e
l
g
n
NEW!
A
t
h
g
i
R
p
H
4
.
d
e
r
e
Air-Pow
rs
Reorder No. D00•08
rinde
G
e
i
D
•
ers
d
n
a
S
c
s
i
D
ers
d
n
i
r
G
l
e
e
ter Wh
n
e
C
d
e
s
s
Depre
sives
a
r
b
A
•
ssories
e
c
c
A
•
Drills
ISH
N
I
F
•
N
A
E
CL
•
D
N
E
L
B
D •
N
A
S
•
R
R
BU
GRIND • DE
• New .4 Hp right angle geared
models in 12,000 RPM,
15,000 RPM and 20,000 RPM.
• Front and Rear Exhaust Models
• Ergonomic design,
industrial-rated,
highest quality
air tools… made
in the USA!
MADE IN THE
USA
• Grind Sheet Metal
• Sand & Deburr Metal Parts
• Weld Preparation
• Surface Condition
• Remove Rust & Paint
• Finish aluminum and much more!
®
Continued Leadership in Portable Abrasive Power Tool Technology.
R i g h t A n g l e To o l F e a t u r e s
Available with 12,000 RPM, 15,000 RPM or 20,000 RPM motor speeds.
Has Kevlar®
phenolic vanes
for longer life.
Optional 01462 Safety-Lock
Throttle is available.
Registered trademark of
DuPont de Nemours, EI,
& Co., Inc.
Features our new dual wick lubrication system, saturated with
gear oil for extended gear life (over 500 hours with proper use
of gear oil), increased performance and reduced downtime.
Includes gear oil and gun, see opposite page.
Pinion piloted on rotor to reduce
runout and increase gear life.
Oil fitting to maintain
proper gear oil saturation.
Needle bearing
assures proper
shaft alignment;
has push-out plug
for easy removal.
Lightweight ergonomic design for greater operator comfort and control.
Thermal-insulated composite housing prevents cold air transmission and
reduces vibration to the operator’s hand.
2" Diameter Disc Sanders
2" (51 mm) Diameter, Front Exhaust
NEW
eight
line H m)
r
e
t
n
m
Ce
" (60
2-3/8
Optional 01462 Safety-Lock
Throttle is available.
Abrasive Capacity:
2" (51 mm) diameter discs.
Model 51820 – 12,000 RPM
Model 51821 – 15,000 RPM
Model 51822 – 20,000 RPM
• 1/4"-20 male spindle. Includes 2" (51 mm) diameter locking-type disc pad.
Model 51823 – 12,000 RPM
Model 51824 – 15,000 RPM
Model 51825 – 20,000 RPM
• 3/8"-24 male spindle. Includes 2" (51 mm) diameter PSA-type disc pad.
2" (51 mm) Diameter, Rear Exhaust
Optional 01462
Safety-Lock Throttle
is available.
Air passage continually
cools gear box to reduce
wear and heat build-up.
One piece spindle
keeps all rotating
components on the
same centerline to
reduce runout.
ight
e He m)
n
i
l
r
te
Cen 8" (60 m
2-3/
Model 52520 – 12,000 RPM
Model 52521 – 15,000 RPM Replaces Model 50128
Model 52522 – 20,000 RPM Replaces Model 50129
• 1/4"-20 male spindle. Includes 2" (51 mm) diameter locking-type disc pad.
Model 52523 – 12,000 RPM
Model 52524 – 15,000 RPM Replaces Model 50104
Model 52525 – 20,000 RPM Replaces Model 50105
• 3/8"-24 male spindle. Includes 2" (51 mm) diameter PSA-type disc pad.
2" (51 mm) Diameter, Rear Exhaust
with 94535 Muffler Assembly
NEW
ht
Heig
rline mm)
e
t
n
Ce 8" (60
2-3/
Optional 01462 Safety-Lock
Throttle is available.
H
TECPS
TI
2
Dynaswivel air line
connector is ideal for
use with most air tools.
Model 52540 – 12,000 RPM
Model 52541 – 15,000 RPM
Model 52542 – 20,000 RPM
Model 52543 – 12,000 RPM
Model 52544 – 15,000 RPM
Model 52545 – 20,000 RPM
• 1/4"-20 male spindle.
Includes 2" (51 mm) diameter
locking-type disc pad.
• 3/8"-24 male spindle.
Includes 2" (51 mm) diameter
PSA-type disc pad.
Optional 94994 Overhose Assembly may be used to further reduce noise levels by as much as
5 dB(A). Overhose redirects exhaust away from operator and workpiece. Air line sold separately.
H
TECPS
TI
The use of a filter-regulator-lubricator
will increase performance, extend tool
life and lessen repair costs.
Abrasive Capacity:
3" Diameter Disc Sanders
3" (76 mm) diameter discs.
3" (76 mm) Diameter, Front Exhaust
NEW
ight
e He
erlin mm)
t
n
e
C
" (60
2-3/8
Optional 01462 Safety-Lock
Throttle is available.
Model 51830 – 12,000 RPM
Model 51831 – 15,000 RPM
Model 51832 – 20,000 RPM
• 1/4"-20 male spindle. Includes 3" (76 mm) diameter locking-type disc pad.
Model 51833 – 12,000 RPM
Model 51834 – 15,000 RPM
Model 51835 – 20,000 RPM
• 3/8"-24 male spindle. Includes 3" (76 mm) diameter locking-type disc pad.
3" (76 mm) Diameter, Rear Exhaust
Optional 01462
Safety-Lock Throttle
is available.
Model 52530 – 12,000 RPM
Model 52531 – 15,000 RPM
Model 52532 – 20,000 RPM
ht
Heig
rline mm)
e
t
n
Ce 8" (60
2-3/
• 1/4"-20 male spindle. Includes 3" (76 mm) diameter locking-type disc pad.
Model 52533 – 12,000 RPM
Model 52534 – 15,000 RPM
Model 52535 – 20,000 RPM
• 3/8"-24 male spindle. Includes 3" (76 mm) diameter locking-type disc pad.
3" (76 mm) Diameter, Rear Exhaust
with 94535 Muffler Assembly
NEW
t
Heigh
)
erline
Cent " (60 mm
2-3/8
Model 52553 – 12,000 RPM
Model 52554 – 15,000 RPM
Model 52555 – 20,000 RPM
• 1/4"-20 male spindle.
Includes 3" (76 mm) diameter
locking-type disc pad.
• 3/8"-24 male spindle.
Includes 3" (76 mm) diameter
locking-type disc pad.
Optional 94994 Overhose Assembly may be used to further reduce noise levels by as much as
5 dB(A). Overhose redirects exhaust away from operator and workpiece. Air line sold separately.
Optional 01462 Safety-Lock
Throttle is available.
Model
Numbers
Model 52550 – 12,000 RPM
Model 52551 – 15,000 RPM
Model 52552 – 20,000 RPM
Length
Inch (mm)
Height
Inch (mm)
Weight
Pound (kg)
Spindle
Thread
Air Flow Rate
SCFM (LPM)
Sound
Level
Motor
HP (W)
Air Inlet
Thread
Hose I.D.
Inch (mm)
Air Pressure
PSI (Bars)
51820 - 51825
6" (152)
3-1/4" (83)
1.1 lbs. (.5)
1/4"-20 or 3/8"-24 male
21 (595)
87 dB(A)
.43 (321)
1/4" NPT
3/8" (9.5 mm)
90 (6.2)
51830 - 51835
6-1/2" (165)
3-1/4" (83)
1.1 lbs. (.5)
1/4"-20 or 3/8"-24 male
21 (595)
87 dB(A)
.43 (321)
1/4" NPT
3/8" (9.5 mm)
90 (6.2)
52520 - 52525
7-3/8" (187)
3-1/8" (79)
1.2 lbs. (.54)
1/4"-20 or 3/8"-24 male
21 (595)
85 dB(A)
.43 (321)
1/4" NPT
3/8" (9.5 mm)
90 (6.2)
52530 - 52535
7-3/8" (187)
3-1/8" (79)
1.2 lbs. (.54)
1/4"-20 or 3/8"-24 male
21 (595)
85 dB(A)
.43 (321)
1/4" NPT
3/8" (9.5 mm)
90 (6.2)
52540 - 52545
6" (152)
3-1/4" (83)
1.1 lbs. (.5)
1/4"-20 or 3/8"-24 male
21 (595)
82 dB(A)
.43 (321)
1/4" NPT
3/8" (9.5 mm)
90 (6.2)
52550 - 52555
6-1/2" (165)
3-1/4" (83)
1.1 lbs. (.5)
1/4"-20 or 3/8"-24 male
21 (595)
82 dB(A)
.43 (321)
1/4" NPT
3/8" (9.5 mm)
90 (6.2)
2" (51 mm) & 3" (76 mm) Diameter Pads & Abrasive Discs
PSA-Type
Quick-Lock ® Locking-Type Disc Pads
50109
2" Pad
• 3/8"-24 female thread.
• 20,000 RPM maximum.
• Medium density pad.
PSA-Type Aluminum Oxide
Abrasive Discs
Disc
Abrasive Grit
Diameter
80
120
2" (51 mm) 92040
92046
Unit = 500 Discs.
2" Pad
3" Pad
2" (51 mm) & 3" (76 mm) Diameter
Locking-Type Pads
Pad
Part
Density Female
Diameter Number
Thread
2" (51 mm) 50171 Medium 1/4"-20
Locking-Type Ceramic Coated
Aluminum Oxide Abrasive Discs
Disc
Abrasive Grit
Diameter
60
80
RPM
M.O.S.
30,000
2" (51 mm)
50172
Hard
1/4"-20
30,000
2" (51 mm)
50176
Medium
3/8"-24
30,000
2" & 3" Unit = 200 Discs.
2" (51 mm)
50177
Hard
3/8"-24
30,000
3" (76 mm)
50181
Medium
1/4"-20
20,000
120
2" (51 mm)
92027
92028
92029
3" (76 mm)
92031
92032
92033
3" (76 mm)
50182
Hard
1/4"-20
20,000
Locking-Type Non-Woven Nylon Abrasive Discs
Disc
Super
Very Medium Coarse
Diameter Fine
Fine
3" (76 mm)
50186
Medium
3/8"-24
20,000
2" (51 mm) 90875
90874
90873
90872
3" (76 mm)
50187
Hard
3/8"-24
20,000
3" (76 mm) 90879
90878
90877
90876
2" Discs: Unit = 200 Discs. 3" Discs: Unit = 100 Discs.
3
Abrasive Capacity:
Die Grinders
Carbide burrs, rotary files, mounted points and wheels, 2" disc pads using threaded adapter.
Ideal for hard-to-reach areas.
1/4" or 6 mm Collet, Front Exhaust
NEW
ht
Heig
line mm)
r
e
t
Cen 6" (52
1
2-1/
Optional
01462
Safety-Lock
Throttle is
available.
Low profile collet body is
integral to spindle shaft.
1/4" or 6 mm Collet, Rear Exhaust
Optional 01462 Safety-Lock
Throttle is available.
1/4" or 6 mm Collet, Rear Exhaust
Optional 01462 Safety-Lock
Throttle is available.
t
Heigh
)
erline
Cent " (52 mm
6
1
/
1
2
Low profile collet body is integral to spindle shaft.
• Includes 01485 Collet Insert.
Model 51803 – 12,000 RPM (6 mm)
Model 51804 – 15,000 RPM (6 mm)
Model 51805 – 20,000 RPM (6 mm)
• Includes 01497 Collet Insert.
collet inserts can be
ordered to complement
the versatility of your die
grinder. Spindle mounted
pads are available to
easily convert your die
grinder into a disc sander.
• Includes 01485 Collet Insert.
Low profile collet body is
integral to spindle shaft.
NEW
Model 51800 – 12,000 RPM (1/4")
Model 51801 – 15,000 RPM (1/4")
Model 51802 – 20,000 RPM (1/4")
Model 50000 – 12,000 RPM (1/4")
Model 50001 – 15,000 RPM (1/4") Replaces Model 50052
Model 50002 – 20,000 RPM (1/4") Replaces Model 50053
eight
line H m)
r
e
t
n
Ce 6" (52 m
2-1/1
with 94535 Muffler Assembly
Standard
H
1/8")
TECPS (1/4",
or metric
I
T
(6 mm, 3 mm)
Model 50003 – 12,000 RPM (6 mm)
Model 50004 – 15,000 RPM (6 mm) Replaces Model 50058
Model 50005 – 20,000 RPM (6 mm) Replaces Model 50059
• Includes 01497 Collet Insert.
Model 52315 – 12,000 RPM
Model 52316 – 15,000 RPM
Model 52317 – 20,000 RPM
Model 52318 – 12,000 RPM
Model 52319 – 15,000 RPM
Model 52320 – 20,000 RPM
(All 1/4" Collet)
(All 6 mm Collet)
• Includes 01485 Collet Insert.
• Includes 01497 Collet Insert.
Optional 94994 Overhose Assembly may be used to further reduce noise levels by as much as
5 dB(A). Overhose redirects exhaust away from operator and workpiece. Air line sold separately.
Model
Numbers
Length
Inch (mm)
Height
Inch (mm)
Weight
Pound (kg)
Air Flow Rate
SCFM (LPM)
Sound
Level
Motor
HP (W)
Air Inlet
Thread
Hose I.D.
Inch (mm)
Air Pressure
PSI (Bars)
50000 - 50005
7-3/8" (187)
2-7/8" (71)
1.2 lbs. (.54)
21 (595)
85 dB(A)
.43 (321)
1/4" NPT
3/8" (9.5 mm)
90 (6.2)
51800 - 51805
5-3/4" (146)
2-3/4" (70)
1.1 lbs. (.5)
21 (595)
87 dB(A)
.43 (321)
1/4" NPT
3/8" (9.5 mm)
90 (6.2)
52315 - 52320
5-3/4" (146)
2-3/4" (70)
1.1 lbs. (.5)
21 (595)
82 dB(A)
.43 (321)
1/4" NPT
3/8" (9.5 mm)
90 (6.2)
Carbide Burr Kits
Abrasive/Pad Trial Paks
• 8 piece kit in a high-quality wooden case.
• Mounts to a 1/4" or 6 mm collet on any standard die grinder.
Includes locking-type pads and an assortment of coated and non-woven nylon
discs for grinding, cleaning, coatings removal, deburring, surface conditioning.
93350 1/4" Dynaburr TM
Carbide Burr Kit
93380 6 mm Dynaburr TM
Carbide Burr Kit
1/8" and
3mm kits
available.
All carbide
burrs may
be ordered
separately.
Disc
Diameter
Female
Thread
Pak Part
Number
2" (51 mm)
1/4" - 20
90800
2" (51 mm)
3/8" - 24
90801
3" (76 mm)
1/4" - 20
90802
3" (76 mm)
3/8" - 24
90803
Pad Assemblies
Threaded Adapter
Collet Inserts
Includes Locking-Type Pad with Shank
Model 50103
Model 50164
2" (51 mm) Medium Pad
(50171 – 1/4"-20) with 50103 Shank
• Has 1/4" diameter shank,
1/4" - 20 male thread
01485 – 1/4"
01497 – 6 mm
Model 50165
2" (51 mm) Hard Pad
(50172 – 1/4"-20) with 50103 Shank
• Mounts to 1/4" collets
4
• Wrench Flats: 7/16"
01495 – 1/8"
01496 – 3 mm
Depressed Center Wheel Grinders
Abrasive Capacity:
2" (51 mm) Type 27 bonded wheels.
Great for precision grinding small welds.
2" (51 mm) Diameter, Front Exhaust
NEW
ight
e He
terlin 52 mm)
n
e
C
6" (
2-1/1
Optional
01462
Safety-Lock
Throttle is
available.
Model 51827 – 12,000 RPM
Model 51828 – 15,000 RPM
Model 51829 – 20,000 RPM
• 50041 Guard and 50081 wheel flange included.
• Includes 24 grit 90999 Depressed Center Wheel, 2" (51 mm)
diameter x 3/8" (9 mm) diameter center hole.
• 90999 abrasive wheel sold separately.
2" (51 mm) Diameter, Rear Exhaust
Model 50727 – 12,000 RPM
Model 50728 – 15,000 RPM
Model 50729 – 20,000 RPM
Optional 01462 Safety-Lock
Throttle is available.
H
TECPS
TI
• 50041 Guard and 50081 wheel flange
included.
ight
ine He
Centerl (52 mm)
"
2-1/16
• Includes 24 grit 90999 Depressed
Center Wheel, 2" (51 mm) diameter x
3/8" (9 mm) diameter center hole.
Motor Tune-Up
Kits are
available to
keep your tool
in tip-top shape. (See pg. 7)
• 90999 abrasive wheel sold separately.
2" (51 mm) Diameter, Rear Exhaust
Model 52710 – 12,000 RPM
Model 52711 – 15,000 RPM
Model 52712 – 20,000 RPM
with 94535 Muffler Assembly
t
eigh
ne H mm)
i
l
r
e
t
Cen 16" (52
2-1/
NEW
Optional
01462
Safety-Lock
Throttle is
available.
• 50041 Guard and 50081 wheel flange included.
• 90999 abrasive wheel sold separately.
Optional 94994 Overhose Assembly may be used to further reduce noise levels by as much as
5 dB(A). Overhose redirects exhaust away from operator and workpiece. Air line sold separately.
Model
Numbers
Length
Inch (mm)
Height
Inch (mm)
Weight
Pound (kg)
Spindle
Thread
Air Flow Rate
SCFM (LPM)
Sound
Level
Motor
HP (W)
Air Inlet
Thread
Hose I.D.
Inch (mm)
Air Pressure
PSI (Bars)
50727 - 50729
7-3/8" (187)
2-7/8" (71)
1.4 lbs. (.63)
1/4"-20 or 3/8"-24 male
21 (595)
85 dB(A)
.43 (321)
1/4" NPT
3/8" (9.5 mm)
90 (6.2)
51827 - 51829
6-1/4" (159)
3" (76)
1.1 lbs. (.5)
1/4"-20 or 3/8"-24 male
21 (595)
87 dB(A)
.43 (321)
1/4" NPT
3/8" (9.5 mm)
90 (6.2)
52710 - 52712
6-1/4" (159)
3" (76)
1.1 lbs. (.5)
1/4"-20 or 3/8"-24 male
21 (595)
82 dB(A)
.43 (321)
1/4" NPT
3/8" (9.5 mm)
90 (6.2)
Depressed Center Wheel
Aluminum Oxide Type 27
2" (51 mm) Diameter
Disc
Diameter
2" (51 mm)
Grit
Center
Hole Dia.
Part
Number
24
3/8" (6 mm)
90999
Important: Never mount accessories that have lower maximum
RPM rating than the tool, regardless of tool capacity. Never mount
bonded grinding wheels. Always wear eye, face & body protection.
Unit = 30 Wheels.
H
TECPS
TI
Dynaswivel air line
connector is ideal for
use with most air tools.
H
TECPS
TI
The use of a filter-regulator-lubricator
will increase performance, extend tool
life and lessen repair costs.
5
Drills
1/4" Chuck, Front Exhaust
Model 51846 – 12,000 RPM
Model 51847 – 15,000 RPM
Model 51848 – 20,000 RPM
NEW
• Includes 53032 chuck.
1/4" Chuck, Rear Exhaust
Model 53046 – 12,000 RPM
Model 53047 – 15,000 RPM
Model 53048 – 20,000 RPM
with 94535 Muffler Assembly
NEW
• Includes 53032 chuck.
Optional 94994 Overhose Assembly may be used to further reduce noise levels by as much as
5 dB(A). Overhose redirects exhaust away from operator and workpiece. Air line sold separately.
Model
Numbers
Length
Inch (mm)
51846 - 51848
5-3/4" (146)
53046 - 53048
5-3/4" (146)
Height
Inch (mm)
4" (101.6)
4-1/4" (108)
Weight
Pound (kg)
Air Flow Rate
SCFM (LPM)
Sound
Level
Motor
HP (W)
Air Inlet
Thread
Hose Size
Inch (mm)
Air Pressure
PSI (Bars)
1.4 lbs. (.63)
21 (595)
87 dB(A)
.43 (321)
1/4" NPT
3/8" (9.5 mm)
90 (6.2)
1.1 lbs. (.5)
21 (595)
82 dB(A)
.43 (321)
1/4" NPT
3/8" (9.5 mm)
90 (6.2)
Drill Chuck and Mated Key
Chuck
Size
Female
Thread
Chuck Part
Number
Key Part
Number
1/4"
3/8" - 24
53032
53052
(Key included with drill chuck.)
A b r a s i v e / P a d Tr i a l P a k s
Featuring New Quick-Lock Pads
Includes locking-type pads and an assortment of coated and
non-woven nylon discs for grinding, cleaning, coatings removal,
deburring, surface conditioning.
Disc
Diameter
Female
Thread
Pak Part
Number
Disc
Diameter
Female
Thread
Pak Part
Number
2" (51 mm)
1/4" - 20
90800
3" (76 mm)
1/4" - 20
90802
2" (51 mm)
3/8" - 24
90801
3" (76 mm)
3/8" - 24
90803
2" Pad Trial Pak
3" Pad Trial Pak
Pad Assemblies
Threaded Adapter
Includes Locking-Type Pad with Shank
Model 50103
Model 50164
• Has 1/4" diameter shank, 1/4" - 20 male thread
2" (51 mm) Medium Pad (50171 – 1/4"-20) with 50103 Shank
• Mounts to 1/4" collets
Model 50165
2" (51 mm) Hard Pad (50172 – 1/4"-20) with 50103 Shank
6
• Wrench Flats: 7/16"
Accessories
Easy Gear Lubrication!
95848 Gear Oil
Apply 3 plunges
into lubrication
fitting every
8 hours of
operation.
• 95848 Gear Oil and 95541 Grease/Oil Gun are included with each tool purchase.
Expect a
gear life of
500 hours
minimum,
with proper
lubrication.
95848 Gear Oil 2.5 oz. (74 ml) tube
• Formulated for Dynabrade geared tools utilizing a wick-type lubrication system.
• Easy to apply using Dynabrade P/N 95541 Oil Gun. Apply 3 plunges
every 8 hours of operation into tools lubrication fitting.
Important Maintenance Note: Apply 3 plunges into lubrication fitting (see photo
on the right) every 8 hours of operation. Failure to lubricate with 95848 Dynabrade
Gear Oil will cause premature gear failure and void warranty. DO NOT USE any
other type of gear lubricant in these tools.
95541 Push-type Oil Gun
Dynabrade Air Lube
96179 Motor Tune-Up Kit
Air line lubrication products for better tool
performance and to help reduce downtime.
Keep your right angle tool
in tip-top shape.
• Formulated for pneumatic equipment.
• Absorbs up to 10% of its weight in water.
• Reduces downtime and lessens repair expense.
• Prevents rust and formation of gum/sludge for
extended tool operation.
• Includes assorted parts necessary
to maintain tool.
Dynabrade Air Lube (10W/NR)
95821: 4 oz. (118 ml). 95842: 1 pt. (473 ml).
Swivel Air Line Hoses
95843:
1 gal. (3.8 l).
• Eliminates kinking.
W!
NE
• Tough, flexible and lightweight.
• Fittings swivel 360° for easy use.
Hose
O.D.
Hose
I.D.
Length
Description
Part
Number
3/8"
1/4"
3 ft.
1/4" female to 1/4" male
96222
3/8"
1/4"
6 ft.
1/4" female to 1/4" male
96223
3/8"
1/4"
Custom
Hose by the foot (no fittings).
Order fittings separately, if desired.
96224
Fittings
Hose Diameter
Description
Part Number
3/8"
1/4" NPT female
96228
3/8"
1/4" NPT male
96229
Dynabrade Air Line Filter-Regulator-Lubricator
Our Filter-Regulator-Lubricator is a cost effective solution for air supply & vacuum/exhaust systems.
11405: 40 SCFM (1,133 LPM) @ 100 PSI (6.9 Bars). Has 3/8" NPT female ports.
11411: Up to 55 SCFM (1,558 LPM) @ 100 PSI (6.9 Bars). Has 1/2" NPT female ports.
Features
• Provides accurate air pressure regulation, two-stage filtration of water/contaminants and micro-mist
lubrication of pneumatic components.
New Modular
Design Allows For
Customization and
Versatility!
• Maximum 150 PSI @ 175°F or less for both models.
Important: All Dynabrade tools must be used with filter-regulator-lubricator to maintain all warranties.
7
Accessories (Cont.)
Dynaswivel ® Air Line Connector
Model 94300
Improved air flow up to 33 SCFM (935 LPM).
Features
• New lightweight, non-marring composite construction;
industrial quality.
The
Solution
• Patented “universal-joint” connects portable air tools to
an air line.
It
Swivels !
360°
At Two
Locations
• Swivels 360° AT TWO PIVOT POINTS allowing the air
hose to drop directly to the floor while providing superb
tool handling.
• 96177 Dynaswivel Display Pak available. Includes
countertop-type display box and ten 94300 Dynaswivel
Air-Line Connectors.
94300 – 1/4" NPT
94994 Overhose Assembly
• Optional Overhose Assembly may be used to further reduce noise
levels by as much as 5 dB(A).
• Overhose redirects exhaust away from operator and workpiece.
• Air line sold separately.
Ask about our custom shrouds for
dust-free vacuum applications!
DISTRIBUTED BY:
®
DYNABRADE, INC.
8989 Sheridan Drive • Clarence, New York 14031-1490
Phone: (716) 631-0100 • Fax: 716-631-2073
US Consumers Call Toll Free: 1-800-828-7333
DYNABRADE INTERNATIONAL
8989 Sheridan Drive • Clarence, New York 14031-1490
Phone: (716) 631-0100 • Fax: 716-631-2524
Canadian Consumers Call Toll Free: 1-800-344-1488
DYNABRADE EUROPE S.à r. l.
Zone Artisanale • L-5485 Wormeldange—Haut,
Luxembourg
Telephone: 352 76 84 94 1 • Fax: 352 76 84 95 1
© DYNABRADE, INC., 2000
Try Our New U.S. Consumer Toll Free Number: 1-888 DYNABRADE
PRINTED IN U.S.A.