Product Data Sheet
DuPont Teflon Silicone & White Lithium
™
™
DuPont™ Teflon™ Silicone Lubricant
DuPont™ Teflon™ White Lithium Spray Grease
Ideal for materials that may be damaged by conventional
lubricants. Safe on most surfaces. Prevents binding &
freezing.
Ideal for heavy duty applications. Will not melt, freeze,
wash off, or break down under high speeds, extreme heat
or heavy loads.
PRODUCT DESCRIPTION & FEATURES
Performs in extreme temps from -40°F (-40°C) to 400°F (204°C).
Formulated with Teflon® fluoropolymer to outperform other Silicone
Sprays in both metal and non-metal applications.
Waterproofs, protects, lubricates and preserves rubber, plastic, vinyl,
leather, metal & wood. Seals out moisture.
Eliminates squeaking and binding in windows, conveyors, fan belts,
hinges, locks, cables, etc. Good low tech mold release agent.
Helps prevent rust, oxidation and corrosion on all metals.
Helps prevent build up of glues, inks, paints, waxes, etc.
Protects O-rings, fishing gear, tools, and farm equipment from salt,
chlorine and corrosives.
Prevents snow sticking and muddy buildups on shovels, snow
plows, wheel wells, etc.
Clean, Non-Staining and Odorless.
Good dielectric properties. Excellent lubricity.
Good resistance to high & prolonged shear stress.
Silicone-rich formula with 8% Silicone content.
NSF H-2 Food Grade Approved.
PRODUCT DESCRIPTION & FEATURES
Performs in temperatures from 0°F (-17°C) to 400°F (204°C).
Sprays on wet, then sets up as a water & corrosion resistant grease.
Enhanced with Teflon® fluoropolymer for better water resistance,
maximum lubricity, higher temperature stability & better boundary
lubrication protection.
Unlike lower technology products which use a straight Lithium
12-Hydroxystearate grease, this product is formulated with a fully
functional, industrial grade, Lithium Complex Grease.
Clean, white, low odor grease which is very user friendly.
Long lasting protection in a broad range of applications & conditions.
Reduces friction in metal to metal & metal to plastic applications.
Contains no chlorinated solvents including Perchlorethylene.
TYPICAL APPLICATIONS
Use on hinges, locks, latches, springs, plastic gears, rollers, drawer
guides and other sliding parts. Conveyors, assemblies, heat sealers,
cutting tables, slicing equipment, tools, dies, tuners, switches, fan belts
& rubber moldings. Waterproofs leather and protects vinyl.
DIRECTIONS FOR USE
1. Provide adequate ventilation. Do not use near open flames.
2. Shake well before using.
3. Either spray or brush on a light, even coat. Repeat for heavy-duty
applications.
Note: When waterproofing leather or sensitive materials test on an
inconspicuous area. Do NOT use on floors or automotive pedals, MAY
CAUSE SLIPPING OR FALLS.
PROPERTIES OF MATERIAL
Base Lubricant
Premium Grade Silicone Polymer
PTFE (Polytetrafluoroethylene)
Appearance
Colorless, Odorless, Limpid Liquid
Flash Point
Aerosol: 0°F (-18°C)
Bulk Liquid: 15°F (-9°C)
NFPA Flammability Rating 3 (Highly Flammable)
PERFORMANCE OF MATERIAL
Once solvent carrier evaporates, the residual silicone coating will
exhibit the following performance characteristics:
Viscosity at 25°C, approx.
Flash Point (closed cup), approx.
Freezing Point, approx.
Thermal Conductivity, approx.
Surface Tension at 25°C, approx.
Dielectric strength at 25°C, approx.
350 mm/s
> 572°F (300°C)
-58°F (-50°C)
0.16 W/m°C
21.1 mN/m
16 kV/mm
ORDERING INFORMATION
Part Number
Container Size
DS0614101
14 oz. Net Wt. Aerosol
DS0024101
1.5 lb (24 oz) Jug
DS0096101
6 lb (96 oz) Jug
DS0480101
30 lb (480 oz) Pail
TYPICAL APPLICATIONS
Use on open lube points and high load applications including gears
and shafts, heavy duty chains, cables, machinery, conveyors, lifting
mechanisms, overhead garage doors, axles, bearings, pivots, linkages,
cables, fan motors, slides, couplings, automotive hinges, brake parts,
latches, springs, coils, pulleys, bolt threads, plumbing fixtures, etc.
DIRECTIONS FOR USE
1. Provide adequate ventilation. Do not use near open flames.
2. Shake well before use to fully mix.
3. Press the nozzle and spray the product uniformly. Grease will
thicken as carrier evaporates.
For best results: Use straw and apply to clean surfaces
PROPERTIES OF MATERIAL
Thickener Type
NLGI Grade
Texture / Color
Flash Point Aerosol
NFPA Flammability Rating
Lithium Complex
#2
Smooth / Off White
0°F (-18°C)
3 (Highly Flammable)
PERFORMANCE OF MATERIAL
Once carrier and diluents evaporate, the residual grease will exhibit the
following typical specifications:
Dropping Point (ASTM D-2265) Min
500°F (260°C)
Rust & Corrosion Test Rating (ASTM D-1743)
Pass
Copper Strip Corrosion (ASTM D-4048) Rating
1b
Oil Separation (ASTM D-1742)
5
Oxidation Stability (ASTM D-942) PSI Drop / 100 hrs
5
Base Oil Characteristics - Viscosity SUS @ 100°F
735-950
Viscosity SUS @ 210°F
73.5-86
Viscosity Index, Min.
90
ORDERING INFORMATION
Part Number
Container Size
DW0614101
14 oz. Net Wt. Aerosol
Large containers available via special orders.
Storage - Keep away from heat, sparks & flame. Store in a well ventilated place.
Handling - For safe handling information consult the MSDS.
The information set forth herein is furnished free of charge and is based on technical data that is believed to
be reliable. It is intended for use by persons having technical skill and at their own discretion and risk. Because
conditions of use are outside our control, we make no warranties, express or implied, and assume no liability
in connection with any use of this information. Nothing herein is to be taken as a license to operate under or a
recommendation to infringe any patents. Due to continual product research and development, the information
contained herein is subject to change without notice.
The DuPont Oval Logo, DuPont™, The miracles of science™, Teflon™, Teflon® and Teflon® diamond shaped logo
are registered trademarks or trademarks of DuPont and are used under license by Finish Line Technologies, Inc.
© 2005. DuPont. All rights reserved.
Updated 7/22/05
For Assistance Please Call DuPont Australia at 1800-252-997 • Contact Us for the Nearest Distributor
[email protected] • www.DuPont.com.au