ISO Update
Supplement to ISOFocus
November 2014
International Standards in process
An International Standard is the result of an agreement between
the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus
has been reached within the technical committee, the document is
sent to the Central Secretariat for processing as a draft International
Standard (DIS). The DIS requires approval by at least 75 % of the
member bodies casting a vote. A confirmation vote is subsequently
carried out on a final draft International Standard (FDIS), the approval
criteria remaining the same.
TC 42
Photography
ISO/CD 19567
Photography — Digital cameras — Texture
reproduction measurements
TC 44
Welding and allied processes
ISO/CD 14343
Welding consumables — Wire electrodes,
strip electrodes, wires and rods for arc welding of stainless and heat resisting steels
— Classification
ISO/CD 18276
Welding consumables — Tubular cored electrodes for gas-shielded and non-gas-shielded
metal arc welding of high-strength steels
— Classification
TC 54
Essential oils
ISO/CD 13171
Essential oils — Oil of origanum (Origanum
vulgare ssp. hirtum.)
TC 61
Plastics
ISO/CD TS
15791-2
Plastics — Development and use of intermediate-scale fire tests for products — Part 2:
ISO/CD
16396-2
Plastics — Polyamide (PA) moulding and extrusion materials — Part 2: Preparation of test
specimens and determination of properties
ISO/CD 19927
Fibre-reinforced plastic composites — Determination of interlaminar strength and modulus
by double beamshear test
They have been registered at the Central Secretariat.
TC 83
Sports and other recreational facilities
and equipment
PC 278
Anti-bribery management systems
ISO/CD 37001
Anti-bribery management systems
ISO/CD
10256-1
Head and face protection for use in ice hockey
— Part 1: General requirements
TC 22
Road vehicles
ISO/CD
29061-3
Road vehicles — Methods and criteria for usability evaluation of child restraint systems and
their interface with vehicle anchorage systems
— Part 3: Installation of child restraint systems
using vehicle seat belts
ISO/CD
10256-2
Head and face protection for use in ice
hockey — Part 2: Skaters — Performance
requirements
ISO/CD
10256-3
Head and face protection for use in ice
hockey — Part 3: Skaters — Performance
requirements
ISO/CD
29061-4
Road vehicles — Methods and criteria for usability evaluation of child restraint systems and
their interface with vehicle anchorage systems
— Part 4: Securing of child in child restraint
system and daily handling aspects
ISO/CD
10256-4
Head and face protection for use in ice
hockey — Part 4: Goalkeepers — Performance
requirements
ISO/CD
10256-5
Head and face protection for use in ice hockey
— Part 5: Neck laceration protectors for ice
hockey player
TC 85
Nuclear energy, nuclear technologies,
and radiological protection
ISO/CD 18417
Iodine charcoal sorbents for nuclear facilities —
Method for defining sorption capacity index
CD registered
Period from 01 October to 31 October 2014
These documents are currently under consideration in the technical
committee.
ISO/CD
29061-5
TC 23
Road vehicles — Methods and criteria for usability evaluation of child restraint systems and
their interface with vehicle anchorage systems
— Part 5: Installation and securing of child in a
booster seat
Tractors and machinery for agriculture
and forestry
TC 92
Fire safety
ISO/CD 19021
Prescriptive test method for determination of
smoke gases emitted by fire of materials and
products used in transportation
ISO/DTR
15155-1
Agricultural irrigation equipment — Test
facilities for agricultural irrigation equipment —
Part 1: Test facilities for agricultural irrigation
equipment
TC 94
TC 24
Particle characterization including
sieving
Personal safety -- Protective clothing
and equipment
ISO/CD 18889
ISO/CD 22412
Particle size analysis — Dynamic light scattering (DLS)
Protective gloves for pesticide operators —
Performance requirements
ISO/CD 19918
Protective clothing — Protection against liquid
chemicals — Measurement of cumulative
permeation of chemicals with low vapour pressure through protective clothing and glove
materials
ISO/DTS
16976-1
Respiratory protective devices — Human factors — Part 1: Metabolic rates and respiratory
flow rates
TC 106
Dentistry
TC 27
Solid mineral fuels
ISO/CD 7404-1
Methods for the petrographic analysis of
bituminous coal and anthracite — Part 1:
Vocabulary
TC 37
Terminology and other language and
content resources
ISO/CD 24624
Language resource management — Transcription of spoken language
ISO Update, Supplement to ISO Focus -- November 2014
1
ISO/CD 7787-1
Dental rotary instruments — Cutters — Part 1:
Steel laboratory cutters
ISO/CD 9873
Dental hand instruments — Reusable mirrors
and handles
ISO/CD 14457
Dentistry — Handpieces and motors
ISO/CD 19715
Dentistry — Filling instruments with contra set
TC 108
Mechanical vibration, shock and condition monitoring
ISO/CD 2017-3
Mechanical vibration and shock — Resilient
mounting systems — -- Part 3: Technical
information to be exchanged for application of
vibration isolation to new buildings
ISO/CD 17562
Fine ceramics (advanced ceramics, advanced
technical ceramics) - Test method for linear
thermal expansion of monolithic ceramics by
push-rod technique
TC 207
Environmental management
ISO
14024:1999/
CD Amd 1
Environmental labels and declarations — Type
I environmental labelling — Principles and
procedures — Amendment 1
ISO/DTS
14027
Environmental labels and declarations — Type
III environmental declarations — Product Category Rule (PCR) development
TC 215
Health informatics
ISO/DTS
16843-1
Health Informatics — Categorial structures
for representation of acupuncture — Part 1:
Acupuncture points
ISO/DTS
16843-2
Health Informatics — Categorial structures
for representation of acupuncture — Part 2:
Needling
ISO/CD 25237
Health informatics — Pseudonymisation
TC 219
Floor coverings
ISO/CD 10582
Resilient floor coverings — Specification for
heterogeneous vinyl flooring to include luxury
vinyl tile requirements
TC 227
Springs
ISO/CD
19690-1
Disc springs — Part 1: Calculation
ISO/CD
19690-2
Disc springs — Part 2: Technical specifications
TC 249
Traditional chinese medicine
Traditional Chinese Medicine — Intradermal
acupuncture needles
TC 118
Compressors and pneumatic tools,
machines and equipment
ISO
1217:2009/CD
Amd 1
Displacement compressors — Acceptance
tests — Amendment 1: Calculation of isentropic efficiency and relationship with specific
energy
TC 121
Anaesthetic and respiratory equipment
ISO/CD 9170-1
Terminal units for medical gas pipeline systems
— Part 1: Terminal units for use with compressed medical gases and vacuum
TC 126
Tobacco and tobacco products
ISO/CD 19290
Cigarettes — Determination of tobacco specific
nitrosamines in mainstream cigarette smoke —
Method using LC-MS/MS
TC 130
Graphic technology
ISO/DTR
19300
Graphic technology — Guidelines for the use of
standards for print media production
TC 164
Mechanical testing of metals
ISO/CD 18746
ISO/CD 9649
Metallic materials — Wire — Reverse torsion
test
TC 262
Risk management
TC 170
Surgical instruments
Risk management — Vocabulary
ISO/CD 7153-1
Surgical instruments — Materials — Part 1:
Metals
ISO/CD Guide
73
ISO/CD 31000
Risk management — Principles and guidelines
TC 190
Soil quality
TC 265
ISO/CD
18400-104
Soil quality — Sampling — Part 104: Strategies
and statistical evaluations
Carbon dioxide capture, transportation,
and geological storage
ISO/CD 27913
ISO/CD
18400-202
Soil quality — Sampling — Part 202: Preliminary investigations
Carbon dioxide capture, transportation and
geological storage — Pipeline transportation
systems
ISO/CD
18400-203
Soil quality — Sampling — Part 203: Investigation of potentially contaminated sites
ISO/CD 27917
Capture, transport and geological storage of
CO2 — Vocabulary
ISO/CD
18400-204
Soil quality — Sampling — Part 204: Guidance
on sampling of soil gas
TC 204
Intelligent transport systems
ISO/CD
13111-1
Intelligent transport systems — The use of
personal ITS station to support ITS service provision for travellers — Part 1: General information and use cases definition
TMBG
Technical Management Board - groups
ISO/IEC CD
Guide 98-3
Uncertainty of measurement — Part 3: Guide
to the expression of uncertainty in measurement (GUM:1995)
JTC 1
Information technology
ISO/IEC
10646:2014/
PDAM 2
Information technology — Universal Coded
Character Set (UCS) — Amendment 2: Bhaiksuki, Marchen, Tangut, Zanabazar Square, and
other characters
TC 205
Building environment design
ISO/CD
18566-1
Building environment design — Design, test
methods and control of hydronic radiant
heating and cooling panel systems — Part 1:
Definition, symbols, technical specifications
and requirements
ISO/IEC CD
7811-9
Identification cards — Recording technique —
Part 9: Tactile identifier mark
ISO/IEC CD
29003
Information technology — Security techniques
— Identity proofing
ISO/CD
18566-2
Building environment design — Design, test
methods and control of hydronic radiant
heating and cooling panel systems — Part 2:
Determination of heating and cooling capacity
of ceiling mounted radiant panels
ISO/IEC
23001-9:2014/
PDAM 1
Information technology — MPEG systems
technologies — Part 9: Common encryption of
MPEG-2 transport streams — Amendment 1:
Support of Sparse Encryption
ISO/CD
18566-3
Building environment design — Design, test
methods and control of hydronic radiant
heating and cooling panel systems — Part 3:
Design of ceiling mounted radiant panels
ISO/IEC CD
18047-6
Information technology — Radio frequency
identification device conformance test methods — Part 6: Test methods for air interface
communications at 860 MHz to 960 MHz
TC 206
Fine ceramics
2
ISO Update, Supplement to ISO Focus -- November 2014
ISO/IEC CD
30113-11
Information technology — Gesture-based
interfaces across devices and methods — Part
11: Single-point gesture for common system
actions
ISO/DIS 8575
*
(Revision of ISO 8575:1990)
ISO/DIS 20105
ISO/DIS 20106
*
*
DIS circulated
ISO/DIS 20107
*
Period from 01 October to 31 October 2014
These documents have obtained substantial support within the appropriate ISO technical committee.
ISO/DIS 20205
*
They have been submitted to the ISO member bodies for voting by
the date shown.
* Available in English only
ISO/DIS 20206
*
Vote
terminates
TC 4
Rolling bearings
ISO/DIS
3245.2
Rolling bearings — Needle roller
bearings, drawn cup without inner ring — Geometrical product
specifications (GPS), boundary
dimensions and tolerances
(Revision of ISO 3245:2007)
TC 6
ISO/DIS 302
ISO/DIS 20207
2014-12-16
Paper, board and pulps
*
ISO/DIS 20208
ISO/DIS 20210
Pulps — Determination of Kappa
number
*
*
*
2015-01-23
ISO/DIS 20211
(Revision of ISO 302:2004)
ISO/DIS 11476
*
Paper and board — Determination of CIE whiteness, C/2°
(indoor illumination conditions)
2015-01-23
ISO/DIS 20213
*
*
(Revision of ISO 11476:2010)
TC 8
ISO/DIS 29404
Ships and marine
technology
*
ISO/DIS
15016.2
Ships and marine technology —
Guidelines for the assessment of
speed and power performance
by analysis of speed trial data
(Revision of ISO 15016:2002)
TC 10
ISO/DIS 13715
ISO/DIS 20215
*
*
Technical product documentation — Edges of undefined
shape — Indication and
dimensioning
(Revision of ISO 13715:2000)
ISO/DIS 20216
*
ISO/DIS 20217
*
2015-01-16
TC 21
ISO/DIS 16852
Vignole railway rails 43 kg/m and
above
Space data and information
transfer systems — Mission operations common object model
2015-01-07
Space data and information
transfer systems — Spacecraft
onboard interface services —
Device virtualization service
Space data and information
transfer systems — Spacecraft
Onboard Interface Systems
— Low Data-Rate Wireless
Communications for Spacecraft
Monitoring and Control
Space data and information
transfer systems — IP over
CCSDS space links
Space data and information
transfer systems — CCSDS
Space Link Protocols over ETSI
DVB-S2 Standard
Space data and information
transfer systems — Delta-DOR
Raw Data Exchange Format
Space data and information
transfer systems — Mission
Operations Message Abstraction
Layer - JAVA API
Space data and information
transfer systems — Spacecraft
Onboard Interface Services —
Device Access Service
Space data and information
transfer systems — Spacecraft
onboard interface services —
Message transfer service
Space data and information
transfer systems — Security architecture for space data
systems
Space data and information
transfer systems — CCSDS
cryptographic algorithms
2015-01-07
2015-01-28
2015-01-28
2015-01-28
2015-01-28
2015-01-28
2015-01-28
2015-01-28
2015-01-28
2015-01-28
Space data and information
transfer systems — Spacecraft
onboard interface services —
Device data pooling service
Space data and information
transfer systems — Spacecraft
onboard interface services —
File and packet store services
2015-01-28
2015-01-28
*
Flame arresters — Performance
requirements, test methods and
limits for use
2015-03-24
(Revision of ISO 16852:2008,
ISO 16852:2008/Cor 1:2008, ISO
16852:2008/Cor 2:2009)
(Revision of ISO 5003:1980)
Aircraft and space vehicles
TC 22
ISO Update, Supplement to ISO Focus -- November 2014
2015-01-07
Equipment for fire protection and fire fighting
Steel
*
Space data and information
transfer systems — Operation of
CFDP over encapsulation service
2014-12-07
2015-01-09
TC 20
*
Technical product
documentation
TC 17
ISO/DIS 5003
ISO/DIS 20214
Ships and marine technology
— Specific requirements for
offshore wind farm components
— Supply chain information flow
Aerospace — Fluid systems —
Hydraulic system tubing
Road vehicles
3
ISO/DIS
10924-5
ISO/DIS 15082
*
*
Road vehicles — Circuit breakers — Part 5: Circuit breakers
with tabs with rated voltage of
450 V
ISO/DIS
11290-1
*
2015-01-16
Road vehicles — Tests for rigid
plastic safety glazing materials
2015-01-29
(Revision of ISO 15082:1999)
TC 23
Tractors and machinery for
agriculture and forestry
ISO/DIS 789-3
*
Agricultural tractors — Test procedures — Part 3: Turning and
clearance diameters
(Revision of ISO 789-3:1993)
ISO/DIS 5131
*
Tractors for agriculture and forestry — Measurement of noise
ate the operator's position —
Survey method
(Revision of ISO 5131:1996)
ISO/DIS
4254-7
*
TC 24
ISO/DIS
3310-1
Agricultural machinery — Safety
— Part 7: Combine harvesters, forage harvesters, cotton
harvesters and sugar cane
harversters
(Revision of ISO 4254-7:2008)
Test sieves — Technical requirements and testing — Part 1: Test
sieves of metal wire cloth
ISO/DIS
11290-2
*
Microbiology of the food chain
— Horizontal method for the
detection and enumeration of
Listeria monocytogenes and of
Listeria spp. — Part 2: Enumeration method
(Revision of ISO 11290-2:1998,
ISO 11290-2:1998/Amd 1:2004)
ISO/DIS 18465
*
Microbiology of the food chain
- Quantitative analysis of emetic
toxin (cereulide) using LC-MS/
MS
2015-01-16
ISO/DIS 17780
*
TC 35
ISO/DIS
2811-1
*
2015-01-15
ISO/DIS
20567-1
*
Industrial woven wire cloth —
Technical requirements and tests
ISO/DIS
20567-2
*
(Revision of ISO 9044:1999)
ISO/DIS 5074
Solid mineral fuels
*
TC 39
Hard coal — Determination of
Hardgrove grindability index
2015-01-07
ISO/DIS
19085-1
ISO/DIS
4263-3.2
Petroleum products and
lubricants
*
TC 34
ISO/DIS
16634-2
ISO/DIS 27105
4
Petroleum and related products
— Determination of the ageing
behaviour of inhibited oils and
fluids using the TOST test —
Part 3: Anhydrous procedure for
synthetic hydraulic fluids
(Revision of ISO 4263-3:2010)
ISO/DIS
19085-2
2014-12-17
*
TC 43
ISO/DIS 389-3
*
Food products — Determination
of the total nitrogen content by
combustion according to the Dumas principle and calculation of
the crude protein content — Part
2: Cereals, pulses and milled
cereal products
(Revision of ISO/TS
16634-2:2009)
Milk and cheese — Determination of hen's egg white lysozyme
content by high performance
liquid chromatography
(Revision of ISO/TS 27105:2009)
2015-03-17
2015-03-03
ISO/DIS 362-3
*
TC 44
2015-01-30
ISO/DIS
9692-3
Paints and varnishes — Determination of stone-chip resistance
of coatings — Part 1: Multiimpact testing
(Revision of ISO 20567-1:2005)
Paints and varnishes — Determination of stone-chip resistance
of coatings — Part 2: Singleimpact test with a guided impact
body
(Revision of ISO 20567-2:2005)
2015-03-17
2015-03-17
Woodworking machines —
Safety — Part 1: Common
requirements
2015-03-03
Woodworking machines — Safety — Part 2: Horizontal beam
panel circular sawing machines
2015-03-17
Acoustics
*
Food products
*
Paints and varnishes — Determination of density — Part 1:
Pycnometer method
Machine tools
*
(Revision of ISO 5074:1994)
TC 28
2015-01-24
(Revision of ISO 2811-1:2011)
2015-01-16
TC 27
2015-03-10
Paints and varnishes
*
(Revision of ISO 3310-1:2000,
ISO 3310-1:2000/Cor 1:2004)
ISO/DIS 9044
Animal and vegetable fats and
oils — Determination of aliphatic
hydrocarbons in vegetable oils
2015-03-31
2015-03-24
Particle characterization
including sieving
*
Microbiology of the food chain
— Horizontal method for the
detection and enumeration of
Listeria monocytogenes and
other Listeria spp. — Part 1:
Detection method
(Revision of ISO 11290-1:1996,
ISO 11290-1:1996/Amd 1:2004)
Acoustics — Reference zero for
the calibration of audiometric
equipment — Part 3: Reference equivalent threshold force
levels for pure tones and bone
vibrators
(Revision of ISO 389-3:1994, ISO
389-3:1994/Cor 1:1995)
Measurement of noise emitted
by accelerating road vehicles
— Engineering method — Part
3: Indoor testing M and N
categories
2015-03-10
2015-01-07
Welding and allied
processes
*
Welding and allied processes
— Recommendations for joint
preparation — Part 3: Metal inert
gas welding and tungsten inert
gas welding of aluminium and
its alloys
2015-03-10
ISO Update, Supplement to ISO Focus -- November 2014
(Revision of ISO 9692-3:2000)
TC 58
ISO/DIS 15453
*
TC 59
ISO/DIS
16757-2
*
*
ISO 123121:2013/DAmd
1
2015-02-08
Petroleum and natural gas
offshore platforms — Guidelines
for materials selection for high
content CO2 environment for
casings, tubings and downhole
equipment
ISO/DIS
12749-4
ISO/DIS 16639
*
TC 92
ISO/DIS
16730-1
Nuclear energy, nuclear
technologies, and radiological
protection — Vocabulary —
Part 4: Dosimetry for radiation
processing
Surveillance of the activity concentrations of airborne radioactive substances in the workplace
of nuclear facilities
*
Fire safety engineering — Procedures and requirements for
verification and validation of
calculation methods — Part 1:
General
(Revision of ISO 16730:2008)
TC 117
ISO/DIS 5801
Personal protective equipment
— Footwear protecting against
risks in foundries and welding —
Part 1: Requirements and test
methods for protection against
risks in foundries
(Revision of ISO 20349:2010)
ISO Update, Supplement to ISO Focus -- November 2014
Dentistry — Implants — Dynamic
fatigue test for endosseous
dental implants
2015-03-10
Fans
*
Fans — Performance testing using standardized airways
2015-03-17
(Revision of ISO 5801:2007, ISO
5801:2007/Cor 1:2008)
TC 126
ISO/DIS 6565
2015-01-09
Tobacco and tobacco
products
*
TC 127
ISO
9244:2008/
DAmd 1
2015-01-07
2015-01-28
Earth-moving machinery —
Machine safety labels — General
principles — Amendment 1
*
Hydraulic spin-on filters with
finite lives — Method for verifying the rated fatigue life and the
rated static burst pressure of the
pressure-containing envelope
ISO/DIS
21018-4
*
Hydraulic fluid power — Monitoring the level of particulate
contamination in the fluid —
Part 4: Use of the light extinction
technique
TC 133
ISO/DIS 18163
2015-01-21
2015-01-28
Clothing sizing systems
- size designation, size
measurement methods and
digital fittings
*
TC 136
ISO/DIS 7170
2015-01-23
Fluid power systems
ISO/DIS 12829
2015-01-28
2015-02-03
Tobacco and tobacco products
— Draw resistance of cigarettes
and pressure drop of filter rods
— Standard conditions and
measurement
(Revision of ISO 6565:2011)
Earth-moving machinery
*
TC 131
Personal safety -- Protective clothing and
equipment
*
Dentistry — Coupling dimensions for handpiece connectors
(Revision of ISO 14801:2007)
Fire safety
TC 94
ISO/DIS
20349-1
*
Securities and related financial
instruments — Classification of
financial instruments (CFI code)
(Revision of ISO 10962:2001)
Prefilled syringes — Part 1:
Glass cylinders for dental local
anaesthetic cartridges
2015-03-10
Dentistry
*
2015-03-03
Nuclear energy, nuclear
technologies, and radiological protection
*
ISO/DIS 3964
Eye and face protection —
Sunglasses and related eyewear
— Part 1: Sunglasses for general
use — Amendment 1
2015-02-03
(Revision of ISO 3964:1982)
(Revision of ISO 11040-1:1992)
TC 85
TC 106
ISO/DIS 14801
Transfusion, infusion
and injection, and blood
processing equipment for
medical and pharmaceutical use
*
*
Personal protective equipment
— Footwear protecting against
risks in foundries and welding —
Part 2: Requirements and test
methods for protection against
risks in welding and allied
processes
(Revision of ISO 20349:2010)
2015-03-03
Financial services
*
TC 76
ISO/DIS
11040-1
Data structures for electronic
product catalogues for building
services — Part 2: Geometry
*
2015-01-23
Materials, equipment and
offshore structures for petroleum, petrochemical and
natural gas industries
TC 68
ISO/DIS
10962.2
Gas cylinders - Seamless
steel and aluminium-alloy gas
cylinders - Evaluation of existing gas cylinders and consideration of their safe use in other
jurisdictions
Buildings and civil engineering works
TC 67
ISO/DIS 17348
ISO/DIS
20349-2
Gas cylinders
Clothing — Digital fittings — Vocabulary and terminology used
for the virtual garment
2015-01-14
Furniture
*
Furniture — Storage units —
Determination of strength and
durability
2015-01-23
(Revision of ISO 7170:2005)
5
ISO/DIS 7171
*
Furniture — Storage units —
Determination of stability
ISO/DIS
11354-2
*
2015-01-23
(Revision of ISO 7171:1988)
ISO/DIS 7173
*
Furniture - Seating - Test methods for the determination of
strength and durability
2015-01-08
ISO/DIS
9094.3
(Revision of ISO 7173:1989)
ISO/DIS 19682
*
TC 142
ISO/DIS
16890-1
*
Air filters for general ventilation
— Part 1: Technical specifications, requirements and efficiency classification system based
upon Particulate Matter (PM)
Small craft
*
2015-01-08
(Revision of ISO 9094-2:2002,
ISO 9094-1:2003)
ISO/DIS 10087
*
ISO/DIS 18635
*
*
TC 149
ISO/DIS 11243
2015-03-10
(Revision of ISO 10087:2006)
ISO/DIS 11591
*
ISO/DIS
20685-2
*
2015-03-10
Water quality — Determination of
turbidity — Part 1: Quantitative
methods
(Revision of ISO 11591:2011)
2015-03-10
ISO/DIS 14895
*
TC 184
6
Water quality — Application of
inductively coupled plasma mass
spectrometry (ICP-MS) — Part
2: Determination of selected
elements including uranium
isotopes
(Revision of ISO 17294-2:2003)
Water quality — Determination
of short-chain polychlorinated alkanes (SCCPs) in sediment and
suspended (particulate) matter
— Method using gas chromatography-mass spectrometry (GCMS) and negative-ion chemical
ionization (NCI)
Small craft — Liquid-fuelled
galley stoves and heating
appliances
2015-03-24
(Revision of ISO 14895:2000)
2015-03-24
TC 190
ISO/DIS 15009
Soil quality
*
2015-03-31
TC 192
ISO/DIS
19859.2
Soil quality — Gas chromatographic determination of the
content of volatile aromatic
hydrocarbons, naphthalene and
volatile halogenated hydrocarbons — Purge-and-trap method
with thermal desorption
(Revision of ISO 15009:2012)
2015-03-03
Gas turbines
*
Gas turbine applications — Requirements for power generation
2014-12-25
Cycles — Luggage carriers for
bicycles — Requirements and
test
methods
(Revision of ISO 11243:1994)
TC 194
2015-03-03
ISO/DIS
10993-6
Biological and clinical evaluation of medical devices
*
Ergonomics
*
*
TC 171
ISO/DIS
32000-2
Small craft — Field of vision from
helm position
Cycles
TC 159
ISO/DIS
7250-3
Small craft — Craft identification
— Coding system
2015-03-17
(Revision of ISO 7027:1999)
ISO/DIS
17294-2
Small craft — Fire protection
Water quality
*
2015-01-28
2014-12-17
Cleaning equipment for air
and other gases
TC 147
ISO/DIS
7027-1
Furniture — Tables — Test
methods for the determination of
stability, strength and durability
TC 188
Advanced automation technologies and their applications
— Requirements for establishing manufacturing enterprise
process interoperability — Part
2: Maturity model for assessing
enterprise interoperability
TC 201
ISO/DIS 18554
3-D scanning methodologies for
internationally compatible anthropometric databases — Part
2: Evaluation protocol of surface
shape and repeatability of relative landmark positions
Document management — Portable document format — Part 2:
PDF 2.0
Automation systems and
integration
2015-03-17
(Revision of ISO 10993-6:2007)
Basic human body measurements for technological
design — Part 3: Worldwide and
regional design values for use in
ISO equipment standards
Surface chemical analysis
*
TC 204
Document management
applications
*
Biological evaluation of medical
devices — Part 6: Tests for local
effects after implantation
ISO/DIS
17515-1
2015-01-22
TC 209
Surface Chemical Analysis
- Electron Spectroscopies Proceedures for Identifying,
Estimating and Correcting for
Unintended Degradation by
X-rays in a Material Undergoing
Analysis by X-Ray Photoelectron
Spectroscopy
2015-01-21
Intelligent transport
systems
*
Intelligent transport systems
— Communications access for
land mobiles (CALM) - Evolved
Universal Terrestrial Radio Access Network (E-UTRAN) — Part
1: General usage
2015-01-09
Cleanrooms and associated controlled environments
ISO Update, Supplement to ISO Focus -- November 2014
ISO/DIS
14644-14
*
TC 210
ISO/DIS
18250-8
*
*
*
*
*
*
*
*
ISO/IEC/IEEE
DIS 29119-5
*
ISO/IEC
14496-3:2009/
DAmd 5
Cryogenic vessels — Pressurerelief accessories for cryogenic
service — Part 3: Sizing and
capacity determination
(Revision of ISO 21013-3:2006)
Activities relating to drinking
water and wastewater services
— Guidelines for the management of basic onsite domestic
wastewater services
Traditional Chinese Medicine —
Determination of heavy metals
in herbal medicines used in
Traditional Chinese Medicine
Additive manufacturing —
General principles — Part 1:
Terminology
*
*
Open Trusted Technology
Provider Standard (O-TTPS) —
Mitigating maliciously tainted
and counterfeit products
ISO/IEC DIS
23001-10
Information technology — ICCmanaged devices — Part 2:
Physical characteristics and test
methods for cards with devices
Information technology — Coding of audio-visual objects —
Part 3: Audio — Amendment
5: Support for Dynamic Range
Control
ISO Update, Supplement to ISO Focus -- November 2014
*
2015-03-17
2015-01-28
2014-12-30
2015-01-23
2015-01-09
Information technology — Coding of audio-visual objects
— Part 31: Video coding for
browsers
Information technology — MPEG
systems technologies — Part
10: Carriage of Timed Metadata
Metrics of Media in ISO Base
Media File
Format
*
Information technology — MPEG
audio technologies — Part 4:
Dynamic Range Control
ISO/IEC
23008-2:2013/
DAmd 4
*
Information technology — High
efficiency coding and media delivery in heterogeneous environments — Part 2: High efficiency
video coding — Amendment 4
ISO/IEC DIS
23008-3
*
*
ISO/IEC
23009-1:2014/
DAmd 2
*
ISO/IEC
24800-2:2011/
DAmd 1
*
ISO/IEC
24800-3:2010/
DAmd 1
*
ISO/IEC DIS
29170-2
*
2015-01-29
2015-01-29
Information technology — Coding of audio-visual objects —
Part 22: Open Font Format
ISO/IEC DIS
23003-4
ISO/IEC DIS
23008-12
Information technology — Mathematical Markup Language
(MathML) Version 3.0 2nd Edition
Software and systems engineering — Software testing — Part 5:
Keyword-driven testing
*
2015-01-07
2015-01-22
Information technology — Coding of audio-visual objects —
Part 11: Scene description and
application engine
(Revision of ISO/IEC
14496-11:2005)
2015-01-09
2015-01-09
(Revision of ISO/IEC 1449622:2009, ISO/IEC 1449622:2009/Amd 1:2010, ISO/IEC
14496-22:2009/Cor 1:2010, ISO/
IEC 14496-22:2009/Amd 2:2012)
ISO/IEC DIS
14496-31
Information technology
ISO/IEC DIS
40314
ISO/IEC DIS
18328-2
Health informatics — Information
models — Biomedical Research
Integrated Domain Group
(BRIDG) Model
Additive manufacturing
JTC 1
ISO/IEC DIS
20243
*
2015-01-21
Traditional chinese
medicine
TC 261
ISO/DIS
17296-1
ISO/IEC DIS
14496-22
Service activities relating
to drinking water supply
systems and wastewater
systems - Quality criteria
of the service and performance indicators
TC 249
ISO/DIS 18664
2015-03-03
Cryogenic vessels
TC 224
ISO/DIS 24521
Connectors for reservoir delivery
systems for healthcare applications — Part 8: Citrate-based anticoagulant solution for apheresis
applications
*
Health informatics
TC 220
ISO/DIS
21013-3
ISO/IEC DIS
14496-11
Quality management and
corresponding general aspects for medical devices
TC 215
ISO/DIS 14199
Cleanrooms and associated controlled environments — Part 14:
Assessment of suitability for use
of equipment by airborne particle
concentration
ISO/IEC DIS
18000-63
*
Information technology — High
efficiency coding and media delivery in heterogeneous environments — Part 3: 3D audio
Information technology — High
efficiency coding and media
delivery in heterogeneous environments — Part 12: Image file
format
Information technology — Dynamic adaptive streaming over
HTTP (DASH) — Part 1: Media
presentation description and
segment formats — Amendment
2: Spatial relationship description, generalized URL parameters and other extensions
Information technology — JPSearch — Part 2: Registration,
identification and management
of schema and ontology —
Amendment 1: JPEG Ontology
for Image Description
Information technology — JPSearch — Part 3: Query format
— Amendment 1: JPSearch API
Information technology — Advanced image coding and evaluation — Part 2: Evaluation procedure for nearly lossless coding
Information technology — Radio frequency identification for
item management — Part 63:
Parameters for air interface communications at 860 MHz to 960
MHz Type C
(Revision of ISO/IEC
18000-63:2013)
2015-01-14
2015-01-23
2015-01-16
2015-01-29
2015-01-14
2015-01-07
2015-01-09
2015-01-09
2015-01-16
2015-01-28
7
ISO/IEC DIS
29794-1
*
Information technology — Biometric sample quality — Part 1:
Framework
ISO/FDIS
12625-15
*
2015-01-22
(Revision of ISO/IEC
29794-1:2009)
ISO/IEC DIS
18384-1
ISO/IEC DIS
18384-2
ISO/IEC DIS
18384-3
*
*
*
Information technology — Reference Architecture for Service
Oriented Architecture (SOA
RA) — Part 1: Terminology and
Concepts for SOA
Information Technology - Reference Architecture for Service
Oriented Architecture (SOA RA)
— Part 2: Reference Architecture
for SOA Solutions
Distributed Application Platforms
and Services (DAPS) — Reference Architecture for Service
Oriented Architecture (SOA)
— Part 3: Service Oriented
Architecture Ontology
ISO/FDIS
12625-16
*
2015-01-14
TC 8
2015-01-14
2015-01-14
ISO/FDIS 9876
ISO/FDIS
22554
ISO/FDIS
14084-2
*
*
*
*
IIW
ISO/FDIS
14373
International Institute of
Welding
*
Resistance welding — Procedure
for spot welding of uncoated and
coated low carbon steels
2014-12-03
ISO/IEC FDIS
13273-1
ISO/IEC FDIS
13273-2
Joint Project Committee - Energy efficiency and
renewable energy sources
- Common terminology
*
*
TC 6
ISO/FDIS
12625-9
Energy efficiency and renewable energy sources — Common
international terminology — Part
1: Energy efficiency
Energy efficiency and renewable energy sources — Common
international terminology — Part
2: Renewable energy sources
*
ISO
29842:2011/
FDAmd 1
*
ISO
8455:2011/
FDAmd 1
*
ISO/FDIS
3233-3
*
Tissue paper and tissue products — Part 9: Determination of
ball burst strength
TC 42
ISO/FDIS
15781
Ships and marine technology
— Hydraulic hinged watertight
fireproof doors
2014-12-09
2014-12-29
Process diagrams for power
plants — Part 2: Graphical
symbols
2014-12-29
Crop protection equipment —
Spray deposit test for field crop
— Part 1: Measurement in a horizontal plane
Crop protection equipment —
Spray deposit test for field crop
— Part 2: Measurement in a crop
2014-12-07
2014-12-14
Sensory analysis — Methodology — Balanced incomplete block
designs — Amendment 1
2014-12-16
Green coffee — Guidelines for
storage and transport — Amendment 1
2014-12-23
Paints and varnishes
*
2015-01-10
2014-12-03
Ships and marine technology
— Propeller shaft revolution
indicators — Electric type and
electronic type
(Revision of ISO 22554:2007)
Food products
Paper, board and pulps
(Revision of ISO 12625-9:2005)
8
ISO/FDIS
24253-2
*
TC 35
2015-01-10
2014-12-29
Tractors and machinery for
agriculture and forestry
TC 34
(Revision of ISO 14373:2006)
JPC 2
TC 23
ISO/FDIS
24253-1
Vote
terminates
Ships and marine technology
— Marine facsimile receivers for
meteorological charts
Technical product
documentation
Period from 01 October to 31 October 2014
* Available in English only
2014-12-03
Ships and marine
technology
TC 10
These Final draft International Standards have been submitted to the
ISO member bodies for formal approval by the date shown
Tissue paper and tissue products — Part 16: Determination
of optical properties — Opacity
(paper backing) — Diffuse reflectance method
2014-12-03
(Revision of ISO 9876:1997)
ISO/FDIS
17941
FDIS circulated
Tissue paper and tissue products — Part 15: Determination
of optical properties — Measurement of brightness and
colour with C/2В° (indoor daylight)
illuminant
Paints and varnishes — Determination of the percentage volume
of non-volatile matter — Part
3: Determination by calculation
from the non-volatile-matter content determined in accordance
with ISO 3251, the density of the
coating material and the density
of the solvent in the coating
material
(Revision of ISO 23811:2009)
2014-12-24
Photography
*
Photography — Digital still
cameras — Measuring shooting
time lag, shutter release time lag,
shooting rate, and start-up time
(Revision of ISO 15781:2013)
2014-12-30
ISO Update, Supplement to ISO Focus -- November 2014
TC 44
ISO/FDIS
18278-1
Welding and allied
processes
*
TC 45
ISO/FDIS 1823
Resistance welding — Weldability — Part 1: General requirements for the evaluation of
weldability for resistance spot,
seam and projection welding of
metallic materials
(Revision of ISO 18278-1:2004)
ISO/FDIS
7494-2
Rubber hose and hose assemblies for oil suction and discharge service — Specification
TC 107
ISO/FDIS 4528
2014-12-17
*
TC 59
ISO/FDIS
12006-2
*
*
TC 108
Building construction — Organization of information about
construction works — Part 2:
Framework for classification
(Revision of ISO 12006-2:2001)
*
Plastics — Determination of
creep behaviour — Part 1: Tensile creep — Amendment 1
Textile machinery — Guide to the
design of textile machinery for
reduction of the noise emissions
*
*
TC 119
ISO/FDIS
14317
Vitreous and porcelain enamel
finishes — Guide to selection of
test methods for vitreous and
porcelain enamelled areas of
articles
(Revision of ISO 4528:2000)
2014-12-03
Mechanical vibration,
shock and condition
monitoring
2014-12-29
Mechanical vibration — Evaluation of machine vibration by
measurements on non-rotating
parts — Part 21: Horizontal axis
wind turbines with gearbox
Mechanical vibration — Measurement and evaluation of human exposure to hand-transmitted vibration — Part 2: Practical
guidance for measurement at the
workplace — Amendment 1
2014-12-28
2014-12-24
Powder metallurgy
*
2014-12-17
Sintered metal materials excluding hardmetals — Determination
of compressive yield strength
2014-12-29
(Revision of ISO 14317:2006)
Textile machinery and
accessories
*
ISO/FDIS
10816-21
ISO 53492:2001/FDAmd
1
Plastics
TC 72
ISO/FDIS
23771
2014-12-17
Buildings and civil engineering works
TC 61
ISO 8991:2003/FDAmd
1
Rubber hoses and hose assemblies, wire or textile reinforced,
for dredging applications —
Specification — Amendment 1
2014-12-10
Metallic and other inorganic coatings
(Revision of ISO 1823-1:1997,
ISO 1823-2:1997)
ISO
28017:2011/
FDAmd 1
Dentistry — Dental units — Part
2: Air, water, suction and wastewater system
(Revision of ISO 11144:1995,
ISO 7494-2:2003)
2014-12-17
Rubber and rubber
products
*
*
TC 120
ISO/FDIS
14931
Leather
*
2014-12-03
Leather — Guide to the selection
of leather for apparel (excluding
furs)
2014-12-03
(Revision of ISO 14931:2004)
TC 76
ISO/FDIS
11040-4
ISO/FDIS
11040-7
Transfusion, infusion
and injection, and blood
processing equipment for
medical and pharmaceutical use
*
*
TC 98
ISO/FDIS 2394
Prefilled syringes — Part 4:
Glass barrels for injectables and
sterilized subassembled syringes
ready for filling
(Revision of ISO 11040-4:2007)
Prefilled syringes — Part 7:
Packaging systems for sterilized
subassembled syringes ready
for filling
TC 121
ISO/FDIS
5356-1
2014-12-28
*
TC 131
ISO/FDIS
18413
*
TC 138
ISO/FDIS 3501
*
(Revision of ISO 2394:1998)
TC 106
ISO/FDIS
24234.2
Dentistry
*
Dentistry — Dental amalgam
2014-12-03
(Revision of ISO 24234:2004,
ISO 24234:2004/Amd 1:2011)
ISO/FDIS
6259-3
2014-12-10
Hydraulic fluid power — Cleanliness of parts and components
— Inspection document and
principles related to contaminant
collection, analysis and data
reporting
(Revision of ISO 18413:2002)
2014-12-14
Plastics pipes, fittings and
valves for the transport of
fluids
General principles on reliability
for structures
2014-12-04
Anaesthetic and respiratory equipment — Conical
connectors — Part 1: Cones and
sockets
(Revision of ISO 5356-1:2004)
Fluid power systems
2014-12-28
Bases for design of
structures
*
Anaesthetic and respiratory
equipment
*
Plastics piping systems — Mechanical joints between fittings
and pressure pipes — Test
method for resistance to pull-out
under constant longitudinal force
(Revision of ISO 3501:1976)
Thermoplastics pipes — Determination of tensile properties —
Part 3: Polyolefin pipes
2014-12-31
2014-12-03
(Revision of ISO 6259-3:1997)
ISO Update, Supplement to ISO Focus -- November 2014
9
ISO/FDIS
13844
ISO/FDIS
13845
*
*
TC 147
ISO/FDIS
17690
ISO/FDIS 9697
Plastics piping systems — Elastomeric-sealing-ring-type socket
joints for use with plastic pipes
— Test method for leaktightness
under negative pressure, angular
deflection and deformation
(Revision of ISO 13844:2000)
Plastics piping systems — Elastomeric-sealing-ring-type socket
joints for use with thermoplastic
pipes — Test method for leaktightness under internal pressure
and with angular deflection
(Revision of ISO 13845:2000)
ISO/FDIS
22077-1
2014-12-24
*
Water quality — Determination of
available free cyanide (pH 6) using flow injection analysis (FIA),
gas-diffusion and amperometric
detection
Water quality — Measurement of
gross beta activity in non-saline
water — Thick source method
TC 221
2014-12-24
*
TC 156
ISO/FDIS
18086
*
Corrosion of metals and alloys
— Determination of AC corrosion
— Protection criteria
Metallic materials — Tensile testing — Part 3: Method of test at
low temperature
2014-12-23
2014-12-28
*
Optics and photonics — Environmental test methods — Part
3: Mechanical stress
(Revision of ISO 9022-3:1998)
ISO/FDIS
9022-6
*
Optics and photonics — Environmental test methods — Part
6: Dust
(Revision of ISO 9022-6:1994)
ISO/FDIS
9022-7
ISO/FDIS
9022-8
*
*
TC 190
ISO/FDIS
11074
2014-12-28
2014-12-03
10
*
Solid biofuels — Determination
of total content of carbon, hydrogen and nitrogen
2014-12-31
Solid biofuels — Determination
of minor elements
International Union of
Leather Technologists and
Chemists Societies
*
JTC 1
ISO/IEC/IEEE
FDIS 26531
Soil quality — Vocabulary
*
Leather — Chemical tests
— Determination of tetrachlorophenol-, trichlorophenol-,
dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content
(Revision of ISO 17070:2006)
Leather — Tests for colour fastness — Change in colour with
accelerated ageing
2014-12-03
2014-12-03
(Revision of ISO 17228:2005)
ISO/IEC/IEEE
FDIS 23026
Optics and photonics — Environmental test methods — Part
8: High pressure, low pressure,
immersion
(Revision of ISO 9022-8:1994)
Health informatics
*
IULTCS
ISO/FDIS
17228
2014-12-17
TC 215
ISO/FDIS
16968
Solid biofuels
2014-12-21
Optics and photonics — Environmental test methods — Part
7: Resistance to drip or rain
(Revision of ISO 9022-7:2005)
(Revision of ISO 11074:2005,
ISO 11074:2005/Cor 1:2006)
Geosynthetics — Part 2: Symbols and Pictograms
(Revision of ISO 10318:2005)
TC 238
ISO/FDIS
17070
Soil quality
*
*
2014-12-10
Optics and photonics
ISO/FDIS
9022-3
Geosynthetics — Part 1: Terms
and definitions
2014-12-24
ISO/FDIS
16948
(Revision of ISO 15579:2000)
TC 172
Geosynthetics
*
2014-12-24
Mechanical testing of
metals
*
2014-12-21
(Revision of ISO 10318:2005)
Corrosion of metals and
alloys
TC 164
ISO/FDIS
6892-3
Water quality - Determination of
the toxicity of water samples on
the embryo-larval development
of Japanese oyster (Crassostrea
gigas) and blue mussel (Mytilus
edulis or galloprovincialis)
ISO/FDIS
10318-1
ISO/FDIS
10318-2
(Revision of ISO 9697:2008)
ISO/FDIS
17244
Health informatics — Medical
waveform format — Part 1:
Encoding rules
(Revision of ISO/TS
11073-92001:2007)
Water quality
*
*
Information technology
*
*
ISO/IEC
1449612:2012/
FDAmd 3
*
ISO/IEC
1544412:2012/
FDAmd 3
*
ISO/IEC
23002-4:2014/
FDAmd 2
*
Systems and software engineering — Engineering and
management of websites for
systems, software, and services
information
(Revision of ISO/IEC
23026:2006)
Systems and software engineering — Content management for product life-cycle,
user and service management
documentation
Information technology — Coding of audio-visual objects
— Part 12: ISO base media
file format — Amendment 3: Enhanced audio support and other
improvements
Information technology — JPEG
2000 image coding system —
Part 12: ISO base media file
format — Amendment 3: Font
streams and other improvements
to file format
Information technology — MPEG
video technologies — Part 4:
Video tool library — Amendment
2: FU and FN descriptions for
HEVC
2014-12-30
2014-12-30
2014-12-11
2014-12-11
2014-12-29
ISO Update, Supplement to ISO Focus -- November 2014
ISO/IEC FDIS
23008-5
ISO/IEC FDIS
23008-8
ISO/IEC FDIS
23008-11
ISO/IEC FDIS
20006-2
ISO/IEC
19794-1:2011/
FDAmd 2
ISO/IEC FDIS
29794-6
*
*
*
*
*
*
Information technology — High
efficiency coding and media
delivery in heterogeneous
environments — Part 5: HEVC
Conformance testing and reference software
Information technology — High
efficiency coding and media delivery in heterogeneous environments — Part 8: Conformance
Specification for HEVC
Information technology — High
efficiency coding and media
delivery in heterogeneous
environments — Part 11: MPEG
Media Transport Composition
Information
ISO
18289:2014
2014-12-30
ISO
18296:2014
*
Ships and marine technology — Navigation and shallow-water engineering
vessels — Anchor winches
2014-12-30
Ships and marine technology — Shipshifting winches
ISO
16556:2014
*
Large yachts — Deck equipment —
Anchoring equipments
B
2014-12-30
2014-12-23
Information technology — Biometric data interchange formats
— Part 1: Framework — Amendment 2: Framework for XML
encoding
2014-12-23
2014-12-17
Standards published
TC 17
Steel
ISO
683-17:2014
Heat-treated steels, alloy steels and
free-cutting steels — Part 17: Ball and
roller bearing steels
TC 20
ISO
27027:2014
ISO
16919:2014
*
*
Aerospace — Solid-state remote
power controllers — General performance requirements
Space data and information transfer
systems — Requirements for bodies
providing audit and certification of candidate trustworthy digital repositories
TC 22
Road vehicles
ISO
15007-1:2014
Road vehicles — Measurement of
driver visual behaviour with respect
to transport information and control
systems — Part 1: Definitions and
parameters
TC 23
Tractors and machinery for agriculture and forestry
ISO
11783-3:2014
Tractors and machinery for agriculture
and forestry — Serial control and communications data network — Part 3:
Data link layer
ISO
10370:2014
ISO
17315:2014
Price
group
Outsourcing
ISO
17325-2:2014
ISO
18309:2014
ISO
17907:2014
*
*
Ships and marine technology — Marine
environment protection — Oil booms
— Part 2: Strength and performance
requirements
Ships and marine technology —
Incinerator sizing and selection
— Guidelines
Ships and marine technology — Single point mooring arrangements for
conventional tankers
ISO Update, Supplement to ISO Focus -- November 2014
G
*
Petroleum products — Determination
of carbon residue — Micro method
A
*
Petroleum products and other liquids
— Ethanol — Determination of total
acidity by potentiometric titration
B
Small tools
ISO
26623-1:2014
Polygonal taper interface with flange
contact surface — Part 1: Dimensions
and designation of shanks
B
Polygonal taper interface with flange
contact surface — Part 2: Dimensions
and designation of receivers
A
ISO
26623-2:2014
Ships and marine technology
*
C
TC 29
Guidance on outsourcing
G
TC 8
D
B
** French version of standard previously published in English only
*
D
Petroleum products and
lubricants
* Available in English only
ISO
37500:2014
D
Aircraft and space vehicles
TC 28
New International Standards published between 01 October and 31
October 2014
PC 259
B
B
Information technology for learning, education and training —
Information model for competency — Part 2: Proficiency level
information model
Information technology — Biometric sample quality — Part 6:
Iris image data
*
TC 31
Tyres, rims and valves
ISO
14960-1:2014
Tubeless tyres — Valves and components — Part 1: Test methods
B
B
C
ISO
14960-2:2014
TC 34
Tubeless tyres — Valves and components — Part 2: Clamp-in tubeless tyre
valve-test method
B
Food products
11
ISO
11133:2014
*
ISO
22004:2014
ISO 2451:2014
Microbiology of food, animal feed and
water — Preparation, production, storage and performance testing of culture
media
Food safety management systems —
Guidance on the application of ISO
22000
*
H
TC 51
Pallets for unit load method of
materials handling
ISO
18613:2014
Pallets for materials handling — Repair
of flat wooden pallets
C
E
Cocoa beans — Specification
TC 58
Gas cylinders
ISO 3807:2013
Gas cylinders — Acetylene cylinders —
Basic requirements and type testing
E
B
TC 35
ISO 4618:2014
ISO
10297:2014
Paints and varnishes
*
Paints and varnishes — Terms and
definitions
F
A
ISO
16474-3:2013
Paints and varnishes — Methods of
exposure to laboratory light sources —
Part 3: Fluorescent UV lamps
TC 36
ISO 71:2014
ISO 7832:2014
*
*
TC 37
ISO
24156-1:2014
TC 39
ISO/TR
17529:2014
Plastics
Cinematography — 16 mm negative
photographic sound record on 16 mm,
35/16 mm and 35/32 mm motion-picture film — Positions and dimensions
ISO
17855-1:2014
Plastics — Polyethylene (PE) moulding and extrusion materials — Part
1: Designation system and basis for
specifications
Cinematography — Photoelectric
output factor of photographic-type
audio-level test films — Measurement
and calibration
A
Graphic notations for concept modelling in terminology work and its relationship with UML — Part 1: Guidelines
for using UML notation in terminology
work
TC 67
Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas
industries
ISO
21809-2:2014
Petroleum and natural gas industries
— External coatings for buried or
submerged pipelines used in pipeline transportation systems — Part
2: Single layer fusion-bonded epoxy
coatings
B
D
TC 69
Applications of statistical
methods
ISO
22514-8:2014
Statistical methods in process management — Capability and performance — Part 8: Machine performance
of a multi-state production process
Machine tools
*
Machine tools — Practical guidance
and example of risk assessment on
electro-discharge machines
ISO
815-1:2014
Rubber, vulcanized or thermoplastic — Determination of compression
set — Part 1: At ambient or elevated
temperatures
*
*
Rubber, raw natural, and rubber latex,
natural — Determination of nitrogen
content
D
TC 83
Sports and other recreational
facilities and equipment
ISO 9462:2014
Alpine ski-bindings — Requirements
and test methods
C
D
Isobutene-isoprene rubber (IIR) —
Evaluation procedure
ISO
10161-2:2014
ISO
21127:2014
ISO/TR
26122:2008
Information and documentation
*
Information and documentation —
Open Systems Interconnection —
Interlibrary Loan Application Protocol
Specification — Part 2: Protocol implementation conformance statement
(PICS) proforma
Information and documentation — A
reference ontology for the interchange
of cultural heritage information
F
B
F
F
E
ISO
13992:2014
Alpine touring ski-bindings — Requirements and test methods
F
TC 84
Devices for administration
of medicinal products and
catheters
ISO
11070:2014
Sterile single-use intravascular introducers, dilators and guidewires
B
TC 46
Calculation of micro-pitting load
capacity of cylindrical spur and helical
gears — Part 2: Examples of calculation for micropitting
TC 61
Rubber and rubber products
ISO 2302:2014
C
Gears
*
Cinematography
TC 45
ISO 1656:2014
TC 60
ISO/TR
15144-2:2014
Terminology and other language
and content resources
*
Gas cylinders — Cylinder valves —
Specification and type testing
D
E
TC 87
Cork
ISO 7322:2014
Composition cork — Test methods
A
H
Information and documentation —
Work process analysis for records
TC 94
Personal safety -- Protective
clothing and equipment
C
12
ISO Update, Supplement to ISO Focus -- November 2014
ISO
16900-1:2014
Respiratory protective devices —
Methods of test and test equipment —
Part 1: Determination of inward leakage
TC 96
ISO
9928-2:2014
ISO
4210-4:2014
*
Mobile cranes — Experimental determination of crane performance — Part
2: Structural competence under static
loading
TC 106
Dentistry
ISO
13116:2014
Dentistry — Test Method for Determining Radio-Opacity of Materials
E
ISO
4210-6:2014
Cranes — Crane operating manual —
Part 2: Mobile cranes
A
ISO
11662-2:2014
F
ISO
4210-8:2014
*
*
TC 110
Industrial trucks
ISO
22915-9:2014
Industrial trucks — Verification of stability — Part 9: Counterbalanced trucks
with mast handling freight containers of
6 m (20 ft) length and longer
TC 114
Horology
ISO
10552:2014
Timekeeping instruments — Crowns
and sealed tubes — Designs and
dimensions
TC 121
Anaesthetic and respiratory
equipment
ISO 5367:2014
Anaesthetic and respiratory equipment
— Breathing sets and connectors
B
B
Implants for surgery — Wear of total
knee-joint prostheses — Part 3: Loading and displacement parameters for
wear-testing machines with displacement control and corresponding environmental conditions for test
E
Tobacco and tobacco products
ISO
10315:2013
Cigarettes — Determination of nicotine
in smoke condensates — Gas-chromatographic method
ISO/TR
19478-1:2014
*
ISO and Health Canada intense smoking parameters — Part 1: Results of an
international machine smoking study
TC 131
Fluid power systems
ISO
6358-3:2014
Pneumatic fluid power — Determination of flow-rate characteristics
of components using compressible
fluids — Part 3: Method for calculating
steady-state flow-rate characteristics
of systems
TC 145
Graphical symbols
ISO
9186-3:2014
Graphical symbols — Test methods
— Part 3: Method for testing symbol
referent association
TC 149
Cycles
ISO Update, Supplement to ISO Focus -- November 2014
Mechanical testing of metals
ISO
16842:2014
Metallic materials — Sheet and strip —
Biaxial tensile testing method using a
cruciform test piece
TC 168
Prosthetics and orthotics
ISO
8549-4:2014
Prosthetics and orthotics — Vocabulary — Part 4: Terms relating to limb
amputation
TC 172
B
C
D
A
Optics and photonics
*
Optics and photonics — Environmental
test methods — Part 4: Salt mist
B
Suction catheters for use in the respiratory tract
TC 126
TC 164
ISO
9022-4:2014
E
ISO 8836:2014
B
Implants for surgery
Dentistry — Fluoride varnishes
A
Cycles — Safety requirements for bicycles — Part 8: Pedal and drive system
test methods
Implants for surgery — Wear of total
hip-joint prostheses — Part 1: Loading
and displacement parameters for weartesting machines and corresponding
environmental conditions for test
C
ISO
17730:2014
D
ISO
14242-1:2014
ISO
14243-3:2014
Dentistry — Operating lights
Cycles — Safety requirements for
bicycles — Part 6: Frame and fork test
methods
TC 150
B
ISO 9680:2014
Cycles — Safety requirements for bicycles — Part 4: Braking test methods
E
Cranes
*
*
C
ISO
17328:2014
ISO
14490-6:2014
Optics and photonics — Optical materials and components — Test method
for refractive index of infrared optical
materials
*
Optics and photonics — Test methods
for telescopic systems — Part 6: Test
methods for veiling glare index
TC 173
Assistive products for persons
with disability
ISO
7176-1:2014
Wheelchairs — Part 1: Determination
of static stability
C
B
E
G
G
ISO
17069:2014
*
Accessible design — Consideration
and assistive products for accessible
meeting
TC 174
Jewellery
ISO
11427:2014
Jewellery — Determination of silver
in silver jewellery alloys — Volumetric
(potentiometric) method using potassium bromide
TC 181
ISO
8124-4:2014
C
TC 183
C
A
Safety of toys
*
Safety of toys — Part 4: Swings, slides
and similar activity toys for indoor and
outdoor family domestic use
G
Copper, lead, zinc and nickel
ores and concentrates
13
ISO
13547-1:2014
*
TC 184
ISO
22400-1:2014
*
Automation systems and integration
— Key performance indicators (KPIs)
for manufacturing operations management — Part 1: Overview, concepts
and terminology
*
Soil quality — Effects of pollutants on
earthworms — Part 3: Guidance on
the determination of effects in field
situations
Sterilization of health care
products
ISO
11140-1:2014
Sterilization of health care products —
Chemical indicators — Part 1: General
requirements
TC 202
ISO
14595:2014
ISO/TR
17465-1:2014
ISO 292812:2013/Amd
1:2014
*
*
Microbeam analysis — Electron
probe microanalysis — Guidelines
for the determination of experimental
parameters for wavelength dispersive
spectroscopy
Microbeam analysis — Electron probe
microanalysis — Guidelines for the
specification of certified reference
materials (CRMs)
*
*
*
Electronic Fee Collection (EFC) — Interface definition between DSRC-OBE
and external in-vehicle devices
Intelligent transport systems — Cooperative ITS — Part 1: Terms and
definitions
Intelligent transport systems — Communication access for land mobiles
(CALM) — Non-IP networking — Part
2: Legacy system support — Amendment 1
*
Health informatics — Capacity-based
eHealth architecture roadmap — Part
2: Architectural components and maturity model
Cosmetics
ISO
15819:2014
Cosmetics — Analytical methods
— Nitrosamines: Detection and
determination of N-nitrosodiethanolamine (NDELA) in cosmetics by
HPLC-MS-MS
TC 218
ISO
13061-2:2014
14
Societal security — Terminology
ISO
13687:2014
Tourism and related services
*
B
TC 242
ISO
50003:2014
C
E
Energy Management
*
C
*
Physical and mechanical properties of
wood — Test methods for small clear
wood specimens — Part 1: Determination of moisture content for physical
and mechanical tests
Physical and mechanical properties of
wood — Test methods for small clear
wood specimens — Part 2: Determination of density for physical and
mechanical tests
C
Additive manufacturing
ISO
17296-3:2014
Additive manufacturing — General
principles — Part 3: Main characteristics and corresponding test methods
C
Additive manufacturing — General
principles — Part 4: Overview of data
processing
B
ISO
17296-4:2014
ISO/IEC TS
17021-7:2014
Committee on conformity
assessment
*
C
JTC 1
E
Energy management systems — Requirements for bodies providing audit
and certification of energy management systems
TC 261
CASCO
Conformity assessment — Requirements for bodies providing audit and
certification of management systems
— Part 7: Competence requirements
for auditing and certification of road
traffic safety management systems
A
Information technology
ISO/IEC 88243:2008/Cor
1:2014
*
ISO/IEC
10373-5:2014
*
Information technology — Abstract
Syntax Notation One (ASN.1): Constraint specification — Part 3: — Technical Corrigendum 1
free
Identification cards — Test methods —
Part 5: Optical memory cards
C
B
ISO/IEC
11694-5:2014
*
XZ
ISO/IEC
TR 118019901:2014
*
ISO/IEC
24775-1:2014
*
H
Identification cards — Optical memory
cards — Linear recording method —
Part 5: Data format for information
interchange for applications using ISO/
IEC 11694-4
C
Information technology — Generic
cabling for customer premises — Part
9901: Guidance for balanced cabling
in support of at least 40 Gbit/s data
transmission
F
Information technology — Storage
management — Part 1: Overview
D
B
Timber
*
Tourism and related services — Yacht
harbours — Minimum requirements
D
Health informatics
TC 217
ISO
13061-1:2014
ISO
22300:2012
TC 228
Intelligent transport systems
TC 215
ISO/TR
14639-2:2014
Societal security
Microbeam analysis
TC 204
ISO/TS
16785:2014
TC 223
B
Soil quality
TC 198
ISO
14594:2014
C
Automation systems and
integration
TC 190
ISO
11268-3:2014
Copper, lead, zinc and nickel sulfide
concentrates — Determination of arsenic — Part 1: Iron hydroxide concentration and inductively coupled plasma
atomic emission spectrometric method
ISO/IEC
24775-2:2014
ISO/IEC
24775-3:2014
*
*
A
ISO/IEC
24775-4:2014
*
Information technology — Storage
management — Part 2: Common
Architecture
H
Information technology — Storage
management — Part 3: Common
Profiles
H
Information technology — Storage
management — Part 4: Block Devices
H
A
ISO Update, Supplement to ISO Focus -- November 2014
ISO/IEC
27000:2014
ISO/IEC
1449618:2004/Amd
1:2014
ISO/IEC
17788:2014
Information technology — Security
techniques — Information security
management systems — Overview and
vocabulary
*
*
Information technology — Coding
of audio-visual objects — Part 18:
Font compression and streaming —
Amendment 1: Updated semantics
of decoderSpecificInfo and font data
description for ISOBMFF
ISO 16931:2009
E
*
TC 38
Textiles
ISO 105-B07:2009
XZ
Information technology — Cloud computing — Overview and vocabulary
ISO 105-F02:2009
ISO 105-F09:2009
ISO 105-G02:1993
(reconfirmed)
TC 44
Welding and allied processes
ISO 2560:2009
B
ISO/IEC
17789:2014
ISO 22959:2009
Information technology — Cloud computing — Reference architecture
G
ISO 3834-1:2005
(reconfirmed)
ISO 3834-2:2005
(reconfirmed)
ISO 3834-3:2005
(reconfirmed)
ISO 3834-4:2005
(reconfirmed)
ISO 15607:2003
(reconfirmed)
ISO 15609-4:2009
ISO 15611:2003
(reconfirmed)
ISO 15614-6:2006
(reconfirmed)
ISO 17663:2009
Standards confirmed
The following International Standards are confimred for a five year
period:
ISO 22827-1:2005
(reconfirmed)
ISO 22827-2:2005
(reconfirmed)
TC 61
Plastics
ISO 6721-3:1994
(reconfirmed)
ISO 6721-12:2009
ISO 21509:2006
TC 2
Fasteners
ISO 8752:2009
ISO 10669:1999
(reconfirmed)
ISO 25217:2009
ISO 25762:2009
(reconfirmed)
ISO 3219:1993
(reconfirmed)
ISO 4593:1993
(reconfirmed)
ISO 6383-2:1983
(reconfirmed)
ISO 10644:2009
ISO 7765-1:1988
(reconfirmed)
ISO 10673:2009
ISO 7765-2:1994
(reconfirmed)
ISO 8510-2:2006
(reconfirmed)
ISO 14631:1999
(reconfirmed)
ISO 13337:2009
ISO 7721-2:1990
TC 6
(reconfirmed)
Paper, board and pulps
ISO 8254-1:2009
ISO 17087:2006
(reconfirmed)
ISO 28000:2007
ISO 19212:2006
(reconfirmed)
ISO 15736:2006
(reconfirmed)
ISO 61:1976
(reconfirmed)
ISO 18813:2006
(reconfirmed)
ISO 119:1977
(reconfirmed)
Steel
ISO 120:1977
(reconfirmed)
ISO 9444-1:2009
ISO 172:1978
(reconfirmed)
ISO 9444-2:2009
ISO 3001:1999
(reconfirmed)
Aircraft and space vehicles
ISO 7327:1994
(reconfirmed)
(reconfirmed)
ISO 8975:1989
(reconfirmed)
ISO 8056-2:1988
(reconfirmed)
ISO 8988:2006
(reconfirmed)
TC 28
Petroleum products and lubricants
ISO 10082:1999
(reconfirmed)
ISO 6615:1993
(reconfirmed)
ISO 14526-1:1999
(reconfirmed)
TC 29
Small tools
ISO 14526-2:1999
(reconfirmed)
ISO 603-11:1999
(reconfirmed)
ISO 14526-3:1999
(reconfirmed)
ISO 2976:2005
(reconfirmed)
ISO 14527-1:1999
(reconfirmed)
ISO 3366:1999
(reconfirmed)
ISO 14527-2:1999
(reconfirmed)
ISO 3919:2005
(reconfirmed)
ISO 14527-3:1999
(reconfirmed)
ISO 6344-1:1998
(reconfirmed)
ISO 14528-1:1999
(reconfirmed)
ISO 6344-2:1998
(reconfirmed)
ISO 14528-2:1999
(reconfirmed)
ISO 15636:2003
(reconfirmed)
ISO 14528-3:1999
(reconfirmed)
TC 34
Food products
ISO 14529-1:1999
(reconfirmed)
ISO 14529-2:1999
(reconfirmed)
TC 8
TC 17
TC 20
ISO 2635:2003
Ships and marine technology
ISO 660:2009
ISO Update, Supplement to ISO Focus -- November 2014
15
ISO 14529-3:1999
(reconfirmed)
TC 92
ISO 14530-1:1999
(reconfirmed)
Fire safety
ISO 5658-2:2006
ISO 14530-2:1999
(reconfirmed)
TC 96
ISO 14530-3:1999
(reconfirmed)
ISO 4301-2:2009
ISO 14849:1999
(reconfirmed)
ISO 11661:1998
(reconfirmed)
ISO 14898:1999
(reconfirmed)
TC 108
ISO 15038:1999
(reconfirmed)
Mechanical vibration, shock and condition monitoring
ISO 15252-1:1999
(reconfirmed)
ISO 14839-1:2002
(reconfirmed)
ISO 15252-2:1999
(reconfirmed)
ISO 18649:2004
(reconfirmed)
ISO 15252-3:1999
(reconfirmed)
ISO 20283-3:2006
(reconfirmed)
Cranes
ISO 21627-1:2009
ISO 22266-1:2009
ISO 21627-2:2009
ISO 5982:2001
(reconfirmed)
ISO 21627-3:2009
ISO 13091-2:2003
(reconfirmed)
ISO 527-5:2009
ISO 13753:1998
(reconfirmed)
ISO 1889:2009
ISO 14835-1:2005
(reconfirmed)
ISO 1890:2009
TC 112
Vacuum technology
ISO 15034:1999
(reconfirmed)
ISO 1609:1986
(reconfirmed)
ISO 15040:1999
(reconfirmed)
TC 113
Hydrometry
TC 63
Glass containers
ISO 9825:2005
(reconfirmed)
ISO 9100-1:2005
(reconfirmed)
ISO 4363:2002
(reconfirmed)
ISO 9100-2:2005
(reconfirmed)
TC 127
Earth-moving machinery
ISO 9100-3:2005
(reconfirmed)
ISO 10263-1:2009
ISO 9100-5:2005
(reconfirmed)
ISO 10263-2:2009
ISO 9100-6:2005
(reconfirmed)
ISO 10263-3:2009
ISO 9100-7:2005
(reconfirmed)
ISO 10263-4:2009
ISO 9100-10:2005
(reconfirmed)
ISO 10263-5:2009
ISO 9100-11:2005
(reconfirmed)
ISO 10263-6:2009
ISO 9100-12:2005
(reconfirmed)
ISO 17063:2003
(reconfirmed)
ISO 9100-13:2005
(reconfirmed)
TC 135
Non-destructive testing
ISO 9100-14:2005
(reconfirmed)
ISO 10375:1997
(reconfirmed)
TC 67
Materials, equipment and offshore
structures for petroleum, petrochemical and natural gas industries
ISO 12710:2002
(reconfirmed)
ISO 18175:2004
(reconfirmed)
ISO 5576:1997
(reconfirmed)
ISO 14096-1:2005
(reconfirmed)
ISO 20807:2004
(reconfirmed)
TC 138
Plastics pipes, fittings and valves for
the transport of fluids
ISO 7684:1997
(reconfirmed)
TC 146
Air quality
ISO 8760:1990
(reconfirmed)
ISO 8761:1989
(reconfirmed)
ISO 16740:2005
(reconfirmed)
TC 153
Valves
ISO 6552:1980
(reconfirmed)
ISO 6554:1980
(reconfirmed)
ISO 6948:1981
(reconfirmed)
ISO 7841:1988
(reconfirmed)
ISO 23936-1:2009
ISO 10417:2004
(reconfirmed)
ISO 10432:2004
(reconfirmed)
ISO 17078-3:2009
ISO 17824:2009
TC 69
Applications of statistical methods
ISO 2859-1:1999
(reconfirmed)
ISO 2859-10:2006
(reconfirmed)
ISO 3951-5:2006
(reconfirmed)
ISO 8422:2006
(reconfirmed)
ISO 18414:2006
(reconfirmed)
TC 87
Cork
ISO 21128:2006
(reconfirmed)
TC 89
Wood-based panels
ISO 9424:2003
(reconfirmed)
ISO 7842:1988
(reconfirmed)
ISO 9426:2003
(reconfirmed)
ISO 9427:2003
(reconfirmed)
TC 173
Assistive products for persons with
disability
ISO 16978:2003
(reconfirmed)
ISO 7176-21:2009
ISO 16979:2003
(reconfirmed)
ISO 16840-4:2009
ISO 16983:2003
(reconfirmed)
TC 178
ISO 16984:2003
(reconfirmed)
ISO 7465:2007
ISO 16999:2003
(reconfirmed)
ISO 14798:2009
ISO 20585:2005
(reconfirmed)
TC 188
16
Lifts, escalators and moving walks
Small craft
ISO Update, Supplement to ISO Focus -- November 2014
ISO 14509-2:2006
(reconfirmed)
Period from 01 October to 31 October 2014
ISO 10862:2009
TC 193
Natural gas
ISO 10101-1:1993
(reconfirmed)
TC 31
Tyres, rims and valves
ISO 10101-2:1993
(reconfirmed)
ISO 14960:2004
(replaced by ISO 14960-1:2014)
ISO 10101-3:1993
(reconfirmed)
TC 61
Plastics
ISO 11541:1997
(reconfirmed)
ISO 1872-1:1993
(replaced by ISO 17855-1:2014)
ISO 14111:1997
(reconfirmed)
TC 110
Industrial trucks
TC 209
Cleanrooms and associated controlled
environments
ISO 10525:1997
(replaced by ISO 22915-9:2014)
TC 127
Earth-moving machinery
ISO/TS
20474-14:2008
(replaced by )
ISO 14698-1:2003
ISO 14698-2:2003
TC 213
Dimensional and geometrical product
specifications and verification
TC 131
Fluid power systems
ISO 6358:1989
(replaced by ISO 6358-1:2013, ISO 63582:2013, ISO 6358-3:2014)
ISO 463:2006
(reconfirmed)
ISO 3650:1998
(reconfirmed)
TC 218
Timber
ISO 8785:1998
(reconfirmed)
ISO 3131:1975
(replaced by ISO 13061-2:2014)
ISO 13565-3:1998
(reconfirmed)
TC 216
Footwear
ISO 19954:2003
(reconfirmed)
TC 226
Materials for the production of primary
aluminium
ISO 8007-3:2003
(reconfirmed)
ISO 8008:2005
(reconfirmed)
ISO 20203:2005
(reconfirmed)
TC 227
Springs
ISO 26909:2009
Tourism and related services
ISO 11107:2009
Meetings called for the month of September are not in this edition.
** Provisional
September-November 2014
ISO 11121:2009
JTC 1
(update at 01 October 2014)
* Information definite but meeting not yet formally convened
ISO 26910-1:2009
TC 228
Meeting calendar
Information technology
ISO/IEC
29341-2:2008
ISO/IEC
29341-3-2:2008
4-4
Beijing (China)
TC 83
Sports and other
recreational facilities
and equipment
November 2014
2-7
Belfort (France)
TC 184/SC 4
Automation systems
and integration/Industrial data
3-4
Tel Aviv (Israel)
TC 282/SC 1
Water re-use/Treated
wastewater re-use for
Irrigation
ISO/IEC
29341-3-12:2008
3-5
Madrid (Spain)
PC 252
Natural gas fuelling
stations for vehicles
ISO/IEC
29341-3-13:2008
3-5
Washington, D.C
(USA)
TC 241
Road traffic safety
management systems
ISO/IEC
29341-4-12:2008
3-7
Singapore
(Singapore)
PC 277
Sustainable
procurement
ISO/IEC
14443-4:2008
3-7
Cape Town
(South Africa)
TC 45
Rubber and rubber
products
ISO/IEC
15693-3:2009
3-7
Cape Town
(South Africa)
TC 45/SC 1
Rubber and rubber
products/Rubber and
plastics hoses and
hose assemblies
3-7
Cape Town
(South Africa)
TC 45/SC 2
Rubber and rubber
products/Testing and
analysis
3-7
Wuhan (China)
TC 183
Copper, lead, zinc
and nickel ores and
concentrates
3-7
New Delhi (India)
TC 229
Nanotechnologies
3-7
Lisbon (Portugal)
TC 282
Water re-use
ISO/IEC
29341-3-3:2008
ISO/IEC
29341-3-11:2008
Standards withdrawn
ISO Update, Supplement to ISO Focus -- November 2014
17
5-6
Lisbon (Portugal)
TC 34/SC 4
Food products/Cereals and pulses
5-6
Tel Aviv (Israel)
TC 282/SC 3
Water re-use/Risk
and performance
evaluation of water
re-use systems
6
Cape Town
(South Africa)
TC 45/SC 4
Rubber and rubber
products/Products
(other than hoses)
6
Istanbul (Turkey)
TC 270
Plastics and rubber
machines
6
Lisbon (Portugal)
TC 282/SC 2
Water re-use/Water
re-use in urban areas
7
San Diego (USA)
TC 22/SC 10
Road vehicles/Impact
test procedures
7
San Diego (USA)
TC 22/SC 12
Road vehicles/Passive safety crash
protection systems
7
Cape Town
(South Africa)
TC 45/SC 3
Rubber and rubber
products/Raw materials (including latex)
for use in the rubber
industry
26-28 Frankfurt
(Germany)
TC 184/SC 1
Automation systems
and integration/Physical device control
28
TC 158
Analysis of gases
London (United
Kingdom)
December 2014
1-4
Copenhagen
(Denmark)
TC 98
Bases for design of
structures
1-5
Dublin (Ireland)
TC 260
Human resource
management
3-5
Tokyo (Japan)
TC 232
Learning services
outside formal
education
3-5
Paris (France)
TC 269
Railway applications
4-5
Fukuoka (Japan)
TC 197
Hydrogen
technologies
5
Berlin (Germany)
TC 44/SC 6
Welding and allied
processes/Resistance
welding and allied
mechanical joining
8-10
London (United
Kingdom)
TC 147/SC 3
Water quality/Radioactivity
measurements
9-12
Madrid (Spain)
PC 273
Customer contact
centres
17
Frankfurt
(Germany)
TC 291
Domestic gas cooking appliances
1-4
Copenhagen
(Denmark)
TC 98/SC 2
Bases for design of
structures/Reliability
of structures
1-4
Copenhagen
(Denmark)
TC 98/SC 3
Bases for design of
structures/Loads,
forces and other
actions
10-11 Edinburgh (United Kingdom)
TC 171/SC 2
Document management applications/
Application issues
11-14 Ottawa (Canada)
TC 244
Industrial furnaces
and associated processing equipment
12
TC 22/SC 3
Road vehicles/Electrical and electronic
equipment
13-14 Berlin (Germany)
TC 182/SC 1
Geotechnics/Geotechnical investigation and testing
14-20 Beijing (China)
TC 130
Graphic technology
January 2015
15-20 Abu Dhabi
(United Arab
Emirates)
JTC 1
Information
technology
12-16 Weinheim
(Germany)
TC 69/SC 4
17-21 St. Augustine,
Florida (USA)
TC 108/SC 2
Mechanical vibration,
shock and condition
monitoring/Measurement and evaluation of mechanical
vibration and shock
as applied to machines, vehicles and
structures
Applications of statistical methods/Applications of statistical
methods in process
management
19-20 Toledo (Spain)
JTC 1/SC 37
Information
technology/
Biometrics
JTC 1/SC 35
Information technology/User interfaces
22-23 Cape Town
(South Africa)
TC 44/SC 8
Welding and allied
processes/Equipment for gas welding,
cutting and allied
processes
25-29 Foshan (China)
TC 107
Metallic and other
inorganic coatings
LEMONT (USA)
18-20 Madrid (Spain)
TC 34/SC 7
Food products/Spices, culinary herbs and
condiments
19
Geneva
(Switzerland)
CSC/FIN
Council/Council
Standing Committee
on Finance (CSC/FIN)
19
Trondheim
(Norway)
TC 234
Fisheries and
aquaculture
TC 23/SC 13
Tractors and machinery for agriculture
and forestry/Powered
lawn and garden
equipment
19-21 Delft
(Netherlands)
24-25 Geneva
(Switzerland)
CSC/SPC
24-28 Paris (France)
PC 287
Chain of custody of
wood and woodbased products
25-26 Shenzen (China)
TC 211
Geographic information/
Geomatics
18
Council/Strategy and
Policy Committee
(CSC/SPC)
19-23 Copenhagen
(Denmark)
*
25-29 Foshan (China)
*
TC 107/SC 3
Metallic and other
inorganic coatings/
Electrodeposited
coatings and related
finishes
25-29 Foshan (China)
*
TC 107/SC 8
Metallic and other
inorganic coatings/
Chemical conversion
coatings
26-27 Paris (France)
TC 166
Ceramic ware, glassware and glass ceramic ware in contact
with food
28
TC 207/SC 3
Environmental management/Environmental labelling
Berlin (Germany)
February 2015
ISO Update, Supplement to ISO Focus -- November 2014
2-5
Beijing (China)
3-13
London (United
Kingdom)
9-13
*
Fairfax (USA)
11
Geneva
(Switzerland)
11
St. Petersburg,
Florida (USA)
TC 257
Evaluation of energy
savings
10
TC 213
Dimensional and
geometrical product
specifications and
verification
13-14 Lyon (France)
TC 58/SC 4
*
Gas cylinders/Operational requirements
for gas cylinders
CSC/SPC
Council/Strategy and
Policy Committee
(CSC/SPC)
TC 115
Pumps
12-13 Geneva
(Switzerland)
President's
committee
President's
committee
22-23 Miami (USA)
TMB
Technical Management Board
March 2015
London (United
Kingdom)
*
TC 92/SC 1
Fire safety/Fire initiation and growth
TC 117
Fans
13-17 Tienjin (China)
**
TC 161
Control and protective devices for gas
and/or oil burners and
appliances
13-17 (Czech Republic)
**
TC 224
Service activities
relating to drinking
water supply systems
and wastewater
systems - Quality
criteria of the service
and performance
indicators
19-24 Vico Equense
(Italy)
*
TC 184/SC 4
Automation systems
and integration/Industrial data
20-22 Zurich
(Switzerland)
*
TC 126
Tobacco and tobacco
products
3
Virtual
(Unknown)
CSC/FIN
Council/Council
Standing Committee
on Finance (CSC/FIN)
20-22 Zurich
(Switzerland)
*
TC 126/SC 1
Tobacco and tobacco
products/Physical
and dimensional tests
9-13
London (United
Kingdom)
TC 110/SC 4
Industrial trucks/
Rough-terrain trucks
20-22 Zurich
(Switzerland)
*
TC 126/SC 2
12
West Conshohocken (Philadelphia) (USA)
TC 221
Geosynthetics
Tobacco and tobacco products/Leaf
tobacco
20-24 San Francisco
(USA)
*
TC 215
Health informatics
21
**
TC 274
Light and lighting
21-22 DГјsseldorf
(Germany)
*
TC 44/SC 10
Welding and allied
processes/Unification
of requirements in the
field of metal welding
21-22 (Kazakhstan)
**
TC 67/SC 2
Materials, equipment
and offshore structures for petroleum,
petrochemical and
natural gas industries/
Pipeline transportation systems
22-24 General Roca
(Argentina)
*
TC 34/SC 12
Food products/Sensory analysis
23
DГјsseldorf
(Germany)
*
TC 44/SC 11
Welding and allied
processes/Qualification requirements for
welding and allied
processes personnel
24
Atlanta (USA)
**
TC 6/SC 2
Paper, board and
pulps/Test methods
and quality specifications for paper and
board
25
Atlanta (USA)
**
TC 6
Paper, board and
pulps
15
Caparica
(Portugal)
16
Geneva
(Switzerland)
*
16-18 Geneva
(Switzerland)
TC 48
Laboratory equipment
President's
committee
President's
committee
COUNCIL
Council
23-27 Vienna (Austria)
*
JTC 1/SC 38
Information technology/Distributed
application platforms
and services (DAPS)
23-27 Paris (France)
*
PC 278
Anti-bribery management systems
**
PC 287
Chain of custody of
wood and woodbased products
Rio de Janeiro
(Brazil)
March-June 2015
25-26 Nara (Japan)
*
TC 184
Automation systems
and integration
March-April 2015
31-2
Montreal
(Canada)
*
TC 20/SC 9
Aircraft and space
vehicles/Air cargo and
ground equipment
**
PC 284
Management system
for private security
operations - Requirements with guidance
1st Quarter 2015
(United
Kingdom)
Paris (France)
*
TC 24/SC 4
Particle characterization including sieving/Particle
characterization
Foshan (China)
**
TC 107/SC 4
Metallic and other
inorganic coatings/
Hot dip coatings
(galvanized, etc.)
Foshan (China)
**
TC 107/SC 7
Metallic and other
inorganic coatings/
Corrosion tests
April 2015
ISO Update, Supplement to ISO Focus -- November 2014
Beijing (China)
(France)
**
TC 29
Small tools
(France)
**
TC 29/SC 9
Small tools/Tools
with defined cutting
edges, cutting items
(USA)
**
TC 34/SC 15
Food products/Coffee
May 2015
1-7
(United
Kingdom)
**
TC 67/SC 4
Materials, equipment
and offshore structures for petroleum,
petrochemical and
natural gas industries/
Drilling and production equipment
4-7
Toronto (Canada)
*
TC 68
Financial services
19
4-8
Kuching
(Malaysia)
**
JTC 1/SC 27
Information technology/IT Security
techniques
Tokyo (Japan)
**
TC 113/SC 2
Hydrometry/Flow
measurement
structures
4-8
(Unknown)
**
TC 36
Cinematography
Tokyo (Japan)
**
TC 113/SC 5
8-15
Tokyo (Japan)
**
TC 10
Technical product
documentation
11-12 Kuching
(Malaysia)
*
JTC 1/SC 27
Information technology/IT Security
techniques
Hydrometry/Instruments, equipment and data
management
Tokyo (Japan)
**
TC 113/SC 6
Hydrometry/Sediment
transport
11-15 Ohio (USA)
**
TC 184/SC 5
Automation systems
and integration/Interoperability, integration, and architectures for enterprise
systems and automation applications
Tokyo (Japan)
**
TC 113/SC 8
Hydrometry/Ground
water
London (United
Kingdom)
**
TC 131/SC 6
Fluid power systems/
Contamination control
June 2015
1-5
Sapporo (Japan)
**
TC 42
Photography
11-16 Bologna (Italy)
**
TC 130
Graphic technology
1-5
Seattle (USA)
*
TC 43/SC 3
12-15 London (United
Kingdom)
**
TC 156
Corrosion of metals
and alloys
Acoustics/Underwater acoustics
1-6
**
TC 147
Water quality
13
Philadelphia
(USA)
3-5
(Japan)
**
TC 145
Graphical symbols
8-12
Berlin (Germany)
**
TC 121
Anaesthetic and respiratory equipment
9-12
Pretoria (South
Africa)
**
REMCO
Committee on reference materials
10-11 (France)
**
TC 17/SC 9
Steel/Tinplate and
blackplate
15-19 Vancouver
(Canada)
**
TC 22/SC 13
Road vehicles/Ergonomics applicable to
road vehicles
17-18 Geneva
(Switzerland)
*
TMB
Technical Management Board
18-19 Frankfurt
(Germany)
*
TC 184/SC 2
Automation systems
and integration/
Robots and robotic
devices
21-26 Matsue (Japan)
**
TC 37
Terminology and
other language and
content resources
22-25 Avignon (France)
*
TC 54
Essential oils
22-26 (Netherlands)
**
TC 34/SC 9
Food products/
Microbiology
22-26 (China)
**
TC 69
Applications of statistical methods
22-26 Göteborg
(Sweden)
*
TC 188
Small craft
30
Virtual
(Unknown)
*
President's
committee
President's
committee
Matsue (Japan)
**
JTC 1/SC 28
Information technology/Office equipment
(Australia)
**
JTC 1/SC 36
Information technology/Information
technology for learning, education and
training
Zurich
(Switzerland)
**
TC 17/SC 17
Steel/Steel wire rod
and wire products
(Europe)
**
TC 34/SC 18
Food products/Cocoa
Beijing (China)
**
TC 46
Information and
documentation
Mexico City
(Mexico)
**
TC 242
Energy Management
(Unknown)
**
TC 268/SC 1
Sustainable development in communities/
Smart community
infrastructures
**
TC 87
Cork
18-22 (Brazil)
Paris (France)
**
JTC 1/SC 40
Information technology/IT Service
Management and IT
Governance
18-22 London (United
Kingdom)
**
TC 4
Rolling bearings
18-22 Chengdu (China)
**
TC 39/SC 2
Machine tools/Test
conditions for metal
cutting machine tools
18-22 Luzern
(Switzerland)
*
TC 114
Horology
22
*
TC 228
Tourism and related
services
**
TC 23/SC 18
Tractors and machinery for agriculture and
forestry/Irrigation and
drainage equipment
and systems
Cape Town
(South Africa)
25-29 Madrid (Spain)
26-29 (Argentina)
27
London (United
Kingdom)
**
**
Glasgow,
Scotland (United
Kingdom)
**
TC 85/SC 5
TC 67/SC 5
JTC 1/SC 32
Nuclear energy,
nuclear technologies, and radiological
protection/Nuclear
fuel cycle
Materials, equipment
and offshore structures for petroleum,
petrochemical and
natural gas industries/
Casing, tubing and
drill pipe
Information technology/Data management
and interchange
(USA)
**
PC 272
Forensic sciences
8-15
Tokyo (Japan)
**
TC 10/SC 1
Technical product
documentation/Basic
conventions
8-15
Tokyo (Japan)
**
TC 10/SC 6
Technical product
documentation/Mechanical engineering
documentation
8-15
Tokyo (Japan)
**
TC 10/SC 10
Technical product
documentation/
Process plant
documentation
Tokyo (Japan)
**
TC 113
Hydrometry
Tokyo (Japan)
**
TC 113/SC 1
Hydrometry/Velocity
area methods
June-July 2015
20
ISO Update, Supplement to ISO Focus -- November 2014
30-3
(Cyprus)
**
TC 193
Natural gas
(Europe)
**
TC 22/SC 19
Road vehicles/Wheels
30-3
(Cyprus)
**
TC 193/SC 3
Natural gas/Upstream
area
Vienna (Austria)
**
TC 33
Refractories
(Europe)
**
TC 67
Materials, equipment
and offshore structures for petroleum,
petrochemical and
natural gas industries
(Japan)
**
TC 133
Clothing sizing systems - size designation, size measurement methods and
digital fittings
Johor Bahru
(Malaysia)
**
TC 165
Timber structures
Seattle (USA)
**
TC 201/SC 6
Surface chemical analysis/Secondary ion mass
spectrometry
(Netherlands)
**
TC 258
Project, programme
and portfolio
management
2nd Quarter 2015
(Europe)
**
TC 94/SC 13
Personal safety -Protective clothing
and equipment/Protective clothing
Istanbul (Turkey)
**
TC 120
Leather
(China)
**
TC 172/SC 7
Optics and photonics/Ophthalmic optics
and instruments
1st Semester 2015
London (United
Kingdom)
**
TC 8/SC 8
Ships and marine
technology/Ship
design
(USA)
**
TC 31/SC 9
Tyres, rims and
valves/Valves for tube
and tubeless tyres
July 2015
1-7
Berlin (Germany)
*
TC 91
Surface active agents
(USA)
**
TC 86/SC 6
Refrigeration and
air-conditioning/
Testing and rating of
air-conditioners and
heat pumps
August 2015
26-28 Jeju (Korea,
Republic of)
*
TC 206
Fine ceramics
August-September 2015
31-4
Hokaido (Japan)
*
JTC 1/SC 35
Information technology/User interfaces
September 2015
October 2015
1
Rome (Italy)
*
TC 39/SC 4
Machine tools/Woodworking machines
5-9
Dublin (Ireland)
*
JTC 1/SC 38
Information technology/Distributed
application platforms
and services (DAPS)
8
Virtual
(Unknown)
*
President's
committee
President's
committee
12-16 Paris (France)
*
TC 34/SC 17
Food products/Management systems for
food safety
15-17 Seattle (USA)
*
TC 201
Surface chemical
analysis
1-6
(Canada)
**
TC 163
Thermal performance
and energy use in the
built environment
19-23 (Germany)
**
TC 39/SC 2
Machine tools/Test
conditions for metal
cutting machine tools
7-14
Sydney
(Australia)
**
TC 96
Cranes
19-23 Gaithersburg
(USA)
**
TC 92
Fire safety
13
Seoul (Korea,
Republic of)
*
President's
committee
President's
committee
19-23 Gaithersburg
(USA)
*
TC 92/SC 1
Fire safety/Fire initiation and growth
13-17 Lahaina, Hawaii
(USA)
**
TC 127
Earth-moving
machinery
22-23 Berlin (Germany)
*
TC 209
14
*
COUNCIL
Council
Cleanrooms and associated controlled
environments
26-30 New Delhi (India)
*
JTC 1/SC 27
14-18 (Canada)
**
TC 205
Building environment
design
Information technology/IT Security
techniques
14-25 Berlin (Germany)
*
TC 213
Dimensional and
geometrical product
specifications and
verification
27-29 Berlin (Germany)
*
TC 256
Pigments, dyestuffs
and extenders
15
Seoul (Korea,
Republic of)
Seoul (Korea,
Republic of)
*
DEVCO
Committee on developing country matters
15-16 Seoul (Korea,
Republic of)
*
TMB
Technical Management Board
16-18 Seoul (Korea,
Republic of)
*
GA
General Assembly
17
*
CSC/FIN
Council/Council
Standing Committee
on Finance (CSC/FIN)
17-18 Moscow (Russian Federation)
**
TC 197
Hydrogen
technologies
28-29 Basel
(Switzerland)
**
Seoul (Korea,
Republic of)
TC 44/SC 8
ISO Update, Supplement to ISO Focus -- November 2014
Welding and allied
processes/Equipment for gas welding,
cutting and allied
processes
28-30 Tsukuba (Japan)
**
TC 202
Microbeam analysis
Madrid (Spain)
**
TC 10/SC 8
Technical product documentation/Construction
documentation
(Netherlands)
**
TC 34/SC 2
Food products/Oleaginous seeds and
fruits and oilseed
meals
(Netherlands)
**
TC 34/SC 11
Food products/
Animal and vegetable
fats and oils
Nairobi (Kenya)
**
TC 38
Textiles
Nairobi (Kenya)
**
TC 38/SC 1
Textiles/Tests for
coloured textiles and
colorants
21
Nairobi (Kenya)
**
TC 38/SC 2
Textiles/Cleansing,
finishing and water
resistance tests
Nairobi (Kenya)
**
TC 38/SC 23
Textiles/Fibres and
yarns
Nairobi (Kenya)
**
TC 38/SC 24
Textiles/Conditioning atmospheres and
physical tests for
textile fabrics
Sao Paulo
(Brazil)
**
TC 58/SC 2
Gas cylinders/Cylinder fittings
Madrid (Spain)
**
TC 59/SC 16
Buildings and civil
engineering works/
Accessibility and
usability of the built
environment
Sao Paulo
(Brazil)
**
Santiago (Chile)
**
TC 135/SC 9
TC 195
Non-destructive testing/Acoustic emission
testing
Building construction machinery and
equipment
November 2015
9-12
(Spain)
**
TC 189
Ceramic tile
9-13
Kobe (Japan)
*
TC 21
Equipment for fire
protection and fire
fighting
11-13 (Malaysia)
**
TC 123
Plain bearings
12-13 Kuala Lumpur
(Malaysia)
**
TC 227
Springs
(China)
**
JTC 1
Information
technology
**
TC 164
Mechanical testing of
metals
(Austria)
**
TC 190
Soil quality
Vienna (Austria)
**
TC 190/SC 2
Soil quality/Sampling
**
TC 120
Leather
**
TC 213
Dimensional and
geometrical product
specifications and
verification
*
COUNCIL
Council
**
TC 161
Control and protective devices for gas
and/or oil burners and
appliances
(Brazil)
**
TC 67/SC 4
Materials, equipment
and offshore structures for petroleum,
petrochemical and
natural gas industries/
Drilling and production equipment
(India)
**
TC 85
Nuclear energy,
nuclear technologies, and radiological
protection
**
JTC 1/SC 36
Information technology/Information
technology for learning, education and
training
**
TC 34/SC 16
Food products/Horizontal methods for
molecular biomarker
analysis
*
COUNCIL
Council
January 2016
(China)
February 2016
(USA)
March 2016
17-18 Geneva
(Switzerland)
April 2016
Seoul (Korea,
Republic of)
May 2016
June 2016
4th Quarter 2015
Dayton, Ohio
(USA)
**
TC 159/SC 3
Ergonomics/Anthropometry and
biomechanics
(China)
**
TC 282
Water re-use
(France)
**
TC 172/SC 1
Optics and photonics/Fundamental
standards
(USA)
**
TC 184/SC 4
Automation systems
and integration/Industrial data
2nd Semester 2015
(Germany)
1st Semester 2016
Month unknown 2015
22
(United
Kingdom)
Brussels
(Belgium)
**
TC 23
Tractors and machinery for agriculture and
forestry
(Brazil)
**
TC 23/SC 17
Tractors and machinery for agriculture
and forestry/Manually portable forest
machinery
(USA)
**
TC 27
Solid mineral fuels
(Finland)
**
TC 44
Welding and allied
processes
(France)
**
TC 45
Rubber and rubber
products
Berlin (Germany)
**
TC 138
Plastics pipes, fittings
and valves for the
transport of fluids
(Japan)
**
TC 142
Cleaning equipment
for air and other
gases
(China)
**
TC 155
Nickel and nickel
alloys
(China)
September 2016
19
Beijing (China)
21-23 Beijing (China)
*
GA
General Assembly
Paris (France)
**
TC 17
Steel
Sao Paulo
(Brazil)
**
TC 209
Cleanrooms and associated controlled
environments
Shanghai (China)
**
TC 213
Dimensional and
geometrical product
specifications and
verification
**
TC 201
Surface chemical
analysis
**
JTC 1
Information
technology
**
JTC 1/SC 23
Information technology/Digitally Recorded
Media for Information Interchange and
Storage
October 2016
(Korea, Republic of)
November 2016
(Norway)
Month unknown 2016
(Korea, Republic of)
ISO Update, Supplement to ISO Focus -- November 2014
(Russian
Federation)
**
REMCO
Committee on reference materials
(Denmark)
**
TC 37
Terminology and
other language and
content resources
(Australia)
**
TC 44
Welding and allied
processes
(Malaysia)
**
TC 45
Rubber and rubber
products
Wellington (New
Zealand)
**
TC 46
Information and
documentation
(Sweden)
**
TC 102
Iron ore and direct
reduced iron
(China)
**
TC 138/SC 2
Plastics pipes, fittings
and valves for the
transport of fluids/
Plastics pipes and
fittings for water
supplies
**
JTC 1/SC 36
Information technology/Information
technology for learning, education and
training
**
JTC 1/SC 36
Information technology/Information
technology for learning, education and
training
June 2017
(Australia)
June 2018
(Korea, Dem. P.
Rep. of)
ISO Update, Supplement to ISO Focus -- November 2014
23

ISO/TS 22003:2013 – changes to the new version

How to Install and Use SSS\Progman with Carsoft or INPA interface

jomo kenyatta university of agriculture and technology mombasa

Download free - OGP

224 kB - ISO

231 kB

#09 - A how-to guide for Trial Summary 3.1.3x - PhUSE Wiki

How to Write Technical Reports: Understandable Structure - Yimg

Net Developers - C# .Net TDD/SOA/Microservices Location

How to install GT1\EasyDIS v44 step-by-step - scchosting.com

How to help your son / daughter revise in History - Gordano School

THE KENYA GAZETTE - Kenya Law Reports

TA 5: Guide: How to Share and Exchange Geospatial Data