ISO Update
Supplement to ISOFocus
October 2014
International Standards in process
ISO/CD 22917
An International Standard is the result of an agreement between
the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus
has been reached within the technical committee, the document is
sent to the Central Secretariat for processing as a draft International
Standard (DIS). The DIS requires approval by at least 75 % of the
member bodies casting a vote. A confirmation vote is subsequently
carried out on a final draft International Standard (FDIS), the approval
criteria remaining the same.
CD registered
Superabrasives — Limit deviations and run-out
tolerances for grinding wheels with diamond or
cubic boron nitride
TC 34
Food products
ISO
27608:2010/
CD Amd 1
Animal and vegetable fats and oils — Determination of Lovibond® colour — Automatic
method — Amendment 1
ISO
5495:2005/CD
Amd 1
Sensory analysis — Methodology — Paired
comparison test — Amendment 1
ISO/CD TS
16393
Molecular biomarker analysis — Qualitative
methods — Validation scheme for binary analytical methods for food and food products
TC 43
Acoustics
ISO 3897:2005/CD
Amd 1
Acoustics — Reference zero for the calibration
of audiometric equipment — Part 7: Reference threshold of hearing under free-field and
diffuse-field listening conditions — Amendment
1
TC 45
Rubber and rubber products
ISO/CD 247
Rubber — Determination of ash
Period from 01 September to 30 September 2014
TC 58
Gas cylinders
These documents are currently under consideration in the technical
committee.
ISO/CD 24431
Gas cylinders — Cylinders for compressed and
liquefied gases (excluding acetylene) — Inspection at time of filling
TC 67
Materials, equipment and offshore
structures for petroleum, petrochemical and natural gas industries
ISO/CD 19903
Petroleum and natural gas industries — Fixed
concrete offshore structures
They have been registred at the Central Secretariat.
TC 8
Ships and marine technology
ISO/CD 18139
Ships and marine technology — Globe valves
for use in low temperature applications — Design and testing requirements
ISO/CD 18154
Ships and marine technology — Pilot operated
safety valves for low temperature applications
— Design requirements
TC 72
Textile machinery and accessories
ISO/CD 96-1
Textile machinery and accessories — Rings
and travellers for ring spinning and ring twisting
frames — Part 1: Flange rings T and SF and
their travellers
TC 20
Aircraft and space vehicles
ISO/CD 17851
Space environment (natural and artificial) —
Space environment simulation at material tests
— General principles and criteria
TC 107
Metallic and other inorganic coatings
ISO/CD 14916
ISO/DTR
18146
Space systems — Design and operation
manual for spacecraft operated in the debris
environment
Thermal spraying — Determination of tensile
adhesive strength
ISO/CD 14917
Thermal spraying — Terminology, classification
TC 22
Road vehicles
ISO/CD
17536-4
Road Vehicles — Aerosol separator performance test for internal combustion engines —
Part 4: Laboratory fractional test method
ISO/CD
17536-5
Road Vehicles — Aerosol separator performance test for internal combustion engines —
Part 5: Engine fractional efficiency test method
ISO/CD 8820-4
Road vehicles — Fuse-links — Part 4: Fuselinks with female contacts (type A) and bolt-in
contacts (type B) and their test fixtures
ISO/CD
16845-1
Road vehicles — Controller area network (CAN)
conformance test plan — Part 1: Data link layer
and physical signaling
TC 126
Tobacco and tobacco products
ISO/DTR
19478-2
ISO and Health Canada intense smoking
parameters — Part 2: Examination of factors
contributing to variability in the routine measurement of TPM, water and NFDPM smoke
yields of cigarettes
TC 146
Air quality
ISO/CD
28902-2
Air quality — Environmental meteorology —
Part 2: Ground-based remote sensing by Doppler wind lidar
TC 155
Nickel and nickel alloys
ISO/CD 8049
Ferronickel shot — Sampling for analysis
TC 159
Ergonomics
ISO/CD
9241-960
Ergonomics of human-system interaction —
Part 960: Framework and guidance for gesture
interactions
TC 23
Tractors and machinery for agriculture
and forestry
ISO
11450:1999/
CD Amd 1
Equipment for harvesting and conservation —
Round balers — Terminology and commercial
specifications — Amendment 1
TC 163
TC 29
Small tools
Thermal performance and energy use
in the built environment
ISO/CD 17772
ISO
21538:2004/
CD Amd 1
Blanks for superabrasive cutting-off wheels
— Mounting and fixing bores — Building construction and civil engineering — Amendment 1
Energy performance of buildings - Indoor environmental input parameters
TC 171
Document management applications
ISO Update, Supplement to ISO Focus -- October 2014
1
ISO/DTR
18159
Document management — Environmental and
work place safety regulations affecting microfilm processors
TC 172
Optics and photonics
ISO/CD 9022-9
Optics and optical instruments — Environmental test methods — Part 9: Solar radiation
TC 184
Automation systems and integration
IEC/CD
62264-3
Enterprise-control system integration — Part
3: Activity models of manufacturing operations
management
IEC/CD
62264-5
Enterprise-control system integration — Part 5:
These documents have obtained substantial support within the appropriate ISO technical committee.
TC 190
Soil quality
They have been submitted to the ISO member bodies for voting by
the date shown.
ISO/CD 18504
Soil quality — Guidance on sustainable
remediation
TC 192
Gas turbines
ISO/CD 18888
Combined Cycle Power Plants
TC 197
Hydrogen technologies
ISO/CD 19884
Gaseous hydrogen - Cylinders and tubes for
stationary storage
TC 201
Surface chemical analysis
ISO/CD TR
13096
Surface chemical analysis — Scanning-probe
microscopy — Guidelines for the description of
AFM probe properties
TC 211
Geographic information/Geomatics
ISO/DTS
19157-2
Geographic information — Data quality — Part
2: XML Schema Implementation
TC 238
Solid biofuels
ISO/CD
17225-8
Solid biofuels — Fuel specifications and
classes — Part 8: Thermally treated and densified biomass fuels
DIS circulated
Period from 01 September to 30 September 2014
* Available in English only
Vote
terminates
TC 5
ISO/DIS 16631
Ferrous metal pipes and
metallic fittings
*
TC 6
ISO/DIS 11475
Ductile iron pipes, fittings, accessories and
their joints compatible with plastic (PVC and PE) piping systems
for water applications
Paper, board and pulps
*
Paper and board — Determination of CIE whiteness, D65/10
degrees (outdoor daylight)
2014-12-24
(Revision of ISO 11475:2004)
TC 8
Ships and marine
technology
JTC 1
Information technology
ISO/IEC
19788-3:2011/
PDAM 1
Information technology — Learning, education
and training — Metadata for learning resources
— Part 3: Basic application profile — Amendment 1
ISO/DIS 17905
ISO/IEC CD
19788-7
Information technology — Learning, education
and training — Metadata for learning resources
— Part 7: Bindings
TC 17
ISO/IEC CD
19788-10
Information technology — Learning, education
and training — Metadata for learning resources
— Part 10: Application Profile for Access,
Distribution and Intellectual Property (WIPO
compliant) elements
ISO/IEC CD
19788-11
Information technology — Learning, education
and training — Metadata for learning resources
— Part 11: Migration from LOM to MLR
ISO/IEC CD
20016-2
Information technology for learning, education
and training — Human interface equivalencies
— Part 2: Template for Specifying Levels of
Semantic Unambiguity
ISO/DIS 18423
*
ISO/IEC CD
24751-2
Information technology — Individualized adaptability and accessibility in e-learning, education and training — Access for all — Part 2:
Registry
Space data and information
transfer systems — PseudoNoise (PN) Ranging Systems
(Revision of ISO 18423:2013)
ISO/DIS 20104
*
ISO/IEC CD
24751-3
Information technology — Individualized adaptability and accessibility in e-learning, education and training — Access for all — Part 3:
Application profile
Space data and information
transfer systems — ProducerArchive Interface Specification
(PAIS)
ISO/DIS 21459
*
ISO/IEC CD
36002
Information technology — Quality for learning,
education and training
ISO/IEC CD
2382-37
Information technology — Vocabulary — Part
37: Biometrics
Space data and information
transfer systems — Proximity-1
space link protocol — Coding
and synchronization sublayer
(Revision of ISO 21459:2006)
ISO/IEC PDTR
30110
Biometrics and children
ISO/DIS 21460
*
Space data and information
transfer systems — Proximity-1
space link protocol — Physical
layer
2
2014-12-04
*
Ships and marine technology
- Installation, inspection and
maintenance of container securing devices for ships
Steel
ISO/DIS 17745
*
Steel wire ring mesh panels —
Definitions and specifications
ISO/DIS 17746
*
Steel wire rope net panels
and rolls — Definitions and
specifications
TC 20
ISO/DIS
4118.2
2014-12-18
Aircraft and space vehicles
*
Air cargo — Non-certified lower
deck containers — Design and
testing
2014-11-19
(Revision of ISO 4118:2005)
ISO Update, Supplement to ISO Focus -- October 2014
(Revision of ISO 21460:2007)
ISO/DIS 22663
*
TC 21
ISO/DIS
7240-29
ISO/DIS
11997-1
Space data and information
transfer systems — Proximity-1
space link protocol — Data link
layer
(Revision of ISO 22663:2007)
ISO/DIS
8503-5
Equipment for fire protection and fire fighting
*
*
*
Fire detection and alarm systems
— Part 29: Video fire detectors
2014-12-26
TC 22
ISO/DIS
22900-2
Road vehicles
*
IEC/DIS
62752.2
ISO/DIS 18246
In-Cable Control and Protection
Device for mode 2 charging of
electric road vehicles (IC-CPD)
*
TC 23
ISO/DIS 7216
*
ISO/DIS 19344
2014-12-12
2014-12-06
*
ISO/DIS
17881-1
ISO/DIS
17881-2
ISO/DIS 18782
ISO/DIS
105-G04
Agricultural and forestry tractors
— Measurement of noise emitted when in motion
(Revision of ISO 7216:1992)
*
*
*
TC 39
ISO/DIS
16092-1
Pneumatic Tubes for Automotive
Vehicles — Technical Requirements and Test Methods
*
ISO
5492:2008/
DAmd 1
*
ISO
11056:1999/
DAmd 2
*
ISO/DIS 13299
*
Durum wheat semolina and
alimentary pasta — Assessment
of cooking quality of alimentary
pasta by sensory analysis —
Part 1: Reference method
(Revision of ISO 7304:1985)
*
TC 45
Fermented milk products —
Quantification of lactic acid bacteria — Flow cytometry method
ISO/DIS 34-1
*
*
2014-12-17
ISO/DIS 6133
Sensory analysis — Vocabulary
— Amendment 1
*
2015-02-19
Sensory analysis — Methodology — Magnitude estimation
method — Amendment 2
2014-12-30
Sensory analysis — Methodology — General guidance for
establishing a sensory profile
2015-02-12
ISO/DIS 18852
*
TC 59
ISO/DIS 1514
Paints and varnishes
*
ISO/DIS 11528
*
Paints and varnishes — Standard panels for testing
2015-02-26
(Revision of ISO 1514:2004)
ISO/DIS
15686-5
2015-02-05
Textiles — Determination of certain flame retardants — Part 2:
Phosphorus flame retardants
2015-02-05
Textiles — Determination of
dynamic hygroscopic heat
generation
2014-12-25
Textiles — Tests for colour
fastness — Part G04: Colour
fastness to Nitric Oxide in the
atmosphere at high humidities
(Revision of ISO 105-G04:1989)
2014-12-25
Machine tools safety — Presses — Part 1: General safety
requirements
2015-02-12
Rubber, vulcanized or thermoplastic — Determination of tear
strength — Part 1: Trouser, angle
and crescent test pieces
(Revision of ISO 34-1:2010)
2014-12-11
Rubber, vulcanized or thermoplastic — Determination of tear
strength — Part 2: Small (Delft)
test pieces
(Revision of ISO 34-2:2011)
2014-12-11
Rubber and plastics — Analysis
of multi-peak traces obtained in
determinations of tear strength
and adhesion strength
(Revision of ISO 6133:1998)
2014-12-04
Rubber compounding ingredients — Determination of
multipoint nitrogen surface area
(NSA) and statistical thickness
surface area (STSA)
(Revision of ISO 18852:2012)
2014-12-04
Buildings and civil engineering works
(Revision of ISO 13299:2003)
TC 35
Textiles — Determination of certain flame retardants — Part 1:
Brominated flame retardants
Rubber and rubber
products
2014-12-17
ISO/DIS 34-2
2015-02-19
Machine tools
Food products
*
Preparation of steel substrates
before application of paints and
related products — Surface
roughness characteristics of
blast-cleaned steel substrates —
Part 5: Replica tape method for
the determination of the surface
profile
(Revision of ISO 8503-5:2003)
2015-02-26
Textiles
*
2014-12-25
Tyres, rims and valves
TC 34
ISO/DIS
7304-1
Electrically propelled mopeds
and motorcycles — Safety requirements for conductive connection to an external electric
power supply
TC 38
Tractors and machinery for
agriculture and forestry
TC 31
ISO/DIS 17464
Road vehicles — Modular
vehicle communication interface
(MVCI) — Part 2: Diagnostic protocol data unit (D-PDU API)
(Revision of ISO 22900-2:2009)
Paints and varnishes — Determination of resistance to cyclic
corrosion conditions — Part 1:
Wet (salt fog)/dry/humidity
(Revision of ISO 11997-1:2005)
*
Buildings and civil engineering
works — Sealants - Determination of crazing and cracking
following exposure to artificial or
natural weathering
Buildings and constructed assets — Service-life planning —
Part 5: Life-cycle costing
2014-12-30
2014-12-11
(Revision of ISO 15686-5:2008)
ISO Update, Supplement to ISO Focus -- October 2014
3
TC 61
ISO/DIS
19069-2
*
TC 67
ISO/DIS 17349
ISO/DIS 17782
Plastics — Polypropylene (PP)
moulding and extrusion materials — Part 2: Preparation of test
specimens and determination of
properties
(Revision of ISO 1873-2:2007)
TC 94
*
*
Petroleum and natural gas industries — Guidelines for offshore
platforms handling streams with
high content of CO2 at high
pressures
Petroleum, petrochemical and
natural gas industries — Qualification of manufacturers of
special materials
ISO/DIS
13506-1
Transfusion equipment for medical use — Part 3: Blood-taking
sets for single use
*
Injection containers and accessories — Part 5: Freeze drying
closures for injection vials
2015-02-05
ISO/DIS
10958-2
TC 84
ISO/DIS 8537
Snowboards — Binding mounting area — Part 2: Requirements
and test methods for snowboards with inserts
(Revision of ISO 10958-2:2004)
ISO/DIS
13373-3
ISO/DIS
13381-1
TC 87
ISO/DIS 4708
2014-12-30
Cranes — Safety requirements
for loader cranes — Amendment 1
2014-12-30
Dentistry — Powered scaler
Mechanical vibration,
shock and condition
monitoring
*
*
*
ISO/DIS 19259
2014-12-26
Condition monitoring and
diagnostics of machines —
Prognostics — Part 1: General
guidelines
(Revision of ISO 13381-1:2004)
2014-12-11
Rough-terrain trucks — Safety
requirements and verification —
Part 5: Interface between roughterrrain truck and integrated
personnel work platform
Rough-terrain trucks — Nonintegrated personnel work platforms — Part 1: Design, safety
requirements and verification
2014-12-04
2014-12-04
Horology
*
TC 123
2014-12-04
Condition monitoring and diagnostics of machines — Vibration
condition monitoring — Part
3: Guidelines for vibration
diagnosis
Industrial trucks
*
TC 114
ISO/DIS
3160-2
Watch-cases and accessories
— Gold alloy coverings — Part
2: Determination of fineness,
thickness, corrosion resistance
and adhesion
(Revision of ISO 3160-2:2003)
2014-12-16
Plain bearings
*
Plain bearings — Bearings with
embedded solid lubricant
2014-12-04
Cork
*
TC 127
Composition cork — Gasket
material — Test methods
(Revision of ISO 4708:2000)
TC 92
4
ISO/DIS
10896-5
ISO/DIS
18479-1
2014-11-26
ISO/DIS
16733-1
*
TC 110
Sterile single-use syringes, with
or without needle, for insulin
Measurement of radioactivity in
the environment — Air: radon-222 — Part 11: Test method
for soil gas with sampling at
depth
2014-12-26
Dentistry
2015-02-05
Nuclear energy, nuclear
technologies, and radiological protection
*
TC 106
2015-02-26
(Revision of ISO 8537:2007)
ISO/DIS
11665-11
*
TC 108
2015-02-12
TC 85
ISO
15442:2012/
DAmd 1
Cranes — Limiting and indicating
devices — Part 2: Mobile cranes
— Amendment 1
(Revision of ISO 15606:1999,
ISO 22374:2005)
Devices for administration
of medicinal products and
catheters
*
*
2015-02-19
Sports and other recreational facilities and
equipment
*
2014-12-05
Cranes
ISO 102452:2014/DAmd
1
ISO/DIS 18397
(Revision of ISO 8362-5:2008)
TC 83
Protective clothing against heat
and flame — Part 1: Test method
for complete garments — Measurement of transferred energy
using an instrumented manikin
2015-02-19
(Revision of ISO 1135-3:1986)
ISO/DIS
8362-5
*
TC 96
Transfusion, infusion
and injection, and blood
processing equipment for
medical and pharmaceutical use
*
Personal safety -- Protective clothing and
equipment
2015-02-12
Materials, equipment and
offshore structures for petroleum, petrochemical and
natural gas industries
TC 76
ISO/DIS
1135-3
(Revision of ISO/TS 16733:2006)
Plastics
TC 131
Fire safety
*
Fire safety engineering — Selection of design fire scenarios and
design fires — Part 1: Selection
of design fire scenarios
ISO
10261:2002/
DAmd 1
Earth-moving machinery
*
Earth-moving machinery —
Product identification numbering
system — Amendment 1
Fluid power systems
2014-12-30
ISO Update, Supplement to ISO Focus -- October 2014
ISO/DIS
15171-2
ISO/DIS 18869
*
*
TC 133
ISO/DIS
18825-1
Hydraulic fluid power — Test
methods for couplings actuated
with or without tools
ISO/DIS 18763
*
Clothing — Digital fittings — Part
1: Vocabulary and terminology
used for the virtual human body
TC 204
2014-12-23
Plastics piping systems —
Mechanical fittings for pressure
piping systems — Specifications
2014-12-18
ISO/DIS
16890-2
2014-11-16
Cleaning equipment for air
and other gases
*
TC 147
ISO/DIS 13167
*
*
Cathodic protection — Competence levels of cathodic
protection persons — Basis for
certification scheme
Safety and control devices for
gas
burners and gas-burning appliances -Particular requirements — Part
9: Mechanical gas thermostats
TC 184
Automation systems and
integration
IEC/DIS
62264-4
Enterprise-control System
Integration — Part 4: Objects
and attributes for manufacturing operations management
integration
TC 190
ISO/DIS 22155
*
*
2014-12-09
2015-02-26
ISO/DIS
18250-3
ISO/DIS
80369-3.2
ISO/DIS
80369-6
2014-12-26
*
*
*
*
*
Soil quality — Gas chromatographic determination of volatile
aromatic and halogenated hydrocarbons and selected ethers
— Static headspace method
(Revision of ISO 22155:2011)
ISO Update, Supplement to ISO Focus -- October 2014
2014-12-18
Intelligent transport systems —
ITS central data registry — Part
2: Governance of the Central ITS
Data Concept Registry
(Revision of ISO 14817:2002)
2014-12-18
Intelligent transport systems —
Indoor navigation for personal
and vehicle ITS station — Part
1: General information and use
cases definition
Cleanrooms and associated
controlled environments — Part
1: Classification of air cleanliness
by particle concentration
(Revision of ISO 14644-1:1999)
Cleanrooms and associated controlled environments — Part 2:
Monitoring to provide evidence
of cleanroom performance
related to air cleanliness by particle concentration
(Revision of ISO 14644-2:2000)
2014-11-19
2014-11-19
Connectors for reservoir delivery
systems for healthcare applications — Part 3: Enteral
applications
Small-bore connectors for liquids
and gases in healthcare applications — Part 3: Connectors for
enteral applications
Small bore connectors for liquids
and gases in healthcare applications — Part 6: Connectors for
neuraxial applications
(Revision of ISO 594-1:1986, ISO
594-2:1998)
2014-12-26
2014-11-26
2015-02-05
Geographic information/
Geomatics
*
Addressing — Part 1: Conceptual model
2014-12-03
TC 215
2014-12-13
ISO/DIS
17090-2.2
Health informatics
*
Soil quality
*
Intelligent transport systems —
ITS central data registry — Part
1: Requirements for an ITS
central data registry
(Revision of ISO 14817:2002)
Quality management and
corresponding general aspects for medical devices
TC 211
ISO/DIS
19160-1
2014-12-18
Cleanrooms and associated controlled environments
TC 210
Control and protective
devices for gas and/or oil
burners and appliances
*
*
2015-02-26
Corrosion of metals and
alloys
TC 161
ISO/DIS
23551-9
Water quality — Plutonium,
americium, curium and neptunium — Test method using alpha
spectrometry
ISO/DIS
14644-1.2
ISO/DIS
14644-2.2
Water quality
TC 156
ISO/DIS 15257
Air filters for general ventilation — Part 2: Measurement of
fractional efficiency and air flow
resistance
ISO/DIS
17438-1
Soil quality — Determination of
the toxic effects of pollutants on
germination and early growth of
higher plants
Intelligent transport
systems
TC 209
(Revision of ISO 108381:2000, ISO 10838-2:2000, ISO
14236:2000, ISO 10838-3:2001)
TC 142
ISO/DIS
14817-1
ISO/DIS
14817-2
Plastics pipes, fittings and
valves for the transport of
fluids
*
*
2014-12-23
Clothing sizing systems
- size designation, size
measurement methods and
digital fittings
TC 138
ISO/DIS
17885.2
Connections for fluid power and
general use — Hydraulic couplings for diagnostic purposes —
Part 2: Coupling for connection
under pressure
(Revision of ISO 15171-2:2000)
Health informatics — Public key
infrastructure — Part 2: Certificate profile
2014-11-19
(Revision of ISO 17090-2:2008)
ISO/DIS 17523
2015-02-19
*
Health informatics — Requirements for electronic
prescriptions
2015-02-12
5
ISO/DIS 17583
ISO/DIS
21549-5
*
*
Health informatics — Terminology constraints for coded
data elements expressed in
ISO Harmonized Data Types
used in healthcare information
interchange
Health informatics — Patient
healthcard data — Part 5: Identification data
(Revision of ISO/IEC
19763-1:2007)
2014-12-19
2015-02-26
ISO/IEC DIS
21320-1
ISO/IEC DIS
19785-1
*
*
(Revision of ISO 21549-5:2008)
ISO/DIS 27799
*
Health informatics — Information
security management in health
using ISO/IEC 27002
2015-02-12
ISO/IEC DIS
30108-1.2
*
(Revision of ISO 27799:2008)
TC 228
ISO/DIS 13810
Information technology — Document Container File — Part 1:
Core
Information Technology —
Common Biometric Exchange
Formats Framework — Part 1:
Data Element Specification
(Revision of ISO/IEC 197851:2006, ISO/IEC 19785-1:2006/
Amd 1:2010)
Information technology — Biometric Identity Assurance Services — Part 1: BIAS services
2014-12-11
2014-12-25
2014-11-09
Tourism and related
services
*
Tourism services — Industrial
tourism — Service provision
2014-12-24
TMBG
ISO/IEC
DGuide 17
Technical Management
Board - groups
*
JTC 1
ISO/IEC DIS
29110-2
ISO/IEC DIS
10118-1
Guide for writing standards
taking into account the needs of
micro, small and medium-sized
enterprises
FDIS circulated
2015-01-17
These Final draft International Standards have been submitted to the
ISO member bodies for formal approval by the date shown
Information technology
*
*
Systems and software Engineering — Lifecycle Profiles for Very
Small Entities (VSEs) — Part 2:
Framework
(Revision of ISO/IEC
29110-2:2011)
Information technology — Security techniques — Hash-functions — Part 1: General
* Available in English only
2014-12-25
Vote
terminates
2014-12-11
*
ISO/IEC
15938-5:2003/
DAmd 5
*
ISO/IEC
2300013:2014/DAmd
1
*
ISO/IEC
23001-8:2013/
DAmd 1
*
ISO/IEC DIS
11179-6
*
ISO/IEC DIS
19763-1
6
*
Information technology — Security techniques — Lightweight cryptography — Part 4:
Mechanisms using asymmetric
techniques — Amendment 1
Information technology — Multimedia content description
interface — Part 5: Multimedia
description schemes — Amendment 5: Multiple text encodings,
extended classification metadata
Information technology - Multimedia application format
(MPEG-A) — Part 13: Augmented reality application format —
Amendment 1: ARAF reference
software and conformance
Information technology — MPEG
systems technologies — Part 8:
Coding-independent code points
— Amendment 1: New audio
code points
Information technology — Metadata registries (MDR) — Part 6:
Registration
(Revision of ISO/IEC
11179-6:2005)
Information technology — Metamodel framework for interoperability (MFI) — Part 1: Framework
TC 10
ISO/FDIS
16792
(Revision of ISO/IEC
10118-1:2000)
ISO/IEC
29192-4:2013/
DAmd 1
Period from 01 September to 30 September 2014
2014-12-11
2014-12-18
*
Technical product documentation — Digital product definition
data practices
2014-11-19
Technical product documentation — Lettering — Part 1:
General requirements
2014-11-12
(Revision of ISO 3098-0:1997)
TC 22
Road vehicles
*
TC 23
ISO/FDIS
13693-2
2014-12-26
*
(Revision of ISO 16792:2006)
ISO/FDIS
3098-1
ISO/FDIS
16505
2014-12-26
Technical product
documentation
2014-11-30
Tractors and machinery for
agriculture and forestry
*
TC 28
ISO/FDIS 3679
Road vehicles — Ergonomic and
performance aspects of Camera
Monitor Systems — Requirements and test procedures
Irrigation equipment — Safety
devices for chemigation — Part
2: Chemigation valve assemblies
from DN 75 to DN 350
2014-11-10
Petroleum products and
lubricants
*
Determination of flash no-flash
and flash point — Rapid equilibrium closed cup method
2014-11-26
(Revision of ISO 3679:2004, ISO
3680:2004)
TC 34
Food products
ISO Update, Supplement to ISO Focus -- October 2014
ISO/FDIS
5527.2
*
Cereals — Vocabulary
ISO/FDIS
5053-1
*
2014-11-05
(Revision of ISO 5527:1995)
TC 54
ISO/FDIS 3064
TC 58
ISO/FDIS
21172-1
ISO/FDIS
16745
ISO/FDIS
19069-1
*
*
*
*
*
ISO/FDIS
10406-2
Data structures for electronic
product catalogues for building
services — Part 1: Concepts,
architecture and model
Environmental performance of
buildings — Carbon metric of a
building — Use stage
Plastics — Polyamide (PA)
moulding and extrusion materials
— Part 1: Designation system,
marking of products and basis
for specifications
(Revision of ISO 1874-1:2010)
Plastics — Polypropylene (PP)
moulding and extrusion materials — Part 1: Designation system
and basis for specifications
(Revision of ISO 1873-1:1995)
Petroleum, petrochemical and
natural gas industries — Cathodic protection of pipeline systems
— Part 1: On-land pipelines
(Revision of ISO 15589-1:2003)
*
Financial services — Personal
Identification Number (PIN) management and security — Part
1: Basic principles and requirements for PINs in card-based
systems — Amendment 1
*
Fibre-reinforced polymer (FRP)
reinforcement of concrete —
Test methods — Part 1: FRP
bars and grids
(Revision of ISO 10406-1:2008)
Fibre-reinforced polymer (FRP)
reinforcement of concrete — Test
methods — Part 2: FRP sheets
(Revision of ISO 10406-2:2008)
TC 110
2014-11-04
Industrial trucks
ISO Update, Supplement to ISO Focus -- October 2014
Pumps
*
TC 118
ISO/FDIS
10439-2
Pump system energy
assessment
Compressors and pneumatic tools, machines and
equipment
*
2014-11-10
TC 121
ISO/FDIS
18835
2014-11-12
*
ISO/FDIS
3601-5
2014-11-04
*
TC 138
ISO/FDIS 7509
ISO/FDIS
17245
Fluid power systems — O-rings
— Part 5: Specification of elastomeric materials for industrial
applications
(Revision of ISO 3601-5:2002)
2014-11-30
Plastics pipes, fittings and
valves for the transport of
fluids
*
TC 156
ISO/FDIS
17224
2014-11-29
Fluid power systems
2014-11-13
2014-11-17
Inhalational anaesthesia systems — Draw-over anaesthetic
systems
Medical electrical equipment —
Part 1-11: General requirements
for basic safety and essential
performance — Collateral standard: Requirements for medical
electrical equipment and medical
electrical systems used in the
home healthcare environment
(Revision of IEC 60601-111:2010, IEC 60601-1-11:2010/
Cor 1:2011)
TC 131
2014-11-17
2014-11-26
(Revision of ISO/TS 18835:2004)
IEC/FDIS
60601-1-11
2014-11-26
2014-11-30
Petroleum, petrochemical and
natural gas industries — Axial
and centrifugal compressors and
expander-compressors — Part 2:
Non-integrally geared centrifugal
and axial compressors
(Revision of ISO 10439:2002)
Anaesthetic and respiratory
equipment
2014-11-10
Concrete, reinforced
concrete and pre-stressed
concrete
*
Industrial trucks — Verification
of stability — Part 22: Lateraland front-stacking trucks with
and without elevating operator
position
2014-11-26
Financial services
TC 71
ISO/FDIS
10406-1
ISO/ASME
FDIS 14414
Materials, equipment and
offshore structures for petroleum, petrochemical and
natural gas industries
TC 68
ISO 95641:2011/FDAmd
1
TC 115
Plastics
TC 67
ISO/FDIS
15589-1
Gas cylinders — Welded steel
pressure drums up to 3 000 litres
capacity for the transport of
gases — Design and construction — Part 1: Capacities up to 1
000 litres
*
2014-11-09
Buildings and civil engineering works
TC 61
ISO/FDIS
16396-1
ISO/FDIS
22915-22
Gas cylinders
*
TC 59
ISO/FDIS
16757-1
Essential oil of petitgrain, Paraguayan type (Citrus aurantium L.
var. Paraguay (syn. Citrus aurantium var. bigaradia Hook f.).)
(Revision of ISO 3064:2000)
2014-11-11
(Revision of ISO 5053:1987)
Essential oils
*
Industrial trucks — Terminology and classification — Part 1:
Types of industrial trucks
Plastics piping systems —
Glass-reinforced thermosetting
plastics (GRP) pipes — Determination of time to failure under
sustained internal pressure
(Revision of ISO 7509:2000)
2014-11-10
Corrosion of metals and
alloys
*
*
Corrosion of metals and alloys — Test method for high
temperature corrosion testing of
metallic materials by application
of a deposit of salt, ash, or other
substances
Corrosion of metals and alloys
— Test method for high temperature corrosion testing of metallic
materials by immersing in molten
salt or other liquids under static
conditions
2014-11-23
2014-11-16
7
ISO/FDIS
17248
*
TC 164
ISO/FDIS
6508-1
Corrosion of metals and alloys
— Test method for high temperature corrosion testing of metallic
materials by embedding in salt,
ash, or other solids
2014-11-23
ISO/FDIS
6508-3
*
Metallic materials — Rockwell
hardness test — Part 1: Test
method
2014-11-12
*
*
Metallic materials — Rockwell
hardness test — Part 2: Verification and calibration of testing
machines and indenters
(Revision of ISO 6508-2:2005)
Information technology — Telecommunications and information exchange between systems
— Local and metropolitan area
networks — Part 1AE: Media
access control (MAC) security —
Amendment 1: Galois Counter
Mode— — Advanced Encryption
Standard-256 (GCM-AES-256)
Cipher Suite
ISO/IEC/
IEEE 88021AE:2013/
FDAmd 2
*
Information technology — Telecommunications and information exchange between systems
— Local and metropolitan area
networks — Part 1AE: Media
access control (MAC) security —
Amendment 2: Extended Packet
Numbering
Metallic materials — Rockwell
hardness test — Part 3: Calibration of reference blocks
2014-11-26
ISO/IEC/IEEE
FDIS 18880
TC 174
Information technology — Ubiquitous green community control
network protocol
2014-11-26
ISO/IEC FDIS
27039
(Revision of ISO 6508-3:2005)
ISO/FDIS
18323
*
Mechanical testing of
metals
(Revision of ISO 6508-1:2005)
ISO/FDIS
6508-2
ISO/IEC/
IEEE 88021AE:2013/
FDAmd 1
*
Jewellery
*
Jewellery — Consumer confidence in the diamond industry
2014-11-19
TC 217
ISO/FDIS
16128-1
*
Guidelines on technical definitions and criteria for natural &
organic cosmetic ingredients and
products — Part 1: Definitions
for ingredients
TC 242
Energy Management
ISO/FDIS
50004
Energy management systems
— Guidance for the implementation, maintenance and improvement of an energy management
system
ISO/FDIS
50006
*
TC 244
ISO/FDIS
13574
2014-11-23
ISO/IEC FDIS
15944-4
Industrial furnaces and
associated processing
equipment
*
Industrial furnaces and associated processing equipment
— Vocabulary
Information technology
ISO/IEC/IEEE
FDIS 8802-22
Information technology — Telecommunications and information
exchange between systems —
Local and metropolitan area networks — Specific requirements
— Part 22: Cognitive Wireless
RAN Medium Access Control
(MCA) and Physical Layer (PHY)
Specifications: Policies and
Procedures for Operation in the
TV Bands
ISO/IEC FDIS
27043
ISO/IEC FDIS
23001-7
Energy management systems —
Measuring energy performance
using energy baselines (EnB) and
energy performance indicators
(EnPI) — General principles and
guidance
JTC 1
8
ISO/IEC FDIS
27040
Cosmetics
ISO/IEC FDIS
29197
2014-11-20
2015-02-16
*
*
*
*
*
Information technology — Security techniques — Selection,
deployment and operations of
intrusion detection systems
(IDPS)
(Revision of ISO/IEC
18043:2006)
Information technology — Security techniques — Storage
security
Information technology — Security techniques — Incident
investigation principles and
processes
Information technology — MPEG
systems technologies — Part 7:
Common encryption in ISO base
media file format files
(Revision of ISO/IEC
23001-7:2012)
Information technology — Business Operational View — Part 4:
Business transaction scenarios
— Accounting and economic
ontology
(Revision of ISO/IEC
15944-4:2007)
Information technology — Evaluation methodology for environmental influence in biometric
system performance
ISO/IEC FDIS
19395
*
Smart data centre resource
monitoring and control
ISO/IEC FDIS
30121
*
System and software engineering — Information technology
— Governance of digital forensic
risk framework
ISO/IEC FDIS
38500
*
2014-11-10
2014-11-04
2014-11-18
2014-11-18
2014-11-30
2014-11-10
2014-11-10
Information technology — Governance of IT for the organization
2014-11-16
(Revision of ISO/IEC
38500:2008)
ISO Update, Supplement to ISO Focus -- October 2014
TC 17
ISO
630-5:2014
Standards published
ISO
630-6:2014
New International Standards published between 01 September and
30 September 2014
ISO
683-18:2014
* Available in English only
Steel
*
*
*
Structural steels — Part 5: Technical
delivery conditions for structural steels
with improved atmospheric corrosion
resistance
C
Structural steels — Part 6: Technical
delivery conditions for seismic-proof
improved structural steels for building
C
Heat-treatable steels, alloy steels and
free-cutting steels — Part 18: Bright
steel products
G
Stainless steels for general purposes
— Part 1: Corrosion-resistant flat
products
F
** French version of standard previously published in English only
ISO
16143-1:2014
Price
group
IIW
ISO/TR
18786:2014
*
Health and safety in welding — Guidelines for risk assessment of welding
fabrication activities
Fasteners
ISO
10664:2014
Hexalobular internal driving feature for
bolts and screws
TC 22
C
*
Fasteners — Terminology — Part 2:
Vocabulary and definitions for coatings
G
TC 4
Rolling bearings
ISO 492:2014
Rolling bearings — Radial bearings
— Geometrical product specifications
(GPS) and tolerance values
ISO
3290-1:2014
TC 8
IEC/PAS
80005-3:2014
ISO
18541-3:2014
*
*
Ships and marine technology
*
*
*
*
Ships and marine technology — Marine
NOx reduction agent AUS 40 — Part 1:
Quality requirements
Ships and marine technology — Marine
NOx reduction agent AUS 40 — Part 3:
Handling, transportation and storage
B
Utility connections in port — Part 3:
Low Voltage Shore Connection (LVSC)
Systems — General requirements
TC 10
Technical product
documentation
ISO
10628-1:2014
Diagrams for the chemical and petrochemical industry — Part 1: Specification of diagrams
ISO Update, Supplement to ISO Focus -- October 2014
F
Road vehicles — Standardized access
to automotive repair and maintenance
information (RMI) — Part 3: Functional
user interface requirements
Tractors and machinery for agriculture and forestry
ISO
11783-12:2014
Tractors and machinery for agriculture
and forestry — Serial control and communications data network — Part 12:
Diagnostics services
TC 28
A
F
Road vehicles — Standardized access
to automotive repair and maintenance
information (RMI) — Part 2: Technical
requirements
TC 23
ISO/TR
19686-1:2014
Ships and marine technology — Marine
NOx reduction agent AUS 40 — Part 2:
Test methods
Road vehicles — Standardized access
to automotive repair and maintenance
information (RMI) — Part 1: General
information and use case definition
Road vehicles — Measurement of
driver visual behaviour with respect
to transport information and control
systems — Part 1: Definitions and
parameters
Rolling bearings — Balls — Part 2:
Ceramic balls
C
ISO
18611-3:2014
ISO
18541-2:2014
Road vehicles
*
G
Rolling bearings — Balls — Part 1:
Steel balls
ISO
3290-2:2014
ISO
18541-1:2014
ISO
15007-1:2002
C
ISO
18611-2:2014
Hot-rolled steel sheet of structural
quality
B
D
ISO
18611-1:2014
*
International Institute of Welding
TC 2
ISO
1891-2:2014
ISO 4995:2014
*
*
Petroleum products — Equivalency
of test method determining the same
property — Part 1: Atmospheric distillation of petroleum products
Small tools
ISO 6103:2014
Bonded abrasive products — Permissible unbalances of grinding wheels as
delivered — Static testing
TC 34
Food products
ISO
12228-2:2014
Determination of individual and total
sterols contents — Gas chromatographic method — Part 2: Olive oils
and olive pomace oils
TC 35
E
C
B
E
Petroleum products and
lubricants
TC 29
ISO/TS
17383:2014
F
Determination of the triacylglycerol composition of fats and oils
— Determination by capillary gas
chromatography
B
D
C
C
Paints and varnishes
C
9
ISO 2813:2014
Paints and varnishes — Determination of gloss value at 20 degrees, 60
degrees and 85 degrees
ISO
13803:2014
ISO
22007-6:2014
D
Paints and varnishes — Determination
of haze on paint films at 20 degrees
B
TC 39
Machine tools
ISO
14955-1:2014
Machine tools — Environmental evaluation of machine tools — Part 1: Design methodology for energy-efficient
machine tools
ISO 23010:2011/Amd
1:2014
Test code for machine tools — Part
10: Determination of the measuring
performance of probing systems of
numerically controlled machine tools —
Amendment 1: Measuring performance
with scanning probes
TC 42
ISO
18938:2014
Imaging materials — Optical discs
— Care and handling for extended
storage
TC 44
Welding and allied processes
ISO
25980:2014
Health and safety in welding and allied
processes — Transparent welding
curtains, strips and screens for arc
welding processes
TC 45
Rubber and rubber products
ISO 6806:2014
Rubber hoses and hose assemblies for
use in oil burners — Specification
*
ISO 4097:2014
*
TC 71
ISO
19338:2014
D
*
ISO
6361-3:2014
ISO 7663:2014
*
ISO
6361-4:2014
D
Rubber, ethylene-propylene-diene
(EPDM) — Evaluation procedure
*
Styrene-butadiene rubber (carbon
black or carbon black and oil masterbatches) — Evaluation procedure
Halogenated isobutene-isoprene
rubber (BIIR and CIIR) — Evaluation
procedures
ISO
2440:1997/
Amd 2:2014
Flexible and rigid cellular polymeric
materials — Accelerated ageing tests
— Amendment 2
TC 61
Plastics
ISO
17541:2014
ISO
15512:2014
*
Plastics — Quantitative evaluation of
scratch-induced damage and scratch
visibility
ISO
6362-2:2014
ISO
6362-7:2014
XZ
C
*
*
*
*
Wrought aluminium and aluminium
alloys — Sheets, strips and plates —
Part 2: Mechanical properties
Wrought aluminium and aluminium
alloys — Sheets, strips and plates —
Part 3: Strips: Tolerances on shape and
dimensions
Wrought aluminium and aluminium
alloys — Sheets, strips and plates —
Part 4: Sheets and plates: Tolerances
on shape and dimensions
Wrought aluminium and aluminium
alloys — Extruded rods/bars, tubes
and profiles — Part 2: Mechanical
properties
Wrought aluminium and aluminium
alloys — Extruded rods/bars, tubes
and profiles — Part 7: Chemical
composition
Nuclear energy, nuclear technologies, and radiological
protection
ISO
16641:2014
Measurement of radioactivity in the
environment — Air — Radon 220: Integrated measurement methods for the
determination of the average activity
concentration using passive solid-state
nuclear track detectors
TC 106
Dentistry
ISO
16635-2:2014
Dentistry — Dental rubber dam instruments — Part 2: Clamp forceps
B
B
G
A
C
D
A
C
A
TC 121
Anaesthetic and respiratory
equipment
ISO 5359:2014
Anaesthetic and respiratory equipment
— Low-pressure hose assemblies for
use with medical gases
TC 127
ISO
17253:2014
Plastics — Determination of water
content
A
Light metals and their alloys
*
B
B
Performance and assessment requirements for design standards on structural concrete
TC 85
D
TC 131
10
*
B
C
ISO 4659:2014
ISO
6361-2:2014
B
Concrete, reinforced concrete
and pre-stressed concrete
TC 79
Rubber hoses for automotive turbochargers — Specification
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for
the transfer of hydrocarbons, solvents
and chemicals — Specification
Plastics — Methyl methacrylateacrylonitrile-butadiene-styrene (MABS)
moulding and extrusion materials —
Part 1: Designation system and basis
for specifications
XZ
C
ISO
27126:2014
Plastics/rubber — Polymer dispersions and rubber latices (natural and
synthetic) — Definitions and review of
test methods
F
B
ISO
17324:2014
ISO
12000:2014
ISO
19066-1:2014
Photography
*
Plastics — Determination of thermal
conductivity and thermal diffusivity — Part 6: Comparative method
for low thermal conductivities using a
temperature-modulation technique
D
Earth-moving machinery
*
Earth-moving machinery and roughterrain variable-reach trucks — Design
requirements for machines intended to
be driven on road
C
Fluid power systems
ISO Update, Supplement to ISO Focus -- October 2014
ISO
16908:2014
Hydraulic filter element test methods
— Thermal conditioning and cold startup simulation
ISO
9345-2:2014
C
TC 147
Water quality
ISO
16308:2014
Water quality — Determination of
glyphosate and AMPA — Method using
high performance liquid chromatography (HPLC) with tandem mass spectrometric detection
D
Water quality — Enumeration of Escherichia coli and coliform bacteria —
Part 1: Membrane filtration method for
waters with low bacterial background
flora
B
ISO
9308-1:2014
TC 150
ISO
12891-2:2014
ISO
8598-1:2014
Implants for surgery
*
ISO
5832-4:2014
Retrieval and analysis of surgical
implants — Part 2: Analysis of retrieved
surgical implants
Implants for surgery — Metallic materials — Part 4: Cobalt-chromium-molybdenum casting alloy
ISO
5832-11:2014
Implants for surgery — Metallic materials — Part 11: Wrought titanium
6-aluminium 7-niobium alloy
TC 160
Glass in building
ISO
11485-3:2014
Glass in building — Curved glass
— Part 3: Requirements for curved
tempered and curved laminated safety
glass
TC 164
Mechanical testing of metals
ISO
6506-1:2014
Metallic materials — Brinell hardness
test — Part 1: Test method
*
ISO
11978:2014
ISO
11979-6:2014
ISO
14730:2014
*
A
A
ISO/TS
19979:2014
IEC 80601-258:2014
B
C
*
*
B
Optics and optical instruments —
Focimeters — Part 1: General purpose
instruments
E
Ophthalmic optics — Contact
lenses and contact lens care products
— Labelling
B
Ophthalmic implants — Intraocular
lenses — Part 6: Shelf-life and transport stability testing
B
Ophthalmic optics — Contact lens care
products — Antimicrobial preservative efficacy testing and guidance on
determining discard date
E
ISO
18259:2014
Microscopes — Imaging distances
related to mechanical reference planes
— Part 2: Infinity-corrected optical
systems
Ophthalmic optics — Contact lens care
products — Method to assess contact
lens care products with contact lenses
in a lens case, challenged with bacterial and fungal organisms
Ophthalmic optics — Contact lenses
— Hygienic management of multipatient use trial contact lenses
Medical electrical equipment — Part
2-58: Particular requirements for basic
safety and essential performance of
lens removal devices and vitrectomy
devices for ophthalmic surgery
TC 173
Assistive products for persons
with disability
ISO
7176-22:2014
Wheelchairs — Part 22: Set-up
procedures
D
B
B
G
E
ISO
6506-2:2014
Metallic materials — Brinell hardness
test — Part 2: Verification and calibration of testing machines
ISO
6506-3:2014
Metallic materials — Brinell hardness
test — Part 3: Calibration of reference
blocks
ISO
6506-4:2014
C
TC 189
Ceramic tile
ISO
10545-1:2014
Ceramic tiles — Part 1: Sampling and
basis for acceptance
B
B
Metallic materials — Brinell hardness
test — Part 4: Table of hardness values
TC 190
Soil quality
ISO
14388-1:2014
Soil quality — Acid-base accounting
procedure for acid sulfate soils — Part
1: Introduction and definitions, symbols
and acronyms, sampling and sample
preparation
B
TC 171
ISO/TR
17797:2014
ISO/TR
18160:2014
Document management
applications
*
*
TC 172
ISO
14135-1:2014
ISO
14135-2:2014
Electronic archiving — Selection of
digital storage media for long term
preservation
Document management — Digital
preservation — Analog recording to
silver-gelatin microform
ISO
14388-2:2014
D
*
Optics and photonics — Specifications for telescopic sights — Part 1:
General-purpose instruments
Optics and photonics — Specifications
for telescopic sights — Part 2: Highperformance instruments
ISO Update, Supplement to ISO Focus -- October 2014
TC 193
Natural gas
ISO/TR
22302:2014
Natural gas — Calculation of methane
number
ISO
16960:2014
A
A
C
B
B
Optics and photonics
*
Soil quality — Acid-base accounting
procedure for acid sulfate soils — Part
2: Chromium reducible sulfur (CRS)
methodology
C
Natural gas — Determination of sulfur
compounds — Determination of total
sulfur by oxidative microcoulometry
method
TC 194
Biological and clinical evaluation
of medical devices
ISO
10993-3:2014
Biological evaluation of medical
devices — Part 3: Tests for genotoxicity, carcinogenicity and reproductive
toxicity
B
E
11
TC 195
Building construction machinery
and equipment
ISO
18650-2:2014
Building construction machinery and
equipment — Concrete mixers — Part
2: Procedure for examination of mixing
efficiency
TC 201
ISO
17560:2014
Surface chemical analysis
*
TC 204
ISO/TS
21219-2:2014
Surface chemical analysis — Secondary-ion mass spectrometry — Method
for depth profiling of boron in silicon
B
Intelligent transport systems
*
Intelligent transport systems — Traffic
and travel information (TTI) via transport protocol experts group, generation
2 (TPEG2) — Part 2: UML modelling
rules
TC 207
Environmental management
ISO/TS
14071:2014
Environmental management — Life
cycle assessment — Critical review
processes and reviewer competencies:
Additional requirements and guidelines
to ISO 14044:2006
TC 212
ISO
15189:2012
D
F
B
Clinical laboratory testing and in
vitro diagnostic test systems
*
Medical laboratories — Requirements
for quality and competence
G
TC 213
Dimensional and geometrical
product specifications and
verification
ISO
16610-71:2014
Geometrical product specifications
(GPS) — Filtration — Part 71: Robust
areal filters: Gaussian regression filters
TC 215
ISO
17090-4:2014
D
Health informatics
*
ISO
22600-1:2014
ISO
22600-2:2014
ISO
22600-3:2014
Health informatics — Public key infrastructure — Part 4: Digital Signatures
for healthcare documents
D
Health informatics — Privilege management and access control — Part 1:
Overview and policy management
E
Health informatics — Privilege management and access control — Part 2:
Formal models
D
Health informatics — Privilege management and access control — Part 3:
Implementations
G
TC 217
Cosmetics
ISO
17516:2014
Cosmetics — Microbiology — Microbiological limits
ISO/IEC 88244:2008/Cor
1:2014
*
ISO/IEC 88251:2008/Cor
2:2014
*
ISO/IEC 88254:2008/Cor
2:2014
*
ISO/IEC 88255:2008/Cor
2:2014
*
ISO/IEC
17811-3:2014
*
ISO/IEC 15391:2010/Cor
3:2014
*
ISO/IEC
18031:2011/
Cor 1:2014
*
ISO/IEC
19772:2009/
Cor 1:2014
*
ISO/IEC
27001:2013/
Cor 1:2014
*
ISO/IEC
27002:2013/
Cor 1:2014
*
ISO/IEC
18000-7:2014
*
Information technology — Abstract
Syntax Notation One (ASN.1): Parameterization of ASN.1 specifications —
Part 4: — Technical Corrigendum 1
Information technology — ASN.1
encoding rules: Specification of Basic
Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished
Encoding Rules (DER) — Part 1: —
Technical Corrigendum 2
Information technology — ASN.1
encoding rules: XML Encoding Rules
(XER) — Part 4: — Technical Corrigendum 2
Information technology — ASN.1
encoding rules: Mapping W3C XML
schema definitions into ASN.1 — Part
5: — Technical Corrigendum 2
free
free
free
free
Information Technology — Device
control and management — Part 3:
Specification of Reliable Message
Delivery Protocol
Information technology — Programming languages — Fortran — Part 1:
Base language — Technical Corrigendum 3
C
free
Information technology — Security
techniques — Random bit generation
— Technical Corrigendum 1
free
Information technology — Security
techniques — Authenticated encryption — Technical Corrigendum 1
free
Information technology — Security
techniques — Information security
management systems — Requirements
— Technical Corrigendum 1
Information technology — Security
techniques — Code of practice for
information security controls — Technical Corrigendum 1
free
free
Information technology — Radio frequency identification for item management — Part 7: Parameters for active
air interface communications at 433
MHz
H
Standards confirmed
The following International Standards are confimred for a five year
period:
A
TC 244
ISO
13577-2:2014
Industrial furnaces and associated processing equipment
*
JTC 1
ISO/IEC 88241:2008/Cor
2:2014
12
Industrial furnaces and associated processing equipment — Safety — Part 2:
Combustion and fuel handling systems
H
Information technology
*
Information technology — Abstract
Syntax Notation One (ASN.1): Specification of basic notation — Part 1: —
Technical Corrigendum 2
TC 2
Fasteners
ISO 1478:1999
(reconfirmed)
ISO 10666:1999
(reconfirmed)
ISO 15480:1999
(reconfirmed)
ISO 15481:1999
(reconfirmed)
ISO 15482:1999
(reconfirmed)
ISO 15483:1999
(reconfirmed)
ISO 4042:1999
free
ISO Update, Supplement to ISO Focus -- October 2014
TC 5
Ferrous metal pipes and metallic
fittings
ISO 8262-3:2005
(reconfirmed)
ISO 8967:2005
(reconfirmed)
ISO 3419:1981
(reconfirmed)
ISO 9232:2003
(reconfirmed)
ISO 7005-2:1988
(reconfirmed)
ISO 11866-1:2005
(reconfirmed)
ISO 7005-3:1988
(reconfirmed)
ISO 11866-2:2005
(reconfirmed)
TC 6
Paper, board and pulps
ISO 13875:2005
(reconfirmed)
ISO 14461-1:2005
(reconfirmed)
ISO 8791-3:2005
TC 8
Ships and marine technology
ISO 14461-2:2005
(reconfirmed)
ISO 15516:2006
(reconfirmed)
ISO 14674:2005
(reconfirmed)
TC 20
Aircraft and space vehicles
ISO 15322:2005
(reconfirmed)
ISO 2574:1994
(reconfirmed)
ISO 22935-1:2009
ISO 5866:1983
(reconfirmed)
ISO 22935-2:2009
ISO 6859-1:1982
(reconfirmed)
ISO 22935-3:2009
ISO 8668-1:1986
(reconfirmed)
ISO 26323:2009
ISO 8668-3:1994
(reconfirmed)
ISO 5843-1:1985
(reconfirmed)
ISO/TS
19036:2006
ISO 5843-8:1988
(reconfirmed)
TC 22
Road vehicles
ISO 6813:1998
(reconfirmed)
ISO 12353-2:2003
(reconfirmed)
ISO 13216-1:1999
(reconfirmed)
ISO 13216-2:2004
(reconfirmed)
TC 23
Tractors and machinery for agriculture
and forestry
(reconfirmed)
ISO 5983-2:2009
TC 35
Paints and varnishes
ISO 11998:2006
ISO 8501-3:2006
(reconfirmed)
ISO 11126-9:1999
(reconfirmed)
TC 36
Cinematography
ISO 2404:1986
(reconfirmed)
ISO 6035:1983
(reconfirmed)
TC 38
Textiles
ISO 11520-1:1997
(reconfirmed)
ISO 4167:2006
(reconfirmed)
ISO 17080:2005
(reconfirmed)
ISO 105-F10:1989
(reconfirmed)
TC 24
Particle characterization including
sieving
ISO 7768:2009
ISO 789-12:2000
ISO 7769:2009
ISO 13317-1:2001
ISO 7770:2009
ISO 13318-1:2001
TC 39
ISO 15900:2009
ISO 230-3:2007
ISO 15901-3:2007
TC 44
ISO 21501-2:2007
ISO 5173:2009
ISO 21501-3:2007
Machine tools
Welding and allied processes
ISO 14327:2004
TC 28
Petroleum products and lubricants
ISO 5172:2006
ISO 2049:1996
(reconfirmed)
TC 29
Small tools
ISO/TR
17671-2:2002
(reconfirmed)
ISO 9455-17:2002
ISO 13942:2000
(reconfirmed)
TC 45
Rubber and rubber products
ISO 1174-2:1996
(reconfirmed)
ISO 1307:2006
(reconfirmed)
ISO 1703:2005
(reconfirmed)
ISO 1401:1999
(reconfirmed)
ISO 9243:1988
(reconfirmed)
ISO 1402:2009
TC 30
Measurement of fluid flow in closed
conduits
ISO 1436:2009
ISO 6817:1992
(reconfirmed)
ISO 3949:2009
ISO 13359:1998
(reconfirmed)
ISO 4023:2009
TC 34
Food products
ISO 4079:2009
ISO 691:2005
(reconfirmed)
ISO 4080:2009
ISO 659:2009
ISO 3727-3:2003
ISO 2398:2006
(reconfirmed)
ISO 5764:2009
ISO 5774:2006
(reconfirmed)
ISO 7662:1988
(reconfirmed)
ISO 6730:2005
(reconfirmed)
ISO 8031:2009
ISO 7889:2003
(reconfirmed)
ISO 5478:2006
(reconfirmed)
ISO 8156:2005
(reconfirmed)
ISO 705:1994
(reconfirmed)
ISO 8262-1:2005
(reconfirmed)
ISO 1125:1999
(reconfirmed)
(reconfirmed)
ISO 1126:2006
(reconfirmed)
ISO 8262-2:2005
ISO Update, Supplement to ISO Focus -- October 2014
13
ISO 1304:2006
(reconfirmed)
ISO 13982-2:2004
ISO 1409:2006
(reconfirmed)
ISO 16602:2007
ISO 1658:2009
TC 98
ISO 2006-1:2009
ISO 4354:2009
ISO 2006-2:2009
ISO 2028:1999
ISO 4655:1985
TC 100
Chains and chain sprockets for power
transmission and conveyors
ISO 13203:2005
(reconfirmed)
TC 106
Dentistry
(reconfirmed)
ISO 2930:2009
(reconfirmed)
Bases for design of structures
ISO 4049:2009
ISO 6209:2009
ISO 6225-1:2006
(reconfirmed)
ISO 6877:2006
(reconfirmed)
ISO 8312:1999
(reconfirmed)
(reconfirmed)
ISO 9252:1989
(reconfirmed)
ISO/TS
14569-2:2001
ISO 11235:1999
(reconfirmed)
TC 108
Mechanical vibration, shock and condition monitoring
ISO/TS
16176:2011
ISO 19499:2007
(reconfirmed)
ISO 2631-1:1997
ISO 21171:2006
(reconfirmed)
ISO 21869:2006
(reconfirmed)
ISO 2631-1:1997/
Amd 1:2010
ISO 22768:2006
(reconfirmed)
ISO 2231:1989
(reconfirmed)
ISO 2321:2006
(reconfirmed)
ISO 4646:1989
(reconfirmed)
ISO 5979:1982
(reconfirmed)
ISO 6451:1982
(reconfirmed)
ISO 20299-1:2006
ISO 25518:2009
TC 46
Information and documentation
ISO 8459:2009
ISO 28500:2009
TC 47
Chemistry
ISO 11014:2009
TC 58
Gas cylinders
ISO 25760:2009
TC 59
Buildings and civil engineering works
ISO 13640:1999
(reconfirmed)
TC 61
Plastics
ISO 10093:1998
ISO 1269:2006
(reconfirmed)
ISO 16770:2004
(reconfirmed)
ISO 5805:1997
(reconfirmed)
TC 110
Industrial trucks
ISO 5053:1987
(reconfirmed)
TC 113
Hydrometry
ISO 4362:1999
(reconfirmed)
TC 117
Fans
ISO 27327-1:2009
TC 118
Compressors and pneumatic tools,
machines and equipment
ISO 5388:1981
(reconfirmed)
TC 119
Powder metallurgy
ISO 2740:2009
ISO 3327:2009
TC 122
Packaging
ISO 6590-1:1983
(reconfirmed)
ISO 6591-1:1984
(reconfirmed)
ISO 6591-2:1985
(reconfirmed)
ISO 6599-1:1983
(reconfirmed)
ISO 7023:1983
(reconfirmed)
ISO 7965-1:1984
(reconfirmed)
ISO 7965-2:1993
(reconfirmed)
ISO 8367-1:1993
(reconfirmed)
TC 69
Applications of statistical methods
ISO 5725-5:1998
(reconfirmed)
ISO 8367-2:1993
(reconfirmed)
ISO 11843-4:2003
(reconfirmed)
ISO 15867:2003
(reconfirmed)
TC 71
Concrete, reinforced concrete and prestressed concrete
TC 126
Tobacco and tobacco products
ISO 18144:2003
(reconfirmed)
ISO 18145:2003
(reconfirmed)
ISO 21147:2003
(reconfirmed)
TC 138
Plastics pipes, fittings and valves for
the transport of fluids
ISO 1167-2:2006
(reconfirmed)
ISO 1920-5:2004
(reconfirmed)
ISO 6274:1982
(reconfirmed)
ISO 6782:1982
(reconfirmed)
ISO 6783:1982
(reconfirmed)
ISO 7033:1987
(reconfirmed)
TC 76
Transfusion, infusion and injection, and
blood processing equipment for medical and pharmaceutical use
TC 146
Air quality
ISO 15767:2009
ISO 8536-3:2009
TC 86
Refrigeration and air-conditioning
ISO/R 916:1968
(reconfirmed)
TC 94
Personal safety -- Protective clothing
and equipment
14
ISO 18672-1:2009
ISO 16622:2002
(reconfirmed)
ISO
16000-14:2009
TC 147
Water quality
ISO Update, Supplement to ISO Focus -- October 2014
ISO/TS
20612:2007
(reconfirmed)
ISO/IEC
19793:2008
ISO 22478:2006
(reconfirmed)
ISO 23631:2006
(reconfirmed)
ISO/IEC
19796-3:2009
ISO 14442:2006
(reconfirmed)
TC 153
Valves
ISO 7121:2006
(reconfirmed)
TC 156
Corrosion of metals and alloys
ISO 10062:2006
(reconfirmed)
ISO 11306:1998
(reconfirmed)
ISO 11474:1998
(reconfirmed)
ISO 11782-1:1998
(reconfirmed)
ISO 11782-2:1998
(reconfirmed)
ISO 11844-1:2006
(reconfirmed)
TC 10
Technical product documentation
ISO 11844-2:2005
(reconfirmed)
ISO 10628:1997
ISO 16151:2005
(reconfirmed)
(replaced by ISO 10628-1:2014, ISO
10628-2:2012)
ISO 16784-1:2006
(reconfirmed)
TC 17
Steel
ISO 16784-2:2006
(reconfirmed)
ISO 4952:2006
(replaced by ISO 630-5:2014)
ISO 17475:2005
(reconfirmed)
ISO 24314:2006
(replaced by ISO 630-6:2014)
TC 163
Thermal performance and energy use
in the built environment
TC 20
Aircraft and space vehicles
(replaced by ISO 21100:2014)
Standards withdrawn
Period from 01 September to 30 September 2014
ISO 12567-2:2005
(reconfirmed)
ISO/PAS
21100:2011
TC 165
Timber structures
TC 34
Food products
ISO 16670:2003
(reconfirmed)
ISO 12228:1999
TC 171
Document management applications
(replaced by ISO 12228-1:2014, ISO
12228-2:2014)
TC 61
Plastics
ISO 10366-1:2002
(replaced by ISO 19066-1:2014)
TC 172
Optics and photonics
ISO 8598:1996
(replaced by ISO 8598-1:2014)
ISO 11506:2009
TC 172
Optics and photonics
ISO 10110-8:2010
ISO 10935:2009
ISO 11884-1:2006
(reconfirmed)
ISO 11884-2:2007
(reconfirmed)
TC 174
Jewellery
ISO 11489:1995
(reconfirmed)
TC 190
Soil quality
ISO 11272:1998
(reconfirmed)
ISO 11274:1998
(reconfirmed)
ISO 11508:1998
(reconfirmed)
TC 192
Gas turbines
TC 215
Health informatics
ISO/TS
22600-1:2006
(replaced by ISO 22600-1:2014)
ISO/TS
22600-2:2006
(replaced by ISO 22600-2:2014)
ISO/TS
22600-3:2009
(replaced by ISO 22600-3:2014)
ISO 21789:2009
TC 201
Surface chemical analysis
ISO 23812:2009
Meeting calendar
TC 206
Fine ceramics
ISO 15732:2003
(reconfirmed)
(update at 01 September 2014)
ISO 18452:2005
(reconfirmed)
Meetings called for the month of August are not in this edition.
ISO 18755:2005
(reconfirmed)
* Information definite but meeting not yet formally convened
ISO 18756:2003
(reconfirmed)
** Provisional
ISO 20502:2005
(reconfirmed)
ISO 20505:2005
(reconfirmed)
September-November 2014
ISO 20508:2003
(reconfirmed)
4-4
ISO 24369:2005
(reconfirmed)
ISO 24370:2005
(reconfirmed)
ISO 26423:2009
JTC 1
Information technology
ISO/IEC
11801:2002
ISO Update, Supplement to ISO Focus -- October 2014
Beijing (China)
TC 83
Sports and other
recreational facilities
and equipment
September-October 2014
22-3
Salamanca
(Spain)
JTC 1/SC 17
Information technology/Cards and personal identification
29-2
Berlin (Germany)
PC 272
Forensic sciences
15
29-3
Bad Kohlgrub
(Germany)
TC 94/SC 15
Personal safety -Protective clothing
and equipment/
Respiratory protective
devices
29-3
Paris (France)
TC 218
Timber
30-1
London (United
Kingdom)
PC 286
Collaborative
business relationship management
-- Framework
30-3
Fortaleza (Brazil)
TC 28
Petroleum products
and lubricants
TC 28/SC 4
Petroleum products and lubricants/
Classifications and
specifications
October 2014
1
Fortaleza (Brazil)
8-9
San Antonio
(USA)
TC 70/SC 8
Internal combustion engines/Exhaust gas emission
measurement
8-10
London (United
Kingdom)
TC 25
Cast irons and pig
irons
9
Beijing (China)
TC 180/SC 1
Solar energy/Climate
- Measurement and
data
9
Beijing (China)
TC 180/SC 4
Solar energy/Systems
- Thermal performance, reliability and
durability
9-10
Bremen
(Germany)
TC 20/SC 4
Aircraft and space
vehicles/Aerospace
fastener systems
10
Tokyo (Japan)
TC 17/SC 7
Steel/Methods of
testing (other than
mechanical tests and
chemical analysis)
10
Copenhagen
(Denmark)
TC 34/SC 18
Food products/Cocoa
10
Paris (France)
TC 92/SC 1
Fire safety/Fire initiation and growth
10
Beijing (China)
1
Fortaleza (Brazil)
TC 28/SC 7
Petroleum products
and lubricants/Liquid
Biofuels
1
Milan (Italy)
TC 39/SC 4
Machine tools/Woodworking machines
3
Colombo (Sri
Lanka)
JTC 1/SC 2
Information technology/Coded character
sets
TC 180
Solar energy
3
Paris (France)
TC 86/SC 1
Refrigeration and airconditioning/Safety
and environmental
requirements for refrigerating systems
13-14 Troy (USA)
TC 22/SC 11
Road vehicles/Safety
glazing materials
13-15 Miami (USA)
TC 44/SC 3
Welding and allied
processes/Welding
consumables
13-15 Antigua
(Guatemala)
TC 285
Clean cookstoves
and clean cooking
solutions
13-16 TromsГё (Norway)
TC 67/SC 8
Materials, equipment
and offshore structures for petroleum,
petrochemical and
natural gas industries/
Arctic operations
13-17 London (United
Kingdom)
TC 131
Fluid power systems
13-17 Kuala Lumpur
(Malaysia)
TC 181
Safety of toys
14-16 Suzhou (China)
TC 164/SC 5
Mechanical testing of
metals/Fatigue testing
14-17 Buenos Aires
(Argentina)
TC 279
Innovation
management
15
Suzhou (China)
TC 164/SC 1
Mechanical testing
of metals/Uniaxial
testing
15
Suzhou (China)
TC 164/SC 4
Mechanical testing
of metals/Toughness
testing -- Fracture (F),
Pendulum (P), Tear (T)
3
Paris (France)
TC 86/SC 8
Refrigeration and airconditioning/Refrigerants and refrigeration
lubricants
6
Seattle (USA)
JTC 1/SC 31
Information technology/Automatic identification and data
capture techniques
6
Genoa (Italy)
TC 8/SC 12
Ships and marine
technology/Ships and
marine technology Large yachts
6
Bremen
(Germany)
TC 20/SC 6
Aircraft and space
vehicles/Standard
atmosphere
6-8
Bremen
(Germany)
TC 20
Aircraft and space
vehicles
6-10
Sao Paulo
(Brazil)
JTC 1/SC 38
Information technology/Distributed
application platforms
and services (DAPS)
6-10
Berlin (Germany)
TC 215
Health informatics
6-11
Prague (Czech
Republic)
TC 135
Non-destructive
testing
8
Virtual
(Unknown)
President's
committee
President's
committee
15-16 Pirmasens
(Germany)
TC 137
8
Hamburg
(Germany)
TC 8/SC 7
Ships and marine
technology/Inland
navigation vessels
Footwear sizing designations and marking
systems
15-17 Toronto (Canada)
TC 212
8
San Antonio
(USA)
TC 70
Internal combustion
engines
Clinical laboratory
testing and in vitro diagnostic test systems
16
Suzhou (China)
TC 164/SC 3
8
Vienna (Austria)
TC 138/SC 6
Plastics pipes, fittings
and valves for the
transport of fluids/
Reinforced plastics
pipes and fittings for
all applications
Mechanical testing
of metals/Hardness
testing
16
Pirmasens
(Germany)
TC 216
Footwear
TC 58/SC 2
Gas cylinders/Cylinder fittings
16
16-17 Praha (Czech
Republic)
ISO Update, Supplement to ISO Focus -- October 2014
16-17 Suzhou (China)
TC 164/SC 2
Mechanical testing
of metals/Ductility
testing
17
Tokyo (Japan)
TC 22/SC 7
Road vehicles/Injection equipment and
filters for use on road
vehicles
17
London (United
Kingdom)
TC 131/SC 5
Fluid power systems/
Control products and
components
17
London (United
Kingdom)
TC 131/SC 9
Fluid power systems/
Installations and
systems
17
Seoul (Korea,
Republic of)
TC 153
Valves
17
Seoul (Korea,
Republic of)
TC 153/SC 1
Valves/Design, manufacture, marking and
testing
20-21 Seoul (Korea,
Republic of)
TC 209
20-22 LiГЁge (Belgium)
20-23 Tokyo (Japan)
21
Seoul (Korea,
Republic of)
TC 138/SC 1
Plastics pipes, fittings
and valves for the
transport of fluids/
Plastics pipes and
fittings for soil, waste
and drainage (including land drainage)
21
Virtual
(Unknown)
TC 173/SC 2
Assistive products for
persons with disability/Classification and
terminology
21-23 Seoul (Korea,
Republic of)
TC 58/SC 3
Gas cylinders/Cylinder design
22
Vienna (Austria)
TC 123/SC 2
Plain bearings/Materials and lubricants,
their properties,
characteristics, test
methods and testing
conditions
Cleanrooms and associated controlled
environments
22
Vienna (Austria)
TC 123/SC 3
Plain bearings/Dimensions, tolerances and
construction details
TC 266
Biomimetics
22
Tractors and machinery for agriculture
and forestry/Manually portable forest
machinery
Seoul (Korea,
Republic of)
TC 138/SC 2
TC 23/SC 17
Plastics pipes, fittings
and valves for the
transport of fluids/
Plastics pipes and
fittings for water
supplies
20-24 London (United
Kingdom)
JTC 1/SC 6
Information technology/Telecommunications and information
exchange between
systems
22
Seoul (Korea,
Republic of)
TC 138/SC 4
20-24 Mexico City
(Mexico)
JTC 1/SC 27
Information technology/IT Security
techniques
Plastics pipes, fittings
and valves for the
transport of fluids/
Plastics pipes and
fittings for the supply
of gaseous fuels
22-23 Paris (France)
TC 22/SC 9
20-24 Strasbourg
(France)
JTC 1/SC 29
Information technology/Coding of audio,
picture, multimedia
and hypermedia
information
Road vehicles/Vehicle
dynamics and roadholding ability
23
Vienna (Austria)
TC 123/SC 5
Plain bearings/
Quality analysis and
assurance
23
Vienna (Austria)
TC 123/SC 6
20-24 Prague (Czech
Republic)
TC 121/SC 6
Anaesthetic and respiratory equipment/
Medical gas systems
Plain bearings/Terms
and common items
23
Seoul (Korea,
Republic of)
TC 138/SC 3
20-24 Nunspeet
(Netherlands)
TC 149/SC 1
Cycles/Cycles and
major sub-assemblies
20-24 Incheon (Korea,
Republic of)
TC 154
Processes, data
elements and
documents in commerce, industry and
administration
Plastics pipes, fittings
and valves for the
transport of fluids/
Plastics pipes and
fittings for industrial
applications
23
Seoul (Korea,
Republic of)
TC 138/SC 5
20-24 St. Petersburg,
Florida (USA)
TC 188/SC 1
Small craft/Personal
safety equipment
20-24 Berlin (Germany)
TC 190
Soil quality
20-24 Berlin (Germany)
TC 190/SC 1
Soil quality/Evaluation
of criteria, terminology and codification
Plastics pipes, fittings
and valves for the
transport of fluids/
General properties
of pipes, fittings
and valves of plastic
materials and their
accessories -- Test
methods and basic
specifications
20-24 Berlin (Germany)
TC 190/SC 2
Soil quality/Sampling
23
Seoul (Korea,
Republic of)
TC 138/SC 7
20-24 Berlin (Germany)
TC 190/SC 3
Soil quality/Chemical methods and soil
characteristics
20-24 Berlin (Germany)
TC 190/SC 4
Soil quality/Biological
methods
Plastics pipes, fittings
and valves for the
transport of fluids/
Valves and auxiliary
equipment of plastics
materials
23
TC 190/SC 7
Soil quality/Soil and
site assessment
Seoul (Korea,
Republic of)
TC 138/SC 8
20-24 Berlin (Germany)
Plastics pipes, fittings
and valves for the
transport of fluids/Rehabilitation of pipeline
systems
TC 58
Gas cylinders
23-24 Seoul (Korea,
Republic of)
ISO Update, Supplement to ISO Focus -- October 2014
17
23-24 Tokyo (Japan)
TC 79/SC 2
Light metals and
their alloys/Organic and anodic
oxidation coatings on
aluminium
23-24 Pretoria (South
Africa)
TC 178
Lifts, escalators and
moving walks
24
Sydney
(Australia)
TC 92/SC 3
Fire safety/Fire
threat to people and
environment
24
Sydney
(Australia)
TC 92/SC 4
Fire safety/Fire safety
engineering
24
Vienna (Austria)
TC 123
Plain bearings
24
Vienna (Austria)
TC 123/SC 7
Plain bearings/Special types of plain
bearings
24
Seoul (Korea,
Republic of)
TC 138
Plastics pipes, fittings
and valves for the
transport of fluids
24
Paris (France)
TC 227
Springs
27
Panama
(Panama)
TC 8/SC 6
Ships and marine technology/
Navigation and ship
operations
27
Panama
(Panama)
TC 8/SC 11
Ships and marine
technology/Intermodal and Short Sea
Shipping
Panama
(Panama)
TC 8/SC 13
Ships and marine
technology/Marine
technology
27-29 London (United
Kingdom)
PC 280
Management
Consultancy
27-30 St-Louis (USA)
JTC 1/SC 22
27
29
London (United
Kingdom)
TC 104/SC 2
Freight containers/
Specific purpose
containers
29-31 Tokyo (Japan)
TC 20/SC 10
Aircraft and space
vehicles/Aerospace
fluid systems and
components
31
Toronto (Canada)
TC 59/SC 2
Buildings and civil
engineering works/
Terminology and
harmonization of
languages
31
Toronto (Canada)
TC 59/SC 17
Buildings and civil engineering works/Sustainability in buildings
and civil engineering
works
November 2014
1
Toronto (Canada)
TC 59
Buildings and civil
engineering works
1
Toronto (Canada)
TC 59/SC 3
Buildings and civil
engineering works/
Functional/user
requirements and
performance in building construction
1
Toronto (Canada)
TC 59/SC 13
Buildings and civil
engineering works/
Organization of
information about
construction works
2-7
Belfort (France)
TC 184/SC 4
Automation systems
and integration/Industrial data
Information technology/Programming
languages, their environments and system
software interfaces
3-4
Tel Aviv (Israel)
TC 282/SC 1
Water re-use/Treated
wastewater re-use for
Irrigation
3-5
Madrid (Spain)
PC 252
Natural gas fuelling
stations for vehicles
27-31 Panama
(Panama)
TC 8
Ships and marine
technology
3-5
Washington, D.C
(USA)
TC 241
Road traffic safety
management systems
27-31 Vancouver
(Canada)
TC 204
Intelligent transport
systems
3-7
Singapore
(Singapore)
PC 277
Sustainable
procurement
27-31 Berlin (Germany)
TC 264
Fireworks
3-7
TC 59/SC 8
Buildings and civil
engineering works/
Sealants
Cape Town
(South Africa)
TC 45
28
Rubber and rubber
products
3-7
Cape Town
(South Africa)
TC 45/SC 1
Rubber and rubber
products/Rubber and
plastics hoses and
hose assemblies
3-7
Cape Town
(South Africa)
TC 45/SC 2
Rubber and rubber
products/Testing and
analysis
3-7
Wuhan (China)
TC 183
Copper, lead, zinc
and nickel ores and
concentrates
3-7
New Delhi (India)
TC 229
Nanotechnologies
3-7
Lisbon (Portugal)
TC 282
Water re-use
5-6
Lisbon (Portugal)
TC 34/SC 4
Food products/Cereals and pulses
5-6
Tel Aviv (Israel)
TC 282/SC 3
Water re-use/Risk
and performance
evaluation of water
re-use systems
6
Cape Town
(South Africa)
TC 45/SC 4
Rubber and rubber
products/Products
(other than hoses)
6
Istanbul (Turkey)
TC 270
Plastics and rubber
machines
28
Toronto (Canada)
Vienna (Austria)
TC 79/SC 5
Light metals and their
alloys/Magnesium
and alloys of cast or
wrought magnesium
28-29 New York (USA)
TC 5
Ferrous metal pipes
and metallic fittings
28-29 Berlin (Germany)
TC 23/SC 3
Tractors and machinery for agriculture and
forestry/Safety and
comfort
28-29 Paris (France)
TC 290
Online reputation
28-30 Sydney
(Australia)
TC 17/SC 1
Steel/Methods of determination of chemical composition
29
Toronto (Canada)
TC 59/SC 14
Buildings and civil
engineering works/
Design life
29
Toronto (Canada)
TC 59/SC 15
Buildings and civil
engineering works/
Performance description of houses
29
18
Vienna (Austria)
TC 79
Light metals and their
alloys
ISO Update, Supplement to ISO Focus -- October 2014
7
San Diego (USA)
TC 22/SC 10
Road vehicles/Impact
test procedures
4-5
Fukuoka (Japan)
TC 197
Hydrogen
technologies
7
San Diego (USA)
TC 22/SC 12
Road vehicles/Passive safety crash
protection systems
8-10
London (United
Kingdom)
TC 147/SC 3
Water quality/Radioactivity
measurements
7
Cape Town
(South Africa)
TC 45/SC 3
Rubber and rubber
products/Raw materials (including latex)
for use in the rubber
industry
9-12
Madrid (Spain)
PC 273
Customer contact
centres
17
Frankfurt
(Germany)
TC 291
Domestic gas cooking appliances
1-4
Copenhagen
(Denmark)
TC 98/SC 2
Bases for design of
structures/Reliability
of structures
1-4
Copenhagen
(Denmark)
TC 98/SC 3
Bases for design of
structures/Loads,
forces and other
actions
TC 69/SC 4
Applications of statistical methods/Applications of statistical
methods in process
management
JTC 1/SC 37
Information
technology/
Biometrics
10-11 Edinburgh (United Kingdom)
TC 171/SC 2
Document management applications/
Application issues
11-14 Ottawa (Canada)
TC 244
Industrial furnaces
and associated processing equipment
12
TC 22/SC 3
Road vehicles/Electrical and electronic
equipment
LEMONT (USA)
13-14 Berlin (Germany)
TC 182/SC 1
Geotechnics/Geotechnical investigation and testing
14-20 Beijing (China)
TC 130
Graphic technology
15-20 Abu Dhabi
(United Arab
Emirates)
JTC 1
Information
technology
17-21 Florida (USA)
TC 108/SC 2
Mechanical vibration,
shock and condition
monitoring/Measurement and evaluation of mechanical
vibration and shock
as applied to machines, vehicles and
structures
18-20 Madrid (Spain)
TC 34/SC 7
Food products/Spices, culinary herbs and
condiments
19
TC 234
Fisheries and
aquaculture
19-21 Delft
(Netherlands)
TC 23/SC 13
Tractors and machinery for agriculture
and forestry/Powered
lawn and garden
equipment
20
CSC/SPC
Council/Strategy and
Policy Committee
(CSC/SPC)
24-28 Paris (France)
PC 287
Chain of custody of
wood and woodbased products
24-28 Shenzen (China)
TC 211
Trondheim
(Norway)
Virtual
(Unknown)
26-28 Frankfurt
(Germany)
28
London (United
Kingdom)
*
*
19-20 Toledo (Spain)
19-23 Copenhagen
(Denmark)
*
JTC 1/SC 35
Information technology/User interfaces
22-23 Cape Town
(South Africa)
*
TC 44/SC 8
Welding and allied
processes/Equipment for gas welding,
cutting and allied
processes
TC 107
Metallic and other
inorganic coatings
25-29 Foshan (China)
25-29 Foshan (China)
**
TC 107/SC 3
Metallic and other
inorganic coatings/
Electrodeposited
coatings and related
finishes
25-29 Foshan (China)
**
TC 107/SC 8
Metallic and other
inorganic coatings/
Chemical conversion
coatings
TC 257
Evaluation of energy
savings
February 2015
Beijing (China)
3-13
London (United
Kingdom)
*
TC 213
Dimensional and
geometrical product
specifications and
verification
Geographic information/
Geomatics
11
Geneva
(Switzerland)
*
CSC/SPC
Council/Strategy and
Policy Committee
(CSC/SPC)
TC 184/SC 1
Automation systems
and integration/Physical device control
22-23 Miami (USA)
*
TMB
Technical Management Board
**
TC 115
Pumps
TC 158
Analysis of gases
St. Petersburg,
Florida (USA)
March 2015
1-4
Copenhagen
(Denmark)
TC 98
Bases for design of
structures
1-5
Dublin (Ireland)
TC 260
Human resource
management
3-5
Tokyo (Japan)
TC 232
Learning services
outside formal
education
Paris (France)
12-16 Weinheim
(Germany)
2-5
December 2014
3-5
January 2015
TC 269
ISO Update, Supplement to ISO Focus -- October 2014
9-13
(Unknown)
**
TC 110/SC 4
Industrial trucks/
Rough-terrain trucks
9-13
Morioka (Japan)
*
TC 223
Societal security
12
West Conshohocken (Philadelphia) (USA)
TC 221
Geosynthetics
COUNCIL
Council
17-18 Geneva
(Switzerland)
*
Railway applications
19
23-27 Vienna (Austria)
Rio de Janeiro
(Brazil)
*
JTC 1/SC 38
Information technology/Distributed
application platforms
and services (DAPS)
**
PC 287
Chain of custody of
wood and woodbased products
*
TC 184
Automation systems
and integration
March-June 2015
25-26 Nara (Japan)
May 2015
1-7
(United
Kingdom)
**
TC 67/SC 4
Materials, equipment
and offshore structures for petroleum,
petrochemical and
natural gas industries/
Drilling and production equipment
4-7
Toronto (Canada)
*
TC 68
Financial services
4-8
Kuching
(Malaysia)
**
JTC 1/SC 27
Information technology/IT Security
techniques
4-8
(Unknown)
**
TC 36
Cinematography
8-15
Tokyo (Japan)
**
TC 10
Technical product
documentation
11-12 Kuching
(Malaysia)
*
JTC 1/SC 27
Information technology/IT Security
techniques
11-15 Ohio (USA)
**
TC 184/SC 5
Automation systems
and integration/Interoperability, integration, and architectures for enterprise
systems and automation applications
March-April 2015
31-2
Montreal
(Canada)
*
TC 20/SC 9
Aircraft and space
vehicles/Air cargo and
ground equipment
1st Quarter 2015
(United
Kingdom)
**
PC 284
Management system
for private security
operations - Requirements with guidance
Paris (France)
*
TC 24/SC 4
Particle characterization including sieving/Particle
characterization
Foshan (China)
**
TC 107/SC 4
Metallic and other
inorganic coatings/
Hot dip coatings
(galvanized, etc.)
11-16 Bologna (Italy)
**
TC 130
Graphic technology
**
TC 156
Metallic and other
inorganic coatings/
Corrosion tests
12-15 London (United
Kingdom)
Corrosion of metals
and alloys
13
Foshan (China)
**
TC 107/SC 7
**
TC 87
Cork
18-22 (Brazil)
Paris (France)
**
JTC 1/SC 40
Information technology/IT Service
Management and IT
Governance
18-22 London (United
Kingdom)
**
TC 4
Rolling bearings
18-22 Chengdu (China)
**
TC 39/SC 2
Machine tools/Test
conditions for metal
cutting machine tools
18-22 Luzern
(Switzerland)
*
TC 114
Horology
22
*
TC 228
Tourism and related
services
26-29 (Argentina)
**
TC 85/SC 5
Nuclear energy,
nuclear technologies, and radiological
protection/Nuclear
fuel cycle
27
London (United
Kingdom)
**
TC 67/SC 5
Materials, equipment
and offshore structures for petroleum,
petrochemical and
natural gas industries/
Casing, tubing and
drill pipe
Glasgow,
Scotland (United
Kingdom)
**
JTC 1/SC 32
Information technology/Data management
and interchange
8-15
Tokyo (Japan)
**
TC 10/SC 1
Technical product
documentation/Basic
conventions
8-15
Tokyo (Japan)
**
TC 10/SC 6
Technical product
documentation/Mechanical engineering
documentation
8-15
Tokyo (Japan)
**
TC 10/SC 10
Technical product
documentation/
Process plant
documentation
April 2015
13-14 Lyon (France)
TC 117
Fans
13-17 Tienjin (China)
**
TC 161
Control and protective devices for gas
and/or oil burners and
appliances
13-17 (Czech Republic)
**
TC 224
Service activities
relating to drinking
water supply systems
and wastewater
systems - Quality
criteria of the service
and performance
indicators
20-24 San Francisco
(USA)
*
TC 215
Health informatics
21-22 (Kazakhstan)
**
TC 67/SC 2
Materials, equipment
and offshore structures for petroleum,
petrochemical and
natural gas industries/
Pipeline transportation systems
23
24
25
20
DГјsseldorf
(Germany)
*
Atlanta (USA)
**
TC 44/SC 11
TC 6/SC 2
Welding and allied
processes/Qualification requirements for
welding and allied
processes personnel
Paper, board and
pulps/Test methods
and quality specifications for paper and
board
Atlanta (USA)
**
TC 6
Paper, board and
pulps
(France)
**
TC 29
Small tools
(France)
**
TC 29/SC 9
Small tools/Tools
with defined cutting
edges, cutting items
(USA)
**
TC 34/SC 15
Food products/Coffee
Cape Town
(South Africa)
ISO Update, Supplement to ISO Focus -- October 2014
Madrid (Spain)
**
TC 23/SC 18
Tractors and machinery for agriculture and
forestry/Irrigation and
drainage equipment
and systems
Tokyo (Japan)
**
TC 113
Hydrometry
Tokyo (Japan)
**
TC 113/SC 1
Hydrometry/Velocity
area methods
Tokyo (Japan)
**
TC 113/SC 2
Hydrometry/Flow
measurement
structures
Tokyo (Japan)
**
TC 113/SC 5
Hydrometry/Instruments, equipment and data
management
Tokyo (Japan)
**
TC 113/SC 6
Hydrometry/Sediment
transport
Tokyo (Japan)
**
TC 113/SC 8
Hydrometry/Ground
water
London (United
Kingdom)
**
TC 131/SC 6
Fluid power systems/
Contamination control
June 2015
(Unknown)
**
TC 268/SC 1
Sustainable development in communities/
Smart community
infrastructures
June-July 2015
30-3
(Cyprus)
**
TC 193
Natural gas
30-3
(Cyprus)
**
TC 193/SC 3
Natural gas/Upstream
area
**
TC 94/SC 13
Personal safety -Protective clothing
and equipment/Protective clothing
2nd Quarter 2015
(Europe)
Istanbul (Turkey)
**
TC 120
Leather
(China)
**
TC 172/SC 7
Optics and photonics/Ophthalmic optics
and instruments
Vico Equense
(Italy)
**
TC 184/SC 4
Automation systems
and integration/Industrial data
London (United
Kingdom)
**
TC 8/SC 8
Ships and marine
technology/Ship
design
(USA)
**
TC 31/SC 9
Tyres, rims and
valves/Valves for tube
and tubeless tyres
Berlin (Germany)
*
TC 91
Surface active agents
(USA)
**
TC 86/SC 6
Refrigeration and
air-conditioning/
Testing and rating of
air-conditioners and
heat pumps
*
TC 206
Fine ceramics
*
JTC 1/SC 35
Information technology/User interfaces
1st Semester 2015
1-5
Sapporo (Japan)
**
TC 42
Photography
1-5
Seattle (USA)
*
TC 43/SC 3
Acoustics/Underwater acoustics
1-6
Philadelphia
(USA)
**
TC 147
Water quality
3-5
(Japan)
**
TC 145
Graphical symbols
July 2015
8-12
Berlin (Germany)
**
TC 121
Anaesthetic and respiratory equipment
1-7
9-12
Pretoria (South
Africa)
**
REMCO
Committee on reference materials
10-11 (France)
**
TC 17/SC 9
Steel/Tinplate and
blackplate
15-19 Vancouver
(Canada)
**
TC 22/SC 13
Road vehicles/Ergonomics applicable to
road vehicles
August 2015
17-18 Geneva
(Switzerland)
*
TMB
Technical Management Board
August-September 2015
18-19 Frankfurt
(Germany)
*
TC 184/SC 2
Automation systems
and integration/
Robots and robotic
devices
September 2015
21-26 Matsue (Japan)
**
TC 37
Terminology and
other language and
content resources
22-25 Avignon (France)
*
TC 54
Essential oils
22-26 (Netherlands)
**
TC 34/SC 9
22-26 (China)
**
22-26 Göteborg
(Sweden)
26-28 Jeju (Korea,
Republic of)
31-4
Hokaido (Japan)
1-6
(Canada)
**
TC 163
Thermal performance
and energy use in the
built environment
1-6
(Canada)
**
TC 205
Building environment
design
Food products/
Microbiology
7-14
Sydney
(Australia)
**
TC 96
Cranes
TC 69
Applications of statistical methods
13-17 Lahaina, Hawaii
(USA)
**
TC 127
Earth-moving
machinery
*
TC 188
Small craft
14-25 Berlin (Germany)
*
TC 213
Matsue (Japan)
**
JTC 1/SC 28
Information technology/Office equipment
Dimensional and
geometrical product
specifications and
verification
(Australia)
**
JTC 1/SC 36
Information technology/Information
technology for learning, education and
training
15-16 Seoul (Korea,
Republic of)
*
TMB
Technical Management Board
16-18 Seoul (Korea,
Republic of)
*
GA
General Assembly
17-18 Moscow (Russian Federation)
**
TC 197
Hydrogen
technologies
19
**
COUNCIL
Council
Zurich
(Switzerland)
**
TC 17/SC 17
Steel/Steel wire rod
and wire products
Beijing (China)
**
TC 46
Information and
documentation
Mexico City
(Mexico)
**
TC 242
Energy Management
ISO Update, Supplement to ISO Focus -- October 2014
Seoul (Korea,
Republic of)
Vienna (Austria)
**
TC 33
Refractories
Paris (France)
**
TC 34/SC 17
Food products/Management systems for
food safety
21
(Japan)
**
TC 133
Clothing sizing systems - size designation, size measurement methods and
digital fittings
Seattle (USA)
**
TC 201/SC 6
Surface chemical analysis/Secondary ion mass
spectrometry
(Netherlands)
**
TC 258
Project, programme
and portfolio
management
**
TC 126/SC 1
Tobacco and tobacco
products/Physical
and dimensional tests
October 2015
15-17 Seattle (USA)
*
TC 201
Surface chemical
analysis
19-23 (Germany)
**
TC 39/SC 2
Machine tools/Test
conditions for metal
cutting machine tools
26-30 New Delhi (India)
28-30 Tsukuba (Japan)
Madrid (Spain)
(Netherlands)
*
JTC 1/SC 27
Information technology/IT Security
techniques
**
TC 202
Microbeam analysis
**
TC 10/SC 8
Technical product documentation/Construction
documentation
**
TC 34/SC 2
Food products/Oleaginous seeds and
fruits and oilseed
meals
Ergonomics/Anthropometry and
biomechanics
(China)
**
TC 282
Water re-use
(Europe)
**
TC 126/SC 2
Tobacco and tobacco products/Leaf
tobacco
(USA)
**
TC 184/SC 4
Automation systems
and integration/Industrial data
Brussels
(Belgium)
**
TC 23
Tractors and machinery for agriculture and
forestry
(Brazil)
**
TC 23/SC 17
Tractors and machinery for agriculture
and forestry/Manually portable forest
machinery
2nd Semester 2015
(USA)
**
TC 27
Solid mineral fuels
(Finland)
**
TC 44
Welding and allied
processes
(France)
**
TC 45
Rubber and rubber
products
Berlin (Germany)
**
TC 138
Plastics pipes, fittings
and valves for the
transport of fluids
(Japan)
**
TC 142
Cleaning equipment
for air and other
gases
(China)
**
TC 155
Nickel and nickel
alloys
**
TC 164
Mechanical testing of
metals
**
TC 34/SC 11
Food products/
Animal and vegetable
fats and oils
(United
Kingdom)
(Austria)
**
TC 190
Soil quality
Nairobi (Kenya)
**
TC 38
Textiles
(China)
**
TC 274
Light and lighting
Nairobi (Kenya)
**
TC 38/SC 1
Textiles/Tests for
coloured textiles and
colorants
January 2016
**
TC 120
Leather
Textiles/Cleansing,
finishing and water
resistance tests
February 2016
**
TC 213
Dimensional and
geometrical product
specifications and
verification
Seoul (Korea,
Republic of)
**
TC 161
Control and protective devices for gas
and/or oil burners and
appliances
(Australia)
**
TC 178
Lifts, escalators and
moving walks
(Brazil)
**
TC 67/SC 4
Materials, equipment
and offshore structures for petroleum,
petrochemical and
natural gas industries/
Drilling and production equipment
(India)
**
TC 85
Nuclear energy,
nuclear technologies, and radiological
protection
**
TC 38/SC 2
Nairobi (Kenya)
**
TC 38/SC 23
Textiles/Fibres and
yarns
Nairobi (Kenya)
**
TC 38/SC 24
Textiles/Conditioning atmospheres and
physical tests for
textile fabrics
Sao Paulo
(Brazil)
**
TC 58/SC 2
Gas cylinders/Cylinder fittings
Madrid (Spain)
**
TC 59/SC 16
Buildings and civil
engineering works/
Accessibility and
usability of the built
environment
(USA)
**
TC 92
Fire safety
Santiago (Chile)
**
TC 195
Building construction machinery and
equipment
November 2015
(Spain)
**
TC 189
Ceramic tile
(China)
**
JTC 1
Information
technology
4th Quarter 2015
22
TC 159/SC 3
(Netherlands)
Nairobi (Kenya)
9-12
**
Month unknown 2015
2nd-3rd Quarter 2015
(Europe)
Dayton, Ohio
(USA)
(China)
(USA)
April 2016
May 2016
June 2016
ISO Update, Supplement to ISO Focus -- October 2014
(Germany)
**
JTC 1/SC 36
Information technology/Information
technology for learning, education and
training
**
TC 34/SC 16
Food products/Horizontal methods for
molecular biomarker
analysis
**
TC 201
Surface chemical
analysis
**
JTC 1
Information
technology
(Korea, Republic of)
**
JTC 1/SC 23
Information technology/Digitally Recorded
Media for Information Interchange and
Storage
(Russian
Federation)
**
REMCO
Committee on reference materials
(Denmark)
**
TC 37
Terminology and
other language and
content resources
(Australia)
**
TC 44
Welding and allied
processes
(Malaysia)
**
TC 45
Rubber and rubber
products
Wellington (New
Zealand)
**
TC 46
Information and
documentation
(Sweden)
**
TC 102
Iron ore and direct
reduced iron
(China)
**
TC 138/SC 2
Plastics pipes, fittings
and valves for the
transport of fluids/
Plastics pipes and
fittings for water
supplies
**
JTC 1/SC 36
Information technology/Information
technology for learning, education and
training
**
JTC 1/SC 36
Information technology/Information
technology for learning, education and
training
1st Semester 2016
(China)
October 2016
(Korea, Republic of)
November 2016
(Norway)
Month unknown 2016
June 2017
(Australia)
June 2018
(Korea, Dem. P.
Rep. of)
ISO Update, Supplement to ISO Focus -- October 2014
23

Document 3177474

ISO/TS 22003:2013 – changes to the new version

How to Install and Use SSS\Progman with Carsoft or INPA interface

jomo kenyatta university of agriculture and technology mombasa

Download free - OGP

231 kB

ISO Update, November 2014

#09 - A how-to guide for Trial Summary 3.1.3x - PhUSE Wiki

How to Write Technical Reports: Understandable Structure - Yimg

Net Developers - C# .Net TDD/SOA/Microservices Location

How to install GT1\EasyDIS v44 step-by-step - scchosting.com

How to help your son / daughter revise in History - Gordano School

THE KENYA GAZETTE - Kenya Law Reports

TA 5: Guide: How to Share and Exchange Geospatial Data

sites how to find us location contact us customers JRD Pressings

Erasmus Course on Magnetic Resonance Image. EMRI.

Phonak Audéo V-312 (V90/V70/V50/V30) (xS)