Square D Clipsal
Indoor PIR Occupancy
Sensor
®
®
The Square D ® Clipsal ® Indoor PIR Occupancy Sensor provides
reliable thermal-radiation-based control of lighting and other C-Bus
output devices.
Suitable for wall or ceiling mounting, this sensor offers a continuous
detection field of 400 square feet and a 90˚ field of view. The entire
detection field has uniform sensitivity and no dead zones, making it
an ideal lighting-control solution for offices, corridors, and conference
rooms.
Configuration options include an adjustable light-level sensor that can
be set to automatically turn off lights when ambient light levels are
sufficient or turn on lights when ambient light levels are insufficient.
Features

Clipsal Indoor PIR Occupancy Sensor






Indoor use, wall or ceiling-mounted unit with a 90˚ field of view
and a detection area of 400 square feet
LED can be configured to indicate motion detection
Light-level sensor has Sunrise/Sunset settings, clock overrides,
and adjustable sensitivity ranging from 0.1 foot candle to full
sunlight
Advanced circuitry to help prevent false triggering, including
electrostatic and electromagnetic shields, dual element detectors,
pyroelectric ceramic sensors, and an optical band pass filter
Controls up to four C-Bus group addresses that can be
individually scheduled
Non-volatile memory stores operating status for recovery from a
power outage
Receives data and power over a network, so the sensor does not
require power packs or line voltage connections
Distributed Intelligence


Compatible with all Clipsal devices and the Square D ® Powerlink ®
NF3000G3C controller
Easily configured by using Learn Mode or the C-Bus™ Toolkit
Software and a personal computer connected to the C-Bus
network
Specifications
Indoor 90˚ PIR Occupancy Sensor
28 ft
8.5 m
Nominal Voltage
Requirements
15‑36 V DC @ 18 mA, drawn from the
C-Bus network
Field of View
90˚
PIR Detection
Field
Typically 400 sq ft (37 sq m)
Light Level Inhibit
Threshold
Continuous from 0.1 footcandle (1 lux) to full
sunlight
Timer Delay
Range
0 sec‑18 hr, 1 sec interval
Number of Units
per Network
Use the C-Bus Calculator, a software utility,
to determine the total network current load
C-Bus
Connection
Screw-type terminals, input terminals
accomodate 24-16 AWG cable (0.2-1.5 mm2)
Status Indicator
LED can be configured to turn on when
motion is detected
Dimensions
3.9 in. (W) x 2.2 in. (H)
[100 mm (W) x 57 mm (H)]
Field of view from top and side of indoor
occupancy sensor
Weight
4.4 oz (125 g)
Mounting
• Surface: Ceiling or wall
• Ht: 8 ft (2.4 m) above floor
Operating
Environment
• Indoor
• 32˚F to 122˚F (0˚C to 50˚C)
• RH: 95%, noncondensing
Standards
• UL: Listed 916 Energy Management
Equipment
• CSA 22.2 Spec 205 Signal Equipment
• FCC: Part 15.101, Class B Digital Device
• EN61000-4-2 Immunity to ESD
Front view of indoor occupancy sensor
Description
Catalog Number
Clipsal 90° Indoor PIR Occupancy
Sensor
SLC5751L
Schneider Electric North American Operating Division
Document Number 1250HO0515
295 Tech Park Drive
Square D, the
logo, Clipsal, Powerlink, and C-Bus are trademarks or registered
LaVergne, TN 37086
trademarks of Schneider Elecric and/or its affiliates in the United States and/or other countries.
Tel: 1-888-squared
www.squaredlightingcontrol.com
2/06
© 2006 Schneider Electric. All Rights Reserved.
Order Information