO
2010-0420
Continued
TruDO – Dissolved Oxygen Sensor
The TruDO® family of re-buildable dissolved oxygen sensors is designed
for superior performance. The semi-automated manufacturing process
results in greater repeatability and improved reliability of these sensors
in bioprocess applications such as cell culture and fermentation.
Specifications
Features
Fast response
g
Highly repeatable
g
Measurement
Polarographic
Range
10 ppb to 200% saturation
(dissolved oxygen)
Temperature
0 –135°C
Pressure
4 bar maximum
Temperature
22 kohm thermistor
Compensation
Proven reliability
Wetted Materials
316L S.S.
Suitable for
autoclave,
SIP and CIP
Surface Finish
Ra 12 (electro-polish)
D4/T82
VP
Certified
“Like for Like”
replacement for
Broadley-James/
Mettler-Toledo
DOS-OFF-D4-120
DOS-OFF-VP-120
DOS-OFF-D4-225
DOS-OFF-VP-225
DOS-OFF-D4-325
DOS-OFF-VP-325
DOS-OFF-D4-425
DOS-OFF-VP-425
g
g
g
Sensors 12mm
Sensors 25mm
D4/T82
VP
DOS-STD-D4-070
DOS-STD-VP-070
(Standard Port)
(Standard Port)
DOS-STF-D4-070
(Safety Port)
Cables
D4/T82
VP
CAB-D4-06, 6 ft/2 m
CAB-VP-06, 6 ft/2 m
CAB-D4-10, 10 ft/3 m
CAB-VP-10, 10 ft/3 m
Membrane Replacement Kit
DOS-MEM-12
Polarizers
DOS-POL-D4 (D4/T82)
DOS-POL-VP (VP)
Finesse Solutions, LLC
71 Daggett Drive
San Jose, CA 95134
Finesse Solutions AG
Via Sogn Gieri 27a
CH-7402 Bonaduz
Switzerland
800-598-9515
www.finesse.com
27
Like for Like 12mm
Replaces Broadley-James Model D140/D145
Replaces Mettler-Toledo/Ingold Model InPro 6800
Like for Like 25mm
Replaces Broadley-James Model D400/D405/D430/D435
Replaces Mettler-Toledo/Ingold Model InPro 6800
TruDO is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
25mm
12mm
Solutions for Life
Sensor Solutions
TruDO
Sterilizable
Sensors
TruDO
Features
Fast response
g
2010-0420
TruDO 12 mm
TruDO® 12 mm sensors are designed for improved performance and
reliability in cell culture and fermentation applications. The DO sensor
includes an anode, cathode, membrane, electrolyte, and the electrical
connector that is connected to the transmitter using a cable (D4 or VP).
For a given transmitter, the sensor probe can be replaced. The sensor
probe can be separated from the cable and transmitter for sterilization.
Insertion lengths of 120, 225, 325 or 425 mm are available.
Specifications
Measurement
Polarographic
Dissolved Oxygen
0 .1–200% air saturation
10 ppb to saturation
Highly repeatable
Temperature
0 –135°C
Proven reliability
Pressure
4 bar maximum
Suitable for
autoclave,
SIP and CIP
Temperature
22 kohm thermistor
g
g
g
Certified
“Like for Like”
replacement for
Broadley-James/
Mettler-Toledo
Compensation
Wetted Materials
316L S.S.
Surface Finish
Ra 12 (electro-polish)
g
Sensors
D4/T82
VP
DOS-OFF-D4-120
DOS-OFF-VP-120
DOS-OFF-D4-225
DOS-OFF-VP-225
DOS-OFF-D4-325
DOS-OFF-VP-325
DOS-OFF-D4-425
DOS-OFF-VP-425
Cables
D4/T82
VP
CAB-D4-06, 6 ft/2 m
CAB-VP-06, 6 ft/2 m
CAB-D4-10, 10 ft/3 m
CAB-VP-10, 10 ft/3 m
Membranes
DOS-MEM-12
Polarizers
DOS-POL-D4 (D4/T82)
DOS-POL-VP
Like for Like
Replaces Broadley-James Model D140/D145
Replaces Mettler-Toledo/Ingold Model InPro 6800
Finesse Solutions, LLC
71 Daggett Drive
San Jose, CA 95134
Finesse Solutions AG
Via Sogn Gieri 27a
CH-7402 Bonaduz
Switzerland
800-598-9515
www.finesse.com
28
TruDO is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
Continued
Solutions for Life
Sensor Solutions
TruDO
Sterilizable
Sensors
TruDO
Features
Fast response
g
Highly repeatable
2010-0420
TruDO 25 mm
TruDO® 25 mm sensors are designed for improved performance and
reliability in cell culture and fermentation applications. The DO sensor
includes an anode, cathode, membrane, electrolyte, and the electrical
connector that is connected to the transmitter using a cable (D4 or VP).
For a given transmitter, the sensor probe can be replaced. The sensor
probe can be separated from the cable and transmitter for sterilization. The
insertion length is 70 mm, and housing types are standard (D4 and VP) or
B. Braun safety (D4 only).
Specifications
Measurement
Polarographic
Dissolved Oxygen
0 .1–200% air saturation
g
10 ppb to saturation
Proven reliability
Temperature
0 –135°C
Suitable for
autoclave,
SIP and CIP
Pressure
4 bar maximum
Temperature
22 kohm thermistor
g
g
Certified
“Like for Like”
replacement for
Broadley-James/
Mettler-Toledo
g
Compensation
Wetted Materials
316L S.S.
Surface Finish
Ra 12 (electro-polish)
Sensors
D4/T82
VP
DOS-STD-D4-070
DOS-STD-VP-070
(Standard Port)
(Standard Port)
DOS-STF-D4-070
(Safety Port)
Cables
D4/T82
VP
CAB-D4-06, 6 ft/2 m
CAB-VP-06, 6 ft/2 m
CAB-D4-10, 10 ft/3 m
CAB-VP-10, 10 ft/3 m
Membranes
DOS-MEM-12
Polarizers
DOS-POL-D4 (D4/T82)
DOS-POL-VP
Like for Like
Replaces Broadley-James Model D400/D405/D430/D435
Replaces Mettler-Toledo/Ingold Model InPro 6800
Finesse Solutions, LLC
71 Daggett Drive
San Jose, CA 95134
Finesse Solutions AG
Via Sogn Gieri 27a
CH-7402 Bonaduz
Switzerland
800-598-9515
www.finesse.com
29
TruDO is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
Continued
Solutions for Life
Sterilizable Sensors
TruDO
2011-0322
Dual pH/DO Transmitter
Continued
The Dual pH/DO Transmitter is designed for the
simultaneous measurement of pH and dissolved oxygen
(DO) using traditional sensors. These units feature full
text prompts, menu driven configuration, large backlit
LCD display and two isolated 4–20 mA outputs.
Physical Description
Case Material
Polycarbonate
Rating
NEMA 4X /CSA 4 (IP 65)
Dimensions
6.1˝x 6.1˝x 5.15˝ (155x155x131mm)
Mounting
Remote, panel or pipe mounted
Simultaneous
pH and DO
measurement
Conduit Openings
Accepts Pg 13.5 or ½˝ conduit fittings
Display
monochromatic, graphic LCD. Backlit.
Dual isolated
4 – 20 mA outputs
Power
Features
g
g
Real time display
of diagnostic
measurements
Specifications
Output
Available in
English, Spanish,
French, German
and Italian
Pipe or panel
mounted
g
Two isolated 4-20 mA or 0-20 mA.
Continuously adjustable. Linear or logarithmic
g
g
20– 30 VDC
Operating Temperature
0 – 55°C (32–131°F)
Storage Temperature
0–60°C (32–140°F)
Relative Humidity
5–95% (non-condensing)
Analog Output Signal
Two wire, 4–20 mA output
Fully scalable over sensor range
Output Accuracy
+/- 0.05 mA
RFI/EMI
EN-50081/EN-50082
Weight/Shipping Weight Approximately 3 lb / 4 lb (1.5 kg / 2 kg)
Warranty
Every Dual pH/DO Transmitter is warranted for
one full year (12 months) from date of shipment
against defects in material and workmanship
pH Input
Measurement Range [pH] 0 to 14 pH
Accuracy/Repeatability
±0.01 pH
Stability
±0.01 pH/month, non-cumulative
Temperature
Pt100 RTD, Automatic or Manual
Compensation
0–50°C (32 – 122°F)
Response time (100%)
5 sec
Input filter
4 sec
Dissolved Oxygen (DO) Input
Measurement Range
Finesse Solutions, LLC
71 Daggett Drive
San Jose, CA 95134
0–20 ppm (mg/L) dissolved oxygen;
0–250% saturation
Resolution
0.01 ppm; 0.1 ppb for 499A TrDO sensor
(when O2 <1.00 ppm); 0.1%
Finesse Solutions AG
Via Sogn Gieri 27a
CH-7402 Bonaduz
Switzerland
Temperature Correction Automatic (with Pt100 RTD in sensor) or manual
Response time (100%)
6 sec
800-598-9515
www.finesse.com
Input filter
5 sec
30
pH/DO Transmitter
0–50°C. Can be disabled if desired.
TXM-PHS-DOS-PNL
Remote, panel mounted
TruDO is a trademark of
Finesse Solutions, LLC.
© Finesse Solutions, LLC, 2011.
Solutions for Life
Sterilizable Sensors
TruDO
2010-0420
TruDO Cables
TruDO® cables are designed to connect sensors and transmitters with
improved performance, better repeatability and increased reliability D4/T82 Connection
in bioprocess applications such as cell culture and fermentation. The
cables are available with a variety of standard connectors, and are also
compatible with sensors made by other manufacturers.
TruDO cables are available with D4/T82 and VP connectors in 6 ft (2 m)
and 10 ft (3 m) lengths.
Features
Specifications
DO
D4, T82 and VP connectors
Optimum
performance
Lengths
6 ft (2 m) and 10 ft (3 m)
Designed for high
performance
DO Cables
g
g
Compatible with
Broadley-James
and Mettler Toledo
g
D4/T82
VP
CAB-D4-06, 6 ft/2 m
CAB-VP-06, 6 ft/2 m
CAB-D4-10, 10 ft/3 m
CAB-VP-10, 10 ft/3 m
Available with
D4/T82 or VP
connectors
g
Lengths of 6ft
(2 m) or 10 ft (3 m)
g
Finesse Solutions, LLC
71 Daggett Drive
San Jose, CA 95134
Finesse Solutions AG
Via Sogn Gieri 27a
CH-7402 Bonaduz
Switzerland
800-598-9515
www.finesse.com
31
Continued
TruDO is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
VP 6.0 Connection
Solutions for Life
Sterilizable Sensors
TruDO
2010-0420
TruDO Housings
TruDO® housings are designed to protect traditional 12 mm DO sensors
when they are used in stainless steel bioreactors or fermentors. These
housings are manufactured using 316L stainless steel and only use
FDA approved wetted materials (e.g., o-rings). TruDO housings offer a
standard PG13.5 threaded insert for the 12 mm sensor and a selection
of interfaces with Standard Ingold, B. Braun Safety and Sanitary ports.
Specifications
Wetted Material
316L stainelss steel, Viton o-rings
Sensor Connection
Pg 13.5
Interfaces to
Standard Ingold,
B. Braun safety
and sanitary ports
Port Connections
Standard, safety and 1½˝ sanitary
Pressure
6 bar maximum
Insertion
Guarded or unguarded
FDA approved
wetted materials
HSG-STD-025-G
fits 25 mm standard side port
HSG-SFT-025-G
fits 25 mm safety side port
HSG-SNY-075-G
fits 1½˝ sanitary side port
Features
g
g
Pg 13.5 threaded
insertion for
sensors
g
Guarded and
unguarded designs
g
Housings (Side Mount, Guarded)
Housings (Side Mount, Unguarded)
HSG-STD-025-U
fits 25 mm standard side port
HSG-SFT-025-U
fits 25 mm safety side port
Material certs
available
g
Guarded standard, 24mm O-ring position
Finesse Solutions, LLC
71 Daggett Drive
San Jose, CA 95134
Guarded safety, 50mm O-ring position
Finesse Solutions AG
Via Sogn Gieri 27a
CH-7402 Bonaduz
Switzerland
800-598-9515
www.finesse.com
32
TruDO is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
Continued