CouvPDF.qxd
21/12/04
17:32
Page 1
➔
2005
EDITION
Terracotta Roofing Book
PLAIN TILES
INTERLOCKING TILES
BARREL TILES
MEDITERRANEAN TILES
OUTSTANDING TILES
LAMBERT
TBF
GUIRAUD
•03CatalogueAngTP.qxd
21/12/04
10:57
Page 1
21/12/04
10:57
Page 2
Genuine clay plain tiles help to blend new or renovated buidings
with local architecture and contribute to increase the real estate
value. They also bring incomparable rhythm and volume to the roof,
thanks to their slight camber. These traditional shapes are also
appreciated because they block water ingress by capillarity.
As the European leader in plain tiles, Terreal is able to answer to
all the specifications of this traditional market.
P.18/19
P.20/21
P.22/23
P.24/25
P.26/27
P.28/31
P.32/35
P.36/39
P.40/41
P.42/43
P.44/45
P.46/47
P.48/49
P.50/53
P.54/57
P.58/61
P.62/63
P.64/65
P.66/67
Please Note: The minimum-pitch and ventilation
recommendations of the following pages are only
applicable in the United Kingdom and in the Republic
of Ireland. For projects out of the British Islands, please
contact your local Terreal distributor and refer to
the French Clay-Tile Laying Standards (ref. DTU 40.23).
Please contact us for further details regarding these
standards:
[email protected]
Plain Tiles
•03CatalogueAngTP.qxd
The Plain Tile Range
The Plain Tile Common Accessories
The Plain Tile Colours
Mixing Colours
Bocage TBF
Élysée Lambert
Éminence Lambert
Grand Cru Lambert
Grand Cru Bullnose Lambert
Héritage TBF
Meursault Lambert
Monuments Historiques Plain Tile TBF
Périgord TBF
Pommard Lambert
Priory Lambert
Rustique Lambert
Ségala Guiraud
Sologne Guiraud
Ségala and Sologne Old Country Guiraud
•03CatalogueAngTP.qxd
21/12/04
10:57
Page 3
The Plain Tile Range
PLAIN TILE
The Plain Tile Range
Format (mm)
Gauge
Curve(1)
Finish
Fixation
Accessories(2)
200 x 300 x 13
(43 to 48)
Regular
L+
Engobed
smooth
1 holding bar
2 nail holes
1
2
270 x 350 x 13
(26 to 28)
Regular
W+
L
Engobed
smooth
2 nibs
2 nail holes
1
2
170 x 270 x 11
(59 to 65)
Regular
W
L
Engobed
smooth
2 nibs
2 nail holes
1
2
3
170 x 270 x 12
(59 to 65)
Regular
W
L
Sandfaced
2 nibs
2 nail holes
1
2
3
170 x 270 x 12
(59 to 65)
Regular
Bullnose
W
L
Sandfaced
2 nibs
2 nail holes
1
2
3
180 x 280 x 15
(53 to 58)
Irregular
L+
Engobed
smooth
1 holding bar
2 nail holes
1
2
180 x 386 x 16
(36 to 38)
Regular
Bullnose
—
Smooth /
Sandfaced
2 nibs
2 nail holes
1
2
180 x 280 x 15
(53 to 58)
Irregular
W
L+
Sandfaced with
relief effects
1 holding bar
2 nail holes
1
180 x 280 x 13
(53 to 58)
Regular
L+
Engobed
smooth
1 holding bar
2 nail holes
1
2
170 x 270 x 14
(59 to 65)
Regular
W+
L
Sandfaced
2 nibs
2 nail holes
1
2
3
(tiles per sq.m.)
Bocage
TBF
(P. 26)
Élysée
LAMBERT
(P. 28)
Éminence
LAMBERT
(P. 32)
Grand Cru
LAMBERT
(P. 36)
Grand Cru
Bullnose
LAMBERT
(P. 40)
Héritage
TBF
(P. 42)
Meursault
LAMBERT
(P. 44)
Monuments
Historiques
PLAIN TILE
TBF
(P. 46)
Périgord
TBF
(P. 48)
Pommard
LAMBERT
(P. 50)
18
21/12/04
10:57
Page 4
Format (mm)
Gauge
Curve(1)
Finish
Fixation
Accessories(2)
170 x 270 x 15
(59 to 65)
Irregular
W+
L
Sandfaced
2 nibs
2 nail holes
1
2
3
170 x 270 x 11
(59 to 65)
Regular
W
L
Sandfaced
2 nibs
2 nail holes
1
2
3
200 x 300 x 13
(43 to 48)
Regular
L+
Engobed
smooth
1 holding bar
2 nail holes
1
2
200 x 300 x 16
(43 to 48)
Irregular
L+
Engobed with
relief effects
1 holding bar
2 nail holes
1
2
170 x 280 x 11
(56 to 62)
Regular
L+
Engobed
smooth
1 holding bar
2 nail holes
1
2
170 x 280 x 16
(59 to 62)
Irregular
L+
Engobed with
relief effects
1 holding bar
2 nail holes
1
2
(tiles per sq.m.)
Priory
LAMBERT
(P. 54)
Rustique
LAMBERT
(P. 58)
Ségala
GUIRAUD
(P. 62)
Ségala Old
Country
GUIRAUD
(P. 66)
The Plain Tile Range
•03CatalogueAngTP.qxd
Sologne
GUIRAUD
(P. 64)
Sologne Old
Country
GUIRAUD
(P. 66)
(1) Curve
W = across the width
W+ = strongly curved across the width
L = along the length
L+ = strongly curved along the length
(2) Accessories
1 = bedded or mortared
2 = dry-laid
3 = laying with regional variations (traditions)
Monuments Historiques Plain Tile - Mixing of Ebony, Brown Black and Brown Violet colours
19
•03CatalogueAngTP.qxd
21/12/04
10:58
Page 5
The Plain Tile Common Acc e
Common Accessories to Lambert Plain Tiles
200
200
400
330
250
34 XLP
250
1/2 round ridge - 3 per m. -
3.1 kg.
33 XLP
3.1 kg.
366 XL Overlapping ventilated
Interlocking ventilated
1/2 round ridge end (pediment) - 3.4 kg. 1/2 round ridge end (pediment) - 3.4 kg.
120
260
270
41
0
185
250
36 XL
120
330
330
220
220
Angular ridge - 3 per m. -
41
0
Interlocking ventilated
1/2 round ridge - 4.5 kg.
250
250
185
185
220
31 XL
185
185
330
0
25
The Plain Tile
Common Accessories
PLAIN TILE
250
1/2 round ridge end
(pediment) - 4.1 kg.
362 XLP
Angular ridge end
(pediment) - 3.7 kg.
260
170
180
250
365 XLP
434 XLP
453 XLP
Tapered hip (small
model) - 1 kg.
Tapered hip end (small
model) - 1.8 kg.
472 XLP 1/2 round ridge / 2 hog’s
back hip junction(1) - 4.5 kg.
210
260
0
25
471 XLP 1 angular ridge / 2 hog’s
back hip junction(1) - 3.7 kg.
63 XL
Lantern Ø 100 - 1.3 kg.
Common Accessories to TBF Plain Tiles
100
33
9
31
0
30
0
362 XTP Angular ridge end
(pediment) - 4 kg.
365 XTP 1/2 round ridge end
“Val de Loire” (pediment) - 4 kg.
0
18
12
5
0
25
0
26
0
26
33 XTP Angular ridge (section
25 cm2) - 3 kg.
18
4
25
0
34 XTP 1/2 round ridge
434 XTP Ridge or round hip tile
“Val de Loire” - 3 per m. - 3.3 kg. 400 mm - 2.05 kg.
26
0
Hog’s back hip/verge
tile for bedding - 1.6 kg.
453 XTP
Round hip end
400 mm - 1 kg.
Dimensions in mm are outside dimensions.
(1) Available upon order.
(2) Available in Natural Red and Brown colours only.
20
0
40
170
454 XTP
Hog’s back hip end
(or corner hip end).
0
17
20 XTP
100
433 XTP Hog’s back hip tile
(or corner hip tile).
90
300
90
125
0
30
7
38
0
34
21/12/04
10:58
Page 6
c essories
Common Accessories to Guiraud Plain Tiles
130
250
0
44
230
34 XGP 1/2 round ridge 3 per m - 3.8 kg.
220
311 XG Slate-style ridge(2) 2.5 per m.
130
170
11
0
40
0
50
43
0
33
0
90
170
210
33 XGP Angular ridge 2.9 per m - 3.2 kg.
70
1 CL Languedocienne barrel
tile - 2.5 per m - 2.6 kg.
1 CV Vendéenne barrel tile 3.4 per m - 1.5 kg.
11
0
130
290
120
280
300
120
0
50
180
170
1 CG
Girondine barrel tile 2.5 per m - 1.9 kg.
43 XGP
190
43 XGV
Hog’s back hip 432 XGP Hog’s back hip tile
tile for bedding (or corner hip tile). (new model).
455 XGP Hog’s back hip end
(new model).
20 P20 20 V20 Universal flat
verge tile for bedding.
The Plain Tile
Common Accessories
•03CatalogueAngTP.qxd
56
0
80
200
45 XG Languedocienne barrel
hip end - 3.5 kg.
49 XG
Finial ridge ornament
Ø 240.
Élysée - Colour: Flamed Red
46 XG
66 XG
Lantern Ø 150 - 3.8 kg. 3.7 kg.
77 XG Ventilation metal
flashing VM880 - 2 metre strip.
3-way junction Ø 430 -
47 XG
4-way junction Ø 430 -
3.5 kg.
48 XG
Cone ridge ornament
Ø 190.
64 XG Extension pipe Ø 100 67 XG Extension pipe Ø 150 h = 400 - 3.7 kg.
h = 400 - 6 kg.
Priory - Colour: Dark Antique
21
•03CatalogueAngTP.qxd
21/12/04
10:59
Page 7
The Plain Tile Colours
Colours of Lambert Plain Tiles
Colours of Guiraud Plain Tiles
W
NE
CO
R
LOU
Burgundy Sandfaced Burgundy Sandfaced Champagne Sandfaced Champagne Sandfaced Champagne Sandfaced
Chagny
Les Mureaux
Bavent
Chagny
Les Mureaux
Brown
Flamed Kings’
Valley
Flamed Red
Dark Antique
Bavent
Manor
Oldish Sologne
Tobacco
Flamed Red
Old Country
Dark Antique
Chagny
Dark Slate
Les Mureaux
Flamed Red
Chagny
Flamed Red
Les Mureaux
NE
W
The Plain Tile Colours
PLAIN TILE
CO
R
LOU
Heather
Bavent
Heather
Chagny
Natural Red
Chagny
Normandy Sandfaced Purple
Bavent
Chagny
Tobacco Graisé
Vieux Clocher
Sienna
Les Mureaux
Slate Sandfaced
Chagny
Straw
Bavent
Straw
Chagny
Manor
Old country
Vieux Clocher
Old Country
Tudor Brown
Les Mureaux
du
Pro
on
cti
es
Sit
wn
Bro
Tudor Brown
Chagny
d
ed
ace
f
au
c
lley
d
a
f
Va
âte
an
’
h
nd
S
s
d
e
a
C
g
u
e
ed
le n
in
at
th
cco
yS
ux
te
gn
tiq
he
er
nd
dK
dR
hB
pa
Ear
oba
An
Vie
Sla
s
w
T
e
e
h
u
i
t
m
k
l
d
g
t
k
k
k
m
m
a
r
r
r
r
c
a
e
g
h
Bu
Bu
Ch
En
Fir
Fla
Fla
Lig
He
Da
Da
Da
wn
Bro
L AMBERT
Élysée
Éminence
Grand Cru
Grand Cru Bullnose
Meursault
Pommard
Priory
Rustique
Les Mureaux
Les Mureaux
Chagny
Chagny
Chagny
Chagny
Chagny
Bavent
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
TBF
Bocage
Héritage
Périgord
Montpon
Montpon
Montpon
●
●
●
●
●
●
●
●
G UIRAUD
Ségala
Ségala Old Country
Sologne
Sologne Old Country
Le Ségala
Le Ségala
Le Ségala
Le Ségala
●
●
●
●
●
●
Colours may vary according to the shape of the selected product.
●
Commonly produced shade. ● Available upon order. Please contact our Sales Department for this colour.
(1) Available only with the Bavent plain tile model (1999-2004), for projects started in multirustic colour.
22
●
●
●
●
21/12/04
10:59
Page 8
The Plain Tile Colours
•03CatalogueAngTP.qxd
Colours of TBF Plain Tiles
Monuments Historiques Plain Tile
Buckwheat Brown
Light Tobacco
Dark Vieux Château
English Blend
Brown Black
Brown Violet
Ebony
Naturel Red
Orange Ochre
Red Violet
Salmon Red
Straw
White Ochre
Light Vieux Château Natural Red
Old Mill
Shaded Slate
Slate
Tobacco Brown
cco
Lig
h
ieu
tV
x
au
âte
Ch
no
Ma
r
nd
Sa
ed
fac
ne
ed
log
ic
y
t
R
o
d
s
l
S
l
u
al
an
e
Mi
i sh
ltir
rm
tur
rp l
Na
No
Old
Old
Mu
Pu
e
l at
dS
a
e
nn
ad
Sh
Sie
te
S la
ed
fac
nd
a
S
te
aw
S la
Str
n
sé
r
n
he
rai
row
G
B
row
loc
o
o
o
B
C
c
c
c
or
ac
ac
ac
ux
Tob
Tob
Tob
Tud
Vie
●
●
●
●
●
●
●
●
●
●
●(1)
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
23
•03CatalogueAngTP.qxd
21/12/04
10:59
Page 9
PLAIN TILE
Mixing Colours
Mixing Colours
Mixing several colours of the same plain tile model results in unique,
original and rustic roofs.
For even more sophisticated results, you can mix, in addition to colours,
different tile models of different thicknesses. For example, for tiles
of size 170 x 270 mm:
• Priory and Rustique models
• Grand Cru and Éminence models
• Grand Cru, Priory and Pommard models
• etc.
Mixing Techniques
1 Choose your tile model or models, respecting regional traditions.
2 Define the proportions of the colours to mix:
• The dominant colour must represent 50% to 85% of the total number of tiles, depending on the environment.
• The additional colours composing the mix-match either brighten or darken the general picture.
Proportions decrease (for instance 65%, 35%, 5%), and initiate the tone differences in tones observed
with rustic tiles.
3 Present a sample to the customer for validation.
4 Load the tiles onto the roof respecting the validated proportions, and lay them at random. Regularly check
that no “checkboard effect” appears.
5 Accessories are preferably chosen of the dominant colour of the mix.
24
Pommard
65% Champagne Sandfaced
35% Burgundy Sandfaced
5% Slate Sandfaced
Pommard
65% Burgundy Sandfaced
35% Champagne Sandfaced
5% Slate Sandfaced
Monuments Historiques
Plain Tile
60% Natural Red
35% Straw
5% Brown Violet
Monuments Historiques
Plain Tile
55% Orange Ochre
40% Natural Red
5% Brown Black
21/12/04
11:00
Page 10
Mixing Colours: Picture Gallery
There are almost infinite ways of mixing tiles and colours. Taking inspiration from traditional roofs around,
the experienced roofer will undoubtedly create a harmonious result.
Grand Cru
90% Burgundy Sandfaced
10% Champagne Sandfaced
Meursault
Mix of Natural Red
and Tudor Brown
Grand Cru
Mix of various colours
Grand Cru
60% Burgundy Sandfaced
40% Champagne Sandfaced
Mixing Colours
•03CatalogueAngTP.qxd
25
•03CatalogueAngTP.qxd
21/12/04
15:40
Page 11
PLAIN TILE
Bocage
TBF
Co
lou
r:
Da
rk
Vie
ux
Ch
ât
ea
u
Colour: Tobacco Brown
1 BG
The Rustic Look
of Old Roofs.
PLAIN TILE
Available in a wide range of aged
colours, the Bocage tile reflects
all the shades of ancient roofs typical
of South Western France. Its aspect
becomes even more rustic for models
with an irregular gauge.
26
Easy to Lay.
Thanks to its large size
(200 x 300 mm), the Bocage
tile is fast to install. Its holding
bar that spans across
the underside of the tile makes
it very stable, even after cuting.
ARCHITECT’S SPECIFICATION
The tiles will be plain, extruded clay plain tiles,
with the following format:
• Size: 200 x 300 mm.
• 43 to 48 tiles per sq.m. depending
on the overlap: 70 to 90 mm.
• With a full-width holding bar on the underside
to facilitate laying at singular points.
Overall dimensions (mm) 200 x 300 x 11
Unit weight (kg)
1.7
Gauge (mm)
115 110 105
Overlap (mm)
70
80
90
Tiles per sq.m.
43
45
48
Battens (ml/sq.m.)
8.7 9.1 9.5
Weight per sq.m.
74
77
81
Tiles per pallet (2)
540
Minimum pitch(1)
35° / 70%
Ventilation: see recommandations P. 193.
21/12/04
15:41
Page 12
COLOURS (3)
ACCESSORIES (4)
7
38
434 XTP Ridge or round hip tile
400 mm - 2.05 kg.
100
0
40
100
0
34
34 XTP 1/2 round ridge
“Val de Loire” - 3 per m. - 3.3 kg.
453 XTP Round hip end
400 mm - 1 kg.
0
26
0
26
25
0
0
25
0
18
18
4
31
0
30
0
33
9
TBF
Dark Vieux Château
33 XTP Angular ridge (section
25 cm2) - 3 kg.
365 XTP 1/2 round ridge end
“Val de Loire” (pediment) - 4 kg.
362 XTP Angular ridge end
(pediment) - 4 kg.
12
5
90
26
0
90
300
125
0
17
Buckwheat Brown
0
30
433 XTP
Hog’s back hip/verge
tile for bedding - 1.6 kg.
454 XTP
Hog’s back hip end
(or corner hip end).
120
120
290
290
120
201 BG
170
20 XTP
Hog’s back hip tile
(or corner hip tile).
120
202 BG
Left cloaked verge tile.
Right cloaked verge tile.
62 BG
63 XT
Lantern base Ø 100.
Lantern Ø 100.
200
200
20
0
30
0
Light Vieux Château
Shade Slate
65 BG
66 XT
Bocage
•03CatalogueAngTP.qxd
Lantern base Ø 150.
Lantern Ø 150.
83 BG
Eave and top
tile.
1 BGW Trapezoidal
Bocage(5). Variable weight.
61 BG Ventilation tile
(section 25 cm2).
Longitudinal Spacing
70 mm = distance between ridge top
and top of first batten
Old Mill
Top tile
115/110/105 mm gauge = exposed area of the tile
Light Tobacco
Gauge =
batten spacing
Tobacco Brown
215 mm = distance between
the top of the batten holding
the first full-sized tile
and the cant strip’s lower edge.
70/80/90 mm = overlap
40 mm = projection
of the tiles over the gutter
Slate
Overlap
False gauge
Gauge
90 80 70
105 110 115
105 110 115
Eave and top tile
300 300 300
See P. 223 for the conversion table (metric system to imperial system).
(1) See P. 194 for a complete table of minimum roof pitches.
(2) The number of tiles per pallet is indicative only.
All clay tile dimensions admit normative variations of ± 2%.
(3) See P. 22 for all available colours and P. 224 for colour description in French.
(4) Dimensions in mm are outside dimensions. See P. 20 for all TBF accessories.
(5) Available upon order.
60 mm = cant strip height
Gutter axis
27
•03CatalogueAngTP.qxd
21/12/04
15:41
Page 13
PLAIN TILE
Élysée
LAMBERT
Co
lou
r:
D
ar
kS
lat
e
Colour: Dark Slate
The Élysée Lambert is an innovative
product offering an excellent quality/price
ratio. It comes in four shades, including
the exclusive through-coloured Dark Slate.
As well as being truly modern, the Élysée
will perfectly adapt to traditional buildings.
Geometrically regular and always reliable,
Traditional Camber.
The Élysée tile is slightly cambered
both laterally and longitudinally,
thus conserving the traditional
appearance of fine plain tiles.
Its profile also prevents water from
coming up by capillary action,
thereby ensuring perfect weathertightness, even at low pitches.
Even Dimensions.
The Élysée tile is individually
fired to ensure absolute flatness
and excellent geometry.
Its large economical size will go
unnoticed thanks to the evenness
between the overlapping surface
and the exposed one.
it is quickly fitted on the roof thanks
to its large and economical format:
270 x 350 mm.
Aesthetically, the Élysée preserves the
proportions of a true plain tile, in particular thanks to the elegance of its thin
PLAIN TILE
bottom-edge.
28
•03CatalogueAngTP.qxd
21/12/04
15:41
Page 14
Flamed Red
Sienna
Dark Slate
Élysée
Champagne Sandfaced
LAMBERT
COLOURS (2)
Colour: Dark Slate
Colour: Flamed Red
Overall dimensions
Tiles per sq.m.
Minimum pitch(1)
Colour: Flamed Red
270 x 350 x13 mm
From 26 to 28
35° / 70%
ARCHITECT’S SPECIFICATION
The tiles will be pressed clay plain tiles,
with the following format:
• Size: 270 x 350 mm.
• 26 to 28 tiles per sq.m. depending on the overlap:
70 to 90 mm.
• A maximum thickness of 13 mm.
• Convex, or curved, along the length and the width
as well, to keep the aspect of traditional plain tiles.
(1) See P. 194 for a complete table of minimum roof pitches.
(2) See P. 224 for colour description in French.
29
•03CatalogueAngTP.qxd
21/12/04
15:41
Page 15
180
250
Angular ridge - 3 per m. -
4.5 kg.
434 XLP Tapered hip (small
model) - 1.9 kg.
Accessories
120
185
41
0
330
170
250
34 XLP
1/2 round ridge - 3 per m. -
3.1 kg.
453 XLP
Tapered hip end (small
model) - 1.8 kg.
200
613 EL Ventilation tile with
grating (section 25 cm2) - 3 kg.
170
150
201 EL
Left verge tile - 3.6 per m. -
2.8 kg.
170
130
150
635 EL Lantern base with cap
Ø 100 - 4.5 kg.
27
0
120
Ve r g e s
350
Hog’s back hip - 1.1 kg.
41
0
Ridges and Hips
185
330
432 EL
General Terracotta Accessories
Élysée
31 XL Interlocking ventilated
1/2 round ridge - 4.5 kg.
170
0
27
220
33 XLP
130
270
400
350
Ridges and Hips
PLAIN TILE
202 EL Right verge tile 3.6 per m. - 2.8 kg.
135
35
0
65 EL Lantern base with cap
Ø 150 - 5.7 kg.
5 EL
1/2 tile - 1.3 kg.
60
250
0
32
36 XL Interlocking ventilated
1/2 round ridge end (pediment) - 3.4 kg.
17
0
455 XLP
Hog’s back hip end - 1 kg.
1 ELW Trapezoidal Élysée.
Variable weight(1).
200
250
83 EL
240
366 XL Overlapping ventilated
1/2 round ridge end (pediment) - 3.4 kg.
463 XLP 1 ridge / 2 hog’s back hip
junction - 3.6 kg.
260
330
250
185
0
25
250
365 XLP
471 XLP 1 angular ridge / 2 hog’s
back hip junction(1) - 3.7 kg.
1/2 round ridge end
(pediment) - 3 per m. - 4.1 kg.
260
330
270
185
0
25
250
362 XLP
Angular ridge end
(pediment) - 3 per m. - 3.7 kg.
472 XLP 1/2 round ridge / 2 hog’s
back hip junction(1) - 4.5 kg.
851 EL 45° valley tile - 2.6 kg.
This accessory can only be laid on 45° pitched
roofs with slopes intersecting at a 90° angle.
270
PLAIN TILE
84 EL
23
0
Under ridge tile - 1.5 kg.
Colour: Flamed Red
Dimensions in mm are outside dimensions.
(1) Available upon order.
30
270
Eaves
240
21
0
Eave and top tile - 1.4 kg.
•03CatalogueAngTP.qxd
21/12/04
15:41
Page 16
35
0
mm
Élysée LAMBERT
Under-ridge tile
1 EL
27
0m
140/135/130 mm gauge = exposed area of the tile
Gauge =
batten spacing
230 mm = distance between
the top of the batten holding
the first full-sized tile
and the cant strip’s lower edge.
70/80/90 mm = overlap
±60 mm = projection
of the tiles over the gutter
Eave and top tile
40 mm = cant strip height
Gutter axis
Overlap
False gauge
Gauge
90 80 70
130 135 140
130 135 140
m
13 mm
Dimensions (mm)
270 x 350 x 13
Unit weight (kg)
Élysée
±12 mm = distance between ridge top
and top of first batten
LAMBERT
Longitudinal Spacing
2.5
Gauge (mm)
140 135 130
Overlap (mm)
70
80
90
Tiles per sq.m.
26
27
28
Battens (ml/sq.m.)
7.1
7.4
7.7
Weight per sq.m. (kg)
66
69
71
Tiles per pallet
504
(1)
Ventilation: see recommandations P. 193.
350 350 350
Overhanging Verge Tiles(2)
Angle-cut tile
(top and bottom cuts)
Mortar
50 mm
Angle-cut half-tile
(top and bottom cuts)
Cloaked Verge Tiles(2)
Verge tile
270
135
170
Fastener
Left verge
Right verge
Dimensions are indicated in mm.
See P. 223 for the conversion table (metric system to imperial system).
(1) The number of tiles per pallet is indicative only.
All clay tile dimensions admit normative variations of ± 2%.
(2) See P. 207 for further details.
31
•03CatalogueAngTP.qxd
21/12/04
15:41
Page 17
PLAIN TILE
Éminence
LAMBERT
Co
lou
r:
Fla
m
ed
Re
d
Colour: Champagne Sandfaced
L arge, bright, regular and harmonious
roofs shine with the use of Éminence,
Europe’s number one flat tile.
Éminence provides the consistency of a
tile made from very fine clay in state-ofthe-art production facilities. Its wide
range of harmonious colours (including
Easy to Fix.
With its two nailing holes,
the perfectly-dimensioned
Éminence tile is easy to cut,
steady and rapidly-fixed.
Even Dimensions.
Éminence roof tiles are made
from an excellent clay
and are individually fired flat,
which gives them exceptionally
regular geometry.
the exclusive Champagne Sandfaced)
guarantees Éminence will blend as harmoniously with contemporary residences as
with more traditional homes, maintaining
PLAIN TILE
every construction’s own identity.
32
•03CatalogueAngTP.qxd
21/12/04
15:41
Page 18
Flamed Red
Champagne Sandfaced
Sienna
Burgundy Sandfaced
Colour: Tudor Brown
Éminence
LAMBERT
COLOURS (2)
Colour: Champagne Sandfaced
Tudor Brown
Colour: Champagne Sandfaced
Overall dimensions
170 x 270 x11 mm
Tiles per sq.m.
59 / 62 / 65
Minimum pitch(1)
35° / 70%
ARCHITECT’S SPECIFICATION
The tiles will be pressed clay plain tiles,
with the following format:
• Size: 170 x 270 mm.
• 59 to 65 tiles per sq.m. depending on the overlap:
70 to 90 mm.
• Hollowed on the underside for better waterproofing.
(1) See P. 194 for a complete table of minimum roof pitches.
(2) See P. 224 for colour description in French.
33
•03CatalogueAngTP.qxd
21/12/04
15:42
Page 19
Interlocking ventilated
1/2 round ridge end (pediment) - 3.4 kg.
110
190
433 EM
Interlocking hog’s back
hip - 11 per m. - 1 kg.
120
270
130
821 EM
Left 822 EM Right wall
facing internal angle(1) - 1.3 kg.
60 130
170
823 EM
Left 824 EM Right wall
facing external angle(1) - 1.3 kg.
65
235
200
250
Accessories
41
0
200
30
0
180
220
366 XL Overlapping ventilated
1/2 round ridge end (pediment) - 3.4 kg.
434 XLP Tapered hip (small
model) - 3 per m. - 1 kg.
435 XLP Bonnet hip tile 11 per m. - 1.5 kg.
General Terracotta Accessories
220
36 XL
Hog’s back hip end - 1 kg.
170
170
270
250
200
16
0
455 XLP
Ridges and Hips
Interlocking ventilated
1/2 round ridge - 4.5 kg.
0
19
275
220
31 XL
Ridges and Hips
Éminence
60
10
3
400
0
27
Ridges and Hips
PLAIN TILE
613 EM Ventilation tile with
grating (section 35 cm2) - 1.7 kg.
65 EM Lantern base with cap
Ø 150 (3 tiles) - 6.2 kg.
62 EM Lantern base Ø 100
(3 tiles) - 3.5 kg.
120
260
185
41
0
330
90
250
250
63 XL
0
27
185
330
437 EM
90
130
130
330
202 EM Right cloaked verge tile 6 per m. - 1.9 kg.
18
0
185
160
Angular ridge - 3 per m. -
2.8 kg.
851 EM 45° valley tile - 11 per m.
- 1.5 kg. This accessory can only be laid on 45°
1 EMW Trapezoidal Éminence.
Variable weight(1).
85
pitched roofs with slopes intersecting at a 90° angle.
330
27
0
110
250
33 XLP
631 XL Ventilation cap for
lantern base Ø 100 - 1.5 kg.
45° close hip - 1.2 kg.
120
1/2 round ridge end
(pediment) - 4.1 kg.
120
201 EM Left cloaked verge tile 6 per m. - 1.9 kg.
200 200
365 XLP
Lantern Ø 100 - 1.3 kg.
110
60
Tapered hip end (small
model) - 1.8 kg.
160
3.1 kg.
453 XLP
Ve r g e s
1/2 round ridge - 3 per m. -
120
170
250
34 XLP
27
0
270
185
340
5 EM
1/2 tile - 0.5 kg.
170
250
474 XLP
1/2 round ridge / 2 tile
junction - 3.1 kg.
270
25
5
340
402 EM
0
40
Eaves
Angular ridge end
(pediment) - 3.7 kg.
0
18
362 XLP
Left tile and 1/2 - 1.6 kg.
83 EM
Eave and top tile - 0.7 kg.
200
392 XL Interlocking ventilated
1/2 round ridge end - 3.6 kg.
473 XLP 1 angular ridge / 2 tile
junction - 3 kg.
255
27
0
260
0
25
403 EM
0
40
200
393 XL Overlapping ventilated
1/2 round ridge end - 4.6 kg.
471 XLP 1 angular ridge / 2 hog’s
back hip junction(1) - 3.7 kg.
320
260
0
25
250
0
25
Sawtooth-style hog’s
back ridge - 4 per m. - 2.4 kg.
472 XLP
1/2 round ridge / 2 hog’s
back hip junction(1) - 4.5 kg.
100
T ERREAL’s plus
402 EM
403 EM
220
250
PLAIN TILE
334 EM
170
43 EM Hog’s back hip for
bedding - 11 per m. - 1 kg.
463 XLP 1 ridge / 2 hog’s back hip
junction - 3.6 kg.
Dimensions in mm are outside dimensions. (1) Available upon order.
34
Right tile and 1/2 - 1.6 kg.
For verges and hips, use left
or right tiles and a half.
They spare you the time spent
to cut and lay half-tiles.
•03CatalogueAngTP.qxd
21/12/04
15:42
Page 20
27
0
mm
Éminence LAMBERT
±60 mm = distance between ridge top
and top of first batten
1 EM
Top tile
170
100/95/90 mm gauge = exposed area of the tile
Gauge =
batten spacing
190 mm = distance between
the top of the batten holding
the first full-sized tile
and the cant strip’s lower edge.
70/80/90 mm = overlap
±60 mm = projection
of the tiles over the gutter
Eave and top tile
40 mm = cant strip height
Gutter axis
Overlap
False gauge
Gauge
90 80 70
90 95 100
90 95 100
mm
11 mm
Dimensions (mm)
170 x 270 x 11
Unit weight (kg)
1
Gauge (mm)
100
95
90
Overlap (mm)
70
80
90
Tiles per sq.m.
59
62
65
Battens (ml/sq.m.)
10
Weight per sq.m. (kg)
59
Tiles per pallet
Éminence
LAMBERT
Longitudinal Spacing
10.5 11.1
62
65
1,120
(1)
Ventilation: see recommandations P. 193.
270 270 270
Overhanging Verge Tiles(2)
Angle-cut tile
(top and bottom cuts)
Mortar
50 mm
Angle-cut half-tile
(top and bottom cuts)
Cloaked Verge Tiles(2)
Verge tile
170
85
170
Fastener
Left verge
Right verge
Dimensions are indicated in mm.
See P. 223 for the conversion table (metric system to imperial system).
(1) The number of tiles per pallet is indicative only.
All clay tile dimensions admit normative variations of ± 2%.
(2) See P. 207 for further details.
35
•03CatalogueAngTP.qxd
21/12/04
11:06
Page 21
PLAIN TILE
Grand Cru
LAMBERT
Co
lou
r:
B
Sa urgu
nd nd
fa y
ce
d
Colour: Burgundy Sandfaced
One of the most popular in its range of
classic tiles, the Grand Cru Lambert has
outstanding points: it is a quality product,
reliable and sturdy. Its rustic appeal and
wide range of colours make it a truly unique
plain tile.
The sandy colours used in the manufac-
Rich Colours.
The Grand Cru range is available
in 5 graduated shades (including the
sand-faced shades), offering a truly
exceptional palette of colours.
PLAIN TILE
Grand Cru tiles are recommended
in many British regions, for both new
and renovation projects.
36
A Benchmark
for Professionals.
ture of Grand Cru tiles are highly valued by
The Grand Cru tile has 2 strong nibs,
for ease of fixing on battens.
those who appreciate an attractive-looking
This light yet robust tile is beautifully
cambered and easy to cut, while the
wide range of accessories contributes
to a perfect finish and significant
timesaving on fitting.
house. With its thoroughly traditional
aesthetics, it presents all the benefits of
a modern tile.
•03CatalogueAngTP.qxd
21/12/04
11:06
Page 22
Burgundy Sandfaced
Champagne Sandfaced
Tudor Brown
Flamed Red
Colour: Burgundy Sandfaced
Grand Cru
LAMBERT
COLOURS (2)
Colour: Flamed Red trapezoidal tiles
Colour: Burgundy Sandfaced
Overall dimensions
Colour: Flamed Red
170 x 270 x12 mm
Tiles per sq.m.
59 / 62/ 65
Minimum pitch(1)
35° / 70%
ARCHITECT’S SPECIFICATION
The tiles will be pressed clay plain tiles,
with the following format:
• Size: 170 x 270 mm.
• 59 to 65 tiles per sq.m. depending on the overlap:
70 to 90 mm.
• The side colour must match the colour of the visible area.
(1) See P. 194 for a complete table of minimum roof pitches.
(2) See P. 224 for colour description in French.
37
•03CatalogueAngTP.qxd
21/12/04
11:07
Page 23
PLAIN TILE
170
250
1.1 kg.
70
0
26
17
0
455 XLP
Hog’s back hip end - 1.1 kg.
120
484 XL 1 ridge / 2 hip finial
holder(1) - 3.6 kg.
485 XL 1 ridge / 2 ridge finial
holder(1) - 3.3 kg.
250
Accessories
41
0
200
180
240
366 XL
Overlapping ventilated
1/2 round ridge end (pediment) - 2.5 kg.
486 XL 4 hip finial holder
(small model)(1) - 3.3 kg.
434 XLP
Tapered hip (small
model) - 1.8 kg.
613 XLP Ventilation tile with
grating (section 35 cm2) - 1.4 kg.
62 GC Lantern base Ø 100
(3 tiles) - 4.4 kg.
260
Interlocking ventilated
1/2 round ridge end (pediment) - 2.5 kg.
Hog’s back hip -11per m. -
General Terracotta Accessories
240
36 XL
170
432 XLP
Ridges and Hips
250
200
Ridges and Hips
Interlocking ventilated
1/2 round ridge - 4.1 kg.
0
34
Grand Cru
240
31 XL
0
27
Ridges and Hips
80
400
63 XL
Lantern Ø 100 - 3 kg.
120
205
55
41
0
0
22
400
170
180
336 XL
Tapered ridge / hip
(large model) - 3.2 kg.
Tapered hip end (small
model) - 2.3 kg.
481 XL
Plain finial holder- 5.5 kg.
60
260
300
170
180
456 XL
Tapered ridge / hip end
(large model) - 4 kg.
270
270
0
25
0
22
410
631 XL Ventilation cap for
lantern base Ø 100 - 1.5 kg.
453 XLP
85 XLP Universal valley 11 per m. - 1.6 kg. This accessory
130
472 XLP
Left 822 GC Right wall
facing internal angle(1) - 1.3 kg.
60 130
260
330
270
185
220
0
25
200
250
34 XLP
821 GC
1/2 round ridge / 2 hog’s
back hip junction(1) - 4.5 kg.
can be laid on 40° to 50° pitched roofs
with slopes intersecting at a 90° angle.
1/2 round ridge - 3 per m. -
3.7 kg.
462 XL
170
471 XLP
1 angular ridge / 2 hog’s
back hip junction(1) - 4.5 kg.
1 ridge / 2 hip junction -
3.4 kg.
330
200
220
185
Left 824 GC Right wall
facing external angle(1) - 1.3 kg.
65
235
250
823 GC
30
0
250
365 XLP 1/2 round ridge end
(pediment) - 3 per m. - 5.1 kg.
464 XL
330
Eaves
120
160
100
201 XLP Left cloaked verge tile 6 per m. - 1.8 kg.
120
160
202 XLP Right cloaked verge tile 6 per m. - 1.8 kg.
255
330
General junction - 5.6 kg.
0
40
27
0
100
315
466 XL
27
0
200
483 XL
Finial top - 2.3 kg.
402 GC Left 403 GC Right tile
and 1/2 - 1.9 kg.
255
240
392 XL Interlocking ventilated
1/2 round ridge end - 3.6 kg.
200
27
0
0
40
393 XL
Overlapping ventilated
1/2 round ridge end - 4.6 kg.
482 XL
Finial foot - 3.9 kg.
Dimensions in mm are outside dimensions. (1) Available upon order.
0
19
250
Angular ridge end
(pediment) - 3 per m. - 3.8 kg.
PLAIN TILE
Eave and top tile - 0.8 kg.
170
362 XLP
38
83 GC
90
220
270
185
330
Ve r g e s
220
4 hip junction(1) - 3.2 kg.
465 XL
3.1 kg.
0
27
Angular ridge - 3 per m. -
170
0
21
185
90
250
33 XLP
1 GCW Trapezoidal Grand Cru.
Variable weight(1).
435 XLP Bonnet hip tile 11 per m. - 1.5 kg.
1 ridge / 2 ridge junction -
3.2 kg.
4 GC
1.9 kg.
Universal tile and 1/2 -
84 GC
Top tile - 1 kg.
•03CatalogueAngTP.qxd
21/12/04
11:07
Page 24
Longitudinal Spacing
±60 mm = distance between ridge top
and top of first batten
1 GC
Top tile
170
100/95/90 mm gauge = exposed area of the tile
Gauge =
batten spacing
190 mm = distance between
the top of the batten holding
the first full-sized tile
and the cant strip’s lower edge.
70/80/90 mm = overlap
±60 mm = projection
of the tiles over the gutter
Eave and top tile
40 mm = cant strip height
Gutter axis
Overlap
False gauge
Gauge
90 80 70
90 95 100
90 95 100
mm
12 mm
Dimensions (mm)
170 x 270 x 12
Unit weight (kg)
Grand Cru
LAMBERT
27
0
mm
Grand Cru LAMBERT
1.1
Gauge (mm)
100
95
90
Overlap (mm)
70
80
90
Tiles per sq.m.
59
62
65
Battens (ml/sq.m.)
10
Weight per sq.m. (kg)
65
Tiles per pallet
10.5 11.1
68
72
960
(1)
Ventilation: see recommandations P. 193.
270 270 270
Overhanging Verge Tiles(2)
Angle-cut tile
(top and bottom cuts)
Mortar
50 mm
Angle-cut half-tile
(top and bottom cuts)
Cloaked Verge Tiles(2)
Verge tile
170
85
170
Fastener
Left verge
Right verge
Dimensions are indicated in mm.
See P. 223 for the conversion table (metric system to imperial system).
(1) The number of tiles per pallet is indicative only.
All clay tile dimensions admit normative variations of ± 2%.
(2) See P. 207 for further details.
39
•03CatalogueAngTP.qxd
21/12/04
11:07
Page 25
PLAIN TILE
Grand Cru Bullnose
LAMBERT
Co
lou
r:
Fla
me
dR
ed
Colour: Tudor Brown
1 GE
Perpetuating the Bullnose
Tile Tradition.
PLAIN TILE
Perfectly adapted to complete the Grand
Cru range, the Grand Cru Bullnose tile
breaks tradition with its original shape.
The wealth of its colour range allows
combinations and monochromes.
ARCHITECT’S SPECIFICATION
The tiles will be pressed clay plain tiles,
with the following format:
• Size: 170 x 270 mm.
• 59 to 65 tiles per sq.m. depending on
the overlap: 70 to 90 mm.
• A traditional “Bullnose” shape.
• The side colour must match the colour
of the visible area.
A Technical Reference.
Crafted from Chagny’s clay,
renowned for its robustness and
easy cutting, Grand Cru Bullnose
adapts to virtually all shapes
of roofs and offers sophisticated
finish possibilities with its
comprehensive accessory line.
Overall dimensions (mm) 170 x 270 x 12
Unit weight (kg)
Gauge (mm)
100 95
90
Overlap (mm)
70
80
90
Tiles per sq.m.
59
62
65
Battens (ml/sq.m.)
10 10.5 11.1
Weight per sq.m.
59
62
65
Tiles per pallet (2)
960
Minimum pitch(1)
35° / 70%
Ventilation: see recommandations P. 193.
40
1
21/12/04
11:07
Page 26
COLOURS (3)
ACCESSORIES (4)
220
465 XL
can be laid on 40° to 50° pitched
roofs with slopes intersecting
at a 90° angle.
Burgundy Sandfaced
462 XL 1 ridge / 2 hip
junction - 3.4 kg.
315
4 hip junction(4) -
3.2 kg.
466 XL
General junction -
483 XL
5.6 kg.
Finial top - 2.3 kg.
240
1 ridge / 2 ridge
junction - 3.2 kg.
482 XL
484 XL 1 ridge / 2 hip
Finial foot - 3.9 kg. finial holder(5) - 3.6 kg.
485 XL 1 ridge / 2 ridge
finial holder(5) - 3.3 kg.
486 XL 4 hip finial holder
(small model)(5) - 3.3 kg.
90
170
170
0
18
0
19
120
Tudor Brown
200
220
220
336 XL Tapered ridge / hip
456 XL Tapered ridge / hip
(large model) - 3.2 kg.
end (large model) - 4 kg.
464 XL
220
85 XLP Universal valley 11 per m. - 1.6 kg. This accessory
180
330
180
270
0
22
Champagne Sandfaced
410
0
22
400
LAMBERT
300
Flamed Red
0
Plain finial holder-
31 XL
Interlocking ventilated 1/2 round
ridge (ventilation section 10 cm2) 2.5 per m. - 4.1 kg.
36 XL
Interlocking ventilated 1/2 round
ridge end (pediment) - 2.5 kg.
366 XL
Overlapping ventilated 1/2 round
ridge end (pediment) - 2.5 kg.
34 XLP
1/2 round ridge - 3.7 kg.
365 XLP
1/2 round ridge end (pediment) 5.1 kg.
33 XLP
Angular ridge - 3.1 kg.
362 XLP
Angular ridge end (pediment) 3.8 kg.
432 XLP
Hog’s back hip - 1.1 kg.
455 XLP
Hog’s back hip end - 1.7 kg.
434 XLP
Tapered hip (small model) - 1.1 kg.
453 XLP
Tapered hip end (small model)
2.3 kg.
472 XLP
1/2 round ridge / 2 hog’s back
hip junction(4) - 4.5 kg.
471 XLP
1 angular ridge / 2 hog’s back
hip junction(4) - 4.5 kg.
63 XL
0
17
83 GC
Eave and top tile -
0.8 kg.
27
0
201 XLP Left 202 XLP Right
cloaked verge tile - 1.8 kg
205
55
Accessories also available(4):
831 GE Eave and top tile
(bullnose type) - 0.8 kg.
100
160
27
481 XL
5.5 kg.
Grand Cru Bullnose
•03CatalogueAngTP.qxd
613 GE Bullnose ventilation
340
62 GE Bullnose lantern
tile with grating (section
base Ø 100 (3 tiles) - 4 kg.
35 cm2) - 1.3 kg.
631 XL Ventilation cap for
1 GEW Trapezoidal Grand
lantern base Ø 100 - 1.5 kg. Cru Bullnose. Variable weight(5).
Longitudinal Spacing
±60 mm = distance between ridge top
and top of first batten
Top tile
100/95/90 mm gauge = exposed area of the tile
Gauge =
batten spacing
Lantern Ø 100 - 3 kg.
70/80/90 mm = overlap
190 mm = distance between
the top of the batten holding
the first full-sized tile
and the cant strip’s lower edge.
±60 mm = projection
of the tiles over the gutter
Overhanging Verge Tiles(6)
Eave and top tile
Angle-cut tile
(top and bottom cuts)
Mortar
40 mm = cant strip height
Gutter axis
50 mm
Angle-cut half-tile
(top and bottom cuts)
See P. 223 for the conversion table (metric system to imperial system).
(1) See P. 194 for a complete table of minimum roof pitches.
(2) The number of tiles per pallet is indicative only.
All clay tile dimensions admit normative variations of ± 2%.
(3) See P. 224 for colour description in French.
(4) Dimensions in mm are outside dimensions. See P. 20 for all Lambert accessories.
(5) Available upon order. Trapezoidal tiles should be nailed to the battens.
(6) See P. 207 for further details. Further laying option: cloaked verges (refer to Grand Cru).
41
•03CatalogueAngTP.qxd
21/12/04
11:08
Page 27
PLAIN TILE
Héritage
TBF
Co
lou
r:
En
g
lis
h
Bl
en
d
Colour: English Blend
1 HG
The Authenticity
of Outstanding Homes.
PLAIN TILE
The irregular gauge and the thickness
of the tile let its colour shades stand
out. The mix of various “speckled” tones
create rich and bright roof covers,
that will perfectly match with historical
buildings.
A Technical Reference.
In addition to its robustness,
this tile offers two nailing holes
and a holding bar on the
underside that guarantee a
perfectly stable installation.
ARCHITECT’S SPECIFICATION
The tiles will be extruded clay plain tiles,
with the following format:
• Average size: 180 x 280 mm.
• 53 to 58 tiles per sq.m. depending on
the overlap: 70 to 90 mm.
• With a full-width holding bar on the underside
to facilitate laying at singular points.
• With an irregular gauge, i.e. with longitudinal
gauge lengths varying around the 180 x 280 mm
format.
• Regular gauge tiles are not allowed.
Overall dimensions (mm) 180 x 280 x 15
Unit weight (kg)
Gauge (mm)
100 95
90
Overlap (mm)
70
80
90
Tiles per sq.m.
56
59
62
Battens (ml/sq.m.)
10 10.5 11
Weight per sq.m.
95 100 105
Tiles per pallet(2)
576
Minimum pitch(1)
35° / 70%
Ventilation: see recommandations P. 193.
42
1.7
•03CatalogueAngTP.qxd
21/12/04
11:08
Page 28
ACCESSORIES (4)
34 XTP 1/2 round ridge “Val de
Loire” - 3 per m. - 3.3 kg.
12
5
26
0
0
26
180
90
28
0
125
170
20 XTP
Angular ridge end
(pediment) - 4 kg.
Hog’s back hip/verge
tile for bedding - 1.6 kg.
Hog’s back hip end
(or corner hip end) - 1.6 kg
61 PG Ventilation tile (section
25 cm2) - 1.26 kg.
90
300
454 XTP
62 PG
63 XT
Lantern base Ø 100.
Lantern Ø 100.
270
180
17
5
28
0
31
0
0
30
362 XTP
33 XTP Angular ridge (section
25 cm2) - 3.4 per m. - 3 kg.
TBF
453 XTP Round hip end
400 mm - 1 kg.
0
34
Héritage
365 XTP 1/2 round ridge end
“Val de Loire” (pediment) - 4 kg.
30
0
33
9
434 XTP Ridge or round hip tile
400 mm - 2.05 kg.
100
0
40
100
0
26
7
38
0
18
25
0
0
25
18
4
0
17
65 PG
66 XT
1 HGW Trapezoidal
Héritage(5). Variable weight.
433 XTP Hog’s back hip tile
(or corner hip tile) - 1.6 kg.
Lantern base Ø 150.
Lantern Ø 150.
4 HG
83 PG
Eave and top tile - 1 kg.
Universal tile and 1/2 -
2 kg.
Longitudinal Spacing
COLOUR
(3)
60 mm = distance between ridge top
and top of first batten
Top tile
100/95/90 mm gauge = exposed area of the tile
Gauge =
batten spacing
English Blend
70/80/90 mm = overlap
195 mm = distance between
the top of the batten holding
the first full-sized tile
and the cant strip’s lower edge.
60 mm = projection
of the tiles over the gutter
Cloaked Verge Tiles(6)
180
Verge tile
90
Eave tile
40 mm = cant strip height
90
Gutter axis
Fastener
Right verge
See P. 223 for the conversion table (metric system to imperial system).
(1) See P. 194 for a complete table of minimum roof pitches.
(2) The number of tiles per pallet is indicative only. All clay tile dimensions admit normative variations of ± 2%.
(3) See P. 224 for colour description in French.
(4) Dimensions in mm are outside dimensions. See P. 20 for all TBF accessories.
These accessories are supplied in Dark Vieux Château, except for the ventilation tile.
(5) Available upon order.
(6) See P. 207 for further details.
43
•03CatalogueAngTP.qxd
21/12/04
11:08
Page 29
PLAIN TILE
Meursault
LAMBERT
Co
lou
r:
Ch
Sa amp
nd ag
fac ne
ed
Colour: Champagne Sandfaced
Technical Performance.
1 MT
Rich Colours
and Textures.
The Meursault brings
genuine vintage to roofing
projects thanks to its palette
of natural and sandfaced
colours.
Installation is facilitated by
two nailing holes and two nibs.
The underside is structured
to preserve very good waterproofing. The nose, slightly
curved downward, avoids water
infiltration by capillarity.
The tiles will be pressed clay plain tiles,
with the following format:
• Size: 180 x 386 mm.
• 36 to 38 tiles per sq.m. depending on
the overlap: 70 to 90 mm.
• A “Bullnose” shape.
• Slightly rounded edges.
• Hollowed on the underside for better
waterproofing.
Overall dimensions (mm) 180 x 386 x 16
Large Bullnose
Tradition.
Its gauge allows an impeccable
“Bullnose” look. Its rounded edges
perfectly render the traditional
aspect of aged tiles.
PLAIN TILE
ARCHITECT’S SPECIFICATION
Unit weight (kg)
Gauge (mm)
1.8
155 150 145
Overlap (mm)
70
80
90
Tiles per sq.m.
36
37
38
Battens (ml/sq.m.)
6.5 6.7 6.9
Weight per sq.m.
65
69
Tiles per pallet(2)
480
Minimum pitch(1)
35° / 70%
Ventilation: see recommandations P. 193.
44
67
11:08
Page 30
COLOURS (3)
ACCESSORIES (4)
200
180
464 XL 1 ridge / 2 ridge
junction - 3.2 kg.
Champagne Sandfaced
330
220
220
336 XL Tapered ridge / hip
456 XL Tapered ridge / hip
462 XL 1 ridge / 2 hip
(large model) - 3.2 kg.
end (large model) - 4 kg.
junction - 3.4 kg.
315
4 hip junction(5) -
465 XL
466 XL
General junction -
3.2 kg.
5.6 kg.
484 XL 1 ridge / 2 hip
finial holder(5) - 3.6 kg.
485 XL 1 ridge / 2 ridge
finial holder(5) - 3.3 kg.
483 XL
482 XL
Finial top - 2.3 kg.
Finial foot - 3.9 kg.
Tudor Brown
Meursault
220
180
LAMBERT
0
22
Burgundy Sandfaced
410
0
22
400
220
21/12/04
240
•03CatalogueAngTP.qxd
486 XL 4 hip finial holder
481 XL Plain finial holder(small model)(5) - 3.3 kg.
5.5 kg.
0
18
205
6
38
55
Natural Red
613 MT Ventilation tile with 62 MT Lantern base Ø 100 631 XL Ventilation cap for
1 MTW Trapezoidal
grating (section 40 cm2) - 2.2 kg. (3 tiles) - 6.4 kg.
lantern base Ø 100 - 1.5 kg. Meursault. Variable weight(4).
90
Accessories also available(4):
1/2 round ridge - 3 per m. 3.7 kg.
365 XLP
1/2 round ridge end (pediment) 5.8 kg.
33 XLP
Angular ridge - 3 per m. - 3.1 kg.
362 XLP
Angular ridge end (pediment) 3.8 kg.
434 XLP
Tapered hip (small model) - 1.8 kg.
453 XLP
Tapered hip end (small model)
2.3 kg.
110
0
34 XLP
0
23
Overlapping ventilated 1/2 round
ridge end (pediment) - 2.5 kg.
150
6
366 XL
18
100
38
Interlocking ventilated 1/2 round
ridge end (pediment) - 2.5 kg.
180
6
0
Interlocking ventilated 1/2 round
ridge (ventilation section 10 cm2)
2.5 per m. - 4.1 kg.
36 XL
63 XL
38
23
31 XL
90
51 MT Left 52 MT Right 83 MT Eave tile (square
201 MT Left 202 MT Right
1/2 tile - 0.9 kg
end) - 1.1 kg.
cloaked verge tile - 2.7 kg
831 MT Eave and top tile
(bullnose type) - 1.3 kg.
Longitudinal Spacing
71 MT
±100 mm = distance between ridge top
and top of first batten
Glass tile - 1.5 kg.
Top tile
155/150/145 mm gauge = exposed area of the tile
Lantern Ø 100 - 3 kg.
Gauge =
batten spacing
Overhanging Verge Tiles(6)
70/80/90 mm =
overlap
Angle-cut tile
(top and bottom cuts)
270 mm = distance between
the top of the batten holding
the first full-sized tile
and the cant strip’s lower edge.
±60 mm = projection
of the tiles over the gutter
Eave tile
Mortar
40 mm = cant strip height
Gutter axis
50 mm
Angle-cut half-tile
(top and bottom cuts)
See P. 223 for the conversion table (metric system to imperial system).
(1) See P. 194 for a complete table of minimum roof pitches.
(2) The number of tiles per pallet is indicative only.
All clay tile dimensions admit normative variations of ± 2%.
(3) See P. 224 for colour description in French.
(4) Dimensions in mm are outside dimensions. See P. 20 for all Lambert accessories.
(5) Available upon order. Trapezoidal tiles should be nailed to the battens.
(6) See P. 207 for further details. Further laying option: cloaked verges.
45
•03CatalogueAngTP.qxd
27/01/05
15:41
Page 31
PLAIN TILE
Monuments Historiques
TBF
Co
lou
r:
Or
an
ge
Oc
hr
e
Mixing of Ebony, Brown Black and Brown Violet Colours
1 PH
Hand-Made.
PLAIN TILE
Made in one of the most traditional tile
plants in France, the Monuments
Historiques plain tile is designed
specifically for the renovation of roofs
on architectural treasures. With its thick
body and irregular gauge, this tile
renders like a vintage tile.
Colours to Match.
Truly respectful of regional
traditions, the Monuments
Historiques plain tile comes in
a wide range of sandfaced colours.
Bright and rich, they can mix to
create patchworks in harmony
with the original roofs they
rehabilitate.
ARCHITECT’S SPECIFICATION
The tiles will be clay plain terracotta tiles with
an irregular gauge, and the following format:
• Size: 180 x 280 mm.
• 53 to 58 tiles per sq.m. depending on
the overlap: 70 to 90 mm.
• Thickness: 15 mm.
• With an irregular gauge, i.e. with longitudinal
gauge lengths varying on purpose around
the 180 x 280 mm average format.
• Regular gauge tiles are not allowed.
• With a sandfaced and “aged” skin.
Overall dimensions (mm) 180 x 280 x 15
Unit weight (kg)
Gauge (mm)
1.7
100 95 90
Overlap (mm)
70
80
90
Tiles per sq.m.
56
59
62
Battens (ml/sq.m.)
10 10.5 11
Weight per sq.m.
95 100 105
Tiles per pallet(2)
675
Minimum pitch(1)
35° / 70%
Ventilation: see recommandations P. 193.
46
15:41
Page 32
100
0
34
Brown Ebony
30 PH Barrel ridge
400 mm - 3.5 kg.
0
26
0
40
25
6
0
25
13
0
34 PH 1/2 round ridge
“Val de Loire” - 5 kg.
TBF
ACCESSORIES (4)
365 PH 1/2 round ridge end 33 PH Angular ridge “Val de Loire” (pediment) - 5.5 kg. 5 kg.
90
12
5
26
0
0
26
90
125
170
0
30
170
362 PH Angular ridge end
431 PH Round corner hip
(pediment) - 5.5 kg.
tile - 1.7 kg.
455 PH Hog’s back hip or
20 PH Hog’s back hip
verge end (or corner hip end). or verge tile (or corner hip).
Plain Tile
31
0
300
Brown Black
Orange Ochre
Salmon Red
28
0
27
0
170
0
27
170
135
135
180
Brown Violet
201 PH Left cloaked verge
202 PH Right cloaked
tile - 2.3 kg.
verge tile - 2.3 kg.
61 PH Ventilation tile
(section 25 cm2) - 4.8 kg.
Monuments Historiques
COLOURS (3)
30
0
27/01/05
33
9
•03CatalogueAngTP.qxd
103 PH Monuments Historiques bullnose tile - 1.5 kg.
1 PHW Trapezoidal
Monuments Historiques(5).
Longitudinal Spacing
Red Violet
60 mm = distance between ridge top
and top of first batten
Top tile
Straw
100/95/90 mm gauge = exposed area of the tile
Natural Red
Gauge =
batten spacing
70/80/90 mm = overlap
195 mm = distance between
the top of the batten holding
the first full-sized tile
and the cant strip’s lower edge.
60 mm = projection
of the tiles over the gutter
White Ochre
Eave tile
Overhanging Verge Tiles(6)
40 mm = cant strip height
Gutter axis
Angle-cut tile
(top and bottom cuts)
Mortar
50 mm
Angle-cut half-tile
(top and bottom cuts)
See P. 223 for the conversion table (metric system to imperial system).
(1) See P. 194 for a complete table of minimum roof pitches.
(2) The number of tiles per pallet is indicative only.
All clay tile dimensions admit normative variations of ± 2%.
(3) See P. 224 for colour description in French.
(4) Dimensions in mm are outside dimensions. See P.20 for all TBF accessories.
(5) Available upon order.
(6) See P. 207 for further details.
47
•03CatalogueAngTP.qxd
27/01/05
15:41
Page 33
PLAIN TILE
Périgord
TBF
Co
lou
r:
Bu
ck
wh
ea
t
Br
ow
n
Colour: Shaded Slate
1 PG
For Demanding Projects.
PLAIN TILE
With a thick body and a holding bar
across the tile, the Périgord tile is
extremely stable. It adapts very well on
complex and high-pitched roofs.
48
Everlasting Shape
and Look.
With its rich range of shaded
colours, the Périgord tile
beautifully renders the vintage
aspect of old roofs. With its
180 x 280 mm size, it blends into
all environments and enhances
your region’s architectural
heritage.
ARCHITECT’S SPECIFICATION
The tiles will be extruded clay plain tiles,
with the following format:
• Size: 180 x 280 mm.
• 53 to 58 tiles per sq.m. depending on
the overlap: 70 to 90 mm.
• With a full-width holding bar on the underside
to facilitate laying at singular points.
Overall dimensions (mm) 180 x 280 x 11
Unit weight (kg)
Gauge (mm)
1.3
105 100 95
Overlap (mm)
70
80
90
Tiles per sq.m.
53
56
58
Battens (ml/sq.m.)
9.5
10 10.5
Weight per sq.m.
69
73
77
Tiles per pallet (2)
720
Minimum pitch(1)
35° / 70%
Ventilation: see recommandations P. 193.
15:41
Page 34
COLOURS (3)
ACCESSORIES (4)
25
0
0
18
18
4
100
434 XTP Ridge or round hip 453 XTP Round hip end
tile 400 mm - 2.05 kg.
400 mm - 1 kg.
34 XTP 1/2 round ridge “Val 365 XTP 1/2 round ridge end
de Loire” - 3 per m. - 3.33 kg. “Val de Loire” (pediment) - 4 kg.
30
0
31
0
0
17
33 XTP
90
300
0
26
0
26
Shaded Slate
0
34
90
26
0
Dark Vieux Château
0
40
100
33
9
0
25
7
38
170
362 XTP
Angular ridge end 433 XTP Hog’s back hip tile 454 XTP Hog’s back hip end
(pediment) - 4 kg.
(or corner hip tile) - 1.6 kg. (or corner hip end) - 1.6 kg.
Angular ridge 3.4 per m. - 3 kg.
Light Vieux Château
410
410
28
0
180
360
61 PG
360
62 PG
Ventilation tile -
65 PG
Lantern base
Ø 100 - 4 kg.
1.26 kg.
90
135
27
0
170
170
0
27
Hog’s back hip /
verge tile for bedding - 1.6 kg.
28
0
17
5
Eave and top tile -
1 kg.
Old Mill
0
30
20 XTP
360
180
83 PG
125
110
110
Left cloaked verge 202 PG Right cloaked
tile - 2kg.
verge tile - 2 kg.
5.5 kg.
Tobacco Brown
12
5
201 PG
Lantern Ø 150 -
Lantern Ø 100 -
2.9 kg.
90
135
Buckwheat Brown
66 XT
63 XT
Lantern base
Ø 150 - 6.2 kg.
TBF
27/01/05
Périgord
•03CatalogueAngTP.qxd
1 PGW Trapezoidal
Périgord(5). Variable weight.
4 PG Universal tile and
1/2 - 2 kg.
Longitudinal Spacing
60 mm = distance between ridge top
and top of first batten
Eave and top tile
Light Tobacco
105/100/95 mm gauge = exposed area of the tile
Slate
Gauge =
batten spacing
70/80/90 mm = overlap
195 mm = distance between
the top of the batten holding
the first full-sized tile
and the cant strip’s lower edge.
60 mm = projection
of the tiles over the gutter
Cloaked Verge Tiles(6)
180
Verge tile
Eave and top tile
90
40 mm = cant strip height
Gutter axis
90
Fastener
Right verge
See P. 223 for the conversion table (metric system to imperial system).
(1) See P. 194 for a complete table of minimum roof pitches.
(2) The number of tiles per pallet is indicative only.
All clay tile dimensions admit normative variations of ± 2%.
(3) See P. 22 for all available colours and P. 224 for colour description
in French.
(4) Dimensions in mm are outside dimensions. See P.20 for all TBF accessories.
(5) Available upon order.
(6) See P. 207 for further details.
49
•03CatalogueAngTP.qxd
27/01/05
15:42
Page 35
PLAIN TILE
Pommard
LAMBERT
Co
lo
ur
:B
ur
gu
nd
yS
an
df
ac
ed
Colour: Slate Sandfaced
Made from clay of exceptional quality,
the Pommard Lambert is a thick and cross
cambered roof tile. Ideal for the renovation
of older roofs, its rustic aspect is well
suited for traditional residences as well
as for the demands of more modern
constructions.
Shape and Thickness.
PLAIN TILE
Thick, robust, with a very rustic
aspect. Slight convex across,
it stops water ingress.
50
Bright Sandfaced
Colour-Shades.
For new or renovated
constructions, Pommard’s three
carefully elaborated sandfaced
colours faithfully reproduce aged
ancient tiles.
Its sandfaced colours are the result of a
blending of various pigments, inspired
by the many light reflection effects and
harmonious colours seen on ancient roofs.
•03CatalogueAngTP.qxd
27/01/05
15:42
Page 36
Burgundy Sandfaced
Champagne Sandfaced
Pommard
LAMBERT
COLOURS (2)
Slate Sandfaced
Colour: Champagne Sandfaced
Colour: Burgundy Sandfaced
Overall dimensions
Tiles per sq.m.
Minimum pitch(1)
Colour: Slate Sandfaced
170 x 270 x14 mm
From 59 to 65
35° / 70%
ARCHITECT’S SPECIFICATION
The tiles will be pressed clay plain tiles,
with the following format:
• Size: 170 x 270 mm.
• 59 to 65 tiles per sq.m. depending on the overlap:
70 to 90 mm.
• Thickness: 14 mm.
• Sandfaced on the whole surface.
(1) See P. 194 for a complete table of minimum roof pitches.
(2) See P. 224 for colour description in French.
51
•03CatalogueAngTP.qxd
27/01/05
15:42
Page 37
PLAIN TILE
170
453 XLP
Tapered hip end (small
model) - 2.3 kg.
Plain finial holder- 5.5 kg.
260
472 XLP 1/2 round ridge / 2 hog’s
back hip junction(1) - 4.5 kg.
260
250
220
0
25
Accessories
200
200
240
366 XL
Overlapping ventilated
1/2 round ridge end (pediment) - 2.5 kg.
462 XL
471 XLP 1 angular ridge / 2 hog’s
back hip junction(1) - 4.5 kg.
1 ridge / 2 hip junction -
3.4 kg.
62 PO Lantern base Ø 100
(3 tiles) - 5 kg.
63 XL
Lantern Ø 100 - 3 kg.
205
55
220
0
22
400
180
90
464 XL
220
180
160
100
201 XLP Left cloaked verge tile 6 per m. - 1.8 kg.
90
4 hip junction(1) - 3.2 kg.
465 XL
1 POW Trapezoidal Pommard.
Variable weight(1).
120
456 XL Tapered ridge / hip end
(large model) - 4 kg.
0
27
Ve r g e s
3.2 kg.
0
22
410
631 XL Ventilation cap for
lantern base Ø 100 - 1.5 kg.
1 ridge / 2 ridge junction -
330
185
160
220
100
27
0
Tapered ridge / hip
(large model) - 3.2 kg.
120
336 XL
202 XLP Right cloaked verge tile 6 per m. - 1.8 kg.
250
3.7 kg.
466 XL
General junction - 5.6 kg.
270
25
5
185
330
330
250
170
315
Eaves
1/2 round ridge - 3 per m. -
0
19
34 XLP
613 XLP Ventilation tile with
grating (section 35 cm2) - 1.4 kg.
260
41
0
41
0
120
481 XL
General Terracotta Accessories
Interlocking ventilated
1/2 round ridge end (pediment) - 2.5 kg.
Tapered hip (small
model) - 1.8 kg.
Ridges and Hips
240
36 XL
Ridges and Hips
250
200
180
434 XLP
0
34
Pommard
Interlocking ventilated
1/2 round ridge - 4.1 kg.
0
27
240
31 XL
170
0
25
Ridges and Hips
120
400
83 PO
402 GC
Left tile and 1/2 - 1.9 kg.
Eave and top tile - 1 kg.
250
365 XLP
1/2 round ridge end
(pediment) - 3 per m. - 5.1 kg.
483 XL
255
Finial top - 2.3 kg.
27
0
185
240
330
403 GC
Right tile and 1/2 - 1.9 kg.
250
33 XLP
Angular ridge - 3 per m. -
3.1 kg.
482 XL
Finial foot - 3.9 kg.
270
185
330
250
362 XLP
484 XL 1 ridge / 2 hip finial
holder(1) - 3.6 kg.
250
Angular ridge end
(pediment) - 3.8 kg.
432 XLP
170
PLAIN TILE
432 XLP
Hog’s back hip 11 per m. - 1.1 kg.
485 XL 1 ridge / 2 ridge finial
holder(1) - 3.3 kg.
70
0
26
17
0
455 XLP
Hog’s back hip end - 1.1 kg.
486 XL 4 hip finial holder
(small model)(1) - 3.3 kg.
Dimensions in mm are outside dimensions. (1) Available upon order.
52
T ERREAL’s plus
Choose you roof’s look among
Pommard’s two hip tile solutions:
- Hog’s back hip, for bedding
with mortar, for a traditional
look.
- Hog’s back hip, interlocking,
for a cost-effective dry-laying.
•03CatalogueAngTP.qxd
27/01/05
15:42
Page 38
±60 mm = distance between ridge top
and top of first batten
1 PO
Top tile
17
0m
100/95/90 mm gauge = exposed area of the tile
Gauge =
batten spacing
190 mm = distance between
the top of the batten holding
the first full-sized tile
and the cant strip’s lower edge.
70/80/90 mm = overlap
±60 mm = projection
of the tiles over the gutter
Eave and top tile
40 mm = cant strip height
Gutter axis
Overlap
False gauge
Gauge
90 80 70
90 95 100
90 95 100
14 mm
m
Dimensions (mm)
170 x 270 x 14
Unit weight (kg)
Pommard
Longitudinal Spacing
LAMBERT
27
0
mm
Pommard LAMBERT
1.3
Gauge (mm)
100
95
90
Overlap (mm)
70
80
90
Tiles per sq.m.
59
62
65
Battens (ml/sq.m.)
10
Weight per sq.m. (kg)
76
Tiles per pallet
10.5 11.1
80
85
864
(1)
Ventilation: see recommandations P. 193.
270 270 270
Overhanging Verge Tiles(2)
Angle-cut tile
(top and bottom cuts)
Mortar
50 mm
Angle-cut half-tile
(top and bottom cuts)
Cloaked Verge Tiles(2)
Verge tile
170
85
170
Fastener
Left verge
Right verge
Dimensions are indicated in mm.
See P. 223 for the conversion table (metric system to imperial system).
(1) The number of tiles per pallet is indicative only.
All clay tile dimensions admit normative variations of ± 2%.
(2) See P. 207 for further details.
53
•03CatalogueAngTP.qxd
27/01/05
15:42
Page 39
PLAIN TILE
Priory
LAMBERT
Co
lou
r:
Da
rk
An
tiq
ue
Colour: Dark Antique
With its irregular profile and soft edges,
upscale Priory is perfectly designed for
exceptional roofs on homes with character.
This authentic tile calls for old-fashioned
laying methods, without the use of cloaked
verge tiles.
Priory’s rich and subtle colours allow to
Irregular Gauge.
The various “noses” and the soft edges
uniquely render the irregular and aged
look of vintage terracotta roofs.
Thick and Rustic Body.
renovate historical or classified monuments
15 mm thick Priory is renowned
for its robustness and
for its faithfulness to tradition.
with grace and authenticity. It also presents
all the guarantees of a modern tile.
PLAIN TILE
Irregular and Worn Look of Vintage Roofs.
54
Irregular nose.
Rounded edges.
•03CatalogueAngTP.qxd
27/01/05
15:43
Page 40
Heather
Purple
Straw
Priory
Dark Antique
LAMBERT
COLOURS (2)
Mixing Colours.
Colour: Heather
60% Dark Antique
+ 20% Heather + 20% Straw
70% Dark Antique
+ 30% Heather
Colour: Dark Antique
Overall dimensions
Tiles per sq.m.
Minimum pitch(1)
170 x 270 x15 mm
From 59 to 65
35° / 70%
ARCHITECT’S SPECIFICATION
The tiles will be pressed clay plain tiles,
with the following format:
• Size: 170 x 270 mm.
• 59 to 65 tiles per sq.m. depending on the overlap:
70 to 90 mm.
• With an irregular gauge, i.e. the nose will be cut
differently from tile to tile.
• Tiles with regular gauge won’t be allowed.
(1) See P. 194 for a complete table of minimum roof pitches.
(2) See P. 224 for colour description in French.
55
•03CatalogueAngTP.qxd
21/12/04
11:25
Page 41
472 XLP 1/2 round ridge / 2 hog’s
back hip junction(1) - 4.5 kg.
1/2 round ridge end
(pediment) - 5.1 kg.
0
25
185
Ve r g e s
255
62 PR Lantern base Ø 100
(3 tiles) - 5 kg.
250
33 XLP
Angular ridge - 3 per m. -
3.1 kg.
471 XLP
1 angular ridge / 2 hog’s
back hip junction(1) - 4.5 kg.
63 XL
Lantern Ø 100 - 3 kg.
27
0
4 PR
Universal tile and 1/2 -
1.9 kg.
170
330
270
185
330
83 PR
250
362 XLP
483 XL
Finial top - 2.3 kg.
Eave and top tile - 1 kg.
170
1 PRW Trapezoidal Priory.
Variable weight(1).
0
21
Angular ridge end
(pediment) - 3.8 kg.
1/2 tile - 0.60 kg.
0
19
Accessories
260
330
5 PR
Eaves
260
613 XLP Ventilation tile with
grating (section 35 cm2) - 1.4 kg.
27
0
260
200
Bonnet hip tile - 1.5 kg.
General Terracotta Accessories
185
250
250
365 XLP
Ridges and Hips
185
330
435 XLP
85
0
34
Priory
34 XLP 1/2 round ridge 3 per m. - 3.7 kg.
30
0
0
27
250
170
65
235
330
0
25
Ridges and Hips
PLAIN TILE
240
250
80
84 PR
Top tile - 1.1 kg.
170
432 PR
Hog’s back hip - 1.1 kg.
482 XL
Finial foot - 3.9 kg.
70
0
26
17
0
455 XLP
484 XL 1 ridge / 2 hip finial
holder(1) - 3.6 kg.
Hog’s back hip end -
1.1 kg.
90
260
0
19
Round hip tile - 1.7 kg.
481 XL
Plain finial holder- 5.5 kg.
60 130
270
300
270
431 XLP
Colour: Dark Antique
85 XLP
Universal valley 11 per m. - 1.6 kg. This accessory
can be laid on 40° to 50° pitched roofs
with slopes intersecting at a 90° angle.
170
823 PR Left 824 PR Right wall
facing external angle(1) - 1.4 kg.
1 PR
T ERREAL’s plus
Priory’s exclusive.
Irregular gauge: brings
PLAIN TILE
volume and rustic look to the
roof, thanks to Priory’s different
shapes achieved by various nose
cuts and rounded edges.
Dimensions in mm are outside dimensions.
(1) Available upon order.
56
•03CatalogueAngTP.qxd
21/12/04
11:25
Page 42
27
0
mm
Priory LAMBERT
1 PR
Top tile
17
0m
105/100/95 mm gauge = exposed area of the tile
Gauge =
batten spacing
190 mm = distance between
the top of the batten holding
the first full-sized tile
and the cant strip’s lower edge.
70/80/90 mm = overlap
±60 mm = projection
of the tiles over the gutter
Eave and top tile
15 mm
m
Dimensions (mm)
Unit weight (kg)
1.3
Gauge (mm)
100
95
90
Overlap (mm)
70
80
90
Tiles per sq.m.
59
62
65
Battens (ml/sq.m.)
40 mm = cant strip height
Gutter axis
Overlap
False gauge
Gauge
170 x 270 x 15
Weight per sq.m. (kg)
110
76
Tiles per pallet
(1)
90 80 70
90 95 100
90 95 100
Priory
±60 mm = distance between ridge top
and top of first batten
LAMBERT
Longitudinal Spacing
10.5 11.1
80
85
864
Ventilation: see recommandations P. 193.
270 270 270
Overhanging Verge Tiles(2)
Angle-cut tile
(top and bottom cuts)
Mortar
50 mm
Angle-cut half-tile
(top and bottom cuts)
Colour: Heather
Colour: Dark Antique
Dimensions are indicated in mm.
See P. 223 for the conversion table (metric system to imperial system).
(1) The number of tiles per pallet is indicative only.
All clay tile dimensions admit normative variations of ± 2%.
(2) See P. 207 for further details.
57
•03CatalogueAngTP.qxd
21/12/04
11:25
Page 43
PLAIN TILE
Rustique
LAMBERT
Co
lou
r:
No
rm
an
dy
Sa
nd
fa
ce
d
Colour:
Colour:Heather
Lorem
The Rustique Lambert has a strong regional identity and traditional aesthetic
appeal, making it the ideal solution for
authentic roofs and graceful houses.
It brings the final touch of elegance thanks
to its warm and finely-shaded colours.
Made in Normandy, the Rustique a genuine
old-style tile whose varied tones add that
Unmatched
Sandfaced Texture.
PLAIN TILE
The original colouring process
is completed with a rustic,
graduated sandfaced finish.
This exclusive combination results
in rich and beautiful roofs.
58
Reliability
and Resistance.
The Rustique tile is solid
and cambered. It stands up both
to the hardships of fixing and to
the weather conditions.
note of warmth which will make roofs
attractive.
Discover today its sophisticated new colour:
Normandy Sandfaced.
•03CatalogueAngTP.qxd
21/12/04
11:25
Page 44
Champagne Sandfaced
Normandy Sandfaced
Dark Antique
Heather
Rustique
LAMBERT
COLOURS (2)
Colour: Dark Antique
Straw
Colour: Straw
Overall dimensions
Tiles per sq.m.
Minimum pitch*
170 x 270 x12 mm
From 59 to 65
35° / 70%
ARCHITECT’S SPECIFICATION
The tiles will be pressed clay plain tiles,
with the following format:
• A traditional size: 170 x 270 mm.
• 59 to 65 tiles per sq.m. depending on the overlap:
70 to 90 mm.
• A sandfaced skin spanning the whole tile.
(1) See P. 194 for a complete table of minimum roof pitches.
(2) See P. 224 for colour description in French.
59
•03CatalogueAngTP.qxd
21/12/04
11:25
Page 45
PLAIN TILE
Round hip tile - 1.1 kg.
65
235
200
185
330
30
0
250
33 XLP
Angular ridge - 3 per m. -
435 NO
Bonnet hip tile - 1.2 kg.
3.1 kg.
300
135
Ve r g e s
201 NO
170
Left verge tile - 6 per m. -
1.6 kg.
90
135
170
27
0
100
612 NO Triangular ventilation tile
with grating (section 20 cm2) - 1.2 kg.
202 NO
Right verge tile - 6 per m. -
1.6 kg.
255
85
27
0
270
431 XLP
General Terracotta Accessories
Accessories
235
613 NO Ventilation tile with
grating (section 35 cm2) - 1.4 kg.
170
365 XLP 1/2 round ridge end
(pediment) - 3 per m. - 5.1 kg.
Hog’s back hip end -
100
0
27
250
Ridges and Hips
185
250
330
455 XLP
0.95 kg.
5
17
Rustique
34 XLP 1/2 round ridge 3 per m. - 3.6 kg.
17
0
90
170
0
27
250
0
26
0
27
Ridges and Hips
11
0
330
62 NO Lantern base Ø 100
(3 tiles) - 4.4 kg.
5 NO
1/2 tile - 0.55 kg.
330
250
362 XLP Angular ridge end
(pediment) - 3 per m. - 3.8 kg.
85 XLP Universal valley 11 per m. - 1.6 kg. This accessory
can be laid on 35° to 50° pitched roofs
with slopes intersecting at a 90° angle.
80
27
0
260
270
270
255
63 XL
4 NO
Lantern Ø 100 - 1.3 kg.
Universal tile and 1/2 -
1.7 kg.
260
472 NO 1/2 round ridge / 2 hog’s
back hip junction - 4.5 kg.
40
65 NO Lantern base with cap
Ø 150 (3 tiles) - 5.9 kg.
260
270
0
25
433 NO Interlocking hog’s back
hip - 1.1 kg.
471 NO 1 angular ridge / 2 hog’s
back hip junction - 3.7 kg.
103 NO
83 NO
Eave and top tile - 0.75 kg.
170
0
21
150
170
0
18
43 NO Hog’s back hip for
bedding - 1.1 kg.
Under ridges
245
0
25
170
Rustique Bullnose.
84 NO
Top tile - 0.9 kg.
T ERREAL’s plus
612 RN
PLAIN TILE
2 ventilation tiles are available
for Rustique: the traditional tile
with a half-round opening,
and another with a triangular
open.
Dimensions in mm are outside dimensions.
(1) Available upon order.
60
613 RN
60 130
270
Other Accessories
1NOW Trapezoidal Rustique.
Variable weight(1).
170
823 NO
Left 824 NO Right wall
facing external angle(1) - 1.4 kg.
•03CatalogueAngTP.qxd
21/12/04
11:25
Page 46
±60 mm = distance between ridge top
and top of first batten
1 NO
Top tile
170
100/95/90 mm gauge = exposed area of the tile
Gauge =
batten spacing
190 mm = distance between
the top of the batten holding
the first full-sized tile
and the cant strip’s lower edge.
70/80/90 mm = overlap
±60 mm = projection
of the tiles over the gutter
Eave and top tile
40 mm = cant strip height
Gutter axis
Overlap
False gauge
Gauge
90 80 70
90 95 100
90 95 100
mm
12 mm
Dimensions (mm)
170 x 270 x 12
Unit weight (kg)
Rustique
Longitudinal Spacing
LAMBERT
27
0
mm
Rustique LAMBERT
1.1
Gauge (mm)
100
95
90
Overlap (mm)
70
80
90
Tiles per sq.m.
59
62
65
Battens (ml/sq.m.)
10
Weight per sq.m. (kg)
65
Tiles per pallet
10.5 11.1
68
72
936
(1)
Ventilation: see recommandations P. 193.
270 270 270
Overhanging Verge Tiles(2)
Angle-cut tile
(top and bottom cuts)
Mortar
50 mm
Angle-cut half-tile
(top and bottom cuts)
Cloaked Verge Tiles(2)
Verge tile
170
85
170
Fastener
Left verge
Right verge
Dimensions are indicated in mm.
See P. 223 for the conversion table (metric system to imperial system).
(1) The number of tiles per pallet is indicative only.
All clay tile dimensions admit normative variations of ± 2%.
(2) See P. 207 for further details.
61
•03CatalogueAngTP.qxd
21/12/04
11:25
Page 47
PLAIN TILE
Ségala
GUIRAUD
Co
lou
r:
Fla
me
dR
ed
Colour: Manor
1 P20
Exclusive Colours.
PLAIN TILE
Its warm flamed tones and shaded
tints elegantly dress sophisticated
homes. A charm available in 9 colours
including brand-new Flamed
Kings’ Valley.
62
Robust and Technical.
Easy to lay with its large size
(200 x 300 mm), the Ségala tile
is very stable thanks to a holding
bar spanning across the underside
of the tile, opening the possibility
of complex roof designs.
ARCHITECT’S SPECIFICATION
The tiles will be extruded clay plain tiles,
with the following format:
• Size: 200 x 300 mm.
• 43 to 48 tiles per sq.m. depending on
the overlap: 70 to 90 mm.
• With a full-width holding bar on the underside
to facilitate laying at singular points.
Overall dimensions (mm) 200 x 300 x 13
Unit weight (kg)
Gauge (mm)
1.5
115 110 105
Overlap (mm)
70
80
90
Tiles per sq.m.
43
45
48
Battens (ml/sq.m.)
8.7 9.1 9.5
Weight per sq.m.
65
68
71
Tiles per pallet(2)
684
Minimum pitch(1)
35° / 70%
Ventilation: see recommandations P. 193.
21/12/04
11:26
Page 48
ACCESSORIES (4)
170
130
80
210
0
40
0
50
56
0
0
50
130
170
170
200
1 CL
45 XG Languedocienne
Languedocienne
barrel tile - 2.5 per m. - 2.6 kg. barrel hip end - 3.5 kg.
1 CG
1 CV
Girondine barrel
tile - 2.5 per m. - 1.9 kg.
Vendéenne barrel
tile - 3.4 per m. - 1.5 kg.
70
90
130
11
220
34 XGP
1/2 round ridge 3 per m. - 3.8 kg.
33 XGP
Angular ridge 3 per m. - 3.2 kg.
180
Slate-style ridge(6) - 43 XGP Hog’s back hip tile
2.5 per m. - 4.5 kg.
for bedding (or corner hip tile).
311 XGP
11
0
11
0
100
300
0
26
90
90
120
120
120
300
280
120
17
0
190
300
0
44
230
200
250
43
0
33
0
Flamed Red
GUIRAUD
COLOURS (3)
Ségala
•03CatalogueAngTP.qxd
432 XGP Hog’s back hip tile 455 XGP Hog’s back hip end 201 P20 Left 202 P20 Right 20 P20 Universal flat verge
(new model) - 1.6 kg.
(new model) - 1.6 kg.
tile for bedding - 1.7 kg.
cloaked verge tile - 2.4 kg
Oldish Sologne
W
NE
200
200
R
300
0
30
30
0
CO
LOU
0
30
4 P20 Universal tile and
1/2 - 2.2 kg
611 P20 Triangular ventilation 61 P20 1/2 round ventilation 65 P20 Lantern base
tile (section 35 cm2) - 1.4 kg. tile (section 35 cm2) - 1.4 kg. Ø 150 - 5.4 kg.
Flamed Kings’ Valley
3.8 kg.
49 XG Finial 48 XG Cone
ridge ornament. ridge ornament.
67 XG Extension pipe
Ø 150 - h= 400 - 6 kg.
77 XG Ventilation metal
68 XG Bird stop for
flashing VM880 - 2 metre strip. ventilation tile - 0.01 kg.
66 XG
Lantern Ø 150 -
46 XG
47 XG
3-way junction.
4-way junction.
1 P20W Trapezoidal
Ségala(5). Variable weight.
Manor
502 XG
Universal clip.
Vieux Clocher
Longitudinal Spacing
±70 mm = distance between ridge top
and top of first batten
Fired Earth
Top tile
115/110/105 mm gauge = exposed area of the tile
Brown
Gauge =
batten spacing
70/80/90 mm = overlap
Natural Red
See P. 223 for the conversion table (metric system to imperial system).
(1) See P. 194 for a complete table of minimum roof pitches.
(2) The number of tiles per pallet is indicative only.
All clay tile dimensions admit normative variations of ± 2%.
(2) See P. 22 for all available colours and P. 224 for colour description in French.
(3) Dimensions in mm are outside dimensions. See P. 20 for all Guiraud accessories.
(4) Available upon order.
(5) Available in Natural Red and Brown colours only.
215 mm = distance between
the top of the batten holding
the first full-sized tile
and the cant strip’s lower edge.
±60 mm = projection
of the tiles over the gutter
Eave tile
40 mm = cant strip height
Gutter axis
63
•03CatalogueAngTP.qxd
21/12/04
11:26
Page 49
PLAIN TILE
Sologne
GUIRAUD
Co
lou
r:
Na
tu
ra
lR
ed
Colour: Flamed Red
1 P17
A Reliable Technical
Reference.
PLAIN TILE
With its slightly convex shape,
the Sologne tile offers curves that
underline its shades and colours.
The holding bar spanning across
the underside of the tile provides
a great stability and allows to create
the most complex roof designs.
ARCHITECT’S SPECIFICATION
The tiles will be pressed clay plain tiles,
with the following format:
• Size: 170 x 280 mm.
• 56 to 62 tiles per sq.m. depending
on the overlap: 70 to 90 mm.
• Thickness: 12 mm.
• With a full-width holding bar on the underside
to facilitate laying at singular points.
Harmonious Colours.
The new Flamed Kings’ Valley
now completes Sologne’s colour
range. These shaded and bright
colours can also be mixed
to create elegant combinations.
Overall dimensions (mm) 170 x 280 x 12
Unit weight (kg)
Gauge (mm)
1.2
105 100 95
Overlap (mm)
70
80
90
Tiles per sq.m.
56
59
62
Battens (ml/sq.m.)
9.5
10 10.5
Weight per sq.m.
67
71
Tiles per pallet(2)
912
Minimum pitch(1)
35° / 70%
Ventilation: see recommandations P. 193.
64
74
21/12/04
11:26
Page 50
ACCESSORIES (4)
170
130
80
210
0
40
0
50
56
0
0
50
130
170
170
200
1 CL
45 XG Languedocienne
Languedocienne
barrel tile - 2.5 per m. - 2.6 kg. barrel hip end - 3.5 kg.
1 CG
1 CV
Girondine barrel
tile - 2.5 per m. - 1.9 kg.
Vendéenne barrel
tile - 3.4 per m. - 1.5 kg.
70
90
130
11
250
R
220
34 XGP
1/2 round ridge 3 per m. - 3.8 kg.
33 XGP
Angular ridge 3 per m. - 3.2 kg.
300
CO
33
0
W
NE
LOU
43
0
Oldish Sologne
0
44
230
180
Slate-style ridge(6) - 43 XGP Hog’s back hip tile
2.5 per m. - 4.5 kg.
for bedding (or corner hip tile).
311 XGP
11
0
120
290
120
120
280
290
120
120
190
Flamed Kings’ Valley
120
GUIRAUD
COLOURS (3)
Sologne
•03CatalogueAngTP.qxd
432 XGP Hog’s back hip tile 455 XGP Hog’s back hip end 201 P17 Left 202 P17 Right 20 P20 Universal flat verge
(new model) - 1.6 kg.
(new model) - 1.6 kg.
tile for bedding - 1.7 kg.
cloaked verge tile - 2 kg
170
255
28
0
28
0
0
28
170
170
0
28
4 P17 Universal tile and
1/2 - 1.8 kg
611 P17 Triangular ventilation 61 P17 1/2 round ventilation
tile (section 35 cm2) - 1.5 kg. tile (section 35 cm2) - 1.5 kg.
62 P17
65 P17
Lantern base Ø 100.
Lantern base Ø 150.
Flamed Red
49 XG Finial 48 XG Cone
ridge ornament. ridge ornament.
46 XG
47 XG
3-way junction.
4-way junction.
77 XG Ventilation metal
Extension pipe - h = 400
64 XG Ø 100 67 XG Ø 150. flashing VM880 - 2 metre strip.
502 XG
Universal clip.
63 XG
66 XG
Lantern Ø 100.
Lantern Ø 150.
1 P17W Trapezoidal
Sologne(4). Variable weight.
Manor
Vieux Clocher
Longitudinal Spacing
60 mm = distance between ridge top
and top of first batten
Tobacco
Top tile
105/100/95 mm gauge = exposed area of the tile
Brown
Gauge =
batten spacing
70/80/90 mm = overlap
Fired Earth
See P. 223 for the conversion table (metric system to imperial system).
(1) See P. 194 for a complete table of minimum roof pitches.
(2) The number of tiles per pallet is indicative only.
All clay tile dimensions admit normative variations of ± 2%.
(3) See P. 22 for all available colours and P. 224 for colour description in French.
(4) Dimensions in mm are outside dimensions. See P. 20 for all Guiraud accessories.
(5) Available upon order.
(6) Available in Natural Red and Brown colours only.
195 mm = distance between
the top of the batten holding
the first full-sized tile
and the cant strip’s lower edge.
60 mm = projection
of the tiles over the gutter
Eave tile
40 mm = cant strip height
Gutter axis
65
•03CatalogueAngTP.qxd
21/12/04
11:26
Page 51
PLAIN TILE
Sologne and Ségala Old Country
GUIRAUD
Colour: Manor
ed
lam
F
:
ur
lo
Co
Sologne
Old Country
d
Re
Overall dimensions (mm) 170 x 280 x 16 200x300x16
Unit weight (kg)
1 V17 Sologne
Old Country
1 V20 Ségala
Old Country
A Wealth of Colour Tones.
Thick and Authentic.
The vintage aspect of ancient tiles
naturally comes to life with the alliance
of its thick body, irregular gauge
and scratched skin.
Ségala
Old Country
Perfect for renovations and heritage,
these “classified monuments” tiles respect
the architecture of protected sites and
ancient houses, thanks to the combination
of their aged colours and sophisticated skin.
1.5
1.8
Gauge (mm)
105 100 95 115 110 105
Overlap (mm)
70 80 90 70 80 90
Tiles per sq.m.
56 59 62 43 45 48
Battens (ml/sq.m.)
9.5 10 10.5 8.7 9.1 9.5
Weight per sq.m. (kg) 84 88 93 78 82 86
Tiles per pallet (kg)(2)
Minimum pitch(1)
768
576
35° / 70%
35° / 70%
Ventilation: see recommandations P. 193.
PLAIN TILE
ARCHITECT’S SPECIFICATION Sologne Old Country
66
The tiles will be extruded clay plain tiles,
with the following format:
• Size: 170 x 280 mm.
• 56 to 62 tiles per sq.m. depending on the overlap:
70 to 90 mm.
• Thickness: 16 mm.
• With an irregular gauge, i.e. with longitudinal gauge
lengths varying around the 170 x 280 mm format.
• Tiles with a regular gauge are not allowed.
• With a full-width holding bar on the underside
to facilitate laying at singular points.
ARCHITECT’S SPECIFICATION Ségala Old Country
The tiles will be extruded clay plain tiles,
with the following format:
• Size: 200 x 300 mm.
• 43 to 48 tiles per sq.m. depending on the overlap:
70 to 90 mm.
• Thickness: 16 mm.
• With an irregular gauge, i.e. with longitudinal gauge
lengths varying around the 200 x 300 mm format.
• Tiles with a regular gauge are not allowed.
• With a full-width holding bar on the underside
to facilitate laying at singular points.
21/12/04
11:26
Page 52
ACCESSORIES (4)(7)
170
130
80
210
130
0
40
0
50
56
0
0
50
170
170
200
1 CL
45 XG Languedocienne
Languedocienne
barrel tile - 2.5 per m. - 2.6 kg. barrel hip end - 3.5 kg.
1 CG
1 CV
Girondine barrel
tile - 2.5 per m. - 1.9 kg.
Vendéenne barrel
tile - 3.4 per m. - 1.5 kg.
70
90
130
11
220
34 XGP
1/2 round ridge 3 per m. - 3.8 kg.
33 XGP
Angular ridge 3 per m. - 3.2 kg.
300
43
0
33
0
Manor
250
0
44
230
180
Slate-style ridge(6) - 43 XGV Hog’s back hip tile
2.5 per m. - 4.5 kg.
for bedding (or corner hip tile).
311 XGP
11
0
90
300
90
120
280
120
190
Flamed Red
GUIRAUD
COLOURS (3)
4 V20
4 V17
432 XGP Hog’s back hip tile 455 XGP Hog’s back hip end
20V20 Universal flat
(new model) - 1.6 kg.
(new model) - 1.6 kg.
verge tile for bedding.
Universal tile and 1/2.
Lantern base:
Triangular 61 V20 61 V17 Triangular Ø 100 62 V17
2
2
ventilation tile (section 35 cm ). ventilation tile (section 35 cm ). Ø 150 65 V17
Lantern:
Ø 100 63 XG Ø 150
611 V20 611 V17
65 P20
Sologne and
Ségala Old Country
•03CatalogueAngTP.qxd
66 XG
Vieux Clocher
49 XG Finial 48 XG Cone
ridge ornament. ridge ornament.
46 XG
47 XG
3-way junction.
4-way junction.
1 V20W
1 V17W
Extension pipe - h = 400
Ø 100 64 XG Ø 150 67 XG
Trapezoidal tiles(5).
Accessories also available(4):
Longitudinal Spacing(7)
60 mm = distance between ridge top
and top of first batten
77 XG
Ventilation metal flashing VM880
2 metre strip - 5.9 kg.
68 XG
Bird stop for ventilation tile.
502 XG
Universal clip.
Top tile
105/100/95 mm gauge
115/110/105 mm gauge = exposed area of the tile
70/80/90 mm = overlap
Overlap
False gauge
Gauge
Sologne
Old Country
90 80 70
95 100 105
95 100 105
Ségala
Old Country
90 80 70
105 110 115
105 110 115
195 mm / 215 mm = distance between
the top of the batten holding
the first full-sized tile
and the cant strip’s lower edge.
280 280 280 300 300 300
Gauge =
batten
spacing
Cloaked Verge Tiles(6)(7)
170/200
85/100
60 mm = projection
of the tiles over the gutter
Eave tile
Verge tile
40 mm = cant strip height
Gutter axis
170/120
Fastener
Right verge
See P. 223 for the conversion table (metric system to imperial system).
(1) See P. 194 for a complete table of minimum roof pitches.
(2) The number of tiles per pallet is indicative only.
All clay tile dimensions admit normative variations of ± 2%.
(3) See P. 224 for colour description in French.
(4) Dimensions in mm are outside dimensions. See P. 20 for all Guiraud accessories.
(5) Available upon order - Variable weights.
(6) Available in Natural Red and Brown colours only.
(7)
Accessories and dimensions only for Sologne Old Country.
Accessories and dimensions only for Ségala Old Country.
Accessories and dimensions for both Sologne and Ségala Old Country.
67
21/12/04
17:32
Export Customer Service
TERREAL • 37, rue du Pieu • 78130 Les Mureaux • France
Tel: +33 130 904 200 • Fax: +33 130 904 268
www.terreal.co.uk
Corp&Co, [email protected] • © Photos: Pol de Prins, Getty Images • Non-contractual photos • Terreal reserves the right to modify the technical specifications of its products • 10/2004 • Ref: FA332
CouvPDF.qxd
Page 2