UniGroupВ® Too
Includes UniGroupВ® and PLACESВ®
North America
UniGroup Too Price List — April 2008
This Haworth North American price book contains US list prices.
Canadian customers can convert the US list price into their Canadian equivalent by going to
www.Haworth.com/Canada to find the current Canadian multipliers. These multiplier factors
allow you to convert the US list price into a Canadian list price.
UniGroup Too Price List
Table of Contents
950 Series
Attached Base Conversion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . 353
Attached Conversion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 353
Attached Drawer Pedestal — File/File . . . . . . . . . . . . . . . . . . . 347
Attached Drawer Pedestal — Pencil/Box/EDP . . . . . . . . . . . . 348
Attached Pedestal — Box/Box/Box/Box . . . . . . . . . . . . . . . . . . 347
Attached Pedestal — Box/Box/File . . . . . . . . . . . . . . . . . . . . . . 346
Attached Pedestal — Box/Box/File — Wood Front . . . . . . . . 338
Attached Pedestal — File/File — Wood Front . . . . . . . . . . . . 338
Attached Pedestal — Pencil/Pencil/Box/File . . . . . . . . . . . . . . 346
Compressor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 364
Counterweight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 341, 355, 365
Dividers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 364
Five-High . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361
Four-High . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 360
Freestanding Base Conversion Kit . . . . . . . . . . . . . . . . . . 341, 355
Freestanding Conversion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 353
Freestanding Pedestal — Box/Box/File . . . . . . . . . . . . . . . . . . 351
Freestanding Pedestal — Box/Box/File — Wood Top and
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340
Freestanding Pedestal — File/File . . . . . . . . . . . . . . . . . . . . . . . 352
Freestanding Pedestal — File/File — Wood Top and
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340
Freestanding Pedestal —Pencil/Box/EDP . . . . . . . . . . . . . . . . 352
Freestanding Pedestal — Pencil/Box/File . . . . . . . . . . . . . . . . 351
Freestanding Pedestal — Pencil/Box/File — Wood Top
and Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340
Freestanding Pedestal — Pencil/Pencil/Box/File . . . . . . . . . . 351
Front-to-Back Hanging Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . 365
Heavy Loading Counterweight . . . . . . . . . . . . . . . . . . . . . 341, 355
Hinged Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 357, 358
Lateral File Lockbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 365
Mobile Caster Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 341, 355
Mobile Conversion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 354
Mobile Pedestal — Box/Box/File . . . . . . . . . . . . . . . . . . . . . . . . 349
Mobile Pedestal — Box/Box/File — Wood Top and Front . . 339
Mobile Pedestal — File/File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350
Mobile Pedestal — File/File — Wood Top and Front . . . . . . 339
Mobile Pedestal — Pencil/Box/EDP . . . . . . . . . . . . . . . . . . . . . 350
Mobile Pedestal — Pencil/Box/File . . . . . . . . . . . . . . . . . . . . . . 349
Mobile Pedestal — Pencil/Box/File — Wood Top and
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339
Mobile Pedestal — Pencil/Pencil/Box/File . . . . . . . . . . . . . . . . 349
Pedestal Drawer Lock Conversion Kit . . . . . . . . . . . . . . . . . . . 356
Pencil Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 356
Reference Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 356
Side Bookcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 357, 358
Side-to-Side 6′′(152mm) Drawer Divider . . . . . . . . . . . . . . . . . 356
Side-to-Side Hanging Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 364
Single Top, Laminate Surface — Radius or Square Edge . . 363
Single Top, Wood Surface with Wood Trim — Radius or
Square Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 363
Stationery Organizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 356
Stationery Organizer Divider . . . . . . . . . . . . . . . . . . . . . . . . . . . . 356
Suspended Pedestal — Box/Box/Box . . . . . . . . . . . . . . . . . . . . 342
Suspended Pedestal — Box/Box/Box — Wood Front . . . . . 336
Suspended Pedestal — Box/Box/File . . . . . . . . . . . . . . . . . . . . 344
Suspended Pedestal — Box/Box/File — Wood Front . . . . . . 337
Suspended Pedestal — Box/File . . . . . . . . . . . . . . . . . . . . . . . . 342
Suspended Pedestal — Box/File — Wood Front . . . . . . . . . . 336
Suspended Pedestal — File/File . . . . . . . . . . . . . . . . . . . . . . . . 344
Suspended Pedestal — File/File — Wood Front . . . . . . . . . . 337
Suspended Pedestal — Pencil/Box/EDP . . . . . . . . . . . . . . . . . 345
Suspended Pedestal — Pencil/Box/File . . . . . . . . . . . . . . . . . . 343
Suspended Pedestal — Pencil/Box/File — Wood Front . . . . 336
Suspended Pedestal — Pencil/Pencil/Box/File . . . . . . . . . . . 343
Translucent Tower Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358
Three-High . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 360
Two-High . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 359, 362
Two-High With Counterweight . . . . . . . . . . . . . . . . . . . . . . 359, 362
Adaptable Upper Storage
Corner Mini Shelf, Standard Mount . . . . . . . . . . . . . . . . . . . . . .
Open Shelf, Standard Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overhead Storage Unit / Shelf Gang Clip . . . . . . . . . . . . . . . .
Overhead Storage Unit, Standard Mount — Painted,
Translucent or Wood Front . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overhead Storage Unit, Up Mount — Painted, Translucent
or Wood Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Straight Mini Shelf, Standard Mount . . . . . . . . . . . . . . . . . . . . .
267
264
264
265
266
267
Adaptable Wall Mount Components
Back for Wall Mounted Overhead Storage Unit . . . . . . . . . . .
Tackboard Wall Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wall Mounted Overhead Storage Unit, Painted or Wood
Fronts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Worksurface/Worksurface Support Panel to Wall Bracket . .
275
275
274
275
Adaptable Worksurfaces — Laminate
90В° Merger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
120В° Link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Conference End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Corner, 90В° Angled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Corner, 90В° Angled Transitional . . . . . . . . . . . . . . . . . . . . . . . . .
Corner, 90В° Notched . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Corner, 90В° Notched Extended . . . . . . . . . . . . . . . . . . . . . . . . . .
Corner, 90В° Notched Transitional . . . . . . . . . . . . . . . . . . . . . . . .
Corner, 90В° Split Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Corner, 90В° Straight Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Corner, 90В° Wrap-Around . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Corner, 90В° Wrap-Around Extended . . . . . . . . . . . . . . . . . . . . .
Corner, 90В° Wrap-Around Transitional . . . . . . . . . . . . . . . . . . .
Corner, 90В° Wrap-Around Transitional Extended . . . . . . . . . .
Corner, 120В° Wrap-Around . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Countertop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D-Shaped Convergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D-Shaped Convergent, Wrap-Around . . . . . . . . . . . . . . . . . . . .
D-Shaped Ender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Key Conference End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rectangular . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rectangular Convergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rectangular Inverse Swell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rectangular Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rectangular Radius End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rectangular — Split Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rectangular Swell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rectangular Transition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wedge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
199
211
207
209
187
190
186
194
189
191
184
185
192
188
196
200
208
201
204
206
210
174
202
179
177
182
183
178
180
181
Adaptable Worksurfaces — Wood
90В° Merger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
120В° Link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Conference End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Corner, 90В° Angled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Corner, 90В° Angled Transitional . . . . . . . . . . . . . . . . . . . . . . . . .
Corner, 90В° Notched . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Corner, 90В° Notched Extended . . . . . . . . . . . . . . . . . . . . . . . . . .
Corner, 90В° Notched Transitional . . . . . . . . . . . . . . . . . . . . . . . .
Corner, 90В° Split Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Corner, 90В° Straight Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Corner, 90В° Wrap-Around . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Corner, 90В° Wrap-Around Extended . . . . . . . . . . . . . . . . . . . . .
Corner, 90В° Wrap-Around Transitional . . . . . . . . . . . . . . . . . . .
Corner, 90В° Wrap-Around Transitional Extended . . . . . . . . . .
236
246
242
244
225
228
224
232
227
229
222
223
230
226
234
April 2008 / USA
3
UniGroup Too Price List
Table of Contents
Corner, 120В° Wrap-Around . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Countertop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D-Shaped Convergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D-Shaped Convergent, Wrap-Around . . . . . . . . . . . . . . . . . . . .
D-Shaped Ender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Key Conference End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rectangular . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rectangular Convergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rectangular Inverse Swell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rectangular Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rectangular Radius End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rectangular — Split Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rectangular Swell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rectangular Transition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wedge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
237
243
238
240
241
245
212
239
217
215
220
221
216
218
219
Clerestory Kits
2-Way Connector Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-Way Connector Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-Way Connector Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
End Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Straight Track Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
145
145
145
145
145
Electrical and Cable Management
Base Feed Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Base Feed Module — Concealed Flatwire Connection —
3-Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Base Feed Module — Concealed Hardwire Connection —
3-Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Base Feed Module — Concealed Hardwire Connection —
6-Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Base Feed Module — Hardwire Connection — 6-Circuit . . . 157
Base Raceway End Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Chicago Ported Panel Cover Plates . . . . . . . . . . . . . . . . . . . . . 169
Communication Junction Box . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Connector Assembly — 12′′ Pass-Through . . . . . . . . . . . . . . 163
Desktop Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Dual Power Access Raceway Kit — 4′′-High Base
Raceway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Expanded Top Cap Raceway . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Expanded Top Finish Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Extended Power Connector — Long Width . . . . . . . . . . . . . . . 164
Extended Power Connector — Medium Width . . . . . . . . . . . . 164
Extended Power Connector — Short Width . . . . . . . . . . . . . . 164
Flexible Power Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Flip Top Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
PLACES Cable Management Pole — For 10′(3048mm)-High
Ceiling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
PLACES Cable Management Pole — For 12′(3658mm)-High
Ceiling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
PLACES Cable Management Pole — Panel Height . . . . . . . 153
PLACES Cable Management Post — Variable Height —
In-Line — Fabric or Painted Surface . . . . . . . . . . . . . . . . . . . 155
PLACES Cable Management Post — Variable Height —
Three-Way 90° — Fabric or Painted Surface . . . . . . . . . . . 155
PLACES Cable Management Post — Variable Height —
Three-Way 180° — Fabric or Painted Surface . . . . . . . . . . 155
PLACES Cable Management Post — Variable Height —
Two-Way 90° — Fabric or Painted Surface . . . . . . . . . . . . . 155
PLACES Top Feed Module — 3-Circuit 10′ Ceiling Height . 150
PLACES Top Feed Module — 3-Circuit 12′ Ceiling Height . 150
PLACES Top Feed Module — 6-Circuit 10′ Ceiling Height . 151
Ported Panel Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Ported Raceway Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Power Breaker Marker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
Power Receptacle — Duplex . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Power Receptacle — Isolated Ground Duplex . . . . . . . . . . . . 161
Power Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
4
April 2008 / USA
Power/Data Dome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Raceway Retrofit Kits — 3-Circuit . . . . . . . . . . . . . . . . . . . . . . . 159
Raceway Retrofit Kits — Powered — 6-Circuit . . . . . . . . . . . . 159
Straight-Span Power Connector . . . . . . . . . . . . . . . . . . . . . . . . . 163
UniGroup Too Top Feed Module — 3-Circuit 10′ Ceiling
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
UniGroup Too Top Feed Module — 3-Circuit 12′ Ceiling
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
UniGroup Too Top Feed Module — 6-Circuit 10′ Ceiling
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
UniGroup Too, UniGroup and PLACES Base Feed Module
(Canada) — Plug Connection — 1-Circuit . . . . . . . . . . . . . . 156
UniGroup Too, UniGroup and PLACES Base Feed Module —
Hardwire Connection — 3-Circuit . . . . . . . . . . . . . . . . . . . . . . 156
UniGroup Too, UniGroup and PLACES Base Feed Module —
Plug Connection — 1-Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . 156
UniGroup Too, UniGroup and PLACES Raised Floor Base
Feed Module — 3-Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
UniGroup Too, UniGroup, PLACES Chicago Hardwire /
International Top Feed Module . . . . . . . . . . . . . . . . . . . . . . . . 162
UniGroup Too/UniGroup Cable Management Pole —
One Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
UniGroup Too/UniGroup Cable Management Pole —
Two Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
UniGroup Top Feed Module — 3-Circuit 10′ Ceiling
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
UniGroup Top Feed Module — 3-Circuit 12′ Ceiling
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
UniGroup Top Feed Module — 6-Circuit 10′ Ceiling
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Vertical Wire Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Vertical Wire Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Worksurface Grommet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Jump Stuff
Binder Bin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281
File Master Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284, 289
Freestanding Mount Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
Gooseneck Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281
Letter Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
Letter Tray Stacking Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
Letter Tray Stacking Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
Mini Master Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284, 290
Mini Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281
Panel Mount Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286
Paper Sorter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282, 288
Personal Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282, 288
Personal Shelf Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
Phone Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282, 288
Phone Shelf Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282
Pile Master Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288
Tack Strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281
Task Master Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284, 289
Team Master Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289
Tool Cup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
Tote Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
Wall Mount Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287
Waste Bin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
Worksurface Mount Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286
Tote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281
Lighting
Adaptable Electronic Ballast Task Light . . . . . . . . . . . . . 276, 295
Adaptable Electronic Ballast Task Light (Add-On Light) . . . . 277
Adaptable Electronic Ballast Task Light (Starter Light) . . . . . 277
Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297
Grid-Mount Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
Grid-Mounted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297
UniGroup Too Price List
Table of Contents
BRAZOв„ў . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Panel-Hung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Panel-Hung Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wing Light — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wing Light — Panel Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wing Light — Rail Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wing Light — Under Shelf Mount . . . . . . . . . . . . . . . . . . . . . . .
295
297
298
296
296
296
296
Markerboards/Wall Accessory Slat Pad
Markerboard — Magnetic Surface . . . . . . . . . . . . . . . . . . . . . . . 280
Markerboard — Non-Magnetic Surface . . . . . . . . . . . . . . . . . . 280
Wall Accessory Slat Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280
Mini Shelves
Corner Mini-Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268
Straight Mini-Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268
OneTouch Overhead Storage Unit
OneTouch Gang Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269
Overhead Storage Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269
Panel Accessories – Retrofit Kits
90° Full-Height Finish Post — Square Painted Top Cap . 40, 45
90° Variable-Height Finish Post — Square Painted Top
Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40, 45
120° Full-Height Finish Post — Square Painted Top
Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41, 46
120° Variable-Height Finish Post — Square Painted Top
Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41, 46
180° Full-Height Finish Post — Square Painted Top
Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 47
180° Variable-Height Finish Post — Square Painted Top
Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43, 48
Square Painted Top Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39, 44
Trim Strip for UniGroup Fabric and Glazed Add-On Panels . 39
PLACES Panels & Connectors
2/90 Sign Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
90° Finish Post — Low Profile Steel Top Cap — Fabric
Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
90° Finish Post — Low Profile Steel Top Cap — Painted
Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
90° Finish Post — Low Profile Wood Top Cap — Fabric
Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
90° Finish Post — Low Profile Wood Top Cap — Wood
Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
90В° Low Profile Wood Top Cap for 2-Way . . . . . . . . . . . . . . . . 139
90В° Low Profile Wood Top Cap for 4-Way . . . . . . . . . . . . . . . . 139
90° Power Connector Cover — Radius Profile . . . . . . . . . . . . 134
120° Finish Post — Low Profile Steel Top Cap — Fabric
Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
180° Finish Post — Low Profile Steel Top Cap— Fabric
Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
180° Finish Post — Low Profile Steel Top Cap— Painted
Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
180° Finish Post — Low Profile Wood Top Cap — Fabric
Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
180° Finish Post — Low Profile Wood Top Cap — Wood
Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
180В° Low Profile Wood Top Cap for 3-Way . . . . . . . . . . . . . . . 139
180В° Power Connector Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
All-Purpose Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
All-Purpose Hook — For Low Profile Wood Top Cap
Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Basic Monolithic Fabric Panel with Low Profile Steel Top
Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Basic Monolithic Fabric Panel with Low Profile Wood Top
Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
End-of-Run Finish Post — Low Profile Steel Top Cap —
Fabric Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
End-of-Run Finish Post — Low Profile Wood Top Cap —
Fabric Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
End-of-Run Finish Post — Low Profile Wood Top Cap —
Wood Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
End-of-Run Finish Post — Wood Top Cap . . . . . . . . . . . . . . . 140
End-of-Run Variable Height Finish Post — Coped — Low
Profile Wood Top Cap — Fabric Surface . . . . . . . . . . . . . . . 137
End-of-Run Variable Height Finish Post — Coped — Low
Profile Wood Top Cap — Wood Surface . . . . . . . . . . . . . . . 137
End-of-Run Variable Height Finish Post — Regular — Low
Profile Wood Top Cap — Fabric Surface . . . . . . . . . . . . . . . 138
End-of-Run Variable Height Finish Post — Regular — Low
Profile Wood Top Cap — Wood Surface . . . . . . . . . . . . . . . 138
Friction Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Full Height Side Trim Rail – for use with Add-On Panels . . . 141
Glazed Monolithic Panel with Low Profile Wood Top Cap . . 102
Glazed Monolithic Panels with Low Profile Steel Top Cap . 122
High-Performance Monolithic Fabric Panel/Low Profile Steel
Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
if Panel Attached Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
In-Line Low Profile Wood Top Cap . . . . . . . . . . . . . . . . . . . . . . 139
Low Profile Steel Top Cap for 3-Way and 4-Way . . . . . . . . . 140
Low Profile Wood Top Cap Kit . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Monolithic Fabric Add-On Panel . . . . . . . . . . . . . . . . . . . . . . . . . 124
Monolithic Fabric Panel with Low Profile Steel Top Cap . . . 106
Monolithic Fabric Panel with Low Profile Wood Top Cap . . . . 88
Monolithic Glazed Add-On Panel . . . . . . . . . . . . . . . . . . . . . . . . 126
Monolithic Wood Panel with Low Profile Wood Top Cap . . . . 82
Monolithic Wood/Fabric Panel with Low Profile Wood Top
Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Muntin Kit — Classic — Painted . . . . . . . . . . . . . . . . . . . . . . . . 131
Muntin Kit — Horizontal — Painted . . . . . . . . . . . . . . . . . . . . . . 131
Open Frame Monolithic Panel with Low Profile Steel Top
Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Open Frame Monolithic Panel with Low Profile Wood Top
Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Panel Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Ported Monolithic Fabric Panel with Low Profile Steel Top
Cap — Four Ports, Two Each Side . . . . . . . . . . . . . . . . . . . . 118
Ported Monolithic Fabric Panel with Low Profile Steel Top
Cap — One Port Each Side . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Ported Monolithic Fabric Panel with Low Profile Steel Top
Cap — One Port Right or Left . . . . . . . . . . . . . . . . . . . . . . . . . 112
Ported Monolithic Fabric Panel with Low Profile Steel Top
Cap — Two Ports, Same Side . . . . . . . . . . . . . . . . . . . . . . . . 116
Ported Monolithic Fabric Panel with Low Profile Wood Top
Cap — Four Ports, Two Each Side . . . . . . . . . . . . . . . . . . . . . 98
Ported Monolithic Fabric Panel with Low Profile Wood Top
Cap — One Port Each Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Ported Monolithic Fabric Panel with Low Profile Wood Top
Cap — One Port Right or Left . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Ported Monolithic Fabric Panel with Low Profile Wood Top
Cap — Two Ports, Same Side . . . . . . . . . . . . . . . . . . . . . . . . . 96
Seismic Anchoring Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Side Trim Rail With Notch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Single Door — Glazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Single Door — Glazed with Classic Muntins . . . . . . . . . . . . . . 129
Single Door — Glazed with Horizontal Muntins . . . . . . . . . . . 129
Single Door — Laminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Single Door — Wood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
T-Mount Kit — Center and End Conditions . . . . . . . . . . . . . . . 142
Wainscot Kit Painted Rail — Fabric Panel . . . . . . . . . . . . . . . . 132
Wainscot with Classic Muntins Painted — Rail and
Muntins — Fabric Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
April 2008 / USA
5
UniGroup Too Price List
Table of Contents
Wainscot with Horizontal Muntins — Painted Rail and
Muntins — Fabric Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Wall Mount Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Wall Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
PLACES Shelves/Flipper Doors/Overhead Storage
Low Shelf — Painted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Regular Flipper Door Front — Fabric or Laminate . . . . . . . . .
Regular Overhead — Painted Case — Wood Door Front —
Wood Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Regular Shelf — Painted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
271
272
272
271
Shelf Accessories
Adaptable/OneTouch Shelf Dividers . . . . . . . . . . . . . . . . . . . . .
UniGroup/PLACES Shelf Back Guard . . . . . . . . . . . . . . . . . . .
UniGroup/PLACES Shelf Dividers . . . . . . . . . . . . . . . . . . . . . . .
Wall Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
273
273
273
273
Tables
Laminate C-Leg Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 367
Laminate Oval Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 366
Laminate Rectangular Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . 366
Laminate Round Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 366
Laminate Square Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 366
Sit-to-Stand Corner — Laminate — T-Mold Edge . . . . 368, 370
Sit-to-Stand Curved Corner — Laminate — T-Mold
Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 369, 371
Sit-to-Stand Rectangular — Laminate — T-Mold
Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 368, 370
Sit-to-Stand Split Corner — Laminate — T-Mold
Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 369, 371
Tack Strips/Tackboards
Tack Strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tack Strip — Monolithic High-Performance Acoustical
Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tackboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tackboard — Monolithic High-Performance Acoustical
Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
278
279
278
279
Task Organization
Diagonal Unit — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . .
Diagonal Unit — Suspended . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Horizontal Unit — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . .
Horizontal Unit — Suspended . . . . . . . . . . . . . . . . . . . . . . . . . . .
Paper Management Mounting Bar . . . . . . . . . . . . . . . . . . . . . . .
Paper Management Tray Packages . . . . . . . . . . . . . . . . . . . . .
Vertical Unit — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . .
Vertical Unit — Suspended . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
293
293
294
293
293
294
294
294
UniGroup Panels & Connectors
2/90 Sign Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
90° Finish Post — Radius Steel Top Cap— Fabric Surface .
90° Finish Post — Radius Steel Top Cap— Painted
Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
90° Finish Post — Radius Wood Top Cap— Fabric Surface .
90° Power Connector Cover — Radius Profile . . . . . . . . . . . . .
90° Top Cap for 2-Way and 3-Way — Radius Wood Top
Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
90° Top Cap for Radius Wood Top Cap — Wood Surface . .
120° Finish Post — Radius Steel Top Cap — Fabric
Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
180° Finish Post — Radius Steel Top Cap — Fabric
Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
180° Finish Post — Radius Steel Top Cap — Painted
Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
180° Finish Post — Radius Wood Top Cap — Fabric
Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
April 2008 / USA
80
73
73
73
73
77
77
74
75
75
75
180В° Power Connector Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
All-Purpose Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Basic Monolithic Panel with Radius Steel Top Cap . . . . . . . . . 56
End-of-Run Finish Post — Radius Wood Top Cap — Wood
Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
End-of-Run — Variable Height Finish Post Coped End —
Radius Wood Top Cap — Wood Surface . . . . . . . . . . . . . . . . 76
Friction Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Full-Height Side Trim Rails — for use with Add-On Panels . . 78
Glazed Monolithic Panel with Radius Steel Top Cap . . . . . . . 62
Glazed Monolithic Panel with Radius Wood Top Cap . . . . . . . 52
Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
if Panel Attached Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Laminate Monolithic Panel with Radius Steel Top Cap . . . . . 58
Monolithic Fabric Add-On Panel . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Monolithic Glazed Add-On Panel . . . . . . . . . . . . . . . . . . . . . . . . . 66
Monolithic Panel with Radius Steel Top Cap . . . . . . . . . . . . . . . 54
Monolithic Panel with Radius Wood Top Cap . . . . . . . . . . . . . . 50
Open Frame Panel with Radius Steel Top Cap . . . . . . . . . . . . 60
Painted Muntin Kit — Classic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Painted Muntin Kit — Horizontal . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Pre-hinged Side Trim Rails — Angled or Straight-Line
Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Radius Steel Top Cap for 3-Way and 4-Way . . . . . . . . . . . . . . 77
Radius Wood Top Cap Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Seismic Anchoring Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Side Trim Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Single Door — Glazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Single Door — Glazed with Classic Muntins . . . . . . . . . . . . . . . 69
Single Door — Glazed with Horizontal Muntins . . . . . . . . . . . 129
Single Door — Laminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Single Door with ADA Lever and Kick Plate — Laminate . . . 68
T-Mount Kit — Center and End Conditions . . . . . . . . . . . . . . . . 79
Wainscot Kit Painted Rail — Fabric Panel . . . . . . . . . . . . . . . . . 72
Wainscot with Classic Muntins Painted — Rail and Muntins —
Fabric Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Wainscot with Horizontal Muntins — Painted Rail and
Muntins — Fabric Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Wall Mount Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Wall Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
UniGroup Shelves and Flipper Doors
Low Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270
Regular Flipper Door Front — Fabric or Laminate Door
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270
Regular Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270
UniGroup Too Panels & Connectors
2/90 Sign Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
90° Full-Height Finish Post — Square Painted Top Cap . . . .
90° Power Connector Cover — Square Profile . . . . . . . . . . . . .
90В° Square Painted Top Cap for 2-Way, 3-Way, 4-Way . . . .
90° Variable-Height Finish Post — Square Painted Top
Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
120° Full-Height Finish Post — Square Painted Top Cap . . .
120В° Power Connector Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . .
120В° Square Painted Top Cap for 2-Way or 3-Way . . . . . . . . .
120° Variable-Height Finish Post — Square Painted Top
Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
180° Full-Height Finish Post — Square Painted Top Cap . . .
180В° Power Connector Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . .
180° Variable-Height Finish Post — Square Painted Top
Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
180В° Vertical Cover only, (no top cap or base raceway
cover) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Base Raceway End Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Basic Monolithic Panel with Square Painted Top Cap . . . . . .
Coat Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
38
30
30
33
30
31
31
34
31
32
33
32
33
35
10
38
UniGroup Too Price List
Table of Contents
Friction Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Full Height Side Trim Rail — for use with Add-On Panels . . .
Glazed Add-On Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Glazed Monolithic Panel with Square Painted Top Cap . . . . .
Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
if Panel Attached Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Laminate Monolithic Panel with Square Painted Top Cap . .
Monolithic Fabric Add-On Panel . . . . . . . . . . . . . . . . . . . . . . . . . .
Monolithic Panel Core with Square Painted Top Cap —
without Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Monolithic Panel with Full-Height Inserts and Square Painted
Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Monolithic Panel with Segmented Inserts and Square Painted
Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Seismic Anchoring Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Side Trim Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Single Base Insert — Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Single Door — Laminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Single Upper Inserts — Fabric or Markerboard . . . . . . . . . . . .
T-Mount Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
UniGroup Too Top Cap Aligner . . . . . . . . . . . . . . . . . . . . . . . . . .
UniGroup Too Top Cap End Plug . . . . . . . . . . . . . . . . . . . . . . . .
Wall Mount Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wall Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
38
36
27
24
37
29
12
26
18
14
16
38
36
20
28
22
38
35
35
37
37
V Series
Box/Box/File – Attached . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Box/Box/File – Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Box/Box/File – Suspended . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Box/File – Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Box/File – Suspended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
File/File – Attached . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
File/File – Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
File/File – Suspended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Five-High — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Four-High — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Legal Filing Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Three-High — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Two-High — Attached . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Two-High — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
331
332
331
332
331
331
332
331
334
334
332
334
333
334
Wire Grid System and Accessories
Diskette Bin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Grid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Grid Tackstrip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mailbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Multi-Purpose Storage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reference Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
292
291
292
291
292
291
Worksurface Accessories
Adjustable Keyboard Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjustable Keyboard Pad — Fixed Height . . . . . . . . . . . . . . . .
Adjustable Keyboard Pad with Swivel Mouse Pad . . . . . . . .
Adjustable Keyboard Pad with Tilt . . . . . . . . . . . . . . . . . . . . . . .
Boogie Board Keyboard Tray with Palm Rest . . . . . . . . . . . . .
Boogie Board Keyboard Tray with Palm Rest and
Integrated Mouse Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Boogie Board Mouse Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Double Support Leg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dual-Leg Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Extended Tilting Keyboard Pad . . . . . . . . . . . . . . . . . . . . . . . . .
Horizontal Wire Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Make-A-Corner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Modesty Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Monitor Arm в€’ Dual or Triple . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Monitor Arm в€’ Single . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mouse Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mouse Pad with Horizontal Adjustment . . . . . . . . . . . . . . . . . .
260
261
259
260
258
258
258
253
253
260
254
254
253
263
263
262
262
Mouse Pad with Horizontal and Height Adjustment . . . . . . . .
Palm Rest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pencil + Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pencil Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Shallow Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Single Support Leg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Steel Center Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Support Post . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wire Management Loop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wood Center Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Worksurface Grommet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Worksurface Reinforcement Channel . . . . . . . . . . . . . . . . . . . .
262
261
257
257
257
253
257
253
254
257
254
255
Worksurface Supports
Adjustable Height Disc Base . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Convergent Mount Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Counter Top Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flush Mount Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pedestal-to-Panel Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear-Corner Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Side Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Standard Cantilever Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Standard Link Cantilever Bracket . . . . . . . . . . . . . . . . . . . . . . .
Standard Mini Cantilever Bracket . . . . . . . . . . . . . . . . . . . . . . .
Standard Snap-n-Fit Cantilever Bracket for Corner
Worksurface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Standard Snap-n-Fit Cantilever Bracket for Rectangular
Worksurfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Standard Snap-n-Fit Mini Cantilever Bracket . . . . . . . . . . . . .
Standard Snap-n-Fit Mini Cantilever Bracket for Corner
Worksurface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Straight Leg Basic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Straight Leg Basic with Caster . . . . . . . . . . . . . . . . . . . . . . . . . .
Support Column . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Worksurface Support Panel — Laminate . . . . . . . . . . . . . . . . .
Worksurface Support Panel — Wood . . . . . . . . . . . . . . . . . . . .
252
250
250
250
251
250
250
247
247
247
249
248
248
249
252
252
252
251
251
X Series
Bookcase Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
Box/File — Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301
Box/File — Suspended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
Box/Box/File — Attached . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299
Box/Box/File — Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301
Box/Box/File — Suspended . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
CD Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302
Compressor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309
Counterweight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309
Dividers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302, 309
File/File — Attached . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299
File/File — Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301
File/File — Suspended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300
Five-High Bookcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
Five-High Lateral File Painted, Painted Perforated or Wood
Drawer Fronts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 307
Five-High Lateral File Painted, Painted Perforated or Wood
Drawer Fronts — with Swing Doors . . . . . . . . . . . . . . . . . . . 308
Five-High with Bookcase Upper Storage . . . . . . . . . . . . . . . . . 317
Five-High with Bookcase Upper Storage — Translucent
Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 318
Five-High with Hinged Door Upper Storage . . . . . . . . . . . . . . 313
Five-High with Hinged Door Upper Storage — Translucent
Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315
Four-High Bookcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330
Four-High Combination — Freestanding . . . . . . . . . . . . 325, 326
Four-High Combination — Translucent Doors . . . . . . . . . . . . 327
Four-High Lateral File Painted, Painted Perforated or Wood
Drawer Fronts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306
Four-High with Bookcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316
April 2008 / USA
7
UniGroup Too Price List
Table of Contents
Four-High with Bookcase — Translucent Door . . . . . . . . . . . 312
Four-High with Hinged Door Upper Storage . . . . . . . . . . . . . . 310
Four-High with Hinged Door Upper Storage — Translucent
Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311
Front-to-Back Hanging Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309
Pedestal Cushion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302
Pencil Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302
Side-to-Side Hanging Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309
Six-High with Bookcase Upper Storage — Translucent
Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 318
Stationary Pedestal Conversion Kit . . . . . . . . . . . . . . . . . . . . . . 302
Storage Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328
Storage Shelves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328
Three-High Bookcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329
Three-High Combination — Freestanding . . . . . . . . . . . . . . . . 323
Three-High Combination — Translucent Doors . . . . . . . . . . . 324
Three-High Lateral File Painted, Painted Perforated or
Wood Drawer Fronts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
Two-High Bookcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329
Two-High Combination — Attached . . . . . . . . . . . . . . . . . 319, 320
Two-High Combination — Freestanding . . . . . . . . . . . . . 321, 322
Two-High Lateral File Painted, Painted Perforated or Wood
Drawer Fronts — Attached . . . . . . . . . . . . . . . . . . . . . . . . . . . 303
Two-High Lateral File Painted, Painted Perforated or Wood
Drawer Fronts — Freestanding . . . . . . . . . . . . . . . . . . . . . . . 304
Worksurface Height Adjustment Kit for Attached
Combination Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328
Worksurface Height Adjustment Kit for Attached Pedestal . 302
Finishes and Fabrics
Finish/Color Legend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .374-375
Seating Fabric/Color Legend. . . . . . . . . . . . . . . . . . . . . . . . . .378-379
Systems Fabrics/Color Legend. . . . . . . . . . . . . . . . . . . . . . . .376-377
Wood Finish Legend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .373
Terms of Sale
North America . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .380-383
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .384-398
Lifetime Product Warranty. . . . . . . . . . . . .Inside Back Cover
8
April 2008 / USA
UniGroup Too Price List
This page intentionally blank
April 2008 / USA
9
UniGroup Too Price List
Basic Monolithic Panel with Square Painted Top Cap
UniGroup Too
Fabric
Features
Specification Tips
• For mixed fabric surfaces, price at higher fabric
grade.
• Panels will accept add-on panels up to a
combined height of 80′′(2032mm). For aesthetic
consistency, specify UniGroup Too add-on
panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
• If 90° top cap for four-way and 120° top cap for
three-way are not specified, additional top cap
end plugs will need to be ordered.
• Additional top cap end plugs and base raceway
end caps will need to be specified if finish posts
are not ordered.
E2MN-B
• Includes non-powered or powered panel assembly,
square top cap with aligner, with or without one-piece
base raceway cover, 1.6 hinge kits, side trim rails,
leveling glides and carpet gripper; power distribution
assembly/flex connector(s) when power is specified.
.6 top cap end plugs and base raceway end caps are
shipped with each panel. Order additional as
necessary.
• Acoustical panel surfaces.
• Panel surfaces may have the same fabric on both
sides or a different fabric on each side.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
To Order, Specify:
NOTE:
1) Product number.
This panel has fabric/colorway
restrictions, see systems fabrics/
color legend.
2) Fabric/colorway for panel side one.
3) Fabric/colorway for panel side two.
4) Trim color raceway cover, glide housings and
end caps. $23 upcharge (list) for Metallic trim
color.
5) Trim color for top cap and side trim rails. $23
upcharge (list) for Metallic trim color.
Non-Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Non-Powered (Example: E2MN-462-B) product numbers and list prices shown on opposite page:
Panel Width
3-Circuit Powered
(Example: E2MP-462-B)
6-Circuit Powered
(Example: E2MP-462-6)
3-Circuit Powered without
Base Raceway Cover
(Example: E2MP-462-BE)
6-Circuit Powered without
Base Raceway Cover
(Example: E2MP-462-6E)
or
or
NYC 6-Circuit Powered
(Example: E2MP-462-6Y)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: E2MP-462-BYE)
NYC 6-Circuit Powered
without Base Raceway Cover
(Example: E2MP-462-6YE)
Non-Powered without
Base Raceway Cover
(Example: E2MN-462-BE)
or
or
NYC 3-Circuit Powered
(Example: E2MP-462-BY)
Deduct:
Add:
Add:
Add:
Add:
24′′(610mm)
-$42
$155
$276
$103
$224
30′′(762mm)
-44
155
276
100
221
36′′(914mm)
-48
155
276
90
211
42′′(1067mm)
-53
155
276
85
206
48′′(1219mm)
-56
155
276
80
201
60′′(1524mm)
-66
155
276
67
188
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Non-powered panels ship without receptacle ports in the base raceway cover.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
• For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on
Power Logic.
• For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.
10
April 2008 / USA
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Basic Monolithic Panel with Square Painted Top Cap
UniGroup Too
Actual
Height
Fabric
32′′(813mm)
Width
Non-Powered
Number
Fabric Grade
A
B
24′′(610mm)
E2MN-230- B
$ 426
491
30′′(762mm)
E2MN-3030- B
514
36′′(914mm)
E2MN-330- B
566
42′′(1067mm)
E2MN-4230- B
595
48′′(1219mm)
E2MN-430- B
678
60′′(1524mm)
E2MN-530- B
$ 466
40′′(1016mm)
24′′(610mm)
E2MN-238- B
517
30′′(762mm)
E2MN-3038- B
545
36′′(914mm)
E2MN-338- B
595
42′′(1067mm)
E2MN-4238- B
627
48′′(1219mm)
E2MN-438- B
709
60′′(1524mm)
E2MN-538- B
$ 486
48′′(1219mm)
24′′(610mm)
E2MN-246- B
539
30′′(762mm)
E2MN-3046- B
570
36′′(914mm)
E2MN-346- B
622
42′′(1067mm)
E2MN-4246- B
657
48′′(1219mm)
E2MN-446- B
755
60′′(1524mm)
E2MN-546- B
$ 515
56′′(1422mm)
24′′(610mm)
E2MN-254- B
585
30′′(762mm)
E2MN-3054- B
612
36′′(914mm)
E2MN-354- B
664
42′′(1067mm)
E2MN-4254- B
700
48′′(1219mm)
E2MN-454- B
805
60′′(1524mm)
E2MN-554- B
$ 502
64′′(1626mm)
24′′(610mm)
E2MN-262- B
570
30′′(762mm)
E2MN-3062- B
622
36′′(914mm)
E2MN-362- B
670
42′′(1067mm)
E2MN-4262- B
703
48′′(1219mm)
E2MN-462- B
826
60′′(1524mm)
E2MN-562- B
$ 539
72′′(1829mm)
24′′(610mm)
E2MN-270- B
612
30′′(762mm)
E2MN-3070- B
666
36′′(914mm)
E2MN-370- B
722
42′′(1067mm)
E2MN-4270- B
752
48′′(1219mm)
E2MN-470- B
884
60′′(1524mm)
E2MN-570- B
$ 684
80′′(2032mm)
24′′(610mm)
E2MN-278- B
775
30′′(762mm)
E2MN-3078- B
852
36′′(914mm)
E2MN-378- B
923
42′′(1067mm)
E2MN-4278- B
969
48′′(1219mm)
E2MN-478- B
1083
60′′(1524mm)
E2MN-578- B
List price shown is for a non-powered panel with base raceway cover.
$ 460
525
560
612
641
724
$ 500
551
591
641
673
755
$ 520
573
616
668
703
801
$ 549
619
658
710
746
851
$ 540
608
672
720
753
876
$ 577
650
716
772
802
934
$ 722
813
902
973
1019
1133
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
C
D
E
F
G
$ 510
575
618
670
699
782
$ 550
601
649
699
731
813
$ 570
623
674
726
761
859
$ 599
669
716
768
804
909
$ 594
662
734
782
815
938
$ 631
704
778
834
864
996
$ 776
867
964
1035
1081
1195
$ 550
615
666
718
747
830
$ 590
641
697
747
779
861
$ 610
663
722
774
809
907
$ 639
709
764
816
852
957
$ 638
706
802
850
883
1006
$ 675
748
846
902
932
1064
$ 820
911
1032
1103
1149
1263
$ 560
625
678
730
759
842
$ 600
651
709
759
791
873
$ 620
673
750
802
837
935
$ 649
719
812
864
900
1005
$ 646
714
854
902
935
1058
$ 687
760
910
966
996
1128
$ 832
923
1148
1219
1265
1379
$ 570
635
688
740
769
852
$ 610
661
719
769
801
883
$ 630
683
806
858
893
991
$ 659
729
876
928
964
1069
$ 652
720
924
972
1005
1128
$ 699
772
986
1042
1072
1204
$ 876
967
1238
1309
1355
1469
$ 580
645
698
750
779
862
$ 620
671
761
811
843
925
$ 640
693
862
914
949
1047
$ 677
747
940
992
1028
1133
$ 688
756
994
1042
1075
1198
$ 733
806
1062
1118
1148
1280
$ 924
1015
1328
1399
1445
1559
April 2008 / USA
11
UniGroup Too Price List
Laminate Monolithic Panel with Square Painted Top Cap
UniGroup Too
Laminate
E2DN-B
Features
Specification Tips
• Includes non-powered or powered panel assembly,
square top cap with aligner, with or without one-piece
base raceway cover, 1.6 hinge kits, side trim rails,
leveling glides and carpet gripper; power distribution
assembly/flex connector(s) when power is specified.
.6 top cap end plugs and base raceway end caps are
shipped with each panel. Order additional as
necessary.
• Panel surfaces may have the same laminate surface
color on both sides or a different laminate surface
color on each side.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
• Both sides in the same color laminate or
different color laminate on each side.
• Panels will accept add-on panels up to a
combined height of 80′′(2032mm). For aesthetic
consistency, specify UniGroup Too add-on
panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
• If 90° top cap for four-way and 120° top cap for
three-way are not specified, additional top cap
end plugs will need to be ordered.
• Additional top cap end plugs and base raceway
end caps will need to be specified if finish posts
are not ordered.
To Order, Specify:
1) Product number.
2) Laminate surface color for panel side one.
3) Laminate surface color for panel side two.
4) Trim color raceway cover, glide housings and
end caps. $23 upcharge (list) for Metallic trim
color.
5) Trim color for top cap and side trim rails. $23
upcharge (list) for Metallic trim color.
Non-Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Non-Powered (Example: E2DN-462-B) product numbers and list prices shown on opposite page:
Panel Width
3-Circuit Powered
(Example: E2DP-462-B)
6-Circuit Powered
(Example: E2DP-462-6)
3-Circuit Powered without
Base Raceway Cover
(Example: E2DP-462-BE)
6-Circuit Powered without
Base Raceway Cover
(Example: E2DP-462-6E)
or
or
NYC 6-Circuit Powered
(Example: E2DP-462-6Y)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: E2DP-462-BYE)
NYC 6-Circuit Powered
without Base Raceway Cover
(Example: E2DP-462-6YE)
Non-Powered without
Base Raceway Cover
(Example: E2DN-462-BE)
or
or
NYC 3-Circuit Powered
(Example: E2DP-462-BY)
Deduct:
Add:
Add:
Add:
Add:
24′′(610mm)
-$42
$155
$276
$103
$224
30′′(762mm)
-44
155
276
100
221
36′′(914mm)
-48
155
276
90
211
42′′(1067mm)
-53
155
276
85
206
48′′(1219mm)
-56
155
276
80
201
60′′(1524mm)
-66
155
276
67
188
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Non-powered panels ship without receptacle ports in the base raceway cover.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
• For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on
Power Logic.
• For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.
12
April 2008 / USA
Class AC – GSA: Open Market
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Laminate Monolithic Panel with Square Painted Top Cap
UniGroup Too
Actual
Height
Laminate
Width
32′′(813mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
40′′(1016mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
48′′(1219mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
56′′(1422mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
64′′(1626mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
72′′(1829mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
80′′(2032mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
List price shown is for a non-powered panel with base raceway cover.
Non-Powered
Number
Price
E2DN-230- B
E2DN-3030- B
E2DN-330- B
E2DN-4230- B
E2DN-430- B
E2DN-530- B
E2DN-238- B
E2DN-3038- B
E2DN-338- B
E2DN-4238- B
E2DN-438- B
E2DN-538- B
E2DN-246- B
E2DN-3046- B
E2DN-346- B
E2DN-4246- B
E2DN-446- B
E2DN-546- B
E2DN-254- B
E2DN-3054- B
E2DN-354- B
E2DN-4254- B
E2DN-454- B
E2DN-554- B
E2DN-262- B
E2DN-3062- B
E2DN-362- B
E2DN-4262- B
E2DN-462- B
E2DN-562- B
E2DN-270- B
E2DN-3070- B
E2DN-370- B
E2DN-4270- B
E2DN-470- B
E2DN-570- B
E2DN-278- B
E2DN-3078- B
E2DN-378- B
E2DN-4278- B
E2DN-478- B
E2DN-578- B
$ 816
917
933
1028
1081
1231
$ 847
939
1018
1110
1140
1288
$ 884
980
1063
1160
1225
1374
$ 959
1092
1141
1238
1307
1502
$ 936
1063
1160
1250
1312
1541
$1022
1158
1261
1366
1426
1673
$1230
1393
1532
1658
1741
1917
Product marked with this symbol available as GSA open market.
Class AC – GSA: Open Market
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
13
UniGroup Too Price List
Monolithic Panel with Full-Height Inserts and Square Painted Top Cap
UniGroup Too
Fabric Inserts
E2LN-B
Features
Specification Tips
• Includes non-powered or powered full-height panel
core assembly, monolithic panel inserts square top
cap with aligner, with or without one-piece base
raceway cover, 1.6 hinge kits, side trim rails, leveling
glides and carpet gripper; power distribution
assembly/flex connector(s) when power is specified.
.6 top cap end plugs and base raceway end caps are
shipped with each panel. Order additional as
necessary.
• Acoustical panel surfaces have moderate tackable
properties.
• Each insert may have the same fabric or a different
fabric.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled inserts, top cap, base
raceway cover and side trim rails.
• Inserts may easily be changed on installed monolithic
panels without components.
• Can be field-modified from full-height monolithic panel
insert to segmented panel inserts.
• For mixed fabric surfaces, price at higher fabric
grade.
• Panels will accept add-on panels up to a
combined height of 80′′(2032mm). For aesthetic
consistency, specify UniGroup Too add-on
panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
• If 90° top cap for four-way and 120° top cap for
three-way are not specified, additional top cap
end plugs will need to be ordered.
• Additional top cap end plugs and base raceway
end caps will need to be specified if finish posts
are not ordered.
To Order, Specify:
1) Product number.
2) Fabric/colorway for panel insert side one.
3) Fabric/colorway for panel insert side two.
4) Trim color raceway cover, glide housings and
end caps. $23 upcharge (list) for Metallic trim
color.
5) Trim color for top cap and side trim rails. $23
upcharge (list) for Metallic trim color.
Non-Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Non-Powered (Example: E2LN-462-BFF) product numbers and list prices shown on opposite page:
Panel Width
3-Circuit Powered
(Example: E2LP-462-BFF)
6-Circuit Powered
(Example: E2LP-462-6FF)
3-Circuit Powered without
Base Raceway Cover
(Example: E2LP-462-BEFF)
6-Circuit Powered without
Base Raceway Cover
(Example: E2LP-462-6EFF)
or
or
NYC 6-Circuit Powered
(Example: E2LP-462-6YFF)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: E2LP-462-BYEFF)
NYC 6-Circuit Powered
without Base Raceway Cover
(Example: E2LP-462-6YEFF)
Non-Powered without
Base Raceway Cover
(Example: E2LN-462-BEFF)
or
or
NYC 3-Circuit Powered
(Example: E2LP-462-BYFF)
Deduct:
Add:
Add:
Add:
Add:
24′′(610mm)
-$42
$155
$276
$103
$224
30′′(762mm)
-44
155
276
100
221
36′′(914mm)
-48
155
276
90
211
42′′(1067mm)
-53
155
276
85
206
48′′(1219mm)
-56
155
276
80
201
60′′(1524mm)
-66
155
276
67
188
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Non-powered panels ship without receptacle ports in the base raceway cover.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
• For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on
Power Logic.
• For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.
14
April 2008 / USA
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Monolithic Panel with Full-Height Inserts and Square Painted Top Cap
UniGroup Too
Actual
Height
Fabric Inserts
Width
Non-Powered
Number
Fabric Grade
A
B
32′′(813mm)
24′′(610mm)
E2LN-230- B
FF
$ 497
FF
564
30′′(762mm)
E2LN-3030- B
FF
608
36′′(914mm)
E2LN-330- B
FF
675
42′′(1067mm)
E2LN-4230- B
FF
721
48′′(1219mm)
E2LN-430- B
FF
815
60′′(1524mm)
E2LN-530- B
FF
$ 551
40′′(1016mm)
24′′(610mm)
E2LN-238- B
FF
567
30′′(762mm)
E2LN-3038- B
FF
660
36′′(914mm)
E2LN-338- B
FF
728
42′′(1067mm)
E2LN-4238- B
FF
781
48′′(1219mm)
E2LN-438- B
FF
876
60′′(1524mm)
E2LN-538- B
FF
$ 590
48′′(1219mm)
24′′(610mm)
E2LN-246- B
FF
653
30′′(762mm)
E2LN-3046- B
FF
709
36′′(914mm)
E2LN-346- B
FF
785
42′′(1067mm)
E2LN-4246- B
FF
843
48′′(1219mm)
E2LN-446- B
FF
856
60′′(1524mm)
E2LN-546- B
FF
$ 640
56′′(1422mm)
24′′(610mm)
E2LN-254- B
FF
719
30′′(762mm)
E2LN-3054- B
FF
776
36′′(914mm)
E2LN-354- B
FF
856
42′′(1067mm)
E2LN-4254- B
FF
919
48′′(1219mm)
E2LN-454- B
FF
1041
60′′(1524mm)
E2LN-554- B
FF
$ 662
64′′(1626mm)
24′′(610mm)
E2LN-262- B
FF
742
30′′(762mm)
E2LN-3062- B
FF
824
36′′(914mm)
E2LN-362- B
FF
845
42′′(1067mm)
E2LN-4262- B
FF
970
48′′(1219mm)
E2LN-462- B
FF
1112
60′′(1524mm)
E2LN-562- B
FF
$ 727
72′′(1829mm)
24′′(610mm)
E2LN-270- B
FF
814
30′′(762mm)
E2LN-3070- B
FF
903
36′′(914mm)
E2LN-370- B
FF
996
42′′(1067mm)
E2LN-4270- B
FF
1064
48′′(1219mm)
E2LN-470- B
FF
1218
60′′(1524mm)
E2LN-570- B
FF
$ 879
80′′(2032mm)
24′′(610mm)
E2LN-278- B
FF
983
30′′(762mm)
E2LN-3078- B
FF
1097
36′′(914mm)
E2LN-378- B
FF
1208
42′′(1067mm)
E2LN-4278- B
FF
1294
48′′(1219mm)
E2LN-478- B
FF
1443
60′′(1524mm)
E2LN-578- B
List price shown is for a non-powered panel with base raceway cover.
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
$ 533
600
656
723
807
863
$ 587
603
708
776
829
924
$ 626
689
757
833
891
904
$ 676
755
824
904
967
1089
$ 702
782
876
897
1022
1164
$ 767
854
955
1048
1116
1270
$ 919
1023
1149
1260
1346
1495
C
D
E
F
G
$ 587
654
720
787
833
927
$ 641
657
772
840
893
988
$ 680
743
821
897
955
968
$ 730
809
888
968
1031
1153
$ 762
842
946
967
1092
1234
$ 827
914
1025
1118
1186
1340
$ 979
1083
1219
1330
1416
1565
$ 629
696
770
837
883
977
$ 683
699
822
890
943
1038
$ 722
785
871
947
1005
1018
$ 772
851
938
1018
1081
1203
$ 808
888
1018
1039
1164
1306
$ 873
960
1097
1190
1258
1412
$1025
1129
1291
1402
1488
1637
$ 641
708
784
851
897
991
$ 695
711
836
904
957
1052
$ 734
797
903
979
1037
1050
$ 858
863
994
1074
1137
1259
$ 812
894
1072
1093
1218
1360
$ 885
972
1165
1258
1326
1480
$1037
1141
1417
1528
1614
1763
$ 651
718
796
863
909
1003
$ 705
721
850
918
971
1066
$ 744
807
963
1039
1097
1110
$ 924
873
1062
1142
1205
1327
$ 816
902
1148
1169
1294
1436
$ 899
986
1247
1340
1408
1562
$1089
1193
1513
1624
1710
1859
$ 663
730
806
873
919
1013
$ 717
733
892
960
1013
1108
$ 756
819
1021
1097
1155
1168
$ 988
895
1128
1208
1271
1393
$ 838
942
1224
1245
1370
1512
$ 939
1026
1327
1420
1488
1642
$1137
1241
1609
1720
1806
1955
April 2008 / USA
15
UniGroup Too Price List
Monolithic Panel with Segmented Inserts and Square Painted Top Cap
UniGroup Too
Fabric Inserts
E2SN-B
Features
Specification Tips
• Includes non-powered or powered full-height panel
core assembly, segmented panel inserts and trim
strips, square top cap with aligner, with or without
one-piece base raceway cover, 1.6 hinge kits, side
trim rails, leveling glides and carpet gripper; power
distribution assembly/flex connector(s) when power is
specified. .6 top cap end plugs and base raceway end
caps are shipped with each panel. Order additional as
necessary.
• Acoustical panel surfaces have moderate tackable
properties.
• Panel surfaces may have the same fabric on both
sides or a different fabric on each side.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled inserts, top cap, base
raceway cover side trim rails.
• Inserts may easily be changed on installed monolithic
panels without components.
• Refer to the Panel Configuration Options chart in
Specification Guide for panel and insert heights
(nominal vs. actual) and insert configurations.
• Mixed fabric surfaces options consists of one
fabric/colorway per side. Price at higher fabric
grade.
• Panels will accept add-on panels up to a
combined height of 80′′(2032mm). For aesthetic
consistency, specify UniGroup Too add-on
panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
• If 90° top cap for four-way and 120° top cap for
three-way are not specified, additional top cap
end plugs will need to be ordered.
• Additional top cap end plugs and base raceway
end caps will need to be specified if finish posts
are not ordered.
To Order, Specify:
1) Product number.
2) Fabric/colorway for panel insert side one.
3) Fabric/colorway for panel insert side two.
4) Trim color raceway cover, glide housings and
end caps. $23 upcharge (list) for Metallic trim
color.
5) Trim color for top cap, side trim rails and trim
strip(s) for panel insert. $23 upcharge (list) for
Metallic trim color.
Non-Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Non-Powered (Example: E2SN-462-BFF) product numbers and list prices shown on opposite page:
Panel Width
3-Circuit Powered
(Example: E2SP-462-BFF)
6-Circuit Powered
(Example: E2SP-462-6FF)
3-Circuit Powered without
Base Raceway Cover
(Example: E2SP-462-BEFF)
6-Circuit Powered without
Base Raceway Cover
(Example: E2SP-462-6EFF)
or
or
NYC 6-Circuit Powered
(Example: E2SP-462-6YFF)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: E2SP-462-BYEFF)
NYC 6-Circuit Powered
without Base Raceway Cover
(Example: E2SP-462-6YEFF)
Non-Powered without
Base Raceway Cover
(Example: E2SN-462-BEFF)
or
or
NYC 3-Circuit Powered
(Example: E2SP-462-BYFF)
Deduct:
Add:
Add:
Add:
Add:
24′′(610mm)
-$42
$155
$276
$103
$224
30′′(762mm)
-44
155
276
100
221
36′′(914mm)
-48
155
276
90
211
42′′(1067mm)
-53
155
276
85
206
48′′(1219mm)
-56
155
276
80
201
60′′(1524mm)
-66
155
276
67
188
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Non-powered panels ship without receptacle ports in the base raceway cover.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
• For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on
Power Logic.
• For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.
16
April 2008 / USA
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Monolithic Panel with Segmented Inserts and Square Painted Top Cap
UniGroup Too
Actual
Height
Fabric Inserts
40′′(1016mm)
Width
Non-Powered
Number
Fabric Grade
A
B
24′′(610mm)
E2SN-238- B
FF
$ 608
FF
664
30′′(762mm)
E2SN-3038- B
FF
725
36′′(914mm)
E2SN-338- B
FF
802
42′′(1067mm)
E2SN-4238- B
FF
855
48′′(1219mm)
E2SN-438- B
FF
957
60′′(1524mm)
E2SN-538- B
FF
$ 636
48′′(1219mm) 24′′(610mm)
E2SN-246- B
FF
696
30′′(762mm)
E2SN-3046- B
FF
760
36′′(914mm)
E2SN-346- B
FF
842
42′′(1067mm)
E2SN-4246- B
FF
898
48′′(1219mm)
E2SN-446- B
FF
1016
60′′(1524mm)
E2SN-546- B
FF
$ 771
56′′(1422mm) 24′′(610mm)
E2SN-254- B
FF
849
30′′(762mm)
E2SN-3054- B
FF
925
36′′(914mm)
E2SN-354- B
FF
1023
42′′(1067mm)
E2SN-4254- B
FF
1089
48′′(1219mm)
E2SN-454- B
FF
1229
60′′(1524mm)
E2SN-554- B
FF
$ 776
64′′(1626mm) 24′′(610mm)
E2SN-262- B
FF
853
30′′(762mm)
E2SN-3062- B
FF
949
36′′(914mm)
E2SN-362- B
FF
1047
42′′(1067mm)
E2SN-4262- B
FF
1113
48′′(1219mm)
E2SN-462- B
FF
1268
60′′(1524mm)
E2SN-562- B
FF
$ 918
72′′(1829mm) 24′′(610mm)
E2SN-270- B
FF
1002
30′′(762mm)
E2SN-3070- B
FF
1116
36′′(914mm)
E2SN-370- B
FF
1235
42′′(1067mm)
E2SN-4270- B
FF
1308
48′′(1219mm)
E2SN-470- B
FF
1485
60′′(1524mm)
E2SN-570- B
FF
$1035
80′′(2032mm) 24′′(610mm)
E2SN-278- B
FF
1136
30′′(762mm)
E2SN-3078- B
FF
1268
36′′(914mm)
E2SN-378- B
FF
1400
42′′(1067mm)
E2SN-4278- B
FF
1484
48′′(1219mm)
E2SN-478- B
FF
1655
60′′(1524mm)
E2SN-578- B
List price shown is for a non-powered panel with base raceway cover.
$ 642
698
771
848
901
1003
$ 670
730
806
888
944
1062
$ 805
883
971
1069
1135
1275
$ 814
891
999
1097
1163
1318
$ 956
1040
1166
1285
1358
1535
$1073
1174
1318
1450
1534
1705
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
C
D
E
F
G
$ 692
748
829
906
959
1061
$ 720
780
864
946
1002
1120
$ 855
933
1029
1127
1193
1333
$ 868
945
1061
1159
1225
1380
$1010
1094
1228
1347
1420
1597
$1127
1228
1380
1512
1596
1767
$ 732
788
877
954
1007
1109
$ 760
820
912
994
1050
1168
$ 895
973
1077
1175
1241
1381
$ 912
989
1129
1227
1293
1448
$1054
1138
1296
1415
1488
1665
$1171
1272
1448
1580
1664
1835
$ 742
798
889
966
1019
1121
$ 770
830
940
1022
1078
1180
$ 905
983
1127
1225
1291
1409
$ 922
999
1181
1279
1345
1470
$1064
1148
1360
1479
1552
1729
$1183
1284
1566
1698
1782
1953
$ 752
808
901
978
1031
1133
$ 780
840
996
1078
1134
1192
$ 915
993
1191
1289
1355
1465
$ 934
1011
1251
1349
1415
1534
$1078
1162
1436
1555
1628
1805
$1229
1330
1656
1788
1872
2043
$ 772
828
941
1018
1071
1173
$ 800
860
1052
1134
1190
1232
$ 935
1013
1253
1351
1417
1521
$ 962
1039
1323
1421
1487
1596
$1114
1198
1512
1631
1704
1881
$1275
1376
1746
1878
1962
2133
April 2008 / USA
17
UniGroup Too Price List
Monolithic Panel Core with Square Painted Top Cap — without Inserts
UniGroup Too
Panel Core
Features
Specification Tips
• Includes non-powered or powered panel core
assembly, square top cap with aligner, with or without
one-piece base raceway cover, 1.6 hinge kits, side
trim rails, leveling glides and carpet gripper; power
distribution assembly/flex connector(s) when power is
specified. .6 top cap end plugs and base raceway end
caps are shipped with each panel. Order additional as
necessary.
• For use with separately specified inserts.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
• Panels will accept add-on panels up to a
combined height of 80′′(2032mm). For aesthetic
consistency, specify UniGroup Too add-on
panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
• If 90° top cap for four-way and 120° top cap for
three-way are not specified, additional top cap
end plugs will need to be ordered.
• Additional top cap end plugs and base raceway
end caps will need to be specified if finish posts
are not ordered.
To Order, Specify:
E2BN-B
1) Product number.
2) Trim color raceway cover, glide housings and
end caps. $23 upcharge (list) for Metallic trim
color.
3) Trim color for top cap and side trim rails. $23
upcharge (list) for Metallic trim color.
Non-Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Non-Powered (Example: E2BN-462-B) product numbers and list prices shown on opposite page:
Panel Width
3-Circuit Powered
(Example: E2BP-462-B)
6-Circuit Powered
(Example: E2BP-462-6)
3-Circuit Powered without
Base Raceway Cover
(Example: E2BP-462-BE)
6-Circuit Powered without
Base Raceway Cover
(Example: E2BP-462-6E)
or
or
NYC 6-Circuit Powered
(Example: E2BP-462-6Y)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: E2BP-462-BYE)
NYC 6-Circuit Powered
without Base Raceway Cover
(Example: E2BP-462-6YE)
Non-Powered without
Base Raceway Cover
(Example: E2BN-462-BE)
or
or
NYC 3-Circuit Powered
(Example: E2BP-462-BY)
Deduct:
Add:
Add:
Add:
Add:
24′′(610mm)
-$42
$155
$276
$103
$224
30′′(762mm)
-44
155
276
100
221
36′′(914mm)
-48
155
276
90
211
42′′(1067mm)
-53
155
276
85
206
48′′(1219mm)
-56
155
276
80
201
60′′(1524mm)
-66
155
276
67
188
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Non-powered panels ship without receptacle ports in the base raceway cover.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
• For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on
Power Logic.
• For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.
18
April 2008 / USA
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Monolithic Panel Core with Square Painted Top Cap — without Inserts
UniGroup Too
Actual
Height
Panel Core
Width
32′′(813mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
40′′(1016mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
48′′(1219mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
56′′(1422mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
64′′(1626mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
72′′(1829mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
80′′(2032mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
List price shown is for a non-powered panel with base raceway cover.
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
Non-Powered
Number
Price
E2BN-230- B
E2BN-3030- B
E2BN-330- B
E2BN-4230- B
E2BN-430- B
E2BN-530- B
E2BN-238- B
E2BN-3038- B
E2BN-338- B
E2BN-4238- B
E2BN-438- B
E2BN-538- B
E2BN-246- B
E2BN-3046- B
E2BN-346- B
E2BN-4246- B
E2BN-446- B
E2BN-546- B
E2BN-254- B
E2BN-3054- B
E2BN-354- B
E2BN-4254- B
E2BN-454- B
E2BN-554- B
E2BN-262- B
E2BN-3062- B
E2BN-362- B
E2BN-4262- B
E2BN-462- B
E2BN-562- B
E2BN-270- B
E2BN-3070- B
E2BN-370- B
E2BN-4270- B
E2BN-470- B
E2BN-570- B
E2BN-278- B
E2BN-3078- B
E2BN-378- B
E2BN-4278- B
E2BN-478- B
E2BN-578- B
$306
354
369
407
427
487
$335
371
394
427
452
510
$351
387
410
448
473
543
$370
421
440
478
504
579
$362
410
448
482
506
593
$387
440
479
519
541
636
$491
558
613
664
696
779
April 2008 / USA
19
UniGroup Too Price List
Single Base Insert
UniGroup Too
Base Insert — Fabric
Feature
To Order, Specify:
• Includes one base insert.
1) Product number.
Specification Tips
2) Fabric/colorway.
• Only for use at base with monolithic core panel,
separately specified.
• May be used with upper inserts and appropriate
height panel core.
• Base and/or upper insert combinations may vary per
panel side.
• Only one base insert per side is allowed.
E2JF
20
April 2008 / USA
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Single Base Insert
UniGroup Too
Installed
Height
Insert
Height
Base Insert — Fabric 16′′(406mm)
12′′(305mm)
32′′(813mm)
28′′(711mm)
40′′(1016mm)
36′′(914mm)
48′′(1219mm)
44′′(1118mm)
56′′(1422mm)
52′′(1321mm)
64′′(1626mm)
60′′(1524mm)
72′′(1829mm)
68′′(1727mm)
80′′(2032mm)
76′′(1930mm)
Width
Number
Fabric Grade
A
B
C
D
E
F
G
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
E2JF-214
E2JF-3014
E2JF-314
E2JF-4214
E2JF-414
E2JF-514
E2JF-230
E2JF-3030
E2JF-330
E2JF-4230
E2JF-430
E2JF-530
E2JF-238
E2JF-3038
E2JF-338
E2JF-4238
E2JF-438
E2JF-538
E2JF-246
E2JF-3046
E2JF-346
E2JF-4246
E2JF-446
E2JF-546
E2JF-254
E2JF-3054
E2JF-354
E2JF-4254
E2JF-454
E2JF-554
E2JF-262
E2JF-3062
E2JF-362
E2JF-4262
E2JF-462
E2JF-562
E2JF-270
E2JF-3070
E2JF-370
E2JF-4270
E2JF-470
E2JF-570
E2JF-278
E2JF-3078
E2JF-378
E2JF-4278
E2JF-478
E2JF-578
$ 74
82
93
106
116
128
$ 79
87
98
111
122
136
$ 89
97
111
125
138
154
$100
110
125
142
156
173
$113
124
142
160
176
196
$127
141
160
180
200
221
$145
159
180
205
224
250
$163
179
205
231
254
282
$116
124
145
158
168
180
$121
129
150
163
174
188
$131
139
163
177
190
206
$142
152
177
194
208
225
$155
166
194
212
228
248
$173
187
216
236
256
277
$191
205
236
261
280
306
$209
225
261
287
310
338
$136
144
169
182
192
204
$141
149
174
187
198
212
$151
159
187
201
214
230
$162
172
201
218
232
249
$175
186
218
236
252
272
$195
209
250
270
290
311
$213
227
270
295
314
340
$231
247
295
321
344
372
$141
149
175
188
198
210
$146
154
180
193
204
218
$156
164
193
207
220
236
$167
$177
215
232
246
263
$180
191
243
261
277
297
$201
215
276
296
316
337
$219
233
302
327
346
372
$237
253
354
380
403
431
$146
154
181
194
204
216
$151
159
185
198
209
223
$161
169
199
213
226
242
$172
$182
243
260
274
291
$185
196
275
293
309
329
$224
238
311
331
351
372
$242
256
340
365
384
410
$260
276
399
425
448
476
$151
159
201
214
224
236
$156
164
190
203
214
228
$166
174
219
233
246
262
$177
$187
271
288
302
319
$195
206
306
324
340
360
$247
261
347
367
387
408
$265
279
378
403
422
448
$283
299
444
470
493
521
$ 91
99
116
129
139
151
$ 96
104
121
134
145
159
$106
114
134
148
161
177
$117
127
148
165
179
196
$130
141
165
183
199
219
$146
160
185
205
225
246
$164
178
205
230
249
275
$182
198
230
256
279
307
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
21
UniGroup Too Price List
Single Upper Inserts
UniGroup Too
Insert
Height
Upper Insert — Fabric or
Markerboard
8′′(203mm)
16′′(406mm)
Width
Number
Fabric Grade
A
B
C
D
E
F
G
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
E2TF-208
E2TF-3008
E2TF-308
E2TF-4208
E2TF-408
E2TF-508
E2TF-216
E2TF-3016
E2TF-316
E2TF-4216
E2TF-416
E2TF-516
$ 57
59
67
74
80
88
$ 64
67
75
86
91
100
$ 93
95
103
110
116
124
$100
103
111
122
127
136
$ 98
100
108
115
121
129
$105
108
116
127
132
141
$105
107
115
122
128
136
$112
115
123
134
139
148
$110
112
120
127
133
141
$117
120
128
139
144
153
$115
117
125
132
138
146
$122
125
133
144
149
158
1
16′′(406mm)
E2TF
32′′(813mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
E2TM-216E2TM-3016E2TM-316E2TM-4216E2TM-416E2TM-516E2TM-232E2TM-3032E2TM-332E2TM-4232E2TM-432E2TM-532-
$ 76
78
86
93
99
107
$ 83
86
94
105
110
119
Markerboard
Price (-N)
Markerboard
with Tray (-M)
$214
227
244
259
276
292
$322
343
364
388
415
437
$231
244
261
276
293
309
339
360
381
405
432
454
Feature
To Order, Specify:
• Includes one insert and segment trim strip or markerboard
tray.
1) Product number, including:
1 Markerboard Option:
Specification Tips
E2TM
• For markerboard installation allow clearance above panel
equal to height of insert.
• Must be used with monolithic core panel and base insert,
separately specified.
• Maximum of 4 upper inserts is allowed per panel side.
• Base and/or upper insert combinations may vary per panel
side.
• Markerboard cleaner & conditioner, order service part
#7031-7001.
• Order markerboard with tray in lower application to protect
lower fabric insert.
Product marked with this symbol available as GSA open
market.
22
April 2008 / USA
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
N Markerboard with segment trim strip
M Markerboard with tray
2) Fabric/colorway (for fabric insert).
3) Trim color for segment trim strip or
markerboard tray. $23 upcharge (list) for
Metallic trim color.
UniGroup Too Price List
This page intentionally blank
April 2008 / USA
23
UniGroup Too Price List
Glazed Monolithic Panel with Square Painted Top Cap
UniGroup Too
Glazed
Features
Specification Tips
• Includes non-powered or powered panel assembly,
square top cap with aligner, with or without one-piece
base raceway cover, 1.6 hinge kits, side trim rails,
leveling glides and carpet gripper; power distribution
assembly/flex connector(s) when power is specified.
.6 top cap end plugs and base raceway end caps are
shipped with each panel. Order additional as
necessary.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Does not accept top feed modules.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
• Panels will accept glazed add-on panels up to a
combined height of 80″(2032mm). For aesthetic
consistency, specify UniGroup Too add-on
panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
• If 90° top cap for four-way and 120° top cap for
three-way are not specified, additional top cap
end plugs will need to be ordered.
• Additional top cap end plugs and base raceway
end caps will need to be specified if finish posts
are not ordered.
To Order, Specify:
E2GN-B
1) Product number.
2) Glazing finish color.
3) Trim color raceway cover. $23 upcharge (list)
for Metallic trim color.
4) Trim color for frame, top cap and side trim
rails. $23 upcharge (list) forMetallic trim color.
Non-Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Non-Powered (Example: E2GN-462-B) product numbers and list prices shown on opposite page:
Panel Width
3-Circuit Powered
(Example: E2GP-462-B)
6-Circuit Powered
(Example: E2GP-462-6)
3-Circuit Powered without
Base Raceway Cover
(Example: E2GP-462-BE)
6-Circuit Powered without
Base Raceway Cover
(Example: E2GP-462-6E)
or
or
NYC 6-Circuit Powered
(Example: E2GP-462-6Y)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: E2GP-462-BYE)
NYC 6-Circuit Powered
without Base Raceway Cover
(Example: E2GP-462-6YE)
Non-Powered without
Base Raceway Cover
(Example: E2GN-462-BE)
or
or
NYC 3-Circuit Powered
(Example: E2GP-462-BY)
Deduct:
Add:
Add:
Add:
Add:
24′′(610mm)
-$42
$155
$276
$103
$224
30′′(762mm)
-44
155
276
100
221
36′′(914mm)
-48
155
276
90
211
42′′(1067mm)
-53
155
276
85
206
48′′(1219mm)
-56
155
276
80
201
60′′(1524mm)
-66
155
276
67
188
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Non-powered panels ship without receptacle ports in the base raceway cover.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
• For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on
Power Logic.
• For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.
24
April 2008 / USA
Class AC – GSA: Open Market
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Glazed Monolithic Panel with Square Painted Top Cap
UniGroup Too
Actual
Height
Glazed
Width
Non-Powered
Number
64′′(1626mm)
24′′(610mm)
E2GN-262- B
30′′(762mm)
E2GN-3062- B
36′′(914mm)
E2GN-362- B
42′′(1067mm)
E2GN-4262- B
48′′(1219mm)
E2GN-462- B
60′′(1524mm)
E2GN-562- B
72′′(1829mm)
24′′(610mm)
E2GN-270- B
30′′(762mm)
E2GN-3070- B
36′′(914mm)
E2GN-370- B
42′′(1067mm)
E2GN-4270- B
48′′(1219mm)
E2GN-470- B
60′′(1524mm)
E2GN-570- B
80′′(2032mm)
24′′(610mm)
E2GN-278- B
30′′(762mm)
E2GN-3078- B
36′′(914mm)
E2GN-378- B
42′′(1067mm)
E2GN-4278- B
48′′(1219mm)
E2GN-478- B
60′′(1524mm)
E2GN-578- B
List price shown is for a non-powered panel with base raceway cover.
Clear or
Bronze Price
Frosted Price
$ 960
1153
1181
1324
1425
1661
$1025
1230
1255
1416
1521
1774
$1242
1478
1505
1697
1822
2101
$1128
1321
1440
1583
1684
1920
$1193
1398
1514
1675
1780
2033
$1410
1646
1764
1956
2081
2360
Product marked with this symbol available as GSA open market.
Class AC – GSA: Open Market
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
25
UniGroup Too Price List
Monolithic Fabric Add-On Panel
UniGroup Too
Actual
Height
Fabric
E2AM
NOTE:
This panel has fabric/
colorway restrictions,
see systems fabrics/
color legend.
26
April 2008 / USA
16′′(406mm)
Width
Number
Fabric Grade
A
B
C
D
E
F
G
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
E2AM-216
E2AM-3016
E2AM-316
E2AM-4216
E2AM-416
E2AM-516
$375
390
406
422
439
475
$463
478
516
532
549
585
$505
520
566
582
599
635
$515
530
578
594
611
647
$527
542
588
604
621
657
$537
552
600
616
633
669
$409
424
452
468
485
521
Features
To Order, Specify:
• Includes panel, vertical connector (bayonet), light block, side trim rails,
two full hinge sets and top cap clips.
• Fabric add-on panels may be installed above straight fabric and laminate
base or fabric add-on panels.
• Both sides in same fabric; one color or different color each side.
• For mixed fabric surfaces, specify fabric/color for each fabric surface and
price at higher grade.
• Each base panel will accept two add-on panels.
• Lower Level add-on panel will accept overhead components (load
bearing). Second add-on panel (top) is non-load bearing.
• Utilizes top cap from base panel.
• Same construction as UniGroup Too Basic Monolithic fabric panel.
1) Product number.
Specification Tips
• Add-on panels may be stacked a maximum of two high above a
UniGroup Too base panel.
• Add-on panel must match panel width.
• Combination of panel and add-on panel cannot exceed 80′′(2032mm) in
height.
• Cannot be used above doors or glazed panels.
• Base and add-on panel combinations should match existing base panel
heights so that end-of-runs and finish posts can be used without field
modification.
• Finish posts may be used, separately specified.
• Full-height side trim rails required for end-of-run conditions with a base
panel and one add-on panel, separately specified.
• For two high add-on panel applications specify separately full-height side
trim rail for base panel and one high add-on, for two high panel add-on
location use side trim rail that ships with add-on panel. See Specification
Guide for application guidelines.
• Clerestory can be added above fabric add-on panel. See Specification
Guide for application guidelines.
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Fabric/colorway for add-on panel side one.
3) Fabric/colorway for add-on panel side two.
4) Trim color for side trim rails and trim strip. $23
upcharge (list) for Metallic trim color.
UniGroup Too Price List
Glazed Add-On Panel
UniGroup Too
Actual
Height
Glazed
16′′(406mm)
Width
Number 1
Clear/Bronze/
Frosted Price
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
E2AG-216E2AG-3016E2AG-316E2AG-4216E2AG-416E2AG-516-
$562
583
607
628
652
681
Features
E2AG
• Includes panel, vertical connector (bayonet), light block, side
trim rails, two full hinge sets and top cap clips.
• Utilizes top cap from monolithic panel.
• Glazed add-on panels may be installed above glazed, fabric,
laminate, fabric add-on or glazed add-on panels.
• Glazed add-on panels will not accept any load bearing
components.
• Glazing material for English Reeded, Checks Mix, and
Vertical Moire is textured on one side only. Recommend
installing the textured side to face the interior of the
workstation.
English
Reeded Price
Checks Mix/
Vertical
Moire Price
$630
664
699
748
821
902
$ 726
759
795
855
944
1053
To Order, Specify:
1) Product number, including:
1 Application Designation:
F
Glazed add-on panel above
fabric base panel
G Glazed add-on panel above glazed or
glazed add-on panel, add $22 list
2) Glazing color or glass pattern.
3) Trim color for frame, side trim rails and trim
strip. $23 upcharge (list) for Metallic trim color.
Specification Tips
• Add-on panels may be stacked a maximum of two high above
a monolithic panel.
• Add-on panel width must match base panel width.
• Combination of base panel and add-on panel cannot exceed
80′′(2032mm).
• Cannot be used above doors.
• Does not accept top feed modules.
• Add-on panels may be retrofitted in the field for use on glazed
or fabric monolithic panels.
• To convert a glazed add-on above a fabric monolithic base
panel to a glazed add-on above a glazed base panel (vice
versa), a vertical connector (bayonet) retrofit kit is available.
Order separately through Haworth e-Parts.
• Finish posts may be used, separately specified.
• Full-height side trim rails required for end-of-run conditions
with a base panel and one add-on panel, separately
specified.
• For two high add-on panel applications specify separately
full-height side trim rail for base panel and one high add-on,
for two high panel add on location use side trim rail that ships
with add-on panel.
• Clerestory can be added above glazed add-on panel. See
Specification Guide for application guidelines.
Product marked with this symbol available as GSA open
market.
Class AC – GSA: Open Market
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
27
UniGroup Too Price List
Doors with Square Painted Top Cap
UniGroup Too
Actual
Height
Single Door — Laminate
80′′(2032mm)
Width
Number
36′′(914mm)
42′′(1067mm)
E2DS-3678-B
E2DS-4278-B
To Order, Specify:
• Includes complete panel assembly [hinge sets, carpet
gripper, door jamb, side rails, leveling glides and trim, hollow
core door (1 5/8′′(41mm) thick), door hinges, hardware,
brushed chrome knobs or ADA lever with lockset and keys,
and threshold].
• Door shipped with left-hand swing and can be field-changed
for right-hand swing.
• Both sides of door covered in same laminate surface color.
• No power/communications in base raceway.
1) Product number, including:
April 2008 / USA
$1774
1884
1 Handle Designation:
K Knob
H ADA Lever, add $145 list
2) Laminate surface color.
3) Trim color for raceway covers and glide
housings, $23 upcharge (list) for Metallic trim
color.
• Door may be placed a maximum of 24′′(610mm) from
supporting panels at 90В°.
• Will not accept add-on panel.
4) Trim color for door jamb, top cap and side trim
rails, $23 upcharge (list) for Metallic trim color.
Door Opening Clearance
NOTES:
Door Size
Height
Width
3678
78′′(1981mm)
28 3/4′′(730mm)
4278
78′′(1981mm)
34 3/4′′(883mm)
(Left-hand swing)
28
Price
L
L
Features
Specification Tips
E2DS
1
Some building codes may restrict the use of
panel heights greater than 69 ′′(1753mm).
Consult your local code authority to assure
that the furniture layout is compliant prior to
installation.
Most building codes for new buildings require
a minimum clear door width of 32 ′′(813mm).
To meet this requirement, the 42 ′′(1067mm)
door must be ordered.
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
if Panel Attached Screen
UniGroup Too
if Panel Attached Screen
Height
Width
Description
Number
Price
47′′(1194mm)
52′′(1321mm)
63′′(1600mm)
47′′(1194mm)
52′′(1321mm)
63′′(1600mm)
52′′(1321mm)
63′′(1600mm)
48′′(1219mm)
Fabric
48′′(1219mm)
Frosted Insert
48′′(1219mm)
Perforated Metal
BBP-4748-FH
BBP-5248-FH
BBP-6348-FH
BBP-4748-GH
BBP-5248-GH
BBP-6348-GH
BBP-5248-PH
BBP-6348-PH
$ 815
860
906
$ 999
1058
1116
$1087
1146
Features
BBP-FH
BBP-GH
BBP-PH
• Includes screen, two non-locking casters on post legs and
attachment brackets.
• Fabric and perforated metal insert screens have no acoustical
or tackable value.
• Screens are non-load bearing.
• Magnets can be used with perforated metal inserts.
• Frosted insert is identical to frosted and textured acrylic
material used in if desktop screens.
• Brackets are shipped unassembled.
Specification Tips
• Screens can mount on any width panel but panel runs must
be at least 48′′(1219mm).
• Screens mount on a panel taller than height of screen only.
• Screen adds 2′′(51mm) to panel width in stored position.
• Screen extends 42′′(1067mm) from end of panel in fully
extended position.
• Screens mount parallel with panel, off panel end only.
• Screen adds 2′′(51mm) to panel thickness.
• Bracket is panel specific for UniGroup Too, UniGroup and
PLACES.
• Panel attached screen brackets may interfere with
components mounted to opposite side of panel.
• Fabric screen insert available in warm and cool neutral only.
• Screens are non-handed; brackets can be attached to either
side.
• See Specification Guide for additional information.
Class IF – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
To Order, Specify:
Fabric Insert
1) Product number.
2) Screen fabric insert color.
FB-1 Warm Neutral
FB-2 Cool Neutral
3) Metallic trim color for frame.
4) Trim color for panel attachment brackets.
5) Trim color for casters.
Frosted Insert
1) Product number.
2) Trim color for frame.
3) Trim color for panel attachment brackets.
4) Metallic trim color for casters.
5) Metal trim color for casters.
Metal Insert
1) Product number.
2) Trim color for frame.
3) Trim color for perforated metal insert.
4) Trim color for panel attachment brackets.
5) Metallic trim color for casters.
April 2008 / USA
29
UniGroup Too Price List
Panel Accessories
UniGroup Too
90° Full-Height Finish Post —
Square Painted Top Cap
Actual
Height
Number
32′′(813mm)
40′′(1016mm)
48′′(1219mm)
56′′(1422mm)
64′′(1626mm)
72′′(1829mm)
80′′(2032mm)
E2
E2
E2
E2
E2
E2
E2
1
C-30
C-38
C-46
C-54
C-62
C-70
C-78
Painted
Price
Fabric
Price
$68
72
76
80
84
88
92
$70
74
78
82
86
90
94
Feature
To Order, Specify:
• Includes 90° vertical cover, square painted top cap and base
raceway cover.
1) Product number, including:
1 Surface Finish:
Specification Tips
• For use with equal height panels in a 90°, 2-Way condition.
• For use with UniGroup Too square painted top cap panels.
• Required by UL for covering base raceway flexible and
Straight power connectors when power connector covers are
not used.
E2FC
E2PC
P
Painted
F
Fabric
2) Paint or fabric color for finish post. $14
upcharge (list) for Metallic trim color.
3) Trim color for raceway cover. $14 upcharge
(list) for Metallic trim color.
4) Trim color for top cap. $14 upcharge (list) for
Metallic trim color.
90° Variable-Height Finish Post 32′′(813mm)
40′′(1016mm)
— Square Painted Top Cap
E2
E2
E2
E2
E2
E2
48′′(1219mm)
56′′(1422mm)
64′′(1626mm)
72′′(1829mm)
C-30-V
C-38-V
C-46-V
C-54-V
C-62-V
C-70-V
$ 80
84
88
92
96
100
$ 82
86
90
94
98
102
Feature
To Order, Specify:
• Includes 90° vertical cover, square painted top cap and base
raceway cover.
1) Product number, including:
1 Surface Finish:
Specification Tips
• For use with multiple height panels in a 90°, 2-Way condition;
specify height to match lowest panel height.
• For use with UniGroup Too square painted top cap panels.
• Required by UL for covering base raceway power connectors
when power connector covers are not used.
E2FC-V
E2PC-V
Painted
F
Fabric
2) Paint or fabric color for finish post. $14
upcharge (list) for Metallic trim color.
3) Trim color for raceway cover. $14 upcharge
(list) for Metallic trim color.
4) Trim color for top cap. $14 upcharge (list) for
Metallic trim color.
90° Power Connector Cover —
Square Profile
E2PC-90-B
30
P
April 2008 / USA
Height
Number
Price
4′′(102mm)
E2PC-90-B
$52
Features
To Order, Specify:
• Includes six covers.
• For use with UniGroup Too square painted top cap panels.
• Required by UL for covering power connector 90° panel
condition when finish post is not used.
1) Product number.
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Trim color. $13 upcharge (list) for Metallic trim
color.
UniGroup Too Price List
Panel Accessories
UniGroup Too
120° Full-Height Finish Post —
Square Painted Top Cap
Actual
Height
Number
32′′(813mm)
40′′(1016mm)
48′′(1219mm)
56′′(1422mm)
64′′(1626mm)
72′′(1829mm)
80′′(2032mm)
E2
E2
E2
E2
E2
E2
E2
1
A-30
A-38
A-46
A-54
A-62
A-70
A-78
Painted
Price
Fabric
Price
$71
75
79
83
87
91
95
$75
80
83
87
91
95
99
Feature
To Order, Specify:
• Includes 120° vertical cover, square painted top cap and base
raceway cover.
1) Product number, including:
1 Surface Finish:
Specification Tips
• For use with equal height panels in a 120°, 2-Way condition.
• For use with UniGroup Too square top cap panels.
• Required by UL for covering base raceway power connectors
when power connector covers are not used.
Painted
F
Fabric
2) Paint or fabric color for finish post. $14
upcharge (list) for Metallic trim color.
3) Trim color for raceway cover. $14 upcharge
(list) for Metallic trim color.
E2FA
E2PA
120В° Variable-Height Finish
Post — Square Painted
Top Cap
P
3) Trim color for top cap. $14 upcharge (list) for
Metallic trim color.
32′′(813mm)
40′′(1016mm)
48′′(1219mm)
56′′(1422mm)
64′′(1626mm)
72′′(1829mm)
E2
E2
E2
E2
E2
E2
A-30-V
A-38-V
A-46-V
A-54-V
A-62-V
A-70-V
$ 83
87
91
95
99
103
$ 87
92
95
99
103
107
Feature
To Order, Specify:
• Includes 120° vertical cover, square painted top cap and base
raceway cover.
1) Product number, including:
1 Surface Finish:
Specification Tips
• For use with multiple height panels in a 120°, 2-Way
condition; specify height to match lowest panel height.
• For use with UniGroup Too square painted top cap panels.
• Required by UL for covering base raceway power connectors
when power connector covers are not used.
Painted
F
Fabric
2) Paint or fabric color for finish post. $14
upcharge (list) for Metallic trim color.
3) Trim color for raceway cover. $14 upcharge
(list) for Metallic trim color.
4) Trim color for top cap. $14 upcharge (list) for
Metallic trim color.
E2FA-V
E2PA-V
120В° Power Connector Cover
P
Height
Number
Price
4′′(102mm)
E2PC-120-B
$52
Features
To Order, Specify:
• Includes six covers.
• For use with UniGroup Too square painted top cap panels.
• Required by UL for covering power connector 120° panel
condition when finish post is not used.
1) Product number.
2) Trim color. $13 upcharge (list) for Metallic trim
color.
E2PC-120-B
Specification Tip
• Can also be used with UniGroup and PLACES.
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
31
UniGroup Too Price List
Panel Accessories
UniGroup Too
180° Full-Height Finish Post —
Square Painted Top Cap
Actual
Height
Number
32′′(813mm)
40′′(1016mm)
48′′(1219mm)
56′′(1422mm)
64′′(1626mm)
72′′(1829mm)
80′′(2032mm)
E2
E2
E2
E2
E2
E2
E2
1
S-30
S-38
S-46
S-54
S-62
S-70
S-78
Painted
Price
Fabric
Price
$55
64
69
70
72
76
81
$57
66
71
72
74
80
84
Feature
To Order, Specify:
• Includes 180° vertical cover, square painted top cap and base
raceway cover.
1) Product number, including:
1 Surface Finish:
Specification Tips
• For use with equal height panels in a 180°, 3-Way condition.
• For use with panels with UniGroup Too square painted top
cap.
• Required by UL for covering base raceway power
connectors when power connector covers are not used.
E2FS
E2PS
Painted
F
Fabric
2) Paint or fabric color for finish post. $14
upcharge (list) for Metallic trim color.
3) Trim color for raceway cover. $14 upcharge
(list) for Metallic trim color.
4) Trim color for top cap. $14 upcharge (list) for
Metallic trim color.
180В° Variable-Height Finish
Post — Square Painted
Top Cap
32′′(813mm)
E2
E2
E2
E2
E2
E2
E2
E2
E2
E2
E2
E2
E2
E2
E2
E2
E2
E2
40′′(1016mm)
48′′(1219mm)
56′′(1422mm)
64′′(1626mm)
72′′(1829mm)
E2FS-V
ELPS-V
S-30-V1
S-30-V2I
S-30-V2L
S-38-V1
S-38-V2I
S-38-V2L
S-46-V1
S-46-V2I
S-46-V2L
S-54-V1
S-54-V2I
S-54-V2L
S-62-V1
S-62-V2I
S-62-V2L
S-70-V1
S-70-V2I
S-70-V2L
-V1
-V2I
April 2008 / USA
-V2L
$67
67
67
$76
76
76
$81
81
81
$82
82
82
$84
84
84
$88
88
88
$69
69
69
$78
78
78
$83
83
83
$84
84
84
$86
86
86
$92
92
92
Features
To Order, Specify:
• Includes 180° vertical cover, square painted top cap and base
raceway cover.
• Includes top cap with one or two alignment tabs; specify
accordingly.
1) Product number, including:
Specification Tips
32
P
• For use with multiple height panels in a 180°, 3-Way
condition; specify height to match lowest panel height.
• Product specification must reflect number of top cap
alignment tabs for lowest like panel heights in an ��I’’ or ��L’’
condition; see Product Application Guidelines for details.
• Top cap alignment tabs are for dedicated applications and
are not field removable; -V1, -V2I, -V2L.
• For use with panels with UniGroup Too square painted top
cap.
• Required by UL for covering base raceway power connectors
when power connector covers are not used.
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
1 Surface Finish:
P
Painted
F
Fabric
2) Paint or fabric color for finish post. $14
upcharge (list) for Metallic trim color.
3) Trim color for raceway cover. $14 upcharge
(list) for Metallic trim color.
4) Trim color for top cap. $14 upcharge (list) for
Metallic trim color.
UniGroup Too Price List
Panel Accessories
UniGroup Too
180В° Power Connector Cover
PPC-180-B
180В° Vertical Cover only,
(no top cap or base raceway
cover)
Height
Number
Price
4′′(102mm)
PCC-180-B
$55
Features
To Order, Specify:
• Includes six covers.
• For use with UniGroup Too square painted top cap panels.
• Required by UL for covering power connector 180° panel
condition when finish post is not used.
1) Product number.
Specification Tip
• Can also be used with UniGroup and PLACES.
Actual
Height
Number
8′′(203mm)
16′′(406mm)
24′′(610mm)
32′′(813mm)
40′′(1016mm)
48′′(1219mm)
E2
E2
E2
E2
E2
E2
1
S-08-N
S-16-N
S-24-N
S-32-N
S-40-N
S-48-N
Painted
Price
Fabric
Price
$20
25
30
35
44
49
$22
27
32
37
46
51
Feature
To Order, Specify:
• Includes 180° vertical cover only.
1) Product number, including:
Specification Tips
1 Surface Finish:
• For use with separately specified 180° finish post or 90° top
cap.
• See Specification Guide for details.
E2PS
E2FS
P
Painted
F
Fabric
2) Paint or fabric color for finish post. $13
upcharge (list) for Metallic trim color.
90В° Square Painted Top Cap
for 2-Way, 3-Way, 4-Way
E2CC-90
2) Trim color. $13 upcharge (list) for Metallic trim
color.
Number
Price
E2CC-90-1
E2CC-90-2I
E2CC-90-2L
E2CC-90-3
E2CC-90-4
$40
40
40
40
40
Features
To Order, Specify:
• Includes square painted top cap for 90° or 180° panel
intersection.
• Includes one, two, three, or four alignment tabs; specify
accordingly.
1) Product number.
2) Trim color. $14 upcharge (list) for Metallic trim
color.
Specification Tips
• Typically used with separately specified 180° Vertical Cover
unless used in a 4-way condition with equal height panels.
• Product specification must reflect number of top cap
alignment tabs for like panel heights in an ��I’’, ��L’’, ��T’’, or ��X’’
condition.
• See Product Specification Guide for details.
• Top cap alignment tabs are for dedicated applications and
are not field removable.
-1
-2I
-2L
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
-3
-4
April 2008 / USA
33
UniGroup Too Price List
Panel Accessories
UniGroup Too
120В° Square Painted Top Cap
for 2-Way or 3-Way
Number
Price
E2CA-120-1
E2CA-120-2
E2CA-120-3
$40
40
40
Features
To Order, Specify:
• Includes square painted top cap for 120° panel intersection.
• Includes one, two or three alignment tabs; specify
accordingly.
1) Product number.
2) Trim color. $14 upcharge (list) for Metallic trim
color.
Specification Tips
E2CA-120
• Product specification must reflect number of top cap
alignment tabs for like panel heights in 120В° 2-Way or 3-Way
condition.
• For use in 120° 3-Way condition with equal height panels;
specify (-3) option.
• For use in 120° 3-way condition with one high and two equal
height lower panels; specify (-2) option.
• See Product Specification Guide for details.
• Top cap alignment tabs are for dedicated applications and
are not field removable.
• Not for use with the 180° Vertical Cover.
-1
34
April 2008 / USA
-2
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
-3
UniGroup Too Price List
Panel Accessories
UniGroup Too
Number
Price
UniGroup Too Top Cap Aligner E2AL-1
Features
$22
• Includes one top cap aligner.
• For use with UniGroup Too square painted top cap in an
in-line panel condition.
• Top cap alignment tabs are for dedicated applications and not
field removeable.
To Order, Specify:
1) Product number.
2) Trim color. $13 upcharge (list) for Metallic trim
color.
Note: One top cap aligner is included with each panel.
E2AL-1
Class AC
UniGroup Too Top Cap
End Plug
E2EC-1
$16
Features
• Includes one top cap and end plug.
• For use with UniGroup Too square top cap panels.
• Additional top cap end plugs may be needed if finish posts
are not specified.
To Order, Specify:
1) Product number.
2) Trim color. $6 upcharge (list) for Metallic trim
color.
Note: .6 top cap end plugs are included with each panel.
Order additional as necessary.
E2EC-1
Class AC
Base Raceway End Cap
Height
Number
4′′(102mm)
EC-10-B
Price
$18
Features
To Order, Specify:
• Includes ten end caps.
• For use at base raceway for end-of-run panel condition.
1) Product number.
Note: .6 end caps included with every panel.
Order additional as necessary.
2) Trim color. $14 upcharge (list) for Metallic trim
color.
EC-10-B
Class AA
SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
35
UniGroup Too Price List
Panel Accessories
UniGroup Too
Full Height Side Trim Rail —
for use with Add-On Panels
Height
Base Panel Height/
Add-On Panel
Number
Price
48′′(1219mm)
56′′(1422mm)
64′′(1626mm)
72′′(1829mm)
80′′(2032mm)
32′′(813mm)/16′′(406mm)
40′′(1016mm)/16′′(406mm)
48′′(1219mm)/16′′(406mm)
56′′(1422mm)/16′′(406mm)
64′′(1626mm)/16′′(406mm)
SREH-3016
SREH-3816
SREH-4616
SREH-5416
SREH-6216
$55
73
77
85
87
Feature
To Order, Specify:
• Includes one full height side trim rail.
1) Product number.
Specification Tips
2) Trim color. $14 upcharge (list) for Metallic trim
color.
• For use with base panel and one add-on panel.
• For two high add-on panel applications specify separately
full-height side trim rail for base panel and one high add-on,
for two high panel location use side trim rail that ships with
add-on panel. See Specification Guide for application
guidelines.
SREH
Side Trim Rail
SRE
Panel Height
Number
Price
32′′(813mm)
40′′(1016mm)
48′′(1219mm)
56′′(1422mm)
64′′(1626mm)
72′′(1829mm)
80′′(2032mm)
SRE-30
SRE-38
SRE-46
SRE-54
SRE-62
SRE-70
SRE-78
$56
56
63
63
67
72
74
Feature
To Order, Specify:
• Includes one side trim rail.
1) Product number.
Specification Tips
2) Trim color. $14 upcharge (list) for Metallic trim
color.
• Specify two side trim rails for each condition.
• Two side trim rails are included with each panel. Order as
replacement only.
• For use with UniGroup Too panels only.
36
April 2008 / USA
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Panel Accessories
UniGroup Too
Hinges
Panel Height
Number
Price
32′′(813mm)
40′′(1016mm)
48′′(1219mm)
56′′(1422mm)
64′′(1626mm)
72′′(1829mm)
80′′(2032mm)
HE-30
HE-38
HE-46
HE-54
HE-62
HE-70
HE-78
$ 9
9
11
11
12
15
16
Features
To Order, Specify:
• Includes one hinge set for one side of trim rail.
• One hinge set connects every two panels for angular
connections.
• Two hinge sets are used for straight-line conditions.
• For replacement only. Hinges are included with panels.
1) Product number.
2) Trim color.
HE
Specification Tip
• For use with UniGroup Too panels only.
Wall Track
WT
Wall Mount Kit
WMK
Height
Depth
Width
Number
Price
60′′(1524mm)
72′′(1829mm)
84′′(2134mm)
3/4′′(19mm)
5/8′′(16mm)
WT-60
WT-72
WT-84
$101
123
137
Features
To Order, Specify:
• Includes two wall tracks and attachment screws
(#10 2 1/2′′ long).
• For attachment of components to structural walls.
• See installation instructions for proper mounting.
1) Product number.
Specification Tip
2) Trim color for screws. $13 upcharge (list) for
Metallic trim color.
3) Trim color for track. $13 upcharge (list) for
Metallic trim color.
• Not for use with up-mount overhead storage unit.
Height
Number
Price
32′′(813mm)
40′′(1016mm)
48′′(1219mm)
56′′(1422mm)
64′′(1626mm)
72′′(1829mm)
80′′(2032mm)
WMK-32
WMK-38
WMK-46
WMK-54
WMK-62
WMK-70
WMK-78
$ 58
69
79
88
102
128
130
Features
To Order, Specify:
• Includes wall-mount channel, hinges and screws.
• For mounting panels, with or without add-on panel, to a
structural wall.
• Adds 1/4′′(6mm) to the panel width.
1) Product number.
2) Trim color. $14 upcharge (list) for Metallic trim
color.
Specification Tip
• Must be properly anchored to a structural wall.
Class AA SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
37
UniGroup Too Price List
Panel Accessories
UniGroup Too
T-Mount Kits
E2TK
Class AC
Height
Number
Price
32′′(813mm)
40′′(1016mm)
48′′(1219mm)
56′′(1422mm)
64′′(1626mm)
72′′(1829mm)
80′′(2032mm)
E2TK-30
E2TK-38
E2TK-46
E2TK-54
E2TK-62
E2TK-70
E2TK-78
$ 78
83
96
105
110
128
130
Features
To Order, Specify:
• Includes pre-drilled side rail, center-mount brackets,
end-mount brackets, light block extrusions, glide housing, and
screws.
• Brackets included for both center- and end-mount
T-conditions.
• Connects two panels in a T-condition. T-mount can attach to
a base panel and one fabric add-on panel. Configuration
coming off of a T-mount cannot contain add-on panels.
1) Product number.
2) Trim color. $14 upcharge (list) for Metallic trim
color.
Specification Tips
• Both panels in a T-mount condition must be of equal height.
• Cannot mount on glazed panels, glazed add-on panels or
doors.
• Must be used with UniGroup Too panels only.
E2CH-8
Coat Hook
$81
Features
To Order, Specify:
• Includes eight hooks.
• For use with UniGroup Too square painted top cap panels.
1) Product number.
2) Trim color. $14 upcharge (list) for Metallic trim
color.
E2CH-8
Class AC
HAB-0001
Seismic Anchoring Bracket
$125
Features
To Order, Specify:
• Includes package of six formed steel brackets.
• For seismic anchoring of UniGroup Too, UniGroup and
PLACES panels.
1) Product number.
(No finish specification required.)
HAB
Class BA
7031-0501
Friction Pad
Feature
To Order, Specify:
• Includes six pads.
1) Product number.
(No finish specification required.)
Specification Tip
• Attaches to bottom of glide to prevent movement of panels on
hard surface flooring.
7031-0501
Class BA
2/90 Sign Systems
2/90 Sign Systems is a recommended signage
program for use with Haworth Systems. Signage
options include ADA-compliant panel-mounted
name signs, department signs, building directories,
in/out boards, restroom and no smoking signs.
For inquiries, catalogs or orders, contact System
2/90 directly at 1-800-777-4310, fax (616) 656-4300,
P.O. Box 888289, Grand Rapids, MI 49588-8289.
38
April 2008 / USA
$6
SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Panel Accessories – Retrofit Kits
for use with UniGroup Too and UniGroup Panels
Square Painted Top Caps
For UniGroup Too and
UniGroup Fabric and Laminate
Panels, UniGroup Too Fabric
Add-On Panels and Legacy
UniGroup Videne Panels
E2TS-U
Width
Number
Price
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
E2TS-12-U
E2TS-18-U
E2TS-24-U
E2TS-30-U
E2TS-36-U
E2TS-42-U
E2TS-48-U
E2TS-54-U
E2TS-60-U
$42
47
52
57
62
67
72
79
84
Feature
To Order, Specify:
• Includes square painted top cap, clips, aligner, and .6 end
caps.
1) Product number.
Specification Tips
2) Trim color. $13 upcharge (list) for Metallic trim
color.
• To be used with straight top cap panels only.
• Not to be used with UniGroup expanded top cap raceway.
Square Painted Top Caps
For UniGroup Too and UniGroup
Doors and Glazed Panels,
UniGroup Open-Frame Panels,
UniGroup Too Glazed Add-On
Panels, and UniGroup Glazed
and FabricAdd-OnPanels
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
E2TS-12-T
E2TS-18-T
E2TS-24-T
E2TS-30-T
E2TS-36-T
E2TS-42-T
E2TS-48-T
E2TS-54-T
E2TS-60-T
Feature
To Order, Specify:
• Includes square painted top cap, clips, aligner, and .6 end
caps.
1) Product number.
Specification Tips
E2TS-T
• To be used with straight top cap panels only.
• Not to be used with UniGroup expanded top cap raceway.
Trim Strip for UniGroup Fabric
and Glazed Add-On Panels
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
E2UR-A
$42
47
52
57
62
67
72
79
84
2) Trim color. $13 upcharge (list) for Metallic trim
color.
E2UR-12-A
E2UR-18-A
E2UR-24-A
E2UR-30-A
E2UR-36-A
E2UR-42-A
E2UR-48-A
E2UR-54-A
E2UR-60-A
$20
20
22
28
30
32
34
34
38
Feature
To Order, Specify:
• Includes trim strip.
1) Product number.
Specification Tip
2) Trim color. $13 upcharge (list) for Metallic trim
color.
• Used to retrofit existing fabric and glazed add-on panels to
match aesthetic appearance of UniGroup Too.
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refertohaworth.com/Canada
April 2008 / USA
39
UniGroup Too Price List
Panel Accessories – Retrofit Kits
for use with UniGroup Panels
90° Full-Height Finish Post —
Square Painted Top Cap
Actual
Height
Number
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
U2
U2
U2
U2
U2
U2
U2
U2
1
C-28
C-35
C-42
C-48
C-54
C-62
C-66
C-80
Painted
Price
Fabric
Price
$ 83
85
87
93
97
98
108
110
$ 85
88
90
97
99
101
111
114
Feature
To Order, Specify:
• Includes 90° vertical cover, square painted top cap and base
raceway cover.
1) Product number, including:
1 Surface Finish:
Specification Tips
• For use with equal height UniGroup panels in a 90°, 2-Way
condition with UniGroup Too square painted top cap.
• To be used with straight top cap panels only.
• Required by UL for covering base raceway power connectors
when power connector covers are not used.
U2FC
U2PC
P
Painted
F
Fabric
2) Paint or fabric color for finish post. $13
upcharge (list) for Metallic trim color.
3) Trim color for raceway cover. $13 upcharge
(list) for Metallic trim color.
4) Trim color for top cap. $13 upcharge (list) for
Metallic trim color.
90° Variable-Height Finish Post 30′′(762mm)
37′′(940mm)
— Square Painted Top Cap
U2
U2
U2
U2
U2
U2
U2
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
C-28-V
C-35-V
C-42-V
C-48-V
C-54-V
C-62-V
C-66-V
$ 95
97
99
105
109
110
120
$ 97
100
102
109
111
113
123
Feature
To Order, Specify:
• Includes 90° vertical cover, square painted top cap and base
raceway cover.
1) Product number, including:
1 Surface Finish:
Specification Tips
U2FC-V
U2PC-V
• For use with multiple height UniGroup panels in a 90°, 2-Way
condition; specify height to match lowest panel height with
UniGroup Too square painted top cap.
• To be used with straight top cap panels only.
• Required by UL for covering base raceway power connectors
when power connector covers are not used.
P
Painted
F
Fabric
2) Paint or fabric color for finish post. $13
upcharge (list) for Metallic trim color.
3) Trim color for raceway cover. $13 upcharge
(list) for Metallic trim color.
4) Trim color for top cap. $13 upcharge (list) for
Metallic trim color.
40
April 2008 / USA
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refertohaworth.com/Canada
UniGroup Too Price List
Panel Accessories – Retrofit Kits
for use with UniGroup Panels
120° Full-Height Finish Post —
Square Painted Top Cap
Actual
Height
Number
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
U2
U2
U2
U2
U2
U2
U2
U2
1
A-28
A-35
A-42
A-48
A-54
A-62
A-66
A-80
Painted
Price
Fabric
Price
$ 95
100
104
110
111
113
124
127
$ 99
104
107
113
115
116
128
131
Feature
To Order, Specify:
• Includes 120° vertical cover, square painted top cap and base
raceway cover.
1) Product number, including:
1 Surface Finish:
Specification Tips
U2FA
U2PA
• For use with equal height UniGroup panels in a 120°, 2-Way
condition with UniGroup Too square painted top cap.
• To be used with straight top cap panels only.
• Required by UL for covering base raceway power connectors
when power connector covers are not used.
P
Painted
F
Fabric
2) Paint or fabric color for finish post. $13
upcharge (list) for Metallic trim color.
3) Trim color for raceway cover. $13 upcharge
(list) for Metallic trim color.
4) Trim color for top cap. $13 upcharge (list) for
Metallic trim color.
120В° Variable-Height Finish
Post — Square Painted
Top Cap
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
U2
U2
U2
U2
U2
U2
U2
A-28-V
A-35-V
A-42-V
A-48-V
A-54-V
A-62-V
A-66-V
$107
112
116
122
123
125
136
$111
116
119
125
127
128
140
Feature
To Order, Specify:
• Includes 120° vertical cover, square painted top cap and base
raceway cover.
1) Product number, including:
1 Surface Finish:
Specification Tips
• For use with multiple height UniGroup panels in a 120°,
2-Way condition; specify height to match lowest panel height
with UniGroup Too square painted top cap.
• To be used with straight top cap panels only.
• Required by UL for covering base raceway power connectors
when power connector covers are not used.
U2FA-V
U2PA-V
P
Painted
F
Fabric
2) Paint or fabric color for finish post. $13
upcharge (list) for Metallic trim color.
3) Trim color for raceway cover. $13 upcharge
(list) for Metallic trim color.
4) Trim color for top cap. $13 upcharge (list) for
Metallic trim color.
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refertohaworth.com/Canada
April 2008 / USA
41
UniGroup Too Price List
Panel Accessories – Retrofit Kits
for use with UniGroup Panels
180° Full-Height Finish Post —
Square Painted Top Cap
Actual
Height
Number
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
U2
U2
U2
U2
U2
U2
U2
U2
1
S-28
S-35
S-42
S-48
S-54
S-62
S-66
S-80
Painted
Price
Fabric
Price
$ 68
74
79
85
86
89
93
100
$ 70
77
82
88
89
91
97
104
Feature
To Order, Specify:
• Includes 180° vertical cover, square painted top cap and base
raceway cover.
1) Product number, including:
1 Surface Finish:
Specification Tips
• For use with equal height UniGroup panels in a 180°, 3-Way
condition with UniGroup Too square painted top cap.
• To be used with straight top cap panels only.
• Required by UL for covering base raceway power connectors
when power connector covers are not used.
U2FS
U2PS
P
Painted
F
Fabric
2) Paint or fabric color for finish post. $13
upcharge (list) for Metallic trim color.
3) Trim color for raceway cover. $13 upcharge
(list) for Metallic trim color.
4) Trim color for top cap. $13 upcharge (list) for
Metallic trim color.
42
April 2008 / USA
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refertohaworth.com/Canada
UniGroup Too Price List
Panel Accessories – Retrofit Kits
for use with UniGroup Panels
180В° Variable-Height Finish
Post — Square Painted
Top Cap
Actual
Height
Number
30′′(762mm)
U2
U2
U2
U2
U2
U2
U2
U2
U2
U2
U2
U2
U2
U2
U2
U2
U2
U2
U2
U2
U2
U2
1
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
U2FS-V
U2PS-V
68′′(1727mm)
82′′(2083mm)
-V1
-V2I
-V2L
S-28-V1
S-28-V2I
S-28-V2L
S-35-V1
S-35-V2I
S-35-V2L
S-42-V1
S-42-V2I
S-42-V2L
S-48-V1
S-48-V2I
S-48-V2L
S-54-V1
S-54-V2I
S-54-V2L
S-62-V1
S-62-V2I
S-62-V2L
S-66-V1
S-66-V2I
S-66-V2L
S-80-V2I
Painted
Price
Fabric
Price
$ 80
80
80
$ 86
86
86
$ 91
91
91
$ 97
97
97
$ 98
98
98
$101
101
101
$105
105
105
$112
$ 82
82
82
$ 89
89
89
$ 94
94
94
$100
100
100
$101
101
101
$103
103
103
$109
109
109
$116
Features
To Order, Specify:
• Includes 180° vertical cover, square painted top cap and base
raceway cover.
• Includes top cap with one or two alignment tabs; specify
accordingly.
1) Product number, including:
Specification Tips
• For use with multiple height UniGroup panels in a 180°,
3-Way condition with UniGroup Too square painted top cap;
specify height to match lowest panel height except in V2I
condition.
• To be used with straight top cap panels only.
• Product specification must reflect number of top cap
alignment tabs for lowest like panel heights in an ��I’’ or ��L’’
condition; refer to UniGroup Too Application Guidelines.
• Top cap alignment tabs are for dedicated applications and
are not field removable; -V1, -V2I, -V2L.
• Required by UL for covering base raceway power connectors
when power connector covers are not used.
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refertohaworth.com/Canada
1 Surface Finish:
P
Painted
F
Fabric
2) Paint or fabric color for finish post. $13
upcharge (list) for Metallic trim color.
3) Trim color for raceway cover. $13 upcharge
(list) for Metallic trim color.
4) Trim color for top cap. $13 upcharge (list) for
Metallic trim color.
April 2008 / USA
43
UniGroup Too Price List
Panel Accessories – Retrofit Kits
for use with PLACES Panels
Square Painted Top Caps
For all PLACES doors and panel
types except Legacy Gabled,
ObliqueandExpanded
E2TS-P
Width
Number
Price
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
E2TS-12-P
E2TS-18-P
E2TS-24-P
E2TS-30-P
E2TS-36-P
E2TS-42-P
E2TS-48-P
E2TS-54-P
E2TS-60-P
$42
47
52
57
62
67
72
79
84
Feature
To Order, Specify:
• Includes square painted top cap, clips, aligner, and .6 end
caps.
1) Product number.
Specification Tip
• To be used with straight top cap panels only.
44
April 2008 / USA
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refertohaworth.com/Canada
2) Trim color. $13 upcharge (list) for Metallic trim
color.
UniGroup Too Price List
Panel Accessories – Retrofit Kits
for use with PLACES Panels
90° Full-Height Finish Post —
Square Painted Top Cap
Actual
Height
Number
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
H2
H2
H2
H2
H2
H2
H2
H2
1
C-30
C-37
C-44
C-50
C-56
C-64
C-68
C-82
Painted
Price
Fabric
Price
$ 88
91
96
102
104
107
112
116
$ 91
93
100
105
107
110
117
119
Feature
To Order, Specify:
• Includes 90° vertical cover, square painted top cap and base
raceway cover.
1) Product number, including:
1 Surface Finish:
Specification Tips
H2FC
H2PC
• For use with equal height PLACES panels in a 90°, 2-Way
condition with UniGroup Too square painted top cap.
• Not for use with legacy expanded panels.
• To be used with straight top cap panels only.
• Required by UL for covering base raceway flexible and
Straight power connectors when power connector covers are
not used.
P
Painted
F
Fabric
2) Paint or fabric color for finish post. $13
upcharge (list) for Metallic trim color.
3) Trim color for raceway cover. $13 upcharge
(list) for Metallic trim color.
4) Trim color for top cap. $13 upcharge (list) for
Metallic trim color.
90В° Variable-Height Finish
Post — Square Painted
Top Cap
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
H2
H2
H2
H2
H2
H2
H2
C-30-V
C-37-V
C-44-V
C-50-V
C-56-V
C-64-V
C-68-V
$100
103
108
114
116
119
124
$103
105
112
117
119
122
129
Feature
To Order, Specify:
• Includes 90° vertical cover, square painted top cap and base
raceway cover.
1) Product number, including:
1 Surface Finish:
Specification Tips
H2FC-V
H2PC-V
• For use with multiple height PLACES panels in a 90°, 2-Way
condition; specify height to match lowest panel height with
UniGroup Too square painted top cap.
• Not for use with legacy expanded panels.
• To be used with straight top cap panels only.
• Required by UL for covering base raceway power connectors
when power connector covers are not used.
P
Painted
F
Fabric
2) Paint or fabric color for finish post. $13
upcharge (list) for Metallic trim color.
3) Trim color for raceway cover. $13 upcharge
(list) for Metallic trim color.
4) Trim color for top cap. $13 upcharge (list) for
Metallic trim color.
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refertohaworth.com/Canada
April 2008 / USA
45
UniGroup Too Price List
Panel Accessories – Retrofit Kits
for use with PLACES Panels
120° Full-Height Finish Post —
Square Painted Top Cap
Actual
Height
Number
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
H2
H2
H2
H2
H2
H2
H2
H2
1
A-30
A-37
A-44
A-50
A-56
A-64
A-68
A-82
Painted
Price
Fabric
Price
$ 98
103
106
112
113
116
127
130
$102
106
109
116
118
119
131
134
Feature
To Order, Specify:
• Includes 120° vertical cover, square painted top cap and base
raceway cover.
1) Product number, including:
1 Surface Finish:
Specification Tips
• For use with equal height PLACES panels in a 120°, 2-Way
condition with UniGroup Too square painted top cap.
• Not for use with legacy expanded panels.
• To be used with straight top cap panels only.
• Required by UL for covering base raceway power connectors
when power connector covers are not used.
H2FA
H2PA
P
Painted
F
Fabric
2) Paint or fabric color for finish post. $13
upcharge (list) for Metallic trim color.
3) Trim color for raceway cover. $13 upcharge
(list) for Metallic trim color.
4) Trim color for top cap. $13 upcharge (list) for
Metallic trim color.
120В° Variable-Height Finish
Post — Square Painted
Top Cap
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
H2
H2
H2
H2
H2
H2
H2
A-30-V
A-37-V
A-44-V
A-50-V
A-56-V
A-64-V
A-68-V
$110
115
118
124
125
128
139
$114
118
121
128
130
131
143
Feature
To Order, Specify:
• Includes 120° vertical cover, square painted top cap and base
raceway cover.
1) Product number, including:
1 Surface Finish:
Specification Tips
• For use with multiple height PLACES panels in a 120°, 2-Way
condition; specify height to match lowest panel height with
UniGroup Too square painted top cap.
• Not for use with legacy expanded panels.
• To be used with straight top cap panels only.
• Required by UL for covering base raceway power connectors
when power connector covers are not used.
H2FA-V
H2PA-V
46
P
Painted
F
Fabric
2) Paint or fabric color for finish post. $13
upcharge (list) for Metallic trim color.
3) Trim color for raceway cover. $13 upcharge
(list) for Metallic trim color.
4) Trim color for top cap. $13 upcharge (list) for
Metallic trim color.
April 2008 / USA
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refertohaworth.com/Canada
UniGroup Too Price List
Panel Accessories – Retrofit Kits
for use with PLACES Panels
180° Full-Height Finish Post —
Square Painted Top Cap
Actual
Height
Number
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
H2
H2
H2
H2
H2
H2
H2
H2
1
S-30
S-37
S-44
S-50
S-56
S-64
S-68
S-82
Painted
Price
Fabric
Price
$ 75
82
86
91
95
97
102
110
$ 78
85
88
93
98
101
105
113
Feature
To Order, Specify:
• Includes 180° vertical cover, top cap and base raceway
cover.
1) Product number, including:
1 Surface Finish:
Specification Tips
H2FS
H2PS
• For use with equal height PLACES panels in a 180°, 3-Way
condition with UniGroup Too square painted top cap.
• Not for use with legacy expanded panels.
• To be used with straight top cap panels only.
• Required by UL for covering base raceway power connectors
when power connector covers are not used.
P
Painted
F
Fabric
2) Paint or fabric color for finish post. $13
upcharge (list) for Metallic trim color.
3) Trim color for raceway cover. $13 upcharge
(list) for Metallic trim color.
4) Trim color for top cap. $13 upcharge (list) for
Metallic trim color.
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refertohaworth.com/Canada
April 2008 / USA
47
UniGroup Too Price List
Panel Accessories – Retrofit Kits
for use with PLACES Panels
Actual
Height
Number
1
180В° Variable-Height Finish
30′′(762mm)
Post — Square Painted Top Cap
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
H2
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
H2FS-V
H2PS-V
68′′(1727mm)
82′′(2083mm)
-V1
-V2I
-V2L
S-30-V1
S-30-V2I
S-30-V2L
S-37-V1
S-37-V2I
S-37-V2L
S-44-V1
S-44-V2I
S-44-V2L
S-50-V1
S-50-V2I
S-50-V2L
S-56-V1
S-56-V2I
S-56-V2L
S-64-V1
S-64-V2I
S-64-V2L
S-68-V1
S-68-V2I
S-68-V2L
S-82-V2I
$ 87
87
87
$ 94
94
94
$ 98
98
98
$103
103
103
$107
107
107
$109
109
109
$114
114
114
$122
$ 90
90
90
$ 97
97
97
$100
100
100
$105
105
105
$110
110
110
$113
113
113
$117
117
117
$125
To Order, Specify:
• Includes 180° vertical cover, square painted top cap and base
raceway cover.
• Includes top cap with one or two alignment tabs; specify
accordingly.
1) Product number, including:
• For use with multiple height PLACES panels in a 180°, 3-Way
condition with UniGroup Too square painted top cap; specify
height to match lowest panel height except in V2I condition.
• Not for use with legacy expanded panels.
• To be used with straight top cap panels only.
• Product specification must reflect number of top cap
alignment tabs for lowest like panel heights in an ��I’’ or ��L’’
condition; refer to UniGroup Too Application Guidelines.
• Top cap alignment tabs are for dedicated applications and
are not field removable; -V1, -V2I, -V2L.
• Required by UL for covering base raceway power connectors
when power connector covers are not used.
April 2008 / USA
Fabric
Price
Features
Specification Tips
48
Painted
Price
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refertohaworth.com/Canada
1 Surface Finish:
P
Painted
F
Fabric
2) Paint or fabric color for finish post. $13
upcharge (list) for Metallic trim color.
3) Trim color for raceway cover. $13 upcharge
(list) for Metallic trim color.
4) Trim color for top cap. $13 upcharge (list) for
Metallic trim color.
UniGroup Too Price List
This page intentionally blank
April 2008 / USA
49
UniGroup Too Price List
Monolithic Panel with Radius Wood Top Cap
UniGroup
Fabric
FNW-B (Non Powered)
FPW-B (3-Circuit Powered)
FPW-6 (6-Circuit Powered)
Features
Specification Tips
• Includes non-powered or powered panel assembly
radius wood top cap with aligner, with or without
one-piece base raceway cover, 1.6 hinge kits, side
trim rails, leveling glides and carpet gripper; power
distribution assembly/flex connector(s) when power is
specified..6 base raceway end caps are shipped with
each panel.Order additional as necessary.
• Acoustical panel surfaces.
• Panel surfaces may have the same fabric on both
sides or a different fabric on each side.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
• Wood top cap panels require finish posts,
including end-of-run conditions and variable
height conditions.
• For mixed fabric surfaces, price at higher fabric
grade.
• Panels will accept add-on panels up to a
combined height of 82′′(2083mm). For aesthetic
consistency, specify UniGroup add-on panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
To Order, Specify:
1) Product number.
2) Fabric/colorway for panel side one.
3) Fabric/colorway for panel side two.
C
R
US
4) Trim color for raceway cover, glide housings,
end caps and side trim rails.
NOTE:
5) Wood finish color for top cap.
This panel has fabric/colorway
restrictions, see systems fabrics/
color legend.
Non-Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Non-Powered (Example: FNW-462-B) product numbers and list prices shown on opposite page:
Panel Width
Non-Powered without
Base Raceway Cover
(Example: FNW-462-BE)
3-Circuit Powered
(Example: FPW-462-B)
6-Circuit Powered
(Example: FPW-462-6)
or
or
NYC 3-Circuit Powered
(Example: FPW-462-BY)
3-Circuit Powered without
Base Raceway Cover
(Example: FPW-462-BE)
6-Circuit Powered without
Base Raceway Cover
(Example: FPW-462-6E)
or
or
NYC 6-Circuit Powered
(Example: FPW-462-6Y)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: FPW-462-BYE)
NYC 6-Circuit Powered
without Base Raceway Cover
(Example: FPW-462-6YE)
Add:
Deduct:
Add:
Add:
Add:
12′′(305mm)
-$26
$155*
n/a
n/a
n/a
18′′(457mm)
-36
155
n/a
$107
n/a
24′′(610mm)
-44
155
$276
99
$220
30′′(762mm)
-46
155
276
96
217
36′′(914mm)
-50
155
276
87
208
42′′(1067mm)
-57
155
276
81
202
48′′(1219mm)
-60
155
276
75
196
54′′(1372mm)
-63
155
276
69
190
60′′(1524mm)
-69
155
276
63
184
*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Non-powered panels ship without receptacle ports in the base raceway cover.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
• For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on
Power Logic.
• For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.
50
April 2008 / USA
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Monolithic Panel with Radius Wood Top Cap
UniGroup
Actual
Height
Fabric
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Non-Powered
Number
Fabric Grade
A
B
C
D
E
F
G
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
FNW-128- B
FNW-1828- B
FNW-228- B
FNW-3028- B
FNW-328- B
FNW-4228- B
FNW-428- B
FNW-5428- B
FNW-528- B
FNW-135- B
FNW-1835- B
FNW-235- B
FNW-3035- B
FNW-335- B
FNW-4235- B
FNW-435- B
FNW-5435- B
FNW-535- B
FNW-142- B
FNW-1842- B
FNW-242- B
FNW-3042- B
FNW-342- B
FNW-4242- B
FNW-442- B
FNW-5442- B
FNW-542- B
FNW-148- B
FNW-1848- B
FNW-248- B
FNW-3048- B
FNW-348- B
FNW-4248- B
FNW-448- B
FNW-5448- B
FNW-548- B
FNW-162- B
FNW-1862- B
FNW-262- B
FNW-3062- B
FNW-362- B
FNW-4262- B
FNW-462- B
FNW-5462- B
FNW-562- B
FNW-166- B
FNW-1866- B
FNW-266- B
FNW-3066- B
FNW-366- B
FNW-4266- B
FNW-466- B
FNW-5466- B
FNW-566- B
FNW-180- B
FNW-1880- B
FNW-280- B
FNW-3080- B
FNW-380- B
FNW-4280- B
FNW-480- B
FNW-5480- B
FNW-580- B
$ 492
546
595
687
725
801
847
906
965
$ 513
572
629
721
764
839
895
952
1010
$ 538
603
649
721
770
843
898
953
1010
$ 558
633
678
754
803
881
936
1005
1073
$ 595
656
696
792
869
945
998
1083
1167
$ 633
701
748
847
930
1011
1064
1153
1242
$ 721
878
940
1065
1177
1278
1348
1429
1508
$ 584
638
687
779
843
919
965
1024
1083
$ 605
664
721
813
882
957
1013
1070
1128
$ 630
695
741
813
888
961
1016
1071
1128
$ 650
725
770
846
921
999
1054
1123
1191
$ 695
756
796
892
995
1071
1124
1209
1293
$ 733
801
848
947
1056
1137
1190
1279
1368
$ 821
978
1040
1165
1303
1404
1474
1555
1634
$ 628
682
731
823
895
971
1017
1076
1135
$ 649
708
765
857
934
1009
1065
1122
1180
$ 674
739
785
857
940
1013
1068
1123
1180
$ 694
769
814
890
973
1051
1106
1175
1243
$ 745
806
846
942
1069
1145
1198
1283
1367
$ 783
851
898
997
1130
1211
1264
1353
1442
$ 871
1028
1090
1215
1377
1478
1548
1629
1708
$ 640
694
743
835
905
981
1027
1086
1145
$ 661
720
777
869
944
1019
1075
1132
1190
$ 686
751
797
869
950
1023
1078
1133
1190
$ 706
781
826
902
993
1071
1126
1195
1263
$ 757
818
858
954
1115
1191
1244
1329
1413
$ 795
863
910
1009
1188
1269
1322
1411
1500
$ 883
1040
1098
1223
1489
1590
1660
1741
1820
$ 652
706
755
847
917
993
1039
1098
1157
$ 673
732
789
881
956
1031
1087
1144
1202
$ 698
763
809
881
988
1061
1116
1171
1228
$ 718
793
838
914
1053
1131
1186
1255
1323
$ 767
828
868
964
1187
1263
1316
1401
1485
$ 805
873
920
1019
1268
1349
1402
1491
1580
$ 893
1050
1146
1271
1585
1686
1756
1837
1916
$ 662
716
765
857
929
1005
1051
1110
1169
$ 683
742
799
891
968
1043
1099
1156
1214
$ 708
773
819
891
1040
1113
1168
1223
1280
$ 728
803
848
924
1113
1191
1246
1315
1383
$ 777
838
896
992
1265
1341
1394
1479
1563
$ 815
883
958
1057
1352
1433
1486
1575
1664
$ 903
1060
1194
1319
1687
1788
1858
1939
2018
$ 528
582
631
723
773
849
895
954
1013
$ 549
608
665
757
812
887
943
1000
1058
$ 574
639
685
757
818
891
946
1001
1058
$ 594
669
714
790
851
929
984
1053
1121
$ 635
696
736
832
921
997
1050
1135
1219
$ 673
741
788
887
982
1063
1116
1205
1294
$ 761
918
980
1105
1229
1330
1400
1481
1560
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
51
UniGroup Too Price List
Glazed Monolithic Panel with Radius Wood Top Cap
UniGroup
Glazed
Features
Specification Tips
• Includes non-powered or powered panel assembly,
radius wood top cap with aligner, with or without
one-piece base raceway cover, 1.6 hinge kits, side
trim rails, leveling glides and carpet gripper; power
distribution assembly/flex connector(s) when power is
specified. .6 base raceway end caps are shipped with
each panel.Order additional as necessary.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Does not accept top feed modules.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
• Wood top cap panels require finish posts,
including end-of-run conditions and variable
height conditions.
• Panels will accept glazed add-on panels up to a
combined height of 82″(2083mm). For aesthetic
consistency, specify UniGroup add-on panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
To Order, Specify:
1) Product number.
2) Glazing finish color.
GNW-B (Non Powered)
C
R
GPW-B (3-Circuit Powered)
GPW-6 (6-Circuit Powered)
3) Trim color for frame, raceway cover, glide
housing, end caps and side trim rails.
4) Wood finish color for top cap.
US
Non-Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Non-Powered (Example: GNW-462-B) product numbers and list prices shown on opposite page:
Panel Width
Non-Powered without
Base Raceway Cover
(Example: GNW-462-BE)
3-Circuit Powered
(Example: GPW-462-B)
6-Circuit Powered
(Example: GPW-462-6)
or
or
NYC 3-Circuit Powered
(Example: GPW-462-BY)
3-Circuit Powered without
Base Raceway Cover
(Example: GPW-462-BE)
6-Circuit Powered without
Base Raceway Cover
(Example: GPW-462-6E)
or
or
NYC 6-Circuit Powered
(Example: GPW-462-6Y)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: GPW-462-BYE)
NYC 6-Circuit Powered
without Base Raceway Cover
(Example: GPW-462-6YE)
Add:
Deduct:
Add:
Add:
Add:
12′′(305mm)
-$26
$155*
n/a
n/a
n/a
24′′(610mm)
-44
155
$276
$99
$220
36′′(914mm)
-50
155
276
87
208
42′′(1067mm)
-57
155
276
81
202
48′′(1219mm)
-60
155
276
75
196
60′′(1524mm)
-69
155
276
63
184
*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Non-powered panels ship without receptacle ports in the base raceway cover.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
• For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on
Power Logic.
• For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.
52
April 2008 / USA
Class AA – GSA: Open Market
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Glazed Monolithic Panel with Radius Wood Top Cap
UniGroup
Actual
Height
Glazed
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Non-Powered
Number
Clear or
Bronze Price
Frosted Price
12′′(305mm)
24′′(610mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
12′′(305mm)
24′′(610mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
12′′(305mm)
24′′(610mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
GNW-162- B
GNW-262- B
GNW-362- B
GNW-4262- B
GNW-462- B
GNW-562- B
GNW-166- B
GNW-266- B
GNW-366- B
GNW-4266- B
GNW-466- B
GNW-566- B
GNW-180- B
GNW-280- B
GNW-380- B
GNW-4280- B
GNW-480- B
GNW-580- B
$ 905
1147
1402
1571
1691
1959
$ 963
1219
1485
1676
1803
2088
$1097
1464
1772
1993
2142
2455
$1091
1333
1689
1858
1978
2246
$1149
1405
1772
1963
2090
2375
$1283
1650
2059
2280
2429
2742
Product marked with this symbol available as GSA open market.
Class AA – GSA: Open Market
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
53
UniGroup Too Price List
Monolithic Panel with Radius Steel Top Cap
UniGroup
Fabric
EFN-B (Non Powered)
EFP-B (3-Circuit Powered)
EFP-6 (6-Circuit Powered)
Features
Specification Tips
• Includes non-powered or powered panel assembly,
radius steel top cap, with or without one-piece base
raceway cover, 1.6 hinge kits, side trim rails, leveling
glides and carpet gripper; power distribution
assembly/flex connector(s) when power is specified.
.6 base raceway end caps are shipped with each
panel. Order additional as necessary.
• Acoustical panel surfaces.
• Panel surfaces may have the same fabric on both
sides or a different fabric on each side.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
• For mixed fabric surfaces, price at higher fabric
grade.
• Panels will accept add-on panels up to a
combined height of 82″(2083mm). For aesthetic
consistency, specify UniGroup add-on panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
• Additional base raceway cover end caps will
need to be specified if finish posts are not
ordered.
To Order, Specify:
1) Product number.
2) Fabric/colorway for panel side one.
3) Fabric/colorway for panel side two.
C
R
US
4) Trim color for raceway cover, glide housings
and end caps.
NOTE:
5) Trim color for top cap and side trim rails.
This panel has fabric/colorway
restrictions, see Systems Fabric/
Color Legend.
Non-Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Non-Powered (Example: EFN-462-B) product numbers and list prices shown on opposite page:
Panel Width
Non-Powered without
Base Raceway Cover
(Example: EFN-462-BE)
3-Circuit Powered
(Example: EFP-462-B)
6-Circuit Powered
(Example: EFP-462-6)
or
or
NYC 3-Circuit Powered
(Example: EFP-462-BY)
3-Circuit Powered without
Base Raceway Cover
(Example: EFP-462-BE)
6-Circuit Powered without
Base Raceway Cover
(Example: EFP-462-6E)
or
or
NYC 6-Circuit Powered
(Example: EFP-462-6Y)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: EFP-462-BYE)
NYC 6-Circuit Powered
without Base Raceway Cover
(Example: EFP-462-6YE)
Add:
Add:
Deduct:
Add:
Add:
12′′(305mm)
-$26
$155*
n/a
n/a
n/a
18′′(457mm)
-36
155
n/a
$107
n/a
24′′(610mm)
-44
155
$276
99
$220
30′′(762mm)
-46
155
276
96
217
36′′(914mm)
-50
155
276
87
208
42′′(1067mm)
-57
155
276
81
202
48′′(1219mm)
-60
155
276
75
196
54′′(1372mm)
-63
155
276
69
190
60′′(1524mm)
-69
155
276
63
184
*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Non-powered panels ship without receptacle ports in the base raceway cover.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
• For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on
Power Logic.
• For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.
54
April 2008 / USA
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Monolithic Panel with Radius Steel Top Cap
UniGroup
Actual
Height
Fabric
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Non-Powered
Number
Fabric Grade
A
B
C
D
E
F
G
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
EFN-128- B
EFN-1828- B
EFN-228- B
EFN-3028- B
EFN-328- B
EFN-4228- B
EFN-428- B
EFN-5428- B
EFN-528- B
EFN-135- B
EFN-1835- B
EFN-235- B
EFN-3035- B
EFN-335- B
EFN-4235- B
EFN-435- B
EFN-5435- B
EFN-535- B
EFN-142- B
EFN-1842- B
EFN-242- B
EFN-3042- B
EFN-342- B
EFN-4242- B
EFN-442- B
EFN-5442- B
EFN-542- B
EFN-148- B
EFN-1848- B
EFN-248- B
EFN-3048- B
EFN-348- B
EFN-4248- B
EFN-448- B
EFN-5448- B
EFN-548- B
EFN-154- B
EFN-1854- B
EFN-254- B
EFN-3054- B
EFN-354- B
EFN-4254- B
EFN-454- B
EFN-5454- B
EFN-554- B
EFN-162- B
EFN-1862- B
EFN-262- B
EFN-3062- B
EFN-362- B
EFN-4262- B
EFN-462- B
EFN-5462- B
EFN-562- B
EFN-166- B
EFN-1866- B
EFN-266- B
EFN-3066- B
EFN-366- B
EFN-4266- B
EFN-466- B
EFN-5466- B
EFN-566- B
EFN-180- B
EFN-1880- B
EFN-280- B
EFN-3080- B
EFN-380- B
EFN-4280- B
EFN-480- B
EFN-5480- B
EFN-580- B
$ 476
523
566
652
681
751
790
843
900
$ 500
550
596
686
719
785
831
885
942
$ 522
583
620
686
725
790
834
887
942
$ 539
610
646
717
756
827
873
939
1004
$ 564
635
667
757
812
881
929
1000
1068
$ 580
647
684
778
825
889
933
1015
1096
$ 615
680
717
812
884
957
999
1085
1173
$ 704
854
907
1028
1131
1225
1285
1362
1437
$ 568
615
658
744
799
869
908
961
1018
$ 592
642
688
778
837
903
949
1003
1060
$ 614
675
712
778
843
908
952
1005
1060
$ 631
702
738
809
874
945
991
1057
1122
$ 656
727
759
849
930
999
1047
1118
1186
$ 680
747
784
878
951
1015
1059
1141
1222
$ 715
780
817
912
1010
1083
1125
1211
1299
$ 804
954
1007
1128
1257
1351
1411
1488
1563
$ 612
659
702
788
851
921
960
1013
1070
$ 636
686
732
822
889
955
1001
1055
1112
$ 658
719
756
822
895
960
1004
1057
1112
$ 675
746
782
853
926
997
1043
1109
1174
$ 700
771
803
893
982
1051
1099
1170
1238
$ 730
797
834
928
1025
1089
1133
1215
1296
$ 765
830
867
962
1084
1157
1199
1285
1373
$ 854
1004
1057
1178
1331
1425
1485
1562
1637
$ 624
671
714
800
861
931
970
1023
1080
$ 648
698
744
834
899
965
1011
1065
1122
$ 670
731
768
834
917
982
1026
1079
1134
$ 687
758
794
865
946
1017
1065
1129
1194
$ 714
785
817
907
1026
1095
1143
1214
1282
$ 742
809
846
940
1071
1135
1179
1261
1342
$ 777
842
879
974
1142
1215
1257
1343
1431
$ 866
1016
1065
1186
1443
1537
1597
1674
1749
$ 636
683
726
812
873
943
982
1035
1092
$ 660
710
756
846
911
977
1023
1077
1134
$ 682
743
780
846
943
1008
1052
1105
1160
$ 699
770
806
877
1006
1077
1091
1189
1254
$ 726
797
829
919
1092
1161
1209
1280
1348
$ 752
819
866
960
1143
1207
1251
1333
1414
$ 787
852
899
994
1222
1295
1337
1423
1511
$ 876
1026
1113
1234
1539
1633
1693
1770
1845
$ 646
693
736
822
885
955
994
1047
1104
$ 670
720
766
856
923
989
1035
1089
1146
$ 692
753
790
856
995
1060
1104
1157
1212
$ 709
780
816
887
1066
1137
1143
1249
1314
$ 738
809
841
931
1160
1229
1277
1348
1416
$ 762
829
884
978
1221
1285
1329
1411
1492
$ 797
862
927
1022
1306
1379
1421
1507
1595
$ 886
1036
1161
1282
1641
1735
1795
1872
1947
$ 512
559
602
688
729
799
838
891
948
$ 536
586
632
722
767
833
879
933
990
$ 558
619
656
722
773
838
882
935
990
$ 575
646
682
753
804
875
921
987
1052
$ 600
671
703
793
860
929
977
1048
1116
$ 620
687
724
818
877
941
985
1067
1148
$ 655
720
757
852
936
1009
1051
1137
1225
$ 744
894
947
1068
1183
1277
1337
1414
1489
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
55
UniGroup Too Price List
Basic Monolithic Panel with Radius Steel Top Cap
UniGroup
Fabric
EMN-B (Non Powered)
EMP-B (3-Circuit Powered)
EMP-6 (6-Circuit Powered)
Features
Specification Tips
• Includes non-powered or powered panel assembly,
radius steel top cap, with or without one-piece base
raceway cover, 1.6 hinge kits, side trim rails, leveling
glides and carpet gripper; power distribution
assembly/flex connector(s) when power is specified.
.6 base raceway end caps are shipped with each
panel. Order additional as necessary.
• Acoustical panel surfaces.
• Panel surfaces may have the same fabric on both
sides or a different fabric on each side.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
• For mixed fabric surfaces, price at higher fabric
grade.
• Panels will accept add-on panels up to a
combined height of 82″(2083mm). For aesthetic
consistency, specify UniGroup add-on panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
• Additional base raceway cover end caps will
need to be specified if finish posts are not
ordered.
To Order, Specify:
1) Product number.
2) Fabric/colorway for panel side one.
3) Fabric/colorway for panel side two.
C
R
US
4) Trim color for raceway cover, glide housings
and end caps.
NOTE:
5) Trim color for top cap and side trim rails.
This panel has fabric/colorway
restrictions, see Systems Fabric/
Color Legend.
Non-Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Non-Powered (Example: EMN-462-B) product numbers and list prices shown on opposite page:
Panel Width
Non-Powered without
Base Raceway Cover
(Example: EMN-462-BE)
3-Circuit Powered
(Example: EMP-462-B)
6-Circuit Powered
(Example: EMP-462-6)
or
or
NYC 3-Circuit Powered
(Example: EMP-462-BY)
3-Circuit Powered without
Base Raceway Cover
(Example: EMP-462-BE)
6-Circuit Powered without
Base Raceway Cover
(Example: EMP-462-6E)
or
or
NYC 6-Circuit Powered
(Example: EMP-462-6Y)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: EMP-462-BYE)
NYC 6-Circuit Powered
without Base Raceway Cover
(Example: EMP-462-6YE)
Add:
Add:
Deduct:
Add:
Add:
12′′(305mm)
-$26
$155*
n/a
n/a
n/a
18′′(457mm)
-36
155
n/a
$107
n/a
24′′(610mm)
-44
155
$276
99
$220
30′′(762mm)
-46
155
276
96
217
36′′(914mm)
-50
155
276
87
208
42′′(1067mm)
-57
155
276
81
202
48′′(1219mm)
-60
155
276
75
196
54′′(1372mm)
-63
155
276
69
190
60′′(1524mm)
-69
155
276
63
184
*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Non-powered panels ship without receptacle ports in the base raceway cover.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
• For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on
Power Logic.
• For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.
56
April 2008 / USA
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Basic Monolithic Panel with Radius Steel Top Cap
UniGroup
Actual
Height
Fabric
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Non-Powered
Number
Fabric Grade
A
B
C
D
E
F
G
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
EMN-128- B
EMN-1828- B
EMN-228- B
EMN-3028- B
EMN-328- B
EMN-4228- B
EMN-428- B
EMN-5428- B
EMN-528- B
EMN-135- B
EMN-1835- B
EMN-235- B
EMN-3035- B
EMN-335- B
EMN-4235- B
EMN-435- B
EMN-5435- B
EMN-535- B
EMN-142- B
EMN-1842- B
EMN-242- B
EMN-3042- B
EMN-342- B
EMN-4242- B
EMN-442- B
EMN-5442- B
EMN-542- B
EMN-148- B
EMN-1848- B
EMN-248- B
EMN-3048- B
EMN-348- B
EMN-4248- B
EMN-448- B
EMN-5448- B
EMN-548- B
EMN-154- B
EMN-1854- B
EMN-254- B
EMN-3054- B
EMN-354- B
EMN-4254- B
EMN-454- B
EMN-5454- B
EMN-554- B
EMN-162- B
EMN-1862- B
EMN-262- B
EMN-3062- B
EMN-362- B
EMN-4262- B
EMN-462- B
EMN-5462- B
EMN-562- B
EMN-166- B
EMN-1866- B
EMN-266- B
EMN-3066- B
EMN-366- B
EMN-4266- B
EMN-466- B
EMN-5466- B
EMN-566- B
EMN-180- B
EMN-1880- B
EMN-280- B
EMN-3080- B
EMN-380- B
EMN-4280- B
EMN-480- B
EMN-5480- B
EMN-580- B
$ 408
453
487
565
588
647
681
731
778
$ 431
476
557
594
622
678
719
767
815
$ 455
505
538
594
627
685
721
768
815
$ 467
528
560
621
655
715
755
813
872
$ 490
561
592
675
702
763
806
864
924
$ 502
551
581
654
714
771
809
879
948
$ 533
589
623
701
765
830
865
941
1015
$ 610
741
789
895
979
1061
1115
1182
1250
$ 500
545
579
657
706
765
799
849
896
$ 523
568
649
686
740
796
837
885
933
$ 547
597
630
686
745
803
839
886
933
$ 563
624
656
717
777
837
877
935
994
$ 582
653
684
767
820
881
924
982
1042
$ 602
651
681
754
840
897
935
1005
1074
$ 633
689
723
801
891
956
991
1067
1141
$ 710
841
889
995
1105
1187
1241
1308
1376
$ 544
589
623
701
758
817
851
901
948
$ 567
612
693
730
792
848
889
937
985
$ 591
641
674
730
797
855
891
938
985
$ 611
672
704
765
825
885
925
983
1042
$ 626
697
728
811
872
933
976
1034
1094
$ 652
701
731
804
914
971
1009
1079
1148
$ 683
739
773
851
965
1030
1065
1141
1215
$ 760
891
939
1045
1179
1261
1315
1382
1450
$ 556
601
635
713
768
827
861
911
958
$ 579
624
705
742
802
858
899
947
995
$ 603
653
686
742
819
877
913
960
1007
$ 615
676
708
769
845
905
945
1003
1062
$ 640
711
742
825
914
975
1018
1076
1136
$ 664
713
743
816
958
1015
1053
1123
1192
$ 695
751
785
863
1023
1088
1123
1199
1273
$ 772
903
945
1051
1291
1061
1427
1494
1562
$ 568
613
647
725
780
839
873
923
970
$ 591
636
717
754
814
870
911
959
1007
$ 615
665
698
754
845
903
939
986
1033
$ 627
688
720
781
903
963
1003
1061
1120
$ 652
723
754
837
982
1043
1086
1144
1204
$ 674
723
763
836
1032
1089
1127
1197
1266
$ 705
761
805
883
1103
1168
1203
1279
1353
$ 782
913
993
1099
1387
1061
1523
1590
1658
$ 578
623
657
735
792
851
885
935
982
$ 601
646
727
764
826
882
923
971
1019
$ 625
675
708
764
897
955
991
1038
1085
$ 637
698
730
791
965
1025
1065
1123
1182
$ 664
735
766
849
1048
1109
1152
1210
1270
$ 684
733
781
854
1110
1167
1205
1275
1344
$ 715
771
833
911
1187
1252
1287
1363
1437
$ 792
923
1043
1149
1487
1061
1623
1690
1758
$ 444
489
523
601
636
695
729
779
826
$ 467
512
593
630
670
726
767
815
863
$ 491
541
574
630
675
733
769
816
863
$ 503
564
596
657
703
763
803
861
920
$ 526
597
628
711
750
811
854
912
972
$ 542
591
621
694
766
823
861
931
1000
$ 573
629
663
741
817
882
917
993
1067
$ 650
781
829
935
1031
1113
1167
1234
1302
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
57
UniGroup Too Price List
Laminate Monolithic Panel with Radius Steel Top Cap
UniGroup
Laminate
EDN-B (Non Powered)
C
R
Features
Specification Tips
• Includes non-powered or powered panel assembly,
radius steel top cap, with or without one-piece base
raceway cover, 1.6 hinge kits, side trim rails, leveling
glides and carpet gripper; power distribution
assembly/flex connector(s) when power is specified.
.6 base raceway end caps are shipped with each
panel. Order additional as necessary.
• Panel surfaces may have same laminate on both
sides or a different laminate on each side.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
• Panels will accept add-on panels up to a
combined height of 82′′(2083mm). For aesthetic
consistency, specify UniGroup add-on panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
• Additional base raceway cover end caps will
need to be specified if finish posts are not
ordered.
EDP-B (3-Circuit Powered)
EDP-6 (6-Circuit Powered)
To Order, Specify:
1) Product number.
2) Laminate surface color for panel side one.
3) Laminate surface color for panel side two.
4) Trim color for raceway cover, glide housings
and end caps.
US
5) Trim color for top cap and side trim rails.
Non-Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Non-Powered (Example: EDN-462-B) product numbers and list prices shown on opposite page:
Panel Width
Non-Powered without
Base Raceway Cover
(Example: EDN-462-BE)
3-Circuit Powered
(Example: EDP-462-B)
6-Circuit Powered
(Example: EDP-462-6)
or
or
NYC 3-Circuit Powered
(Example: EDP-462-BY)
3-Circuit Powered without
Base Raceway Cover
(Example: EDP-462-BE)
6-Circuit Powered without
Base Raceway Cover
(Example: EDP-462-6E)
or
or
NYC 6-Circuit Powered
(Example: EDP-462-6Y)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: EDP-462-BYE)
NYC 6-Circuit Powered
without Base Raceway Cover
(Example: EDP-462-6YE)
Add:
Add:
Deduct:
Add:
Add:
12′′(305mm)
-$26
$155*
n/a
n/a
n/a
18′′(457mm)
-36
155
n/a
$107
n/a
24′′(610mm)
-44
155
$276
99
$220
30′′(762mm)
-46
155
276
96
217
36′′(914mm)
-50
155
276
87
208
42′′(1067mm)
-57
155
276
81
202
48′′(1219mm)
-60
155
276
75
196
60′′(1524mm)
-69
155
276
63
184
*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Non-powered panels ship without receptacle ports in the base raceway cover.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
• For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on
Power Logic.
• For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.
58
April 2008 / USA
Class AA – GSA: Open Market
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Laminate Monolithic Panel with Radius Steel Top Cap
UniGroup
Actual
Height
Laminate
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Non-Powered
Number
Price
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
EDN-135- B
EDN-1835- B
EDN-235- B
EDN-3035- B
EDN-335- B
EDN-4235- B
EDN-435- B
EDN-535- B
EDN-142- B
EDN-1842- B
EDN-242- B
EDN-3042- B
EDN-342- B
EDN-4242- B
EDN-442- B
EDN-542- B
EDN-148- B
EDN-1848- B
EDN-248- B
EDN-3048- B
EDN-348- B
EDN-4248- B
EDN-448- B
EDN-548- B
EDN-154- B
EDN-1854- B
EDN-254- B
EDN-3054- B
EDN-354- B
EDN-4254- B
EDN-454- B
EDN-554- B
EDN-162- B
EDN-1862- B
EDN-262- B
EDN-3062- B
EDN-362- B
EDN-4262- B
EDN-462- B
EDN-562- B
EDN-166- B
EDN-1866- B
EDN-266- B
EDN-3066- B
EDN-366- B
EDN-4266- B
EDN-466- B
EDN-566- B
EDN-180- B
EDN-1880- B
EDN-280- B
EDN-3080- B
EDN-380- B
EDN-4280- B
EDN-480- B
EDN-580- B
$ 718
794
930
992
1038
1132
1200
1361
$ 790
874
931
1028
1085
1184
1247
1410
$ 795
898
952
1055
1113
1216
1284
1481
$ 834
954
1006
1147
1194
1297
1370
1571
$ 878
965
1017
1144
1250
1349
1414
1612
$ 923
1019
1078
1213
1324
1434
1497
1757
$1036
1245
1316
1493
1635
1771
1861
2086
Product marked with this symbol available as GSA open market.
Class AA – GSA: Open Market
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
59
UniGroup Too Price List
Open Frame Panel with Radius Steel Top Cap
UniGroup
Open-Frame
EON-B (Non Powered)
C
R
Features
Specification Tips
• Includes non-powered or powered panel assembly,
radius steel top cap, with or without one-piece base
raceway cover, 1.6 hinge kits, side trim rails, leveling
glides and carpet gripper; power distribution
assembly/flex connector(s) when power is specified.
.6 base raceway end caps are shipped with each
panel. Order additional as necessary.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Does not accept top feed modules.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
• Panels will accept glazed add-on panels up to a
combined height of 82′′(2083mm). For aesthetic
consistency, specify UniGroup add-on panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
• Additional base raceway cover end caps will
need to be specified if finish posts are not
ordered.
To Order, Specify:
1) Product number.
2) Trim color for raceway cover, glide housings
and end caps.
EOP-B (3-Circuit Powered)
EOP-6 (6-Circuit Powered)
3) Trim color for frame, top cap and side trim
rails.
US
Non-Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Non-Powered (Example: EON-462-B) product numbers and list prices shown on opposite page:
Panel Width
Non-Powered without
Base Raceway Cover
(Example: EON-462-BE)
3-Circuit Powered
(Example: EOP-462-B)
6-Circuit Powered
(Example: EOP-462-6)
or
or
NYC 3-Circuit Powered
(Example: EOP-462-BY)
3-Circuit Powered without
Base Raceway Cover
(Example: EOP-462-BE)
6-Circuit Powered without
Base Raceway Cover
(Example: EOP-462-6E)
or
or
NYC 6-Circuit Powered
(Example: EOP-462-6Y)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: EOP-462-BYE)
NYC 6-Circuit Powered
without Base Raceway Cover
(Example: EOP-462-6YE)
Add:
Add:
Deduct:
Add:
Add:
12′′(305mm)
-$26
$155*
n/a
n/a
n/a
18′′(457mm)
-36
155
n/a
$107
n/a
24′′(610mm)
-44
155
$276
99
$220
36′′(914mm)
-50
155
276
87
208
42′′(1067mm)
-57
155
276
81
202
48′′(1219mm)
-60
155
276
75
196
60′′(1524mm)
-69
155
276
63
184
*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Non-powered panels ship without receptacle ports in the base raceway cover.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
• For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on
Power Logic.
• For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.
60
April 2008 / USA
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Open Frame Panel with Radius Steel Top Cap
UniGroup
Actual
Height
Open Frame
37′′(940mm)
44′′(1118mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Non-Powered
Number
Price
12′′(305mm)
18′′(457mm)
24′′(610mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
12′′(305mm)
24′′(610mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
12′′(305mm)
24′′(610mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
12′′(305mm)
24′′(610mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
EON-135- B
EON-1835- B
EON-235- B
EON-335- B
EON-4235- B
EON-435- B
EON-535- B
EON-142- B
EON-1842- B
EON-242- B
EON-342- B
EON-4242- B
EON-442- B
EON-542- B
EON-162- B
EON-262- B
EON-362- B
EON-4262- B
EON-462- B
EON-562- B
EON-166- B
EON-266- B
EON-366- B
EON-4266- B
EON-466- B
EON-566- B
EON-180- B
EON-280- B
EON-380- B
EON-4280- B
EON-480- B
EON-580- B
$ 307
348
386
444
481
518
563
$ 364
404
447
523
564
620
673
$ 543
649
790
837
958
1109
$ 578
688
843
890
1016
1186
$ 658
795
1046
1048
1160
1346
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
61
UniGroup Too Price List
Glazed Monolithic Panel with Radius Steel Top Cap
UniGroup
Glazed
Features
Specification Tips
• Includes non-powered or powered panel assembly,
radius steel top cap, with or without one-piece base
raceway cover, 1.6 hinge kits, side trim rails, leveling
glides and carpet gripper; power distribution
assembly/flex connector(s) when power is specified.
.6 base raceway end caps are shipped with each
panel. Order additional as necessary.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Does not accept top feed modules.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
• Panels will accept glazed add-on panels up to a
combined height of 82″(2083mm). For aesthetic
consistency, specify UniGroup add-on panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
• Additional base raceway cover end caps will
need to be specified if finish post are not
ordered.
To Order, Specify:
1) Product number.
2) Glazing finish color.
EGN-B (Non Powered)
C
R
EGP-B (3-Circuit Powered)
EGP-6 (6-Circuit Powered)
3) Trim color for raceway cover, glide housings
and end caps.
4) Trim color for frame, top cap and side trim
rails.
US
Non-Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Non-Powered (Example: EGN-462-B) product numbers and list prices shown on opposite page:
Panel Width
Non-Powered without
Base Raceway Cover
(Example: EGN-462-BE)
3-Circuit Powered
(Example: EGP-462-B)
6-Circuit Powered
(Example: EGP-462-6)
or
or
NYC 3-Circuit Powered
(Example: EGP-462-BY)
3-Circuit Powered without
Base Raceway Cover
(Example: EGP-462-BE)
6-Circuit Powered without
Base Raceway Cover
(Example: EGP-462-6E)
or
or
NYC 6-Circuit Powered
(Example: EGP-462-6Y)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: EGP-462-BYE)
NYC 6-Circuit Powered
without Base Raceway Cover
(Example: EGP-462-6YE)
Add:
Add:
Deduct:
Add:
Add:
12′′(305mm)
-$26
$155*
n/a
n/a
n/a
18′′(457mm)
-36
155
$276
$107
n/a
24′′(610mm)
-44
155
276
99
$220
30′′(762mm)
-46
155
276
96
217
36′′(914mm)
-50
155
276
87
208
42′′(1067mm)
-57
155
276
81
202
48′′(1219mm)
-60
155
276
75
196
60′′(1524mm)
-69
155
276
63
184
*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Non-powered panels ship without receptacle ports in the base raceway cover.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
• For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on
Power Logic.
• For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.
62
April 2008 / USA
Class AA – GSA: Open Market
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Glazed Monolithic Panel with Radius Steel Top Cap
UniGroup
Actual
Height
Glazed
44′′(1118mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Non-Powered
Number
Clear or
Bronze Price
Frosted Price
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
EGN-142- B
EGN-1842- B
EGN-242- B
EGN-3042- B
EGN-342- B
EGN-4242- B
EGN-442- B
EGN-542- B
EGN-154- B
EGN-1854- B
EGN-254- B
EGN-3054- B
EGN-354- B
EGN-4254- B
EGN-454- B
EGN-554- B
EGN-162- B
EGN-1862- B
EGN-262- B
EGN-3062- B
EGN-362- B
EGN-4262- B
EGN-462- B
EGN-562- B
EGN-166- B
EGN-1866- B
EGN-266- B
EGN-3066- B
EGN-366- B
EGN-4266- B
EGN-466- B
EGN-566- B
EGN-180- B
EGN-1880- B
EGN-280- B
EGN-3080- B
EGN-380- B
EGN-4280- B
EGN-480- B
EGN-580- B
$ 816
919
1020
1145
1268
1343
1512
1634
$ 790
941
1002
1172
1217
1373
1484
1745
$ 837
950
1064
1184
1306
1467
1578
1838
$ 889
1013
1134
1260
1389
1568
1684
1965
$1023
1198
1374
1524
1666
1880
2018
2328
$ 961
1064
1165
1290
1497
1572
1741
1863
$ 935
1086
1147
1317
1446
1602
1713
1974
$1023
1136
1250
1370
1593
1754
1865
2125
$1075
1199
1320
1446
1676
1855
1971
2252
$1209
1384
1560
1710
1953
2167
2305
2615
Product marked with this symbol available as GSA open market.
BLANK
BLANK
Class AA – GSA: Open Market
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
63
UniGroup Too Price List
Monolithic Fabric Add-On Panel
UniGroup
Fabric
Features
To Order, Specify:
1) Product number.
EAF
• Includes panel, vertical connector (bayonet), light
block, side trim rails, two full hinge sets, side trim rail
covers and top cap clips.
• Fabric add-on panels may be installed above any
straight fabric and laminate base or fabric add-on
panels.*
• Both sides in same fabric; one color or different color
each side.
• Each base panel will accept two add-on panels.
• Lower Level add-on panel will accept overhead
components (load bearing). Second add-on panel
(top) is non-load bearing.
• Utilizes top cap from base panel.
• Standard finish posts can be used.
• Same construction as UniGroup Monolithic fabric
panel.
Specification Tips
NOTES:
This panel has fabric/
colorway restrictions, see
Fabrics/Color Legend.
*Add-on panel cannot be
used with add-on panels
ordered with the SP** prefix.
64
April 2008 / USA
• For mixed fabric surfaces, specify fabric/color for
each fabric surface and price at higher grade.
• Add-on panels may be stacked a maximum of two
high in any order of height above a base panel.
• Add-on panel must match panel width.
• Combination of panel and add-on panel cannot
exceed 82′′(2083mm) in height.
• Cannot be used above any door, glazed, legacy
videne, open-frame or glazed add-on panels.
• Base and add-on panel combinations should match
existing base panel heights so that end-of-runs and
finish posts can be used without field modification.
• Full-height side trim rails required for end-of-run
conditions with a base panel and one add-on panel,
separately specified.
• For two high add-on panel applications specify
separately full-height side trim rail for base panel and
one high add on, for two high panel add on location
use side trim rail that ships with add-on panel.
• Clerestory can be added above fabric add-on panels.
See Specification Guide for application guidelines.
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Fabric/colorway for add-on panel side one.
3) Fabric/colorway for add-on panel side two.
4) Trim color for side trim rails, and trim strip.
UniGroup Too Price List
Monolithic Fabric Add-On Panel
UniGroup
Actual
Height
Fabric
12′′(305mm)
14′′(356mm)
18′′(437mm)
20′′(437mm)
24′′(610mm)
Width
Number
Fabric Grade
A
B
C
D
E
F
G
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
EAF-112
EAF-1812
EAF-212
EAF-3012
EAF-312
EAF-4212
EAF-412
EAF-5412
EAF-512
EAF-114
EAF-1814
EAF-214
EAF-3014
EAF-314
EAF-4214
EAF-414
EAF-5414
EAF-514
EAF-118
EAF-1818
EAF-218
EAF-3018
EAF-318
EAF-4218
EAF-418
EAF-5418
EAF-518
EAF-120
EAF-1820
EAF-220
EAF-3020
EAF-320
EAF-4220
EAF-420
EAF-5420
EAF-520
EAF-124
EAF-1824
EAF-224
EAF-3024
EAF-324
EAF-4224
EAF-424
EAF-5424
EAF-524
$433
479
506
531
555
581
605
620
631
$442
491
522
547
569
593
617
630
641
$488
555
581
605
631
655
681
693
713
$504
560
588
616
644
674
695
712
728
$594
620
643
667
692
718
743
755
768
$513
559
586
611
635
661
685
700
711
$522
571
602
627
649
673
697
710
721
$568
635
661
685
711
735
761
773
793
$584
640
668
696
724
754
775
792
808
$674
700
723
747
772
798
823
835
848
$523
569
596
621
645
671
695
710
721
$532
581
612
637
659
683
707
720
731
$578
645
671
695
721
745
771
783
803
$594
650
678
706
734
764
785
802
818
$684
710
733
757
782
808
833
845
858
$533
579
606
631
655
681
705
720
731
$542
591
622
647
669
693
717
730
741
$588
655
681
705
731
755
781
793
813
$604
660
688
716
744
774
795
812
828
$694
720
743
767
800
826
851
863
876
$547
593
620
645
669
695
719
734
745
$556
605
636
661
683
707
731
744
755
$602
669
695
719
745
769
795
807
827
$618
674
702
730
766
796
817
834
850
$708
734
757
781
830
856
881
893
906
$557
603
630
655
679
705
729
744
755
$566
615
646
671
693
717
741
754
765
$612
679
705
729
767
791
817
829
849
$628
684
712
740
794
824
845
862
878
$718
744
767
791
866
892
917
929
942
$473
519
546
571
595
621
645
660
671
$482
531
562
587
609
633
657
670
681
$528
595
621
645
671
695
721
733
753
$544
600
628
656
684
714
735
752
768
$634
660
683
707
732
758
783
795
808
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
65
UniGroup Too Price List
Monolithic Glazed Add-On Panel
UniGroup
Glazed
EAG
NOTE:
*Add-on panel cannot be
used with add-on panels
ordered with the SP** prefix.
Features
To Order, Specify:
• Includes panel, vertical connector (bayonet), light
block, side trim rails, two full hinge sets, side trim rail
cover, and top cap clips.
• Utilizes top cap from base panel.
• Glazed add-on panels may be installed above any
straight fabric, glazed, laminate, or open-frame base
or add-on panels.*
• Each base panel will accept two add-on panels.
• Glazed add-on panels will not accept any load
bearing components.
• Top rail of add-on panel will provide top wire
management.
• Glazing material for English Reeded, Checks Mix,
and Vertical Moire is textured on one side only.
Recommend installing the textured side to face the
interior of the workstation.
• Standard finish post and end-of-run posts can be
used.
1) Product number, including:
Specification Tips
• Specify glazed add-on panel based upon the type of
panel, fabric (F) or glazed/open-frame (G), that will be
directly below the add-on panel.
• Add-on panels may be stacked a maximum of two
high in any order of height above a base panel.
• Add-on panel must match base panel width.
• Combination of base panel and add-on panel cannot
exceed 82′′(2083mm) in height.
• Base and add-on panel combinations should match
existing base panel heights so that end-of-runs and
finish posts can be used without field modification.
• Cannot be used above doors, or legacy videne
panels.
• Does not accept top feed modules.
• Glazed add-on panels may be retrofitted in the field
for use on glazed or fabric base panels. A retrofit kit is
available as a service part.
• Full-height side trim rails required for end-of-run
conditions with a base panel and one add-on panel,
separately specified.
• For two high add-on panel applications specify
separately full-height side trim rail for base panel and
one high add on, for two high panel add on location
use side trim rail that ships with add-on panel.
• Clerestory can be added above glazed add-on
panels. See Specification Guide for application
guidelines.
66
April 2008 / USA
Class AA – GSA: Open Market
Canadian Conversion Factor: Refer to haworth.com/Canada
1
Application Designation
F
Glazed add-on panel directly above fabric
base panel or fabric add-on panel.
G Glazed add-on panel directly above
glazed and open frame base panel or
glazed add-on panel, add $23 list.
2) Glazing color or glass pattern.
3) Trim color for frame, side trim rails and trim
strip.
UniGroup Too Price List
Monolithic Glazed Add-On Panel
UniGroup
Actual
Height
Glazed
12′′(305mm)
14′′(356mm)
18′′(457mm)
20′′(508mm)
24′′(610mm)
Width
Number 1
Clear/Bronze/
Frosted Price
English
Reeded Price
Checks Mix/
Vertical
Moire Price
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
EAG-112EAG-1812EAG-212EAG-3012EAG-312EAG-4212EAG-412EAG-5412EAG-512EAG-114EAG-1814EAG-214EAG-3014EAG-314EAG-4214EAG-414EAG-5414EAG-514EAG-118EAG-1818EAG-218EAG-3018EAG-318EAG-4218EAG-418EAG-5418EAG-518EAG-120EAG-1820EAG-220EAG-3020EAG-320EAG-4220EAG-420EAG-5420EAG-520EAG-124EAG-1824EAG-224EAG-3024EAG-324EAG-4224EAG-424EAG-5424EAG-524-
$471
519
546
571
595
621
645
666
683
$482
531
560
586
608
632
656
677
698
$528
595
621
645
670
695
721
732
752
$544
600
627
655
683
713
733
763
789
$633
658
681
706
731
756
781
807
824
NA
NA
$668
705
737
793
869
NA
930
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
$696
734
772
828
909
NA
997
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
$ 769
807
840
908
999
NA
1082
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
$ 803
840
877
945
1043
NA
1164
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
Product marked with this symbol available as GSA open market.
Class AA – GSA: Open Market
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
67
UniGroup Too Price List
Doors with Radius Steel Top Cap
UniGroup
Actual
Height
Single Door — Laminate
82′′(2083mm)
Width
Door
Swing
Number 1
Price
36′′(914mm)
42′′(1067mm)
Left
Left
EDS-380-B L
EDS-4280-B L
$1794
1905
Features
To Order, Specify:
• Includes complete panel assembly [hinge sets, carpet
gripper, door jamb, side trim rails, leveling glides and trim,
hollow core door (1 5/8′′(41mm) thick), door hinges,
hardware, brushed chrome knobs or ADA lever with lockset
and keys, and threshold].
• Both sides of door covered in same laminate surface color.
• Doors are shipped left-hand swing. Field-adjustable for
right-hand swing.
• No power or communications in base raceway.
1) Product number, including:
1
Handle Designation
K Knob
H ADA Lever, add $145 list.
2) Laminate surface color.
3) Trim color for raceway covers and glide
housings.
Specification Tips
4) Trim color for door jamb, top cap and side trim
rails.
• Door may be placed a maximum of 24′′(610mm) from
supporting panels at 90В°.
• Will not accept add-on panel.
NOTES:
Door Opening Clearance
Door Size
Height
Width
380
78′′(1981mm)
28 3/4′′(730mm)
4280
78′′(1981mm)
34 3/4′′(883mm)
Some building codes may restrict the use of
panel heights greater than 69 ′′(1753mm).
Consult your local code authority to assure
that the furniture layout is compliant prior to
installation.
EDS-BKL
EDS-BHL
Most building codes for new buildings require
a minimum clear door width of 32 ′′(813mm).
To meet this requirement, the 42 ′′(1067mm)
door must be ordered.
(Left-hand swing)
Single Door with ADA Lever
and Kick Plate — Laminate
Actual
Height
Width
Hardware
Door
Swing
Number
Price
82′′(2083mm)
42′′(1067mm)
Lever
Left
EAC-4280-BHL
$2813
Features
To Order, Specify:
• Includes complete panel assembly [hinge sets, carpet
gripper, door jamb, door (1 7/16′′(37mm) thick), door hinges,
brushed chrome lever with lockset and keys, threshold, and
brushed chrome kick plate with mounting screws].
• Both sides of door covered in same laminate surface color.
• Doors are shipped left-hand swing. Field-adjustable for
right-hand swing.
• No power or communications in base raceway.
1) Product number.
Specification Tips
NOTES:
• Door may be placed a maximum of 24′′(610mm) from
supporting panels at 90В°.
• Will not accept add-on panel.
Some building codes may restrict the use of
panel heights greater than 69 ′′(1753mm).
Consult your local code authority to assure
that the furniture layout is compliant prior to
installation.
Door Opening Clearance
Door Size
Height
Width
4280
78′′(1981mm)
34 3/4′′(883mm)
EAC-4280-BHL
(Left-hand swing)
68
April 2008 / USA
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Laminate surface color.
3) Trim color for raceway covers and glide
housings.
4) Trim color for door jamb, top cap and side trim
rails.
Most building codes for new buildings require
a minimum clear door width of 32 ′′(813mm).
To meet this requirement, the 42 ′′(1067mm)
door must be ordered.
UniGroup Too Price List
Doors with Radius Steel Top Cap
UniGroup
Actual
Height
Single Door — Glazed
82′′(2083mm)
Width
Number
36′′(914mm)
42′′(1067mm)
EDG-380-B
EDG-4280-B
1 2
Clear or
Bronze Price
Frosted
Price
$2400
2627
$2680
2914
Features
To Order, Specify:
• Includes complete panel assembly [hinge sets, carpet
gripper, door jamb, side trim rails and trim, door (1
5/8′′(41mm) thick with 1/4′′(6mm) glazing), door hinges,
hardware, brushed chrome knobs or ADA lever with lockset
and keys, and threshold].
• Both sides of door covered in same laminate surface color.
• Door swing not field changeable.
• No power or communications in base raceway.
1) Product number, including:
1
Handle Designation
K Knob
H ADA Lever, add $145 list.
2
Door Swing
L
Specification Tips
• Door may be placed a maximum of 24′′(610mm) from
supporting panels at 90В°.
• Will not accept add-on panel.
R Right
2) Glazing finish color.
3) Laminate surface color.
Door Opening Clearance
Door Size
Height
Width
380
78′′(1981mm)
28 3/4′′(730mm)
4280
78′′(1981mm)
34 3/4′′(883mm)
Left
4) Trim color for raceway covers and glide
housings.
5) Trim color for door jamb, top cap and side trim
rails.
NOTES:
EDG-BKL
EDG-BHL
(Left-hand swing)
Some building codes may restrict the use of
panel heights greater than 69 ′′(1753mm).
Consult your local code authority to assure
that the furniture layout is compliant prior to
installation.
Most building codes for new buildings require
a minimum clear door width of 32 ′′(813mm).
To meet this requirement, the 42 ′′(1067mm)
door must be ordered.
(Right-hand swing)
Single Door — Glazed, with
Classic Muntins
Actual
Height
82′′(2083mm)
Width
Number
36′′(914mm)
42′′(1067mm)
EDMC-380-B
EDMC-4280-B
1 2
Frosted
Price
$2936
3148
$3223
3435
Features
To Order, Specify:
• Includes complete panel assembly [hinge sets, carpet
gripper, door jamb, side trim rails and trim, door (1
5/8′′(41mm) thick with 1/4′′(6mm) glazing), door hinges,
hardware, brushed chrome knobs or ADA lever with lockset
and keys, threshold, and muntins].
• Both sides of door covered in same laminate surface color.
• Door swing not field changeable.
• No power or communications in base raceway.
1) Product number, including:
1
Handle Designation
K Knob
H ADA Lever, add $145 list.
2
Door Swing
Specification Tips
L
• Door may be placed a maximum of 24′′(610mm) from
supporting panels at 90В°.
• Will not accept add-on panel.
R Right
Door Opening Clearance
Door Size
Height
Width
380
78′′(1981mm)
28 3/4′′(730mm)
4280
78′′(1981mm)
34 3/4′′(883mm)
EDMC-BKL
EDMC-BHL
(Left-hand swing)
Clear or
Bronze Price
Left
2) Glazing finish color.
3) Laminate surface color.
4) Trim color for raceway covers and glide
housings.
5) Trim color for door jamb, top cap, muntins and
side trim rails.
NOTES:
Some building codes may restrict the use of
panel heights greater than 69 ′′(1753mm).
Consult your local code authority to assure
that the furniture layout is compliant prior to
installation.
(Right-hand swing)
Most building codes for new buildings require
a minimum clear door width of 32 ′′(813mm).
To meet this requirement, the 42 ′′(1067mm)
door must be ordered.
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
69
UniGroup Too Price List
if Panel Attached Screen
UniGroup
if Panel Attached Screen
Height
Width
Description
Number
Price
47′′(1194mm)
52′′(1321mm)
63′′(1600mm)
47′′(1194mm)
52′′(1321mm)
63′′(1600mm)
52′′(1321mm)
63′′(1600mm)
48′′(1219mm)
Fabric
48′′(1219mm)
Frosted Insert
48′′(1219mm)
Perforated Metal
BBP-4748-FH
BBP-5248-FH
BBP-6348-FH
BBP-4748-GH
BBP-5248-GH
BBP-6348-GH
BBP-5248-PH
BBP-6348-PH
$ 815
860
906
$ 999
1058
1116
$1087
1146
Features
BBP-FH
BBP-GH
BBP-PH
To Order, Specify:
• Includes screen, two non-locking casters on post legs and
attachment brackets.
• Fabric and perforated metal insert screens have no acoustical
or tackable value.
• Screens are non-load bearing.
• Magnets can be used with perforated metal inserts.
• Frosted insert is identical to frosted and textured acrylic
material used in if desktop screens.
• Brackets are shipped unassembled.
Fabric Insert
1) Product number.
2) Screen fabric insert color.
FB-1 Warm Neutral
FB-2 Cool Neutral
3) Metallic trim color for frame.
4) Trim color for panel attachment brackets.
5) Trim color for casters.
Specification Tips
• Screens can mount on any width panel but panel runs must
be at least 48′′(1219mm).
• Screens mount on a panel taller than height of screen only.
• Screen adds 2′′(51mm) to panel width in stored position.
• Screen extends 42′′(1067mm) from end of panel in fully
extended position.
• Screens mount parallel with panel, off panel end only.
• Screen adds 2′′(51mm) to panel thickness.
• Bracket is panel specific to UniGroup Too, UniGroup and
PLACES.
• Panel attached screen brackets may interfere with
components mounted to opposite side of panel.
• Fabric screen insert available in warm and cool neutral only.
• Screens are non-handed; brackets can be attached to either
side.
• See Specification Guide for additional information.
70
April 2008 / USA
Class IF – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
Frosted Insert
1) Product number.
2) Trim color for frame.
3) Trim color for panel attachment brackets.
4) Metal trim color for casters.
Metal Insert
1) Product number.
2) Trim color for frame.
3) Trim color for perforated metal insert.
4) Trim color for panel attachment brackets.
5) Metallic trim color for casters.
UniGroup Too Price List
Panel Accessories
UniGroup
Painted Muntin Kit — Classic
Panel
Height
Panel
Width
Number
Price
44′′(1118mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
MSC-1842
MSC-242
MSC-3042
MSC-342
MSC-4242
MSC-442
MSC-542
MSC-1866
MSC-266
MSC-3066
MSC-366
MSC-4266
MSC-466
MSC-566
MSC-1880
MSC-280
MSC-3080
MSC-380
MSC-4280
MSC-480
MSC-580
$350
353
387
390
433
436
458
$391
394
433
436
486
489
510
$421
425
467
470
524
527
554
68′′(1727mm)
82′′(2083mm)
MSC
Features
To Order, Specify:
• Includes set of muntins for each side of glazed panel, and
attachment hardware.
• Requires field assembly.
• Apply to glazed panels in heights and widths listed.
• Muntins are 1/2′′(12mm) thick.
1) Product number.
2) Trim color.
Specification Tips
• Glazed panel must be separately specified.
• Applicable to UniGroup and PLACES glazed panels.
Painted Muntin Kit —
Horizontal
44′′(1118mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
48′′(1219mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
48′′(1219mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
48′′(1219mm)
60′′(1524mm)
68′′(1727mm)
82′′(2083mm)
MSH
MSH-142
MSH-1842
MSH-242
MSH-3042
MSH-342
MSH-442
MSH-542
MSH-166
MSH-1866
MSH-266
MSH-3066
MSH-366
MSH-466
MSH-566
MSH-180
MSH-1880
MSH-280
MSH-3080
MSH-380
MSH-480
MSH-580
Features
To Order, Specify:
• Includes set of muntins for each side of glazed panel, and
attachment hardware.
• Requires field assembly.
• Apply to glazed panels in heights and widths listed.
• Muntins are 1/2′′(12mm) thick.
1) Product number.
$181
261
300
320
331
377
394
$222
318
353
374
390
436
458
$240
347
383
411
423
471
500
2) Trim color.
Specification Tips
• Glazed panel must be separately specified.
• Applicable to UniGroup and PLACES glazed panels.
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
71
UniGroup Too Price List
Panel Accessories
UniGroup
Wainscot Kit
Painted Rail — Fabric Panel
Installed
Height
Panel
Width
Number
Price
30′′(762mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
WK-129
WK-1829
WK-229
WK-3029
WK-329
WK-4229
WK-429
WK-529
$268
285
293
308
315
330
337
352
Features
To Order, Specify:
• Includes set of two (2) recessed fabric panels (1 for each
side), two (2) rails, and attachment hardware.
• Requires field assembly.
• Apply to both sides of any glazed panel.
• For mixed fabric surfaces, specify fabric/color for each side.
1) Product number.
Specification Tips
2) Fabric/colorway for panel side one.
3) Fabric/colorway for panel side two.
4) Rail trim color. $23 upcharge (list) for Metallic
trim color.
• Glazed panel must be separately specified.
• Can be used with UniGroup Too, UniGroup and PLACES
glazed panels.
WK
Wainscot with Horizontal
Muntins — Painted Rail and
Muntins — Fabric Panel
68′′(1727mm)
82′′(2083mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
WMSH-166
WMSH-1866
WMSH-266
WMSH-3066
WMSH-366
WMSH-4266
WMSH-466
WMSH-566
WMSH-180
WMSH-1880
WMSH-280
WMSH-3080
WMSH-380
WMSH-4280
WMSH-480
WMSH-580
$492
602
657
691
720
757
792
827
$517
621
689
727
757
792
820
861
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
WMSC-1866
WMSC-266
WMSC-3066
WMSC-366
WMSC-4266
WMSC-466
WMSC-566
WMSC-1880
WMSC-280
WMSC-3080
WMSC-380
WMSC-4280
WMSC-480
WMSC-580
$696
720
759
785
832
860
902
$718
741
783
810
858
888
931
WMSH
Wainscot with Classic Muntins 68′′(1727mm)
Painted — Rail and Muntins —
Fabric Panel
82′′(2083mm)
WMSC
Common Features
To Order, Specify:
• Includes set of two (2) recessed fabric panels (1 for each side),
two (2) rails, set of muntins for each side, and attachment
hardware.
• Requires field assembly.
• Apply to both sides of glazed panels in sizes listed.
• For mixed fabric surfaces, specify fabric/color for each side.
1) Product number.
Specification Tips
• Glazed panel must be separately specified.
• Can be used with UniGroup and PLACES glazed panels.
72
April 2008 / USA
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Fabric/colorway for panel side one.
3) Fabric/colorway for panel side two.
4) Rail/muntin trim color.
UniGroup Too Price List
Panel Accessories
UniGroup
Actual
Height
90° Finish Post —
Radius Wood Top Cap—
Fabric Surface
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Number
Price
2′′(51mm)
PFWC-28-B
PFWC-35-B
PFWC-42-B
PFWC-48-B
PFWC-54-B
PFWC-62-B
PFWC-66-B
PFWC-80-B
$113
116
123
128
132
135
144
150
Features
To Order, Specify:
• Includes 90° fabric vertical cover, radius wood top cap and
base raceway cover.
• Required by UL for covering base raceway flexible and
straight-span power connectors when power connector
covers are not used.
• Finish posts are required for wood top cap panel
configurations.
1) Product number.
2) Fabric surface and color.
3) Trim color for raceway cover.
4) Wood finish color for top cap.
PFWC-B
90° Finish Post —
Radius Steel Top Cap—
Fabric Surface
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
2′′(51mm)
FPFC-28-B
FPFC-35-B
FPFC-42-B
FPFC-48-B
FPFC-54-B
FPFC-62-B
FPFC-66-B
FPFC-80-B
Features
To Order, Specify:
• Includes 90° fabric vertical cover, radius steel top cap and
base raceway cover.
• Required by UL for covering base raceway flexible and
straight-span power connectors when power connector
covers are not used.
1) Product number.
$72
75
78
83
85
86
95
97
2) Fabric surface and color.
3) Trim color for raceway cover.
4) Trim color for top cap.
FPFC-B
90° Finish Post —
Radius Steel Top Cap—
Painted Surface
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
2′′(51mm)
FPPC-28-B
FPPC-35-B
FPPC-42-B
FPPC-48-B
FPPC-54-B
FPPC-62-B
FPPC-66-B
FPPC-80-B
Features
To Order, Specify:
• Includes 90° painted vertical cover, radius steel top cap and
base raceway cover.
• Required by UL for covering base raceway flexible and
straight-span power connectors when power connector
covers are not used.
1) Product number.
$70
73
76
81
83
84
93
95
2) Paint surface color.
3) Trim color for raceway cover.
4) Trim color for top cap.
FPPC-B
90° Power Connector Cover —
Radius Profile
4′′(102mm)
PCC-90-B
Features
To Order, Specify:
• Includes six power connector covers.
• Required by UL for covering flexible power connector in 90°
panel configurations when a finish post is not used.
1) Product number.
$55
2) Trim color.
Specification Tip
PCC-90-B
• For use with UniGroup and PLACES panels.
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
73
UniGroup Too Price List
Panel Accessories
UniGroup
Actual
Height
120° Finish Post —
Radius Steel Top Cap —
Fabric Surface
44′′(1118mm)
64′′(1626mm)
Width
Number
Price
2′′(51mm)
SPLB-2878
SPLA-1524
$225
236
Features
To Order, Specify:
• Includes 120° fabric vertical cover and radius steel cap and
base raceway cover.
• Required by UL for covering raceway flexible and
straight-span power connectors when power connector
covers are not available.
1) Product number.
SPLA-1524
SPLB-2878
74
April 2008 / USA
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Fabric surface and color.
3) Trim color for raceway cover.
4) Trim color for top cap.
UniGroup Too Price List
Panel Accessories
UniGroup
Actual
Height
180° Finish Post — Radius
Wood Top Cap — Fabric
Surface
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Number
Price
2′′(51mm)
PFWS-28-B
PFWS-35-B
PFWS-42-B
PFWS-48-B
PFWS-54-B
PFWS-62-B
PFWS-66-B
PFWS-80-B
$ 75
80
84
90
96
97
100
105
Features
To Order, Specify:
• Includes 180° fabric vertical cover, radius wood top cap and
base raceway cover.
• Required by UL for covering base raceway flexible and
straight-span power connectors when power connector
covers are not used.
• Finish posts are required for wood top cap panel
configurations.
1) Product number.
2) Fabric surface and color.
3) Trim color for raceway cover.
4) Wood finish color for top cap.
PFWS-B
180° Finish Post — Radius Steel 30′′(762mm)
37′′(940mm)
Top Cap — Fabric Surface
2′′(51mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
FPFS-28-B
FPFS-35-B
FPFS-42-B
FPFS-48-B
FPFS-54-B
FPFS-62-B
FPFS-66-B
FPFS-80-B
Features
To Order, Specify:
• Includes 180° fabric vertical cover, radius steel top cap and
base raceway cover.
• Required by UL for covering base raceway flexible and
straight-span power connectors when power connector
covers are not used.
1) Product number.
$60
65
69
75
76
79
83
88
2) Fabric surface and color.
3) Trim color for raceway cover.
4) Trim color for top cap.
FPFS-B
180° Finish Post — Radius Steel 30′′(762mm)
37′′(940mm)
Top Cap — Painted Surface
2′′(51mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
FPPS-28-B
FPPS-35-B
FPPS-42-B
FPPS-48-B
FPPS-54-B
FPPS-62-B
FPPS-66-B
FPPS-80-B
Features
To Order, Specify:
• Includes 180° painted vertical cover, radius steel top cap and
base raceway cover.
• Required by UL for covering base raceway flexible and
straight-span power connectors when power connector
covers are not used.
1) Product number.
$58
63
67
73
74
77
81
86
2) Paint surface color.
3) Trim color for raceway cover.
4) Trim color for top cap.
FPPS-B
180В° Power Connector Cover
4′′(102mm)
PCC-180-B
Features
To Order, Specify:
• Includes six power connector covers.
• Required by UL for covering straight-span or flexible power
connectors in 180В°, three-way panel configurations when a
finish post is not used.
1) Product number.
$55
2) Trim color.
PCC-180-B
Specification Tip
• For use with UniGroup Too, UniGroup and PLACES panels.
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
75
UniGroup Too Price List
Panel Accessories
UniGroup
Actual
Height
End-of-Run Finish Post —
Radius Wood Top Cap —
Wood Surface
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Depth or
Thickness
2′′(51mm)
1/2′′(13mm)
Number
Price
ERRW-28-B
ERRW-35-B
ERRW-42-B
ERRW-48-B
ERRW-54-B
ERRW-62-B
ERRW-66-B
ERRW-80-B
$ 95
104
116
128
142
158
169
206
Features
To Order, Specify:
• Includes wood vertical cover, radius wood top cap and base
raceway cover.
• Required for wood top cap panel configurations whenever
metal side rail is exposed at end of panel run.
1) Product number.
2) Wood finish color.
ERRW-B
End-of-Run — Variable Height
Finish Post Coped End —
Radius Wood Top Cap —
Wood Surface
ERRW
4′′(102mm)
6′′(152mm)
7′′(178mm)
8′′(203mm)
12′′(305mm)
13′′(330mm)
14′′(356mm)
18′′(457mm)
19′′(483mm)
20′′(508mm)
24′′(610mm)
26′′(660mm)
27′′(686mm)
31′′(787mm)
32′′(813mm)
34′′(864mm)
38′′(965mm)
45′′(1143mm)
52′′(1321mm)
2′′(51mm)
1/2′′(13mm)
Features
To Order, Specify:
• Includes wood vertical cover with coped end and radius wood
top cap.
• Required for wood top cap panel configurations whenever
metal side rail is exposed at end of panel run.
• Install on exposed portion of taller panel side rail where two
panels of different heights meet, or
• Install in conjunction with finish posts with variable height
condition.
• Determine correct height by subtracting the height of the
shorter panel from the height of the taller panel.
1) Product number.
Specification Tips
• For exposed portion of taller panel where two or more sides
meet. Order taller finish post and field cut straight edge.
• Use for in-line panel applications.
76
April 2008 / USA
ERRW-4
ERRW-6
ERRW-7
ERRW-8
ERRW-12
ERRW-13
ERRW-14
ERRW-18
ERRW-19
ERRW-20
ERRW-24
ERRW-26
ERRW-27
ERRW-31
ERRW-32
ERRW-34
ERRW-38
ERRW-45
ERRW-52
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Wood finish color.
$ 45
47
51
57
64
65
68
76
80
81
87
89
90
102
103
104
112
118
131
UniGroup Too Price List
Panel Accessories
UniGroup
Height
Radius Steel Top Cap for 3-Way 3/4′′(19mm)
and 4-Way
Feature
Width
Depth
Number
Price
2′′(51mm)
2′′(51mm)
FPC-2
$20
To Order, Specify:
• Includes one plastic top cap.
• Fills gap at intersection of four UniGroup radius steel top cap
panels.
1) Product number.
2) Trim color.
FPC-2
90В° Top Cap for Radius Wood
Top Cap — Wood Surface
7/8′′(22mm)
2′′(51mm)
2′′(51mm)
FPCW-2
Features
To Order, Specify:
• Includes one cap and mounting hardware.
• Fills gap at intersection of four UniGroup radius wood top cap
panels.
1) Product number.
$38
2) Wood finish color.
FPCW-2
7/8′′(22mm)
90В° Top Cap for 2-Way and
3-Way — Radius Wood Top Cap
PCCW-2
(90В° Finish Post Cap)
2′′(51mm)
PCCW-2
PCSW-2
Features
To Order, Specify:
• Includes one cap and mounting hardware.
• For field replacement only.
1) Product number.
$ 37
37
2) Wood finish color.
PCSW-2
(180В° Finish Post Cap)
Radius Wood Top Cap Kit
TCSW
2′′(51mm)
7/8′′(22mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
2′′(51mm)
TCSW-1
TCSW-18
TCSW-2
TCSW-30
TCSW-3
TCSW-42
TCSW-4
TCSW-54
TCSW-5
Features
To Order, Specify:
• Includes top cap, panel alignment clip and mounting
hardware.
• For replacement of radius steel and radius wood top cap.
1) Product number.
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
$ 47
62
78
95
108
122
137
153
168
2) Wood finish color.
April 2008 / USA
77
UniGroup Too Price List
Panel Accessories
UniGroup
Full-Height Side Trim Rails —
for use with Add-On Panels
Base Panel Height/
Add-On Panel
Number
Price
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
64′′(1626mm)
68′′(1727mm)
68′′(1727mm)
82′′(2083mm)
82′′(2083mm)
30′′(762mm)/14′′(356mm)
30′′(762mm)/20′′(508mm)
44′′(1118mm)/12′′(305mm)
44′′(1118mm)/20′′(508mm)
44′′(1118mm)/24′′(610mm)
50′′(1270mm)/14′′(356mm)
50′′(1270mm)/18′′(457mm)
56′′(1422mm)/12′′(305mm)
64′′(1626mm)/18′′(457mm)
68′′(1727mm)/14′′(356mm)
SREH-2814
SREH-2820
SREH-4212
SREH-4220
SREH-4224
SREH-4814
SREH-4818
SREH-5412
SREH-6218
SREH-6614
$51
64
73
77
77
85
85
85
88
88
Feature
To Order, Specify:
• Includes one full height side trim rail.
1) Product number.
Specification Tips
2) Trim color.
• For use with base panel and one add-on panel.
• For two high add-on panel applications specify separately
full-height side trim rail for base panel and one high add-on,
for two high panel location use side trim rail that ships with
add-on panel. See Specification Guide for application
guidelines.
SREH
Side Trim Rail
SRE
Hinges
HE
78
Height
April 2008 / USA
Panel Height
Number
Price
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
SRE-28
SRE-35
SRE-42
SRE-48
SRE-54
SRE-62
SRE-66
SRE-80
$ 56
56
56
63
63
67
71
74
Features
To Order, Specify:
•
•
•
•
•
1) Product number.
Includes one side trim rail.
Specify two side rails for each condition.
Two side rails are included with each panel.
Order as replacement only.
For UniGroup panels only.
Panel
Height
Hinge
Width
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
1 1/8′′(29mm)
2) Trim color.
Number
Price
HE-28
HE-35
HE-42
HE-48
HE-54
HE-62
HE-66
HE-80
$ 9
9
10
11
11
12
13
16
Features
To Order, Specify:
• Includes one hinge set for one side of trim rail.
• For replacement only (hinges are included with panels).
• One hinge set connects every two panels for angular
connections.
• Two hinges set are used for straight-line conditions.
1) Product number.
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Trim color.
UniGroup Too Price List
Panel Accessories
UniGroup
Wall Track
Height
Depth
Width
Number
Price
60′′(1524mm)
72′′(1829mm)
84′′(213mm)
3/4′′(19mm)
5/8′′(16mm)
WT-60
WT-72
WT-84
$101
123
137
Features
To Order, Specify:
• Includes two wall tracks and attachment screws
(#10 2 1/2′′ long).
• For attachment of components to structural walls.
• See installation instructions for proper mounting.
1) Product number.
2) Trim color for screws.
3) Trim color for track.
Specification Tip
• Not for use with up-mount overhead storage unit.
WT
Wall Mount Kit
WMK
Panel
Height
Number
Price
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
WMK-30
WMK-35
WMK-42
WMK-48
WMK-54
WMK-62
WMK-66
WMK-80
$ 54
64
71
79
88
102
107
130
Features
To Order, Specify:
• Includes wall-mount channel, hinges and screws.
• For mounting panels, with or without add-on panel, to a
structural wall.
• Adds 1/4′′(6mm) to the panel width.
1) Product number.
2) Trim color.
Specification Tip
• Must be properly anchored to a structural wall.
T-Mount Kit — Center and End
Conditions
TMKT-B
Panel
Height
Number
Price
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
TMKT-28-B
TMKT-35-B
TMKT-42-B
TMKT-48-B
TMKT-54-B
TMKT-62-B
TMKT-66-B
TMKT-80-B
$ 79
85
89
101
110
129
136
153
Features
To Order, Specify:
• Includes pre-drilled side rail, center-mount brackets,
end-mount brackets, light block extrusions, glide housing, and
screws.
• Brackets included for both center- and end-mount
T-conditions.
• Connects two panels in a T-condition. T-mount can attach to
a base panel and one fabric add-on panel. Configuration
coming off of a T-mount cannot contain add-on panels.
1) Product number.
2) Trim color.
Specification Tips
• Both panels in a T-mount condition must be of equal height.
• Cannot mount on glazed panels, glazed add-on panels or
doors.
• For use with UniGroup panels.
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
79
UniGroup Too Price List
Panel Accessories
UniGroup
All-Purpose Hook
Actual
Height
Depth
Width
Number
Price
1′′(25mm)
3′′(76mm)
5/8′′(16mm)
CH-8
$80
Features
To Order, Specify:
• Includes eight hooks.
• Attaches to panel steel top cap.
• For use with UniGroup panels only.
1) Product number.
2) Trim color.
CH-8
Class AA
HAB-0001
Seismic Anchoring Bracket
$125
Features
To Order, Specify:
• Includes package of six formed steel brackets.
• For seismic anchoring of UniGroup Too, UniGroup and
PLACES panels.
1) Product number.
(No finish specification required.)
HAB
Class BA
7031-0501
Friction Pad
Feature
To Order, Specify:
• Includes six pads.
1) Product number.
(No finish specification required.)
Specification Tip
• Attaches to bottom of glide to prevent movement of panels on
hard surface flooring.
7031-0501
Class BA
2/90 Sign Systems
2/90 Sign Systems is a recommended signage
program for use with Haworth Systems. Signage
options include ADA-compliant panel-mounted
name signs, department signs, building directories,
in/out boards, restroom and no smoking signs.
For inquiries, catalogs or orders, contact System
2/90 directly at 1-800-777-4310, fax (616) 656-4300,
P.O. Box 888289, Grand Rapids, MI 49588-8289.
80
April 2008 / USA
$6
SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Panel Accessories
UniGroup
Pre-hinged Side Trim Rails —
Angled or Straight-Line
Conditions
HIAE (Angled)
HISE (Straight)
Panel
Height
Angled
Number
Price
Straight
Number
Price
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
HIAE-28
HIAE-35
HIAE-42
HIAE-48
HIAE-54
HIAE-62
HIAE-66
HIAE-80
$ 65
77
86
95
106
114
125
142
HISE-28
HISE-35
HISE-42
HISE-48
HISE-54
HISE-62
HISE-66
HISE-80
$ 81
92
104
114
125
133
146
164
Features
To Order, Specify:
•
•
•
•
1) Product number.
Specify pre-hinged trim rails to reduce the installation time.
Angled hinges contain two trim rails and one hinge set.
Straight line hinges contain two rails and two hinge sets.
For panels using pre-hinged trim rails, order fabric panels
without side trim rails using the instructions below.
• Available for UniGroup fabric panels only.
• Not for use with Add-on panels.
2) Trim color.
Use the following chart to determine the number of pre-hinged trim rails, additional trim rails and hinges needed:
Pre-hinged Trim Rails
Condition
Straight
Angled
HISE
Straight/In-line
2-Way/Corner
3-Way
4-Way
End of Run
Side Trim Rail
Hinge Kits
HIAE
SRE
HE
1
1
2
1
1
2
1
1
Options
• To order a panel with no raceway cover, add an E suffix to
the product number and deduct the amount shown below
(based on panel width).
• To order a fabric panel with no side trim rails, add a J
suffix to the product number and deduct the amount shown
below (based on panel height).
• To order a fabric panel with no raceway cover and side
trim rails, add a K suffix to the product number and deduct
the amount shown below (based on panel width and height).
Panel Width
Non-powered Panels
Panel
Height
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
12′′(305mm)
Option J
no side
trim rails
-$50
-59
-66
-74
-84
-91
-98
-114
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)
Option E no raceway cover
-$ 26
-$36
-$44
-$46
-$50
-$57
-$60
-$63
-$69
-78
-85
-92
-101
-110
-118
-125
-141
-86
-92
-102
-109
-118
-128
-133
-151
-95
-102
-110
-117
-128
-135
-141
-159
-97
-105
-112
-119
-130
-138
-144
-161
-102
-109
-117
-125
-134
-142
-149
-166
-108
-114
-124
-131
-140
-149
-155
-171
-110
-117
-126
-133
-142
-152
-158
-174
-113
-122
-130
-137
-146
-155
-161
-179
-119
-128
-135
-142
-153
-161
-167
-184
12′′(305mm)
18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)
Option K
no raceway
cover and
side trim
rails
Panel Width
Powered Panels
Panel
Height
Examples:
EMN-366-BE Panel without raceway cover
EMN-366-BJ Panel without side trim rails
EMN-366-BK Panel without raceway cover
and side trim rails
Option J
no side
trim rails
-$50
-59
-66
-74
-84
-91
-98
-114
Option E no raceway cover
N/A
-$48
-$56
-$59
-$68
-$74
-$80
-$86
-$92
-100
-107
-114
-123
-132
-140
-146
-163
-107
-113
-123
-130
-139
-147
-154
-170
-109
-116
-125
-132
-141
-151
-156
-172
-118
-126
-134
-141
-152
-160
-166
-183
-125
-132
-140
-147
-158
-140
-171
-189
-131
-138
-146
-154
-163
-171
-179
-194
-137
-144
-153
-160
-169
-179
-184
-201
-144
-152
-160
-167
-177
-185
-191
-208
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
Option K
no raceway
cover and
side trim
rails
April 2008 / USA
81
UniGroup Too Price List
Monolithic Wood Panel with Low Profile Wood Top Cap
PLACES
Wood
Features
Specification Tips
• Includes non-powered or powered panel assembly,
low profile top cap with aligner, with or without
one-piece base raceway cover, 1.6 hinge kits, side
trim rails, leveling glides and carpet gripper; power
distribution assembly/flex connector(s) when power is
specified. 6 base raceway end caps are shipped with
each panel. Order additional as necessary.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
• Wood top cap panels require finish posts,
including end conditions and variable height
conditions.
• Panels will accept add-on panels up to a
combined height of 82″(2083mm). For aesthetic
consistency, specify PLACES add-on panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
To Order, Specify:
1) Product number.
2) Wood finish color for panel side one.
3) Wood finish color for panel side two.
HWN-T (Non Powered)
C
R
HWP-T (3-Circuit Powered)
HWP-T6 (6-Circuit Powered)
4) Trim color for raceway cover, glide housings,
end caps and side trim rails.
5) Wood finish color for top cap.
US
Non-Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Non-Powered (Example: HWN-4864-T) product numbers and list prices shown on opposite page:
Panel Width
Non-Powered without
Base Raceway Cover
(Example: HWN-4864-TE)
3-Circuit Powered
(Example: HWP-4864-T)
6-Circuit Powered
(Example: HWP-4864-T6)
or
or
NYC 3-Circuit Powered
(Example: HWP-4864-TY)
3-Circuit Powered without
Base Raceway Cover
(Example: HWP-4864-TE)
6-Circuit Powered without
Base Raceway Cover
(Example: HWP-4864-T6E)
or
or
NYC 6-Circuit Powered
(Example: HWP-4864-T6Y)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: HWP-4864-TYE)
NYC 6-Circuit Powered
without Base Raceway Cover
(Example: HWP-4864-T6YE)
Add:
Deduct:
Add:
Add:
Add:
12′′(305mm)
-$26
$155*
n/a
n/a
n/a
18′′(457mm)
-36
155
n/a
$107
n/a
24′′(610mm)
-44
155
$276
99
$220
30′′(762mm)
-46
155
276
96
217
36′′(914mm)
-50
155
276
87
208
42′′(1067mm)
-57
155
276
81
202
48′′(1219mm)
-60
155
276
75
196
*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Non-powered panels ship without receptacle ports in the base raceway cover.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
• For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power
Logic.
• For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.
82
April 2008 / USA
Class DA – GSA: Open Market
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Monolithic Wood Panel with Low Profile Wood Top Cap
PLACES
Actual
Height
Wood
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Non-Powered
Number
Wood Finish Group
I
II
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
HWN-1230- T
HWN-1830- T
HWN-2430- T
HWN-3030- T
HWN-3630- T
HWN-4230- T
HWN-4830- T
HWN-1237- T
HWN-1837- T
HWN-2437- T
HWN-3037- T
HWN-3637- T
HWN-4237- T
HWN-4837- T
HWN-1244- T
HWN-1844- T
HWN-2444- T
HWN-3044- T
HWN-3644- T
HWN-4244- T
HWN-4844- T
HWN-1250- T
HWN-1850- T
HWN-2450- T
HWN-3050- T
HWN-3650- T
HWN-4250- T
HWN-4850- T
HWN-1256- T
HWN-1856- T
HWN-2456- T
HWN-3056- T
HWN-3656- T
HWN-4256- T
HWN-4856- T
HWN-1264- T
HWN-1864- T
HWN-2464- T
HWN-3064- T
HWN-3664- T
HWN-4264- T
HWN-4864- T
HWN-1268- T
HWN-1868- T
HWN-2468- T
HWN-3068- T
HWN-3668- T
HWN-4268- T
HWN-4868- T
HWN-1282- T
HWN-1882- T
HWN-2482- T
HWN-3082- T
HWN-3682- T
HWN-4282- T
HWN-4882- T
$ 771
863
950
1087
1173
1295
1399
$ 811
914
1004
1133
1240
1365
1458
$ 858
969
1052
1181
1270
1393
1487
$ 895
1018
1102
1230
1338
1468
1569
$ 932
1066
1136
1275
1408
1536
1721
$ 970
1113
1161
1321
1472
1602
1700
$1035
1190
1253
1420
1581
1714
1825
$1178
1418
1532
1738
1941
2114
2248
$ 784
877
963
1102
1188
1310
1417
$ 824
928
1020
1152
1259
1384
1481
$ 869
982
1069
1195
1289
1419
1510
$ 910
1036
1118
1249
1358
1490
1595
$ 943
1078
1153
1299
1432
1563
1748
$ 983
1131
1184
1344
1494
1627
1727
$1054
1206
1272
1443
1607
1744
1862
$1197
1437
1555
1766
1973
2147
2287
Product marked with this symbol available as GSA open market.
Class DA – GSA: Open Market
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
83
UniGroup Too Price List
Monolithic Wood/Fabric Panel with Low Profile Wood Top Cap
PLACES
Wood/Fabric
Features
Specification Tips
• Includes non-powered or powered panel assembly,
low profile top cap with aligner, with or without
one-piece base raceway cover, 1.6 hinge kits, side
trim rails, leveling glides and carpet gripper; power
distribution assembly/flex connector(s) when power is
specified. .6 base raceway end caps are shipped with
each panel. Order additional as necessary.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
• Wood top cap panels require finish posts,
including end conditions and variable height
conditions.
• Panels will accept add-on panels up to a
combined height of 82″(2083mm). For aesthetic
consistency, specify PLACES add-on panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
To Order, Specify:
1) Product number.
2) Wood finish color for panel side one.
3) Fabric/colorway for panel side two.
HWFN-T (Non Powered)
C
R
4) Trim color for raceway cover, glide housings,
end caps and side trim rails.
HWFP-T (3-Circuit Powered)
HWFP-T6 (6-Circuit Powered)
5) Wood finish color for top cap.
US
NOTE:
This panel has fabric/colorway
restrictions, see systems fabrics/
color legend.
Non-Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Non-Powered (Example: HWFN-4864-T) product numbers and list prices shown on opposite page:
Panel Width
Non-Powered without
Base Raceway Cover
(Example: HWFN-4864-TE)
3-Circuit Powered
(Example: HWFP-4864-T)
6-Circuit Powered
(Example: HWFP-4864-T6)
or
or
NYC 3-Circuit Powered
(Example: HWFP-4864-TY)
3-Circuit Powered without
Base Raceway Cover
(Example: HWFP-4864-TE)
6-Circuit Powered without
Base Raceway Cover
(Example: HWFP-4864-T6E)
or
or
NYC 6-Circuit Powered
(Example: HWFP-4864-T6Y)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: HWFP-4864-TYE)
NYC 6-Circuit Powered
without Base Raceway Cover
(Example: HWFP-4864-T6YE)
Add:
Deduct:
Add:
Add:
Add:
12′′(305mm)
-$26
$155*
n/a
n/a
n/a
18′′(457mm)
-36
155
n/a
$107
n/a
24′′(610mm)
-44
155
$276
99
$220
30′′(762mm)
-46
155
276
96
217
36′′(914mm)
-50
155
276
87
208
42′′(1067mm)
-57
155
276
81
202
48′′(1219mm)
-60
155
276
75
196
*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Non-powered panels ship without receptacle ports in the base raceway cover.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
• For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power
Logic.
• For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.
84
April 2008 / USA
Class DA – GSA: Open Market
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Monolithic Wood/Fabric Panel with Low Profile Wood Top Cap
PLACES
Actual
Height
Wood/Fabric
Wood Group I
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Non-Powered
Number
Wood Group I
Fabric Grade
A
B
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
HWFN-1230- T
HWFN-1830- T
HWFN-2430- T
HWFN-3030- T
HWFN-3630- T
HWFN-4230- T
HWFN-4830- T
HWFN-1237- T
HWFN-1837- T
HWFN-2437- T
HWFN-3037- T
HWFN-3637- T
HWFN-4237- T
HWFN-4837- T
HWFN-1244- T
HWFN-1844- T
HWFN-2444- T
HWFN-3044- T
HWFN-3644- T
HWFN-4244- T
HWFN-4844- T
HWFN-1250- T
HWFN-1850- T
HWFN-2450- T
HWFN-3050- T
HWFN-3650- T
HWFN-4250- T
HWFN-4850- T
HWFN-1256- T
HWFN-1856- T
HWFN-2456- T
HWFN-3056- T
HWFN-3656- T
HWFN-4256- T
HWFN-4856- T
HWFN-1264- T
HWFN-1864- T
HWFN-2464- T
HWFN-3064- T
HWFN-3664- T
HWFN-4264- T
HWFN-4864- T
HWFN-1268- T
HWFN-1868- T
HWFN-2468- T
HWFN-3068- T
HWFN-3668- T
HWFN-4268- T
HWFN-4868- T
HWFN-1282- T
HWFN-1882- T
HWFN-2482- T
HWFN-3082- T
HWFN-3682- T
HWFN-4282- T
HWFN-4882- T
$ 639
710
776
896
956
1058
1125
$ 671
753
824
931
1009
1115
1183
$ 706
793
858
966
1026
1131
1201
$ 734
835
898
1000
1080
1181
1263
$ 744
852
900
1015
1102
1206
1392
$ 789
904
937
1066
1178
1282
1358
$ 843
967
1009
1144
1264
1375
1453
$ 957
1158
1249
1414
1575
1709
1812
$ 657
728
794
914
981
1083
1150
$ 689
771
842
949
1034
1140
1208
$ 724
811
876
984
1051
1156
1226
$ 752
853
916
1018
1105
1206
1288
$ 763
871
919
1034
1128
1232
1418
$ 809
924
957
1086
1205
1309
1385
$ 863
987
1029
1164
1291
1402
1480
$ 977
1178
1269
1434
1602
1736
1839
C
D
E
F
G
$ 686
757
823
943
1018
1120
1187
$ 718
800
871
978
1071
1177
1245
$ 753
840
905
1013
1088
1193
1263
$ 781
882
945
1047
1142
1243
1325
$ 793
901
949
1064
1166
1270
1456
$ 840
955
988
1117
1244
1348
1424
$ 894
1018
1060
1195
1330
1441
1519
$1008
1209
1300
1465
1641
1775
1878
$ 710
781
847
967
1046
1148
1215
$ 742
824
895
1002
1099
1205
1273
$ 777
864
929
1037
1116
1221
1291
$ 805
906
969
1071
1170
1271
1353
$ 819
927
975
1090
1200
1304
1490
$ 868
983
1016
1145
1284
1388
1464
$ 922
1046
1088
1223
1370
1481
1559
$1036
1237
1328
1493
1681
1815
1918
$ 717
788
854
974
1052
1154
1221
$ 749
831
902
1009
1105
1211
1279
$ 784
871
936
1044
1122
1227
1297
$ 812
913
976
1078
1175
1276
1358
$ 827
935
983
1098
1210
1314
1500
$ 873
988
1021
1150
1293
1404
1480
$ 927
1051
1093
1228
1393
1504
1582
$1041
1242
1333
1498
1730
1864
1967
$ 722
793
859
979
1058
1160
1227
$ 754
836
907
1014
1111
1217
1285
$ 789
876
941
1049
1135
1240
1310
$ 817
918
981
1083
1189
1306
1388
$ 835
943
991
1106
1221
1346
1532
$ 878
993
1026
1155
1303
1441
1517
$ 932
1056
1098
1233
1433
1544
1622
$1046
1247
1351
1516
1779
1913
2016
$ 727
798
864
984
1063
1165
1232
$ 759
841
912
1019
1123
1229
1297
$ 794
881
946
1054
1161
1266
1336
$ 822
923
986
1088
1215
1335
1417
$ 839
950
998
1113
1249
1380
1566
$ 884
999
1037
1166
1332
1480
1556
$ 938
1062
1114
1249
1475
1586
1664
$1052
1253
1376
1541
1829
1963
2066
Product marked with this symbol available as GSA open market.
Class DA – GSA: Open Market
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
85
UniGroup Too Price List
Monolithic Wood/Fabric Panel with Low Profile Wood Top Cap
PLACES
Actual
Height
Wood/Fabric
Width
Wood Group II
30′′(762mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
37′′(940mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
44′′(1118mm) 12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
50′′(1270mm) 12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
56′′(1422mm) 12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
64′′(1626mm) 12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
68′′(1727mm) 12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
82′′(2083mm) 12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
Non-Powered
Number
Wood Group II
Fabric Grade
A
B
C
D
E
F
G
HWFN-1230- T
HWFN-1830- T
HWFN-2430- T
HWFN-3030- T
HWFN-3630- T
HWFN-4230- T
HWFN-4830- T
HWFN-1237- T
HWFN-1837- T
HWFN-2437- T
HWFN-3037- T
HWFN-3637- T
HWFN-4237- T
HWFN-4837- T
HWFN-1244- T
HWFN-1844- T
HWFN-2444- T
HWFN-3044- T
HWFN-3644- T
HWFN-4244- T
HWFN-4844- T
HWFN-1250- T
HWFN-1850- T
HWFN-2450- T
HWFN-3050- T
HWFN-3650- T
HWFN-4250- T
HWFN-4850- T
HWFN-1256- T
HWFN-1856- T
HWFN-2456- T
HWFN-3056- T
HWFN-3656- T
HWFN-4256- T
HWFN-4856- T
HWFN-1264- T
HWFN-1864- T
HWFN-2464- T
HWFN-3064- T
HWFN-3664- T
HWFN-4264- T
HWFN-4864- T
HWFN-1268- T
HWFN-1868- T
HWFN-2468- T
HWFN-3068- T
HWFN-3668- T
HWFN-4268- T
HWFN-4868- T
HWFN-1282- T
HWFN-1882- T
HWFN-2482- T
HWFN-3082- T
HWFN-3682- T
HWFN-4282- T
HWFN-4882- T
$ 646
719
782
904
963
1067
1132
$ 676
758
830
938
1018
1123
1196
$ 710
800
868
973
1036
1139
1211
$ 743
840
903
1010
1088
1193
1276
$ 749
858
911
1025
1111
1217
1403
$ 796
914
946
1079
1191
1298
1370
$ 849
975
1019
1153
1276
1387
1468
$ 967
1166
1259
1425
1587
1725
1831
$ 717
790
853
975
1053
1157
1222
$ 747
829
901
1009
1108
1213
1286
$ 781
871
939
1044
1126
1229
1301
$ 814
911
974
1081
1178
1283
1366
$ 824
933
986
1100
1209
1315
1501
$ 875
993
1025
1158
1297
1404
1476
$ 928
1054
1098
1232
1382
1493
1574
$1046
1245
1338
1504
1693
1831
1937
$ 724
797
860
982
1059
1163
1228
$ 754
836
908
1016
1114
1219
1292
$ 788
878
946
1051
1132
1235
1307
$ 821
918
981
1088
1183
1288
1371
$ 832
941
994
1108
1219
1325
1511
$ 880
998
1030
1163
1306
1420
1492
$ 933
1059
1103
1237
1405
1516
1597
$1051
1250
1343
1509
1742
1880
1986
$ 729
802
865
987
1065
1169
1234
$ 759
841
913
1021
1120
1225
1298
$ 793
883
951
1056
1145
1248
1320
$ 826
923
986
1093
1197
1318
1401
$ 840
949
1002
1116
1230
1357
1543
$ 885
1003
1035
1168
1316
1457
1529
$ 938
1064
1108
1242
1445
1556
1637
$1056
1255
1361
1527
1791
1929
2035
$ 734
807
870
992
1070
1174
1239
$ 764
846
918
1026
1132
1237
1310
$ 798
888
956
1061
1171
1274
1346
$ 831
928
991
1098
1223
1347
1430
$ 844
956
1009
1123
1258
1391
1577
$ 891
1009
1046
1179
1345
1496
1568
$ 944
1070
1124
1258
1487
1598
1679
$1062
1261
1386
1552
1841
1979
2085
$ 664
737
800
922
988
1092
1157
$ 694
776
848
956
1043
1148
1221
$ 728
818
886
991
1061
1164
1236
$ 761
858
921
1028
1113
1218
1301
$ 768
877
930
1044
1137
1243
1429
$ 816
934
966
1099
1218
1325
1397
$ 869
995
1039
1173
1303
1414
1495
$ 987
1186
1279
1445
1614
1752
1858
Product marked with this symbol available as GSA open market.
86
April 2008 / USA
Class DA – GSA: Open Market
Canadian Conversion Factor: Refer to haworth.com/Canada
$ 693
766
829
951
1025
1129
1194
$ 723
805
877
985
1080
1185
1258
$ 757
847
915
1020
1098
1201
1273
$ 790
887
950
1057
1150
1255
1338
$ 798
907
960
1074
1175
1281
1467
$ 847
965
997
1130
1257
1364
1436
$ 900
1026
1070
1204
1342
1453
1534
$1018
1217
1310
1476
1653
1791
1897
UniGroup Too Price List
This page intentionally blank
April 2008 / USA
87
UniGroup Too Price List
Monolithic Fabric Panel with Low Profile Wood Top Cap
PLACES
Fabric
HFN-T (Non Powered)
C
R
HFP-T (3-Circuit
Powered)
HFP-T6 (6-Circuit
Powered)
Features
Specification Tips
• Includes non-powered or powered panel assembly,
low profile top cap with aligner, with or without
one-piece base raceway cover, 1.6 hinge kits, side
trim rails, leveling glides and carpet gripper; power
distribution assembly/flex connector(s) when power is
specified. .6 base raceway end caps are shipped with
each panel. Order additional as necessary.
• Acoustical panel surfaces.
• Panel surfaces may have the same fabric on both
sides or a different fabric on each side.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
• Wood top cap panels require finish posts,
including end conditions and variable height
conditions.
• For mixed fabric surfaces, price at higher fabric
grade.
• Panels will accept add-on panels up to a
combined height of 82″(2083mm). For aesthetic
consistency, specify PLACES add-on panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
To Order, Specify:
1) Product number.
2) Fabric/colorway for panel side one.
3) Fabric/colorway for panel side two.
US
4) Trim color for raceway cover, glide housings,
end caps and side trim rails.
NOTE:
5) Wood finish color for top cap.
This panel has fabric/colorway
restrictions, see systems fabrics/
color legend.
Non-Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Non-Powered (Example: HFN-4864-T) product numbers and list prices shown on opposite page:
Panel Width
Non-Powered without
Base Raceway Cover
(Example: HFN-4864-TE)
3-Circuit Powered
(Example: HFP-4864-T)
6-Circuit Powered
(Example: HFP-4864-T6)
or
or
NYC 3-Circuit Powered
(Example: HFP-4864-TY)
3-Circuit Powered without
Base Raceway Cover
(Example: HFP-4864-TE)
6-Circuit Powered without
Base Raceway Cover
(Example: HFP-4864-T6E)
or
or
NYC 6-Circuit Powered
(Example: HFP-4864-T6Y)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: HFP-4864-TYE)
NYC 6-Circuit Powered
without Base Raceway Cover
(Example: HFP-4864-T6YE)
Add:
Deduct:
Add:
Add:
Add:
12′′(305mm)
-$26
$155*
n/a
n/a
n/a
18′′(457mm)
-36
155
n/a
$107
n/a
24′′(610mm)
-44
155
$276
99
$220
30′′(762mm)
-46
155
276
96
217
36′′(914mm)
-50
155
276
87
208
42′′(1067mm)
-57
155
276
81
202
48′′(1219mm)
-60
155
276
75
196
54′′(1372mm)
-63
155
276
69
190
60′′(1524mm)
-69
155
276
63
184
*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Non-powered panels ship without receptacle ports in the base raceway cover.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
• For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power
Logic.
• For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.
88
April 2008 / USA
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Monolithic Fabric Panel with Low Profile Wood Top Cap
PLACES
Actual
Height
Fabric
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Non-Powered
Number
Fabric Grade
A
B
C
D
E
F
G
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′((1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HFN-1230- T
HFN-1830- T
HFN-2430- T
HFN-3030- T
HFN-3630- T
HFN-4230- T
HFN-4830- T
HFN-5430- T
HFN-6030- T
HFN-1237- T
HFN-1837- T
HFN-2437- T
HFN-3037- T
HFN-3637- T
HFN-4237- T
HFN-4837- T
HFN-5437- T
HFN-6037- T
HFN-1244- T
HFN-1844- T
HFN-2444- T
HFN-3044- T
HFN-3644- T
HFN-4244- T
HFN-4844- T
HFN-5444- T
HFN-6044- T
HFN-1250- T
HFN-1850- T
HFN-2450- T
HFN-3050- T
HFN-3650- T
HFN-4250- T
HFN-4850- T
HFN-5450- T
HFN-6050- T
HFN-1256- T
HFN-1856- T
HFN-2456- T
HFN-3056- T
HFN-3656- T
HFN-4256- T
HFN-4856- T
HFN-5456- T
HFN-6056- T
HFN-1264- T
HFN-1864- T
HFN-2464- T
HFN-3064- T
HFN-3664- T
HFN-4264- T
HFN-4864- T
HFN-5464- T
HFN-6064- T
HFN-1268- T
HFN-1868- T
HFN-2468- T
HFN-3068- T
HFN-3668- T
HFN-4268- T
HFN-4868- T
HFN-5468- T
HFN-6068- T
HFN-1282- T
HFN-1882- T
HFN-2482- T
HFN-3082- T
HFN-3682- T
HFN-4282- T
HFN-4882- T
HFN-5482- T
HFN-6082- T
$ 527
581
633
730
772
850
902
965
1026
$ 551
612
667
756
813
892
949
1007
1074
$ 577
644
693
780
817
898
954
1014
1083
$ 599
673
717
801
855
935
995
1065
1144
$ 616
700
729
823
890
971
1029
1108
1194
$ 636
728
741
843
926
1004
1061
1150
1240
$ 678
772
796
902
991
1076
1134
1220
1319
$ 771
934
997
1131
1253
1361
1435
1516
1605
$ 615
669
721
818
884
962
1014
1077
1138
$ 639
700
755
844
925
1004
1061
1119
1186
$ 665
732
781
868
929
1010
1066
1126
1195
$ 687
761
805
889
967
1047
1107
1177
1256
$ 708
792
821
915
1008
1089
1147
1226
1312
$ 732
824
837
939
1048
1126
1183
1272
1362
$ 774
868
892
998
1113
1198
1256
1342
1441
$ 867
1030
1093
1227
1375
1483
1557
1638
1727
$ 659
713
765
862
938
1016
1068
1131
1192
$ 683
744
799
888
979
1058
1115
1173
1240
$ 709
776
825
912
983
1064
1120
1180
1249
$ 731
805
849
933
1021
1101
1161
1231
1310
$ 754
838
867
961
1070
1151
1209
1288
1374
$ 780
872
885
987
1120
1198
1255
1344
1434
$ 822
916
940
1046
1185
1270
1328
1414
1513
$ 915
1078
1141
1275
1447
1555
1629
1710
1799
$ 669
723
775
872
948
1026
1078
1141
1202
$ 693
754
809
898
989
1068
1125
1183
1250
$ 719
786
835
922
985
1066
1122
1182
1251
$ 741
815
859
943
1045
1125
1185
1255
1334
$ 766
850
879
973
1104
1185
1243
1322
1408
$ 794
886
899
1001
1172
1250
1307
1396
1486
$ 836
930
954
1060
1249
1334
1392
1478
1577
$ 929
1092
1155
1289
1565
1673
1747
1828
1917
$ 683
737
789
886
958
1036
1088
1151
1212
$ 707
768
823
912
999
1078
1135
1193
1260
$ 733
800
849
936
1035
1116
1172
1232
1301
$ 755
829
873
957
1105
1185
1245
1315
1394
$ 778
862
891
985
1170
1251
1309
1388
1474
$ 804
896
909
1011
1244
1322
1379
1468
1558
$ 846
940
964
1070
1329
1414
1472
1558
1657
$ 939
1102
1203
1337
1661
1769
1843
1924
2013
$ 693
747
799
896
972
1050
1102
1165
1226
$ 717
778
833
922
1041
1120
1177
1235
1302
$ 743
810
859
946
1087
1168
1224
1284
1353
$ 765
839
883
967
1165
1245
1305
1375
1454
$ 790
874
903
997
1238
1319
1377
1456
1542
$ 814
906
941
1043
1322
1400
1457
1546
1636
$ 856
950
996
1102
1413
1498
1556
1642
1741
$ 949
1112
1245
1385
1763
1871
1945
2026
2115
$ 561
615
667
764
818
896
948
1011
1072
$ 585
646
701
790
859
938
995
1053
1120
$ 611
678
727
814
863
944
1000
1060
1129
$ 633
707
751
835
901
981
1041
1111
1190
$ 652
736
765
859
938
1019
1077
1156
1242
$ 674
766
779
881
976
1054
1111
1200
1290
$ 716
810
834
940
1041
1126
1184
1270
1369
$ 809
972
1035
1169
1303
1411
1485
1566
1655
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
89
UniGroup Too Price List
Basic Monolithic Fabric Panel with Low Profile Wood Top Cap
PLACES
Fabric
HMN-T (Non Powered)
C
R
HMP-T (3-Circuit
Powered)
HMP-T6 (6-Circuit
Powered)
Features
Specification Tips
• Includes non-powered or powered panel assembly,
low profile top cap with aligner, with or without
one-piece base raceway cover, 1.6 hinge kits, side
trim rails, leveling glides and carpet gripper; power
distribution assembly/flex connector(s) when power is
specified. .6 base raceway end caps are shipped with
each panel. Order additional as necessary.
• Acoustical panel surfaces.
• Panel surfaces may have the same fabric on both
sides or a different fabric on each side.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
• Wood top cap panels require finish posts,
including end conditions and variable height
conditions.
• For mixed fabric surfaces, price at higher fabric
grade.
• Panels will accept add-on panels up to a
combined height of 82″(2083mm). For aesthetic
consistency, specify PLACES add-on panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
To Order, Specify:
1) Product number.
2) Fabric/colorway for panel side one.
3) Fabric/colorway for panel side two.
US
4) Trim color for raceway cover, glide housings,
end caps and side trim rails.
NOTE:
5) Wood finish color for top cap.
This panel has fabric/colorway
restrictions, see systems fabrics/
color legend.
Non-Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Non-Powered (Example: HMN-4864-T) product numbers and list prices shown on opposite page:
Panel Width
Non-Powered without
Base Raceway Cover
(Example: HMN-4864-TE)
3-Circuit Powered
(Example: HMP-4864-T)
6-Circuit Powered
(Example: HMP-4864-T6)
or
or
NYC 3-Circuit Powered
(Example: HMP-4864-TY)
3-Circuit Powered without
Base Raceway Cover
(Example: HMP-4864-TE)
6-Circuit Powered without
Base Raceway Cover
(Example: HMP-4864-T6E)
or
or
NYC 6-Circuit Powered
(Example: HMP-4864-T6Y)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: HMP-4864-TYE)
NYC 6-Circuit Powered
without Base Raceway Cover
(Example: E2MP-462-TYE)
Add:
Deduct:
Add:
Add:
Add:
12′′(305mm)
-$26
$155*
n/a
n/a
n/a
18′′(457mm)
-36
155
n/a
$107
n/a
24′′(610mm)
-44
155
$276
99
$220
30′′(762mm)
-46
155
276
96
217
36′′(914mm)
-50
155
276
87
208
42′′(1067mm)
-57
155
276
81
202
48′′(1219mm)
-60
155
276
75
196
54′′(1372mm)
-63
155
276
69
190
60′′(1524mm)
-69
155
276
63
184
*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Non-powered panels ship without receptacle ports in the base raceway cover.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
• For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power
Logic.
• For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.
90
April 2008 / USA
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Basic Monolithic Fabric Panel with Low Profile Wood Top Cap
PLACES
Actual
Height
Fabric
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Non-Powered
Number
Fabric Grade
A
B
C
D
E
F
G
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′((1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HMN-1230- T
HMN-1830- T
HMN-2430- T
HMN-3030- T
HMN-3630- T
HMN-4230- T
HMN-4830- T
HMN-5430- T
HMN-6030- T
HMN-1237- T
HMN-1837- T
HMN-2437- T
HMN-3037- T
HMN-3637- T
HMN-4237- T
HMN-4837- T
HMN-5437- T
HMN-6037- T
HMN-1244- T
HMN-1844- T
HMN-2444- T
HMN-3044- T
HMN-3644- T
HMN-4244- T
HMN-4844- T
HMN-5444- T
HMN-6044- T
HMN-1250- T
HMN-1850- T
HMN-2450- T
HMN-3050- T
HMN-3650- T
HMN-4250- T
HMN-4850- T
HMN-5450- T
HMN-6050- T
HMN-1256- T
HMN-1856- T
HMN-2456- T
HMN-3056- T
HMN-3656- T
HMN-4256- T
HMN-4856- T
HMN-5456- T
HMN-6056- T
HMN-1264- T
HMN-1864- T
HMN-2464- T
HMN-3064- T
HMN-3664- T
HMN-4264- T
HMN-4864- T
HMN-5464- T
HMN-6064- T
HMN-1268- T
HMN-1868- T
HMN-2468- T
HMN-3068- T
HMN-3668- T
HMN-4268- T
HMN-4868- T
HMN-5468- T
HMN-6068- T
HMN-1282- T
HMN-1882- T
HMN-2482- T
HMN-3082- T
HMN-3682- T
HMN-4282- T
HMN-4882- T
HMN-5482- T
HMN-6082- T
$ 438
484
528
610
641
708
752
803
852
$ 460
510
557
627
673
743
790
839
894
$ 481
536
578
650
681
746
794
844
899
$ 497
564
601
667
709
778
829
887
954
$ 513
585
609
685
740
807
855
920
993
$ 528
606
617
701
771
835
884
955
1032
$ 566
644
663
750
824
897
944
1017
1100
$ 644
782
832
942
1044
1133
1200
1264
1339
$ 526
572
616
698
753
820
864
915
964
$ 548
598
645
715
785
855
902
951
1006
$ 569
624
666
738
793
858
906
956
1011
$ 585
652
689
755
821
890
941
999
1066
$ 605
677
701
777
858
925
973
1038
1111
$ 624
702
713
797
893
957
1006
1077
1154
$ 662
740
759
846
946
1019
1066
1139
1222
$ 740
878
928
1038
1166
1255
1322
1386
1461
$ 570
616
660
742
807
874
918
969
1018
$ 592
642
689
759
839
909
956
1005
1060
$ 613
668
710
782
847
912
960
1010
1065
$ 629
696
733
799
875
944
995
1053
1120
$ 651
723
747
823
920
987
1035
1100
1173
$ 672
750
761
845
965
1029
1078
1149
1226
$ 710
788
807
894
1018
1091
1138
1211
1294
$ 788
926
976
1086
1238
1327
1394
1458
1533
$ 580
626
670
746
817
884
928
979
1028
$ 602
652
699
769
849
919
966
1015
$1070
623
678
720
792
865
930
978
1028
1083
$ 639
706
743
809
899
968
1019
1077
1144
$ 663
735
759
835
952
1019
1067
1132
1205
$ 686
764
775
859
1015
1079
1128
1199
1276
$ 724
802
821
908
1082
1155
1202
1275
1358
$ 802
940
988
1098
1356
1445
1512
1576
1651
$ 594
640
684
766
827
894
938
989
1038
$ 616
666
713
783
859
929
976
1025
$1080
637
692
734
806
899
964
1012
1062
1117
$ 653
720
757
823
957
1026
1077
1135
1202
$ 675
747
771
847
1020
1087
1135
1200
1273
$ 696
774
785
869
1089
1153
1202
1273
1350
$ 734
812
831
918
1162
1235
1282
1355
1438
$ 812
950
1036
1146
1452
1541
1608
1672
1747
$ 604
650
694
776
841
908
952
1003
1052
$ 626
676
723
793
901
971
1018
1067
$1122
647
702
744
816
951
1016
1064
1114
1169
$ 663
730
767
833
1019
1088
1139
1197
1264
$ 687
759
783
859
1086
1153
1201
1266
1339
$ 706
784
817
901
1167
1231
1280
1351
1428
$ 744
822
863
950
1246
1319
1366
1439
1522
$ 822
960
1086
1196
1552
1641
1708
1772
1847
$ 472
518
562
644
687
754
798
849
898
$ 494
544
591
661
719
789
836
885
940
$ 515
570
612
684
727
792
840
890
945
$ 531
598
635
701
755
824
875
933
1000
$ 549
621
645
721
788
855
903
968
1041
$ 566
644
655
739
821
885
934
1005
1082
$ 604
682
701
788
874
947
994
1067
1150
$ 682
820
870
980
1094
1183
1250
1314
1389
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
91
UniGroup Too Price List
Ported Monolithic Fabric Panel with Low Profile Wood Top Cap
PLACES
Fabric Ported —
One Port Right or Left
HFP-RT
(3-Circuit Powered —
Right Port)
C
R
HFP-LT
(3-Circuit Powered—
Left Port)
US
NOTE:
This panel has fabric/colorway
restrictions, see systems fabrics/
color legend.
Features
Specification Tips
• Includes powered panel assembly, low profile top cap
with aligner, with or without one-piece base raceway
cover, 1.6 hinge kits, side trim rails, leveling glides
and carpet gripper; power distribution assembly/flex
connector(s). .6 base raceway end caps are shipped
with each panel. Order additional as necessary.
• Acoustical panel surfaces.
• Panel surfaces may have the same fabric on both
sides or a different fabric on each side.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
• Concealed 2′′(51mm) deep top raceway to store and
route communication cables.
• Cables are routed downward to ported opening above
worksurface through internal, vertical panel frame rail.
• Ported panels are only available as 3-circuit powered
(both port location and base). Chicago and New York
applications require modification of product number,
see below.
• Factory installed electrical power is routed upward to
the ported openings from the base raceway.
• A metal barrier, located inside the ported opening,
shields electrical wires from communication cables.
• Port option may be limited in New York City,
consult your local code authority prior to
specifying.
• Wood top cap panels require finish posts,
including end conditions and variable height
conditions.
• For mixed fabric surfaces, price at higher fabric
grade.
• Panels will accept add-on panels up to a
combined height of 82″(2083mm). For aesthetic
consistency, specify PLACES add-on panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
• When specifying two (2) colors, specify
finish/color for the side with the port first. Then
specify finish/color for the other side.
• Ported panels require separate specification
of port cover plates, see Specification Guide.
To Order, Specify:
1) Product number, including:
1 Port Specification:
R Right-hand
L
Left-hand
2) Fabric/colorway for panel side one (port side).
3) Fabric/colorway for panel side two.
4) Trim color for raceway cover, glide housings,
end caps and side trim rails.
5) Wood finish color for top cap.
Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Powered (Example: HFP-4864-RT) product numbers and list prices shown on opposite page:
3-Circuit Powered without
Base Raceway Cover
(Example: HFP-4864-RTE)
or
Panel Width
NYC 3-Circuit Powered
(Example: HFP-4864-RTY)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: HFP-4864-RTYE)
Chicago Powered
(Example: HFP-4864-RTC)
Add:
Deduct:
Deduct:
36′′(914mm)
—
-$68
-$155
42′′(1067mm)
—
-74
-155
48′′(1219mm)
—
-80
-155
54′′(1372mm)
—
-86
-155
60′′(1524mm)
—
-92
-155
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
92
April 2008 / USA
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Ported Monolithic Fabric Panel with Low Profile Wood Top Cap
PLACES
Actual
Height
Fabric Ported —
One Port Right or Left
50′′(1270mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Powered
Number 1
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HFP-3650HFP-4250HFP-4850HFP-5450HFP-6050HFP-3664HFP-4264HFP-4864HFP-5464HFP-6064HFP-3668HFP-4268HFP-4868HFP-5468HFP-6068HFP-3682HFP-4282HFP-4882HFP-5482HFP-6082-
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
Fabric Grade
A
B
C
D
E
F
G
$1277
1357
1417
1487
1566
$1348
1426
1483
1572
1662
$1413
1498
1556
1642
1741
$1675
1783
1857
1938
2027
$1389
1469
1529
1599
1678
$1470
1548
1605
1694
1784
$1535
1620
1678
1764
1863
$1797
1905
1979
2060
2149
$1443
1523
1583
1653
1732
$1542
1620
1677
1766
1856
$1607
1692
1750
1836
1935
$1869
1977
2051
2132
2221
$1467
1547
1607
1677
1756
$1594
1672
1729
1818
1908
$1671
1756
1814
1900
1999
$1987
2095
2169
2250
2339
$1527
1607
1667
1737
1816
$1666
1744
1801
1890
1980
$1751
1836
1894
1980
2079
$2083
2191
2265
2346
2435
$1587
1667
1727
1797
1876
$1744
1822
1879
1968
2058
$1835
1920
1978
2064
2163
$2185
2293
2367
2646
2537
$1323
1403
1463
1533
1612
$1398
1476
1533
1622
1712
$1463
1548
1606
1692
1791
$1725
1833
1907
1988
2077
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
93
UniGroup Too Price List
Ported Monolithic Fabric Panel with Low Profile Wood Top Cap
PLACES
Fabric Ported —
One Port Each Side
HFP-1T (3-Circuit Powered)
C
R
US
NOTES:
Ports are back-to-back
onthis panel.
This panel has fabric/colorway
restrictions, see systems fabrics/
color legend.
Features
Specification Tips
• Includes non-powered or powered panel assembly,
low profile top cap with aligner, with or without
one-piece base raceway cover, 1.6 hinge kits, side
trim rails, leveling glides and carpet gripper; power
distribution assembly/flex connector(s). .6 base
raceway end caps are shipped with each panel. Order
additional as necessary.
• Acoustical panel surfaces.
• Panel surfaces may have the same fabric on both
sides or a different fabric on each side.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
• Concealed 2′′(51mm) deep top raceway to store and
route communication cables.
• Cables are routed downward to ported opening above
worksurface through internal, vertical panel frame rail.
• Ported panels are only available as 3-circuit powered
(both port location and base). Chicago and New York
applications require modification of product number,
see below.
• Factory installed electrical power is routed upward to
the ported openings from the base raceway.
• A metal barrier, located inside the ported opening,
shields electrical wires from communication cables.
• Port option may be limited in New York City,
consult your local code authority prior to
specifying.
• Wood top cap panels require finish posts,
including end conditions and variable height
conditions.
• For mixed fabric surfaces, price at higher fabric
grade.
• Panels will accept add-on panels up to a
combined height of 82″(2083mm). For aesthetic
consistency, specify PLACES add-on panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
• When specifying two (2) colors, specify
finish/color for the side with the port in the
right-hand position first. Then specify finish/color
for the other side.
• Ported panels require separate specification
of port cover plates, see Specification Guide.
To Order, Specify:
1) Product number.
2) Fabric/colorway for panel side one
(right-hand port side).
3) Fabric/colorway for panel side two.
4) Trim color for raceway cover, glide housings,
end caps and side trim rails.
5) Wood finish color for top cap.
Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Powered (Example: HFP-4864-1T) product numbers and list prices shown on opposite page:
3-Circuit Powered without
Base Raceway Cover
(Example: HFP-4864-1TE)
or
Panel Width
NYC 3-Circuit Powered
(Example: HFP-4864-1TY)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: HFP-4864-1TYE)
Chicago Powered
(Example: HFP-4864-1TC)
Add:
Deduct:
Deduct:
36′′(914mm)
—
-$68
-$155
42′′(1067mm)
—
-74
-155
48′′(1219mm)
—
-80
-155
54′′(1372mm)
—
-86
-155
60′′(1524mm)
—
-92
-155
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
94
April 2008 / USA
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Ported Monolithic Fabric Panel with Low Profile Wood Top Cap
PLACES
Actual
Height
Fabric Ported —
One Ported Each Side
50′′(1270mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Powered
Number
Fabric Grade
A
B
C
D
E
F
G
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HFP-3650-1 T
HFP-4250-1 T
HFP-4850-1 T
HFP-5450-1 T
HFP-6050-1 T
HFP-3664-1 T
HFP-4264-1 T
HFP-4864-1 T
HFP-5464-1 T
HFP-6064-1 T
HFP-3668-1 T
HFP-4268-1 T
HFP-4868-1 T
HFP-5468-1 T
HFP-6068-1 T
HFP-3682-1 T
HFP-4282-1 T
HFP-4882-1 T
HFP-5482-1 T
HFP-6082-1 T
$1320
1400
1460
1530
1609
$1391
1469
1526
1615
1705
$1456
1541
1599
1685
1784
$1718
1826
1900
1981
2070
$1432
1512
1572
1642
1721
$1513
1591
1648
1737
1827
$1578
1663
1721
1807
1906
$1840
1948
2022
2103
2192
$1486
1566
1626
1696
1775
$1585
1663
1720
1809
1899
$1650
1735
1793
1879
1978
$1912
2020
2094
2175
2264
$1510
1590
1650
1720
1799
$1637
1715
1772
1861
1951
$1714
1799
1857
1943
2042
$2030
2138
2212
2293
2382
$1570
1650
1710
1780
1859
$1709
1787
1844
1933
2023
$1794
1879
1937
2023
2122
$2126
2234
2308
2389
2478
$1630
1710
1770
1840
1919
$1787
1865
1922
2011
2101
$1878
1963
2021
2107
2206
$2228
2336
2410
2689
2580
$1366
1446
1506
1576
1655
$1441
1519
1576
1665
1755
$1506
1591
1649
1735
1834
$1768
1876
1950
2031
2120
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
95
UniGroup Too Price List
Ported Monolithic Fabric Panel with Low Profile Wood Top Cap
PLACES
Fabric Ported —
Two Ports, Same Side
HFP-2T (3-Circuit Powered)
C
R
US
NOTE:
This panel has fabric/colorway
restrictions, see systems fabrics/
color legend.
Features
Specification Tips
• Includes non-powered or powered panel assembly,
low profile top cap with aligner, with or without
one-piece base raceway cover, 1.6 hinge kits, side
trim rails, leveling glides and carpet gripper; power
distribution assembly/flex connector(s). .6 base
raceway end caps are shipped with each panel. Order
additional as necessary.
• Acoustical panel surfaces.
• Panel surfaces may have the same fabric on both
sides or a different fabric on each side.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
• Concealed 2′′(51mm) deep top raceway to store and
route communication cables.
• Cables are routed downward to ported opening above
worksurface through internal, vertical panel frame rail.
• Ported panels are only available as 3-circuit powered
(both port location and base). Chicago and New York
applications require modification of product number,
see below.
• Factory installed electrical power is routed upward to
the ported openings from the base raceway.
• A metal barrier, located inside the ported opening,
shields electrical wires from communication cables.
• Port option may be limited in New York City,
consult your local code authority prior to
specifying.
• Wood top cap panels require finish posts,
including end conditions and variable height
conditions.
• For mixed fabric surfaces, price at higher fabric
grade.
• Panels will accept add-on panels up to a
combined height of 82″(2083mm). For aesthetic
consistency, specify PLACES add-on panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
• When specifying two (2) colors, specify
finish/color for the side with the ports first. Then
specify finish/color for the other side.
• Ported panels require separate specification
of port cover plates, see Specification Guide.
To Order, Specify:
1) Product number.
2) Fabric/colorway for panel side one
(ported side).
3) Fabric/colorway for panel side two.
4) Trim color for raceway cover, glide housings,
end caps and side trim rails.
5) Wood finish color for top cap.
Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Powered (Example: HFP-4864-2T) product numbers and list prices shown on opposite page:
3-Circuit Powered without
Base Raceway Cover
(Example: HFP-4864-2TE)
or
Panel Width
NYC 3-Circuit Powered
(Example: HFP-4864-2TY)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: HFP-4864-2TYE)
Chicago Powered
(Example: HFP-4864-2TC)
Add:
Deduct:
Deduct:
36′′(914mm)
—
-$68
-$155
42′′(1067mm)
—
-74
-155
48′′(1219mm)
—
-80
-155
54′′(1372mm)
—
-86
-155
60′′(1524mm)
—
-92
-155
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
96
April 2008 / USA
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Ported Monolithic Fabric Panel with Low Profile Wood Top Cap
PLACES
Actual
Height
Fabric Ported —
Two Ports, Same Side
50′′(1270mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Powered
Number
Fabric Grade
A
B
C
D
E
F
G
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HFP-3650-2 T
HFP-4250-2 T
HFP-4850-2 T
HFP-5450-2 T
HFP-6050-2 T
HFP-3664-2 T
HFP-4264-2 T
HFP-4864-2 T
HFP-5464-2 T
HFP-6064-2 T
HFP-3668-2 T
HFP-4268-2 T
HFP-4868-2 T
HFP-5468-2 T
HFP-6068-2 T
HFP-3682-2 T
HFP-4282-2 T
HFP-4882-2 T
HFP-5482-2 T
HFP-6082-2 T
$1337
1417
1477
1547
1626
$1408
1486
1543
1632
1722
$1473
1558
1616
1702
1801
$1735
1843
1917
1998
2087
$1449
1529
1589
1659
1738
$1530
1608
1665
1754
1844
$1595
1680
1738
1824
1923
$1857
1965
2039
2120
2209
$1503
1583
1643
1713
1792
$1602
1680
1737
1826
1916
$1667
1752
1810
1896
1995
$1929
2037
2111
2192
2281
$1527
1607
1667
1737
1816
$1654
1732
1789
1878
1968
$1731
1816
1874
1960
2059
$2047
2155
2229
2310
2399
$1587
1667
1727
1797
1876
$1726
1804
1861
1950
2040
$1811
1896
1954
2040
2139
$2143
2251
2325
2406
2495
$1647
1727
1787
1857
1936
$1804
1882
1939
2028
2118
$1895
1980
2038
2124
2223
$2245
2353
2427
2706
2597
$1383
1463
1523
1593
1672
$1458
1536
1593
1682
1772
$1523
1608
1666
1752
1851
$1785
1893
1967
2048
2137
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
97
UniGroup Too Price List
Ported Monolithic Fabric Panel with Low Profile Wood Top Cap
PLACES
Fabric Ported —
Four Ports, Two Each Side
HFP-4T (3-Circuit Powered)
C
R
US
NOTES:
Ports are back-to-back
onthis panel.
This panel has fabric/colorway
restrictions, see systems fabrics/
color legend.
Features
Specification Tips
• Includes non-powered or powered panel assembly,
low profile top cap with aligner, with or without
one-piece base raceway cover, 1.6 hinge kits, side
trim rails, leveling glides and carpet gripper; power
distribution assembly/flex connector(s). .6 base
raceway end caps are shipped with each panel. Order
additional as necessary.
• Acoustical panel surfaces.
• Panel surfaces may have the same fabric on both
sides or a different fabric on each side.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
• Concealed 2′′(51mm) deep top raceway to store and
route communication cables.
• Cables are routed downward to ported opening above
worksurface through internal, vertical panel frame rail.
• Ported panels are only available as 3-circuit powered
(both port location and base). Chicago and New York
applications require modification of product number,
see below.
• Factory installed electrical power is routed upward to
the ported openings from the base raceway.
• A metal barrier, located inside the ported opening,
shields electrical wires from communication cables.
• Port option may be limited in New York City,
consult your local code authority prior to
specifying.
• Wood top cap panels require finish posts,
including end conditions and variable height
conditions.
• For mixed fabric surfaces, price at higher fabric
grade.
• Panels will accept add-on panels up to a
combined height of 82″(2083mm). For aesthetic
consistency, specify PLACES add-on panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
• Ported panels require separate specification
of port cover plates, see Specification Guide.
To Order, Specify:
1) Product number.
2) Fabric/colorway for panel side one.
3) Fabric/colorway for panel side two.
4) Trim color for raceway cover, glide housings,
end caps and side trim rails.
5) Wood finish color for top cap.
Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Powered (Example: HFP-4864-4T) product numbers and list prices shown on opposite page:
3-Circuit Powered without
Base Raceway Cover
(Example: HFP-4864-4TE)
or
Panel Width
NYC 3-Circuit Powered
(Example: HFP-4864-4TY)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: HFP-4864-4TYE)
Chicago Powered
(Example: HFP-4864-4TC)
Add:
Deduct:
Deduct:
36′′(914mm)
—
-$68
-$155
42′′(1067mm)
—
-74
-155
48′′(1219mm)
—
-80
-155
54′′(1372mm)
—
-86
-155
60′′(1524mm)
—
-92
-155
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
98
April 2008 / USA
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Ported Monolithic Fabric Panel with Low Profile Wood Top Cap
PLACES
Actual
Height
Fabric Ported —
Four Ports, Two Each
Side
50′′(1270mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Powered
Number
Fabric Grade
A
B
C
D
E
F
G
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HFP-3650-4 T
HFP-4250-4 T
HFP-4850-4 T
HFP-5450-4 T
HFP-6050-4 T
HFP-3664-4 T
HFP-4264-4 T
HFP-4864-4 T
HFP-5464-4 T
HFP-6064-4 T
HFP-3668-4 T
HFP-4268-4 T
HFP-4868-4 T
HFP-5468-4 T
HFP-6068-4 T
HFP-3682-4 T
HFP-4282-4 T
HFP-4882-4 T
HFP-5482-4 T
HFP-6082-4 T
$1500
1580
1640
1710
1789
$1571
1649
1706
1795
1885
$1636
1721
1779
1865
1964
$1898
2006
2080
2161
2250
$1612
1692
1752
1822
1901
$1693
1771
1828
1917
2007
$1758
1843
1901
1987
2086
$2020
2128
2202
2283
2372
$1666
1746
1806
1876
1955
$1765
1843
1900
1989
2079
$1830
1915
1973
2059
2158
$2092
2200
2274
2355
2444
$1690
1770
1830
1900
1979
$1817
1895
1952
2041
2131
$1894
1979
2037
2123
2222
$2210
2318
2392
2473
2562
$1750
1830
1890
1960
2039
$1889
1967
2024
2113
2203
$1974
2059
2117
2203
2302
$2306
2414
2488
2569
2658
$1810
1890
1950
2020
2099
$1967
2045
2102
2191
2281
$2058
2143
2201
2287
2386
$2408
2516
2590
2869
2760
$1546
1626
1686
1756
1835
$1621
1699
1756
1845
1935
$1686
1771
1829
1915
2014
$1948
2056
2130
2211
2300
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
99
UniGroup Too Price List
Open Frame Monolithic Panel with Low Profile Wood Top Cap
PLACES
Open Frame
Features
Specification Tips
• Includes non-powered or powered panel assembly,
low profile top cap with aligner, with or without
one-piece base raceway cover, 1.6 hinge kits, side
trim rails, leveling glides and carpet gripper; power
distribution assembly/flex connector(s) when power is
specified. .6 base raceway end caps are shipped with
each panel.Order additional as necessary.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
• Does not accept top feed modules.
• Panels will accept glazed add-on panels up to a
combined height of 82′′(2083mm). For aesthetic
consistency, specify PLACES add-on panels.
• Wood top cap panels require end-of-run finish
posts for end conditions and variable height
conditions.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
To Order, Specify:
1) Product number.
2) Trim color for raceway cover, glide housings,
end caps and side trim rails.
HON-T (Non Powered)
C
R
3) Wood finish color for top cap.
HOP-T (3-Circuit Powered)
HOP-T6 (6-Circuit Powered)
US
Non-Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Non-Powered (Example: HON-4864-T) product numbers and list prices shown on opposite page:
Panel Width
Non-Powered without
Base Raceway Cover
(Example: HON-4864-TE)
3-Circuit Powered without
Base Raceway Cover
(Example: HOP-4864-TE)
6-Circuit Powered without
Base Raceway Cover
(Example: HOP-4864-T6E)
or
or
3-Circuit Powered
(Example: HOP-4864-T)
6-Circuit Powered
(Example: HOP-4864-T6)
or
or
NYC 3-Circuit Powered
(Example: HOP-4864-TY)
NYC 6-Circuit Powered
(Example: HOP-4864-T6Y)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: HOP-4864-TYE)
NYC 6-Circuit Powered
without Base Raceway Cover
(Example: HOP-4864-T6YE)
Add:
Deduct:
Add:
Add:
Add:
12′′(305mm)
-$26
$155*
n/a
n/a
n/a
18′′(457mm)
-36
155
n/a
$107
n/a
24′′(610mm)
-44
155
$276
99
$220
30′′(762mm)
-46
155
276
96
217
36′′(914mm)
-50
155
276
87
208
42′′(1067mm)
-57
155
276
81
202
48′′(1219mm)
-60
155
276
75
196
54′′(1372mm)
-63
155
276
69
190
60′′(1524mm)
-69
155
276
63
184
*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Non-powered panels ship without receptacle ports in the base raceway cover.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
• For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power
Logic.
• For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.
100
April 2008 / USA
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Open Frame Monolithic Panel with Low Profile Wood Top Cap
PLACES
Actual
Height
Open Frame
44′′(1118mm)
50′′(1270mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Non-Powered
Number
Price
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HON-1244- T
HON-1844- T
HON-2444- T
HON-3044- T
HON-3644- T
HON-4244- T
HON-4844- T
HON-5444- T
HON-6044- T
HON-1250- T
HON-1850- T
HON-2450- T
HON-3050- T
HON-3650- T
HON-4250- T
HON-4850- T
HON-5450- T
HON-6050- T
HON-1264- T
HON-1864- T
HON-2464- T
HON-3064- T
HON-3664- T
HON-4264- T
HON-4864- T
HON-5464- T
HON-6064- T
HON-1268- T
HON-1868- T
HON-2468- T
HON-3068- T
HON-3668- T
HON-4268- T
HON-4868- T
HON-5468- T
HON-6068- T
HON-1282- T
HON-1882- T
HON-2482- T
HON-3082- T
HON-3682- T
HON-4282- T
HON-4882- T
HON-5482- T
HON-6082- T
$ 510
558
618
677
736
802
912
989
1068
$ 525
574
633
695
764
840
948
1024
1110
$ 550
598
662
737
819
899
1003
1078
1157
$ 584
642
705
776
871
952
1062
1136
1233
$ 661
723
813
913
1065
1127
1201
1289
1388
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
101
UniGroup Too Price List
Glazed Monolithic Panel with Low Profile Wood Top Cap
PLACES
Glazed
Features
Specification Tips
• Includes non-powered or powered panel assembly,
low profile top cap with aligner, with or without
one-piece base raceway cover, 1.6 hinge kits, side
trim rails, leveling glides and carpet gripper; power
distribution assembly/flex connector(s) when power is
specified. .6 base raceway end caps are shipped with
each panel. Order additional as necessary.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
• Does not accept top feed modules.
• Panels will accept glazed add-on panels up to a
combined height of 82′′(2083mm). For aesthetic
consistency, specify PLACES add-on panels.
• Wood top cap panels require end-of-run finish
posts for end conditions and variable height
conditions.
• Glazed panels accept muntin kits and wainscot
kits.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
To Order, Specify:
1) Product number.
HGN-T (Non Powered)
C
R
HGP-T (3-Circuit Powered)
HGP-T6 (6-Circuit Powered)
2) Glazing finish color.
3) Trim color for raceway cover, glide housings,
end caps and side trim rails.
US
4) Wood finish color for top cap.
Non-Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Non-Powered (Example: HGN-4864-T) product numbers and list prices shown on opposite page:
Panel Width
Non-Powered without
Base Raceway Cover
(Example: HGN-4864-TE)
3-Circuit Powered
(Example: HGP-4864-T)
6-Circuit Powered
(Example: HGP-4864-T6)
or
or
NYC 3-Circuit Powered
(Example: HGP-4864-TY)
3-Circuit Powered without
Base Raceway Cover
(Example: HGP-4864-TE)
6-Circuit Powered without
Base Raceway Cover
(Example: HGP-4864-T6E)
or
or
NYC 6-Circuit Powered
(Example: HGP-4864-T6Y)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: HGP-4864-TYE)
NYC 6-Circuit Powered
without Base Raceway Cover
(Example: HGP-4864-T6YE)
Add:
Deduct:
Add:
Add:
Add:
12′′(305mm)
-$26
$155*
n/a
n/a
n/a
18′′(457mm)
-36
155
n/a
$107
n/a
24′′(610mm)
-44
155
$276
99
$220
30′′(762mm)
-46
155
276
96
217
36′′(914mm)
-50
155
276
87
208
42′′(1067mm)
-57
155
276
81
202
48′′(1219mm)
-60
155
276
75
196
54′′(1372mm)
-63
155
276
69
190
60′′(1524mm)
-69
155
276
63
184
*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Non-powered panels ship without receptacle ports in the base raceway cover.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
• For International Power, specify non-powered panels and use Power Logic components. See specification guide for more information on Power
Logic.
• For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.
102
April 2008 / USA
Class BA – GSA: Open Market
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Glazed Monolithic Panel with Low Profile Wood Top Cap
PLACES
Actual
Height
Glazed
44′′(1118mm)
50′′(1270mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Non-Powered
Number
Clear or
Bronze Price
Frosted Price
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HGN-1244- T
HGN-1844- T
HGN-2444- T
HGN-3044- T
HGN-3644- T
HGN-4244- T
HGN-4844- T
HGN-5444- T
HGN-6044- T
HGN-1250- T
HGN-1850- T
HGN-2450- T
HGN-3050- T
HGN-3650- T
HGN-4250- T
HGN-4850- T
HGN-5450- T
HGN-6050- T
HGN-1264- T
HGN-1864- T
HGN-2464- T
HGN-3064- T
HGN-3664- T
HGN-4264- T
HGN-4864- T
HGN-5464- T
HGN-6064- T
HGN-1268- T
HGN-1868- T
HGN-2468- T
HGN-3068- T
HGN-3668- T
HGN-4268- T
HGN-4868- T
HGN-5468- T
HGN-6068- T
HGN-1282- T
HGN-1882- T
HGN-2482- T
HGN-3082- T
HGN-3682- T
HGN-4282- T
HGN-4882- T
HGN-5482- T
HGN-6082- T
$ 693
780
874
978
1081
1203
1321
1424
1536
$ 712
800
895
1008
1123
1241
1347
1460
1565
$ 729
830
931
1041
1157
1303
1409
1517
1637
$ 777
884
996
1096
1225
1389
1503
1609
1745
$ 888
1048
1204
1325
1468
1651
1780
1903
2049
$ 847
934
1028
1132
1320
1442
1560
1663
1775
$ 866
954
1049
1162
1362
1480
1586
1699
1804
$ 924
1025
1126
1236
1457
1603
1709
1817
1937
$ 972
1079
1191
1291
1525
1689
1803
1909
2045
$1083
1243
1399
1520
1768
1951
2080
2203
2349
Product marked with this symbol available as GSA open market.
Class BA – GSA: Open Market
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
103
UniGroup Too Price List
Single Door and Frame with Low Profile Wood Top Cap
PLACES
Actual
Height
Single Door — Wood
82′′(2083mm)
Width
Door
Swing
Number 1
36′′(914mm)
42′′(1067mm)
Left
Left
HDS-3682HDS-4282-
Wood Finish Group
I
II
LT
LT
$2267
2506
Features
To Order, Specify:
• Includes complete panel assembly [hinge sets, carpet
gripper, door jamb, side rails and trim, hollow core door
(1 5/8′′(41mm) thick), door hinges, hardware, brushed
chrome knobs or ADA lever with lockset and keys, and
threshold].
• Wood veneer surfaces on both sides of door.
• Shipped left-hand swing. Field-adjustable for right-hand
swing.
• 1′′(25mm) deep top communications raceway.
• Threshold will be charcoal trim color.
• No power and communication in base raceway.
1) Product number, including:
$2302
2546
1 Handle Designation:
K Knob
H ADA lever, add $145 list.
2) Wood finish color for door surfaces.
3) Trim color for door frame, raceway cover, glide
housings, end caps and side trim rails.
4) Wood finish color for top cap.
Specification Tips
• Door may be placed a maximum of 24′′(610mm) from
supporting panels at 90В°.
• Will not accept add-on panel.
Door Opening Clearance
HDS-LT
Door Size Height
Width
3682
78 1/2′′(1994mm)
28 1/2′′(724mm)
4282
78 1/2′′(1994mm)
34 1/2′′(876mm)
(Left-hand swing)
104
April 2008 / USA
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
NOTES:
Some building codes may restrict the use of
panel heights greater than 69 ′′(1753mm).
Consult your local code authority to assure
that the furniture layout is compliant prior to
installation.
Most building codes for new buildings require
a minimum clear door width of 32 ′′(813mm).
To meet this requirement, the 42 ′′(1067mm)
door must be ordered.
UniGroup Too Price List
This page intentionally blank
April 2008 / USA
105
UniGroup Too Price List
Monolithic Fabric Panel with Low Profile Steel Top Cap
PLACES
Fabric
Features
Specification Tips
• For mixed fabric surfaces, price at higher fabric
grade.
• Panels will accept add-on panels up to a
combined height of 82″(2083mm). For aesthetic
consistency, specify PLACES add-on panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
• Additional base raceway end caps will need to
be specified if finish post are not ordered.
HFN (Non Powered)
• Includes non-powered or powered panel assembly,
low profile top cap, with or without one-piece base
raceway cover, 1.6 hinge kits, side trim rails, leveling
glides and carpet gripper; power distribution
assembly/flex connector(s) when power is specified.
.6 base raceway end caps are shipped with each
panel. Order additional as necessary.
• Acoustical panel surfaces.
• Panel surfaces may have the same fabric on both
sides or a different fabric on each side.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
C
R
HFP (3-Circuit
Powered)
HFP-6 (6-Circuit
Powered)
To Order, Specify:
1) Product number.
2) Fabric/colorway for panel side one.
3) Fabric/colorway for panel side two.
US
4) Trim color for raceway cover, glide housings
and end caps.
NOTE:
5) Trim color for top cap and side trim rails.
This panel has fabric/colorway
restrictions, see systems fabrics/
color legend.
Non-Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Non-Powered (Example: HFN-4864) product numbers and list prices shown on opposite page:
3-Circuit Powered
without
Base Raceway Cover
(Example: HFP-4864-E)
3-Circuit Powered
(Example: HFP-4864)
Panel Width
Non-Powered without
Base Raceway Cover
(Example: HFN-4864-E)
6-Circuit Powered
(Example: HFP-4864-6)
6-Circuit Powered
without
Base Raceway Cover
(Example: HFP-4864-6E)
or
or
NYC 6-Circuit Powered
without
Base Raceway Cover
(Example: HFP-4864-6YE)
Add:
or
or
NYC 3-Circuit Powered
(Example: HFP-4864-Y)
NYC 6-Circuit Powered
(Example: HFP-4864-6Y)
NYC 3-Circuit Powered
without
Base Raceway Cover
(Example: HFP-4864-YE)
Deduct:
Add:
Add:
Add:
12′′(305mm)
-$26
$155*
n/a
n/a
n/a
18′′(457mm)
-36
155
n/a
$107
n/a
24′′(610mm)
-44
155
$276
99
$220
30′′(762mm)
-46
155
276
96
217
36′′(914mm)
-50
155
276
87
208
42′′(1067mm)
-57
155
276
81
202
48′′(1219mm)
-60
155
276
75
196
54′′(1372mm)
-63
155
276
69
190
60′′(1524mm)
-69
155
276
63
184
*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Non-powered panels ship without receptacle ports in the base raceway cover.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
• For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power
Logic.
• For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.
106
April 2008 / USA
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Monolithic Fabric Panel with Low Profile Steel Top Cap
PLACES
Actual
Height
Fabric
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Non-Powered
Number
Fabric Grade
A
B
C
D
E
F
G
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HFN-1230HFN-1830HFN-2430HFN-3030HFN-3630HFN-4230HFN-4830HFN-5430HFN-6030HFN-1237HFN-1837HFN-2437HFN-3037HFN-3637HFN-4237HFN-4837HFN-5437HFN-6037HFN-1244HFN-1844HFN-2444HFN-3044HFN-3644HFN-4244HFN-4844HFN-5444HFN-6044HFN-1250HFN-1850HFN-2450HFN-3050HFN-3650HFN-4250HFN-4850HFN-5450HFN-6050HFN-1256HFN-1856HFN-2456HFN-3056HFN-3656HFN-4256HFN-4856HFN-5456HFN-6056HFN-1264HFN-1864HFN-2464HFN-3064HFN-3664HFN-4264HFN-4864HFN-5464HFN-6064HFN-1268HFN-1868HFN-2468HFN-3068HFN-3668HFN-4268HFN-4868HFN-5468HFN-6068HFN-1282HFN-1882HFN-2482HFN-3082HFN-3682HFN-4282HFN-4882HFN-5482HFN-6082-
$ 507
557
604
693
727
797
839
900
957
$ 531
588
638
719
768
839
886
942
1005
$ 557
620
664
743
772
845
891
949
1014
$ 579
649
688
764
810
882
932
1000
1075
$ 596
676
700
786
845
918
966
1043
1125
$ 616
704
712
806
881
951
998
1085
1171
$ 658
748
767
865
946
1023
1071
1155
1250
$ 751
910
968
1094
1208
1308
1372
1451
1536
$ 595
645
692
781
839
909
951
1012
1069
$ 619
676
726
807
880
951
998
1054
1117
$ 645
708
752
831
884
957
1003
1061
1126
$ 667
737
776
852
922
994
1044
1112
1187
$ 688
768
792
878
963
1036
1084
1161
1243
$ 712
800
808
902
1003
1073
1120
1207
1293
$ 754
844
863
961
1068
1145
1193
1277
1372
$ 847
1006
1064
1190
1330
1430
1494
1573
1658
$ 639
689
736
825
893
963
1005
1066
1123
$ 663
720
770
851
934
1005
1052
1108
1171
$ 689
752
796
875
938
1011
1057
1115
1180
$ 711
781
820
896
976
1048
1098
1166
1241
$ 734
814
838
924
1025
1098
1146
1223
1305
$ 760
848
856
950
1075
1145
1192
1279
1365
$ 802
892
911
1009
1140
1217
1265
1349
1444
$ 895
1054
1112
1238
1402
1502
1566
1645
1730
$ 649
699
746
835
903
973
1015
1076
1133
$ 673
730
780
861
944
1015
1062
1118
1181
$ 699
762
806
885
940
1013
1059
1117
1182
$ 721
791
830
906
1000
1072
1122
1190
1265
$ 746
826
850
936
1059
1132
1180
1257
1339
$ 774
862
870
964
1127
1197
1244
1331
1417
$ 816
906
925
1023
1204
1281
1329
1413
1508
$ 909
1068
1126
1252
1520
1620
1684
1763
1848
$ 663
713
760
849
913
983
1025
1086
1143
$ 687
744
794
875
954
1025
1072
1128
1191
$ 713
776
820
899
990
1063
1109
1167
1232
$ 735
805
844
920
1060
1132
1182
1250
1325
$ 758
838
862
948
1125
1198
1246
1323
1405
$ 784
872
880
974
1199
1269
1316
1403
1489
$ 826
916
935
1033
1284
1361
1409
1493
1588
$ 919
1078
1174
1300
1616
1716
1780
1859
1944
$ 673
723
770
859
927
997
1039
1100
1157
$ 697
754
804
885
996
1067
1114
1170
1233
$ 723
786
830
909
1042
1115
1161
1219
1284
$ 745
815
854
930
1120
1192
1242
1310
1385
$ 770
850
874
960
1193
1266
1314
1391
1473
$ 794
882
912
1006
1277
1347
1394
1481
1567
$ 836
926
967
1065
1368
1445
1493
1577
1672
$ 929
1088
1216
1348
1718
1818
1882
1961
2046
$ 541
591
638
727
773
843
885
946
1003
$ 565
622
672
753
814
885
932
988
1051
$ 591
654
698
777
818
891
937
995
1060
$ 613
683
722
798
856
928
978
1046
1121
$ 632
712
736
822
893
966
1014
1091
1173
$ 654
742
750
844
931
1001
1048
1135
1221
$ 696
786
805
903
996
1073
1121
1205
1300
$ 789
948
1006
1132
1258
1358
1422
1501
1586
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
107
UniGroup Too Price List
Basic Monolithic Fabric Panel with Low Profile Steel Top Cap
PLACES
Fabric
Features
Specification Tips
• For mixed fabric surfaces, price at higher fabric
grade.
• Panels will accept add-on panels up to a
combined height of 82″(2083mm). For aesthetic
consistency, specify PLACES add-on panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
• Additional base raceway end caps will need to
be specified if finish post are not ordered.
HMN (Non Powered)
• Includes non-powered or powered panel assembly,
low profile top cap, with or without one-piece base
raceway cover, 1.6 hinge kits, side trim rails, leveling
glides and carpet gripper; power distribution
assembly/flex connector(s) when power is specified.
.6 base raceway end caps are shipped with each
panel. Order additional as necessary.
• Acoustical panel surfaces.
• Panel surfaces may have the same fabric on both
sides or a different fabric on each side.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
C
R
HMP (3-Circuit
Powered)
HMP-6 (6-Circuit
Powered)
To Order, Specify:
1) Product number.
2) Fabric/colorway for panel side one.
3) Fabric/colorway for panel side two.
4) Trim color for raceway cover, glide housings
and end caps.
US
5) Trim color for top cap and side trim rails.
NOTE:
This panel has fabric/colorway
restrictions, see systems fabrics/
color legend.
Non-Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Non-Powered (Example: HMN-4864) product numbers and list prices shown on opposite page:
Panel Width
Non-Powered without
Base Raceway Cover
(Example: HMN-4864-E)
3-Circuit Powered
(Example: HMP-4864)
6-Circuit Powered
(Example: HMP-4864-6)
or
or
NYC 3-Circuit Powered
(Example: HMP-4864-Y)
3-Circuit Powered without
Base Raceway Cover
(Example: HMP-4864-E)
6-Circuit Powered without
Base Raceway Cover
(Example: HMP-4864-6E)
or
or
NYC 6-Circuit Powered
(Example: HMP-4864-6Y)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: HMP-4864-YE)
NYC 6-Circuit Powered
without Base Raceway Cover
(Example: HMP-4864-6YE)
Add:
Deduct:
Add:
Add:
Add:
12′′(305mm)
-$26
$155*
n/a
n/a
n/a
18′′(457mm)
-36
155
n/a
$107
n/a
24′′(610mm)
-44
155
$276
99
$220
30′′(762mm)
-46
155
276
96
217
36′′(914mm)
-50
155
276
87
208
42′′(1067mm)
-57
155
276
81
202
48′′(1219mm)
-60
155
276
75
196
54′′(1372mm)
-63
155
276
69
190
60′′(1524mm)
-69
155
276
63
184
*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Non-powered panels ship without receptacle ports in the base raceway cover.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
• For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power
Logic.
• For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.
108
April 2008 / USA
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Basic Monolithic Fabric Panel with Low Profile Steel Top Cap
PLACES
Actual
Height
Fabric Surface — Low
Profile Steel Top Cap
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Non-Powered
Number
Fabric Grade
A
B
C
D
E
F
G
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HMN-1230HMN-1830HMN-2430HMN-3030HMN-3630HMN-4230HMN-4830HMN-5430HMN-6030HMN-1237HMN-1837HMN-2437HMN-3037HMN-3637HMN-4237HMN-4837HMN-5437HMN-6037HMN-1244HMN-1844HMN-2444HMN-3044HMN-3644HMN-4244HMN-4844HMN-5444HMN-6044HMN-1250HMN-1850HMN-2450HMN-3050HMN-3650HMN-4250HMN-4850HMN-5450HMN-6050HMN-1256HMN-1856HMN-2456HMN-3056HMN-3656HMN-4256HMN-4856HMN-5456HMN-6056HMN-1264HMN-1864HMN-2464HMN-3064HMN-3664HMN-4264HMN-4864HMN-5464HMN-6064HMN-1268HMN-1868HMN-2468HMN-3068HMN-3668HMN-4268HMN-4868HMN-5468HMN-6068HMN-1282HMN-1882HMN-2482HMN-3082HMN-3682HMN-4282HMN-4882HMN-5482HMN-6082-
$ 420
463
502
580
603
664
699
749
795
$ 442
489
531
597
635
699
737
785
837
$ 463
515
552
620
643
702
741
790
842
$ 479
543
575
637
671
734
776
833
897
$ 495
564
583
655
702
763
802
866
936
$ 510
585
591
671
733
791
831
901
975
$ 548
623
637
720
786
853
891
963
1043
$ 626
761
806
912
1006
1089
1147
1210
1282
$ 508
551
590
668
715
776
811
861
907
$ 530
577
619
685
747
811
849
897
949
$ 551
603
640
708
755
814
853
902
954
$ 567
631
663
725
783
846
888
945
1009
$ 587
656
675
747
820
881
920
984
1054
$ 606
681
687
767
855
913
953
1023
1097
$ 644
719
733
816
908
975
1013
1085
1165
$ 722
857
902
1008
1128
1211
1269
1332
1404
$ 552
595
634
712
769
830
865
915
961
$ 574
621
663
729
801
865
903
951
1003
$ 595
647
684
752
809
868
907
956
1008
$ 611
675
707
769
837
900
942
999
1063
$ 633
702
721
793
882
943
982
1046
1116
$ 654
729
735
815
927
985
1025
1095
1169
$ 692
767
781
864
980
1047
1085
1157
1237
$ 770
905
950
1056
1200
1283
1341
1404
1476
$ 562
605
644
716
779
840
875
925
971
$ 584
631
673
739
811
875
913
961
1013
$ 605
657
694
762
827
886
925
974
1026
$ 621
685
717
779
861
924
966
1023
1087
$ 645
714
733
805
914
975
1014
1078
1148
$ 668
743
749
829
977
1035
1075
1145
1219
$ 706
781
795
878
1044
1111
1149
1221
1301
$ 784
919
962
1068
1318
1401
1459
1522
1594
$ 576
619
658
736
789
850
885
935
981
$ 598
645
687
753
821
885
923
971
1023
$ 619
671
708
776
861
920
959
1008
1060
$ 635
699
731
793
919
982
1024
1081
1145
$ 657
726
745
817
982
1043
1082
1146
1216
$ 678
753
759
839
1051
1109
1149
1219
1293
$ 716
791
805
888
1124
1191
1229
1301
1381
$ 794
929
1010
1116
1414
1497
1555
1618
1690
$ 586
629
668
746
803
864
899
949
995
$ 608
655
697
763
863
927
965
1013
1065
$ 629
681
718
786
913
972
1011
1060
1112
$ 645
709
741
803
981
1044
1086
1143
1207
$ 669
738
757
829
1048
1109
1148
1212
1282
$ 688
763
791
871
1129
1187
1227
1297
1371
$ 726
801
837
920
1208
1275
1313
1385
1465
$ 804
939
1060
1166
1514
1597
1655
1718
1790
$ 454
497
536
614
649
710
745
795
841
$ 476
523
565
631
681
745
783
831
883
$ 497
549
586
654
689
748
787
836
888
$ 513
577
609
671
717
780
822
879
943
$ 531
600
619
691
750
811
850
914
984
$ 548
623
629
709
783
841
881
951
1025
$ 586
661
675
758
836
903
941
1013
1093
$ 664
799
844
950
1056
1139
1197
1260
1332
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
109
UniGroup Too Price List
High-Performance Monolithic Fabric Panel/Low Profile Steel Top Cap
PLACES
Fabric
Features
Specification Tips
• For mixed fabric surfaces, price at higher fabric
grade.
• Panels will accept add-on panels up to a
combined height of 82″(2083mm). For aesthetic
consistency, specify PLACES add-on panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
• Additional base raceway end caps will need to
be specified if finish post are not ordered.
HFN-H (Non Powered)
• Includes non-powered or powered panel assembly,
low profile top cap, with or without one-piece base
raceway cover, 1.6 hinge kits, side trim rails, leveling
glides and carpet gripper; power distribution
assembly/flex connector(s) when power is specified.
.6 base raceway end caps are shipped with each
panel. Order additional as necessary.
• Acoustical panel surfaces.
• Panel surfaces may have the same fabric on both
sides or a different fabric on each side.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
HFP-H (3-Circuit Powered)
HFP-H6 (6-Circuit Powered)
To Order, Specify:
1) Product number.
2) Fabric/colorway for panel side one.
3) Fabric/colorway for panel side two.
C
R
4) Trim color for raceway cover, glide housings
and end caps.
US
NOTE:
5) Trim color for top cap and side trim rails.
This panel has fabric/colorway
restrictions, see systems fabrics/
color legend.
Non-Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Non-Powered (Example: HFN-4864-H) product numbers and list prices shown on opposite page:
Panel Width
Non-Powered without
Base Raceway Cover
(Example: HFN-4864-HE)
3-Circuit Powered without
Base Raceway Cover
(Example: HFP-4864-HE)
6-Circuit Powered without
Base Raceway Cover
(Example: HFP-4864-H6E)
or
or
3-Circuit Powered
(Example: HFP-4864-H)
6-Circuit Powered
(Example: HFP-4864-H6)
or
or
NYC 3-Circuit Powered
(Example: HFP-4864-HY)
NYC 6-Circuit Powered
(Example: HFP-4864-H6Y)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: HFP-4864-HYE)
NYC 6-Circuit Powered
without Base Raceway Cover
(Example: HFP-4864-H6YE)
Add:
Deduct:
Add:
Add:
Add:
12′′(305mm)
-$26
$155*
n/a
n/a
n/a
18′′(457mm)
-36
155
n/a
$107
n/a
24′′(610mm)
-44
155
$276
99
$220
30′′(762mm)
-46
155
276
96
217
36′′(914mm)
-50
155
276
87
208
42′′(1067mm)
-57
155
276
81
202
48′′(1219mm)
-60
155
276
75
196
54′′(1372mm)
-63
155
276
69
190
60′′(1524mm)
-69
155
276
63
184
*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Non-powered panels ship without receptacle ports in the base raceway cover.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
• For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power
Logic.
• For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.
110
April 2008 / USA
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
High-Performance Monolithic Fabric Panel/Low Profile Steel Top Cap
PLACES
Actual
Height
Fabric
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Non-Powered
Number
Fabric Grade
A
B
C
D
E
F
G
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HFN-1230- H
HFN-1830- H
HFN-2430- H
HFN-3030- H
HFN-3630- H
HFN-4230- H
HFN-4830- H
HFN-5430- H
HFN-6030- H
HFN-1237- H
HFN-1837- H
HFN-2437- H
HFN-3037- H
HFN-3637- H
HFN-4237- H
HFN-4837- H
HFN-5437- H
HFN-6037- H
HFN-1244- H
HFN-1844- H
HFN-2444- H
HFN-3044- H
HFN-3644- H
HFN-4244- H
HFN-4844- H
HFN-5444- H
HFN-6044- H
HFN-1250- H
HFN-1850- H
HFN-2450- H
HFN-3050- H
HFN-3650- H
HFN-4250- H
HFN-4850- H
HFN-5450- H
HFN-6050- H
HFN-1264- H
HFN-1864- H
HFN-2464- H
HFN-3064- H
HFN-3664- H
HFN-4264- H
HFN-4864- H
HFN-5464- H
HFN-6064- H
HFN-1268- H
HFN-1868- H
HFN-2468- H
HFN-3068- H
HFN-3668- H
HFN-4268- H
HFN-4868- H
HFN-5468- H
HFN-6068- H
HFN-1282- H
HFN-1882- H
HFN-2482- H
HFN-3082- H
HFN-3682- H
HFN-4282- H
HFN-4882- H
HFN-5482- H
HFN-6082- H
$ 534
584
631
720
763
833
875
936
993
$ 558
615
665
746
804
875
922
978
1041
$ 584
647
691
770
808
881
927
985
1050
$ 606
676
715
791
846
918
968
1036
1111
$ 648
736
744
838
921
991
1038
1125
1211
$ 690
780
799
897
986
1063
1111
1195
1290
$ 783
942
1000
1126
1248
1348
1412
1491
1576
$ 622
672
719
808
875
945
987
1048
1105
$ 646
703
753
834
916
987
1034
1090
1153
$ 672
735
779
858
920
993
1039
1097
1162
$ 694
764
803
879
958
1030
1080
1148
1223
$ 744
832
840
934
1043
1113
1160
1247
1333
$ 786
876
895
993
1108
1185
1233
1317
1412
$ 879
1038
1096
1222
1370
1470
1534
1613
1698
$ 666
716
763
852
929
999
1041
1102
1159
$ 690
747
797
878
970
1041
1088
1144
1207
$ 716
779
823
902
974
1047
1093
1151
1216
$ 738
808
847
923
1012
1084
1134
1202
1277
$ 792
880
888
982
1115
1185
1232
1319
1405
$ 834
924
943
1041
1180
1257
1305
1389
1484
$ 927
1086
1144
1270
1442
1542
1606
1685
1770
$ 676
726
773
862
939
1009
1051
1112
1169
$ 700
757
807
888
980
1051
1098
1154
1217
$ 726
789
833
912
976
1049
1095
1153
1218
$ 748
818
857
933
1036
1108
1158
1226
1301
$ 806
894
902
996
1167
1237
1284
1371
1457
$ 848
938
957
1055
1244
1321
1369
1453
1548
$ 941
1100
1158
1284
1560
1660
1724
1803
1888
$ 690
740
787
876
949
1019
1061
1122
1179
$ 714
771
821
902
990
1061
1108
1164
1227
$ 740
803
847
926
1026
1099
1145
1203
1268
$ 762
832
871
947
1096
1168
1218
1286
1361
$ 816
904
912
1006
1239
1309
1356
1443
1529
$ 858
948
967
1065
1324
1401
1449
1533
1628
$ 951
1110
1206
1332
1656
1756
1820
1899
1984
$ 700
750
797
886
963
1033
1075
1136
1193
$ 724
781
831
912
1032
1103
1150
1206
1269
$ 750
813
857
936
1078
1151
1197
1255
1320
$ 772
842
881
957
1156
1228
1278
1346
1421
$ 826
914
944
1038
1317
1387
1434
1521
1607
$ 868
958
999
1097
1408
1485
1533
1617
1712
$ 961
1120
1248
1380
1758
1858
1922
2001
2086
$ 568
618
665
754
809
879
921
982
1039
$ 592
649
699
780
850
921
968
1024
1087
$ 618
681
725
804
854
927
973
1031
1096
$ 640
710
749
825
892
964
1014
1082
1157
$ 686
774
782
876
971
1041
1088
1175
1261
$ 728
818
837
935
1036
1113
1161
1245
1340
$ 821
980
1038
1164
1298
1398
1462
1541
1626
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
111
UniGroup Too Price List
Ported Monolithic Fabric Panel with Low Profile Steel Top Cap
PLACES
Fabric Ported —
One Port Right or Left
HFP-R
(3-Circuit Powered —
Right Port)
C
R
HFP-L
(3-Circuit Powered—
Left Port)
US
NOTE:
This panel has fabric/colorway
restrictions, see systems fabrics/
color legend.
Features
Specification Tips
• Includes non-powered or powered panel assembly,
low profile top cap, with or without one-piece base
raceway cover, 1.6 hinge kits, side trim rails, leveling
glides and carpet gripper; power distribution
assembly/flex connector(s). .6 base raceway end
caps are shipped with each panel. Order additional as
necessary.
• Acoustical panel surfaces.
• Panel surfaces may have the same fabric on both
sides or a different fabric on each side.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
• Concealed 2′′(51mm) deep top raceway to store and
route communication cables.
• Cables are routed downward to ported opening above
worksurface through internal, vertical panel frame rail.
• Ported panels are only available as 3-circuit powered
(both port location and base). Chicago and New York
applications require modification of product number,
see below.
• Factory installed electrical power is routed upward to
the ported openings from the base raceway.
• A metal barrier, located inside the ported opening,
shields electrical wires from communication cables.
• Port option may be limited in New York City,
consult your local code authority prior to
specifying.
• For mixed fabric surfaces, price at higher fabric
grade.
• Panels will accept add-on panels up to a
combined height of 82″(2083mm). For aesthetic
consistency, specify PLACES add-on panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
• Additional base raceway end caps will need to
be specified if finish post are not ordered.
• When specifying two (2) colors, specify
finish/color for the side with the port first. Then
specify finish/color for the other side.
• Ported panels require separate specification
of port cover plates, see Specification Guide.
To Order, Specify:
1) Product number, including:
1 Port Specification:
R Right-hand
L
Left-hand
2) Fabric/colorway for panel side one (port side).
3) Fabric/colorway for panel side two.
4) Trim color for raceway cover, glide housings
and end caps.
5) Trim color for top cap and side trim rails.
Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Powered (Example: HFP-4864-R) product numbers and list prices shown on opposite page:
3-Circuit Powered without
Base Raceway Cover
(Example: HFP-4864-RE)
or
Panel Width
NYC 3-Circuit Powered
(Example: HFP-4864-RY)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: HFP-4864-RYE)
Chicago Powered
(Example: HFP-4864-RC)
Add:
Deduct:
Deduct:
36′′(914mm)
—
-$68
-$155
42′′(1067mm)
—
-74
-155
48′′(1219mm)
—
-80
-155
54′′(1372mm)
—
-86
-155
60′′(1524mm)
—
-92
-155
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
112
April 2008 / USA
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Ported Monolithic Fabric Panel with Low Profile Steel Top Cap
PLACES
Actual
Height
Fabric Ported —
One Port Right or Left
50′′(1270mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Powered
Number 1
Fabric Grade
A
B
C
D
E
F
G
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HFP-3650HFP-4250HFP-4850HFP-5450HFP-6050HFP-3664HFP-4264HFP-4864HFP-5464HFP-6064HFP-3668HFP-4268HFP-4868HFP-5468HFP-6068HFP-3682HFP-4282HFP-4882HFP-5482HFP-6082-
$1232
1304
1354
1422
1497
$1303
1373
1420
1507
1593
$1368
1445
1493
1577
1672
$1630
1730
1794
1873
1958
$1344
1416
1466
1534
1609
$1425
1495
1542
1629
1715
$1490
1567
1615
1699
1794
$1752
1852
1916
1995
2080
$1398
1470
1520
1588
1663
$1497
1567
1614
1701
1787
$1562
1639
1687
1771
1866
$1824
1924
1988
2067
2152
$1422
1494
1544
1612
1687
$1549
1619
1666
1753
1839
$1626
1703
1751
1835
1930
$1942
2042
2106
2185
2270
$1482
1554
1604
1672
1747
$1621
1691
1738
1825
1911
$1706
1783
1831
1915
2010
$2038
2138
2202
2281
2366
$1542
1614
1664
1732
1807
$1699
1769
1816
1903
1989
$1790
1867
1915
1999
2094
$2140
2240
2304
2581
2468
$1278
1350
1400
1468
1543
$1353
1423
1470
1557
1643
$1418
1495
1543
1627
1722
$1680
1780
1844
1923
2008
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
113
UniGroup Too Price List
Ported Monolithic Fabric Panel with Low Profile Steel Top Cap
PLACES
Fabric Ported—
One Port Each Side
HFP-1 (3-Circuit Powered)
C
R
US
NOTES:
Ports are back-to-back
onthis panel.
This panel has fabric/colorway
restrictions, see systems fabrics/
color legend.
Features
Specification Tips
• Includes non-powered or powered panel assembly,
low profile top cap, with or without one-piece base
raceway cover, 1.6 hinge kits, side trim rails, leveling
glides and carpet gripper; power distribution
assembly/flex connector(s). .6 base raceway end
caps are shipped with each panel. Order additional as
necessary.
• Acoustical panel surfaces.
• Panel surfaces may have the same fabric on both
sides or a different fabric on each side.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
• Concealed 2′′(51mm) deep top raceway to store and
route communication cables.
• Cables are routed downward to ported opening above
worksurface through internal, vertical panel frame rail.
• Ported panels are only available as 3-circuit powered
(both port location and base). Chicago and New York
applications require modification of product number,
see below.
• Factory installed electrical power is routed upward to
the ported openings from the base raceway.
• A metal barrier, located inside the ported opening,
shields electrical wires from communication cables.
• Port option may be limited in New York City,
consult your local code authority prior to
specifying.
• For mixed fabric surfaces, price at higher fabric
grade.
• Panels will accept add-on panels up to a
combined height of 82″(2083mm). For aesthetic
consistency, specify PLACES add-on panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
• Additional base raceway end caps will need to
be specified if finish post are not ordered.
• When specifying two (2) colors, specify
finish/color for the side with the port in the
right-hand position first. Then specify finish/color
for the other side.
• Ported panels require separate specification
of port cover plates, see Specification Guide.
To Order, Specify:
1) Product number.
2) Fabric/colorway for panel side one
(right-hand port side).
3) Fabric/colorway for panel side two.
4) Trim color for raceway cover, glide housings
and end caps.
5) Trim color for top cap and side trim rail.
Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Powered (Example: HFP-4864-1) product numbers and list prices shown on opposite page:
3-Circuit Powered without
Base Raceway Cover
(Example: HFP-4864-1E)
or
Panel Width
NYC 3-Circuit Powered
(Example: HFP-4864-1Y)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: HFP-4864-1YE)
Chicago Powered
(Example: HFP-4864-1C)
Add:
Deduct:
Deduct:
36′′(914mm)
—
-$68
-$155
42′′(1067mm)
—
-74
-155
48′′(1219mm)
—
-80
-155
54′′(1372mm)
—
-86
-155
60′′(1524mm)
—
-92
-155
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
114
April 2008 / USA
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Ported Monolithic Fabric Panel with Low Profile Steel Top Cap
PLACES
Actual
Height
Fabric Ported —
One Ported Each Side
50′′(1270mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Powered
Number
Fabric Grade
A
B
C
D
E
F
G
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HFP-3650-1
HFP-4250-1
HFP-4850-1
HFP-5450-1
HFP-6050-1
HFP-3664-1
HFP-4264-1
HFP-4864-1
HFP-5464-1
HFP-6064-1
HFP-3668-1
HFP-4268-1
HFP-4868-1
HFP-5468-1
HFP-6068-1
HFP-3682-1
HFP-4282-1
HFP-4882-1
HFP-5482-1
HFP-6082-1
$1275
1347
1397
1465
1540
$1346
1416
1463
1550
1636
$1411
1488
1536
1620
1715
$1673
1773
1837
1916
2001
$1387
1459
1509
1577
1652
$1468
1538
1585
1672
1758
$1533
1610
1658
1742
1837
$1795
1895
1959
2038
2123
$1441
1513
1563
1631
1706
$1540
1610
1657
1744
1830
$1605
1682
1730
1814
1909
$1867
1967
2031
2110
2195
$1465
1537
1587
1655
1730
$1592
1662
1709
1796
1882
$1669
1746
1794
1878
1973
$1985
2085
2149
2228
2313
$1525
1597
1647
1715
1790
$1664
1734
1781
1868
1954
$1749
1826
1874
1958
2053
$2081
2181
2245
2324
2409
$1585
1657
1707
1775
1850
$1742
1812
1859
1946
2032
$1833
1910
1958
2042
2137
$2183
2283
2347
2624
2511
$1321
1393
1443
1511
1586
$1396
1466
1513
1600
1686
$1461
1538
1586
1670
1765
$1723
1823
1887
1966
2051
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
115
UniGroup Too Price List
Ported Monolithic Fabric Panel with Low Profile Steel Top Cap
PLACES
Fabric Ported —
Two Ports, Same Side
HFP-2 (3-Circuit Powered)
C
R
US
NOTE:
This panel has fabric/colorway
restrictions, see systems fabrics/
color legend.
Features
Specification Tips
• Includes non-powered or powered panel assembly,
low profile top cap, with or without one-piece base
raceway cover, 1.6 hinge kits, side trim rails, leveling
glides and carpet gripper; power distribution
assembly/flex connector(s). .6 base raceway end
caps are shipped with each panel. Order additional as
necessary.
• Acoustical panel surfaces.
• Panel surfaces may have the same fabric on both
sides or a different fabric on each side.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
• Concealed 2′′(51mm) deep top raceway to store and
route communication cables.
• Cables are routed downward to ported opening above
worksurface through internal, vertical panel frame rail.
• Ported panels are only available as 3-circuit powered
(both port location and base). Chicago and New York
applications require modification of product number,
see below.
• Factory installed electrical power is routed upward to
the ported openings from the base raceway.
• A metal barrier, located inside the ported opening,
shields electrical wires from communication cables.
• Port option may be limited in New York City,
consult your local code authority prior to
specifying.
• For mixed fabric surfaces, price at higher fabric
grade.
• Panels will accept add-on panels up to a
combined height of 82″(2083mm). For aesthetic
consistency, specify PLACES add-on panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
• Additional base raceway end caps will need to
be specified if finish post are not ordered.
• When specifying two (2) colors, specify
finish/color for the side with the ports first. Then
specify finish/color for the other side.
• Ported panels require separate specification
of port cover plates, see Specification Guide.
To Order, Specify:
1) Product number.
2) Fabric/colorway for panel side one
(ported side).
3) Fabric/colorway for panel side two.
4) Trim color for raceway cover, glide housings
and end caps.
5) Trim color for top cap and side trim rails.
Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Powered (Example: HFP-4864-2) product numbers and list prices shown on opposite page:
3-Circuit Powered without
Base Raceway Cover
(Example: HFP-4864-2E)
or
Panel Width
NYC 3-Circuit Powered
(Example: HFP-4864-2Y)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: HFP-4864-2YE)
Chicago Powered
(Example: HFP-4864-2C)
Add:
Deduct:
Deduct:
36′′(914mm)
—
-$68
-$155
42′′(1067mm)
—
-74
-155
48′′(1219mm)
—
-80
-155
54′′(1372mm)
—
-86
-155
60′′(1524mm)
—
-92
-155
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
116
April 2008 / USA
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Ported Monolithic Fabric Panel with Low Profile Steel Top Cap
PLACES
Actual
Height
Fabric Ported —
Two Ports, Same Side
50′′(1270mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Powered
Number
Fabric Grade
A
B
C
D
E
F
G
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HFP-3650-2
HFP-4250-2
HFP-4850-2
HFP-5450-2
HFP-6050-2
HFP-3664-2
HFP-4264-2
HFP-4864-2
HFP-5464-2
HFP-6064-2
HFP-3668-2
HFP-4268-2
HFP-4868-2
HFP-5468-2
HFP-6068-2
HFP-3682-2
HFP-4282-2
HFP-4882-2
HFP-5482-2
HFP-6082-2
$1292
1364
1414
1482
1557
$1363
1433
1480
1567
1653
$1428
1505
1553
1637
1732
$1690
1790
1854
1933
2018
$1404
1476
1526
1594
1669
$1485
1555
1602
1689
1775
$1550
1627
1675
1759
1854
$1812
1912
1976
2055
2140
$1458
1530
1580
1648
1723
$1557
1627
1674
1761
1847
$1622
1699
1747
1831
1926
$1884
1984
2048
2127
2212
$1482
1554
1604
1672
1747
$1609
1679
1726
1813
1899
$1686
1763
1811
1895
1990
$2002
2102
2166
2245
2330
$1542
1614
1664
1732
1807
$1681
1751
1798
1885
1971
$1766
1843
1891
1975
2070
$2098
2198
2262
2341
2426
$1602
1674
1724
1792
1867
$1759
1829
1876
1963
2049
$1850
1927
1975
2059
2154
$2200
2300
2364
2641
2528
$1338
1410
1460
1528
1603
$1413
1483
1530
1617
1703
$1478
1555
1603
1687
1782
$1740
1840
1904
1983
2068
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
117
UniGroup Too Price List
Ported Monolithic Fabric Panel with Low Profile Steel Top Cap
PLACES
Fabric Ported —
Four Ports, Two Each Side
HFP-4 (3-Circuit Powered)
C
R
US
NOTES:
Ports are back-to-back
onthis panel.
This panel has fabric/colorway
restrictions, see systems fabrics/
color legend.
Features
Specification Tips
• Includes non-powered or powered panel assembly,
low profile top cap, with or without one-piece base
raceway cover, 1.6 hinge kits, side trim rails, leveling
glides and carpet gripper; power distribution
assembly/flex connector(s). .6 base raceway end
caps are shipped with each panel. Order additional as
necessary.
• Acoustical panel surfaces.
• Panel surfaces may have the same fabric on both
sides or a different fabric on each side.
• Panel thickness is 2′′(51mm).
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
• Concealed 2′′(51mm) deep top raceway to store and
route communication cables.
• Cables are routed downward to ported opening above
worksurface through internal, vertical panel frame rail.
• Ported panels are only available as 3-circuit powered
(both port location and base). Chicago and New York
applications require modification of product number,
see below.
• Factory installed electrical power is routed upward to
the ported openings from the base raceway.
• A metal barrier, located inside the ported opening,
shields electrical wires from communication cables.
• Port option may be limited in New York City,
consult your local code authority prior to
specifying.
• For mixed fabric surfaces, price at higher fabric
grade.
• Panels will accept add-on panels up to a
combined height of 82″(2083mm). For aesthetic
consistency, specify PLACES add-on panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
• Additional base raceway end caps will need to
be specified if finish post are not ordered.
• Ported panels require separate specification
of port cover plates, see Specification Guide.
To Order, Specify:
1) Product number.
2) Fabric/colorway for panel side one.
3) Fabric/colorway for panel side two.
4) Trim color for raceway cover, glide housings
and end caps.
5) Trim color for top cap and side trim rails.
Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Powered (Example: HFP-4864-4) product numbers and list prices shown on opposite page:
3-Circuit Powered without
Base Raceway Cover
(Example: HFP-4864-4E)
or
Panel Width
NYC 3-Circuit Powered
(Example: HFP-4864-4Y)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: HFP-4864-4YE)
Chicago Powered
(Example: HFP-4864-4C)
Add:
Deduct:
Deduct:
36′′(914mm)
—
-$68
-$155
42′′(1067mm)
—
-74
-155
48′′(1219mm)
—
-80
-155
54′′(1372mm)
—
-86
-155
60′′(1524mm)
—
-92
-155
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
118
April 2008 / USA
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Ported Monolithic Fabric Panel with Low Profile Steel Top Cap
PLACES
Actual
Height
Fabric Ported —
Four Ports, Two Each
Side
50′′(1270mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Powered
Number
Fabric Grade
A
B
C
D
E
F
G
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HFP-3650-4
HFP-4250-4
HFP-4850-4
HFP-5450-4
HFP-6050-4
HFP-3664-4
HFP-4264-4
HFP-4864-4
HFP-5464-4
HFP-6064-4
HFP-3668-4
HFP-4268-4
HFP-4868-4
HFP-5468-4
HFP-6068-4
HFP-3682-4
HFP-4282-4
HFP-4882-4
HFP-5482-4
HFP-6082-4
$1455
1527
1577
1645
1720
$1526
1596
1643
1730
1816
$1591
1668
1716
1800
1895
$1853
1953
2017
2096
2181
$1567
1639
1689
1757
1832
$1648
1718
1765
1852
1938
$1713
1790
1838
1922
2017
$1975
2075
2139
2218
2303
$1621
1693
1743
1811
1886
$1720
1790
1837
1924
2010
$1785
1862
1910
1994
2089
$2047
2147
2211
2290
2375
$1645
1717
1767
1835
1910
$1772
1842
1889
1976
2062
$1849
1926
1974
2058
2153
$2165
2265
2329
2408
2493
$1705
1777
1827
1895
1970
$1844
1914
1961
2048
2134
$1929
2006
2054
2138
2233
$2261
2361
2425
2504
2589
$1765
1837
1887
1955
2030
$1922
1992
2039
2126
2212
$2013
2090
2138
2222
2317
$2363
2463
2527
2804
2691
$1501
1573
1623
1691
1766
$1576
1646
1693
1780
1866
$1641
1718
1766
1850
1945
$1903
2003
2067
2146
2231
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
119
UniGroup Too Price List
Open Frame Monolithic Panel with Low Profile Steel Top Cap
PLACES
Open Frame
Features
Specification Tips
• Includes non-powered or powered panel assembly,
low profile top cap, with or without one-piece base
raceway cover, 1.6 hinge kits, side trim rails, leveling
glides and carpet gripper; power distribution
assembly/flex connector(s) when power is specified.
.6 base raceway end caps are shipped with each
panel. Order additional as necessary.
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
• Does not accept top feed modules.
• Panels will accept glazed add-on panels up to a
combined height of 82′′(2083mm). For aesthetic
consistency, specify PLACES add-on panels.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
• Additional base raceway end caps will need to
be specified if finish posts are not ordered.
To Order, Specify:
1) Product number.
2) Trim color for raceway cover, glide housings
and end caps.
3) Trim color for frame, top cap and side trim
rails.
HON (Non Powered)
C
R
HOP (3-Circuit Powered)
HOP-6 (6-Circuit Powered)
US
Non-Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Non-Powered (Example: HON-4864) product numbers and list prices shown on opposite page:
Panel Width
Non-Powered without
Base Raceway Cover
(Example: HON-4864-E)
3-Circuit Powered without
Base Raceway Cover
(Example: HOP-4864-E)
6-Circuit Powered without
Base Raceway Cover
(Example: HOP-4864-6E)
or
or
3-Circuit Powered
(Example: HOP-4864)
6-Circuit Powered
(Example: HOP-4864-6)
or
or
NYC 3-Circuit Powered
(Example: HOP-4864-Y)
NYC 6-Circuit Powered
(Example: HOP-4864-6Y)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: HOP-4864-YE)
NYC 6-Circuit Powered
without Base Raceway Cover
(Example: HOP-4864-6YE)
Add:
Deduct:
Add:
Add:
Add:
12′′(305mm)
-$26
$155*
n/a
n/a
n/a
18′′(457mm)
-36
155
n/a
$107
n/a
24′′(610mm)
-44
155
$276
99
$220
30′′(762mm)
-46
155
276
96
217
36′′(914mm)
-50
155
276
87
208
42′′(1067mm)
-57
155
276
81
202
48′′(1219mm)
-60
155
276
75
196
54′′(1372mm)
-63
155
276
69
190
60′′(1524mm)
-69
155
276
63
184
*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Non-powered panels ship without receptacle ports in the base raceway cover.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
• For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power
Logic.
• For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.
120
April 2008 / USA
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Open Frame Monolithic Panel with Low Profile Steel Top Cap
PLACES
Actual
Height
Open Frame
44′′(1118mm)
50′′(1270mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Non-Powered
Number
Price
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HON-1244HON-1844HON-2444HON-3044HON-3644HON-4244HON-4844HON-5444HON-6044HON-1250HON-1850HON-2450HON-3050HON-3650HON-4250HON-4850HON-5450HON-6050HON-1264HON-1864HON-2464HON-3064HON-3664HON-4264HON-4864HON-5464HON-6064HON-1268HON-1868HON-2468HON-3068HON-3668HON-4268HON-4868HON-5468HON-6068HON-1282HON-1882HON-2482HON-3082HON-3682HON-4282HON-4882HON-5482HON-6082-
$ 466
508
558
608
653
711
805
877
946
$ 481
524
573
623
680
748
840
908
987
$ 505
547
601
663
733
803
891
960
1032
$ 538
588
641
701
784
852
946
1014
1104
$ 612
664
742
830
969
1019
1079
1159
1253
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
121
UniGroup Too Price List
Glazed Monolithic Panels with Low Profile Steel Top Cap
PLACES
Glazed
Features
Specification Tips
• Includes non-powered or powered panel assembly,
low profile top cap, with or without one-piece base
raceway cover, 1.6 hinge kits, side trim rails, leveling
glides and carpet gripper; power distribution
assembly/flex connector(s) when power is specified.
.6 base raceway end caps are shipped with each
panel. Order additional as necessary.
• Base raceway is 4′′(102mm) high.
• Powered raceway with or without raceway cover
requires modified catalog number and list price.
• Powered panels are available for countries that utilize
120 volt 60 hertz electrical systems and U.S.
configured plugs and outlets.
• Shipped with unassembled top cap, base raceway
cover and side trim rails.
• Does not accept top feed modules.
• Panels will accept glazed add-on panels up to a
combined height of 82′′(2083mm). For aesthetic
consistency, specify PLACES add-on panels.
• Glazed panels accept muntin kits and wainscot
kits.
• Flex connectors provided for powered monolithic
panels accommodate straight in-line, inside 90В°,
and inside 120В° conditions (if applicable).
• Receptacles for powered panels must be
specified separately.
• Raceway cover must be separately specified for
option -E (no raceway cover).
• Additional base raceway end caps will need to
be specified if finish posts are not ordered.
To Order, Specify:
1) Product number.
2) Glazing finish color.
HGN (Non Powered)
C
R
3) Trim color for raceway cover, glide housings
and end caps.
HGP (3-Circuit Powered)
HGP-6 (6-Circuit Powered)
4) Trim color for frame, top cap and side trim
rails.
US
Non-Powered Panel with Base Raceway Cover, see opposite page.
The following options require modification of the 3-Circuit Non-Powered (Example: HGN-4864) product numbers and list prices shown on opposite page:
Panel Width
Non-Powered without
Base Raceway Cover
(Example: HGN-4864-E)
3-Circuit Powered
(Example: HGP-4864)
6-Circuit Powered
(Example: HGP-4864-6)
or
or
NYC 3-Circuit Powered
(Example: HGP-4864-Y)
3-Circuit Powered without
Base Raceway Cover
(Example: HGP-4864-E)
6-Circuit Powered without
Base Raceway Cover
(Example: HGP-4864-6E)
or
or
NYC 6-Circuit Powered
(Example: HGP-4864-6Y)
NYC 3-Circuit Powered
without Base Raceway Cover
(Example: HGP-4864-YE)
NYC 6-Circuit Powered
without Base Raceway Cover
(Example: HGP-4864-6YE)
Add:
Deduct:
Add:
Add:
Add:
12′′(305mm)
-$26
$155*
n/a
n/a
n/a
18′′(457mm)
-36
155
n/a
$107
n/a
24′′(610mm)
-44
155
$276
99
$220
30′′(762mm)
-46
155
276
96
217
36′′(914mm)
-50
155
276
87
208
42′′(1067mm)
-57
155
276
81
202
48′′(1219mm)
-60
155
276
75
196
54′′(1372mm)
-63
155
276
69
190
60′′(1524mm)
-69
155
276
63
184
*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.
NOTES:
• Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure
2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side.
• Non-powered panels ship without receptacle ports in the base raceway cover.
• Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for
power and communication port locations other than the standard powered base raceway cover.
• New York City (NYC) electrical applications require field installation of PDA.
• New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway
cover and separately specify metal covers through Haworth e-Parts.
• Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the
furniture layout is compliant.
• For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power
Logic.
• For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.
122
April 2008 / USA
Class BA – GSA: Open Market
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Glazed Monolithic Panels with Low Profile Steel Top Cap
PLACES
Actual
Height
Glazed
44′′(1118mm)
50′′(1270mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Non-Powered
Number
Clear or
Bronze Price
Frosted Price
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HGN-1244HGN-1844HGN-2444HGN-3044HGN-3644HGN-4244HGN-4844HGN-5444HGN-6044HGN-1250HGN-1850HGN-2450HGN-3050HGN-3650HGN-4250HGN-4850HGN-5450HGN-6050HGN-1264HGN-1864HGN-2464HGN-3064HGN-3664HGN-4264HGN-4864HGN-5464HGN-6064HGN-1268HGN-1868HGN-2468HGN-3068HGN-3668HGN-4268HGN-4868HGN-5468HGN-6068HGN-1282HGN-1882HGN-2482HGN-3082HGN-3682HGN-4282HGN-4882HGN-5482HGN-6082-
$ 646
726
810
904
993
1105
1208
1305
1406
$ 665
746
831
930
1034
1140
1233
1336
1434
$ 681
774
866
962
1066
1200
1290
1389
1504
$ 728
825
928
1016
1133
1282
1379
1479
1608
$ 835
985
1128
1237
1365
1537
1650
1765
1904
$ 800
880
964
1058
1232
1344
1447
1544
1645
$ 819
900
985
1084
1273
1379
1472
1575
1673
$ 876
969
1061
1157
1366
1500
1590
1689
1804
$ 923
1020
1123
1211
1433
1582
1679
1779
1908
$1030
1180
1323
1432
1665
1837
1950
2065
2204
Product marked with this symbol available as GSA open market.
Class BA – GSA: Open Market
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
123
UniGroup Too Price List
Monolithic Fabric Add-On Panel
PLACES
Fabric
HAF
NOTES:
This panel has fabric/colorway
restrictions, see systems fabrics/
color legend.
*Add-on panels cannot be used
with add-on panels ordered with
the SP** prefix.
124
April 2008 / USA
Features
To Order, Specify:
• Includes panel, vertical connector (bayonet), light
block, side trim rails, two full hinge sets, side trim rail
covers and top cap clips.
• Fabric add-on panels may be installed above any
straight fabric base or fabric add-on panels.*
• Both sides in same fabric; one color or different color
each side.
• Each base panel will accept two add-on panels.
• Lower Level add-on panel will accept overhead
components (load bearing). Second add-on panel
(top) is non-load bearing.
• Top rail of add-on panel will provide top wire
management.
• Utilizes top cap from base panel.
• Standard finish posts can be used.
• Same construction as PLACES Monolithic fabric
panel.
1) Product number.
Specification Tips
• For mixed fabric surfaces, specify fabric/color for
each fabric surface and price at higher grade.
• Add-on panels may be stacked a maximum of two
high in any order of height above a base panel.
• Add-on panel must match panel width.
• Combination of panel and add-on panel cannot
exceed 82′′(2083mm) in height.
• Cannot be used above any door, glazed, open-frame,
or glazed add-on panels.
• Base and add-on panel combinations should match
existing base panel heights so that end-of-runs and
finish posts can be used without field modification.
• Full-height trim rails required for end-of-run conditions
with a base panel and one add-on panel, separately
specified.
• For two high add-on panel applications specify
separately full-height side trim rail for base panel and
one high add on, for two high panel add on location
use side trim rail that ships with add-on panel.
• Clerestory can be added above fabric add-on panels.
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Fabric/colorway for add-on panel side one.
3) Fabric/colorway for add-on panel side two.
4) Trim color for side trim rails and trim strip.
UniGroup Too Price List
Monolithic Fabric Add-On Panel
PLACES
Actual
Height
Fabric
12′′(305mm)
14′′(356mm)
18′′(437mm)
20′′(508mm)
24′′(610mm)
Width
Number
Fabric Grade
A
B
C
D
E
F
G
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HAF-1212
HAF-1812
HAF-2412
HAF-3012
HAF-3612
HAF-4212
HAF-4812
HAF-5412
HAF-6012
HAF-1214
HAF-1814
HAF-2414
HAF-3014
HAF-3614
HAF-4214
HAF-4814
HAF-5414
HAF-6014
HAF-1218
HAF-1818
HAF-2418
HAF-3018
HAF-3618
HAF-4218
HAF-4818
HAF-5418
HAF-6018
HAF-1220
HAF-1820
HAF-2420
HAF-3020
HAF-3620
HAF-4220
HAF-4820
HAF-5420
HAF-6020
HAF-1224
HAF-1824
HAF-2424
HAF-3024
HAF-3624
HAF-4224
HAF-4824
HAF-5424
HAF-6024
$434
480
507
532
557
582
607
621
632
$443
492
523
548
570
594
618
631
642
$490
557
582
607
632
656
684
695
714
$505
561
589
617
645
675
696
713
730
$595
621
644
668
693
719
744
757
769
$514
560
587
612
637
662
687
701
712
$523
572
603
628
650
674
698
711
722
$570
637
662
687
712
736
764
775
794
$585
641
669
697
725
755
776
793
810
$675
701
724
748
773
799
824
837
849
$524
570
597
622
647
672
697
711
722
$533
582
613
638
660
684
708
721
732
$580
647
672
697
722
746
774
785
804
$595
651
679
707
735
765
786
803
820
$685
711
734
758
783
809
834
847
859
$534
580
607
632
657
682
707
721
732
$543
592
623
648
670
694
718
731
742
$590
657
682
707
732
756
784
795
814
$605
661
689
717
745
775
796
813
830
$695
721
744
768
801
827
852
865
877
$548
594
621
646
671
696
721
735
746
$557
606
637
662
684
708
732
745
756
$604
671
696
721
746
770
798
809
828
$619
675
703
731
767
797
810
835
852
$709
735
758
782
831
857
882
895
907
$558
604
631
656
681
706
731
745
756
$567
616
647
672
694
718
742
755
766
$614
681
706
731
770
792
820
831
850
$629
685
713
741
795
825
846
863
880
$719
745
768
792
867
893
918
931
943
$474
520
547
572
597
622
647
661
672
$483
532
563
588
610
634
658
671
682
$530
597
622
647
672
696
724
735
754
$545
601
629
657
685
715
736
753
770
$635
661
684
708
733
759
784
797
809
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
125
UniGroup Too Price List
Monolithic Glazed Add-On Panel
PLACES
Glazed
HAG
NOTE:
*Add-on panels cannot
be used with add-on
panels ordered with the
SP** prefix.
126
April 2008 / USA
Features
To Order, Specify:
• Includes panel, vertical connector (bayonet), light
block, side trim rails, two full hinge sets, side trim rail
cover, and top cap clips.
• Utilizes top cap from base panel.
• Glazed add-on panels may be installed above any
straight fabric, glazed, or open-frame base or add-on
panels.*
• Each base panel will accept two add-on panels.
• Glazed add-on panels will not accept any load
bearing components.
• Top rail of add-on panel will provide top wire
management.
• Glazing material for English Reeded, Checks Mix,
and Vertical Moire is textured on one side only.
Recommend installing the textured side to face the
interior of the workstation.
• Standard finish post and end-of-run posts can be
used.
1) Product number, including:
Specification Tips
• Specify glazed add-on panel based upon the type of
panel, fabric (F) or glazed/open-frame (G), that will be
directly below the add-on panel.
• Add-on panels may be stacked a maximum of two
high in any order of height above a base panel.
• Add-on panel must match base panel width.
• Combination of base panel and add-on panel cannot
exceed 82′′(2083mm) in height.
• Base and add-on panel combinations should match
existing base panel heights so that end-of-runs and
finish posts can be used without field modification.
• Cannot be used above doors.
• Does not accept top feed modules.
• Glazed add-on panels may be retrofitted in the field
for use on glazed or fabric base panels. A retrofit kit is
available as a service part.
• Full-height trim rails required for end-of-run conditions
with a base panel and one add-on panel, separately
specified.
• For two high add-on panel applications specify
separately full-height side trim rail for base panel and
one high add on, for two high panel add on location
use side trim rail that ships with add-on panel.
• Clerestory can be added above glazed add-on
panels.
Class BA – GSA: Open Market
Canadian Conversion Factor: Refer to haworth.com/Canada
1 Application Designation:
F
Glazed add-on panel directly above fabric
base panel or fabric add-on panel.
G Glazed add-on panel directly above
glazed and open frame base panel or
glazed add-on panel, add $23 list.
2) Glazing color or glass pattern.
3) Trim color for frame, side trim rails and trim
strip.
UniGroup Too Price List
Monolithic Glazed Add-On Panel
PLACES
Actual
Height
Glazed
12′′(305mm)
14′′(356mm)
18′′(457mm)
20′′(508mm)
24′′(610mm)
Width
Number 1
Clear/Bronze/
Frosted Price
English
Reeded Price
Checks Mix/
Vertical
Moire Price
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HAG-1212HAG-1812HAG-2412HAG-3012HAG-3612HAG-4212HAG-4812HAG-5412HAG-6012HAG-1214HAG-1814HAG-2414HAG-3014HAG-3614HAG-4214HAG-4814HAG-5414HAG-6014HAG-1218HAG-1818HAG-2418HAG-3018HAG-3618HAG-4218HAG-4818HAG-5418HAG-6018HAG-1220HAG-1820HAG-2420HAG-3020HAG-3620HAG-4220HAG-4820HAG-5420HAG-6020HAG-1224HAG-1824HAG-2424HAG-3024HAG-3624HAG-4224HAG-4824HAG-5424HAG-6024-
$471
519
547
572
596
622
646
667
685
$483
532
561
587
609
633
657
678
699
$529
596
622
646
671
696
722
734
754
$545
601
629
656
685
714
735
764
790
$634
660
684
708
733
758
784
809
827
NA
NA
$ 669
706
738
794
871
NA
933
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
$ 697
735
773
829
910
NA
1000
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
$ 771
808
842
909
1000
NA
1084
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
$ 804
841
878
947
1045
NA
1167
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
Product marked with this symbol available as GSA open market.
Class BA – GSA: Open Market
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
127
UniGroup Too Price List
Doors with Low Profile Steel Top Cap
PLACES
Actual
Height
Single Door— Laminate
82′′(2083mm)
Width
Door
Swing
Number 1
36′′(914mm)
42′′(1067mm)
Left
Left
HDS-3682HDS-4282-
$2053
$2279
Features
To Order, Specify:
• Includes complete panel assembly [hinge sets, carpet
gripper, door jamb, side trim rails, leveling glides and trim,
hollow core door (1 5/8′′(41mm) thick), door hinges,
hardware, brushed chrome knobs or ADA lever with lockset
and keys, and threshold].
• Both sides of door covered in same laminate surface color.
• Door shipped with left-hand swing and can be field-changed
for right-hand swing.
• 1′′(25mm) deep top communications raceway.
• No power and communications in base raceway.
1) Product number, including:
1 Handle Designation:
K Knob
H ADA lever, add $145 list.
2) Laminate surface color.
3) Trim color for raceway covers and glide
housings.
Specification Tips
4) Trim color for door jamb, top cap and side trim
rails.
• Door may be placed a maximum of 24′′(610mm) from
supporting panels at 90В°.
• Will not accept add-on panel.
NOTES:
Some building codes may restrict the use of
panel heights greater than 69 ′′(1753mm).
Consult your local code authority to assure
that the furniture layout is compliant prior to
installation.
Door Opening Clearance
HDS-L
Price
L
L
Door Size
Height
Width
3682
78 1/2′′(1994mm)
28 1/2′′(724mm)
4282
78 1/2′′(1994mm)
34 1/2′′(876mm)
Most building codes for new buildings require
a minimum clear door width of 32 ′′(813mm).
To meet this requirement, the 42 ′′(1067mm)
door must be ordered.
(Left-hand swing)
Single Door — Glazed
Actual
Height
82′′(2083mm)
Width
Number 1 2
Clear or
Bronze Price
Frosted
Price
36′′(914mm)
42′′(1067mm)
HDG-3682HDG-4282-
$2349
$2514
$2649
$2814
Features
To Order, Specify:
• Includes complete panel assembly [hinge sets, carpet
gripper, door jamb, side trim rails, leveling glides and trim,
hollow core door (1 5/8′′(41mm) thick), door hinges,
hardware, brushed chrome knobs or ADA lever with lockset
and keys, and threshold].
• Both sides of door covered in same laminate surface color.
• High-pressure laminate door surface.
• Door swing not field changeable.
• 1′′(25mm) deep top communications raceway.
• No power and communications in base raceway.
1) Product number, including:
1 Handle Designation:
K Knob
H ADA lever, add $145 list.
2 Door Swing
L
Left-hand
R Right-hand
Specification Tips
• Door may be placed a maximum of 24′′(610mm) from
supporting panels at 90В°.
• Will not accept add-on panel.
Door Opening Clearance
HDG-L
HDG-R
(Left-hand swing)
Door Size
Height
Width
3682
78 1/2′′(1994mm)
28 1/2′′(724mm)
4282
78 1/2′′(1994mm)
34 1/2′′(876mm)
2) Glazing finish color.
3) Laminate surface color.
4) Trim color for raceway covers and glide
housings.
5) Trim color for door jamb, top cap and side trim
rails.
NOTES:
Some building codes may restrict the use of
panel heights greater than 69 ′′(1753mm).
Consult your local code authority to assure
that the furniture layout is compliant prior to
installation.
(Right-hand swing)
Most building codes for new buildings require
a minimum clear door width of 32 ′′(813mm).
To meet this requirement, the 42 ′′(1067mm)
door must be ordered.
128
April 2008 / USA
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Doors with Low Profile Steel Top Cap
PLACES
Actual
Height
Single Door — Glazed with
Classic Muntins
82′′(2083mm)
Width
Number
36′′(914mm)
42′′(1067mm)
HDMC-3682HDMC-4282-
1 2
$2694
$2881
$2994
$3181
To Order, Specify:
• Includes complete panel assembly [hinge sets, carpet
gripper, door jamb, side trim rails, leveling glides and trim,
hollow core door (1 5/8′′(41mm) thick), door hinges,
hardware, brushed chrome knobs or ADA lever with lockset
and keys, and threshold].
• Both sides of door covered in same laminate surface color.
• Door swing not field changeable.
• 1′′(25mm) deep top communications raceway.
• No power and communications in base raceway.
1) Product number, including:
1 Handle Designation:
K Knob
H ADA lever, add $145 list.
2 Door Swing
L
Left-hand
R Right-hand
• Door may be placed a maximum of 24′′(610mm) from
supporting panels at 90В°.
• Will not accept add-on panel.
2) Glazing finish color.
3) Laminate surface color.
4) Trim color for raceway covers and glide
housings.
Door Opening Clearance
Door Size
Height
Width
3682
78 1/2′′(1994mm)
28 1/2′′(724mm)
4282
78 1/2′′(1994mm)
34 1/2′′(876mm)
5) Trim color for door jamb, top cap, muntins and
side trim rails.
NOTE:
HDMC-L
HDMC-R
Some building codes may restrict the use of
panel heights greater than 69 ′′(1753mm).
Consult your local code authority to assure
that the furniture layout is compliant prior to
installation.
(Right-hand swing)
Single Door — Glazed with
Horizontal Muntins
Most building codes for new buildings require
a minimum clear door width of 32 ′′(813mm).
To meet this requirement, the 42 ′′(1067mm)
door must be ordered.
Actual
Height
82′′(2083mm)
Width
Number
36′′(914mm)
42′′(1067mm)
HDMH-3682HDMH-4282-
Clear or
Bronze Price
Frosted
Price
$2618
$2793
$2918
$3093
To Order, Specify:
• Includes complete panel assembly [hinge sets, carpet
gripper, door jamb, side trim rails, leveling glides and trim,
hollow core door (1 5/8′′(41mm) thick), door hinges,
hardware, brushed chrome knobs or ADA lever with lockset
and keys, and threshold].
• Both sides of door covered in same laminate surface color.
• Door swing not field changeable.
• 1′′(25mm) deep top communications raceway.
• No power and communications in base raceway.
1) Product number, including:
1 Handle Designation:
K Knob
H ADA lever, add $145 list.
2 Door Swing
L
Left-hand
R Right-hand
• Door may be placed a maximum of 24′′(610mm) from
supporting panels at 90В°.
• Will not accept add-on panel.
2) Glazing finish color.
3) Laminate surface color.
4) Trim color for raceway covers and glide
housings.
Door Opening Clearance
HDMH-L
HDMH-R
1 2
Features
Specification Tips
(Left-hand swing)
Frosted
Price
Features
Specification Tips
(Left-hand swing)
Clear or
Bronze Price
Door Size
Height
Width
3682
78 1/2′′(1994mm)
28 1/2′′(724mm)
4282
78 1/2′′(1994mm)
34 1/2′′(876mm)
5) Trim color for door jamb, top cap, muntins and
side trim rails.
NOTE:
Some building codes may restrict the use of
panel heights greater than 69 ′′(1753mm).
Consult your local code authority to assure
that the furniture layout is compliant prior to
installation.
(Right-hand swing)
Most building codes for new buildings require
a minimum clear door width of 32 ′′(813mm).
To meet this requirement, the 42 ′′(1067mm)
door must be ordered.
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
129
UniGroup Too Price List
if Panel Attached Screen
PLACES
if Panel Attached Screen
Height
Width
Description
Number
Price
47′′(1194mm)
52′′(1321mm)
63′′(1600mm)
47′′(1194mm)
52′′(1321mm)
63′′(1600mm)
52′′(1321mm)
63′′(1600mm)
48′′(1219mm)
Fabric
48′′(1219mm)
Frosted Insert
48′′(1219mm)
Perforated Metal
BBP-4748-FH
BBP-5248-FH
BBP-6348-FH
BBP-4748-GH
BBP-5248-GH
BBP-6348-GH
BBP-5248-PH
BBP-6348-PH
$ 815
860
906
$ 999
1058
1116
$1087
1146
Features
To Order, Specify:
• Includes screen, two non-locking casters on post legs and
attachment brackets.
• Fabric and perforated metal insert screens have no acoustical
or tackable value.
• Screens are non-load bearing.
• Magnets can be used with perforated metal inserts.
• Frosted insert is identical to frosted and textured acrylic
material used in if desktop screens.
• Brackets are shipped unassembled.
BBP-FH
BBP-GH
BBP-PH
Fabric Insert
1) Product number.
2) Screen fabric insert color.
FB-1 Warm Neutral
FB-2 Cool Neutral
3) Metallic trim color for frame.
4) Trim color for panel attachment brackets.
5) Trim color for casters.
Specification Tips
• Screens can mount on any width panel but panel runs must
be at least 48′′(1219mm).
• Screens mount on a panel taller than height of screen only.
• Screen adds 2′′(51mm) to panel width in stored position.
• Screen extends 42′′(1067mm) from end of panel in fully
extended position.
• Screens mount parallel with panel, off panel end only.
• Screen adds 2′′(51mm) to panel thickness.
• Panel attached screen brackets may interfere with
components mounted to opposite side of panel.
• Fabric screen insert available in warm and cool neutral only.
• Screens are non-handed; brackets can be attached to either
side.
• See Specification Guide for additional information.
Frosted Insert
1) Product number.
2) Trim color for frame.
3) Trim color for panel attachment brackets.
4) Metal trim color for casters.
Metal Insert
1) Product number.
2) Trim color for frame.
3) Trim color for perforated metal insert.
4) Trim color for panel attachment brackets.
5) Metallic trim color for casters.
130
April 2008 / USA
Class IF – SIN 711-1; Discount Group XI
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Panel Accessories
PLACES
Muntin Kit — Classic —
Painted
Panel Height
Panel Width
Number
Price
44′′(1118mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
MSC-1842
MSC-242
MSC-3042
MSC-342
MSC-4242
MSC-442
MSC-5442
MSC-542
MSC-1866
MSC-266
MSC-3066
MSC-366
MSC-4266
MSC-466
MSC-5466
MSC-566
MSC-1880
MSC-280
MSC-3080
MSC-380
MSC-4280
MSC-480
MSC-5480
MSC-580
$350
353
387
390
433
436
454
458
$391
394
433
436
486
489
507
510
$421
425
467
470
524
527
551
554
68′′(1727mm)
82′′(2083mm)
MSC
Features
To Order, Specify:
• Includes set of muntins for each side of glazed panel, and
attachment hardware.
• Requires field assembly.
• Apply to glazed panels in heights and widths listed.
• Muntins are 1/2′′(12mm) thick.
1) Product number.
2) Trim color.
Specification Tips
• Glazed panel must be separately specified.
• Applicable to UniGroup and PLACES glazed panels.
Muntin Kit — Horizontal —
Painted
44′′(1118mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
68′′(1727mm)
82′′(2083mm)
MSH
MSH-142
MSH-1842
MSH-242
MSH-3042
MSH-342
MSH-4242
MSH-442
MSH-5442
MSH-542
MSH-166
MSH-1866
MSH-266
MSH-3066
MSH-366
MSH-4266
MSH-466
MSH-5466
MSH-566
MSH-180
MSH-1880
MSH-280
MSH-3080
MSH-380
MSH-4280
MSH-480
MSH-5480
MSH-580
Features
To Order, Specify:
• Includes set of muntins for each side of glazed panel, and
attachment hardware.
• Requires field assembly.
• Apply to glazed panels in heights and widths listed.
• Muntins are 1/2′′(12mm) thick.
1) Product number.
$181
261
300
320
331
361
377
387
394
$222
318
353
374
390
422
436
453
458
$240
347
383
411
423
455
471
491
500
2) Trim color.
Specification Tips
• Glazed panel must be separately specified.
• Applicable to UniGroup and PLACES glazed panels.
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
131
UniGroup Too Price List
Panel Accessories
PLACES
Wainscot Kit
Painted Rail — Fabric Panel
Installed Height
Panel Width
Number
Price
30′′(762mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
WK-129
WK-1829
WK-229
WK-3029
WK-329
WK-4229
WK-429
WK-5429
WK-529
$268
285
293
308
315
330
337
344
352
Features
To Order, Specify:
• Includes set of two (2) recessed fabric panels (1 for each
side), two (2) rails, and attachment hardware.
• Requires field assembly.
• Apply to both sides of any glazed panel.
• For mixed fabric surfaces, specify fabric/color for each side.
1) Product number.
Specification Tips
2) Fabric/colorway for panel side one.
3) Fabric/colorway for panel side two.
4) Rail trim color. $23 upcharge (list) for Metallic
trim color.
• Glazed panel must be separately specified.
• Can be used with UniGroup Too, UniGroup and PLACES
glazed panels.
WK
Wainscot with Horizontal
Muntins — Painted Rail and
Muntins — Fabric Panel
68′′(1727mm)
82′′(2083mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
WMSH-166
WMSH-1866
WMSH-266
WMSH-3066
WMSH-366
WMSH-4266
WMSH-466
WMSH-5466
WMSH-566
WMSH-180
WMSH-1880
WMSH-280
WMSH-3080
WMSH-380
WMSH-4280
WMSH-480
WMSH-5480
WMSH-580
$492
602
657
691
720
757
792
814
827
$517
621
689
727
757
792
820
847
861
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
WMSC-1866
WMSC-266
WMSC-3066
WMSC-366
WMSC-4266
WMSC-466
WMSC-5466
WMSC-566
WMSC-1880
WMSC-280
WMSC-3080
WMSC-380
WMSC-4280
WMSC-480
WMSC-5480
WMSC-580
$696
720
759
785
832
860
885
902
$718
741
783
810
858
888
912
931
WMSH
Wainscot with Classic Muntins 68′′(1727mm)
Painted — Rail and Muntins —
Fabric Panel
82′′(2083mm)
WMSC
Common Features
To Order, Specify:
• Includes set of two (2) recessed fabric panels (1 for each side),
two (2) rails, set of muntins for each side, and attachment
hardware.
• Requires field assembly.
• Apply to both sides of glazed panels in sizes listed.
• For mixed fabric surfaces, specify fabric/color for each side.
1) Product number.
Specification Tips
• Glazed panel must be separately specified.
• Can be used with UniGroup and PLACES glazed panels.
132
April 2008 / USA
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Fabric/colorway for panel side one.
3) Fabric/colorway for panel side two.
4) Rail/muntin trim color.
UniGroup Too Price List
Panel Accessories
PLACES
Actual
Height
90° Finish Post — Low Profile
30′′(762mm)
Wood Top Cap — Wood Surface 37′′(940mm)
Width
Number
Price
2′′(51mm)
HWPC-0030-T
HWPC-0037-T
HWPC-0044-T
HWPC-0050-T
HWPC-0056-T
HWPC-0064-T
HWPC-0068-T
HWPC-0082-T
$162
168
176
182
183
184
195
198
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Features
To Order, Specify:
• Includes 90° wood vertical cover, low profile wood top cap
and base raceway cover.
• Required by UL for covering base raceway flexible and
straight-span power connectors when power connector
covers are not used.
• Finish posts are required for wood top cap panel
configurations.
1) Product number.
2) Fabric surface and color.
3) Trim color for raceway cover.
4) Wood finish color for top cap.
HWPC-T
90° Finish Post — Low Profile
Wood Top Cap — Fabric
Surface
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
2′′(51mm)
HFPC-0030-T
HFPC-0037-T
HFPC-0044-T
HFPC-0050-T
HFPC-0056-T
HFPC-0064-T
HFPC-0068-T
HFPC-0082-T
Features
To Order, Specify:
• Includes 90° fabric vertical cover, low profile wood top cap
and base raceway cover.
• Required by UL for covering base raceway flexible and
straight-span power connectors when power connector
covers are not used.
• Finish posts are required for wood top cap panel
configurations.
1) Product number.
$102
105
112
114
116
117
124
126
2) Fabric surface and color.
3) Trim color for raceway cover.
4) Wood finish color for top cap.
HFPC-T
90° Finish Post — Low Profile 30′′(762mm)
Steel Top Cap — Fabric Surface 37′′(940mm)
2′′(51mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
HFPC-0030
HFPC-0037
HFPC-0044
HFPC-0050
HFPC-0056
HFPC-0064
HFPC-0068
HFPC-0082
Features
To Order, Specify:
• Includes 90° fabric vertical cover, low profile steel top cap and
base raceway cover.
• Required by UL for covering base raceway flexible and
straight-span power connectors when power connector
covers are not used.
1) Product number.
$ 76
79
83
87
89
91
97
100
2) Fabric surface and color.
3) Trim color for raceway cover.
4) Trim color for top cap.
HFPC
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
133
UniGroup Too Price List
Panel Accessories
PLACES
Actual
Height
90° Finish Post — Low Profile
Steel Top Cap — Painted
Surface
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Width
Number
Price
2′′(51mm)
HDPC-0030
HDPC-0037
HDPC-0044
HDPC-0050
HDPC-0056
HDPC-0064
HDPC-0068
HDPC-0082
$74
77
81
85
87
89
95
98
Features
To Order, Specify:
• Includes 90° painted vertical cover, low profile steel top cap
and base raceway cover.
• Required by UL for covering base raceway flexible and
straight-span power connectors when power connector
covers are not used.
1) Product number.
2) Painted surface color.
3) Trim color for raceway cover.
4) Trim color for top cap.
HDPC
Class BA
90° Power Connector Cover —
Radius Profile
4′′(102mm)
PCC-90-B
Features
To Order, Specify:
• Includes six (6) covers.
• Required by UL for covering flexible power connector in 90°
panel configurations when finish post is not used.
1) Product number.
$55
2) Trim color.
Specification Tip
• For use with UniGroup and PLACES.
PCC-90-B
Class AA
120° Finish Post — Low Profile 44′′(1118mm)
Steel Top Cap — Fabric Surface 64′′(1626mm)
2′′(51mm)
68′′(1727mm)
SPLA-1270
SPLA-3945
SPLA-1272
Features
To Order, Specify:
• Includes 120° fabric vertical cover, low profile steel top cap
and base raceway cover.
• Required by UL for covering raceway flexible and
straight-span power connectors when power connector
covers are not used.
1) Product number.
$235
240
245
2) Fabric surface and color.
3) Trim color for raceway cover.
4) Trim color for top cap.
SPLA-1270
Class BA
180° Finish Post — Low Profile 30′′(762mm)
Wood Top Cap — Wood Surface 37′′(940mm)
2′′(51mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Features
To Order, Specify:
• Includes 180° wood vertical cover, low profile wood top cap
and base raceway cover.
• Required by UL for covering base raceway flexible and
straight-span power connectors when power connector
covers are not used.
• Finish post are required for wood top cap panel
configurations.
1) Product number.
HWPS-T
Class BA
134
April 2008 / USA
HWPS-0030-T
HWPS-0037-T
HWPS-0044-T
HWPS-0050-T
HWPS-0056-T
HWPS-0064-T
HWPS-0068-T
HWPS-0082-T
SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Wood finish color for post surface.
3) Trim color for raceway cover.
4) Wood finish color for top cap.
$155
166
172
188
189
190
197
211
UniGroup Too Price List
Panel Accessories
PLACES
Actual
Height
180° Finish Post — Low Profile
Wood Top Cap — Fabric Surface
180° Finish Post — Low Profile
Steel Top Cap— Fabric Surface
Number
Price
2′′(51mm)
HFPS-0030-T
HFPS-0037-T
HFPS-0044-T
HFPS-0050-T
HFPS-0056-T
HFPS-0064-T
HFPS-0068-T
HFPS-0082-T
$111
121
135
140
143
145
151
160
Features
To Order, Specify:
• Includes 180° fabric vertical cover, low profile wood top cap
and base raceway cover.
• Required by UL for covering base raceway flexible and
straight-span power connectors when power connector
covers are not used.
• Finish posts are required for wood top cap panel
configurations.
1) Product number.
2) Fabric surface and color.
3) Trim color for raceway cover.
4) Wood finish color for top cap.
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
2′′(51mm)
HFPS-0030
HFPS-0037
HFPS-0044
HFPS-0050
HFPS-0056
HFPS-0064
HFPS-0068
HFPS-0082
Features
To Order, Specify:
• Includes 180° fabric vertical cover, low profile steel top cap
and base raceway cover.
• Required by UL for covering base raceway flexible and
straight-span power connectors when power connector
covers are not used.
1) Product number.
$64
70
74
79
82
84
87
95
2) Fabric surface and color.
3) Trim color for raceway cover.
4) Trim color for top cap.
Class BA
180° Finish Post — Low Profile
Steel Top Cap— Painted Surface
HDPS
Width
Class BA
HFPS-T
HFPS
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
2′′(51mm)
HDPS-0030
HDPS-0037
HDPS-0044
HDPS-0050
HDPS-0056
HDPS-0064
HDPS-0068
HDPS-0082
Features
To Order, Specify:
• Includes 180° painted vertical cover, low profile steel top cap
and base raceway cover.
• Required by UL for covering base raceway flexible and
straight-span power connectors when power connector
covers are not used.
1) Product number.
$62
68
72
77
80
82
85
93
2) Painted surface trim color.
3) Trim color for raceway cover.
4) Trim color for top cap.
Class BA
180В° Power Connector Cover
PCC-180-B
Class AA
4′′(102mm)
PCC-180-B
Features
To Order, Specify:
• Includes six (6) covers.
• Required by UL for covering straight-span or flexible power
connectors in 180В°, three-way panel configurations when
finish post is not used.
1) Product number.
$55
2) Trim color.
Specification Tip
• For use with UniGroup Too, UniGroup and PLACES panels.
SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
135
UniGroup Too Price List
Panel Accessories
PLACES
Actual
Height
End-of-Run Finish Post — Low 30′′(762mm)
Profile Wood Top Cap — Wood 37′′(940mm)
Surface
44′′(1118mm)
Width
Number
Price
2′′(51mm)
HWER-0030-T
HWER-0037-T
HWER-0044-T
HWER-0050-T
HWER-0056-T
HWER-0064-T
HWER-0068-T
HWER-0082-T
$113
118
123
140
154
167
181
218
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
Features
To Order, Specify:
• Includes end-of-run wood vertical cover, low profile wood top
cap and base raceway cover.
• Required whenever metal side rail is exposed at end of
panel run.
• Finish posts are required for wood top cap panel
configurations.
1) Product number.
2) Wood finish color.
3) Trim color for raceway cover.
4) Wood finish color for top cap.
HWER-T
End-of-Run Finish Post — Low 30′′(762mm)
Profile Wood Top Cap — Fabric 37′′(940mm)
Surface
44′′(1118mm)
2′′(51mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
HFER-0030-T
HFER-0037-T
HFER-0044-T
HFER-0050-T
HFER-0056-T
HFER-0064-T
HFER-0068-T
HFER-0082-T
Features
To Order, Specify:
• Includes end-of-run fabric vertical cover, low profile wood top
cap and base raceway cover.
• Required whenever metal side rail is exposed at end of
panel run.
• Finish posts are required for wood top cap panel
configurations.
1) Product number.
$ 86
89
95
106
118
130
138
169
2) Fabric surface and color.
3) Trim color for raceway cover.
4) Wood finish color for top cap.
HFER-T
End-of-Run Finish Post — Low 30′′(762mm)
Profile Steel Top Cap — Fabric 37′′(940mm)
Surface
44′′(1118mm)
2′′(51mm)
56′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
HPER-0030
HPER-0037
HPER-0044
HPER-0050
HPER-0056
HPER-0064
HPER-0068
HPER-0082
Features
To Order, Specify:
• Includes end-of-run fabric vertical cover, low profile steel top
cap and base raceway cover.
• Attaches to panel side rail at end of panel run.
1) Product number.
2) Fabric surface and color.
3) Trim color for raceway cover.
4) Trim color for top cap.
HPER
136
April 2008 / USA
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
$ 84
88
95
100
112
124
132
142
UniGroup Too Price List
Panel Accessories
PLACES
Actual
Height
End-of-Run Variable Height
Finish Post — Coped — Low
Profile Wood Top Cap — Wood
Surface
HVWE-C
4′′(102mm)
6′′(152mm)
7′′(178mm)
8′′(203mm)
12′′(305mm)
13′′(330mm)
14′′(356mm)
18′′(457mm)
19′′(483mm)
20′′(508mm)
24′′(610mm)
26′′(660mm)
27′′(686mm)
31′′(787mm)
32′′(813mm)
34′′(864mm)
38′′(965mm)
45′′(1143mm)
52′′(1321mm)
Width
Number
Price
2′′(51mm)
HVWE-0004-C
HVWE-0006-C
HVWE-0007-C
HVWE-0008-C
HVWE-0012-C
HVWE-0013-C
HVWE-0014-C
HVWE-0018-C
HVWE-0019-C
HVWE-0020-C
HVWE-0024-C
HVWE-0026-C
HVWE-0027-C
HVWE-0031-C
HVWE-0032-C
HVWE-0034-C
HVWE-0038-C
HVWE-0045-C
HVWE-0052-C
$ 68
72
74
75
91
93
94
108
112
113
123
136
137
144
145
149
154
169
192
Features
To Order, Specify:
• Includes end-of-run wood vertical cover with coped end and
low profile wood top cap.
• Required on exposed portion of taller panel side rail where
two panels of different heights meet.
• Bottom of post is shaped to fit curve of top cap.
• For straight panel line applications only.
• Finish posts are required for wood top cap panel
configurations.
1) Product number.
2) Wood finish color for post.
3) Wood finish color for top cap.
Specification Tip
• Use for in-line panel applications.
End-of-Run Variable Height
Finish Post — Coped — Low
Profile Wood Top Cap — Fabric
Surface
HVFE-C
4′′(102mm)
6′′(152mm)
7′′(178mm)
8′′(203mm)
12′′(305mm)
13′′(330mm)
14′′(356mm)
18′′(457mm)
19′′(483mm)
20′′(508mm)
24′′(610mm)
26′′(660mm)
27′′(686mm)
31′′(787mm)
32′′(813mm)
34′′(864mm)
38′′(965mm)
45′′(1143mm)
52′′(1321mm)
2′′(51mm)
HVFE-0004-C
HVFE-0006-C
HVFE-0007-C
HVFE-0008-C
HVFE-0012-C
HVFE-0013-C
HVFE-0014-C
HVFE-0018-C
HVFE-0019-C
HVFE-0020-C
HVFE-0024-C
HVFE-0026-C
HVFE-0027-C
HVFE-0031-C
HVFE-0032-C
HVFE-0034-C
HVFE-0038-C
HVFE-0045-C
HVFE-0052-C
Features
To Order, Specify:
• Includes end-of-run fabric vertical cover with coped end and
low profile wood top cap.
• Required on exposed portion of taller panel side rail where
two panels of different heights meet.
• Bottom of post is shaped to fit curve of top cap.
• For straight panel line applications only.
• Finish posts are required for wood top cap panel
configurations.
1) Product number.
$ 41
48
50
51
62
63
73
82
85
87
96
103
104
117
118
121
125
127
144
2) Fabric surface and color.
3) Wood finish color for top cap.
Specification Tip
• Use for in-line panel applications.
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
137
UniGroup Too Price List
Panel Accessories
PLACES
Actual
Height
End-of-Run Variable Height
Finish Post — Regular — Low
Profile Wood Top Cap — Wood
Surface
HVWE
End-of-Run Variable Height
Finish Post — Regular — Low
Profile Wood Top Cap — Fabric
Surface
HVFE
138
April 2008 / USA
4′′(102mm)
6′′(152mm)
7′′(178mm)
8′′(203mm)
12′′(305mm)
13′′(330mm)
14′′(356mm)
18′′(457mm)
19′′(483mm)
20′′(508mm)
24′′(610mm)
26′′(660mm)
27′′(686mm)
31′′(787mm)
32′′(813mm)
34′′(864mm)
38′′(965mm)
45′′(1143mm)
52′′(1321mm)
Width
Number
Price
2′′(51mm)
HVWE-0004
HVWE-0006
HVWE-0007
HVWE-0008
HVWE-0012
HVWE-0013
HVWE-0014
HVWE-0018
HVWE-0019
HVWE-0020
HVWE-0024
HVWE-0026
HVWE-0027
HVWE-0031
HVWE-0032
HVWE-0034
HVWE-0038
HVWE-0045
HVWE-0052
$ 59
61
63
64
80
82
83
97
101
102
109
122
123
130
131
135
140
154
177
Features
To Order, Specify:
• Includes end-of-run wood vertical cover with regular end and
low profile wood top cap.
• Required on exposed portion of taller panel side rail where
two or more panels of different heights meet.
• Always use in conjunction with finish posts.
• Finish posts are required for wood top cap panel
configurations.
1) Product number.
4′′(102mm)
6′′(152mm)
8′′(203mm)
12′′(305mm)
13′′(330mm)
14′′(356mm)
18′′(457mm)
19′′(483mm)
20′′(508mm)
24′′(610mm)
26′′(660mm)
27′′(686mm)
31′′(787mm)
32′′(813mm)
34′′(864mm)
38′′(965mm)
45′′(1143mm)
52′′(1321mm)
2′′(51mm)
2) Wood finish color for post.
3) Wood finish color for top cap.
HVFE-0004
HVFE-0006
HVFE-0008
HVFE-0012
HVFE-0013
HVFE-0014
HVFE-0018
HVFE-0019
HVFE-0020
HVFE-0024
HVFE-0026
HVFE-0027
HVFE-0031
HVFE-0032
HVFE-0034
HVFE-0038
HVFE-0045
HVFE-0052
Features
To Order, Specify:
• Includes end-of-run fabric vertical cover with regular end and
low profile wood top cap.
• Required on exposed portion of taller panel side rail where
two or more panels of different heights meet.
• Always use in conjunction with finish posts.
• Finish posts are required for wood top cap panel
configurations.
1) Product number.
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Fabric surface and color.
3) Wood finish color for top cap.
$ 30
37
40
50
51
61
69
72
74
83
88
89
102
103
106
110
112
128
UniGroup Too Price List
Panel Accessories
PLACES
Actual
Height
Low Profile Wood Top Cap Kit
5/8′′(16mm)
Width
Depth
Number
Price
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
2′′(51mm)
HTCW-0012
HTCW-0018
HTCW-0024
HTCW-0030
HTCW-0036
HTCW-0042
HTCW-0048
HTCW-0054
HTCW-0060
$ 60
80
97
116
135
140
167
176
205
Features
To Order, Specify:
• Includes low profile wood top cap and panel alignment tab.
• For replacement of low profile steel and wood top cap.
1) Product number.
HTCW
90В° Low Profile Wood Top Cap
for 2-Way
5/8′′(16mm)
2′′(51mm)
2′′(51mm)
2) Wood finish color.
HTCC-0090
Features
To Order, Specify:
• Includes one low profile wood top cap and attachment
hardware.
• For field replacement only.
1) Product number.
$50
2) Wood finish color.
HTCC-0090
180В° Low Profile Wood Top
Cap for 3-Way
5/8′′(16mm)
2′′(51mm)
2′′(51mm)
HTCS-0180
Features
To Order, Specify:
• Includes one low profile wood top cap and attachment
hardware.
• For field replacement only.
1) Product number.
$49
2) Wood finish color.
HTCS-0180
90В° Low Profile Wood Top
Cap for 4-Way
5/8′′(16mm)
2′′(51mm)
2′′(51mm)
HTFW-0004
Features
To Order, Specify:
• Includes one low profile wood top cap and attachment
hardware.
• Fills gap at intersection of four PLACES low profile wood top
cap panels.
1) Product number.
$49
2) Wood finish color.
HTFW-0004
In-Line Low Profile Wood
Top Cap
5/8′′(16mm)
2′′(51mm)
2′′(51mm)
HTCW-0002
Features
To Order, Specify:
• Includes one in-line low profile wood top cap and attachment
hardware.
• Required in condition illustrated.
• Always use in conjunction with 180° finish posts.
1) Product number.
$49
2) Wood finish color.
HTCW-0002
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
139
UniGroup Too Price List
Panel Accessories
PLACES
Actual
Height
End-of-Run Finish Post —
Wood Top Cap
Width
5/8′′(16mm)
Number
Price
2′′(51mm)
HTCE-0001
Features
To Order, Specify:
• Includes wood top cap and attachment hardware.
• Replacement wood top cap for end-of-run finish posts, wood
or fabric surface.
1) Product number.
$25
2) Wood finish color.
HTCE
Low Profile Steel Top Cap for
3-Way and 4-Way
7/16′′(11mm)
2′′(51mm)
2′′(51mm)
Features
To Order, Specify:
• Includes one plastic top cap.
• Fills gap at intersection of three or four PLACES low profile
steel top cap panels.
1) Product number.
HTF-0004
140
April 2008 / USA
HTF-0004
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Trim color.
$22
UniGroup Too Price List
Panel Accessories
PLACES
Side Trim Rail With Notch
HRE
Full Height Side Trim Rail –
for use with Add-On Panels
Panel
Height
Number
Price
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
HRE-0030
HRE-0037
HRE-0044
HRE-0050
HRE-0056
HRE-0064
HRE-0068
HRE-0082
$50
54
61
69
70
71
76
79
Features
To Order, Specify:
• Includes one notched side rail.
• Two side rails are included with each panel; order as
replacement for base panel only.
1) Product number.
2) Trim color.
Height
Base Panel
Height/Add-On
Number
Price
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
64′′(1626mm)
68′′(1727mm)
68′′(1727mm)
82′′(2083mm)
82′′(2083mm)
30′′(762mm)/14′′(356mm)
30′′(762mm)/20′′(508mm)
44′′(1118mm)/12′′(305mm)
44′′(1118mm)/20′′(508mm)
44′′(1118mm)/24′′(610mm)
50′′(1270mm)/14′′(356mm)
50′′(1270mm)/18′′(457mm)
56′′(1422mm)/12′′(305mm)
64′′(1626mm)/18′′(457mm)
68′′(1727mm)/14′′(356mm)
HREH-3014
HREH-3020
HREH-4412
HREH-4420
HREH-4424
HREH-5014
HREH-5018
HREH-5612
HREH-6418
HREH-6814
$ 57
75
$ 82
91
91
$100
100
$100
$104
$104
Feature
To Order, Specify:
• Includes one full height side trim rail.
1) Product number.
Specification Tips
2) Trim color.
HREH
• For use with base panel and one add-on panel.
• For two high add-on panel applications specify separately
full-height side trim rail for base panel and one high add-on,
for two high add-on panel location use side trim rail that ships
with add-on panel. See Specification Guide for application
guidelines.
2371-6401
Panel Bridge
Features
To Order, Specify:
• Includes one panel bridge.
• Conceals top raceway between two top caps in a straight
panel configuration.
• Applicable to PLACES 2′′(51mm) thick panels only.
• For use with low profile steel top caps.
1) Product number.
$7
2) Trim color.
2371-6401
Hinges
HHE
Panel Height
Width
Number
Price
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
1 1/8′′(29mm)
HHE-0030
HHE-0037
HHE-0044
HHE-0050
HHE-0056
HHE-0064
HHE-0068
HHE-0082
$ 9
9
10
11
11
12
13
16
Features
To Order, Specify:
• Includes one hinge set for one side of trim rail.
• For replacement only (hinges are included with panels).
• One hinge set connects every two panels for angular
connections.
• Two hinge sets are used for straight-line conditions.
1) Product number.
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Trim color.
April 2008 / USA
141
UniGroup Too Price List
Panel Accessories
PLACES
Wall Track
Height
Depth
Width
Number
Price
60′′(1524mm)
72′′(1829mm)
84′′(213mm)
3/4′′(19mm)
5/8′′(16mm)
WT-60
WT-72
WT-84
$101
123
137
Features
To Order, Specify:
• Includes two wall tracks and mounting screws #10
2 1/2′′(64mm) long.
• For attachment of components to structural walls.
• See installation instructions for proper mounting.
1) Product number.
2) Trim color for screws.
3) Trim color for track.
Specification Tip
WT
Class AA
Wall Mount Kit
WMK
Class AA
• Not for use with up-mount overhead storage kit.
Panel Height
Depth
Number
Price
30′′(762mm)
35′′(889mm)& 37′′(940mm)
42′′(1067mm)& 44′′(1118mm)
48′′(1219mm)& 50′′(1219mm)
56′′(1422mm)
62′′(1575mm)& 64′′(1626mm)
66′′(1676mm)& 68′′(1727mm)
80′′(2032mm)& 82′′(2083mm)
1/4′′(6mm)
WMK-30
WMK-35
WMK-42
WMK-48
WMK-54
WMK-62
WMK-66
WMK-80
$ 54
64
71
79
88
102
107
130
Features
To Order, Specify:
• Includes wall-mount channel, hinges and screws.
• For mounting panels, with or without add-on panel, to a
structural wall.
• Adds 1/4′′(6mm) to the panel width.
1) Product number.
2) Trim color.
Specification Tip
• Must be properly anchored to a structural wall.
T-Mount Kit — Center and End
Conditions
HMKT
Class BA
30′′(762mm)
37′′(940mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
HMKT-0030
HMKT-0037
HMKT-0044
HMKT-0050
HMKT-0056
HMKT-0064
HMKT-0068
HMKT-0082
Features
To Order, Specify:
• Includes pre-drilled side rail, center-mount brackets,
end-mount brackets, light block extrusions, glide housing, and
screws.
• Brackets included for both center- and end-mount
T-conditions.
• Connects two panels in a T-condition. T-mount can attach to
a base panel and one fabric add-on panel. Configuration
coming off of a T-mount cannot contain add-on panels.
1) Product number.
Specification Tips
• Both panels in a T-mount condition must be of equal height.
• Cannot mount on glazed panels, glazed add-on panels or
doors.
• For use with PLACES panels only.
142
April 2008 / USA
SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Trim color.
$ 60
69
82
95
98
102
109
125
UniGroup Too Price List
Panel Accessories
PLACES
All-Purpose Hook
Actual
Height
Depth
Width
Number
Price
1′′(25mm)
3′′(76mm)
1/2′′(13mm)
HCH-0008
$87
Features
To Order, Specify:
• Includes eight hooks.
• Attaches to PLACES low profile steel top cap panels only.
1) Product number.
2) Trim color.
HCH-0008
All-Purpose Hook — For Low
Profile Wood Top Cap Panels
1′′(25mm)
3′′(76mm)
5/8′′(16mm)
HCH-0008-W
Features
To Order, Specify:
• Includes eight hooks.
• Attaches to PLACES low profile wood top cap panels only.
1) Product number.
$87
2) Trim color.
HCH-0008-W
Seismic Anchoring Bracket
HAB-0001
$125
Features
To Order, Specify:
• Includes package of six formed steel brackets.
• For seismic anchoring of UniGroup Too, UniGroup and
PLACES panels.
1) Product number.
(No finish specification required.)
HAB
Friction Pad
7031-0501
$6
Feature
To Order, Specify:
• Includes six pads.
1) Product number.
(No finish specification required.)
Specification Tip
• Attaches to bottom of glide to prevent movement of panels on
hard surface flooring.
7031-0501
2/90 Sign Systems
2/90 Sign Systems is a recommended signage program for use
with Haworth Systems. Signage options include ADA-compliant
panel-mounted name signs, department signs, building
directories, in/out boards, restroom and no smoking signs.
For inquiries, catalogs or orders, contact System 2/90 directly
at 1-800-777-4310, fax (616) 656-4300, P.O. Box 888289,
Grand Rapids, MI 49588-8289.
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
143
UniGroup Too Price List
Clerestory Kits
for use with UniGroup Too, UniGroup, PLACES
Clerestory Illustration
Planning and Specification
1. To determine how many lineal feet of straight track are needed, divide the total lineal feet of panels that
require Clerestory by ten and round-off to the next highest whole number. Order that quantity of Straight
Track SPCL-1616.
2. Examine your floor plan to determine the type and quantities of corner kits you will require.
Note that only 90В° angles are possible; other angles cannot be accommodated.
3. If mounting Clerestory on straight panel runs that include doors or glazed panels, a maximum
combination of four lineal feet of glazed panels or glazed panels with a door is permitted per
12′(3658mm) panel run.
4. Follow normal support and load values for UniGroup Too, UniGroup and PLACES panels as defined in
Haworth Installation Procedures.
5. Be sure that sprinkler, HVAC and lighting locations are taken into consideration when planning for
Clerestory; it does form a floor-to-ceiling barrier.
6. Consult Installation Instructions #7021-6201 for specific installation information.
NOTES:
- Installation instructions available on Source Book.
- Not to be used with top feed modules.
- Ceiling bracket designed to fit 1′′(25mm) grid.
- For UniGroup Too applications, 90В° finish posts must be replaced with UniGroup 90В° finish posts so
radius aesthetic matches 2-way corner pieces. Field cut to size.
- Installation of clerestory kits on PLACES panels will reduce the cabling capacity of the upper
panel raceway and restrict access.
Code Compliance
144
April 2008 / USA
Where Clerestory is used with UniGroup Too, UniGroup and PLACES panels that feature The Power
Base electrical system, electrical components do not comply with UL 183 requirements for floor-to-ceiling
partitions; the electrical components do comply with UL 1286 requirements for panel systems. Verify
acceptance of this exception and check local codes.
UniGroup Too Price List
Clerestory Kits
for use with UniGroup Too, UniGroup, PLACES
Application Guidelines
• Clerestory is designed to be used with 80′′(2032mm) or
82′′(2083mm) high UniGroup Too, UniGroup and PLACES
panels where there is a maximum ceiling height of
10′(3048mm), OR with 64′′(1626mm) or 68′′(1727mm)-high
panels where there is a maximum ceiling height of
9′(2743mm). Be sure that Clerestory complies with local
building codes before ordering and installing the product.
• All aluminum and plastic components (such as corner
moldings) are available color-matched to UniGroup Too,
UniGroup and PLACES panel trim colors. Not available
in Metallic finishes.
Straight Track Kit
Number
Price
SPCL-1616
$458
SPCL-1616
2-Way Connector Kit
• Note: Laminated safety glass is required for use
in all Clerestory applications; consult installation
instructions glass specification directions
(purchase all required glass locally).
• Minimum thickness of glass is 0.220′′(6mm).
• Maximum thickness of glass is 0.275′′(7mm).
Features
To Order, Specify:
• Includes two 10′(3048mm) lengths of extruded aluminum,
painted ceiling and panel track; two (2) 10′(3048mm) lengths
of ��H’’ spacer; extruded aluminum, painted vertical
connectors; four (4) couplers; and hardware.
• To determine the amount of lineal feet of straight track
needed, divide the total lineal feet of panels that require
Clerestory by 10 and round off to the next highest whole
number. Order that quantity of straight track.
1) Product number.
SPCL-1613
2) Trim color.
Vertical
$71
Features
To Order, Specify:
• Includes one 4′(1219mm) length of connector post and corner
moldings for panel and ceiling.
1) Product number.
2) Trim color.
Specification Tip
• Use with UniGroup or PLACES 90° finish posts only.
SPCL-1613
3-Way Connector Kit
SPCL-1614
Vertical
$78
Features
To Order, Specify:
• Includes one 4′(1219mm) length of connector post and corner
moldings for panel and ceiling.
1) Product number.
2) Trim color.
SPCL-1614
4-Way Connector Kit
SPCL-1615
Vertical
$86
Features
To Order, Specify:
• Includes one 4′(1219mm) length of connector post and corner
moldings for panel and ceiling.
1) Product number.
2) Trim color.
SPCL-1615
End Kit
SPCL-1622
Vertical
$43
Features
To Order, Specify:
• Includes one 4′(1219mm) length of end trim post and panel
end cap molding.
1) Product number.
2) Trim color.
SPCL-1622
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
145
UniGroup Too Price List
Electrical and Cable Management
Top Feed Modules for use with UniGroup Too
UniGroup Too
Top Feed Module — 3-Circuit
10′ Ceiling Height
Panel
Height
Pole
Length
Number
Price
32′′(813mm)
40′′(1016mm) - 56′′(1422mm)
64′′(1626mm) - 72′′(1829mm)
80′′(2032mm)
102′′(2591mm)
90′′(2286mm)
68′′(1727mm)
50′′(1270mm)
E2FM-2
E2FM-4
E2FM-6
E2FM-8
$366
352
341
334
Features
To Order, Specify:
• Includes pole, junction box with cover, ceiling bezel, plug
sub-assembly, and square painted top cap cover.
• Required when the building’s power source must be
accessed from the space above the ceiling and carried to the
base raceway.
• Refer to Specification Guide for cable management.
• 10′(3048mm) ceiling height limit.
1) Product number.
2) Trim color for pole. $14 upcharge (list) for
Metallic trim color.
3) Trim color top cap piece. $14 upcharge (list) for
Metallic trim color.
Specification Tips
• When specified, field modification of top cap is required.
• Not for use with power sources other than 120 volt 60
hertz.
• For use with UniGroup Too square painted top cap panels
only.
• Not for use with glazed add-on panels, glazed panels or
single doors.
E2FM
C
R
US
NOTE:
Wire harness length is
139 ′′(3531mm) regardless
of pole length.
UniGroup Too
Top Feed Module — 3-Circuit
12′ Ceiling Height
40′′(1016mm) - 80′′(2032mm)
124′′(3150mm)
Features
To Order, Specify:
• Includes pole, junction box with cover, ceiling bezel, plug
sub-assembly, and square painted top cap cover.
• Required when the building’s power source must be
accessed from the space above the ceiling and carried to the
base raceway.
• Refer to Specification Guide for cable management.
• 12′(3658mm) ceiling height limit.
1) Product number.
Specification Tips
• When specified, field modification of top cap is required.
• Not for use with power sources other than 120 volt 60
hertz.
• For use with UniGroup Too square painted top cap panels
only.
• Not for use with glazed add-on panels, glazed panels or
single doors.
E2FM-X
C
R
US
NOTE:
Wire harness length is
230 ′′(5842mm).
146
April 2008 / USA
E2FM-X
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
$673
2) Trim color for pole. $14 upcharge (list) for
Metallic trim color.
3) Trim color top cap piece. $14 upcharge (list) for
Metallic trim color.
UniGroup Too Price List
Electrical and Cable Management
Top Feed Modules for use with UniGroup Too
UniGroup Too
Top Feed Module — 6-Circuit
10′ Ceiling Height
Panel
Height
Panel
Width
Pole
Length
Number
Price
32′′(813mm)
32′′(813mm)
40′′(1016mm) - 56′′(1422mm)
40′′(1016mm) - 56′′(1422mm)
64′′(1626mm) - 72′′(1829mm)
80′′(2032mm)
30′′(762mm) - 36′′(914mm)
42′′(106716mm) - 60′′(1524mm)
30′′(762mm) - 36′′(914mm)
42′′(106716mm) - 60′′(1524mm)
All
All
102′′(2591mm)
102′′(2591mm)
90′′(2286mm)
90′′(2286mm)
68′′(1727mm)
50′′(1270mm)
E2FM-10-6
E2FM-12-6
E2FM-14-6
E2FM-16-6
E2FM-18-6
E2FM-20-6
$644
644
621
621
598
588
Features
To Order, Specify:
• Includes pole, junction box with cover, ceiling bezel, two plug
sub-assemblies, and square painted top cap cover.
• Required when the building’s power source must be
accessed from the space above the ceiling and carried to the
base raceway.
• 10′(3048mm) ceiling height limit.
1) Product number.
2) Trim color for pole. $14 upcharge (list) for
Metallic trim color.
3) Trim color top cap piece. $14 upcharge (list) for
Metallic trim color.
Specification Tips
E2FM-6
C
R
US
NOTE:
Wire harness length is
180 ′′(4572mm) regardless
of pole length.
• When specified, field modification of top cap is required.
• No cable capacity in 6-circuit top feed, power only.
• Not for use with power sources other than 120 volt 60
hertz.
• For installation on panels no less than 30′′(762mm) wide.
• For use with UniGroup Too square painted top cap panels
only.
• Not for use with glazed add-on panels, glazed panels or
single doors.
Class AC – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
147
UniGroup Too Price List
Electrical and Cable Management
Top Feed Modules for use with UniGroup
UniGroup
Top Feed Module — 3-Circuit
10′ Ceiling Height
Panel
Height
Pole
Length
Number
Price
44′′(1118mm) - 56′′(1422mm)
64′′(1626mm) - 68′′(1727mm)
82′′(2083mm)
90′′(2286mm)
68′′(1727mm)
50′′(1270mm)
TFM-4-B
TFM-6-B
TFM-8-B
$378
368
359
Features
To Order, Specify:
• Includes the pole, junction box with cover, ceiling bezel, plug
sub-assembly, and radius top cap cover.
• Required when the building’s power source must be
accessed from the space above the ceiling and carried to the
base raceway.
• Refer to Specification Guide for cable management.
• 10′(3048mm) ceiling height limit.
• When used with UniGroup radius steel top cap, field cutting of
top cap is required. When used with UniGroup radius wood
top cap, access hole must be cut into top cap.
1) Product number.
2) Trim color for pole.
3) Trim color for top cap piece.
Specification Tips
• When specified, field modification of top cap is required.
• Not for use with power sources other than 120 volt 60
hertz.
• For use with UniGroup panels only.
• Not for use with glazed add-on panels, glazed and open
frame panels or single doors.
TFM-B
C
R
US
NOTE:
Wire harness length is
139 ′′(3531mm) regardless
of pole length.
UniGroup
Top Feed Module — 3-Circuit
12′ Ceiling Height
37′′(940mm) - 82′′(2083mm)
124′′(3150mm)
Features
To Order, Specify:
• Includes the pole, junction box with cover, ceiling bezel, plug
sub-assembly, and radius top cap cover.
• Required when the building’s power source must be
accessed from the space above the ceiling and carried to the
base raceway.
• Refer to Specification Guide for cable management.
• 12′(3658mm) ceiling height limit.
• When used with UniGroup radius steel top cap, field cutting of
top cap is required. When used with UniGroup radius wood
top cap, access hole must be cut into top cap.
1) Product number.
Specification Tips
• When specified, field modification of top cap is required.
• Not for use with power sources other than 120 volt 60
hertz.
• For use with UniGroup panels only.
• Not for use with glazed add-on panels, glazed and open
frame panels or single doors.
TFM-X-B
C
R
US
NOTE:
Wire harness length is
230 ′′(5842mm).
148
April 2008 / USA
TFM-X-B
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Trim color for pole.
3) Trim color for top cap piece.
$717
UniGroup Too Price List
Electrical and Cable Management
Top Feed Modules for use with UniGroup
UniGroup
Top Feed Module — 6-Circuit
10′ Ceiling Height
Panel
Height
Panel
Width
Pole
Length
Number
Price
44′′(1118mm) - 56′′(1422mm)
44′′(1118mm) - 56′′(1422mm)
64′′(1626mm) - 68′′(1727mm)
82′′(2083mm)
30′′(762mm), 36′′(914mm)
42′′(1067mm), 48′′(1219mm), 60′′(1524mm)
All
All
90′′(2286mm)
90′′(2286mm)
68′′(1727mm)
50′′(1270mm)
TFM-14
TFM-16
TFM-18
TFM-20
$668
668
643
633
Features
To Order, Specify:
• Includes the pole, junction box with cover, ceiling bezel, two
plug sub-assemblies, and radius top cap cover.
• Required when the building’s power source must be
accessed from the space above the ceiling and carried to the
base raceway.
• For installation on panels no less than 30′′(762mm)-wide.
• 10′(3048mm) ceiling height limit.
• No cable capacity in 6-circuit top feed, power only.
• When used with UniGroup radius steel top cap, field cutting of
top cap is required. When used with UniGroup radius wood
top cap, access hole must be cut into top cap.
1) Product number.
2) Trim color for pole.
3) Trim color for top cap piece.
Specification Tips
TFM
C
R
US
• When specified, field modification of top cap is required.
• Not for use with power sources other than 120 volt 60
hertz.
• For use with UniGroup panels only.
• Not for use with glazed add-on panels, glazed and open
frame panels or single doors.
NOTE:
Wire harness length is
180 ′′(4572mm) regardless
of pole length.
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
149
UniGroup Too Price List
Electrical and Cable Management
Top Feed Modules for use with PLACES
PLACES
Top Feed Module — 3-Circuit
10′ Ceiling Height
Panel
Height
Pole
Length
Number
Price
44′′(1118mm) - 56′′(1422mm)
64′′(1626mm) - 68′′(1727mm)
82′′(2083mm)
90′′(2286mm)
68′′(1727mm)
50′′(1270mm)
HTFM-0004
HTFM-0006
HTFM-0008
$431
415
402
Features
To Order, Specify:
• Includes the pole, junction box with cover, ceiling bezel, wire
harness with plug, and low profile top cap cover.
• Required when the building’s power source must be
accessed from the space above the ceiling and carried to the
base raceway.
• Refer to Specification Guide for cable management.
• 10′(3048mm) ceiling height limit.
• When used with PLACES low profile steel top cap, field
cutting of top cap is required. When used with PLACES low
profile wood top cap, access hole must be cut into top cap.
1) Product number.
2) Trim color for pole.
3) Trim color for top cap piece.
Specification Tips
• When specified, field modification of top cap is required.
• Not for use with power sources other than 120 volt 60
hertz.
• For use with PLACES panels only.
• Not for use with glazed add-on panels, glazed and open
frame panels or single doors.
HTFM
C
R
US
NOTE:
Wire harness length is
139 ′′(3531mm) regardless
of pole length.
PLACES
Top Feed Module — 3-Circuit
12′ Ceiling Height
37′′(940mm) - 82′′(2083mm)
124′′(3150mm)
Features
To Order, Specify:
• Includes the pole, junction box with cover, ceiling bezel, wire
harness with plug, and low profile top cap cover.
• Required when the building’s power source must be
accessed from the space above the ceiling and carried to the
base raceway.
• Refer to Specification Guide for cable management.
• 12′(3658mm) ceiling height limit.
• When used with PLACES low profile steel top cap, field
cutting of top cap is required. When used with PLACES low
profile wood top cap, access hole must be cut into top cap.
1) Product number.
Specification Tips
• When specified, field modification of top cap is required.
• Not for use with power sources other than 120 volt 60
hertz.
• For use with PLACES panels only.
• Not for use with glazed add-on panels, glazed and open
frame panels or single doors.
HTFM-X
C
R
US
NOTE:
Wire harness length is
230 ′′(5842mm).
150
April 2008 / USA
HTFM-X
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Trim color for pole.
3) Trim color for top cap piece.
$803
UniGroup Too Price List
Electrical and Cable Management
Top Feed Modules for use with PLACES
PLACES
Top Feed Module — 6-Circuit
10′ Ceiling Height
Panel
Height
Panel
Width
Pole
Length
Number
Price
44′′(1118mm) - 56′′(1422mm)
44′′(1118mm) - 56′′(1422mm)
64′′(1626mm) - 68′′(1727mm)
82′′(2083mm)
30′′(762mm), 36′′(914mm)
42′′(1067mm), 48′′(1219mm)
All
All
90′′(2286mm)
90′′(2286mm)
68′′(1727mm)
50′′(1270mm)
HTFM-14
HTFM-16
HTFM-18
HTFM-20
$756
756
688
710
Features
To Order, Specify:
• Includes the pole, junction box with cover, ceiling bezel, wire
harness with plug, and low profile top cap cover.
• Required when the building’s power source must be
accessed from the space above the ceiling and carried to the
base raceway.
• For installation on panels no less than 30′′(762mm) wide.
• 10′(3048mm) ceiling height limit.
• No cable capacity in 6-circuit top feed, power only.
• When used with PLACES low profile steel top cap, field
cutting of top cap is required. When used with PLACES low
profile wood top cap, access hole must be cut into top cap.
1) Product number.
2) Trim color for pole.
3) Trim color for top cap piece.
Specification Tips
• When specified, field modification of top cap is required.
• Not for use with power sources other than 120 volt 60
hertz.
• For use with PLACES panels only.
• Not for use with glazed add-on panels, glazed and open
frame panels or single doors.
HTFM
C
R
US
NOTE:
Wire harness length is
180 ′′(4572mm) regardless
of pole length.
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
151
UniGroup Too Price List
Electrical and Cable Management
Cable Management Poles for use with UniGroup Too and UniGroup
UniGroup Too/UniGroup
Cable Management Pole —
One Channel
Number
Price
CMPF-1-BR
$401
Features
To Order, Specify:
• Includes communications pole with cover, base raceway
cover and ceiling bezel plate.
• Interface with the base raceway cover.
• Provides a means of vertically routing and accessing
communications cabling within the panel’s base raceway.
• May be used in 90°, 2-way (in-line), 3-way or 4-way panel
conditions.
• For use up to 10′(3048mm) ceiling height.
• Refer to Specification Guide for cable management.
1) Product number.
2) Trim color for raceway cover. $14 upcharge
(list) for Metallic trim color.
3) Trim color for pole. $14 upcharge (list) for
Metallic trim color.
Specification Tips
• Cannot be used in conjunction with finish posts.
• For use with UniGroup Too and UniGroup.
CMPF-1-BR
UniGroup Too/UniGroup
Cable Management Pole —
Two Channels
CMPT-1-B
$427
Features
To Order, Specify:
• Includes communications pole with covers, base raceway
covers and ceiling bezel plate.
• Provides cabling capacity with two integral channels.
• May be used as a 2-way in-line panel filler.
• Interior of 2′′(51mm)-wide pole is separated by a metal
divider, which separates communication cables in each
compartment.
• For use up to 10′(3048mm) ceiling height.
1) Product number.
Specification Tips
• Use straight span connector to bypass electrical distribution.
• Cannot be used in conjunction with finish posts.
• For use with UniGroup Too and UniGroup.
CMPT-1-B
152
April 2008 / USA
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Trim color for raceway cover. $14 upcharge
(list) for Metallic trim color.
3) Trim color for pole. $14 upcharge (list) for
Metallic trim color.
UniGroup Too Price List
Electrical and Cable Management
Cable Management Poles for use with PLACES
PLACES
Cable Management Pole —
Panel Height
HCPA
(2-Way)
HCPS
(3-Way)
Height
Width
Description
Number
Price
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
2′′(51mm)
For 2-way 90В° panel condition
2′′(51mm)
For 3-way panel condition
HCPA-0044
HCPA-0050
HCPA-0056
HCPA-0064
HCPA-0068
HCPA-0082
HCPS-0044
HCPS-0050
HCPS-0056
HCPS-0064
HCPS-0068
HCPS-0082
$279
286
290
293
299
305
$279
286
290
293
299
305
Features
To Order, Specify:
• Includes communications pole with cover, base raceway
cover and top cap.
• Vertically routes communications cabling.
• Use in 2-way or 3-way panel conditions.
• In a 4-way condition, use cover as the fourth cable exit
location.
• 10′(3048mm) ceiling height limit.
• Poles feature openings to match the panel’s top raceway for
continuous cable routing.
• Attaches to panel side trim rails.
• Refer to Specification Guide for cable management.
1) Product number.
2) Trim color.
3) Trim color for raceway cover.
Specification Tips
• Cannot be used in conjunction with finish posts.
• For use with PLACES.
PLACES
Cable Management Pole —
For 10′(3048mm)-High Ceiling
HCPA
(2-Way)
HCPS
(3-Way)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
2′′(51mm)
For 2-way 90В° panel condition
2′′(51mm)
For 3-way panel condition
2′′(51mm)
For end-of-run panel condition
HCPA-1044
HCPA-1050
HCPA-1056
HCPA-1064
HCPA-1068
HCPA-1082
HCPS-1044
HCPS-1050
HCPS-1056
HCPS-1064
HCPS-1068
HCPS-1082
HCPE-1044
HCPE-1050
HCPE-1056
HCPE-1064
HCPE-1068
HCPE-1082
Features
To Order, Specify:
• Includes communications pole with covers, base raceway
covers and ceiling bezel plate.
• Vertically routes communications cabling.
• Use in 2-way, 3-way, or end-of-run panel conditions (floor to
ceiling only).
• In a 4-way condition, use cover as the fourth cable exit
location.
• 10′(3048mm) ceiling height limit.
• Poles feature openings to match the panel’s top raceway for
continuous cable routing.
• Attaches to panel side trim rails.
• Refer to Specification Guide for cable management.
1) Product number.
$279
286
290
293
299
305
$279
286
290
293
299
305
$272
280
285
288
293
299
2) Trim color.
3) Trim color for raceway cover.
Specification Tips
• Cannot be used in conjunction with finish posts.
• For use with PLACES.
HCPE
(End-of-run)
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
153
UniGroup Too Price List
Electrical and Cable Management
Cable Management Poles for use with PLACES
PLACES
Cable Management Pole —
For 12′(3658mm)-High Ceiling
HCPA
(2-Way)
HCPS
(3-Way)
HCPE
(End-of-run)
Height
Width
Description
Number
Price
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
44′′(1118mm)
50′′(1270mm)
56′′(1422mm)
64′′(1626mm)
68′′(1727mm)
82′′(2083mm)
2′′(51mm)
For 2-way 90В° panel condition
2′′(51mm)
For 3-way panel condition
2′′(51mm)
For end-of-run panel condition
HCPA-1244
HCPA-1250
HCPA-1256
HCPA-1264
HCPA-1268
HCPA-1282
HCPS-1244
HCPS-1250
HCPS-1256
HCPS-1264
HCPS-1268
HCPS-1282
HCPE-1244
HCPE-1250
HCPE-1256
HCPE-1264
HCPE-1268
HCPE-1282
$315
321
326
329
334
343
$315
321
326
329
334
343
$308
315
320
323
329
334
Features
To Order, Specify:
• Includes communications pole with covers, base raceway
covers and ceiling bezel plate.
• Vertically routes communications cabling.
• Use in 2-way, 3-way, or end-of-run panel conditions (floor to
ceiling only).
• In a 4-way condition, use cover as the fourth cable exit
location.
• 12′(3658mm) ceiling height limit.
• Poles feature openings to match the panel’s top raceway for
continuous cable routing.
• Refer to Specification Guide for cable management.
1) Product number.
Specification Tips
• Cannot be used in conjunction with finish posts.
• Attaches to panel side trim rails.
• For use with PLACES.
154
April 2008 / USA
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Trim color.
3) Trim color for raceway cover.
UniGroup Too Price List
Electrical and Cable Management
Cable Management Posts for use with PLACES
PLACES
Cable Management Post —
Variable Height — Three-Way
180° — Fabric or Painted
Surface
Height
Width
24′′(610mm)
52′′(1321mm)
2′′(51mm)
Fabric
Number
Painted
Number
Price
HSCP-0024-F1
HSCP-0052-F1
HSCP-0024-V1
HSCP-0052-V1
$139
198
Features
To Order, Specify:
• Includes post, low profile top cap and replacement low profile
top cap for finish post.
• For three-way, 180° panel configurations.
• Use when taller panel meets lower panels in a straight-run
condition and panel-top cable storage is required to continue
along panel runs.
• Field cut to appropriate length.
1) Product number.
2) Fabric or painted surface color.
3) Trim color.
Specification Tip
• For use with PLACES.
HSCP-F1
HSCP-V1
PLACES
Cable Management Post —
Variable Height — Two-Way 90°
— Fabric or Painted Surface
24′′(610mm)
52′′(1321mm)
2′′(51mm)
HSCP-0024-F2
HSCP-0052-F2
HSCP-0024-V2
HSCP-0052-V2
Features
To Order, Specify:
• Includes post, low profile top cap and replacement low profile
top cap for finish post.
• For 90° panel configuration applications only.
• Use when panels of two different heights meet and cable
storage is required to continue along top of panel run.
• Field cut to appropriate length.
1) Product number.
$139
198
2) Fabric or painted surface color.
3) Trim color.
Specification Tip
• For use with PLACES.
HSCP-F2
HSCP-V2
PLACES
Cable Management Post —
Variable Height — In-Line —
Fabric or Painted Surface
24′′(610mm)
52′′(1321mm)
2′′(51mm)
HSCP-0024-F3
HSCP-0052-F3
HSCP-0024-V3
HSCP-0052-V3
Features
To Order, Specify:
• Includes post, low profile cap and lower panel end cap.
• For straight-line panel configurations.
• Use when panels of two different heights meet and panel-top
cable storage is required to continue along panel run.
• Requires field modification of lower straight panel top cap.
• Field cut to appropriate length.
1) Product number.
$139
198
2) Fabric or painted surface color.
3) Trim color.
Specification Tip
• For use with PLACES.
HSCP-F3
HSCP-V3
PLACES
Cable Management Post —
Variable Height — Three-Way
90° — Fabric or Painted Surface
24′′(610mm)
52′′(1321mm)
2′′(51mm)
HCCP-0024-F4
HCCP-0052-F4
HCCP-0024-V4
HCCP-0052-V4
Features
To Order, Specify:
• Includes post, low profile top cap and replacement for low
profile top cap finish post.
• For 90° panel configuration applications only.
• Use when equal-height panels at 90° meet lower-height panel
and cable storage is required to continue along top of panel
run.
• Field cut to appropriate length.
1) Product number.
$163
232
2) Fabric or painted surface color.
3) Trim color.
Specification Tip
• For use with PLACES.
HCCP-F4
HCCP-V4
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
155
UniGroup Too Price List
Electrical and Cable Management
Base Feed Modules for use with UniGroup Too, UniGroup, PLACES
Length
UniGroup Too, UniGroup and
PLACES Base Feed Module —
Hardwire Connection —
3-Circuit
BFM-1-B
Description
48′′(1219mm)
Number
Price
BFM-1-B
$174
Features
To Order, Specify:
• Includes a three-circuit power connector, four feet of
liquid-tight, 1/2′′(13mm) flexible conduit, and eight 12-gauge
lead wires.
• For floor, column, or wall, hardwire connections to fixed
power installations.
• Attaches at any one of four receptacle sites in a powered
base raceway.
• Standard in charcoal finish color only.
• Not for use with power sources other than 120 volt 60
hertz.
1) Product number.
(No finish specification required.)
Specification Tip
• For use with UniGroup Too, UniGroup and PLACES.
C
R
US
UniGroup Too, UniGroup and
PLACES Raised Floor Base
Feed Module — 3-Circuit
BFM-8-B
C
R
US
69′′(1753mm)
Infeed Connector
BFM-8-B
Features
To Order, Specify:
• Includes one base feed with 69′′(1753mm) long, black
vinyl-covered 1/2′′(13mm) flexible conduit with eight
12-gauge lead wires for up to three 20-amp circuits of power.
• Allows quick connect between UniGroup
Too/UniGroup/PLACES and Haworth 3•3•2 underfloor
modular wiring system.
• Base feed module can be field modified to accommodate left
or right conditions.
• Attaches at any one of the four receptacle sites in a powered
raceway of a standard or base panel.
• Standard in charcoal trim color connector with black vinyl
conduit cover only.
• For 6-circuit applications order quantity of two.
1) Product number.
(No finish specification required.)
$292
Specification Tip
• For use with UniGroup Too, UniGroup and PLACES.
UniGroup Too, UniGroup and
PLACES Base Feed Module —
Plug Connection — 1-Circuit
BFM-2-B
C
R
US
24′′(610mm)
BFM-2-B
Features
To Order, Specify:
• Includes one-circuit power connector, two-foot cord, and 20
amp plug.
• Requires a 20 amp, 125 volt power receptacle for plug-in
(not included).
• Attaches at any one of four receptacle sites in a powered
base raceway.
• Supplies power to circuit one only.
• Not for use in Canada.
• Not for use with isolated ground receptacles.
• Not for use with power sources other than 120 volt 60
hertz.
1) Product number.
(No finish specification required.)
$187
Specification Tip
• For use with UniGroup Too, UniGroup and PLACES.
6′(1829mm)
UniGroup Too, UniGroup and
PLACES Base Feed Module
Features
(Canada) — Plug Connection — • Includes one-circuit power connector, 6′(1829mm) cord, and
1-Circuit
a 15 amp plug.
• Not for use in U.S.A. due to electrical code restrictions.
• Meets CSA C22.2 No. 203-M91 requirements
• Requires a 15 amp, 125 volt power receptacle for plug-in (not
included).
• Attaches at any one of four receptacle sites in a powered
base raceway.
• Supplies power to one circuit only.
• Not for use with isolated ground receptacles.
• Not for use with power sources other than 120 volt 60 hertz.
BFM-2-A
Specification Tip
C
R
156
US
• For use with UniGroup Too, UniGroup, and PLACES.
April 2008 / USA
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
BFM-2-A
To Order, Specify:
1) Product number.
(No finish specification required.)
$180
UniGroup Too Price List
Electrical and Cable Management
Base Feed Modules for use with UniGroup Too, UniGroup, PLACES
Base Feed Module — Hardwire
Connection — 6-Circuit
BFM-1-6
C
R
US
Length
Number
Price
72′′(1829mm)
BFM-1-6
$308
Features
To Order, Specify:
• Includes a 6-circuit power connector, six feet of liquid-tight,
1′′(25mm) flexible conduit, and 14 12-gauge lead wires.
• For floor, column, or wall, hardwire connections to fixed
power installations.
• For installation on panels no less than 30′′(762mm) wide.
• Standard in charcoal finish color only.
• Not for use with power sources other than 120 volt 60
hertz.
1) Product number.
(No finish specification required.)
Specification Tips
• Requires field modification of base raceway cover.
• For use with UniGroup Too, UniGroup and PLACES.
Base Feed Module — Concealed
Hardwire Connection —
Features
3-Circuit
• Includes box with knockouts, 8 12-gauge lead wires and
attachment hardware.
• For floor, column, or wall, concealed hardwire connections to
fixed power installations.
• For installation on panels no less than 36′′(914mm) wide.
• Conforms to New York City building code.
• Not for use with power sources other than 120 volt 60
hertz.
BFM-6-B
$183
To Order, Specify:
1) Product number.
(No finish specification required.)
Specification Tip
• For use with UniGroup Too, UniGroup and PLACES.
BFM-6-B
C
R
US
Base Feed Module — Concealed
Flatwire Connection — 3-Circuit
BFM-15-B
$230
Features
To Order, Specify:
• Includes box with strain relief plate, 8 12-gauge lead wires
and attachment hardware.
• For floor, column, or wall, concealed flatwire connections to
fixed power installations.
• For installation on panels no less than 36′′(914mm) wide.
• Not for use with power sources other than 120 volt 60
hertz.
1) Product number.
(No finish specification required.)
Specification Tip
• For use with UniGroup Too, UniGroup and PLACES.
BFM-15-B
C
R
US
Base Feed Module — Concealed
Hardwire Connection —
Features
6-Circuit
• Includes box with knockouts, 14 12-gauge lead wires and
attachment hardware.
• For floor, column, or wall hardwire connections to fixed power
installations.
• For installation on panels no less than 42′′(1067mm) wide.
• Conforms to New York City building code.
• Not for use with power sources other than 120 volt 60
hertz.
R
$331
1) Product number.
(No finish specification required.)
Specification Tip
BFM-6-6
C
BFM-6-6
To Order, Specify:
• For use with UniGroup Too, UniGroup and PLACES.
US
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
157
UniGroup Too Price List
Electrical and Cable Management
Power Receptacles for use with UniGroup Too, UniGroup, PLACES
Power Receptacles
PRD-3-B
PRDI-5-B
R
IG
PRS-2-B
C
R
PRSI-2-B
US
Quantity
Description
Number
Price
Six(6)
Six (6)
Six (6)
Six(6)
Duplex
IGR Duplex
Single (20 amp)
IGR Single (20 amp)
PRD-3-B
PRDI-5-B
PRS-2-B
PRSI-2-B
$125
132
511
511
Features
To Order, Specify:
• Color-coded circuit selector for on-site programming to any
one of three circuits available.
• [PRD-3-B] Duplex 15-amp outlet accepts two plugs.
• [PRDI-5-B] Duplex 15-amp outlet with an isolated ground.
• [PRS-2-B] Single 20-amp outlet accepts one plug.
• [PRDI-5-B] not for use with cord-fed base feed BFM-2-B.
• [PRSI-2-B] Single 20-amp outlet with an isolated ground.
Accepts one plug.
• 20-amp outlet face standard in charcoal finish color only.
• Not for use with power sources other than 120 volt 60
hertz.
1) Product number.
Specification Tip
• For use with UniGroup Too, UniGroup and PLACES.
158
April 2008 / USA
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Trim color (for PRD and PRDI only).
UniGroup Too Price List
Electrical and Cable Management
Raceway Retrofit Kits for use with UniGroup Too, UniGroup, PLACES
Actual
Height
Raceway Retrofit Kits —
3-Circuit
4′′(102mm)
RKN-B (Non-Powered)
RKP-B (Powered)
C
R
US
Panel Width
Non-Powered
Number
Price
Powered
Number
Price
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
RKN-18-B
RKN-2-B
RKN-30-B
RKN-3-B
RKN-42-B
RKN-4-B
RKN-54-B
RKN-5-B
$103
103
103
103
103
103
103
103
RKP-18-B
RKP-2-B
RKP-30-B
RKP-3-B
RKP-42-B
RKP-4-B
RKP-54-B
RKP-5-B
$251
251
251
251
251
251
251
251
Features
To Order, Specify:
• Convert powered panels to non-powered panels or
non-powered panels to powered panels.
• Price of straight powered raceway kits includes one power
distribution assembly, powered raceway cover, and flexible
power connector.
• Not for use with power sources other than 120 volt 60
hertz.
1) Product number.
2) Trim color. $14 upcharge (list) for Metallic trim
color.
Specification Tip
• For use with UniGroup Too, UniGroup and PLACES.
Class AA
Raceway Retrofit Kits —
Powered — 6-Circuit
4′′(102mm)
RKP-6 (6-Circuit Powered)
Features
To Order, Specify:
• Convert non-powered panels to powered panels.
• Price of straight powered raceway kits includes one power
distribution assembly, powered raceway cover, and flexible
power connector.
• Not for use with power sources other than 120 volt 60
hertz.
1) Product number.
C
R
US
Class AA
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
RKP-2-6
RKP-30-6
RKP-3-6
RKP-42-6
RKP-4-6
RKP-54-6
RKP-5-6
$380
380
380
380
380
380
380
2) Trim color. $14 upcharge (list) for Metallic trim
color.
Specification Tip
• For use with UniGroup Too, UniGroup and PLACES.
Power Breaker Marker
NEP-1
Class FA
Quantity
Number
Price
Fifty(50)
NEP-1
$116
Features
To Order, Specify:
• Use in pairs at adjoining power distribution assemblies in the
flex connector sites to prevent improper electrical
connections.
• Refer to the 6-Circuit Power Base planning guide for details.
• Available in standard finish color only.
1) Product number.
(No finish specification required.)
Specification Tip
• For use with UniGroup Too, UniGroup and PLACES.
SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
159
UniGroup Too Price List
Electrical and Cable Management
Ported Raceway Covers for use with UniGroup Too, UniGroup, PLACES
Ported Raceway Covers
PRCN-B (Non-Powered Condition)
Width
Description
18′′(457mm)
One information plate
opening, one side
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
18′′(457mm)
PRCN-B (Non-Powered Condition)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
30′′(762mm)
PRCP-B (3-Circuit Powered Condition)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
30′′(762mm)
PRCP-B (3-Circuit Powered Condition)
PRCN-B (Non-Powered Condition)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
42′′(1067mm)
PRCP-B (3-Circuit Powered Condition)
One information plate
opening, each side
Two information plate
openings, one side
Two information plate
openings, each side
One standard wall outlet
opening, one side
One standard wall outlet
opening, each side
48′′(1219mm)
60′′(1524mm)
Price
3-Circuit
Powered
Number
Price
6-Circuit
Powered
Number
$ 63
PRCP-1118-B
$ 63
NA
PRCN-1124-B
PRCN-1130-B
PRCN-1136-B
PRCN-1142-B
PRCN-1148-B
PRCN-1154-B
PRCN-1160-B
PRCN-1218-B
69
72
80
83
86
95
97
$ 72
PRCP-1124-B
PRCP-1130-B
PRCP-1136-B
PRCP-1142-B
PRCP-1148-B
PRCP-1154-B
PRCP-1160-B
PRCP-1218-B
69
72
80
83
86
95
97
$ 72
PRCP-1124-6
PRCP-1130-6
PRCP-1136-6
PRCP-1142-6
PRCP-1148-6
PRCP-1154-6
PRCP-1160-6
NA
$ 69
72
80
83
86
95
97
NA
PRCN-1224-B
PRCN-1230-B
PRCN-1236-B
PRCN-1242-B
PRCN-1248-B
PRCN-1254-B
PRCN-1260-B
PRCN-2130-B
77
82
86
93
97
104
107
$ 82
PRCP-1224-B
PRCP-1230-B
PRCP-1236-B
PRCP-1242-B
PRCP-1248-B
PRCP-1254-B
PRCP-1260-B
PRCP-2130-B
77
82
86
93
97
104
107
$ 82
PRCP-1224-6
PRCP-1230-6
PRCP-1236-6
PRCP-1242-6
PRCP-1248-6
PRCP-1254-6
PRCP-1260-6
PRCP-2130-6
$ 77
82
86
93
97
104
107
$ 82
PRCN-2136-B
PRCN-2142-B
PRCN-2148-B
PRCN-2154-B
PRCN-2160-B
PRCN-2230-B
86
93
97
103
107
$ 92
PRCP-2136-B
PRCP-2142-B
PRCP-2148-B
PRCP-2154-B
PRCP-2160-B
PRCP-2230-B
86
93
97
103
107
$ 92
PRCP-2136-6
PRCP-2142-6
PRCP-2148-6
PRCP-2154-6
PRCP-2160-6
PRCP-2230-6
86
93
97
103
107
$ 92
PRCN-2236-B
PRCN-2242-B
PRCN-2248-B
PRCN-2254-B
PRCN-2260-B
PRCN-0142-B
97
103
107
112
116
$ 83
PRCP-2236-B
PRCP-2242-B
PRCP-2248-B
PRCP-2254-B
PRCP-2260-B
PRCP-0142-B
97
103
107
112
116
$ 83
PRCP-2236-6
PRCP-2242-6
PRCP-2248-6
PRCP-2254-6
PRCP-2260-6
97
103
107
112
116
PRCN-0148-B
PRCN-0160-B
PRCN-0242-B
90
97
$ 93
PRCP-0148-B
PRCP-0160-B
PRCP-0242-B
90
97
$ 93
PRCN-0248-B
PRCN-0260-B
97
107
PRCP-0248-B
PRCP-0260-B
97
107
Non-Powered
Number
PRCN-1118-B
Features
Price
NA
To Order, Specify:
• Retrofit to UniGroup Too, UniGroup and PLACES panel.
1) Product number.
• Ported raceway covers enable communications equipment cabling to
2) Trim color. $14 upcharge (list) for Metallic trim
be routed to connector modules located on the faces of the base
color.
raceway covers. Six variations are available to accommodate the
following connector modules: one information plate opening centered
on one side of the raceway cover; one information plate opening
centered on each side of the raceway cover; two information plate
openings on one side; two information plate openings on each side;
one standard wall outlet opening centered on one side; and one
standard wall outlet opening centered on each side.
• Information plate opening measures 1.38′′(35mm) high x 2.7′′(69mm)
wide.
• Standard wall outlet opening measures 2.25′′(57mm) high x
3.75′′(95mm) wide.
• Openings for information plates and standard wall outlets do not
include covers.
Specification Tips
• Specify when no raceway cover is ordered (option -E).
• Not for use with power sources other than 120 volt 60
hertz.
• For use with UniGroup Too, UniGroup and PLACES.
160
April 2008 / USA
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Electrical and Cable Management
Chicago Raceway Kits / Receptacles / Base Feed Module for use with UniGroup Too, UniGroup, PLACES
Height
Dual Power Access Raceway Kit 4′′(102mm)
— 4′′-High Base Raceway
RKP-C
C
R
US
Width
Trim Finish
Number
Price
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
RKP-18-C
RKP-2-C
RKP-30-C
RKP-3-C
RKP-42-C
RKP-4-C
RKP-54-C
RKP-5-C
$267
267
267
267
267
267
267
267
Features
To Order, Specify:
• Includes straight and flexible conduit, metal connectors,
including 90В° for junctioning, and raceway cover.
• Specify receptacles separately.
• Two electrical boxes used for junctioning or accepting
receptacles.
1) Product number.
2) Trim color.
Specification Tip
• For use with UniGroup Too, UniGroup and PLACES.
Power Receptacle — Duplex
Number
Price
PRD-1-C
PRD-1-C
C
R
US
Power Receptacle —
Isolated Ground Duplex
PRDI-1-C
C
R
$75
Features
To Order, Specify:
• Includes one receptacle.
• Standard in black finish color only.
1) Product number.
(No finish specification required.)
Specification Tip
• For use with UniGroup Too, UniGroup and PLACES.
PRDI-1-C
$110
Features
To Order, Specify:
• Includes one receptacle.
• Standard in orange finish color only.
1) Product number.
(No finish specification required.)
Specification Tip
• For use with UniGroup Too, UniGroup and PLACES.
US
/
Base Feed Module
BFM-1-C
C
R
US
Number
Price
BFM-1-C
$124
Features
To Order, Specify:
• Includes 48′′(1219mm) of vinyl-covered, 1/2′′(13mm) flexible
conduit, metal elbow hardware, and metal cover plate with
attachment hardware.
• Standard in charcoal finish color only.
• This product may be used in any Haworth UniGroup electrical
installation in Chicago.
1) Product number.
(No finish specification required.)
Specification Tip
• For use with UniGroup Too, UniGroup and PLACES.
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
161
UniGroup Too Price List
Electrical and Cable Management
Chicago Hardwire / International Top Feed Modules for use with UniGroup Too, UniGroup, PLACES
UniGroup Too,
UniGroup, PLACES
Chicago Hardwire / International
Top Feed Module
E2FM-PL
Panel Height
Pole
Length
Number
Price
30′′(762mm) - 32′′(813mm)
37′′(940mm) - 56′′(1422mm)
64′′(1626mm) - 72′′(1829mm)
80′′(2032mm) - 82′′(2083mm)
102′′(2591mm)
90′′(2286mm)
68′′(1727mm)
50′′(1270mm)
E2FM-22-PL
E2FM-24-PL
E2FM-26-PL
E2FM-28-PL
$321
310
299
288
Features
To Order, Specify:
• Includes raceway, junction box with cover, ceiling bezel and
top cap covers for UniGroup Too, UniGroup and PLACES.
• For use with Chicago Hardwire applications and with 4 meter
Power Logic cord, ordered separately from Power Logic.
• Required when the building’s power source must be
accessed from the ceiling plenum and routed to the base
raceway.
• Refer to Specification Guide for cable management.
• For use with ceilings up to 10′(3048mm) high.
• When used with steel top cap, field cutting of top cap is
required. When used with wood top caps, access hole must
be cut into top cap.
1) Product number.
2) Trim color. $14 upcharge (list) for Metallic trim
color.
3) Trim color for top cap piece. $14 upcharge (list)
for Metallic trim color.
Specification Tips
• Use to feed Power Logic receptacles or Chicago Hardwire
Raceway installed in the base raceway of the panel.
• For Chicago Hardwire applications, conduit must be field
supplied.
• Not for use with glazed add-on panels, glazed and open
frame panels or single doors.
International Power
Components
For power applications outside North America we recommend the use of Power Logic soft wiring components. Power
Logic offers a system of single circuit power cords and receptacle modules that fit into our non-powered base raceway.
Receptacle modules are offered with two sockets (3 and 4 socket versions also available). Each receptacle module has
sockets, switches and fuses that are appropriate for each country around the world. Contact the Power Logic regional
sales office in your area to help with planning details to assure local electrical code compliance. Contact Power Logic via
the Haworth/Power Logic website, (www.haworth.com/powerlogic), or through their corporate offices in Cape Town, South
Africa at 27-21-704-1450. Power Logic also offers power solutions for desktop, conference table or freestanding power
applications.
Power Entry Cord
162
April 2008 / USA
Cord
Receptacle
Class AC
Canadian Conversion Factor: Refer to haworth.com/Canada
Splitter
UniGroup Too Price List
Electrical and Cable Management
Power Connectors for use with UniGroup Too, UniGroup, PLACES
Number
Price
Straight-Span Power Connector PCSS-3-B
PCSS-3-B
C
R
US
$91
Features
To Order, Specify:
• Continues power along a straight panel run intersected by
non-powered panel(s) configured in a three- or four-way
configuration resulting in a 2′′(51mm) gap.
• Retaining clips attached.
• Ordered separately.
• Finish post or power connector cover is required by UL for
covering straight-span power connector.
• 2′′(51mm) longer than flexible connector listed below.
• Standard in charcoal finish color only.
• Not for use with power sources other than 120 volt 60
hertz.
1) Product number.
(No finish specification required.)
Specification Tip
• For use with UniGroup Too, UniGroup and PLACES.
Flexible Power Connector
PCF-3-B
C
R
US
PCF-3-B
$93
Features
To Order, Specify:
• Completes electrical circuit between adjacent powered panels
in straight or angled conditions.
• Finish post or power connector cover is required by UL for
covering flexible power connector.
• Retaining clips attached. Note: 0.95 flexible power connector
is shipped with each powered panel.
• Standard in charcoal finish color only.
• Not for use with power sources other than 120 volt 60
hertz.
1) Product number.
(No finish specification required.)
Specification Tip
• For use with UniGroup Too, UniGroup and PLACES.
Connector Assembly — 12′′
Pass-Through
PCOF-1-B
$95
Features
To Order, Specify:
• 12′′(305mm) panel pass-through.
• Price includes flexible power connector only.
1) Product number.
(No finish specification required.)
Specification Tip
• For use with UniGroup Too, UniGroup and PLACES.
PCOF-1-B
C
R
US
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
163
UniGroup Too Price List
Electrical and Cable Management
Extended Power Connectors for use with UniGroup Too, UniGroup, PLACES
Extended Power Connector —
Short Width
Straight Span Condition
PCE-BS
C
R
Panel
Width
Number
Price
18′′(457mm)
PCE-18-BS
$99
Features
To Order, Specify:
• Spans power through one or more non-powered panel(s)
located between powered panels.
• Extended power connectors cannot be coupled together.
• The above product numbers are used in straight span
conditions only.
• Standard in charcoal finish color only.
• Not for use with power sources other than 120 volt 60
hertz.
1) Product number.
(No finish specification required.)
Specification Tip
• For use with UniGroup Too, UniGroup and PLACES.
US
Extended Power Connector —
Medium Width
90В° Condition
12′′(305mm)
18′′(457mm)
PCE-12-BM
PCE-18-BM
$99
99
Features
To Order, Specify:
• Spans power through one or more non-powered panel(s)
located between powered panels.
• Extended power connectors cannot be coupled together.
• The above product numbers are used in 90° and 3-way
conditions only.
• Standard in charcoal finish color only.
• Not for use with power sources other than 120 volt 60
hertz.
1) Product number.
(No finish specification required.)
Specification Tip
• For use with UniGroup Too, UniGroup and PLACES.
3-Way Condition
PCE-BM
C
R
US
Extended Power Connector —
Long Width
U Condition
Z Condition
12′′(305mm)
18′′(457mm)
PCE-12-BL
PCE-18-BL
Features
To Order, Specify:
• Spans power through one or more non-powered panel(s)
located between powered panels.
• Extended power connectors cannot be coupled together.
• The above product numbers are used in Z and U conditions;
or where the PCE must make a 90В° turn and span a 3-way
intersection.
• Standard in charcoal finish color only.
• Not for use with power sources other than 120 volt 60
hertz.
1) Product number.
(No finish specification required.)
Specification Tip
• For use with UniGroup Too, UniGroup and PLACES.
90В° and 3-Way Condition
PCE-BL
C
R
164
US
April 2008 / USA
$99
99
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Electrical and Cable Management
End Cap / Communication Junction Box for use with UniGroup Too, UniGroup, PLACES
Base Raceway End Cap
Height
Number
Price
4′′(102mm)
EC-10-B
$18
Features
To Order, Specify:
• Includes ten end caps.
• For use at base raceway for end-of-run panel condition.
1) Product number.
Note: .6 end caps included with every panel.
Order additional as necessary.
2) Trim color. $14 upcharge (list) for Metallic trim
color.
EC-10-B
Communication Junction Box
CJB-1
Height
Length
Width
Number
Price
2′′(51mm)
4 1/4′′(108mm)
4 1/4′′(108mm)
CJB-1
$42
Features
To Order, Specify:
• Includes one junction box.
• Specify when the space above the ceiling is part of the
building’s ventilation system and required by local code
authority.
1) Product number.
(No finish specification required.)
Specification Tip
• For use with UniGroup Too, UniGroup and PLACES.
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
165
UniGroup Too Price List
Electrical and Cable Management
Vertical Wire Managers for use with UniGroup Too, UniGroup, PLACES
Vertical Wire Manager
Height
Inside Diameter
Number
Price
17 1/2′′(444mm)
7/16′′(11mm)
WC-17
$81
Features
To Order, Specify:
• Includes ten vertical wire managers.
• Vertically routes and conceals cords along panel surface
above or below the worksurface.
• Wire manager extends 1/2′′(13mm) from panel surface.
• Standard in black finish only.
1) Product number.
(No finish specification required.)
Specification Tips
WC-17
• Suggested application: use to conceal single task light cord
between overhead storage and worksurface.
• May be field cut to appropriate size.
• Panel side rails will not accommodate multiple components in
the same location.
• For use with UniGroup Too, UniGroup and PLACES.
Vertical Wire Channel
Height
Width
Depth
Number
Price
72′′(1829mm)
3/4′′(19mm)
3/4′′(19mm)
WC-6
$21
Features
To Order, Specify:
•
•
•
•
1) Product number.
Includes field-cuttable channel.
Guides wires or cables vertically.
Inserts into the panel side rail reveals.
Not available for use in the city of Los Angeles.
WC-6
Specification Tip
• For use with UniGroup Too, UniGroup and PLACES.
166
April 2008 / USA
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Trim color.
UniGroup Too Price List
Electrical and Cable Management
Expanded Top Caps for use with UniGroup
Width
Number
Price
Expanded Top Cap Raceway
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
ETCR-12
ETCR-18
ETCR-24
ETCR-30
ETCR-36
ETCR-42
ETCR-48
ETCR-60
$ 81
86
96
100
105
111
118
128
ETCR
Features
To Order, Specify:
• Includes channel and top cap.
• Refer to specification guide for cable management.
• Replaces the panel’s top cap and adds 2′′(51mm) to the
panel’s height.
1) Product number.
Expanded Top Finish Cap
FC-1
FC-3
FC-2
FC-4
2) Trim color.
Description
Number
Price
End-of-Run Cap
Two-Way
Three-Way
Four-Way
90В° Corner
FC-1
FC-2
FC-3
FC-4
FC-90
$29
22
35
45
28
Features
To Order, Specify:
• Includes cover.
• Used to join expanded top caps in a panel run.
• Two-way cap is for straight connection over a straight finish
post.
• Three-way cap is for connections of three panels.
• Four-way cap is for connections of four panels.
• 90° corner cap is for use in conjunction with a 90° finish post.
• End-of-run cap is used at an end-of-panel-run condition.
1) Product number.
2) Trim color.
FC-90
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
167
UniGroup Too Price List
Electrical and Cable Management
Ported Panel Cover Plates for use with PLACES
Ported Panel Cover Plates
HPPC-0001
HPPC-0002
HPPC-0003
HPPC-0004
HPPC-0005
HPPC-0008
168
April 2008 / USA
Height
Width
Description
Number
Price
11′′(279mm)
6′′(152mm)
Blank
Electrical access only
Electrical access and one standard
wall outlet interface module opening
Electrical access and two information plate
interface module openings
Fabric-covered blank
Two information plate interface
modular openings
HPPC-0001
HPPC-0002
HPPC-0003
$28
28
28
HPPC-0004
28
HPPC-0005
HPPC-0008
43
28
Features
To Order, Specify:
• Cable interface connector modules snap into the openings on
the face of cover plate HPPC-0003, HPPC-0004 and
HPPC-0008.
• Pre-configured cable interface connector modules must be
purchased from their respective manufacturers. HAWORTH
does not furnish these modules.
• Power receptacles for The Power Base must be ordered
separately when specifying cover plates that provide
electrical access.
• Standard wall outlet opening measures 2.00′′(51mm) x
2.75′′(70mm).
• Information plate opening measures 1.38′′(35mm) x
2.70′′(69mm).
Not for use with power sources other than 120 volt 60
hertz.
1) Product number.
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Trim color or fabric surface and color.
UniGroup Too Price List
Electrical and Cable Management
Chicago Ported Panel Cover Plates for use with PLACES
Chicago Ported Panel Cover
Plates
HPPC-0002-CU
Height
Width
Description/Receptacle Location
Number
Price
11′′(279mm)
6′′(152mm)
Electrical access only/upper
Electrical access only/lower
Electrical access/upper and 1 DEC or
AT&T interface module opening
Electrical access/lower and 1 DEC or
AT&T interface module opening
Electrical access/upper and 2 AMP
interface module openings
Electrical access/lower and 2 AMP
interface module openings
Fabric-covered blank
HPPC-0002-CU
HPPC-0002-CL
HPPC-0003-CU
$28
28
28
HPPC-0003-CL
28
HPPC-0004-CU
28
HPPC-0004-CL
28
HPPC-0005-C
43
HPPC-0002-CL
HPPC-0003-CU
HPPC-0003-CL
HPPC-0004-CU
HPPC-0004-CL
Features
To Order, Specify:
• Cable interface connector modules snap into the openings on
the face of cover plate HPPC-0003 and HPPC-0004.
• Preconfigured cable interface connector modules must be
purchased from their respective manufacturers. HAWORTH
does not furnish these modules.
• Power receptacles must be ordered separately when
specifying cover plates that provide electrical access.
• Chicago Electrical Codes require receptacles in back-to-back
applications to be staggered, one above the other. Therefore,
when ordering HFP-1CW, HFP-1CT, HFP-1C panels (one
back-to-back port) and HFP-4CW, HFP-4CT, HFP-4C panels
(two back-to-back ports), specify one pair of ��upper’’
(HPPC-CU) and ��lower’’ (HPPC-CL) cover plates for each
back-to-back port.
1) Product number.
2) Trim color or fabric surface and color.
HPPC-0005-C
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
169
UniGroup Too Price List
Electrical and Cable Management
Desktop Port for use with UniGroup Too, UniGroup, PLACES
Desktop Port
BEDP
Description
Height
Width
Number
Price
Desktop Port with 6′(1829mm) cord
Desktop Port with 12′(3658mm) cord
3 1/2′′(89mm)
9 5/8′′(244mm)
BEDP-6
BEDP-12
$256
256
Features
To Order, Specify:
• 6′(1829mm) or 12′(3658mm) black cord option.
• Three power outlets and one modular furniture
telecommunications outlet opening [1.38′′(25mm) x
2.71′′(69mm)] with blank cover.
• Mounts on worktops from 3/4′′(19mm) to 1 3/4′′(44mm) thick.
• Not available for use in Los Angeles, Chicago or New York.
• Power can be routed from panel, floor or wall.
• Allows for off-modularity.
• Module and bracket available in graphite finish only with black
cord.
• Not for power sources other than 120 volt 60 hertz.
• Shipped assembled.
1) Product number.
(No finish specification required.)
Specification Tips
• Attaches to back edge of worktop with threaded knob.
• Power cord plugs into receptacle outlet or into a building
outlet. Desktop ports cannot be linked together.
• Communication info plates must be field supplied.
• Cord use should be reviewed by local authorities (electrical
inspector) prior to ordering.
• For worksurfaces without wireway install desktop port prior to
attaching worksuface to panel.
• May cause interference with panel-mounted accessories such
as tackboards, slat pads, markerboards, etc.
170
April 2008 / USA
Class IF – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Electrical and Cable Management
Flip Top Units for use with UniGroup Too, UniGroup, PLACES
Bezel
Depth
Width
Flip Top Unit
Configuration
Number
Price
2 Power, 2 Data
3 Power, 1 Data
3 Power, 3 Data
4 Power, 2 Data
EUE1-0000-1221W
EUE1-0000-1311W
EUE1-0000-1331W
EUE1-0000-1421W
$375
375
375
375
2 Power, 2 Data
3 Power, 1 Data
3 Power, 3 Data
4 Power, 2 Data
EUE2-0000-1221W
EUE2-0000-1311W
EUE2-0000-1331W
EUE2-0000-1421W
$750
750
750
750
Hardwire Single-Sided Outlets
8 5/16′′(211mm)
4 3/8′′(111mm)
11 1/4′′(286mm)
2 Power, 2 Data
3 Power, 3 Data
EUE1-0000-C221W
EUE1-0000-C331W
$428
428
Hardwire Double-Sided Outlets
8 5/16′′(211mm)
8′′(203mm)
11 1/4′′(286mm)
2 Power, 2 Data
3 Power, 3 Data
EUE2-0000-C221W
EUE2-0000-C331W
$856
856
Corded Single-Sided Outlets
8 5/16′′(211mm)
4 3/8′′(111mm)
11 1/4′′(286mm)
Corded Double-Sided Outlets
8 5/16′′(211mm)
8′′(203mm)
EUE1-1331W
11 1/4′′(286mm)
EUE2-1331W
EUE1-C331W
EUE2-C331W
Features
To Order, Specify:
• Hardwire flip top unit includes one flip top unit with power
outlets and communication openings, mounting clips, 6 foot
flexible metal conduit feed with wires for hardwire, multiple
data jack adapters to accommodate most varieties of field
supplied data jacks, also includes blank data covers.
• Corded flip top unit includes one flip top unit with power
outlets and communication openings, 12 foot long – 15-amp
cord with plug, mounting clips, multiple data jack adapters to
accommodate most varieties of field supplied data jacks, also
includes blank data covers.
• Flip top unit is flush mounted with spring release cover.
• Flip top unit overall height is 2 3/4′′(70mm) and will extend
below worksurfaces.
• Standard in anodized finish.
• Ships assembled.
1) Product number.
(No finish specification required.)
Specification Tips
• Flip top unit plug-in cord drops down from bottom of unit to
plug into external power outlet.
• Flip top unit can be field retrofitted. Refer to Specification
Guide.
• For use with 120 volt 60 hertz power source only.
• Hardwired applications should be reviewed by local
authorities (electrical inspector) prior to ordering.
Class PT – GSA: Open Market
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
171
UniGroup Too Price List
Electrical and Cable Management
Power/Data Domes for use with UniGroup Too, UniGroup, PLACES
Power/Data Dome
JAP-2
JAP-4
Class FM
Description
Number
Price
Two (2) power outlets and two (2) plates for data connection
Four (4) power outlets
JAP-2
JAP-4
$170
186
Features
To Order, Specify:
•
•
•
•
•
•
1) Product number.
(No finish specification required.)
Provides power and communication access at desk height.
Field installed. Mounts into 3′′(76mm) diameter hole.
Available in black finish color only.
Power cord is 72′′(1829mm) long.
Cut for cutouts for data connectors.
4TWP-2 includes a voice/data adapter kit to accept couplers
and jacks.
JAP-2 Data Connection Cutout Sizes
Frame Dimensions
1.060
1.060
0.745
0.585
Connector
Cutout
It is recommended that the cutout
sizes are confirmed before ordering
connectors from suppliers.
Worksurface Grommet
WUAC-WSG
Class CA
Height
Inside
Diameter
Outside
Diameter
Number
Price
1′′(25mm)
2 3/4′′(70mm)
3′′(76mm)
WUAC-WSG
$13
Features
To Order, Specify:
• Includes one cover.
• Must be field-installed.
• Available in charcoal color only.
1) Product number.
(No finish specification required.)
Available on RUSH.
172
April 2008 / USA
SIN 711-2; Discount Group II
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
This page intentionally blank
April 2008 / USA
173
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Rectangular
24" x 60"
Features
To Order, Specify:
•
•
•
•
1) Product number.
•
•
•
24" x 72"
•
WURA
•
•
•
Includes worksurface and tie plate.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edge and 1mm
edgeband on sides and back, or
–Cascade (V) on user edge and 1mm edgeband on
sides and back.
Worksurfaces predrilled to accept most support
options.
Optional wireway along back edge of worksurface is
color-matched to solid side/back edge trim. When
wood grain edge trim is specified, wireway will be
Charcoal. Refer to Specification Guide for wireway
details.
24′′(607mm)- to 60′′(1524mm)-wide worksurfaces
have one wireway.
Worksurfaces wider than 60′′(1524mm) have two
wireways.
Installed worksurfaces without wireway will not
allow clearance for power plug.
Depths and widths shown in nominal dimensions.
T-Mold or Edgeband
2) Laminate surface color.
3) Edge trim color.
Cascade
1) Product number.
2) Laminate surface color.
3) Side/back edgeband trim color.
4) Front Cascade edge trim color.*
*Cascade translucent edge is priced as Group II
1 Edge Options:
T
T-Mold
J
Edgeband
V
Cascade
Available on RUSH with Standard Core.
Specification Tips
• For additional widths to span a 3-way panel condition,
refer to panel-specific worksurface section.
• Worksurface support specific to product line;
must be separately specified.
• –Cantilever bracket
• –Side brackets
• –Worksurface support panel
• –Worksurface support column or leg
• –Attached lower storage
• Intermediate support is required for unsupported
worksurface span greater than 60′′(1524mm).
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces
with 50′′(1270mm) spans that are heavily loaded and
not otherwise supported by mid-span cantilevers,
worksurface support panels, columns, legs
or attached lower storage.
174
April 2008 / USA
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Rectangular
Depth
Width
Laminate
Number
18′′(457mm)
24′′(610mm)
26′′(660mm)
30′′(762mm)
32′′(813mm)
36′′(914mm)
38′′(965mm)
42′′(1067mm)
44′′(1118mm)
48′′(1219mm)
50′′(1270mm)
54′′(1372mm)
56′′(1422mm)
60′′(1524mm)
62′′(1575mm)
66′′(1676mm)
68′′(1727mm)
72′′(1829mm)
74′′(1880mm)
78′′(1981mm)
80′′(2032mm)
84′′(2134mm)
86′′(2184mm)
90′′(2286mm)
92′′(2337mm)
96′′(2438mm)
98′′(2489mm)
102′′(2591mm)
104′′(2642mm)
108′′(2743mm)
110′′(2794mm)
114′′(2890mm)
116′′(2946mm)
120′′(3048mm)
24′′(610mm)
26′′(660mm)
30′′(762mm)
32′′(813mm)
36′′(914mm)
38′′(965mm)
42′′(1067mm)
44′′(1118mm)
48′′(1219mm)
50′′(1270mm)
54′′(1372mm)
56′′(1422mm)
60′′(1524mm)
62′′(1575mm)
66′′(1676mm)
68′′(1727mm)
72′′(1829mm)
74′′(1880mm)
78′′(1981mm)
80′′(2032mm)
84′′(2134mm)
86′′(2184mm)
90′′(2286mm)
92′′(2337mm)
96′′(2438mm)
98′′(2489mm)
102′′(2591mm)
104′′(2642mm)
108′′(2743mm)
110′′(2794mm)
114′′(2890mm)
116′′(2946mm)
120′′(3048mm)
WURA-1824-L
WURA-1826-L
WURA-1830-L
WURA-1832-L
WURA-1836-L
WURA-1838-L
WURA-1842-L
WURA-1844-L
WURA-1848-L
WURA-1850-L
WURA-1854-L
WURA-1856-L
WURA-1860-L
WURA-1862-L
WURA-1866-L
WURA-1868-L
WURA-1872-L
WURA-1874-L
WURA-1878-L
WURA-1880-L
WURA-1884-L
WURA-1886-L
WURA-1890-L
WURA-1892-L
WURA-1896-L
WURA-1898-L
WURA-18A2-L
WURA-18A4-L
WURA-18A8-L
WURA-18B0-L
WURA-18B4-L
WURA-18B6-L
WURA-18C0-L
WURA-2424-L
WURA-2426-L
WURA-2430-L
WURA-2432-L
WURA-2436-L
WURA-2438-L
WURA-2442-L
WURA-2444-L
WURA-2448-L
WURA-2450-L
WURA-2454-L
WURA-2456-L
WURA-2460-L
WURA-2462-L
WURA-2466-L
WURA-2468-L
WURA-2472-L
WURA-2474-L
WURA-2478-L
WURA-2480-L
WURA-2484-L
WURA-2486-L
WURA-2490-L
WURA-2492-L
WURA-2496-L
WURA-2498-L
WURA-24A2-L
WURA-24A4-L
WURA-24A8-L
WURA-24B0-L
WURA-24B4-L
WURA-24B6-L
WURA-24C0-L
24′′(610mm)
1 2 3
(T)
T-Mold
(J)
Edgeband
(V)
Cascade
Group I
(V)
Cascade
Group II
$156
165
171
181
190
193
196
223
250
260
270
279
289
306
322
337
353
364
376
388
400
412
424
427
436
459
469
478
487
497
505
514
518
$174
183
190
199
210
220
231
263
295
307
318
329
339
360
379
398
414
424
434
445
454
464
474
516
485
507
518
528
538
548
558
569
582
$174
184
191
202
212
215
218
248
278
289
300
310
321
340
358
375
392
405
418
431
445
458
471
474
485
510
521
531
541
552
561
571
576
$194
204
212
222
234
245
257
293
328
341
354
366
377
400
421
442
460
471
482
494
505
516
527
573
539
563
575
587
598
609
620
632
646
$187
198
205
217
228
231
234
266
298
310
322
332
344
364
384
402
420
434
448
462
477
490
504
507
519
546
558
568
579
591
601
611
617
$208
219
228
238
251
263
276
314
352
365
379
392
404
428
451
473
492
504
516
529
541
552
564
613
577
603
615
628
640
652
664
676
691
$214
225
232
244
255
258
261
293
325
337
349
359
371
391
411
429
447
461
475
489
504
517
531
534
546
573
585
595
606
618
628
638
644
$235
246
255
265
278
290
303
341
379
392
406
419
431
455
478
500
519
531
543
556
568
579
591
640
604
630
642
655
667
679
691
703
718
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
175
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Rectangular
176
April 2008 / USA
Depth
Width
Laminate
Number
30′′(762mm)
24′′(610mm)
26′′(660mm)
30′′(762mm)
32′′(813mm)
36′′(914mm)
38′′(965mm)
42′′(1067mm)
44′′(1118mm)
48′′(1219mm)
50′′(1270mm)
54′′(1372mm)
56′′(1422mm)
60′′(1524mm)
62′′(1575mm)
66′′(1676mm)
68′′(1727mm)
72′′(1829mm)
74′′(1880mm)
78′′(1981mm)
80′′(2032mm)
84′′(2134mm)
86′′(2184mm)
90′′(2286mm)
92′′(2337mm)
96′′(2438mm)
98′′(2489mm)
102′′(2591mm)
104′′(2642mm)
108′′(2743mm)
110′′(2794mm)
114′′(2890mm)
116′′(2946mm)
120′′(3048mm)
WURA-3024-L
WURA-3026-L
WURA-3030-L
WURA-3032-L
WURA-3036-L
WURA-3038-L
WURA-3042-L
WURA-3044-L
WURA-3048-L
WURA-3050-L
WURA-3054-L
WURA-3056-L
WURA-3060-L
WURA-3062-L
WURA-3066-L
WURA-3068-L
WURA-3072-L
WURA-3074-L
WURA-3078-L
WURA-3080-L
WURA-3084-L
WURA-3086-L
WURA-3090-L
WURA-3092-L
WURA-3096-L
WURA-3098-L
WURA-30A2-L
WURA-30A4-L
WURA-30A8-L
WURA-30B0-L
WURA-30B4-L
WURA-30B6-L
WURA-30C0-L
1 2 3
(T)
T-Mold
(J)
Edgeband
(V)
Cascade
Group I
(V)
Cascade
Group II
$248
260
271
279
289
296
304
313
331
350
369
388
396
418
440
462
483
493
503
513
523
534
544
546
554
570
579
587
595
603
611
620
702
$276
289
302
311
321
329
338
348
368
389
410
431
440
464
489
513
537
548
559
570
581
593
604
606
615
633
643
652
661
670
679
689
780
$296
310
324
333
344
353
362
372
394
417
439
462
471
497
524
549
575
587
598
610
622
635
646
648
658
677
688
698
707
717
727
737
834
$323
337
351
360
371
380
389
399
421
444
466
489
498
524
551
576
602
614
625
637
649
662
673
675
685
704
715
725
734
744
754
764
861
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Rectangular Key
Depth
Width
Laminate
Number
30′′(762mm)
36′′(914mm)
48′′(1219mm)
48′′(1219mm)
60′′(1524mm)
72′′(1829mm)
60′′(1524mm)
72′′(1829mm)
60′′(1524mm)
72′′(1829mm)
WURY-3036-L
WURY-3048-L
WURY-3648-L
WURY-3660-L
WURY-3672-L
WURY-4260-L
WURY-4272-L
WURY-4860-L
WURY-4872-L
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
WURY
1 2 3
(T)
T-Mold
(J)
Edgeband
(V)
Cascade
Group I
(V)
Cascade
Group II
$471
486
$501
562
587
$588
607
$616
643
$519
540
$557
624
649
$653
679
$681
714
$557
578
$596
668
693
$699
731
$727
764
$584
605
$623
695
720
$726
758
$754
791
Features
To Order, Specify:
•
•
•
•
1) Product number.
•
•
•
•
•
•
•
•
Includes worksurface and tie plate.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edge and 1mm edgeband on
back, or
–Cascade (V) on user edge and 1mm edgeband on sides
and back.
Worksurface width dimension attaches directly to panel
and matches panel width.
Worksurfaces predrilled to accept most support options.
Optional wireways along back edges are color-matched to
solid side/back edge trim. When wood grain laminate is
specified, wireways will be Charcoal. Refer to Specification
Guide for wireway details.
72′′(1829mm) wide worksurfaces have two wireways when
�A’ option ordered.
Installed worksurfaces without wireway will not allow
clearance for power plug.
Depths and widths shown in nominal dimensions.
Wireway will accommodate end-of-run trim.
Available on RUSH with Standard Core.
Specification Tips
• Worksurface support specific to product line; must be
separately specified.
• –Cantilever bracket
• –Side brackets
• –Worksurface support panel
• –Worksurface support column or leg
• –Flush mount plates
• Worksurface support column is required.
T-Mold or Edgeband
2) Laminate surface color.
3) Edge trim color.
Cascade
1) Product number.
2) Laminate surface color.
3) Side/back edgeband trim color.
4) Front Cascade edge trim color.*
*Cascade translucent edge is priced as Group II
1 Edge Options:
T
T-Mold
J
Edgeband
V
Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
177
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Rectangular Swell
Depth
Swell
Depth
18′′(457mm)
21′′(533mm)
24′′(610mm)
27′′(686mm)
30′′(762mm)
33′′(838mm)
WURS
Width
Laminate
Number
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
WURS-1824-L
WURS-1830-L
WURS-1836-L
WURS-1842-L
WURS-1848-L
WURS-1854-L
WURS-1860-L
WURS-2424-L
WURS-2430-L
WURS-2436-L
WURS-2442-L
WURS-2448-L
WURS-2454-L
WURS-2460-L
WURS-3024-L
WURS-3030-L
WURS-3036-L
WURS-3042-L
WURS-3048-L
WURS-3054-L
WURS-3060-L
1 2 3
(T)
T-Mold
(J)
Edgeband
(V)
Cascade
Group I
(V)
Cascade
Group II
$213
215
218
233
296
319
341
$220
223
226
241
307
331
354
$289
291
294
310
342
374
406
$237
239
243
259
329
355
379
$245
248
252
268
342
368
394
$321
324
327
345
380
416
451
$254
256
261
278
353
380
406
$263
266
270
287
366
394
422
$344
347
350
370
407
446
483
$281
283
288
305
380
407
433
$290
293
297
314
393
421
449
$371
374
377
397
434
473
510
Features
To Order, Specify:
•
•
•
•
1) Product number.
•
•
•
•
•
Includes worksurface and tie plate.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edge and 1mm edgeband on
sides and back, or
–Cascade (V) on user edge and 1mm edgeband on sides
and back.
Worksurfaces predrilled to accept most support options.
Optional wireway along back edge of worksurface is
color-matched to solid side/back edge trim. When wood grain
edge trim is specified, wireway will be Charcoal. Refer to
Specification Guide for wireway details.
Installed worksurfaces without wireway will not allow
clearance for power plug.
Depths and widths shown in nominal dimensions.
Available on RUSH with Standard Core.
T-Mold or Edgeband
2) Laminate surface color.
3) Edge trim color.
Cascade
1) Product number.
2) Laminate surface color.
3) Side/back edgeband trim color.
4) Front Cascade edge trim color.*
*Cascade translucent edge is priced as Group II
1 Edge Options:
Specification Tips
T
T-Mold
• Worksurface support specific to product line; must be
separately specified.
• –Cantilever bracket
• –Side bracket
• –Worksurface support panel
• –Worksurface support column or leg
• Suggested pedestal style is mobile.
J
Edgeband
V
Cascade
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces with
50′′(1270mm) spans that are heavily loaded and not otherwise
supported by mid-span cantilevers, worksurface support
panels, columns or legs.
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
178
April 2008 / USA
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Rectangular Inverse Swell
Depth
Swell
Depth
18′′(457mm)
15′′(381mm)
24′′(610mm)
21′′(533mm)
30′′(762mm)
27′′(686mm)
WURW
Width
Laminate
Number
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
WURW-1824-L
WURW-1830-L
WURW-1836-L
WURW-1842-L
WURW-1848-L
WURW-1854-L
WURW-1860-L
WURW-2424-L
WURW-2430-L
WURW-2436-L
WURW-2442-L
WURW-2448-L
WURW-2454-L
WURW-2460-L
WURW-3024-L
WURW-3030-L
WURW-3036-L
WURW-3042-L
WURW-3048-L
WURW-3054-L
WURW-3060-L
1 2 3
(T)
T-Mold
(J)
Edgeband
(V)
Cascade
Group I
(V)
Cascade
Group II
$213
215
218
233
296
319
341
$220
223
226
241
307
331
355
$289
291
294
310
342
374
406
$237
239
243
259
329
355
379
$245
248
252
268
342
368
394
$321
324
327
345
380
416
451
$254
256
261
278
353
380
406
$263
266
270
287
366
394
422
$344
347
350
370
407
446
483
$281
283
288
305
380
407
433
$290
293
297
314
393
421
449
$371
374
377
397
434
473
510
Features
To Order, Specify:
•
•
•
•
1) Product number.
•
•
•
•
•
Includes worksurface and tie plate.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edge and 1mm edgeband on
sides and back, or
–Cascade (V) on user edge and 1mm edgeband on sides
and back.
Worksurfaces predrilled to accept most support options.
Optional wireway along back edge of worksurface is
color-matched to solid side/back edge trim. When wood grain
edge trim is specified, wireway will be Charcoal. Refer to
Specification Guide for wireway details.
Installed worksurfaces without wireway will not allow
clearance for power plug.
Depths and widths shown in nominal dimensions.
Available on RUSH with Standard Core.
T-Mold or Edgeband
2) Laminate surface color.
3) Edge trim color.
Cascade
1) Product number.
2) Laminate surface color.
3) Side/back edgeband trim color.
4) Front Cascade edge trim color.*
*Cascade translucent edge is priced as Group II
1 Edge Options:
Specification Tips
T
T-Mold
• Worksurface support specific to product line; must be
separately specified.
• –Cantilever bracket
• –Side brackets
• –Worksurface support panel
• –Worksurface support column or leg
• Suggested pedestal style is mobile.
J
Edgeband
V
Cascade
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces with
50′′(1270mm) spans that are heavily loaded and not otherwise
supported by mid-span cantilevers, worksurface support
panels, columns or legs.
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
179
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Left/Right
Depth
Rectangular Transition
24"
18′′(457mm)/24′′(610mm)
18"
24′′(610mm)/18′′(457mm)
WURT-N43
18"
24"
WURT-N34
24′′(610mm)/30′′(762mm)
30′′(762mm)/24′′(610mm)
Width
Laminate
Number
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
WURT-2424-L
WURT-2430-L
WURT-2436-L
WURT-2442-L
WURT-2448-L
WURT-2454-L
WURT-2460-L
WURT-2424-L
WURT-2430-L
WURT-2436-L
WURT-2442-L
WURT-2448-L
WURT-2454-L
WURT-2460-L
WURT-3024-L
WURT-3030-L
WURT-3036-L
WURT-3042-L
WURT-3048-L
WURT-3054-L
WURT-3060-L
WURT-3024-L
WURT-3030-L
WURT-3036-L
WURT-3042-L
WURT-3048-L
WURT-3054-L
WURT-3060-L
(V)
(V)
(T)
(J)
Cascade Cascade
T-Mold Edgeband Group I
Group II
1 2 3
N34
N34
N34
N34
N34
N34
N34
N43
N43
N43
N43
N43
N43
N43
N45
N45
N45
N45
N45
N45
N45
N54
N54
N54
N54
N54
N54
N54
To Order, Specify:
•
•
•
•
1) Product number.
•
•
•
•
Includes worksurface and tie plate.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edge and 1mm edgeband on
sides and back, or
–Cascade (V) on user edge and 1mm edgeband on sides
and back.
Worksurfaces predrilled to accept most support options.
Optional wireway along back edge of worksurface is
color-matched to solid side/back edge trim. When wood grain
edge trim is specified, wireway will be Charcoal. Refer to
Specification Guide for wireway details.
Installed worksurfaces without wireway will not allow
clearance for power plug.
Depths and widths shown in nominal dimensions.
Available on RUSH with Standard Core.
Specification Tips
• Worksurface support specific to product line; must be
separately specified.
• –Cantilever bracket
• –Side brackets
• –Worksurface support panel
• –Worksurface support column or leg
• –Attached lower storage
• For worksurfaces less than 42′′(1067mm) wide, suggested
pedestal style is mobile.
• For worksurfaces greater than 42′′(1067mm) wide, attached
pedestal may be installed on deepest side.
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces with
50′′(1270mm) spans that are heavily loaded and not otherwise
supported by mid-span cantilevers, worksurface support
panels, columns, legs or attached lower storage.
April 2008 / USA
$261
284
306
328
386
417
448
$261
284
306
328
386
417
448
$270
294
317
341
400
432
464
$270
294
317
341
400
432
464
Features
•
180
$234
255
275
295
347
375
403
$234
255
275
295
347
375
403
$242
264
285
307
360
389
418
$242
264
285
307
360
389
418
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
$280
304
328
352
413
447
480
$280
304
328
352
413
447
480
$290
315
340
366
428
463
496
$290
315
340
366
428
463
496
$307
331
355
379
440
474
507
$307
331
355
379
440
474
507
$317
342
367
393
455
490
523
$317
342
367
393
455
490
523
T-Mold or Edgeband
2) Laminate surface color.
3) Edge trim color.
Cascade
1) Product number.
2) Laminate surface color.
3) Side/back edgeband trim color.
4) Front Cascade edge trim color.*
*Cascade translucent edge is priced as Group II
1 Edge Options:
T
T-Mold
J
Edgeband
V
Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Transitional
Left/Right
Depth
Wedge
18"
24′(610mm)/18′′(457mm)
24"
18′′(457mm)/24′′(610mm)
WURE-N34
24"
18"
WURE-N43
30′′(762mm)/24′′(610mm)
24′′(610mm)/30′′(762mm)
Width
Laminate
Number
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
WURE-2424-L
WURE-2430-L
WURE-2436-L
WURE-2442-L
WURE-2448-L
WURE-2454-L
WURE-2460-L
WURE-2424-L
WURE-2430-L
WURE-2436-L
WURE-2442-L
WURE-2448-L
WURE-2454-L
WURE-2460-L
WURE-3024-L
WURE-3030-L
WURE-3036-L
WURE-3042-L
WURE-3048-L
WURE-3054-L
WURE-3060-L
WURE-3024-L
WURE-3030-L
WURE-3036-L
WURE-3042-L
WURE-3048-L
WURE-3054-L
WURE-3060-L
(V)
(V)
(T)
(J)
Cascade Cascade
T-Mold Edgeband Group I
Group II
1 2 3
N43
N43
N43
N43
N43
N43
N43
N34
N34
N34
N34
N34
N34
N34
N54
N54
N54
N54
N54
N54
N54
N45
N45
N45
N45
N45
N45
N45
$239
261
281
301
355
382
411
$239
261
281
301
355
382
411
$247
270
290
313
367
397
426
$247
270
290
313
367
397
426
$266
290
312
335
394
425
457
$266
290
312
335
394
425
457
$275
300
323
348
408
441
473
$275
300
323
348
408
441
473
Features
To Order, Specify:
•
•
•
•
1) Product number.
•
•
•
•
•
Includes worksurface and tie plate.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edge and 1mm edgeband on
sides and back, or
–Cascade (V) on user edge and 1mm edgeband on sides
and back.
Worksurfaces predrilled to accept most support options.
Optional wireways along back edges are color-matched to
solid side/back edge trim. When wood grain laminate is
specified, wireways will be Charcoal. Refer to Specification
Guide for wireway details.
Installed worksurfaces without wireway will not allow
clearance for power plug.
Depths and widths shown in nominal dimensions.
Available on RUSH with Standard Core.
Specification Tips
• Worksurface support specific to product line; must be
separately specified.
• –Cantilever bracket
• –Side brackets
• –Worksurface support panel
• –Worksurface support column or leg
• Suggested pedestal style is mobile.
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces with
50′′(1270mm) spans that are heavily loaded and not otherwise
supported by mid-span cantilevers, worksurface end panels,
posts or attached lower storage.
$285
311
334
359
422
455
489
$285
311
334
359
422
455
489
$295
322
346
373
437
472
506
$295
322
346
373
437
472
506
$312
338
361
386
449
482
516
$312
338
361
386
449
482
516
$322
349
373
400
464
499
533
$322
349
373
400
464
499
533
T-Mold or Edgeband
2) Laminate surface color.
3) Edge trim color.
Cascade
1) Product number.
2) Laminate surface color.
3) Side/back edgeband trim color.
4) Front Cascade edge trim color.*
*Cascade translucent edge is priced as Group II
1 Edge Options:
T
T-Mold
J
Edgeband
V
Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
181
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Rectangular Radius End
(Right-hand orientation)
Depth
Width
Laminate
Number
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
WURR-1824-L
WURR-1830-L
WURR-1836-L
WURR-1842-L
WURR-1848-L
WURR-1854-L
WURR-1860-L
WURR-2424-L
WURR-2430-L
WURR-2436-L
WURR-2442-L
WURR-2448-L
WURR-2454-L
WURR-2460-L
WURR-3024-L
WURR-3030-L
WURR-3036-L
WURR-3042-L
WURR-3048-L
WURR-3054-L
WURR-3060-L
24′′(610mm)
(Left-hand orientation)
WURR
30′′(762mm)
1 2 3 4
(T)
T-Mold
(J)
Edgeband
(V)
Cascade
Group I
(V)
Cascade
Group II
$206
212
234
260
330
355
380
$213
218
242
268
340
366
392
$307
314
331
351
380
406
431
$230
236
261
289
367
395
422
$237
243
269
298
378
407
436
$342
349
368
390
422
451
479
$247
253
280
310
393
423
452
$254
261
289
319
405
436
467
$366
374
394
418
452
483
513
$274
280
307
337
420
450
479
$281
288
316
346
432
463
494
$393
401
421
445
479
510
540
Features
To Order, Specify:
•
•
•
•
1) Product number.
•
•
•
•
•
Includes worksurface and tie plate.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edge and 1mm edgeband on
sides and back, or
–Cascade (V) on user edge and 1mm edgeband on sides and
back.
Worksurfaces predrilled to accept most support options.
Optional wireway along back edge of worksurface is
color-matched to solid side/back edge trim. When wood grain
edge trim is specified, wireway will be Charcoal. Refer to
Specification Guide for wireway details.
Installed worksurfaces without wireway will not allow
clearance for power plug.
Depths and widths shown in nominal dimensions.
Available on RUSH with Standard Core.
April 2008 / USA
2) Laminate surface color.
3) Edge trim color.
Cascade
1) Product number.
2) Laminate surface color.
3) Side/back edgeband trim color.
4) Front Cascade edge trim color.*
*Cascade translucent edge is priced as Group II
1 Edge Options:
Specification Tips
T
T-Mold
• Worksurface support specific to product line; must be
separately specified.
• –Cantilever bracket
• –Side brackets
• –Worksurface support panel
• –Worksurface support column or leg
• –Attached lower storage (for worksurfaces greater than
36′′ wide)
• For T-mold and edgeband
• –18′′(457mm) specify the standard mini cantilever bracket for
radius end.
• –24′′(610mm)-30′′(762mm) specify standard cantilever
bracket for radius end.
• When using snap-n-fit cantilevers for 18′′(457mm) and
24′′(610mm) requires mini snap-n-fit cantilever, 30′′(762mm)
requires standard snap-n-fit cantilever.
• For Cascade edge, for aesthetic reasons, use:
• –Side brackets (PLACES and UniGroup) and column support or
leg.
• For worksurfaces less than 42′′(1067mm) wide, suggested
pedestal style is mobile.
J
Edgeband
V
Cascade
Note: Separately specified worksurface reinforcement channels
provide additional support for worksurfaces with 50′′(1270mm)
spans that are heavily loaded and not otherwise supported by
mid-span cantilevers, worksurface support panels, posts or attached
lower storage.
182
T-Mold or Edgeband
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
4 Orientation (as seated):
R Right-hand
L
Left-hand
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Rectangular — Split Top
Depth
Width
Laminate
Number
24′′(610mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
WURK-2436-L
WURK-2442-L
WURK-2448-L
WURK-3036-L
WURK-3042-L
WURK-3048-L
30′′(762mm)
1 2 3
(T)
T-Mold
(J)
Edgeband
(V)
Cascade
Group I
(V)
Cascade
Group II
$1231
1281
1331
$1307
1357
1406
$1443
1502
1559
$1519
1578
1634
$1549
1612
1673
$1625
1688
1748
$1576
1639
1700
$1652
1715
1775
Features
WURK
To Order, Specify:
• Includes rear worksurface, front worksurface, mechanism,
and tie plate.
• Dual worksurfaces with a 1′′(25mm) space between the front
and rear worksurfaces. Front worksurface is 12′′(305mm)
deep.
• High-pressure laminate with:
• –3mm full perimeter T-mold (T), or
• –3mm edgeband (J) or Cascade (V) edge on front and rear
front edge, and 1mm on back and side edge of front
worksurface.
• Adjustable front worksurface is attached to the rear
worksurface with a spring-assist mechanism.
• Front worksurface manually adjusts to any position
7′′(178mm) above and 5 3/4′′(146mm) below the rear
worksurface.
• Front worksurface tilts -15° to +9°.
• Spring assist mechanism available in charcoal finish color
only.
• Optional wireway along back edge of worksurface is
color-matched to solid side/back edge trim. When wood grain
edge trim is specified, wireway will be Charcoal.
• Installed worksurfaces without wireway will not allow
clearance for power plug.
• Depths and widths shown in nominal dimensions.
Available on RUSH with Standard Core.
Specification Tips
• Fixed-height rear worksurface is predrilled to accept standard
cantilever brackets. If using snap-n-fit cantilever on
24′′(610mm) deep worksurfaces, specify snap-n-fit mini
cantilever.
• Worksurface support specific to product line; must be
separately specified.
• –Cantilever bracket
• –Side brackets
• –Worksurface support panel
• –Worksurface support column or leg
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
T-Mold or Edgeband
1) Product number.
2) Laminate surface color.
3) Edge trim color.
Cascade
1) Product number.
2) Laminate surface color.
3) Side/back edgeband trim color.
4) Front Cascade edge trim color.*
*Cascade translucent edge is priced as Group II
1 Edge Options:
T
T-Mold
J
Edgeband
V
Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
April 2008 / USA
183
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Left/Right
Depth
Corner, 90В° Straight Front
18′′(457mm)
24′′(610mm)
30′′(762mm)
WUCA
Width
Laminate
Number
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
WUCA-3636-L
WUCA-4242-L
WUCA-4848-L
WUCA-5454-L
WUCA-3636-L
WUCA-4242-L
WUCA-4848-L
WUCA-5454-L
WUCA-3636-L
WUCA-4242-L
WUCA-4848-L
WUCA-5454-L
1 2 3
$374
409
485
516
$388
423
499
530
$460
495
571
602
$414
455
539
573
$428
469
553
587
$500
541
625
659
To Order, Specify:
•
•
•
•
1) Product number.
•
•
Includes worksurface and tie plate.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edge and 1mm edgeband on
sides and back.
Worksurfaces predrilled to accept most support options.
Optional wireway along back edges of worksurface is
color-matched to solid side/back edge trim. When wood grain
edge trim is specified, wireway will be Charcoal.
Installed worksurfaces without wireway will not allow
clearance for power plug.
Depths and widths shown in nominal dimensions.
Available on RUSH with Standard Core.
Specification Tips
• Rear corner bracket is required and must be separately
specified.
• Worksurface support specific to product line; must be
separately specified.
• –Rear corner bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support panel
• –Side brackets
• Recommend the AKPM-23 or AKPS-5 keyboard pad for
36′′(914mm)-wide corners.
• Due to manufacturing restrictions, not available with
Cascade edge.
April 2008 / USA
(J)
Edgeband
Features
•
•
184
N33
N33
N33
N33
N44
N44
N44
N44
N55
N55
N55
N55
(T)
T-Mold
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
T-Mold or Edgeband
2) Laminate surface color.
3) Edge trim color.
1 Edge Options:
T
T-Mold
J
Edgeband
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Left/Right
Depth
Corner, 90В° Wrap-Around
18′′(457mm)
24′′(610mm)
30′′(762mm)
WUCR
Width
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
Laminate
Number
WUCR-3636-L
WUCR-4242-L
WUCR-4848-L
WUCR-5454-L
WUCR-3636-L
WUCR-4242-L
WUCR-4848-L
WUCR-5454-L
(1)
WUCR-3636-L
WUCR-4242-L
WUCR-4848-L
WUCR-5454-L
1 2 3
N33
N33
N33
N33
N44
N44
N44
N44
N55
N55
N55
N55
(T)
T-Mold
(J)
Edgeband
(V)
Cascade
Group I
(V)
Cascade
Group II
$355
391
462
516
$369
405
476
530
$441
477
548
602
$395
442
529
596
$409
456
543
610
$481
528
615
682
$423
465
549
613
$437
479
563
627
N/A
551
635
699
$450
492
576
640
$464
506
590
654
N/A
578
662
726
(1)
Cascade edge option not available in this size.
Features
To Order, Specify:
•
•
•
•
1) Product number.
•
•
•
•
•
Includes worksurface.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edge and 1mm edgeband on
sides and back, or
–Cascade (V) on user edge and 1mm edgeband on sides
and back.
Worksurfaces predrilled to accept most support options.
Optional wireway along back edges of worksurface is
color-matched to solid side/back edge trim. When wood grain
edge trim is specified, wireway will be Charcoal. Refer to
Specification Guide for wireway details.
Installed worksurfaces without wireway will not allow
clearance for power plug.
Depths and widths shown in nominal dimensions.
Available on RUSH with Standard Core.
T-Mold or Edgeband
2) Laminate surface color.
3) Edge trim color.
Cascade
1) Product number.
2) Laminate surface color.
3) Side/back edgeband trim color.
4) Front Cascade edge trim color.*
*Cascade translucent edge is priced as Group II
1 Edge Options:
Specification Tips
T
T-Mold
• Rear corner bracket is required and must be separately
specified.
• Worksurface support specific to product line; must be
separately specified.
• –Rear corner bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support panel
• –Side brackets
• Recommend the AKPM-23 or AKPS-5 keyboard pad for
36′′(914mm)-wide corners.
J
Edgeband
V
Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
185
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Left/Right
Depth
Corner, 90В° Notched
18′′(457mm)
24′′(610mm)
30′′(762mm)
WUCN
Width
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
Laminate
Number
WUCN-3636-L
WUCN-4242-L
WUCN-4848-L
WUCN-5454-L
WUCN-3636-L
WUCN-4242-L
WUCN-4848-L
WUCN-5454-L
(1)
WUCN-3636-L
WUCN-4242-L
WUCN-4848-L
WUCN-5454-L
1 2 3
N33
N33
N33
N33
N44
N44
N44
N44
N55
N55
N55
N55
(T)
T-Mold
(J)
Edgeband
(V)
Cascade
Group I
(V)
Cascade
Group II
$360
402
483
574
$374
416
497
588
$386
428
509
600
$400
447
537
628
$414
461
551
642
$426
473
563
654
$428
479
575
666
$442
493
589
686
N/A
505
601
698
$455
506
602
693
$469
520
616
713
N/A
532
628
725
(1)
Cascade edge option not available in this size.
Features
To Order, Specify:
•
•
•
•
1) Product number.
•
•
•
•
•
Includes worksurface.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edge and 1mm edgeband on
sides and back, or
–Cascade (V) on user edge and 1mm edgeband on sides
and back.
Worksurfaces predrilled to accept an adjustable keyboard
and most support options.
Optional wireways along back edges are color-matched to
solid side/back edge trim. When wood grain laminate is
specified, wireways will be Charcoal. Refer to Specification
Guide for wireway details.
Installed worksurfaces without wireway will not allow
clearance for power plug.
Depths and widths shown in nominal dimensions.
Available on RUSH with Standard Core.
Specification Tips
• Rear corner bracket is required and must be separately
specified.
• Worksurface support specific to product line; must be
separately specified.
• –Rear corner bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support panel
• –Side brackets
• Recommend the AKPM-23 or AKPS-5 keyboard pad for
36′′(914mm)-wide corners.
T-Mold or Edgeband
2) Laminate surface color.
3) Edge trim color.
Cascade
1) Product number.
2) Laminate surface color.
3) Side/back edgeband trim color.
4) Front Cascade edge trim color.*
*Cascade translucent edge is priced as Group II
1 Edge Options:
T
T-Mold
J
Edgeband
V
Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
186
April 2008 / USA
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Left/Right
Depth
Corner, 90В° Angled
18′′(457mm)
24′′(610mm)
30′′(762mm)
(Left-hand orientation)
(Right-hand orientation)
WUCU
Width
Laminate
Number
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
WUCU-3636-L
WUCU-4242-L
WUCU-4848-L
WUCU-5454-L
WUCU-3636-L
WUCU-4242-L
WUCU-4848-L
WUCU-5454-L
WUCU-3636-L
WUCU-4242-L
WUCU-4848-L
WUCU-5454-L
1 2 3 4
33
33
33
33
44
44
44
44
55
55
55
55
(T)
T-Mold
(J)
Edgeband
$359
405
485
576
$373
419
499
583
$385
431
511
602
$439
450
539
630
$411
464
553
637
$423
476
565
656
Features
To Order, Specify:
•
•
•
•
1) Product number.
Includes worksurface.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edge and 1mm edgeband on
back.
• Optional wireways along back edges are color-matched to
solid side/back edge trim. When wood grain laminate is
specified, wireways will be Charcoal. Refer to Specification
Guide for wireway details.
• Installed worksurfaces without wireway will not allow
clearance for power plug.
• Depths and widths shown in nominal dimensions.
Available on RUSH with Standard Core.
Specification Tips
• Rear corner bracket is required and must be separately
specified.
• Worksurface support specific to product line; must be
separately specified.
• –Rear corner bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support panel
• –Side brackets
• Recommend the AKPM-23 or AKPS-5 keyboard pad for
36′′(914mm)-wide corners.
• Due to manufacturing restrictions, not available with
Cascade edge.
T-Mold or Edgeband
2) Laminate surface color.
3) Edge trim color.
1 Edge Options:
T
T-Mold
J
Edgeband
2 Core Options:
S
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
4 Orientation (as seated):
R Right-hand
L
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
Standard
Left-hand
April 2008 / USA
187
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Left/Right
Depth
Corner, 90В° Wrap-Around
Transitional
Width
18′′(457mm)/24′′(610mm)
24′′(610mm)/18′′(457mm)
24"
24′′(610mm)/30′′(762mm)
18"
WUCT-N34
30′′(762mm)/24′′(610mm)
24"
Laminate
Number
(V)
(V)
(T)
(J)
Cascade Cascade
T-Mold Edgeband Group I
Group II
1 2 3
36′′(914mm)
WUCT-3636-L
42′′(1067mm) WUCT-4242-L
48′′(1219mm) WUCT-4848-L
54′′(1372mm) WUCT-5454-L
36′′(914mm)
WUCT-3636-L
42′′(1067mm) WUCT-4242-L
48′′(1219mm) WUCT-4848-L
54′′(1372mm) WUCT-5454-L
36′′(914mm) (1) WUCT-3636-L
42′′(1067mm) WUCT-4242-L
48′′(1219mm) WUCT-4848-L
54′′(1372mm) WUCT-5454-L
36′′(914mm) (1) WUCT-3636-L
42′′(1067mm) WUCT-4242-L
48′′(1219mm) WUCT-4848-L
54′′(1372mm) WUCT-5454-L
N34
N34
N34
N34
N43
N43
N43
N43
N45
N45
N45
N45
N54
N54
N54
N54
$347
380
453
490
$347
380
453
490
$415
457
543
587
$415
457
543
587
$386
423
503
544
$386
423
503
544
$454
500
593
641
$454
500
593
641
$416
457
543
586
$416
457
543
586
N/A
534
633
683
N/A
534
633
683
$443
484
570
613
$443
484
570
613
N/A
561
660
710
N/A
561
660
710
(1)
Cascade edge option not available in these sizes.
18"
WUCT-N43
Features
To Order, Specify:
•
•
•
•
1) Product number.
•
•
•
•
•
Includes worksurface.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edge and 1mm edgeband on
sides and back, or
–Cascade (V) user edge and 1mm edgeband on sides and
back.
Worksurfaces predrilled to accept most support options.
Optional wireway along back edges of worksurface is
color-matched to solid side/back edge trim. When wood grain
edge trim is specified, wireway will be Charcoal. Refer to
Specification Guide for wireway details.
Installed worksurfaces without wireway will not allow
clearance for power plug.
Depths and widths shown in nominal dimensions.
Available on RUSH with Standard Core.
T-Mold or Edgeband
2) Laminate surface color.
3) Edge trim color.
Cascade
1) Product number.
2) Laminate surface color.
3) Side/back edgeband trim color.
4) Front Cascade edge trim color.*
*Cascade translucent edge is priced as Group II
1 Edge Options:
Specification Tips
T
T-Mold
• Rear corner bracket is required and must be separately
specified.
• Worksurface support specific to product line; must be
separately specified.
• –Rear corner bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support panel
• –Side brackets
• Recommend the AKPM-23 or AKPS-5 keyboard pad for
36′′(914mm)-wide corners.
J
Edgeband
V
Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
188
April 2008 / USA
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Transitional
Left/Right
Depth
Corner, 90В° Notched
Transitional
18′′(457mm)/24′′(610mm)
24′′(610mm)/18′′(457mm)
24"
24′′(610mm)/30′′(762mm)
18"
30′′(762mm)/24′′(610mm)
WUCH-N34
24"
Width
Laminate
Number
(V)
(V)
(T)
(J)
Cascade Cascade
T-Mold Edgeband Group I
Group II
1 2 3
36′′(914mm)
WUCH-3636-L
42′′(1067mm) WUCH-4242-L
48′′(1219mm) WUCH-4848-L
54′′(1372mm) WUCH-5454-L
36′′(914mm)
WUCH-3636-L
42′′(1067mm) WUCH-4242-L
48′′(1219mm) WUCH-4848-L
54′′(1372mm) WUCH-5454-L
36′′(914mm) (1) WUCH-3636-L
42′′(1067mm) WUCH-4242-L
48′′(1219mm) WUCH-4848-L
54′′(1372mm) WUCH-5454-L
36′′(914mm) (1) WUCH-3636-L
42′′(1067mm) WUCH-4242-L
48′′(1219mm) WUCH-4848-L
54′′(1372mm) WUCH-5454-L
N34
N34
N34
N34
N43
N43
N43
N43
N45
N45
N45
N45
N54
N54
N54
N54
$352
386
459
542
$352
386
459
542
$383
417
490
573
$383
417
490
573
$391
429
510
602
$391
429
510
602
$422
460
541
633
$422
460
541
633
$419
459
546
644
$419
459
546
644
N/A
490
577
675
N/A
490
577
675
$446
486
573
671
$446
486
573
671
N/A
517
604
702
N/A
517
604
702
(1)
Cascade edge option not available in these sizes.
WUCH-N43
18"
Features
To Order, Specify:
•
•
•
•
1) Product number.
•
•
•
•
•
Includes worksurface.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edge and 1mm edgeband on
back.
–Cascade (V) user edge and 1mm edgeband on sides and
back.
Worksurfaces predrilled to accept an adjustable keyboard
and most support options.
Optional wireways along back edges are color-matched to
solid side/back edge trim. When wood grain laminate is
specified, wireways will be Charcoal. Refer to Specification
Guide for wireway details.
Installed worksurfaces without wireway will not allow
clearance for power plug.
Depths and widths shown in nominal dimensions.
Available on RUSH with Standard Core.
Specification Tips
• Rear corner bracket is required and must be separately
specified.
• Worksurface support specific to product line; must be
separately specified.
• –Rear corner bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support panel
• –Side brackets
• Recommend the AKPM-23 or AKPS-5 keyboard pad for
36′′(914mm)-wide corners.
T-Mold or Edgeband
2) Laminate surface color.
3) Edge trim color.
Cascade
1) Product number.
2) Laminate surface color.
3) Side/back edgeband trim color.
4) Front Cascade edge trim color.*
*Cascade translucent edge is priced as Group II
1 Edge Options:
T
T-Mold
J
Edgeband
V
Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
189
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Transitional
Left/Right
Depth
Corner, 90В° Angled
Transitional
18′′(457mm)/24′′(610mm)
24′′(610mm)/18′′(457mm)
30"
24"
(Left-hand orientation)
24′′(610mm)/30′′(762mm)
30′′(762mm)/24′′(610mm)
WUCF-N45
30"
24"
(Right-hand orientation)
WUCF-N54
Width
Laminate
Number
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
WUCF-3636-L
WUCF-4242-L
WUCF-4848-L
WUCF-5454-L
WUCF-3636-L
WUCF-4242-L
WUCF-4848-L
WUCF-5454-L
WUCF-3636-L
WUCF-4242-L
WUCF-4848-L
WUCF-5454-L
WUCF-3636-L
WUCF-4242-L
WUCF-4848-L
WUCF-5454-L
1 2 3 4
34
34
34
34
43
43
43
43
45
45
45
45
54
54
54
54
$308
388
462
547
$308
388
462
547
$339
419
493
578
$339
419
493
578
$343
431
513
607
$343
431
513
607
$374
462
544
638
$374
462
544
638
To Order, Specify:
•
•
•
•
1) Product number.
Includes worksurface.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edge and 1mm edgeband on
sides and back.
• Optional wireways along back edges are color-matched to
solid side/back edge trim. When wood grain laminate is
specified, wireways will be Charcoal. Refer to Specification
Guide for wireway details.
• Installed worksurfaces without wireway will not allow
clearance for power plug.
• Depths and widths shown in nominal dimensions.
Specification Tips
• Rear corner bracket is required and must be separately
specified.
• Worksurface support specific to product line; must be
separately specified.
• –Rear corner bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support panel
• –Side brackets
• Recommend the AKPM-23 or AKPS-5 keyboard pad for
36′′(914mm)-wide corners.
• Due to manufacturing restrictions, not available with
Cascade edge.
T-Mold or Edgeband
2) Laminate surface color.
3) Edge trim color.
1 Edge Options:
T
T-Mold
J
Edgeband
2 Core Options:
S
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
4 Orientation (as seated):
R Right-hand
L
April 2008 / USA
(J)
Edgeband
Features
Available on RUSH with Standard Core.
190
(T)
T-Mold
Left-hand
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Corner, 90В° Split Top
Left/Right
Depth
Width
Laminate
Number
24′′(610mm)
30′′(762mm)
48′′(1219mm)
48′′(1219mm)
WUCK-4848-L
WUCK-4848-L
1 2 3
N44
N55
(T)
T-Mold
(J)
Edgeband
(V)
Cascade
Group I
(V)
Cascade
Group II
$1507
$1557
$1711
$1761
$1833
$1883
$1860
$1910
Features
WUCK
To Order, Specify:
• Includes rear worksurface, front worksurface, mechanism,
and tie plate.
• Dual worksurfaces with a 1′′(25mm) space between the front
and rear worksurfaces. Front worksurface is 12′′(305mm)
deep.
• High-pressure laminate with:
• –3mm full perimeter T-mold (T), or
• –3mm edgeband (J) or Cascade (V) edge on front and rear
worksurface front edge, and 1mm on back and side edge of
front and rear worksurface.
• Adjustable front worksurface is attached to the rear
worksurface with a spring-assist mechanism.
• Front worksurface manually adjusts to any position
7′′(178mm) above and 5 3/4′′(146mm) below the rear
worksurface.
• Front worksurface tilts -15° to +9°.
• Spring assist mechanism available in charcoal finish color
only.
• Optional wireway along back edge of worksurface is
color-matched to solid side/back edge trim. When wood grain
edge trim is specified, wireway will be Charcoal.
• Installed worksurfaces without wireway will not allow
clearance for power plug.
• Depths and widths shown in nominal dimensions.
Available on RUSH with Standard Core.
Specification Tips
• Rear corner bracket is required and must be separately
specified.
• Worksurface support specific to product line; must be
separately specified.
• –Rear corner bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support panel
• –Side brackets
• Fixed-height rear worksurface is predrilled to accept standard
cantilever brackets. If using snap-n-fit cantilever on
24′′(610mm) deep worksurfaces, specify snap-n-fit mini
cantilever.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
T-Mold or Edgeband
1) Product number.
2) Laminate surface color.
3) Edge trim color.
Cascade
1) Product number.
2) Laminate surface color.
3) Side/back edgeband trim color.
4) Front Cascade edge trim color.*
*Cascade translucent edge is priced as Group II
1 Edge Options:
T
T-Mold
J
Edgeband
V
Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
April 2008 / USA
191
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Corner, 90В° Wrap-Around
Extended
Features
To Order, Specify:
•
•
•
•
1) Product number.
•
•
24"
•
24"
(Right-hand orientation)
•
WUCE-R44
•
Includes worksurface and tie plate.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edge and 1mm
edgeband on sides and back, or
–Cascade (V) on user edge and 1mm edgeband on
sides and back.
Worksurfaces predrilled to accept most support
options.
Optional wireway along back edge of worksurface is
color-matched to solid side/back edge trim. When
wood grain edge trim is specified, wireway will be
Charcoal. Refer to Specification Guide for wireway
details.
Installed worksurfaces without wireway will not
allow clearance for power plug.
Depths and widths shown in nominal dimensions.
Available on RUSH with Standard Core.
24"
Specification Tips
24"
(Left-hand orientation)
WUCE-L44
• Rear corner bracket is required and must be
separately specified.
• Worksurface support specific to product line;
must be separately specified.
• –Rear corner bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support panel
• –Worksurface support column or leg
• –Side brackets
• –Attached lower storage
• Recommend the AKPM-23 or AKPS-5 keyboard pad
for 36′′(914mm)-wide corners.
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces
with 50′′(1270mm) spans that are heavily loaded and
not otherwise supported by mid-span cantilevers,
worksurface support panels, columns, legs or attached
lower storage.
192
April 2008 / USA
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
T-Mold or Edgeband
2) Laminate surface color.
3) Edge trim color.
Cascade
1) Product number.
2) Laminate surface color.
3) Side/back edgeband trim color.
4) Front Cascade edge trim color.*
*Cascade translucent edge is priced as Group II
1 Edge Options:
T
T-Mold
J
Edgeband
V
Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
4 Orientation (as seated):
R Right-hand
L
Left-hand
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Left/Right
Depth
Width
Corner, 90В° Wrap-Around
Extended
18′′(457mm) 36′′(914mm)
24′′(610mm) 36′′(914mm)
30′′(762mm) 36′′(914mm)
18′′(457mm) 42′′(1067mm)
24′′(610mm) 42′′(1067mm)
30′′(762mm) 42′′(1067mm)
18′′(457mm) 48′′(1219mm)
24′′(610mm) 48′′(1219mm)
30′′(762mm) 48′′(1219mm)
18′′(457mm) 54′′(1372mm)
24′′(610mm) 54′′(1372mm)
30′′(762mm) 54′′(1372mm)
18′′(457mm) 60′′(1524mm)
24′′(610mm) 60′′(1524mm)
30′′(762mm) 60′′(1524mm)
Length
Laminate
Number
42′′(1067mm) WUCE-3642-L
48′′(1219mm) WUCE-3648-L
54′′(1372mm) WUCE-3654-L
60′′(1524mm) WUCE-3660-L
66′′(1676mm) WUCE-3666-L
72′′(1829mm) WUCE-3672-L
42′′(1067mm) WUCE-3642-L
48′′(1219mm) WUCE-3648-L
54′′(1372mm) WUCE-3654-L
60′′(1524mm) WUCE-3660-L
66′′(6764mm) WUCE-3666-L
72′′(1829mm) WUCE-3672-L
42′′(1067mm)(1) WUCE-3642-L
48′′(1219mm)(1) WUCE-3648-L
54′′(1372mm)(1) WUCE-3654-L
60′′(1524mm)(1) WUCE-3660-L
66′′(1676mm)(1) WUCE-3666-L
72′′(1829mm)(1) WUCE-3672-L
48′′(1219mm) WUCE-4248-L
54′′(1372mm) WUCE-4254-L
60′′(1524mm) WUCE-4260-L
66′′(1676mm) WUCE-4266-L
72′′(1829mm) WUCE-4272-L
48′′(1219mm) WUCE-4248-L
54′′(1372mm) WUCE-4254-L
60′′(1524mm) WUCE-4260-L
66′′(1676mm) WUCE-4266-L
72′′(1829mm) WUCE-4272-L
48′′(1067mm) WUCE-4248-L
54′′(1372mm) WUCE-4254-L
60′′(1524mm) WUCE-4260-L
66′′(1676mm) WUCE-4266-L
72′′(1829mm) WUCE-4272-L
54′′(1372mm) WUCE-4854-L
60′′(1524mm) WUCE-4860-L
66′′(1676mm) WUCE-4866-L
72′′(1829mm) WUCE-4872-L
54′′(1372mm) WUCE-4854-L
60′′(1524mm) WUCE-4860-L
66′′(1676mm) WUCE-4866-L
72′′(1829mm) WUCE-4872-L
54′′(1372mm) WUCE-4854-L
60′′(1524mm) WUCE-4860-L
66′′(1676mm) WUCE-4866-L
72′′(1829mm) WUCE-4872-L
60′′(1524mm) WUCE-5460-L
66′′(1676mm) WUCE-5466-L
72′′(1829mm) WUCE-5472-L
60′′(1524mm) WUCE-5460-L
66′′(1676mm) WUCE-5466-L
72′′(1829mm) WUCE-5472-L
60′′(1524mm) WUCE-5460-L
66′′(1676mm) WUCE-5466-L
72′′(1829mm) WUCE-5472-L
66′′(1676mm) WUCE-6066-L
72′′(1829mm) WUCE-6072-L
66′′(1676mm) WUCE-6066-L
72′′(1829mm) WUCE-6072-L
66′′(1676mm) WUCE-6066-L
72′′(1829mm) WUCE-6072-L
(V)
(V)
(T)
(J)
Cascade Cascade
T-Mold Edgeband Group I Group II
1 2 3 4
33
33
33
33
33
33
44
44
44
44
44
44
55
55
55
55
55
55
33
33
33
33
33
44
44
44
44
44
55
55
55
55
55
33
33
33
33
44
44
44
44
55
55
55
55
33
33
33
44
44
44
55
55
55
33
33
44
44
55
55
$596
602
608
614
678
743
$618
624
630
636
700
765
$750
756
762
768
832
897
$609
616
623
689
758
$631
638
645
711
780
$763
770
777
843
912
$627
633
701
770
$649
655
723
792
$781
787
855
924
$647
720
789
$669
742
811
$801
874
943
$737
809
$759
831
$891
963
$ 662
668
674
680
753
826
$ 684
690
696
702
775
848
$ 816
822
828
834
907
980
$ 678
685
692
766
842
$ 700
707
714
788
864
$ 832
839
846
920
996
$ 698
703
779
856
$ 720
725
801
878
$ 852
857
933
1010
$ 719
800
877
$ 741
822
899
$ 873
954
1031
$ 819
899
$ 841
921
$ 973
1053
$ 708
714
720
728
806
884
$ 730
736
742
750
828
906
N/A
N/A
N/A
N/A
N/A
N/A
$ 726
733
740
820
901
$ 748
755
762
842
923
$ 880
887
894
974
1055
$ 747
752
833
916
$ 769
774
855
938
$ 901
906
987
1070
$ 769
856
938
$ 791
878
960
$ 923
1010
1092
$ 876
962
$ 898
984
$1030
1116
$ 735
741
747
755
833
911
$ 757
763
769
777
855
933
N/A
N/A
N/A
N/A
N/A
N/A
$ 753
760
767
847
928
$ 775
782
789
869
950
$ 907
914
921
1001
1082
$ 774
779
860
943
$ 796
801
882
965
$ 928
933
1014
1097
$ 796
883
965
$ 818
905
987
$ 950
1037
1119
$ 903
989
$ 925
1011
$1057
1143
(1)
Cascade edge option not available in these sizes.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
193
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Corner, 90В° Notched
Extended
Features
To Order, Specify:
•
•
•
•
1) Product number.
•
•
24"
•
24"
(Right-hand orientation)
•
WUCP-R44
•
Includes worksurface and tie plate.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edge and 1mm
edgeband on sides and back, or
–Cascade (V) on user edge and 1mm edgeband on
sides and back.
Worksurfaces predrilled to accept most support
options.
Optional wireways along back edges are
color-matched to solid side/back edge trim. When
wood grain laminate is specified, wireways will be
Charcoal. Refer to Specification Guide for wireway
details.
Installed worksurfaces without wireway will not
allow clearance for power plug.
Depths and widths shown in nominal dimensions.
Available on RUSH with Standard Core.
24"
Specification Tips
24"
(Left-hand orientation)
WUCP-L44
• Rear corner bracket is required and must be
separately specified.
• Worksurface support specific to product line;
must be separately specified.
• –Rear corner bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support panel
• –Side brackets
• Recommend the AKPM-23 or AKPS-5 keyboard pad
for 36′′(914mm)-wide corners.
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces
with 50′′(1270mm) spans that are heavily loaded and
not otherwise supported by mid-span cantilevers,
worksurface end panels, legs or attached storage.
T-Mold or Edgeband
2) Laminate surface color.
3) Edge trim color.
Cascade
1) Product number.
2) Laminate surface color.
3) Side/back edgeband trim color.
4) Front Cascade edge trim color.*
*Cascade translucent edge is priced as Group II
1 Edge Options:
T
T-Mold
J
Edgeband
V
Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
4 Orientation (as seated):
R Right-hand
L
194
April 2008 / USA
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
Left-hand
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Left/Right
Depth
Width
Corner, 90В° Notched
Extended
18′′(457mm) 36′′(914mm)
24′′(610mm) 36′′(914mm)
30′′(762mm) 36′′(914mm)
18′′(457mm) 42′′(1067mm)
24′′(610mm) 42′′(1067mm)
30′′(762mm) 42′′(1067mm)
18′′(457mm) 48′′(1219mm)
24′′(610mm) 48′′(1219mm)
30′′(762mm) 48′′(1219mm)
18′′(457mm) 54′′(1372mm)
24′′(610mm) 54′′(1372mm)
30′′(762mm) 54′′(1372mm)
18′′(457mm) 60′′(1524mm)
24′′(610mm) 60′′(1524mm)
30′′(762mm) 60′′(1524mm)
Length
Laminate
Number
42′′(1067mm) WUCP-3642-L
48′′(1219mm) WUCP-3648-L
54′′(1372mm) WUCP-3654-L
60′′(1524mm) WUCP-3660-L
66′′(1676mm) WUCP-3666-L
72′′(1829mm) WUCP-3672-L
42′′(1067mm) WUCP-3642-L
48′′(1219mm) WUCP-3648-L
54′′(1372mm) WUCP-3654-L
60′′(1524mm) WUCP-3660-L
66′′(1676mm) WUCP-3666-L
72′′(1829mm) WUCP-3672-L
42′′(1067mm)(1) WUCP-3642-L
48′′(1219mm)(1) WUCP-3648-L
54′′(1372mm)(1) WUCP-3654-L
60′′(1524mm)(1) WUCP-3660-L
66′′(1676mm)(1) WUCP-3666-L
72′′(1829mm)(1) WUCP-3672-L
48′′(1219mm) WUCP-4248-L
54′′(1372mm) WUCP-4254-L
60′′(1524mm) WUCP-4260-L
66′′(1676mm) WUCP-4266-L
72′′(1829mm) WUCP-4272-L
48′′(1219mm) WUCP-4248-L
54′′(1372mm) WUCP-4254-L
60′′(1524mm) WUCP-4260-L
66′′(1676mm) WUCP-4266-L
72′′(1829mm) WUCP-4272-L
48′′(1219mm) WUCP-4248-L
54′′(1372mm) WUCP-4254-L
60′′(1524mm) WUCP-4260-L
66′′(1676mm) WUCP-4266-L
72′′(1829mm) WUCP-4272-L
54′′(1372mm) WUCP-4854-L
60′′(1524mm) WUCP-4860-L
66′′(1676mm) WUCP-4866-L
72′′(1829mm) WUCP-4872-L
54′′(1372mm) WUCP-4854-L
60′′(1524mm) WUCP-4860-L
66′′(1676mm) WUCP-4866-L
72′′(1829mm) WUCP-4872-L
54′′(1372mm) WUCP-4854-L
60′′(1524mm) WUCP-4860-L
66′′(1676mm) WUCP-4866-L
72′′(1829mm) WUCP-4872-L
60′′(1524mm) WUCP-5460-L
66′′(1676mm) WUCP-5466-L
72′′(1829mm) WUCP-5472-L
60′′(1524mm) WUCP-5460-L
66′′(1676mm) WUCP-5466-L
72′′(1829mm) WUCP-5472-L
60′′(1524mm) WUCP-5460-L
66′′(1676mm) WUCP-5466-L
72′′(1829mm) WUCP-5472-L
66′′(1676mm) WUCP-6066-L
72′′(1829mm) WUCP-6072-L
66′′(1676mm) WUCP-6066-L
72′′(1829mm) WUCP-6072-L
66′′(1676mm) WUCP-6066-L
72′′(1829mm) WUCP-6072-L
(V)
(V)
(T)
(J)
Cascade Cascade
T-Mold Edgeband Group I Group II
1 2 3 4
33
33
33
33
33
33
44
44
44
44
44
44
55
55
55
55
55
55
33
33
33
33
33
44
44
44
44
44
55
55
55
55
55
33
33
33
33
44
44
44
44
55
55
55
55
33
33
33
44
44
44
55
55
55
33
33
44
44
55
55
$606
610
616
622
687
754
$628
632
638
644
709
776
$648
652
658
664
729
796
$620
627
632
699
768
$642
649
654
721
790
$662
669
674
741
810
$638
642
711
782
$660
664
733
804
$680
684
753
824
$657
730
801
$679
752
823
$699
772
843
$747
821
$769
843
$789
863
$672
678
684
691
764
838
$694
700
706
713
786
860
$714
720
726
733
806
880
$689
696
702
777
854
$711
718
724
799
876
$731
738
744
819
896
$708
713
791
869
$730
735
813
891
$750
755
833
911
$730
812
890
$752
834
912
$772
854
932
$831
912
$853
934
$873
954
$ 719
726
732
739
817
897
$ 741
748
754
761
839
919
N/A
N/A
N/A
N/A
N/A
N/A
$ 737
745
751
831
914
$ 759
767
773
853
936
$ 779
787
793
873
956
$ 758
763
846
930
$ 780
785
868
952
$ 800
805
888
972
$ 781
869
952
$ 803
891
974
$ 823
911
994
$ 889
976
$ 911
998
$ 931
1018
$ 746
753
759
766
844
924
$ 768
775
781
788
866
946
N/A
N/A
N/A
N/A
N/A
N/A
$ 764
772
778
858
941
$ 786
794
800
880
963
$ 806
814
820
900
983
$ 785
790
873
957
$ 807
812
895
979
$ 827
832
915
999
$ 808
896
979
$ 830
918
1001
$ 850
938
1021
$ 916
1003
$ 938
1025
$ 958
1045
(1)
Cascade edge option not available in these sizes.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
195
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Corner, 90В° Wrap-Around
Transitional Extended
Features
To Order, Specify:
•
•
•
•
1) Product number.
•
Length
•
Width
24"
•
18"
(Right-hand orientation)
WUCX-R34
•
Length
•
Includes worksurface and tie plate.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edge and 1mm
edgeband on sides and back, or
–Cascade (V) on user edge and 1mm edgeband on
sides and back.
Worksurfaces predrilled to accept most support
options.
Optional wireway along back edges of worksurface is
color-matched to solid side/back edge trim. When
wood grain edge trim laminate is specified, wireway
will be Charcoal. Refer to Specification Guide for
wireway details.
Installed worksurfaces without wireway will not
allow clearance for power plug.
Depths and widths shown in nominal dimensions.
Available on RUSH with Standard Core.
Width
24"
18"
(Left-hand orientation)
WUCX-L43
Specification Tips
• Rear corner bracket is required and must be
separately specified.
• Worksurface support specific to product line;
must be separately specified.
• –Rear corner bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support panel
• –Worksurface support column or leg
• –Side brackets
• –Attached lower storage
• Recommend the AKPM-23 or AKPS-5 keyboard pad
for 36′′(914mm)-wide corners.
• Intermediate support is required for unsupported
worksurface span greater than 60′′(1524mm).
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces
with 50′′(1270mm) spans that are heavily loaded and
not otherwise supported by mid-span cantilevers,
worksurface support panels, columns, legs or attached
lower storage.
196
April 2008 / USA
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
T-Mold or Edgeband
2) Laminate surface color.
3) Edge trim color.
Cascade
1) Product number.
2) Laminate surface color.
3) Side/back edgeband trim color.
4) Front Cascade edge trim color.*
*Cascade translucent edge is priced as Group II
1 Edge Options:
T
T-Mold
J
Edgeband
V
Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
4 Orientation (as seated):
R Right-hand
L
Left-hand
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Left/Right
Depth
Width
Corner, 90В° Wrap-Around
Transitional Extended
18′′(457mm)/ 36′′(914mm)
24′′(66mm)
Length
Laminate
Number
(V)
(V)
(T)
(J)
Cascade Cascade
T-Mold Edgeband Group I Group II
1 2 3 4
42′′(1067mm) WUCX-3642-L
34
$569
$643
$ 700
$ 727
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
42′′(1067mm)
WUCX-3648-L
WUCX-3654-L
WUCX-3660-L
WUCX-3666-L
WUCX-3672-L
WUCX-3642-L
34
34
34
34
34
43
588
649
711
786
859
$569
662
723
785
860
933
$643
719
780
842
917
990
$ 700
746
807
869
944
1017
$ 727
48′′(1219mm) WUCX-3648-L
54′′(1372mm) WUCX-3654-L
60′′(1524mm) WUCX-3660-L
66′′(6764mm) WUCX-3666-L
72′′(1829mm) WUCX-3672-L
42′′(1067mm)(1) WUCX-3642-L
43
43
43
43
43
45
588
649
711
786
859
$579
662
723
785
860
933
$653
719
780
842
917
990
N/A
746
807
869
944
1017
N/A
48′′(1219mm)(1) WUCX-3648-L
54′′(1372mm)(1) WUCX-3654-L
60′′(1524mm)(1) WUCX-3660-L
66′′(6764mm)(1) WUCX-3666-L
72′′(1829mm)(1) WUCX-3672-L
42′′(1067mm)(1) WUCX-3642-L
45
45
45
45
45
54
598
659
721
796
869
$579
672
733
795
870
943
$653
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
48′′(1219mm)(1) WUCX-3648-L
54′′(1372mm)(1) WUCX-3654-L
60′′(1524mm)(1) WUCX-3660-L
66′′(1676mm)(1) WUCX-3666-L
72′′(1829mm)(1) WUCX-3672-L
18′′(457mm)/ 42′′(1067mm) 48′′(1219mm) WUCX-4248-L
24′′(610mm)
54′′(1372mm) WUCX-4254-L
60′′(1524mm) WUCX-4260-L
66′′(1676mm) WUCX-4266-L
72′′(1829mm) WUCX-4272-L
24′′(610mm)/ 42′′(1067mm) 48′′(1219mm) WUCX-4248-L
18′′(457mm)
54′′(1372mm) WUCX-4254-L
60′′(1524mm) WUCX-4260-L
66′′(1676mm) WUCX-4266-L
72′′(1829mm) WUCX-4272-L
24′′(610mm)/ 42′′(1067mm) 48′′(1219mm) WUCX-4248-L
30′′(762mm)
54′′(1372mm) WUCX-4254-L
60′′(1524mm) WUCX-4260-L
66′′(1676mm) WUCX-4266-L
72′′(1829mm) WUCX-4272-L
30′′(762mm)/ 42′′(1067mm) 48′′(1067mm) WUCX-4248-L
24′′(610mm)
54′′(1372mm) WUCX-4254-L
60′′(1524mm) WUCX-4260-L
66′′(1676mm) WUCX-4266-L
72′′(1829mm) WUCX-4272-L
18′′(457mm)/ 48′′(1219mm) 54′′(1372mm) WUCX-4854-L
24′′(610mm)
60′′(1524mm) WUCX-4860-L
66′′(1676mm) WUCX-4866-L
72′′(1829mm) WUCX-4872-L
24′′(610mm)/ 48′′(1219mm) 54′′(1372mm) WUCX-4854-L
18′′(457mm)
60′′(1524mm) WUCX-4860-L
66′′(1676mm) WUCX-4866-L
72′′(1829mm) WUCX-4872-L
24′′(610mm)/ 48′′(1219mm) 54′′(1372mm) WUCX-4854-L
30′′(762mm)
60′′(1524mm) WUCX-4860-L
66′′(1676mm) WUCX-4866-L
72′′(1829mm) WUCX-4872-L
54
54
54
54
54
34
598
659
721
796
869
$628
672
733
795
870
943
$708
N/A
N/A
N/A
N/A
N/A
$ 769
N/A
N/A
N/A
N/A
N/A
$ 796
34
34
34
34
43
649
711
788
832
$628
729
791
868
925
$708
790
852
929
996
$ 769
817
879
956
1023
$ 796
43
43
43
43
45
649
711
788
832
$647
729
791
868
925
$727
790
852
929
996
$ 788
817
879
956
1023
$ 815
45
45
45
45
54
668
730
807
851
$647
748
810
887
944
$727
809
871
948
1015
$ 788
836
898
975
1042
$ 815
54
54
54
54
34
668
730
807
851
$659
748
810
887
944
$746
809
871
948
1015
$ 809
836
898
975
1042
$ 836
34
34
34
43
722
798
860
$659
809
885
962
$746
872
948
1023
$ 809
899
975
1050
$ 836
43
43
43
45
722
798
860
$678
809
885
962
$765
872
948
1023
$ 828
899
975
1050
$ 855
45
45
45
741
817
879
828
904
981
891
967
1042
918
994
1069
24′′(610mm)/ 36′′(914mm)
18′′(457mm)
24′′(610mm)/ 36′′(914mm)
30′′(762mm)
30′′(762mm)/ 36′′(914mm)
24′′(610mm)
(1)
Cascade edge option not available in these sizes.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
197
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Left/Right
Depth
Width
Corner, 90В° Wrap-Around
Transitional Extended
198
April 2008 / USA
Length
30′′(762mm)/ 48′′(1219mm) 54′′(1372mm)
24′′(610mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
18′′(457mm)/ 54′′(1372mm) 60′′(1524mm)
24′′(610mm)
66′′(1676mm)
72′′(1829mm)
24′′(610mm)/ 54′′(1372mm) 60′′(1524mm)
18′′(457mm)
66′′(1676mm)
72′′(1829mm)
24′′(610mm)/ 54′′(1372mm) 60′′(1524mm)
30′′(762mm)
66′′(1676mm)
72′′(1829mm)
30′′(762mm)/ 54′′(1372mm) 60′′(1524mm)
24′′(610mm)
66′′(1676mm)
72′′(1829mm)
18′′(457mm)/ 60′′(1524mm) 66′′(1676mm)
24′′(610mm)
72′′(1829mm)
24′′(610mm)/ 60′′(1524mm) 66′′(1676mm)
18′′(457mm)
72′′(1829mm)
24′′(610mm)/ 60′′(1524mm) 66′′(1676mm)
30′′(762mm)
72′′(1829mm)
30′′(762mm)/ 60′′(1524mm) 66′′(1676mm)
24′′(610mm)
72′′(1829mm)
Laminate
Number
(V)
(V)
(T)
(J)
Cascade Cascade
T-Mold Edgeband Group I Group II
1 2 3 4
WUCX-4854-L
54
$678
$ 765
$ 828
$ 855
WUCX-4860-L
WUCX-4866-L
WUCX-4872-L
WUCX-5460-L
54
54
54
34
741
817
879
$737
828
904
981
$ 831
891
967
1042
$ 896
918
994
1069
$ 923
WUCX-5466-L
WUCX-5472-L
WUCX-5460-L
34
34
43
817
894
$737
911
988
$ 831
976
1053
$ 896
1003
1080
$ 923
WUCX-5466-L
WUCX-5472-L
WUCX-5460-L
43
43
45
817
894
$756
911
988
$ 850
976
1053
$ 915
1003
1080
$ 942
WUCX-5466-L
WUCX-5472-L
WUCX-5460-L
45
45
54
836
913
$756
930
1007
$ 850
995
1072
$ 915
1022
1099
$ 942
WUCX-5466-L
WUCX-5472-L
WUCX-6066-L
54
54
34
836
913
$834
930
1007
$ 935
995
1072
$1003
1022
1099
$1030
WUCX-6072-L
WUCX-6066-L
34
43
915
$834
1016
$ 935
1084
$1003
1111
$1030
WUCX-6072-L
WUCX-6066-L
43
45
915
$853
1016
$ 954
1084
$1022
1111
$1049
WUCX-6072-L
WUCX-6066-L
45
54
934
$853
1035
$ 954
1103
$1022
1130
$1049
WUCX-6072-L
54
934
1035
1103
1130
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Left/Right
Depth
90В° Merger
18′′(457mm)
24′′(610mm)
24"
30′′(762mm)
24"
WUCQ-N44
Width
Laminate
Number
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
WUCQ-3636-L
WUCQ-4242-L
WUCQ-4848-L
WUCQ-5454-L
WUCQ-3636-L
WUCQ-4242-L
WUCQ-4848-L
WUCQ-5454-L
WUCQ-3636-L
WUCQ-4242-L
WUCQ-4848-L
WUCQ-5454-L
1 2 3
N33
N33
N33
N33
N44
N44
N44
N44
N55
N55
N55
N55
(T)
T-Mold
(J)
Edgeband
$359
400
480
563
$373
414
494
577
$445
486
566
649
$399
445
533
625
$413
459
547
639
$485
531
619
711
Features
To Order, Specify:
•
•
•
•
1) Product number.
•
•
•
•
Includes worksurface.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edge and 1mm edgeband on
sides and back.
Worksurfaces predrilled to accept most support options.
Optional wireways along back edges are color-matched to
solid side/back edge trim. When wood grain laminate is
specified, wireways will be Charcoal. Refer to Specification
Guide for wireway details.
Installed worksurfaces without wireway will not allow
clearance for power plug.
Depths and widths shown in nominal dimensions.
Available on RUSH with Standard Core.
Specification Tips
• 90° Merger is suggested alternative to using two
perpendicular rectangular worksurfaces.
• Rear corner bracket is required and must be separately
specified.
• Worksurface support specific to product line; must be
separately specified.
• –Rear corner bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support panel
• –Side brackets
• Not designed for use with an adjustable keyboard pad.
• Due to manufacturing restrictions, not available with
Cascade edge.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
T-Mold or Edgeband
2) Laminate surface color.
3) Edge trim color.
1 Edge Options:
T
T-Mold
J
Edgeband
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
April 2008 / USA
199
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Left/Right
Depth
Corner, 120В° Wrap-Around
18′′(457mm)
24′′(610mm)
24"
24"
30′′(762mm)
WUCZ-N44
Width
Laminate
Number
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
WUCZ-3636-L
WUCZ-4242-L
WUCZ-4848-L
WUCZ-5454-L
WUCZ-6060-L
WUCZ-3636-L
WUCZ-4242-L
WUCZ-4848-L
WUCZ-5454-L
WUCZ-6060-L
WUCZ-3636-L
WUCZ-4242-L
WUCZ-4848-L
WUCZ-5454-L
WUCZ-6060-L
1 2 3
N33
N33
N33
N33
N33
N44
N44
N44
N44
N44
N55
N55
N55
N55
N55
(T)
T-Mold
(J)
Edgeband
(V)
Cascade
Group I
(V)
Cascade
Group II
$487
535
630
674
740
$507
565
664
712
780
$605
665
780
838
920
$ 546
600
707
756
830
$ 566
630
741
794
870
$ 664
730
857
920
1010
$ 588
645
761
813
893
$ 608
675
795
851
933
$ 706
775
911
977
1073
$ 615
672
788
840
920
$ 635
702
822
878
960
$ 733
802
938
1004
1100
Features
To Order, Specify:
•
•
•
•
1) Product number.
•
•
•
•
•
Includes worksurface and tie plate.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edge and 1mm edgeband on
sides and back, or
–Cascade (V) on user edge and 1mm edgeband on sides
and back.
Worksurfaces predrilled to accept most support options.
Optional wireway along back edges of worksurface is
color-matched to solid side/back edge trim. When wood grain
edge trim is specified, wireway will be Charcoal. Refer to
Specification Guide for wireway details.
Installed worksurfaces without wireway will not allow
clearance for power plug.
Depths and widths shown in nominal dimensions.
Available on RUSH with Standard Core.
April 2008 / USA
2) Laminate surface color.
3) Edge trim color.
Cascade
1) Product number.
2) Laminate surface color.
3) Side/back edgeband trim color.
4) Front Cascade edge trim color.*
*Cascade translucent edge is priced as Group II
1 Edge Options:
Specification Tips
T
T-Mold
• Rear corner bracket is required and must be separately
specified.
• Worksurface support specific to product line; must be
separately specified.
• –Rear corner bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support panel
• –Side brackets
• Recommend the AKPM-23 or AKPS-5 keyboard pad for
36′′(914mm)-wide corners.
J
Edgeband
V
Cascade
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces with
50′′(1270mm) spans that are heavily loaded and not otherwise
supported by mid-span cantilevers, worksurface support
panels, columns, legs or attached lower storage.
200
T-Mold or Edgeband
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
D-Shaped Convergent
Width
Length
Laminate
Number
24′′(610mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
WURD-2436-L
WURD-2442-L
WURD-2448-L
WURD-2454-L
WURD-2460-L
WURD-2466-L
WURD-2472-L
WURD-3036-L
WURD-3042-L
WURD-3048-L
WURD-3054-L
WURD-3060-L
WURD-3066-L
WURD-3072-L
WURD-3636-L
WURD-3642-L
WURD-3648-L
WURD-3654-L
WURD-3660-L
WURD-3666-L
WURD-3672-L
30′′(762mm)
36′′(914mm)
WURD
1 2 3
(T)
T-Mold
(J)
Edgeband
(V)
Cascade
Group I
(V)
Cascade
Group II
$199
225
257
292
327
367
406
$206
233
265
302
337
378
418
$213
240
273
311
348
389
431
$222
251
286
325
364
408
451
$230
259
295
336
375
420
465
$237
267
304
346
387
432
479
$238
269
307
348
390
437
483
$247
278
316
360
402
450
498
$254
286
326
371
415
463
513
$265
296
334
375
417
464
510
$274
305
343
387
429
477
525
$281
313
353
398
442
490
540
Features
To Order, Specify:
•
•
•
•
1) Product number.
•
•
•
•
•
•
Includes worksurface and tie plate.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edge and 1mm edgeband on
back (width), or
–Cascade (V) on user edge and 1mm edgeband on back
(width).
Worksurfaces predrilled to accept most support options.
Optional wireway is centered on back edge and is
color-matched to solid side/back edge trim. When wood grain
edge trim is specified, wireway will be Charcoal. Refer to
Specification Guide for wireway details.
Installed worksurfaces without wireway will not allow
clearance for power plug.
Must be attached to a panel or face of a straight
worksurface.
Depths and widths shown in nominal dimensions.
Available on RUSH with Standard Core.
Specification Tips
• Worksurface support specific to product line; must be
separately specified.
• –Column support or leg
• –Straight leg basic
• –Attached lower storage
• In addition to the required floor support, separately specify
the appropriate support options. Select one or more of the
following:
• –Cantilever bracket
• –Worksurface support panel
• –Convergent mount bracket
• –Flush mount plates
• –Side bracket
• For aesthetic reasons, when using Cascade edge or
edgeband edge option, consider specifying D-Shaped
Convergent Wrap-Around.
T-Mold or Edgeband
2) Laminate surface color.
3) Edge trim color.
Cascade
1) Product number.
2) Laminate surface color.
3) Side/back edgeband trim color.
4) Front Cascade edge trim color.*
*Cascade translucent edge is priced as Group II
1 Edge Options:
T
T-Mold
J
Edgeband
V
Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces with
50′′(1270mm) spans that are heavily loaded and not otherwise
supported by mid-span cantilevers, worksurface support
panels, columns, legs or attached lower storage.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
201
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Rectangular Convergent
Width
Length
Laminate
Number
24′′(610mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
WURV-2436-L
WURV-2442-L
WURV-2448-L
WURV-2454-L
WURV-2460-L
WURV-2466-L
WURV-2472-L
WURV-3036-L
WURV-3042-L
WURV-3048-L
WURV-3054-L
WURV-3060-L
WURV-3066-L
WURV-3072-L
WURV-3636-L
WURV-3642-L
WURV-3648-L
WURV-3654-L
WURV-3660-L
WURV-3666-L
WURV-3672-L
30′′(762mm)
36′′(914mm)
WURV
1 2 3
(T)
T-Mold
(J)
Edgeband
(V)
Cascade
Group I
(V)
Cascade
Group II
$199
225
257
292
327
367
406
$206
233
265
302
337
378
418
$213
240
273
311
348
389
431
$222
251
286
325
364
408
451
$230
259
295
336
375
420
465
$237
267
304
346
387
432
479
$238
269
307
348
390
437
483
$247
278
316
360
402
450
498
$254
286
326
371
415
463
513
$265
296
334
375
417
464
510
$274
305
343
387
429
477
525
$281
313
353
398
442
490
540
Features
To Order, Specify:
•
•
•
•
1) Product number.
•
•
•
•
•
•
Includes worksurface and tie plate.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edges and 1mm edgeband on
front and back (width), or
–Cascade (V) on user edges and 1mm edgeband on front
and back (width).
Worksurfaces predrilled to accept most support options.
Optional wireway along back edge of worksurface is
color-matched to solid side/back edge trim. When wood grain
edge trim is specified, wireway will be Charcoal. Refer to
Specification Guide for wireway details.
Installed worksurfaces without wireway will not allow
clearance for power plug.
Must be attached to a panel or face of a straight worksurface.
Depths and widths shown in nominal dimensions.
Available on RUSH with Standard Core.
Specification Tips
• Worksurface support specific to product line; must be
separately specified.
• –Column support or leg
• –Straight leg basic
• –Attached lower storage
• In addition to the required floor support, separately specify
the appropriate support options. Select one or more of the
following:
• –Cantilever bracket
• –Worksurface support panel
• –Convergent mount bracket
• –Flush mount plates
• For aesthetic reasons, when using Cascade edge or
edgeband edge option, consider specifying D-Shaped
Convergent Wrap-Around.
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces with
50′′(1270mm) spans that are heavily loaded and not otherwise
supported by mid-span cantilevers, worksurface support
panels, columns, legs or attached lower storage.
202
April 2008 / USA
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
T-Mold or Edgeband
2) Laminate surface color.
3) Edge trim color.
Cascade
1) Product number.
2) Laminate surface color.
3) Side/back edgeband trim color.
4) Front Cascade edge trim color.*
*Cascade translucent edge is priced as Group II
1 Edge Options:
T
T-Mold
J
Edgeband
V
Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
UniGroup Too Price List
This page intentionally blank
April 2008 / USA
203
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
D-Shaped Convergent,
Wrap-Around
Features
To Order, Specify:
•
•
•
•
1) Product number.
•
•
•
•
•
•
(Right-hand orientation)
•
Includes worksurface and tie plate.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edge and 1mm
edgeband on side and back, or
–Cascade (V) on user edge and 1mm edgeband on
side and back.
Worksurfaces predrilled to accept most support
options.
Optional wireway is centered on back edge and is
color-matched to solid side/back edge trim. When
wood grain or patterned laminate is specified,
wireway will be Charcoal. Refer to Specification
Guide for wireway details.
Installed worksurfaces without wireway will not
allow clearance for power plug.
36′′(914mm)-wide surfaces have a 24′′(610mm)
D-shaped diameter.
42′′(1067mm)- to 60′′(1524mm)-wide surfaces have a
30′′(762mm) D-shaped diameter.
Depths and widths shown in nominal dimensions.
T-Mold or Edgeband
2) Laminate surface color.
3) Edge trim color.
Cascade
1) Product number.
2) Laminate surface color.
3) Side/back edgeband trim color.
4) Front Cascade edge trim color.*
*Cascade translucent edge is priced as Group II
1 Edge Options:
T
T-Mold
J
Edgeband
V
Cascade
Available on RUSH with Standard Core.
Specification Tips
(Left-hand orientation)
WUCD
• Worksurface support specific to product line;
must be separately specified.
• –Worksurface column support or leg
• –Attached lower storage
• In addition to the required floor support, separately
specify the appropriate support options. Select one or
more of the following:
• –Cantilever bracket
• –Worksurface support panel
• –Convergent mount bracket
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces
with 50′′(1270mm) spans that are heavily loaded and
not otherwise supported by mid-span cantilevers,
worksurface support panels, columns, legs
or attached lower storage.
204
April 2008 / USA
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
4 Orientation (as seated):
R Right-hand
L
Left-hand
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Depth
D-Shaped Convergent,
Wrap-Around
Width
18′′(457mm) 36′′(914mm)
24′′(610mm) 36′′(914mm)
30′′(762mm) 36′′(914mm)
18′′(457mm) 42′′(1067mm)
24′′(610mm) 42′′(1067mm)
30′′(762mm) 42′′(1067mm)
18′′(457mm) 48′′(1219mm)
24′′(610mm) 48′′(1219mm)
30′′(762mm) 48′′(1219mm)
18′′(457mm) 54′′(1372mm)
24′′(610mm) 54′′(1372mm)
30′′(762mm) 54′′(1372mm)
18′′(457mm) 60′′(1524mm)
24′′(610mm) 60′′(1524mm)
30′′(762mm) 60′′(1524mm)
Length
Laminate
Number
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
WUCD-3660-L
WUCD-3666-L
WUCD-3672-L
WUCD-3660-L
WUCD-3666-L
WUCD-3672-L
WUCD-3660-L
WUCD-3666-L
WUCD-3672-L
WUCD-4260-L
WUCD-4266-L
WUCD-4272-L
WUCD-4260-L
WUCD-4266-L
WUCD-4272-L
WUCD-4260-L
WUCD-4266-L
WUCD-4272-L
WUCD-4860-L
WUCD-4866-L
WUCD-4872-L
WUCD-4860-L
WUCD-4866-L
WUCD-4872-L
WUCD-4860-L
WUCD-4866-L
WUCD-4872-L
WUCD-5460-L
WUCD-5466-L
WUCD-5472-L
WUCD-5460-L
WUCD-5466-L
WUCD-5472-L
WUCD-5460-L
WUCD-5466-L
WUCD-5472-L
WUCD-6060-L
WUCD-6066-L
WUCD-6072-L
WUCD-6060-L
WUCD-6066-L
WUCD-6072-L
WUCD-6060-L
WUCD-6066-L
WUCD-6072-L
(V)
(V)
(T)
(J)
Cascade Cascade
T-Mold Edgeband Group I Group II
1 2 3 4
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
3
3
3
4
4
4
5
5
5
3
3
3
4
4
4
5
5
5
3
3
3
4
4
4
5
5
5
3
3
3
4
4
4
5
5
5
3
3
3
4
4
4
5
5
5
$678
718
755
$707
747
784
$735
775
812
$694
736
775
$723
765
804
$751
793
832
$714
754
795
$743
783
824
$771
811
852
$731
774
816
$760
803
845
$788
831
873
$749
793
843
$778
822
872
$806
850
900
$753
798
839
$782
827
868
$810
855
896
$772
818
861
$801
847
890
$829
875
918
$794
838
883
$823
867
912
$851
895
940
$813
860
906
$842
889
935
$870
917
963
$833
881
937
$862
910
966
$890
938
994
$ 814
862
908
$ 843
891
937
$ 871
919
965
$ 836
886
933
$ 865
915
962
$ 893
943
990
$ 862
909
958
$ 891
938
987
$ 919
966
1015
$ 883
937
987
$ 912
966
1016
$ 940
994
1044
$ 908
962
1022
$ 937
991
1051
$ 965
1019
1079
$ 841
889
935
$ 870
918
964
$ 898
946
992
$ 863
913
960
$ 892
942
989
$ 920
970
1017
$ 889
936
985
$ 918
965
1014
$ 946
993
1042
$ 910
964
1014
$ 939
993
1043
$ 967
1021
1071
$ 935
989
1049
$ 964
1018
1078
$ 992
1046
1106
April 2008 / USA
205
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
D-Shaped Ender
Depth
Length
Laminate
Number
18′′(457mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
WUDD-1836-L
WUDD-1842-L
WUDD-1848-L
WUDD-1854-L
WUDD-1860-L
WUDD-1866-L
WUDD-1872-L
WUDD-2436-L
WUDD-2442-L
WUDD-2448-L
WUDD-2454-L
WUDD-2460-L
WUDD-2466-L
WUDD-2472-L
WUDD-3036-L
WUDD-3042-L
WUDD-3048-L
WUDD-3054-L
WUDD-3060-L
WUDD-3066-L
WUDD-3072-L
24′′(610mm)
30′′(762mm)
WUDD
1 2
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
(T)
T-Mold
(J)
Edgeband
(V)
Cascade
Group I
(V)
Cascade
Group II
$194
219
249
284
317
356
394
$199
225
257
292
327
367
406
$206
233
265
302
337
378
418
$216
244
277
316
353
396
438
$222
251
286
325
364
408
451
$230
259
295
336
375
420
465
$232
262
297
339
378
424
469
$238
269
307
348
390
437
483
$247
278
316
360
402
450
498
$259
289
324
366
405
451
496
$265
296
334
375
417
464
510
$274
305
343
387
429
477
525
Features
To Order, Specify:
•
•
•
•
1) Product number.
•
•
•
•
Includes worksurface and tie plate.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edge and 1mm edgeband on
back (width), or
–Cascade (V) on user edge and 1mm edgeband on back
(width).
Worksurfaces predrilled to accept most support options.
Must be attached to the depth of adjoining worksurface.
Depths and widths shown in nominal dimensions.
Available on RUSH with Standard Core.
Specification Tips
• Worksurface support specific to product line; must be
separately specified.
• –Worksurface column support or leg
• –Attached lower storage
• In addition to the required floor support, separately specify
the appropriate support options. Select one or more of the
following:
• –Standard link cantilever bracket
• –Worksurface support panel
• –Convergent mount bracket
• –Flush mount plate
• For aesthetic reasons, when using Cascade edge option,
consider specifying D-Shaped Convergent Wrap-Around.
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces with
50′′(1270mm) spans that are heavily loaded and not otherwise
supported by mid-span cantilevers, worksurface support
panels, columns, legs or attached lower storage.
206
April 2008 / USA
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
T-Mold or Edgeband
2) Laminate surface color.
3) Edge trim color.
Cascade
1) Product number.
2) Laminate surface color.
3) Side/back edgeband trim color.
4) Front Cascade edge trim color.*
*Cascade translucent edge is priced as Group II
1 Edge Options:
T
T-Mold
J
Edgeband
V
Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Transitional
Left/Right
Depth
Width
Bent
Length
Width
24"
30"
(Right-hand orientation)
WUCB-R45
Length
Width
24"
30"
(Left-hand orientation)
WUCB-L54
Length
24′′(610mm)/ 24′′(610mm) 36′′(914mm)
30′′(762mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
24′′(610mm)/ 30′′(762mm) 36′′(914mm)
30′′(762mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
30′′(762mm)/ 24′′(610mm) 36′′(914mm)
24′′(610mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
30′′(762mm)/ 30′′(762mm) 36′′(914mm)
24′′(610mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
Laminate
Number
(V)
(V)
(T)
(J)
Cascade Cascade
T-Mold Edgeband Group I Group II
1 2 3
WUCB-2436-L
R45
$506
$563
$602
$ 629
WUCB-2442-L
WUCB-2448-L
WUCB-2460-L
WUCB-3036-L
R45
R45
R45
R45
556
656
770
$598
618
728
856
$664
661
779
916
$710
688
806
943
$ 737
WUCB-3042-L
WUCB-3048-L
WUCB-3060-L
WUCB-2436-L
R45
R45
R45
L54
657
772
827
$506
729
858
919
$563
780
918
983
$602
807
945
1010
$ 629
WUCB-2442-L
WUCB-2448-L
WUCB-2460-L
WUCB-3036-L
L54
L54
L54
L54
556
656
770
$598
618
728
856
$664
661
779
916
$710
688
806
943
$ 737
WUCB-3042-L
WUCB-3048-L
WUCB-3060-L
L54
L54
L54
657
772
827
729
858
919
780
918
983
807
945
1010
Features
To Order, Specify:
•
•
•
•
1) Product number.
•
•
•
•
•
Includes worksurface and tie plate.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edge and 1mm edgeband on
back (width), or
–Cascade (V) on user edge and 1mm edgeband on back
(width).
Worksurfaces predrilled to accept most support options.
Optional wireway along back edge is color-matched to solid
side/back edge trim. When wood grain laminate is specified,
wireways will be Charcoal. Refer to Specification Guide for
wireway details.
Installed worksurfaces without wireway will not allow
clearance for power plug.
Depths and widths shown in nominal dimensions.
Available on RUSH with Standard Core.
T-Mold or Edgeband
2) Laminate surface color.
3) Edge trim color.
Cascade
1) Product number.
2) Laminate surface color.
3) Side/back edgeband trim color.
4) Front Cascade edge trim color.*
*Cascade translucent edge is priced as Group II
1 Edge Options:
Specification Tips
T
T-Mold
• Worksurface support specific to product line; must be
separately specified.
• –Convergent mount bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support column or leg
• –Flush mount plate
J
Edgeband
V
Cascade
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces with
50′′(1270mm) spans that are heavily loaded and not otherwise
supported by mid-span cantilevers, worksurface end panels,
legs or attached storage.
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
207
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Countertop
Depth
Width
Laminate
Number
12′′(305mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
78′′(1981mm)
84′′(2134mm)
90′′(2286mm)
96′′(2438mm)
102′′(2591mm)
108′′(2743mm)
114′′(2896mm)
120′′(3048mm)
WUTS-1224-L
WUTS-1230-L
WUTS-1236-L
WUTS-1242-L
WUTS-1248-L
WUTS-1254-L
WUTS-1260-L
WUTS-1266-L
WUTS-1272-L
WUTS-1278-L
WUTS-1284-L
WUTS-1290-L
WUTS-1296-L
WUTS-12A2-L
WUTS-12A8-L
WUTS-12B4-L
WUTS-12C0-L
WUTS
1 2
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
(T)
T-Mold
(J)
Edgeband
(V)
Cascade
Group I
(V)
Cascade
Group II
$236
252
271
286
303
311
317
330
340
359
375
390
406
419
432
443
453
$263
281
301
318
337
346
353
367
378
397
415
432
450
464
478
490
501
$282
301
323
341
361
371
378
393
405
425
444
462
481
496
511
524
536
$309
328
350
368
388
398
405
420
432
452
471
489
508
523
538
551
563
Features
To Order, Specify:
•
•
•
•
1) Product number.
Includes countertop and tie plate.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edge and 1mm edgeband on
ends, or
• –Cascade (V) on user edges and 1mm edgeband on ends.
• Depths and widths shown in nominal dimensions.
Available on RUSH with Standard Core.
T-Mold or Edgeband
2) Laminate surface color.
3) Edge trim color.
Cascade
1) Product number.
Specification Tips
2) Laminate surface color.
• Requires separately specified mounting hardware.
• For installation on panels 42′′(1067mm)-high or higher.
• For use in applications that match panel width or multiple
panel widths.
3) Side/back edgeband trim color.
4) Front Cascade edge trim color.*
*Cascade translucent edge is priced as Group II
1 Edge Options:
T
T-Mold
J
Edgeband
V
Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
208
April 2008 / USA
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Conference End
Depth
Width
38′′(965mm)
50′′(1270mm)
62′′(1575mm)
30′′(762mm)
WUDC-3830
WUDC-5030
62"
WUDC-6230
(V)
Cascade
Group I
(V)
Cascade
Group II
$424
476
496
$499
529
551
$518
566
589
$545
593
616
To Order, Specify:
1) Product number.
Includes worksurface and tie plate.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edge and 1mm edgeband on
back, or
–Cascade (V) on user edge and 1mm edgeband on back.
Worksurfaces predrilled to accept most support options.
Optional wireway can be specified to accommodate panel
end-of-run trim.
Depths and widths shown in nominal dimensions.
Available on RUSH with Standard Core.
Specification Tips
30"
30"
WUDC-3830-L
WUDC-5030-L
WUDC-6230-L
(J)
Edgeband
•
•
•
•
•
50"
1 2 3
(T)
T-Mold
Features
•
•
•
38"
Laminate
Number
• Designed to be mounted on UniGroup Too, UniGroup and
PLACES.
• Worksurface support specific to product line; must be
separately specified.
• –Support column or leg
• –Worksurface support panel
• –Standard link cantilever bracket.
• –In addition to a column support or leg, two flush mount
plates are required and must be separately specified.
• If using end-of-run finish post specify notched or curved
wireway option.
Note: Grain direction will run across 62′′(1575mm)-wide
conference end worksurface.
T-Mold or Edgeband
2) Laminate surface color.
3) Edge trim color.
Cascade
1) Product number.
2) Laminate surface color.
3) Side/back edgeband trim color.
4) Front Cascade edge trim color.*
*Cascade translucent edge is priced as Group II
1 Edge Options:
T
T-Mold
J
Edgeband
V
Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
209
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
Key Conference End
Depth
Width
Laminate
Number
38′′(965mm)
50′′(1270mm)
30′′(762mm)
30′′(762mm)
36′′(914mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
WURY-3830-L
WURY-5030-L
WURY-5036-L
WURY-6236-L
WURY-6242-L
WURY-6248-L
62′′(1575mm)
WURY-3830
(V)
Cascade
Group I
(V)
Cascade
Group II
$557
$566
573
$578
582
607
$621
$631
639
$644
648
676
$666
$677
685
$691
695
725
$693
$704
712
$718
722
752
To Order, Specify:
•
•
•
•
1) Product number.
•
•
30"
(J)
Edgeband
Features
•
•
•
38"
Depth
1 2 3
(T)
T-Mold
Includes worksurface and tie plate.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edge and 1mm edgeband on
back, or
–Cascade (V) on user edge and 1mm edgeband on back.
Worksurfaces predrilled to accept most support options.
Wireway along back edge is color-matched to solid side/back
edge trim. When wood grain laminate is specified, wireway
will be Charcoal. Refer to Specification Guide for wireway
details.
Depths and widths shown in nominal dimensions.
Wireway required to accommodate end-of-run trim.
Available on RUSH with Standard Core.
Specification Tips
50"
Depth
Width
30"
36"
WURY-5030
WURY-5036
62"
Depth
• Designed to be mounted on UniGroup Too, UniGroup and
PLACES.
• Worksurface support specific to product line; must be
separately specified.
• –Support column or leg
• –Worksurface support panel
• –Standard link cantilever bracket.
• –In addition to a column support or leg, two flush mount
plates are required and must be separately specified.
• If using end-of-run finish post specify notched or curved
wireway option.
Note: Grain direction will run across 62′′(1575mm)-wide
conference end worksurface.
T-Mold or Edgeband
2) Laminate surface color.
3) Edge trim color.
Cascade
1) Product number.
2) Laminate surface color.
3) Side/back edgeband trim color.
4) Front Cascade edge trim color.*
*Cascade translucent edge is priced as Group II
1 Edge Options:
T
T-Mold
J
Edgeband
V
Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
Width
B Curved
C Without
36"
42"
48"
WURY-6236
WURY-6242
WURY-6248
NOTE:
Grain direction for laminate
Key Conference End over
62 ′′(1575mm) deep will be
reversed.
210
April 2008 / USA
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Adaptable Worksurfaces — Laminate
120В° Link
Depth
Laminate
Number
18′′(457mm)
24′′(610mm)
30′′(762mm)
WUDZ-1820-L
WUDZ-2426-L
WUDZ-3032-L
1 2
C
C
C
(T)
T-Mold
(J)
Edgeband
(V)
Cascade
Group I
(V)
Cascade
Group II
$216
241
346
$242
273
375
$261
296
396
$288
323
423
Features
To Order, Specify:
•
•
•
•
1) Product number.
Includes worksurface and tie plate.
High-pressure laminate with:
–Full perimeter T-mold (T), or
–3mm edgeband (J) on user edge and 1mm edgeband on
sides and back, or
• –Cascade (V) on user edge and 1mm edgeband on sides and
back.
• Worksurfaces predrilled to accept most support options.
• Depths and widths shown in nominal dimensions.
Available on RUSH with Standard Core.
T-Mold or Edgeband
2) Laminate surface color.
3) Edge trim color.
Cascade
1) Product number.
2) Laminate surface color.
3) Side/back edgeband trim color.
Specification Tips
WUDZ
• Designed to be mounted on UniGroup Too, UniGroup and
PLACES.
• Support column, leg or worksurface support panel may be
used dependent upon application.
• Use with Corner, 120° Wrap-Around worksurfaces.
• Worksurface support specific to product line; must be
separately specified.
• –Standard link cantilever bracket
• –Tie plates with 18′′(457mm) depth
• –Flush mount plates with 24′′(610mm)-30′′(762mm) depth
4) Front Cascade edge trim color.*
*Cascade translucent edge is priced as Group II
1 Edge Options:
T
T-Mold
J
Edgeband
V
Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
211
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Rectangular
24" x 60"
24" x 72"
WURA-W
Features
• Includes worksurface and tie plate.
• Wood veneer worksurface with:
• –3mm edgeband (K) on user edge and 1mm
edgeband on sides and back, or
• –Cascade (M) on user edge and 1mm edgeband on
sides and back.
• Worksurfaces predrilled to accept most support
options.
• Optional wireway will be Charcoal. Refer to
Specification Guide for wireway details.
• 24′′(607mm)- to 60′′(1524mm)-wide worksurfaces
have one wireway.
• Worksurfaces wider than 60′′(1524mm) have two
wireways.
• Installed worksurfaces without wireway will not
allow clearance for power plug.
• Depths and widths shown in nominal dimensions.
April 2008 / USA
Wood Edgeband or Cascade Wood Edge
1) Product number.
2) Wood finish color.
1 Edge Options:
K Wood Edgeband
M Wood Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
Specification Tips
A Notched
• For additional widths to span a 3-way panel condition,
refer to panel-specific worksurface section.
• Worksurface support specific to product line;
must be separately specified.
• –Cantilever bracket
• –Side brackets
• –Worksurface support panel
• –Worksurface support column or leg
• –Attached lower storage
• Intermediate support is required for unsupported
worksurface span greater than 60′′(1524mm).
B Curved
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces
with 50′′(1270mm) spans that are heavily loaded and
not otherwise supported by mid-span cantilevers,
worksurface support panels, columns, legs or attached
lower storage.
212
To Order, Specify:
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
C Without
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Rectangular
Depth
Width
Wood
Number
18′′(457mm)
24′′(610mm)
26′′(660mm)
30′′(762mm)
32′′(813mm)
36′′(914mm)
38′′(965mm)
42′′(1067mm)
44′′(1118mm)
48′′(1219mm)
50′′(1270mm)
54′′(1372mm)
56′′(1422mm)
60′′(1524mm)
62′′(1575mm)
66′′(1676mm)
68′′(1727mm)
72′′(1829mm)
74′′(1880mm)
78′′(1981mm)
80′′(2032mm)
84′′(2134mm)
86′′(2184mm)
90′′(2286mm)
92′′(2337mm)
96′′(2438mm)
98′′(2489mm)
102′′(2591mm)
104′′(2642mm)
108′′(2743mm)
110′′(2794mm)
114′′(2890mm)
116′′(2946mm)
120′′(3048mm)
24′′(610mm)
26′′(660mm)
30′′(762mm)
32′′(813mm)
36′′(914mm)
38′′(965mm)
42′′(1067mm)
44′′(1118mm)
48′′(1219mm)
50′′(1270mm)
54′′(1372mm)
56′′(1422mm)
60′′(1524mm)
62′′(1575mm)
66′′(1676mm)
68′′(1727mm)
72′′(2429mm)
74′′(1880mm)
78′′(1981mm)
80′′(2032mm)
84′′(2134mm)
86′′(2184mm)
90′′(2286mm)
92′′(2337mm)
96′′(2438mm)
98′′(2489mm)
102′′(2591mm)
104′′(2642mm)
108′′(2743mm)
110′′(2794mm)
114′′(2890mm)
116′′(2946mm)
120′′(3048mm)
WURA-1824-W
WURA-1826-W
WURA-1830-W
WURA-1832-W
WURA-1836-W
WURA-1838-W
WURA-1842-W
WURA-1844-W
WURA-1848-W
WURA-1850-W
WURA-1854-W
WURA-1856-W
WURA-1860-W
WURA-1862-W
WURA-1866-W
WURA-1868-W
WURA-1872-W
WURA-1874-W
WURA-1878-W
WURA-1880-W
WURA-1884-W
WURA-1886-W
WURA-1890-W
WURA-1892-W
WURA-1896-W
WURA-1898-W
WURA-18A2-W
WURA-18A4-W
WURA-18A8-W
WURA-18B0-W
WURA-18B4-W
WURA-18B6-W
WURA-18C0-W
WURA-2424-W
WURA-2426-W
WURA-2430-W
WURA-2432-W
WURA-2436-W
WURA-2438-W
WURA-2442-W
WURA-2444-W
WURA-2448-W
WURA-2450-W
WURA-2454-W
WURA-2456-W
WURA-2460-W
WURA-2462-W
WURA-2466-W
WURA-2468-W
WURA-2472-W
WURA-2474-W
WURA-2478-W
WURA-2480-W
WURA-2484-W
WURA-2486-W
WURA-2490-W
WURA-2492-W
WURA-2496-W
WURA-2498-W
WURA-24A2-W
WURA-24A4-W
WURA-24A8-W
WURA-24B0-W
WURA-24B4-W
WURA-24B6-W
WURA-24C0-W
24′′(610mm)
1 2 3
(K)
Wood
Edgeband
Group I
(K)
Wood
Edgeband
Group II
(M)
Wood
Cascade
Group I
(M)
Wood
Cascade
Group II
$ 358
377
391
414
434
441
448
508
571
592
615
635
659
697
734
769
803
830
858
884
912
938
966
972
994
1046
1069
1089
1109
1131
1151
1171
1181
$ 398
418
434
456
479
502
527
600
673
699
725
751
774
820
864
906
943
966
989
1012
1035
1058
1081
1166
1104
1155
1179
1203
1225
1249
1271
1296
1324
$ 377
396
411
435
456
464
471
534
600
622
664
667
692
732
771
808
843
872
901
928
958
985
1014
1021
1044
1098
1122
1143
1164
1187
1209
1229
1240
$ 418
440
456
479
503
528
554
630
707
734
762
789
813
861
907
951
1018
1043
1038
1063
1087
1111
1135
1224
1159
1213
1238
1263
1286
1311
1334
1361
1390
$ 448
471
489
517
543
551
560
636
714
740
769
794
823
871
918
962
1004
1037
1072
1105
1139
1173
1208
1215
1242
1307
1336
1361
1386
1414
1439
1464
1477
$ 497
523
543
570
598
627
659
750
841
873
907
939
968
1025
1080
1132
1179
1208
1236
1265
1294
1322
1351
1456
1380
1444
1474
1504
1531
1561
1589
1620
1654
$ 467
490
509
538
565
574
583
662
743
770
818
826
856
906
955
1001
1044
1079
1115
1149
1185
1220
1256
1264
1292
1359
1389
1415
1441
1470
1497
1522
1536
$ 517
545
565
593
622
653
686
780
875
908
944
977
1007
1066
1123
1177
1254
1285
1285
1316
1346
1375
1405
1514
1435
1502
1533
1564
1592
1623
1652
1685
1720
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
213
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Rectangular
214
April 2008 / USA
Depth
Width
Wood
Number
30′′(762mm)
24′′(610mm)
26′′(660mm)
30′′(762mm)
32′′(813mm)
36′′(914mm)
38′′(965mm)
42′′(1067mm)
44′′(1118mm)
48′′(1219mm)
50′′(1270mm)
54′′(1372mm)
56′′(1422mm)
60′′(1524mm)
62′′(1575mm)
66′′(1676mm)
68′′(1727mm)
72′′(1829mm)
74′′(1880mm)
78′′(1981mm)
80′′(2032mm)
84′′(2134mm)
86′′(2184mm)
90′′(2286mm)
92′′(2337mm)
96′′(2438mm)
98′′(2489mm)
102′′(2591mm)
104′′(2642mm)
108′′(2743mm)
110′′(2794mm)
114′′(2890mm)
116′′(2946mm)
120′′(3048mm)
WURA-3024-W
WURA-3026-W
WURA-3030-W
WURA-3032-W
WURA-3036-W
WURA-3038-W
WURA-3042-W
WURA-3044-W
WURA-3048-W
WURA-3050-W
WURA-3054-W
WURA-3056-W
WURA-3060-W
WURA-3062-W
WURA-3066-W
WURA-3068-W
WURA-3072-W
WURA-3074-W
WURA-3078-W
WURA-3080-W
WURA-3084-W
WURA-3086-W
WURA-3090-W
WURA-3092-W
WURA-3096-W
WURA-3098-W
WURA-30A2-W
WURA-30A4-W
WURA-30A8-W
WURA-30B0-W
WURA-30B4-W
WURA-30B6-W
WURA-30C0-W
1 2 3
(K)
Wood
Edgeband
Group I
(K)
Wood
Edgeband
Group II
(M)
Wood
Cascade
Group I
(M)
Wood
Cascade
Group II
$ 567
592
619
637
659
675
693
713
755
797
840
884
902
952
1002
1052
1100
1123
1146
1169
1192
1215
1238
1273
1261
1298
1318
1336
1355
1374
1392
1412
1599
$ 596
622
650
669
692
709
728
770
793
837
882
928
947
1000
1052
1105
1188
1179
1238
1227
1251
1276
1300
1335
1324
1363
1384
1402
1422
1442
1461
1482
1670
$ 709
740
774
796
823
844
866
892
944
996
1050
1105
1127
1190
1252
1315
1375
1404
1433
1461
1490
1519
1547
1591
1576
1622
1647
1670
1694
1718
1740
1765
1999
$ 738
770
805
828
856
878
901
949
982
1036
1092
1149
1172
1238
1302
1368
1463
1460
1525
1519
1549
1580
1609
1653
1639
1687
1713
1736
1761
1786
1809
1835
2070
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Rectangular Key
Depth
Width
Wood
Number
30′′(762mm)
36′′(914mm)
48′′(1219mm)
48′′(1219mm)
60′′(1524mm)
72′′(1829mm)
60′′(1524mm)
72′′(1829mm)
60′′(1524mm)
72′′(1829mm)
WURY-3036-W
WURY-3048-W
WURY-3648-W
WURY-3660-W
WURY-3672-W
WURY-4260-W
WURY-4272-W
WURY-4860-W
WURY-4872-W
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
1 2 3
(K)
Wood
Edgeband
Group I
(K)
Wood
Edgeband
Group II
(M)
Wood
Cascade
Group I
(M)
Wood
Cascade
Group II
$1428
1453
$1497
1679
1746
$1756
1826
$1833
1921
$1499
1526
$1572
1763
1833
$1844
1917
$1925
2017
$1739
1816
$1871
2099
2135
$2195
2233
$2272
2401
$1810
1889
$1946
2183
2222
$2283
2324
$2364
2497
Features
WURY-W
To Order, Specify:
• Includes worksurface and tie plate.
• Wood veneer surface with:
• –3mm edgeband (K) on user edge and 1mm edgeband on
sides and back, or
• –Cascade (M) on user edge and 1mm edgeband on sides
and back.
• Worksurface width dimension attaches directly to panel
and matches panel width.
• Worksurfaces predrilled to accept most support options.
• Optional wireways along back edges are Charcoal. Refer to
Specification Guide for wireway details.
• 72′′(1829mm) worksurface has two wireways.
• Installed worksurfaces without wireway will not allow
clearance for power plug.
• Depths and widths shown in nominal dimensions.
• Wireway will accommodate end of run trim.
Specification Tips
• Worksurface support specific to product line; must be
separately specified.
• –Cantilever bracket
• –Side brackets
• –Worksurface support panel
• –Worksurface support column or leg
• –Flush mount plates
• Worksurface support column is required.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
Wood Edgeband or Cascade Wood Edge
1) Product number.
2) Wood finish color.
1 Edge Options:
K Wood Edgeband
M Wood Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
April 2008 / USA
215
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Rectangular Swell
Depth
Swell
Depth
18′′(457mm)
21′′(533mm)
24′′(610mm)
27′′(686mm)
30′′(762mm)
33′′(838mm)
WURS-W
Width
Wood
Number
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
WURS-1824-WK
WURS-1830-WK
WURS-1836-WK
WURS-1842-WK
WURS-1848-WK
WURS-1854-WK
WURS-1860-WK
WURS-2424-WK
WURS-2430-WK
WURS-2436-WK
WURS-2442-WK
WURS-2448-WK
WURS-2454-WK
WURS-2460-WK
WURS-3024-WK
WURS-3030-WK
WURS-3036-WK
WURS-3042-WK
WURS-3048-WK
WURS-3054-WK
WURS-3060-WK
Features
Specification Tips
• Worksurface support specific to product line; must be
separately specified.
• –Cantilever bracket
• –Side brackets
• –Worksurface support panel
• –Worksurface support column or leg
• Suggested pedestal style is mobile.
• Due to manufacturing restrictions, not available with
wood Cascade edge.
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces with
50′′(1270mm) spans that are heavily loaded and not otherwise
supported by mid-span cantilevers, worksurface support
panels, columns, legs or attached lower storage.
April 2008 / USA
(K)
Wood
Edgeband
Group II
$486
490
498
531
675
727
778
$502
508
516
550
701
755
807
$659
665
671
707
780
853
924
$511
515
523
558
709
764
817
$528
534
542
578
736
793
848
$692
699
705
743
819
896
970
To Order, Specify:
• Includes worksurface and tie plate.
• Wood veneer worksurface with:
• –3mm edgeband (K) on user edge and 1mm edgeband on
sides and back.
• Worksurfaces predrilled to accept most support options.
• Optional wireway will be Charcoal. Refer to Specification
Guide for wireway details.
• Installed worksurfaces without wireway will not allow
clearance for power plug.
• Depths and widths shown in nominal dimensions.
216
1 2
(K)
Wood
Edgeband
Group I
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
Wood Edgeband
1) Product number.
2) Wood finish color.
1 Core Options:
S
Standard
G Green, add $94 list.
2 Wireway Options:
A Notched
B Curved
C Without
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Rectangular Inverse Swell
Depth
Swell
Depth
18′′(457mm)
15′′(381mm)
24′′(610mm)
21′′(533mm)
30′′(762mm)
27′′(686mm)
WURW-W
Width
Wood
Number
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
WURW-1824-WK
WURW-1830-WK
WURW-1836-WK
WURW-1842-WK
WURW-1848-WK
WURW-1854-WK
WURW-1860-WK
WURW-2424-WK
WURW-2430-WK
WURW-2436-WK
WURW-2442-WK
WURW-2448-WK
WURW-2454-WK
WURW-2460-WK
WURW-3024-WK
WURW-3030-WK
WURW-3036-WK
WURW-3042-WK
WURW-3048-WK
WURW-3054-WK
WURW-3060-WK
Features
1 2
(K)
Wood
Edgeband
Group I
(K)
Wood
Edgeband
Group II
$486
490
498
531
675
727
778
$502
508
516
550
701
755
807
$659
665
671
707
780
853
924
$511
515
523
558
709
764
817
$528
534
542
578
736
793
848
$692
699
705
743
819
896
970
To Order, Specify:
• Includes worksurface and tie plate.
• Wood veneer worksurface with:
• –3mm edgeband (K) on user edge and 1mm edgeband on
sides and back.
• Worksurfaces predrilled to accept most support options.
• Optional wireway will be Charcoal. Refer to Specification
Guide for wireway details.
• Installed worksurfaces without wireway will not allow
clearance for power plug.
• Depths and widths shown in nominal dimensions.
Specification Tips
• Worksurface support specific to product line; must be
separately specified.
• –Cantilever bracket
• –Side brackets
• –Worksurface support panel
• –Worksurface support column or leg
• Suggested pedestal style is mobile.
• Due to manufacturing restrictions, not available with
wood Cascade edge.
Wood Edgeband
1) Product number.
2) Wood finish color.
1 Core Options:
S
Standard
G Green, add $94 list.
2 Wireway Options:
A Notched
B Curved
C Without
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces with
50′′(1270mm) spans that are heavily loaded and not otherwise
supported by mid-span cantilevers, worksurface support
panels, columns, legs or attached lower storage.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
217
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Left/Right
Depth
Rectangular Transition
24"
18"
WURT-WN43
18"
24"
WURT-WN34
Width
18′′(457mm)/24′′(610mm) 24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
24′′(610mm)/18′′(457mm) 24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
24′′(610mm)/30′′(762mm) 24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
30′′(762mm)/24′′(610mm) 24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
Wood
Number
1 2 3
WURT-2424-W
WURT-2430-W
WURT-2436-W
WURT-2442-W
WURT-2448-W
WURT-2454-W
WURT-2460-W
WURT-2424-W
WURT-2430-W
WURT-2436-W
WURT-2442-W
WURT-2448-W
WURT-2454-W
WURT-2460-W
WURT-3024-W
WURT-3030-W
WURT-3036-W
WURT-3042-W
WURT-3048-W
WURT-3054-W
WURT-3060-W
WURT-3024-W
WURT-3030-W
WURT-3036-W
WURT-3042-W
WURT-3048-W
WURT-3054-W
WURT-3060-W
N34
N34
N34
N34
N34
N34
N34
N43
N43
N43
N43
N43
N43
N43
N45
N45
N45
N45
N45
N45
N45
N54
N54
N54
N54
N54
N54
N54
Features
Specification Tips
• Worksurface support specific to product line; must be
separately specified.
• –Cantilever bracket
• –Side brackets
• –Worksurface support panel
• –Worksurface support column or leg
• –Attached lower storage
• For worksurfaces less than 42′′(1067mm) wide, suggested
pedestal style is mobile.
• For worksurfaces greater than 42′′(1067mm) wide, attached
pedestal may be installed on deepest side.
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces with
50′′(1270mm) spans that are heavily loaded and not otherwise
supported by mid-span cantilevers, worksurface support
panels, columns, legs or attached lower storage.
April 2008 / USA
(K)
Wood
Edgeband
Group II
(M)
Wood
Cascade
Group I
(M)
Wood
Cascade
Group II
$535
582
627
673
791
855
918
$535
582
627
673
791
855
918
$554
602
651
699
819
886
951
$554
602
651
699
819
886
951
$562
611
659
707
831
898
964
$562
611
659
707
831
898
964
$582
633
684
734
860
930
999
$582
633
684
734
860
930
999
$ 669
727
784
841
989
1069
1148
$ 669
727
784
841
989
1069
1148
$ 693
753
814
873
1024
1107
1189
$ 693
753
814
873
1024
1107
1189
$ 696
756
816
875
1029
1112
1194
$ 696
756
816
875
1029
1112
1194
$ 721
784
847
908
1065
1151
1237
$ 721
784
847
908
1065
1151
1237
To Order, Specify:
• Includes worksurface and tie plate.
• Wood veneer worksurface with:
• –3mm edgeband (K) on user edge and 1mm edgeband on
sides and back, or
• –Cascade (M) on user edge and 1mm edgeband on sides
and back.
• Worksurfaces predrilled to accept most support options.
• Optional wireway will be Charcoal. Refer to Specification
Guide for wireway details.
• Installed worksurfaces without wireway will not allow
clearance for power plug.
• Depths and widths shown in nominal dimensions.
218
(K)
Wood
Edgeband
Group I
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
Wood Edgeband or Cascade Wood Edge
1) Product number.
2) Wood finish color.
1 Edge Options:
K Wood Edgeband
M Wood Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Transitional
Depth
Wedge
18"
24"
WURE-WN34
24"
WURE-WN43
18"
Width
24′′(610mm)/18′′(457mm) 24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
18′′(457mm)/24′′(610mm) 24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
30′′(762mm)/24′′(610mm) 24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
24′′(610mm)/30′′(762mm) 24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
Wood
Number
1 2 3
WURE-2424-W
WURE-2430-W
WURE-2436-W
WURE-2442-W
WURE-2448-W
WURE-2454-W
WURE-2460-W
WURE-2424-W
WURE-2430-W
WURE-2436-W
WURE-2442-W
WURE-2448-W
WURE-2454-W
WURE-2460-W
WURE-3024-W
WURE-3030-W
WURE-3036-W
WURE-3042-W
WURE-3048-W
WURE-3054-W
WURE-3060-W
WURE-3024-W
WURE-3030-W
WURE-3036-W
WURE-3042-W
WURE-3048-W
WURE-3054-W
WURE-3060-W
N43
N43
N43
N43
N43
N43
N43
N34
N34
N34
N34
N34
N34
N34
N54
N54
N54
N54
N54
N54
N54
N45
N45
N45
N45
N45
N45
N45
Features
(K)
Wood
Edgeband
Group I
(K)
Wood
Edgeband
Group II
(M)
Wood
Cascade
Group I
(M)
Wood
Cascade
Group II
$545
594
639
686
807
872
936
$545
594
639
686
807
872
936
$565
615
663
713
836
904
970
$565
615
663
713
836
904
970
$ 559
609
655
703
827
894
1011
$ 559
609
655
703
827
894
1011
$ 580
631
680
731
857
927
994
$ 580
631
680
731
857
927
994
$ 682
743
799
857
1009
1090
1171
$ 682
743
799
857
1009
1090
1171
$ 707
769
829
892
1045
1130
1213
$ 707
769
829
892
1045
1130
1213
$ 696
758
815
874
1029
1112
1246
$ 696
758
815
874
1029
1112
1246
$ 722
785
846
910
1066
1153
1237
$ 722
785
846
910
1066
1153
1237
To Order, Specify:
• Includes worksurface and tie plate.
• Wood veneer surface with:
• –3mm edgeband (K) on user edge and 1mm edgeband on
sides and back.
• –Cascade (M) on user edge and 1mm edgeband on sides
and back.
• Worksurfaces predrilled to accept most support options.
• Optional wireways along back edges are Charcoal. Refer to
Specification Guide for wireway details.
• Installed worksurfaces without wireway will not allow
clearance for power plug.
• Depths and widths shown in nominal dimensions.
Specification Tips
• Worksurface support specific to product line; must be
separately specified.
• –Cantilever bracket
• –Side brackets
• –Worksurface support panel
• –Worksurface support column or leg
• Suggested pedestal style is mobile.
Wood Edgeband
1) Product number.
2) Wood finish color.
1 Edge Options:
K Wood Edgeband
M Wood Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces with
50′′(1270mm) spans that are heavily loaded and not otherwise
supported by mid-span cantilevers, worksurface end panels,
posts or attached lower storage.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
219
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Rectangular Radius End
(Right-hand orientation)
Depth
Width
Wood
Number
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
WURR-1824-W
WURR-1830-W
WURR-1836-W
WURR-1842-W
WURR-1848-W
WURR-1854-W
WURR-1860-W
WURR-2424-W
WURR-2430-W
WURR-2436-W
WURR-2442-W
WURR-2448-W
WURR-2454-W
WURR-2460-W
WURR-3024-W
WURR-3030-W
WURR-3036-W
WURR-3042-W
WURR-3048-W
WURR-3054-W
WURR-3060-W
24′′(610mm)
(Left-hand orientation)
WURR-W
30′′(762mm)
1 2 3 4
(K)
Wood
Edgeband
Group I
(K)
Wood
Edgeband
Group II
(M)
Wood
Cascade
Group I
(M)
Wood
Cascade
Group II
$471
484
535
592
753
809
866
$486
498
553
610
776
834
893
$701
715
755
800
866
924
983
$ 495
509
562
622
791
850
909
$ 511
523
581
641
815
876
938
$ 736
751
793
840
909
970
1032
$ 588
604
669
740
942
1011
1082
$ 607
622
691
762
970
1042
1116
$ 876
894
944
1000
1082
1156
1229
$ 612
629
696
770
980
1052
1125
$ 632
647
719
793
1009
1084
1161
$ 911
930
982
1040
1125
1202
1278
Features
To Order, Specify:
• Includes worksurface and tie plate.
• Wood veneer worksurface with:
• –3mm edgeband (K) on user edge and 1mm edgeband on
side and back, or
• –Cascade (M) on user edge and 1mm edgeband on side and
back.
• Worksurfaces predrilled to accept most support options.
• Optional wireway will be Charcoal. Refer to Specification
Guide for wireway details.
• Installed worksurfaces without wireway will not allow
clearance for power plug.
• Depths and widths shown in nominal dimensions.
Specification Tips
• Worksurface support specific to product line; must be
separately specified.
• –Cantilever bracket
• –Side brackets
• –Worksurface support panel
• –Worksurface support column or leg
• –Attached lower storage (for worksurfaces greater than 36′′
wide)
• For edgeband:
• –18′′(457mm) and 24′′(610mm) specify the standard mini
cantilever bracket for radius end.
• –30′′(762mm) specify standard cantilever bracket for radius
end.
• When using snap-n-fit cantilevers 18′′(457mm) and
24′′(610mm) requires mini snap-n-fit cantilever, 30′′(762mm)
requires standard snap-n-fit cantilever.
• For Cascade edge, for aesthetic reasons, use:
• –Side bracket and column support or leg.
• For worksurfaces less than 42′′(1067mm) wide, suggested
pedestal style is mobile.
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces with
50′′(1270mm) spans that are heavily loaded and not otherwise
supported by mid-span cantilevers, worksurface support
panels, columns, legs or attached lower storage.
220
April 2008 / USA
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
Wood Edgeband or Cascade Wood Edge
1) Product number.
2) Wood finish color.
1 Edge Options:
K Wood Edgeband
M Wood Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
4 Orientation (as seated):
R Right-hand
L
Left-hand
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Rectangular — Split Top
Depth
Width
Wood
Number
24′′(610mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
WURK-2436-W
WURK-2442-W
WURK-2448-W
WURK-3036-W
WURK-3042-W
WURK-3048-W
30′′(762mm)
1 2 3
(K)
Wood
Edgeband
Group I
(K)
Wood
Edgeband
Group II
(M)
Wood
Cascade
Group I
(M)
Wood
Cascade
Group II
$2959
3080
3195
$3113
3234
3350
$3107
3234
3355
$3269
3396
3517
$3699
3850
3994
$3891
4043
4187
$3847
4004
4154
$4047
4205
4354
Features
WURK-W
To Order, Specify:
• Includes rear worksurface, front worksurface, mechanism and
tie plate.
• Dual worksurfaces with a 1′′(25mm) space between the front
and rear worksurfaces. Front worksurface is 12′′(305mm)
deep.
• Wood veneer worksurface with:
• –3mm edgeband (K) or Cascade (M) edge on front and rear
worksurface front edge, and 1mm on back and side edge of
front and rear worksurface.
• Adjustable front worksurface is attached to the rear
worksurface with a spring-assist mechanism.
• Front worksurface manually adjusts to any position
7′′(178mm) above and 5 3/4′′(146mm) below the rear
worksurface.
• Front worksurface tilts -15° to +9°.
• Spring assist mechanism available in charcoal finish color
only.
• Optional wireway will be Charcoal.
• Installed worksurfaces without wireway will not allow
clearance for power plug.
• Depths and widths shown in nominal dimensions.
Wood Edgeband or Cascade Wood Edge
1) Product number.
2) Wood finish color.
1 Edge Options:
K Wood Edgeband
M Wood Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
Specification Tip
• Fixed-height rear worksurface is predrilled to accept standard
cantilever brackets. If using snap-n-fit cantilever on
24′′(610mm) deep worksurfaces, specify snap-n-fit mini
cantilever.
• Worksurface support specific to product line; must be
separately specified.
• –Cantilever bracket
• –Side brackets
• –Worksurface support panel
• –Worksurface support column or leg
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
221
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Left/Right
Depth
Corner, 90В° Straight Front
18′′(457mm)
24′′(610mm)
30′′(762mm)
Width
Wood
Number
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
WUCA-3636-WK
WUCA-4242-WK
WUCA-4848-WK
WUCA-3636-WK
WUCA-4242-WK
WUCA-4848-WK
WUCA-3636-WK
WUCA-4242-WK
WUCA-4848-WK
1 2
Features
Specification Tips
• Rear corner bracket is required and must be separately
specified.
• Worksurface support specific to product line; must be
separately specified.
• –Rear corner bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support panel
• –Side brackets
• Recommend the AKPM-23 or AKPS-5 keyboard pad for
36′′(914mm)-wide corners.
• Due to manufacturing restrictions, not available with
wood Cascade edge.
222
April 2008 / USA
(K)
Wood
Edgeband
Group II
$619
680
806
$633
694
820
$705
766
892
$651
715
847
$665
729
861
$737
801
933
To Order, Specify:
• Includes worksurface and tie plate.
• Wood veneer worksurface with:
• –3mm edgeband (K) on user edge and 1mm edgeband on
sides and back.
• Worksurfaces predrilled to accept most support options.
• Optional wireway will be Charcoal.
• Installed worksurfaces without wireway will not allow
clearance for power plug.
• Depths and widths shown in nominal dimensions.
WUCA-W
N33
N33
N33
N44
N44
N44
N55
N55
N55
(K)
Wood
Edgeband
Group I
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
Wood Edgeband
1) Product number.
2) Wood finish color.
1 Core Options:
S
Standard
G Green, add $94 list.
2 Wireway Options:
A Notched
B Curved
C Without
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Left/Right
Depth
Corner, 90В° Wrap-Around
WUCR-W
Width
18′′(457mm)
Wood
Number
36′′(914mm)
WUCR-3636-W
42′′(1067mm)
WUCR-4242-W
48′′(1219mm)
WUCR-4848-W
24′′(610mm)
36′′(914mm)
WUCR-3636-W
42′′(1067mm)
WUCR-4242-W
48′′(1219mm)
WUCR-4848-W
30′′(762mm)
36′′(914mm) (1) WUCR-3636-W
42′′(1067mm)
WUCR-4242-W
48′′(1219mm)
WUCR-4848-W
(1)
Cascade edge option not available in this size.
1 2 3
N33
N33
N33
N44
N44
N44
N55
N55
N55
(K)
Wood
Edgeband
Group I
(K)
Wood
Edgeband
Group II
(M)
Wood
Cascade
Group I
(M)
Wood
Cascade
Group II
$600
659
780
$614
673
794
$686
745
866
$632
694
821
$646
708
835
$718
780
907
$ 758
832
984
$ 772
846
998
N/A
918
1070
$ 790
867
1025
$ 804
881
1039
N/A
953
1111
Features
To Order, Specify:
• Includes worksurface.
• Wood veneer worksurface with:
• –3mm edgeband (K) on user edge and 1mm edgeband on
sides and back, or
• –Cascade (M) on user edge and 1mm edgeband on sides
and back.
• Worksurfaces predrilled to accept most support options.
• Optional wireway will be Charcoal. Refer to Specification
Guide for wireway details.
• Installed worksurfaces without wireway will not allow
clearance for power plug.
• Depths and widths shown in nominal dimensions.
Specification Tips
• Rear corner bracket is required and must be separately
specified.
• Worksurface support specific to product line; must be
separately specified.
• –Rear corner bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support panel
• –Side brackets
• Recommend the AKPM-23 or AKPS-5 keyboard pad for
36′′(914mm)-wide corners.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
Wood Edgeband or Cascade Wood Edge
1) Product number.
2) Wood finish color.
1 Edge Options:
K Wood Edgeband
M Wood Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
April 2008 / USA
223
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Left/Right
Depth
Corner, 90В° Notched
Width
18′′(457mm)
Wood
Number
36′′(914mm)
WUCN-3636-W
42′′(1067mm)
WUCN-4242-W
48′′(1219mm)
WUCN-4848-W
24′′(610mm)
36′′(914mm)
WUCN-3636-W
42′′(1067mm)
WUCN-4242-W
48′′(1219mm)
WUCN-4848-W
30′′(762mm)
36′′(914mm) (1) WUCN-3636-W
42′′(1067mm)
WUCN-4242-W
48′′(1219mm)
WUCN-4848-W
(1)
Cascade edge option not available in this size.
1 2 3
N33
N33
N33
N44
N44
N44
N55
N55
N55
(K)
Wood
Edgeband
Group I
(K)
Wood
Edgeband
Group II
(M)
Wood
Cascade
Group I
(M)
Wood
Cascade
Group II
$608
680
816
$622
694
830
$634
706
842
$629
703
843
$643
717
857
$655
729
869
$ 760
850
1020
$ 774
864
1034
N/A
876
1046
$ 781
873
1047
$ 795
887
1061
N/A
899
1073
Features
WUCN-W
To Order, Specify:
• Includes worksurface and tie plate.
• Wood veneer surface with:
• –3mm edgeband (K) on user edge and 1mm edgeband on
sides and back.
• –Cascade (M) on user edge and 1mm edgeband on sides
and back.
• Worksurfaces predrilled to accept most support options.
• Optional wireways along back edges are Charcoal. Refer to
Specification Guide for wireway details.
• Installed worksurfaces without wireway will not allow
clearance for power plug.
• Depths and widths shown in nominal dimensions.
Specification Tips
• Rear corner bracket is required and must be separately
specified.
• Worksurface support specific to product line; must be
separately specified.
• –Rear corner bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support panel
• –Side brackets
• Recommend the AKPM-23 or AKPS-5 keyboard pad for
36′′(914mm)-wide corners.
224
April 2008 / USA
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
Wood Edgeband or Cascade Wood Edge
1) Product number.
2) Wood finish color.
1 Edge Options:
K Wood Edge Band
M Wood Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Left/Right
Depth
Corner, 90В° Angled
18′′(457mm)
24′′(610mm)
30′′(762mm)
Width
Wood
Number
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
WUCU-3636-WK
WUCU-4242-WK
WUCU-4848-WK
WUCU-3636-WK
WUCU-4242-WK
WUCU-4848-WK
WUCU-3636-WK
WUCU-4242-WK
WUCU-4848-WK
1 2 3
Features
(Left-hand orientation)
(Right-hand orientation)
WUCU-W
33
33
33
44
44
44
55
55
55
(K)
Wood
Edgeband
Group I
(K)
Wood
Edgeband
Group II
$603
684
820
$617
698
834
$629
710
846
$626
707
847
$640
721
861
$652
733
873
To Order, Specify:
• Includes worksurface and tie plate.
• Wood veneer surface with:
• –3mm edgeband (K) on user edge and 1mm edgeband on
sides and back.
• Optional wireways along back edges are Charcoal. Refer to
Specification Guide for wireway details.
• Installed worksurfaces without wireway will not allow
clearance for power plug.
• Depths and widths shown in nominal dimensions.
Specification Tips
• Rear corner bracket is required and must be separately
specified.
• Worksurface support specific to product line; must be
separately specified.
• –Rear corner bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support panel
• –Side brackets
• Recommend the AKPM-23 or AKPS-5 keyboard pad for
36′′(914mm)-wide corners.
• Due to manufacturing restrictions, not available with
wood Cascade edge.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
Wood Edgeband
1) Product number.
2) Wood finish color.
1 Core Options:
S
Standard
G Green, add $94 list.
2 Wireway Options:
A Notched
B Curved
C Without
3 Orientation (as seated):
R Right-hand
L
Left-hand
April 2008 / USA
225
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Left/Right
Depth
Corner, 90В° Wrap-Around
Transitional
24"
18"
WUCT-WN34
Width
Wood
Number
1 2 3
18′′(457mm)/24′′(610mm) 36′′(914mm) WUCT-3636-W
42′′(1067mm) WUCT-4242-W
48′′(1219mm) WUCT-4848-W
24′′(610mm)/18′′(457mm) 36′′(914mm) WUCT-3636-W
42′′(1067mm) WUCT-4242-W
48′′(1219mm) WUCT-4848-W
24′′(610mm)/30′′(762mm) 36′′(914mm) (1) WUCT-3636-W
42′′(1067mm) WUCT-4242-W
48′′(1219mm) WUCT-4848-W
30′′(762mm)/24′′(610mm) 36′′(914mm) (1) WUCT-3636-W
42′′(1067mm) WUCT-4242-W
48′′(1219mm) WUCT-4848-W
(1)
Cascade edge option not available in these sizes.
N34
N34
N34
N43
N43
N43
N45
N45
N45
N54
N54
N54
Features
24"
18"
WUCT-WN43
• Rear corner bracket is required and must be separately
specified.
• Worksurface support specific to product line; must be
separately specified.
• –Rear corner bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support panel
• –Side brackets
• Recommend the AKPM-23 or AKPS-5 keyboard pad for
36′′(914mm)-wide corners.
April 2008 / USA
(K)
Wood
Edgeband
Group II
(M)
Wood
Cascade
Group I
(M)
Wood
Cascade
Group II
$587
643
764
$587
643
764
$655
720
854
$655
720
854
$619
678
805
$619
678
805
$687
755
895
$687
755
895
$ 743
813
966
$ 743
813
966
N/A
890
1056
N/A
890
1056
$ 775
848
1007
$ 775
848
1007
N/A
925
1097
N/A
925
1097
To Order, Specify:
• Includes worksurface.
• Wood veneer worksurface with:
• –3mm edgeband (K) on user edge and 1mm edgeband on
sides and back, or
• –Cascade (M) on user edge and 1mm edgeband on sides
and back.
• Worksurfaces predrilled to accept most support options.
• Optional wireway will be Charcoal. Refer to Specification
Guide for wireway details.
• Installed worksurfaces without wireway will not allow
clearance for power plug.
• Depths and widths shown in nominal dimensions.
Specification Tips
226
(K)
Wood
Edgeband
Group I
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
Wood Edgeband or Cascade Wood Edge
1) Product number.
2) Wood finish color.
1 Edge Options:
K Wood Edgeband
M Wood Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Transitional
Left/Right
Depth
Corner, 90В° Notched
Transitional
24"
18"
WUCH-WN34
Width
Wood
Number
1 2 3
18′′(457mm)/24′′(610mm) 36′′(914mm) WUCH-3636-W
42′′(1067mm) WUCH-4242-W
48′′(1219mm) WUCH-4848-W
24′′(610mm)/18′′(457mm) 36′′(914mm) WUCH-3636-W
42′′(1067mm) WUCH-4242-W
48′′(1219mm) WUCH-4848-W
24′′(610mm)/30′′(762mm) 36′′(914mm) (1) WUCH-3636-W
42′′(1067mm) WUCH-4242-W
48′′(1219mm) WUCH-4848-W
30′′(762mm)/24′′(610mm) 36′′(914mm) (1) WUCH-3636-W
42′′(1067mm) WUCH-4242-W
48′′(1219mm) WUCH-4848-W
(1)
Cascade edge option not available in these sizes.
N34
N34
N34
N43
N43
N43
N45
N45
N45
N54
N54
N54
Features
24"
WUCH-WN43
18"
(K)
Wood
Edgeband
Group I
(K)
Wood
Edgeband
Group II
(M)
Wood
Cascade
Group I
(M)
Wood
Cascade
Group II
$594
652
775
$594
652
775
$625
683
806
$625
683
806
$614
674
801
$614
674
801
$645
705
832
$645
705
832
$ 743
824
969
$ 743
824
969
N/A
855
1000
N/A
855
1000
$ 763
846
995
$ 763
846
995
N/A
877
1026
N/A
877
1026
To Order, Specify:
• Includes worksurface and tie plate.
• Wood veneer surface with:
• –3mm edgeband (K) on user edge and 1mm edgeband on
sides and back, or
• –Cascade (M) on user edge and 1mm edgeband on sides
and back.
• Worksurfaces predrilled to accept most support options.
• Optional wireways along back edges are Charcoal. Refer to
Specification Guide for wireway details.
• Installed worksurfaces without wireway will not allow
clearance for power plug.
• Depths and widths shown in nominal dimensions.
Specification Tips
• Rear corner bracket is required and must be separately
specified.
• Worksurface support specific to product line; must be
separately specified.
• –Rear corner bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support panel
• –Side brackets
• Recommend the AKPM-23 or AKPS-5 keyboard pad for
36′′(914mm)-wide corners.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
Wood Edgeband or Cascade Wood Edge
1) Product number.
2) Wood finish color.
1 Edge Options:
K Wood Edgeband
M Wood Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
April 2008 / USA
227
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Transitional
Left/Right
Depth
Corner, 90В° Angled
Transitional
18′′(457mm)/24′′(610mm)
24′′(610mm)/18′′(457mm)
24′′(610mm)/30′′(762mm)
30"
30′′(762mm)/24′′(610mm)
24"
Width
Wood
Number
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
WUCF-3636-WK
WUCF-4242-WK
WUCF-4848-WK
WUCF-3636-WK
WUCF-4242-WK
WUCF-4848-WK
WUCF-3636-WK
WUCF-4242-WK
WUCF-4848-WK
WUCF-3636-WK
WUCF-4242-WK
WUCF-4848-WK
(Left-hand orientation)
Features
WUCF-WN45
• Includes worksurface and tie plate.
• Wood veneer surface with:
• –3mm edgeband (K) on user edge and 1mm edgeband on
sides and back.
• Optional wireways along back edges are Charcoal. Refer to
Specification Guide for wireway details.
• Installed worksurfaces without wireway will not allow
clearance for power plug.
• Depths and widths shown in nominal dimensions.
30"
24"
1 2 3
34
34
34
43
43
43
45
45
45
54
54
54
(K)
Wood
Edgeband
Group I
(K)
Wood
Edgeband
Group II
$530
655
780
$530
655
780
$561
686
811
$561
686
811
$548
677
806
$548
677
806
$579
708
837
$579
708
837
To Order, Specify:
Wood Edgeband
1) Product number.
2) Wood finish color.
1 Core Options:
S
Standard
G Green, add $94 list.
(Right-hand orientation)
WUCF-WN54
Specification Tips
• Rear corner bracket is required and must be separately
specified.
• Worksurface support specific to product line; must be
separately specified.
• –Rear corner bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support panel
• –Side brackets
• Recommend the AKPM-23 or AKPS-5 keyboard pad for
36′′(914mm)-wide corners.
• Due to manufacturing restrictions, not available with
wood Cascade edge.
228
April 2008 / USA
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2 Wireway Options:
A Notched
B Curved
C Without
3 Orientation (as seated):
R Right-hand
L
Left-hand
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Corner, 90В° Split Top
Left/Right
Depth
Width
Wood
Number
24′′(610mm)
30′′(762mm)
48′′(1219mm)
48′′(1219mm)
WUCK-4848-W
WUCK-4848-W
1 2 3
N44
N55
(K)
Wood
Edgeband
Group I
(K)
Wood
Edgeband
Group II
(M)
Wood
Cascade
Group I
(M)
Wood
Cascade
Group II
$2587
$2637
$2718
$2768
$3231
$3281
$3362
$3412
Features
WUCK-W
To Order, Specify:
• Includes rear worksurface, front worksurface, mechanism,
and tie plate.
• Dual worksurfaces with a 1′′(25mm) space between the front
and rear worksurfaces. Front worksurface is 12′′(305mm)
deep.
• Wood veneer worksurface with:
• –3mm edgeband (K) or Cascade (M) edge on front and rear
worksurface front edge and 1mm on back and side edge of
front and rear worksurface.
• Adjustable front worksurface is attached to the rear
worksurface with a spring-assist mechanism.
• Front worksurface manually adjusts to any position
7′′(178mm) above and 5 3/4′′(146mm) below the rear
worksurface.
• Front worksurface tilts -15° to +9°.
• Spring assist mechanism available in charcoal finish color
only.
• Optional wireway will be Charcoal. Refer to Specification
Guide for wireway details.
• Installed worksurfaces without wireway will not allow
clearance for power plug.
• Depths and widths shown in nominal dimensions.
Wood Edgeband or Cascade Wood Edge
1) Product number.
2) Wood finish color.
1 Edge Options:
K Wood Edgeband
M Wood Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
Specification Tips
• Rear corner bracket is required and must be separately
specified.
• Worksurface support specific to product line; must be
separately specified.
• –Rear corner bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support panel
• –Side brackets
• Fixed-height rear worksurface is predrilled to accept standard
cantilever brackets. If using snap-n-fit cantilever on
24′′(610mm) deep worksurfaces, specify snap-n-fit mini
cantilever.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
229
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Corner, 90В° Wrap-Around
Extended
24"
24"
Features
• Includes worksurface and tie plate.
• Wood veneer worksurface with:
• –3mm edgeband (K) on user edge and 1mm
edgeband on sides and back, or
• –Cascade (M) on user edge and 1mm edgeband on
sides and back.
• Worksurfaces predrilled to accept most support
options.
• Optional wireway will be Charcoal. Refer to
Specification Guide for wireway details.
• Installed worksurfaces without wireway will not
allow clearance for power plug.
• Depths and widths shown in nominal dimensions.
Wood Edgeband or Cascade Wood Edge
1) Product number.
2) Wood finish color.
1 Edge Options:
K Wood Edgeband
M Wood Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
(Right-hand orientation)
Specification Tips
WUCE-WR44
• Rear corner bracket is required and must be
separately specified.
• Worksurface support specific to product line;
must be separately specified.
• –Rear corner bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support panel
• –Worksurface support column or leg
• –Side brackets
• –Attached lower storage
• Recommend the AKPM-23 or AKPS-5 keyboard pad
for 36′′(914mm)-wide corners.
24"
24"
(Left-hand orientation)
WUCE-WL44
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces
with 50′′(1270mm) spans that are heavily loaded and
not otherwise supported by mid-span cantilevers,
worksurface support panels, columns, legs
or attached lower storage.
230
To Order, Specify:
April 2008 / USA
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
3 Wireway Options:
A Notched
B Curved
C Without
4 Orientation (as seated):
R Right-hand
L
Left-hand
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Left/Right
Depth
Width
Corner, 90В° Wrap-Around
Extended
18′′(457mm) 36′′(914mm)
24′′(610mm) 36′′(914mm)
30′′(762mm) 36′′(914mm)
18′′(457mm) 42′′(1067mm)
24′′(610mm) 42′′(1067mm)
30′′(762mm) 42′′(1067mm)
18′′(457mm) 48′′(1219mm)
24′′(610mm) 48′′(1219mm)
30′′(762mm) 48′′(1219mm)
Length
Wood
Number
42′′(1067mm) WUCE-3642-W
48′′(1219mm) WUCE-3648-W
54′′(1372mm) WUCE-3654-W
60′′(1524mm) WUCE-3660-W
66′′(1676mm) WUCE-3666-W
72′′(1829mm) WUCE-3672-W
42′′(1067mm) WUCE-3642-W
48′′(1219mm) WUCE-3648-W
54′′(1372mm) WUCE-3654-W
60′′(1524mm) WUCE-3660-W
66′′(6764mm) WUCE-3666-W
72′′(1829mm) WUCE-3672-W
42′′(1067mm)(1) WUCE-3642-W
48′′(1219mm)(1) WUCE-3648-W
54′′(1372mm)(1) WUCE-3654-W
60′′(1524mm)(1) WUCE-3660-W
66′′(1676mm)(1) WUCE-3666-W
72′′(1829mm)(1) WUCE-3672-W
48′′(1219mm) WUCE-4248-W
54′′(1372mm) WUCE-4254-W
60′′(1524mm) WUCE-4260-W
66′′(1676mm) WUCE-4266-W
72′′(1829mm) WUCE-4272-W
48′′(1219mm) WUCE-4248-W
54′′(1372mm) WUCE-4254-W
60′′(1524mm) WUCE-4260-W
66′′(1676mm) WUCE-4266-W
72′′(1829mm) WUCE-4272-W
48′′(1067mm) WUCE-4248-W
54′′(1372mm) WUCE-4254-W
60′′(1524mm) WUCE-4260-W
66′′(1676mm) WUCE-4266-W
72′′(1829mm) WUCE-4272-W
54′′(1372mm) WUCE-4854-W
60′′(1524mm) WUCE-4860-W
66′′(1676mm) WUCE-4866-W
72′′(1829mm) WUCE-4872-W
54′′(1372mm) WUCE-4854-W
60′′(1524mm) WUCE-4860-W
66′′(1676mm) WUCE-4866-W
72′′(1829mm) WUCE-4872-W
54′′(1372mm) WUCE-4854-W
60′′(1524mm) WUCE-4860-W
66′′(1676mm) WUCE-4866-W
72′′(1829mm) WUCE-4872-W
1 2 3 4
33
33
33
33
33
33
44
44
44
44
44
44
55
55
55
55
55
55
33
33
33
33
33
44
44
44
44
44
55
55
55
55
55
33
33
33
33
44
44
44
44
55
55
55
55
(K)
Wood
Edgeband
Group I
(K)
Wood
Edgeband
Group II
(M)
Wood
Cascade
Group I
(M)
Wood
Cascade
Group II
$1006
1016
1025
1034
1145
1255
$1028
1038
1047
1056
1167
1277
$1160
1170
1179
1188
1299
1409
$1031
1041
1052
1165
1280
$1053
1063
1074
1187
1302
$1185
1195
1206
1319
1434
$1061
1068
1184
1301
$1083
1090
1206
1323
$1215
1222
1338
1455
$1059
1070
1079
1089
1203
1320
$1081
1092
1101
1111
1225
1342
$1213
1224
1233
1243
1357
1474
$1085
1095
1107
1223
1345
$1107
1117
1129
1245
1367
$1239
1249
1261
1377
1499
$1115
1153
1242
1366
$1137
1175
1264
1388
$1269
1307
1396
1520
$1296
1308
1320
1331
1469
1607
$1318
1330
1342
1353
1491
1629
N/A
N/A
N/A
N/A
N/A
N/A
$1321
1333
1347
1462
1604
$1343
1355
1369
1484
1626
$1475
1487
1501
1616
1758
$1356
1365
1508
1653
$1378
1387
1530
1675
$1510
1519
1662
1807
$1349
1362
1374
1386
1527
1672
$1371
1384
1396
1408
1549
1694
N/A
N/A
N/A
N/A
N/A
N/A
$1375
1387
1402
1520
1669
$1397
1409
1424
1542
1691
$1529
1541
1556
1674
1823
$1410
1450
1566
1718
$1432
1472
1588
1740
$1564
1604
1720
1872
(1)
Cascade edge option not available in these sizes.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
231
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Corner, 90В° Notched
Extended
24"
24"
Features
• Includes worksurface and tie plate.
• Wood veneer worksurface with:
• –3mm edgeband (K) on user edge and 1mm
edgeband on sides and back, or
• –Cascade (M) on user edge and 1mm edgeband on
sides and back.
• Worksurfaces predrilled to accept an adjustable
keyboard and most support options.
• Optional wireways along back edges are Charcoal.
Refer to Specification Guide for wireway details.
• Installed worksurfaces without wireway will not
allow clearance for power plug.
• Depths and widths shown in nominal dimensions.
Wood Edgeband or Cascade Wood Edge
1) Product number.
2) Wood finish color.
1 Edge Options:
K Wood Edgeband
M Wood Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
(Right-hand orientation)
Specification Tips
WUCP-WR44
• Rear corner bracket is required and must be
separately specified.
• Worksurface support specific to product line;
must be separately specified.
• –Rear corner bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support panel
• –Side brackets
• Recommend the AKPM-23 or AKPS-5 keyboard pad
for 36′′(914mm)-wide corners.
24"
24"
(Left-hand orientation)
WUCP-WL44
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces
with 50′′(1270mm) spans that are heavily loaded and
not otherwise supported by mid-span cantilevers,
worksurface end panels, posts or attached lower
storage.
232
To Order, Specify:
April 2008 / USA
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
3 Wireway Options:
A Notched
B Curved
C Without
4 Orientation (as seated):
R Right-hand
L
Left-hand
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Left/Right
Depth
Width
Corner, 90В° Notched
Extended
18′′(457mm) 36′′(914mm)
24′′(610mm) 36′′(914mm)
30′′(762mm) 36′′(914mm)
18′′(457mm) 42′′(1067mm)
24′′(610mm) 42′′(1067mm)
30′′(762mm) 42′′(1067mm)
18′′(457mm) 48′′(1219mm)
24′′(610mm) 48′′(1219mm)
30′′(762mm) 48′′(1219mm)
Length
Wood
Number
42′′(1067mm) WUCP-3642-W
48′′(1219mm) WUCP-3648-W
54′′(1372mm) WUCP-3654-W
60′′(1524mm) WUCP-3660-W
66′′(1676mm) WUCP-3666-W
72′′(1829mm) WUCP-3672-W
42′′(1067mm) WUCP-3642-W
48′′(1219mm) WUCP-3648-W
54′′(1372mm) WUCP-3654-W
60′′(1524mm) WUCP-3660-W
66′′(1676mm) WUCP-3666-W
72′′(1829mm) WUCP-3672-W
42′′(1067mm)(1) WUCP-3642-W
48′′(1219mm)(1) WUCP-3648-W
54′′(1372mm)(1) WUCP-3654-W
60′′(1524mm)(1) WUCP-3660-W
66′′(1676mm)(1) WUCP-3666-W
72′′(1829mm)(1) WUCP-3672-W
48′′(1219mm) WUCP-4248-W
54′′(1372mm) WUCP-4254-W
60′′(1524mm) WUCP-4260-W
66′′(1676mm) WUCP-4266-W
72′′(1829mm) WUCP-4272-W
48′′(1219mm) WUCP-4248-W
54′′(1372mm) WUCP-4254-W
60′′(1524mm) WUCP-4260-W
66′′(1676mm) WUCP-4266-W
72′′(1829mm) WUCP-4272-W
48′′(1219mm) WUCP-4248-W
54′′(1372mm) WUCP-4254-W
60′′(1524mm) WUCP-4260-W
66′′(1676mm) WUCP-4266-W
72′′(1829mm) WUCP-4272-W
54′′(1372mm) WUCP-4854-W
60′′(1524mm) WUCP-4860-W
66′′(1676mm) WUCP-4866-W
72′′(1829mm) WUCP-4872-W
54′′(1372mm) WUCP-4854-W
60′′(1524mm) WUCP-4860-W
66′′(1676mm) WUCP-4866-W
72′′(1829mm) WUCP-4872-W
54′′(1372mm) WUCP-4854-W
60′′(1524mm) WUCP-4860-W
66′′(1676mm) WUCP-4866-W
72′′(1829mm) WUCP-4872-W
1 2 3 4
33
33
33
33
33
33
44
44
44
44
44
44
55
55
55
55
55
55
33
33
33
33
33
44
44
44
44
44
55
55
55
55
55
33
33
33
33
44
44
44
44
55
55
55
55
(K)
Wood
Edgeband
Group I
(K)
Wood
Edgeband
Group II
(M)
Wood
Cascade
Group I
(M)
Wood
Cascade
Group II
$1022
1031
1040
1050
1161
1274
$1044
1053
1062
1072
1183
1296
$1064
1073
1082
1092
1203
1316
$1047
1058
1067
1181
1298
$1069
1080
1089
1203
1320
$1089
1100
1109
1223
1340
$1076
1083
1202
1321
$1098
1105
1224
1343
$1118
1125
1244
1363
$1056
1065
1075
1085
1199
1316
$1078
1087
1097
1107
1221
1338
$1098
1107
1117
1127
1241
1358
$1082
1093
1102
1220
1341
$1104
1115
1124
1242
1363
$1124
1135
1144
1262
1383
$1112
1119
1242
1365
$1134
1141
1264
1387
$1154
1161
1284
1407
$1278
1289
1300
1312
1452
1592
$1300
1311
1322
1334
1474
1614
N/A
N/A
N/A
N/A
N/A
N/A
$1309
1322
1334
1477
1622
$1331
1344
1356
1499
1644
$1331
1364
1376
1519
1664
$1345
1354
1503
1651
$1367
1376
1525
1673
$1387
1396
1545
1693
$1312
1323
1335
1347
1490
1634
$1334
1345
1357
1369
1512
1656
N/A
N/A
N/A
N/A
N/A
N/A
$1344
1357
1369
1516
1665
$1366
1379
1391
1538
1687
$1366
1399
1411
1558
1707
$1381
1390
1543
1695
$1403
1412
1565
1717
$1423
1432
1585
1737
(1)
Cascade edge option not available in these sizes.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
233
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Corner, 90В° Wrap-Around
Transitional Extended
Length
Width
24"
18"
Features
• Includes worksurface and tie plate.
• Wood veneer worksurface with:
• –3mm edgeband (K) on user edge and 1mm
edgeband on sides and back, or
• –Cascade (M) on user edge and 1mm edgeband on
sides and back.
• Worksurfaces predrilled to accept most support
options.
• Optional wireway will be Charcoal. Refer to
Specification Guide for wireway details.
• Installed worksurfaces without wireway will not
allow clearance for power plug.
• Depths and widths shown in nominal dimensions.
Wood Edgeband or Cascade Wood Edge
1) Product number.
2) Wood finish color.
1 Edge Options:
K Wood Edgeband
M Wood Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
(Right-hand orientation)
WUCX-WR34
Specification Tips
Length
Width
24"
18"
(Left-hand orientation)
WUCX-WL43
• Rear corner bracket is required and must be
separately specified.
• Worksurface support specific to product line;
must be separately specified.
• –Rear corner bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support panel
• –Worksurface support column or leg
• –Side brackets
• –Attached lower storage
• Recommend the AKPM-23 or AKPS-5 keyboard pad
for 36′′(914mm)-wide corners.
• Intermediate support is required for unsupported
worksurface span greater than 60′′(1524mm).
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces
with 50′′(1270mm) spans that are heavily loaded and
not otherwise supported by mid-span cantilevers,
worksurface support panels, columns, legs or attached
lower storage.
234
To Order, Specify:
April 2008 / USA
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
3 Wireway Options:
A Notched
B Curved
C Without
4 Orientation (as seated):
R Right-hand
L
Left-hand
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Left/Right
Depth
Width
Corner, 90В° Wrap-Around
Transitional Extended
18′′(457mm)
/24′′(66mm)
36′′(914mm)
Length
Wood
Number
(K)
Wood
Edgeband
Group I
1 2 3 4
(K)
Wood
Edgeband
Group II
(M)
Wood
Cascade
Group I
(M)
Wood
Cascade
Group II
42′′(1067mm) WUCX-3642-W
34 $ 962
$1011
$1253
$1302
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
42′′(1067mm)
WUCX-3648-W
WUCX-3654-W
WUCX-3660-W
WUCX-3666-W
WUCX-3672-W
WUCX-3642-W
34
991
34 1083
34 1178
34 1292
34 1403
43 $ 962
1041
1138
1237
1357
1473
$1011
1282
1374
1469
1583
1694
$1253
1332
1429
1528
1648
1764
$1302
48′′(1219mm) WUCX-3648-W
54′′(1372mm) WUCX-3654-W
60′′(1524mm) WUCX-3660-W
66′′(6764mm) WUCX-3666-W
72′′(1829mm) WUCX-3672-W
42′′(1067mm)(1) WUCX-3642-W
43
991
43 1083
43 1178
43 1292
43 1403
45 $ 972
1041
1138
1237
1357
1473
$1021
1282
1374
1469
1583
1694
N/A
1332
1429
1528
1648
1764
N/A
48′′(1219mm)(1) WUCX-3648-W
54′′(1372mm)(1) WUCX-3654-W
60′′(1524mm)(1) WUCX-3660-W
66′′(6764mm)(1) WUCX-3666-W
72′′(1829mm)(1) WUCX-3672-W
42′′(1067mm)(1) WUCX-3642-W
45 1001
45 1093
45 1188
45 1302
45 1413
54 $ 972
1051
1148
1247
1367
1483
$1021
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
48′′(1219mm)(1) WUCX-3648-W
54′′(1372mm)(1) WUCX-3654-W
60′′(1524mm)(1) WUCX-3660-W
66′′(1676mm)(1) WUCX-3666-W
72′′(1829mm)(1) WUCX-3672-W
18′′(457mm)/ 42′′(1067mm) 48′′(1219mm) WUCX-4248-W
24′′(610mm)
54′′(1372mm) WUCX-4254-W
60′′(1524mm) WUCX-4260-W
66′′(1676mm) WUCX-4266-W
72′′(1829mm) WUCX-4272-W
24′′(610mm)/ 42′′(1067mm) 48′′(1219mm) WUCX-4248-W
18′′(457mm)
54′′(1372mm) WUCX-4254-W
60′′(1524mm) WUCX-4260-W
66′′(1676mm) WUCX-4266-W
72′′(1829mm) WUCX-4272-W
24′′(610mm)/ 42′′(1067mm) 48′′(1219mm) WUCX-4248-W
30′′(762mm)
54′′(1372mm) WUCX-4254-W
60′′(1524mm) WUCX-4260-W
66′′(1676mm) WUCX-4266-W
72′′(1829mm) WUCX-4272-W
30′′(762mm)/ 42′′(1067mm) 48′′(1067mm) WUCX-4248-W
24′′(610mm)
54′′(1372mm) WUCX-4254-W
60′′(1524mm) WUCX-4260-W
66′′(1676mm) WUCX-4266-W
72′′(1829mm) WUCX-4272-W
18′′(457mm)/ 48′′(1219mm) 54′′(1372mm) WUCX-4854-W
24′′(610mm)
60′′(1524mm) WUCX-4860-W
66′′(1676mm) WUCX-4866-W
72′′(1829mm) WUCX-4872-W
24′′(610mm)/ 48′′(1219mm) 54′′(1372mm) WUCX-4854-W
18′′(457mm)
60′′(1524mm) WUCX-4860-W
66′′(1676mm) WUCX-4866-W
72′′(1829mm) WUCX-4872-W
24′′(610mm)/ 48′′(1219mm) 54′′(1372mm) WUCX-4854-W
30′′(762mm)
60′′(1524mm) WUCX-4860-W
66′′(1676mm) WUCX-4866-W
72′′(1829mm) WUCX-4872-W
30′′(762mm)/ 48′′(1219mm) 54′′(1372mm) WUCX-4854-W
24′′(610mm)
60′′(1524mm) WUCX-4860-W
66′′(1676mm) WUCX-4866-W
72′′(1829mm) WUCX-4872-W
54 1001
54 1093
54 1188
54 1302
54 1413
34 $1051
1051
1148
1247
1367
1483
$1101
N/A
N/A
N/A
N/A
N/A
$1342
N/A
N/A
N/A
N/A
N/A
$1392
34 1103
34 1198
34 1315
34 1402
43 $1051
1158
1258
1380
1514
$1101
1394
1489
1606
1742
$1342
1449
1549
1671
1854
$1392
43 1103
43 1198
43 1315
43 1402
45 $1070
1158
1258
1380
1514
$1120
1394
1489
1606
1742
$1361
1449
1549
1671
1854
$1411
45 1122
45 1217
45 1334
45 1421
54 $1070
1177
1277
1399
1533
$1120
1413
1508
1625
1761
$1361
1468
1568
1690
1873
$1411
54 1122
54 1217
54 1334
54 1421
34 $1125
1177
1277
1399
1533
$1186
1413
1508
1625
1761
$1416
1468
1568
1690
1873
$1477
34 1220
34 1336
34 1453
43 $1125
1281
1403
1525
$1186
1511
1627
1744
$1416
1572
1694
1816
$1477
43 1220
43 1336
43 1453
45 $1144
1281
1403
1525
$1205
1511
1627
1744
$1435
1572
1694
1816
$1496
45 1239
45 1355
45 1472
54 $1144
1300
1422
1544
$1205
1530
1646
1763
$1435
1591
1713
1835
$1496
1300
1422
1544
1530
1646
1763
1591
1713
1835
24′′(610mm)/ 36′′(914mm)
18′′(457mm)
24′′(610mm)/ 36′′(914mm)
30′′(762mm)
30′′(762mm)/ 36′′(914mm)
24′′(610mm)
54
54
54
1239
1355
1472
(1)
Cascade edge option not available in these sizes.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
235
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Left/Right
Depth
90В° Merger
18′′(457mm)
24′′(610mm)
30′′(762mm)
24"
Width
Wood
Number
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
WUCQ-3636-WK
WUCQ-4242-WK
WUCQ-4848-WK
WUCQ-3636-WK
WUCQ-4242-WK
WUCQ-4848-WK
WUCQ-3636-WK
WUCQ-4242-WK
WUCQ-4848-WK
1 2
Features
24"
WUCQ-WN44
• 90° Merger is suggested alternative to using two
perpendicular rectangular worksurfaces.
• Rear corner bracket is required and must be separately
specified.
• Worksurface support specific to product line; must be
separately specified.
• –Rear corner bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support panel
• –Side brackets
• Not designed for use with adjustable keyboard pads.
• Due to manufacturing restrictions, not available with
wood Cascade edge.
April 2008 / USA
(K)
Wood
Edgeband
Group II
$606
677
810
$620
691
824
$692
763
896
$627
700
837
$641
714
851
$713
786
923
To Order, Specify:
• Includes worksurface and tie plate.
• Wood veneer surface with:
• –3mm edgeband (K) on user edge and 1mm edgeband on
sides and back.
• Worksurfaces predrilled to accept most support options.
• Optional wireways along back edges are Charcoal. Refer to
Specification Guide for wireway details.
• Installed worksurfaces without wireway will not allow
clearance for power plug.
• Depths and widths shown in nominal dimensions.
Specification Tips
236
N33
N33
N33
N44
N44
N44
N55
N55
N55
(K)
Wood
Edgeband
Group I
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
Wood Edgeband
1) Product number.
2) Wood finish color.
3) Edge trim color.
1 Core Options:
S
Standard
G Green, add $94 list.
2 Wireway Options:
A Notched
B Curved
C Without
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Left/Right
Depth
Corner, 120В° Wrap-Around
18′′(457mm)
24′′(610mm)
24"
24"
30′′(762mm)
WUCZ-WN44
Width
Wood
Number
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
WUCZ-3636-WK
WUCZ-4242-WK
WUCZ-4848-WK
WUCZ-5454-WK
WUCZ-6060-WK
WUCZ-3636-WK
WUCZ-4242-WK
WUCZ-4848-WK
WUCZ-5454-WK
WUCZ-6060-WK
WUCZ-3636-WK
WUCZ-4242-WK
WUCZ-4848-WK
WUCZ-5454-WK
WUCZ-6060-WK
1 2
Features
N33
N33
N33
N33
N33
N44
N44
N44
N44
N44
N55
N55
N55
N55
N55
(K)
Wood
Edgeband
Group I
(K)
Wood
Edgeband
Group II
$ 855
938
1104
1181
1297
$ 875
968
1138
1219
1337
$ 973
1068
1254
1345
1477
$ 897
984
1158
1238
1360
$ 917
1014
1192
1276
1400
$1015
1114
1308
1402
1540
To Order, Specify:
• Includes worksurface and tie plate.
• Wood veneer worksurface with:
• –3mm edgeband (K) on user edge and 1mm edgeband on
sides and back.
• Worksurfaces predrilled to accept most support options.
• Optional wireway will be Charcoal. Refer to Specification
Guide for wireway details.
• Installed worksurfaces without wireway will not allow
clearance for power plug.
• Depths and widths shown in nominal dimensions.
Specification Tips
• Rear corner bracket is required and must be separately
specified.
• Worksurface support specific to product line; must be
separately specified.
• –Rear corner bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support panel
• –Side brackets
• Recommend the AKPM-23 or AKPS-5 keyboard pad for
36′′(914mm)-wide corners.
• Due to manufacturing restrictions, not available with
wood Cascade edge.
Wood Edgeband
1) Product number.
2) Wood finish color.
1 Core Options:
S
Standard
G Green, add $94 list.
2 Wireway Options:
A Notched
B Curved
C Without
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces with
50′′(1270mm) spans that are heavily loaded and not otherwise
supported by mid-span cantilevers, worksurface support
panels, columns, legs or attached lower storage.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
237
UniGroup Too Price List
Adaptable Worksurfaces — Wood
D-Shaped Convergent
Width
Length
Wood
Number
24′′(610mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
WURD-2436-W
WURD-2442-W
WURD-2448-W
WURD-2454-W
WURD-2460-W
WURD-2466-W
WURD-2472-W
WURD-3036-W
WURD-3042-W
WURD-3048-W
WURD-3054-W
WURD-3060-W
WURD-3066-W
WURD-3072-W
WURD-3636-W
WURD-3642-W
WURD-3648-W
WURD-3654-W
WURD-3660-W
WURD-3666-W
WURD-3672-W
30′′(762mm)
36′′(914mm)
1 2 3
(K)
Wood
Edgeband
Group I
(K)
Wood
Edgeband
Group II
(M)
Wood
Cascade
Group I
(M)
Wood
Cascade
Group II
$ 597
675
768
875
979
1098
1213
$ 618
697
794
903
1009
1130
1250
$ 637
719
818
930
1041
1163
1289
$ 627
709
807
919
1028
1153
1273
$ 649
732
834
948
1059
1186
1312
$ 669
755
859
977
1093
1221
1353
$ 747
843
960
1094
1224
1372
1516
$ 772
871
993
1128
1261
1413
1562
$ 796
899
1022
1163
1301
1454
1611
$ 777
877
999
1138
1273
1427
1576
$ 803
906
1033
1173
1311
1469
1624
$ 828
935
1063
1210
1353
1512
1675
Features
To Order, Specify:
• Includes worksurface and tie plate.
• Wood veneer worksurface with:
• –3mm edgeband (K) on user edge and 1mm edgeband on
back (width), or
• –Cascade (M) on user edge and 1mm edgeband on back
(width).
• Worksurfaces predrilled to accept most support options.
• Optional wireway will be Charcoal. Refer to Specification
Guide for wireway details.
• Installed worksurfaces without wireway will not allow
clearance for power plug.
• Must be attached to a panel or face of a straight worksurface.
• Depths and widths shown in nominal dimensions.
WURD-W
Wood Edgeband or Cascade Wood Edge
1) Product number.
2) Wood finish color.
1 Edge Options:
K Wood Edgeband
M Wood Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
Specification Tips
• Worksurface support specific to product line; must be
separately specified.
• –Column support or leg
• –Straight leg basic
• –Attached lower storage
• In addition to the required floor support, separately specify
the appropriate support options. Select one or more of the
following:
• –Cantilever bracket
• –Worksurface support panel
• –Convergent mount bracket
• –Flush mount plates
• –Side bracket
• For aesthetic reasons, when using Cascade edge option,
consider specifying D-Shaped Convergent Wrap-Around.
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces with
50′′(1270mm) spans that are heavily loaded and not otherwise
supported by mid-span cantilevers, worksurface support
panels, columns, legs or attached lower storage.
238
April 2008 / USA
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
3 Wireway Options:
A Notched
B Curved
C Without
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Rectangular Convergent
Width
Length
Wood
Number
24′′(610mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
WURV-2436-W
WURV-2442-W
WURV-2448-W
WURV-2454-W
WURV-2460-W
WURV-2466-W
WURV-2472-W
WURV-3036-W
WURV-3042-W
WURV-3048-W
WURV-3054-W
WURV-3060-W
WURV-3066-W
WURV-3072-W
WURV-3636-W
WURV-3642-W
WURV-3648-W
WURV-3654-W
WURV-3660-W
WURV-3666-W
WURV-3672-W
30′′(762mm)
36′′(914mm)
1 2 3
(K)
Wood
Edgeband
Group I
(K)
Wood
Edgeband
Group II
(M)
Wood
Cascade
Group I
(M)
Wood
Cascade
Group II
$ 597
613
631
696
761
851
934
$ 618
644
682
766
837
933
1028
$ 637
735
814
914
997
1109
1223
$ 627
639
663
731
799
894
981
$ 649
675
716
804
879
980
1079
$ 669
772
855
960
1047
1164
1286
$ 747
788
823
915
1006
1125
1237
$ 772
824
881
991
1089
1216
1340
$ 796
915
1018
1147
1257
1400
1571
$ 777
814
855
950
1044
1168
1284
$ 803
855
915
1029
1131
1263
1391
$ 828
952
1059
1193
1307
1455
1634
Features
WURV-W
To Order, Specify:
• Wood veneer worksurface:
• –3mm edgeband (K) on user edges and 1mm edgeband on
front and back (width), or
• –Cascade (M) on user edges and 1mm edgeband on front
and back (width).
• Must be attached to a panel or face of a straight
worksurface.
• Worksurfaces predrilled to accept most support options.
• Optional wireway will be Charcoal. Refer to Specification
Guide for wireway details.
• Installed worksurfaces without wireway will not allow
clearance for power plug.
• Depths and widths shown in nominal dimensions.
Wood Edgeband or Cascade Wood Edge
1) Product number.
2) Wood finish color.
1 Edge Options:
K Wood Edgeband
M Wood Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
Specification Tips
• Worksurface support specific to product line; must be
separately specified.
• –Column support or leg
• –Straight leg basic
• –Attached lower storage
• In addition to the required floor support, separately specify
the appropriate support options. Select one or more of the
following:
• –Cantilever bracket
• –Worksurface support panel
• –Convergent mount bracket
• –Flush mount plates
• For aesthetic reasons, when using Cascade edge or
edgeband edge option, consider specifying D-Shaped
Convergent Wrap-Around.
3 Wireway Options:
A Notched
B Curved
C Without
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces with
50′′(1270mm) spans that are heavily loaded and not otherwise
supported by mid-span cantilevers, worksurface support
panels, columns, legs or attached lower storage.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
239
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Depth
D-Shaped Convergent,
Wrap-Around
Width
18′′(457mm) 36′′(914mm)
24′′(610mm) 36′′(914mm)
30′′(762mm) 36′′(914mm)
18′′(457mm) 42′′(1067mm)
24′′(610mm) 42′′(1067mm)
30′′(762mm) 42′′(1067mm)
(Right-hand orientation)
18′′(457mm) 48′′(1219mm)
24′′(610mm) 48′′(1219mm)
(Left-hand orientation)
30′′(762mm) 48′′(1219mm)
WUCD-W
Length
Wood
Number
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
WUCD-3660-W
WUCD-3666-W
WUCD-3672-W
WUCD-3660-W
WUCD-3666-W
WUCD-3672-W
WUCD-3660-W
WUCD-3666-W
WUCD-3672-W
WUCD-4260-W
WUCD-4266-W
WUCD-4272-W
WUCD-4260-W
WUCD-4266-W
WUCD-4272-W
WUCD-4260-W
WUCD-4266-W
WUCD-4272-W
WUCD-4860-W
WUCD-4866-W
WUCD-4872-W
WUCD-4860-W
WUCD-4866-W
WUCD-4872-W
WUCD-4860-W
WUCD-4866-W
WUCD-4872-W
1 2 3 4
3
3
3
4
4
4
5
5
5
3
3
3
4
4
4
5
5
5
3
3
3
4
4
4
5
5
5
Features
Specification Tips
• Worksurface support specific to product line; must be
separately specified.
• –Worksurface column support or leg
• –Attached lower storage
• In addition to the required floor support, separately specify
the appropriate support options. Select one or more of the
following:
• –Cantilever bracket
• –Worksurface support panel
• –Convergent mount bracket
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces with
50′′(1270mm) spans that are heavily loaded and not otherwise
supported by mid-span cantilevers, worksurface support
panels, columns, legs or attached lower storage.
April 2008 / USA
(K)
Wood
Edgeband
Group II
(M)
Wood
Cascade
Group I
(M)
Wood
Cascade
Group II
$1145
1213
1276
$1174
1242
1305
$1202
1270
1333
$1174
1243
1309
$1203
1272
1338
$1231
1300
1366
$1207
1274
1342
$1236
1303
1371
$1264
1331
1399
$1205
1276
1342
$1234
1305
1371
$1262
1333
1399
$1235
1308
1377
$1264
1337
1406
$1292
1365
1434
$1270
1340
1412
$1299
1369
1441
$1327
1397
1469
$1445
1530
1610
$1474
1559
1639
$1502
1587
1667
$1482
1568
1651
$1511
1597
1680
$1539
1625
1708
$1523
1607
1692
$1552
1636
1721
$1580
1664
1749
$1505
1593
1676
$1534
1622
1705
$1562
1650
1733
$1543
1633
1719
$1572
1662
1748
$1600
1690
1776
$1586
1673
1762
$1615
1702
1791
$1643
1730
1819
To Order, Specify:
• Includes worksurface and tie plate.
• Wood veneer worksurface:
• –3mm edgeband (K) on user edge and 1mm edgeband on
side and back (width), or
• –Cascade (M) on user edge and 1mm edgeband on side and
back (width).
• Worksurfaces predrilled to accept most support options.
• Optional wireway will be Charcoal. Refer to Specification
Guide for wireway details.
• Installed worksurfaces without wireway will not allow
clearance for power plug.
• 36′′(914mm)-wide surfaces have a 24′′(610mm) D-shaped
diameter.
• 42′′(1067mm)- to 60′′(1524mm)-wide surfaces have a
30′′(762mm) D-shaped diameter.
• Depths and widths shown in nominal dimensions.
240
(K)
Wood
Edgeband
Group I
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
Wood Edgeband or Cascade Wood Edge
1) Product number.
2) Wood finish color.
1 Edge Options:
K Wood Edgeband
M Wood Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
4 Orientation (as seated):
R Right-hand
L
Left-hand
UniGroup Too Price List
Adaptable Worksurfaces — Wood
D-Shaped Ender
Depth
Length
Wood
Number
18′′(457mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
WUDD-1836-W
WUDD-1842-W
WUDD-1848-W
WUDD-1854-W
WUDD-1860-W
WUDD-1866-W
WUDD-1872-W
WUDD-2436-W
WUDD-2442-W
WUDD-2448-W
WUDD-2454-W
WUDD-2460-W
WUDD-2466-W
WUDD-2472-W
WUDD-3036-W
WUDD-3042-W
WUDD-3048-W
WUDD-3054-W
WUDD-3060-W
WUDD-3066-W
WUDD-3072-W
24′′(610mm)
WUDD-W
30′′(762mm)
1 2
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
(K)
Wood
Edgeband
Group I
(K)
Wood
Edgeband
Group II
(M)
Wood
Cascade
Group I
(M)
Wood
Cascade
Group II
$ 581
656
746
850
950
1065
1178
$ 597
675
768
875
979
1098
1213
$ 618
697
794
903
1009
1130
1250
$ 611
689
784
893
998
1118
1237
$ 627
709
807
919
1028
1153
1273
$ 649
732
834
948
1059
1186
1312
$ 727
820
933
1062
1188
1331
1473
$ 747
843
960
1094
1224
1372
1516
$ 772
871
993
1128
1261
1413
1562
$ 757
853
971
1105
1236
1384
1532
$ 777
877
999
1138
1273
1427
1576
$ 803
906
1033
1173
1311
1469
1624
Features
To Order, Specify:
• Includes worksurface and tie plate.
• Wood veneer worksurface with:
• –3mm edgeband (K) on user edge and 1mm edgeband on
back (width), or
• –Cascade (M) on user edge and 1mm edgeband on back
(width).
• Worksurfaces predrilled to accept most support options.
• Must be attached to the depth of adjoining worksurface.
• Depths and widths shown in nominal dimensions.
Specification Tips
• Worksurface support specific to product line; must be
separately specified.
• –Worksurface column support or leg
• –Attached lower storage
• In addition to the required floor support, separately specify
the appropriate support options. Select one or more of the
following:
• –Standard link cantilever bracket
• –Worksurface support panel
• –Convergent mount bracket
• –Flush mount plate
• For aesthetic reasons, when using Cascade edge option,
consider specifying D-Shaped Convergent Wrap-Around.
Wood Edgeband or Cascade Wood Edge
1) Product number.
2) Wood finish color.
1 Edge Options:
K Wood Edgeband
M Wood Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces with
50′′(1270mm) spans that are heavily loaded and not otherwise
supported by mid-span cantilevers, worksurface support
panels, columns, legs or attached lower storage.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
241
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Transitional
Left/Right
Depth
Width
Bent
Length
Width
24"
30"
(Right-hand orientation)
WUCB-WR45
Length
Width
24"
30"
(Left-hand orientation)
WUCB-WL54
Length
24′′(610mm)/ 24′′(610mm) 36′′(914mm)
30′′(762mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
24′′(610mm)/ 30′′(762mm) 36′′(914mm)
30′′(762mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
30′′(762mm)/ 24′′(610mm) 36′′(914mm)
24′′(610mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
30′′(762mm)/ 30′′(762mm) 36′′(914mm)
24′′(610mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
Wood
Number
1 2 3
(M)
Wood
Cascade
Group I
(M)
Wood
Cascade
Group II
R45 $ 856
$ 885
$1070
$1099
WUCB-2442-W
WUCB-2448-W
WUCB-2460-W
WUCB-3036-W
R45
939
R45 1106
R45 1301
R45 $1010
970
1143
1344
$1044
1174
1383
1627
$1263
1205
1420
1670
$1297
WUCB-3042-W
WUCB-3048-W
WUCB-3060-W
WUCB-2436-W
R45 1108
R45 1304
R45 1397
L54 $ 856
1145
1347
1443
$ 885
1385
1630
1746
$1070
1422
1673
1792
$1099
WUCB-2442-W
WUCB-2448-W
WUCB-2460-W
WUCB-3036-W
L54
L54
L54
L54
939
1106
1301
$1010
970
1143
1344
$1044
1174
1383
1627
$1263
1205
1420
1670
$1297
WUCB-3042-W
WUCB-3048-W
WUCB-3060-W
L54
L54
L54
1108
1304
1397
1145
1347
1443
1385
1630
1746
1422
1673
1792
Features
To Order, Specify:
• Includes worksurface and tie plate.
• Wood veneer worksurface with:
• –3mm edgeband (K) on user edge and 1mm edgeband on
back (width), or
• –Cascade (M) on user edge and 1mm edgeband on back
(width).
• Worksurfaces predrilled to accept most support options.
• Optional wireway along back edge is Charcoal. Refer to
Specification Guide for wireway details.
• Installed worksurfaces without wireway will not allow
clearance for power plug.
• Depths and widths shown in nominal dimensions.
• Worksurface support specific to product line; must be
separately specified.
• –Convergent mount bracket - REQUIRED
• –Cantilever bracket
• –Worksurface support column or leg
• –Flush mount plate
Note: Separately specified worksurface reinforcement
channels provide additional support for worksurfaces with
50′′(1270mm) spans that are heavily loaded and not otherwise
supported by mid-span cantilevers, worksurface end panels,
posts or attached lower storage.
April 2008 / USA
(K)
Wood
Edgeband
Group II
WUCB-2436-W
Specification Tips
242
(K)
Wood
Edgeband
Group I
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
Wood Edgeband or Cascade Wood Edge
1) Product number.
2) Wood finish color.
1 Edge Options:
K Wood Edgeband
M Wood Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Countertop
Depth
Width
Wood
Number
12′′(305mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
78′′(1981mm)
84′′(2134mm)
90′′(2286mm)
96′′(2438mm)
102′′(2591mm)
108′′(2743mm)
114′′(2896mm)
120′′(3048mm)
WUTS-1224-W
WUTS-1230-W
WUTS-1236-W
WUTS-1242-W
WUTS-1248-W
WUTS-1254-W
WUTS-1260-W
WUTS-1266-W
WUTS-1272-W
WUTS-1278-W
WUTS-1284-W
WUTS-1290-W
WUTS-1296-W
WUTS-12A2-W
WUTS-12A8-W
WUTS-12B4-W
WUTS-12C0-W
WUTS-W
1 2
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
(K)
Wood
Edgeband
Group I
(K)
Wood
Edgeband
Group II
(M)
Wood
Cascade
Group I
(M)
Wood
Cascade
Group II
$430
461
494
522
574
577
579
602
620
651
681
709
739
761
783
802
820
$444
476
510
539
602
605
608
621
640
671
701
730
761
784
807
827
846
$ 538
576
617
653
726
729
731
753
775
814
852
888
925
953
981
1004
1034
$ 552
591
633
670
754
757
760
772
795
834
872
909
947
976
1005
1029
1060
Features
To Order, Specify:
• Includes countertop and tie plate.
• Wood veneer surface with:
• –3mm edgeband (K) on user edges and 1mm edgeband on
ends, or
• –Cascade (M) user edges and 1mm edgeband on ends.
• Widths shown in nominal dimensions.
Specification Tips
• Requires separately specified mounting hardware.
• For installation on panels 42′′(1067mm)-high or higher.
• For use in applications that match panel width or multiple
panel widths.
Wood Edgeband or Cascade Wood Edge
1) Product number.
2) Wood finish color.
1 Edge Options:
K Wood Edgeband
M Wood Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
243
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Conference End
Depth
Width
38′′(965mm)
50′′(1270mm)
62′′(1575mm)
30′′(762mm)
Wood
Number
1 2 3
WUDC-3830-W
WUDC-5030-W
WUDC-6230-W
(K)
Wood
Edgeband
Group I
(K)
Wood
Edgeband
Group II
(M)
Wood
Cascade
Group I
(M)
Wood
Cascade
Group II
$1342
1424
1498
$1409
1495
1573
$1678
1780
1874
$1745
1851
1949
Features
38"
50"
To Order, Specify:
• Includes worksurface and tie plate.
• Wood veneer worksurface with:
• –3mm edgeband (K) on user edge and 1mm edgeband on
back, or
• –Cascade (M) user edge and 1mm edgeband on back.
• Worksurfaces predrilled to accept most support options.
• Optional wireway can be specified to accommodate panel
end-of-run trim.
• Optional wireway will be Charcoal. Refer to Specification
Guide for wireway details.
• Depths and widths shown in nominal dimensions.
Specification Tips
30"
WUDC-3830-W
WUDC-5030-W
62"
30"
WUDC-6230-W
• Designed to be mounted on UniGroup Too, UniGroup and
PLACES.
• Worksurface support specific to product line; must be
separately specified.
• –Support column or leg
• –Worksurface support panel
• –Standard link cantilever bracket.
• –In addition to a column support or leg, two flush mount
plates are required and must be separately specified.
• If using end-of-run finish post specify notched or curved
wireway option.
Note: Grain direction will run across 62′′(1575mm)-wide
conference end worksurface.
244
April 2008 / USA
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
Wood Edgeband or Cascade Wood Edge
1) Product number.
2) Wood finish color.
1 Edge Options:
K Wood Edgeband
M Wood Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
UniGroup Too Price List
Adaptable Worksurfaces — Wood
Key Conference End
Depth
Width
Wood
Number
38′′(965mm)
50′′(1270mm)
30′′(762mm)
30′′(762mm)
36′′(914mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
WURY-3830-W
WURY-5030-W
WURY-5036-W
WURY-6236-W
WURY-6242-W
WURY-6248-W
62′′(1575mm)
1 2 3
(K)
Wood
Edgeband
Group I
(K)
Wood
Edgeband
Group II
(M)
Wood
Cascade
Group I
(M)
Wood
Cascade
Group II
$1718
$1730
1752
$1725
1777
1854
$1805
$1818
1841
$1812
1867
1948
$2153
$2389
$2420
$2374
$2454
$2561
$2240
$2477
$2509
$2461
$2544
$2655
Features
To Order, Specify:
• Includes worksurface and tie plate.
• Wood veneer worksurface with:
• –3mm edgeband (K) on user edge and 1mm edgeband on
back, or
• –Cascade (M) user edge and 1mm edgeband on back.
• Worksurfaces predrilled to accept most support options.
• Wireway along back edge is Charcoal. Refer to Specification
Guide for wireway details.
• Depths and widths shown in nominal dimensions.
• Wireway required to accommodate end of run trim.
38"
Depth
Specification Tips
30"
WURY-3830-W
50"
Depth
Width
30"
36"
• Designed to be mounted on UniGroup Too, UniGroup and
PLACES.
• Worksurface support specific to product line; must be
separately specified.
• –Support column or leg
• –Worksurface support panel
• –Standard link cantilever bracket.
• –In addition to a column support or leg, two flush mount
plates are required and must be separately specified.
• If using end-of-run finish post specify notched or curved
wireway option.
Wood Edgeband or Cascade Wood Edge
1) Product number.
2) Wood finish color.
1 Edge Options:
K Wood Edgeband
M Wood Cascade
2 Core Options:
S
Standard
G Green, add $94 list.
3 Wireway Options:
A Notched
B Curved
C Without
Note: Grain direction will run across 62′′(1575mm)-wide
conference end worksurface.
WURY-5030-W
WURY-5036-W
62"
Depth
Width
36"
42"
48"
WURY-6236-W
WURY-6242-W
WURY-6248-W
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
245
UniGroup Too Price List
Adaptable Worksurfaces — Wood
120В° Link
Depth
Wood
Number
18′′(457mm)
24′′(610mm)
30′′(762mm)
WUDZ-1820-WK
WUDZ-2426-WK
WUDZ-3032-WK
1
C
C
C
Features
Specification Tips
246
• Designed to be mounted on UniGroup Too, UniGroup and
PLACES.
• Support column, leg or worksurface support panel may be
used dependent upon application.
• Use with Corner, 120° Wrap-Around worksurfaces.
• Worksurface support specific to product line; must be
separately specified.
• –Standard link cantilever bracket
• –Tie plates with18′′(457mm) depth
• –Flush mount plates with 24′′(610mm)-30′′(762mm) depth
• Due to manufacturing restrictions, not available with
wood Cascade edge.
April 2008 / USA
(K)
Wood
Edgeband
Group II
$ 651
735
1009
$ 684
772
1059
To Order, Specify:
• Includes worksurface and tie plate.
• Wood veneer worksurface with:
• –3mm edgeband (K) on user edge and 1mm edgeband on
sides and back, or
• –Cascade (M) user edge and 1mm edgeband on back.
• Worksurfaces predrilled to accept most support options.
• Depths and widths shown in nominal dimensions.
WUDZ-W
(K)
Wood
Edgeband
Group I
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
Wood Edgeband
1) Product number.
2) Wood finish color.
1 Core Options:
S
Standard
G Green, add $94 list.
UniGroup Too Price List
Worksurface Supports
for use with UniGroup Too, UniGroup & PLACES
Standard Cantilever Bracket
ZEBD-1600
(Right-hand shown)
Height
Width
Depth
Description
Number
Price
9′′(229mm)
1 5/8′′(41mm)
16 1/2′′(419mm)
Pair
Left-hand
Right-hand
ZEBD-1600-PP
ZEBD-1600-PL
ZEBD-1600-PR
$77
41
41
Features
To Order, Specify:
• Includes one right- and/or one left-handed bracket
and mounting screws.
• Provides cantilever support for the left and/or right
side of worksurface.
• Installs in panel side trim rail.
• Cantilever bracket can be used on either a
18′′(457mm)-, 24′′(610mm)- or 30′′(762mm)-deep
worksurface.
• Mounts worksurface in one inch vertical increments
from a minimum of 15′′(381mm) high.
• Provides clear access leg swing when supporting
24′′(610mm)- and 30′′(762mm)-deep worksurfaces at
standard 29′′(737mm) height.
• Standard in Charcoal finish only.
1) Product number.
(No finish specification required.)
Available on RUSH.
Standard Mini Cantilever
Bracket
ZEBD-1000
(Right-hand shown)
9′′(229mm)
1 5/8′′(41mm)
10 1/2′′(267mm)
Pair
Left-hand
Right-hand
ZEBD-1000-PP
ZEBD-1000-PL
ZEBD-1000-PR
$102
53
53
Features
To Order, Specify:
• Includes one right- and/or one left-handed bracket
and mounting screws.
• Provides cantilever support for the left or right side of
worksurface.
• Installs in panel side trim rail.
• Cantilever bracket to be used on 18′′(457mm)- deep
rectangular radius end worksurface with T-mold or
edgeband.
• Mounts worksurface in one inch vertical increments
from a minimum of 15′′(381mm) high.
• Standard in Charcoal finish only.
1) Product number.
(No finish specification required.)
Available on RUSH.
Standard Link Cantilever
Bracket
ZEBL-1600
9′′(229mm)
3 3/4′′(95mm)
16 1/2′′(419mm)
Pair
Left-hand
Right-hand
ZEBL-1600-PP
ZEBL-1600-PL
ZEBL-1600-PR
$102
53
53
Features
To Order, Specify:
• Includes one right- and/or one left-handed bracket,
with attached angle bracket and mounting screws.
• Provides cantilever support for the left or right side of
conference end, key conference end and 120В° link
and the adjoining worksurface.
• Installs in panel side trim rail.
• Cantilever bracket can be used on either a
18′′(457mm)-, 24′′(610mm)- or 30′′(762mm)-deep
worksurface.
• Mounts worksurface in one inch vertical increments
from a minimum of 15′′(381mm) high.
• Provides clear access leg swing when supporting
24′′(610mm)- and 30′′(762mm)-deep worksurfaces at
standard 29′′(737mm) height.
• Standard in Charcoal finish only.
1) Product number.
(No finish specification required.)
Available on RUSH.
Left
Right
Specification Tip
• To be used with conference end, key conference
end, D-shape ender and 120В° link only.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
247
UniGroup Too Price List
Worksurface Supports
for use with UniGroup Too, UniGroup & PLACES
Standard Snap-n-Fit Cantilever
Bracket for Rectangular
Worksurfaces
ZEBS-1900
Height
Depth
Description
Number
Price
10 1/2′′(267mm)
19′′(483mm)
Pair
Left-hand
Right-hand
ZEBS-1900-PP
ZEBS-1900-PL
ZEBS-1900-PR
$100
51
51
Features
To Order, Specify:
• Includes one right- and/or one left-handed bracket,
U-channel and mounting screws.
• Provides cantilever support for the left and/or right
side of worksurface.
• Installs in panel side trim rail.
• Mounts worksurface in one inch vertical increments
from a minimum of 15′′(381mm) high.
• Provides clear access leg swing when supporting
24′′(610mm)- and 30′′(762mm)-deep worksurfaces at
standard 29′′(737mm) height.
1) Product number.
2) Non-metallic trim color.
Available on RUSH.
Specification Tips
• Worksurfaces are predrilled for snap-n-fit cantilevers.
• Cantilever bracket can be used on either a
24′′(610mm)- or 30′′(762mm)-deep worksurface.
• Cannot be used on 18′′(457mm)-deep worksurfaces.
Standard Snap-n-Fit Mini
Cantilever Bracket
ZEBS-1200
10 1/2′′(267mm)
12′′(305mm)
Pair
Left-hand
Right-hand
Features
To Order, Specify:
• Includes one right- and/or one left-handed bracket,
U-channel and mounting screws.
• Provides cantilever support for the left or right side of
worksurface.
• Installs in panel side trim rail.
• Mounts worksurface in one inch vertical increments
from a minimum of 15′′(381mm) high.
1) Product number.
Available on RUSH.
Specification Tips
• Worksurfaces are predrilled for snap-n-fit cantilevers.
• Cantilever bracket can be used on
18′′(457mm)-deep rectangular worksurfaces,
18′′(457mm) to 24′′(610mm)-deep rectangular radius
end, 24′′(610mm) to 30′′(762mm)-deep corner 90°
split top and rectangular split top worksurfaces.
248
April 2008 / USA
ZEBS-1200-PP
ZEBS-1200-PL
ZEBS-1200-PR
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Non-metallic trim color.
$100
51
51
UniGroup Too Price List
Worksurface Supports
for use with UniGroup Too, UniGroup & PLACES
Standard Snap-n-Fit
Cantilever Bracket for
Corner Worksurface
Depth
Height
Description
Number
Price
19′′(483mm)
10 1/2′′(267mm)
Pair
ZEBC-1900-PP
$100
Feature
To Order, Specify:
• Includes one right and one left-hand cantilever, two
U-channels (1 corner, 1 rectangular) and mounting screws.
1) Product number.
Available on RUSH.
2) Non-metallic trim color.
Specification Tips
ZEBC-1900
• Worksurfaces are predrilled for snap-n-fit cantilevers.
• To be used with 24′′(610mm)-deep or 30′′(762mm)-deep
90В° and 120В° corner and extended worksurfaces.
• Exception: Not to be used with 24′′(610mm)-deep, 90°
split top corner worksurface or 24′′(610mm)-deep
rectangular split top worksurface.
Standard Snap-n-Fit Mini
Cantilever Bracket for Corner
Worksurface
12′′(267mm)
10 1/2′′(267mm)
Pair
ZEBC-1200-PP
Feature
To Order, Specify:
• Includes one right and one left-hand cantilever, two
U-channels (1 corner, 1 rectangular) and mounting screws.
1) Product number.
Available on RUSH.
$100
2) Non-metallic trim color.
Specification Tips
• Worksurfaces are predrilled for snap-n-fit cantilevers.
• To be used with 18′′(457mm)-deep 90° and 120° corner
and extended worksurfaces.
• To be used with 24′′(610mm)-deep 90° split top corner
worksurfaces.
ZEBC-1200
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
249
UniGroup Too Price List
Worksurface Supports
for use with UniGroup Too, UniGroup & PLACES
Side Bracket
ZEBA-0000
(Right-hand)
(Left-hand)
Depth
Width
Height
Description
Number
Price
1 1/2′′(38mm)
2 5/8′′(67mm)
2′′(51mm)
Left
Right
ZEBA-0000-PL
ZEBA-0000-PR
$14
14
Features
To Order, Specify:
•
•
•
•
1) Product number.
(No finish specification required.)
Includes one left- or right-hand bracket and mounting screws.
Mounts ends of rectilinear worksurface to adjacent panel.
Worksurface depth and return panel width must be equal.
Standard in Charcoal finish only.
Available on RUSH.
Specification Tip
• Not recommended for use with convergent worksurface.
Convergent Mount Bracket
ZEBV-0000
(Right-hand)
Flush Mount Plate
ZUBF-0000
1 7/8′′(48mm)
4 1/4′′(108mm)
4 3/4′′(121mm)
Left
Right
ZEBV-0000-PL
ZEBV-0000-PR
Features
To Order, Specify:
• Includes one left- or right-hand bracket, mounting screws and
anti-dislodgement clip.
• Mounts one corner of straight end of convergent worksurface
to panel side rails.
• Standard in Charcoal finish only.
1) Product number.
(No finish specification required.)
$19
19
Available on RUSH.
3′′(76mm)
4′′(102mm)
ZUBF-0000-PN
Features
To Order, Specify:
• Includes one bracket and mounting screws.
• Mounts straight end of convergent worksurfaces or
conference end worksurfaces to panel-hung worksurfaces.
• Provides 90° attachment of two worksurfaces at the same
height.
• Standard in Charcoal finish only.
1) Product number.
(No finish specification required.)
$19
Available on RUSH.
Rear-Corner Bracket
ZEBR-0000
1 1/2′′(38mm)
2 5/8′′(67mm)
2′′(51mm)
ZEBR-0000-PN
Features
To Order, Specify:
• Includes one left-hand bracket and mounting screws.
• Attaches rear corner of worksurface to left hand side trim rail
of panel.
• Standard in Charcoal finish only.
1) Product number.
(No finish specification required.)
$14
Available on RUSH.
Specification Tip
• Required for all corner worksurfaces.
Counter Top Brackets
Z2BT-0000
ZEBT-0000
ZHBT-0000
Description
Number
Price
UniGroup Too for Square Painted Top Cap
UniGroup for Radius Steel Top Cap
PLACES for Low Profile Steel/Wood Top Cap
Z2BT-0000-PNE
ZEBT-0000-PNE
ZHBT-0000-PNE
$30
30
30
Feature
To Order, Specify:
• Includes countertop brackets and screws to support
countertops up to 60′′(1524mm) wide. For wider widths order
additional brackets as needed so that brackets are positioned
a maximum of 60′′(1524mm) apart.
1) Product number.
Specification Tips
• For UniGroup radius wood top cap, specify UniGroup for
radius steel top cap and add field supplied spacers to
accommodate height difference.
• Unigroup Too for square painted top cap brackets are
available in Metallic finish.
250
April 2008 / USA
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Trim color.
UniGroup Too Price List
Adaptable Worksurface Supports
for use with UniGroup Too, UniGroup & PLACES
Pedestal-to-Panel Bracket
Height
Depth
Description
Number
Price
2′′(51mm)
27 1/4′′(692mm)
Laminate Edgeband, Left-hand
Laminate Edgeband, Right-hand
Laminate Cascade, Left-hand
Laminate Cascade, Right-hand
ZEBN-0000-PLJ
ZEBN-0000-PRJ
ZEBN-0000-PLV
ZEBN-0000-PRV
$141
141
$141
141
Features
To Order, Specify:
• Includes one handed bracket and mounting screws.
• Installs in side trim rail slots and attaches to the back side of
an attached pedestal.
• Bracket is predrilled for attachment to pedestal.
1) Product number.
2) Trim color. $8 upcharge (list) for Metallic trim
color.
Available on RUSH.
Specification Tips
ZEBN-0000
• Worksurface and pedestal have to be same depth (nominal).
• Not for use with T-mold edge worksurface.
• Not for use with lateral files.
Worksurface Support Panel —
Laminate
ZEFS-LNE
T-Mold
Edgeband
Cascade
Worksurface
Height
Thickness
Depth
Number
27 7/8′′(708mm)
1 1/2′′(38mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
ZEFS-1200-LNE
ZEFS-1800-LNE
ZEFS-2400-LNE
ZEFS-3000-LNE
Features
To Order, Specify:
• Includes support panel with glides and hardware.
• Installs in panel side trim rails and attaches under the end of
a worksurface.
• Provides full support for one end of equal depth
worksurfaces.
• Recommended in heavy loading conditions to eliminate front
end deflection or to replace return panel.
• Non-handed design may be installed in left-hand, right-hand
or shared configuration, and enhances reconfiguration
possibilities.
• High-pressure laminate surfaces with plastic edge trim, 3mm
radiused user edge provides soft access to knee space.
• Adjustable glides provide a maximum of 2′′(51mm) of height
adjustment.
1) Product number.
1
Price
$246
262
281
301
2) Trim color.
1 Edge Options:
T
T-Mold
J
Edgeband
V
Cascade
Available on RUSH.
Specification Tips
• Specify worksurface support panel to match worksurface
edge option.
• Actual depth varies depending on worksurface edge option.
Worksurface Support Panel —
Wood
ZEFS-WNE
Edgeband
Cascade
27 7/8′′(708mm)
1 1/2′′(38mm)
12′′(305mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
ZEFS-1200-WNE
ZEFS-1800-WNE
ZEFS-2400-WNE
ZEFS-3000-WNE
Features
To Order, Specify:
• Includes support panel with glides and hardware.
• Installs in panel side trim rails and attaches under the end of
a worksurface.
• Provides full support for one end of equal depth
worksurfaces.
• Recommended in heavy loading conditions to eliminate front
end deflection or to replace return panel.
• Non-handed design may be installed in left-hand, right-hand
or shared configuration, and enhances reconfiguration
possibilities.
• Wood surface with wood edge trim.
• Adjustable glides provide a maximum of 2′′(51mm) of height
adjustment.
1) Product number.
$438
454
468
517
2) Wood finish color.
1 Edge Options:
K Wood Edgeband
M Wood Cascade
Available on RUSH.
Specification Tips
• Specify worksurface support panel to match worksurface
edge option.
• Actual depth varies depending on worksurface edge option.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
251
UniGroup Too Price List
Worksurface Supports
for use with UniGroup Too, UniGroup & PLACES
Straight Leg Basic
WUCL-0001
Class CA
Number
Price
WUCL-0001
$101
Features
To Order, Specify:
• Includes one leg and mounting screws.
• 4′′(102mm) glide adjustment range allows worksurface
heights from 27′′(686mm) to 31′′(787mm).
• 2 1/4′′(57mm) diameter column includes 6′′(152mm)-diameter
top plate.
• Standard in Charcoal finish only.
• Shipped assembled.
1) Product number.
(No finish specification required.)
Available on RUSH.
Specification Tip
• Predrilled for convergent worksurfaces and end-of-run
worksurface application.
Straight Leg Basic with Caster
NCL
Class FA
Description
Number
Price
Leg with locking caster
Leg with non-locking caster
NCL-1-CL
NCL-1-C
$112
112
Features
To Order, Specify:
• Includes one leg and mounting hardware.
• 4′′(102mm) caster adjustment range allows worksurface
heights from 27′′(686mm) to 31 1/2′′(800mm).
• 2 1/4′′(57mm) diameter column includes 6′′(152mm) diameter
top plate and mounting hardware.
• Standard in Charcoal finish only.
• Shipped assembled.
1) Product number.
(No finish specification required).
Available on RUSH.
Specification Tips
• Straight leg should be installed in predrilled worksurfaces.
• Freestanding applications require specifying two locking and
two non-locking casters or four glides.
Support Column
WUCC-0004
Features
To Order, Specify:
• Includes one column and mounting screws.
• Column adjusts vertically for worksurface heights from
26′′(660mm) to 30′′(762mm).
• 3′′(76mm)-diameter column includes 6′′(152mm)- square top
plate.
1) Product number.
$227
2) Trim color. $12 upcharge (list) for Metallic trim
color.
Available on RUSH.
WUCC-0004
Class CA
Adjustable Height Disc Base
Diameter
21′′(533mm)
ZZFZ-2121-PNF
Class CA
April 2008 / USA
Price
ZZFZ-2121-PNF
$560
Features
To Order, Specify:
• Includes base, column and mounting screws.
• For use in panel mounted applications only.
1) Product number.
Available on RUSH.
Specification Tips
• Do not use as freestanding table base.
• 5′′ adjustment range allows worksurface heights of
27′′(686mm) to 32′′(813mm).
252
Number
SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Trim color. $12 upcharge (list) for Metallic trim
color.
UniGroup Too Price List
Worksurface Accessories
for use with UniGroup Too, UniGroup & PLACES
Double Support Leg
Height (Adjustable)
Depth
Number
Price
27′′(686mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
ZZFK-1800-PNFG
ZZFK-2400-PNFG
ZZFK-3000-PNFG
$403
426
451
Features
To Order, Specify:
• Includes one double leg and mounting hardware.
• Leg may be installed in left-hand or right-hand configuration.
• 6′′ adjustment range allows worksurface heights from
26′′(660mm) to 32′′(813mm).
• Provides full support for one end of equal depth worksurface.
1) Product number.
2) Trim color. $12 Upcharge (list) for Metallic trim
color.
Specification Tips
ZZFK
• One end of worksurface must be panel attached, not to be
used as freestanding.
• Double leg with glide can be used to replace support post or
support column.
Class CA
Dual-Leg Base
HCC-0002
Number
Price
27 3/4′′(705mm)
HCC-0002
$348
Features
To Order, Specify:
• Includes fixed-height tubular legs and framing members with
sheet steel curved end panel.
• May be used in conjunction with modesty panel, see below.
• Adjusts vertically up to 1 1/4′′(32mm).
1) Product number.
2) Non-metallic trim color.
Class BA
Modesty Panel
HM
Height
Class BA
Single Support Leg
Height
Width
Description
Number
Price
9 1/4′′(235mm)
28′′(711mm)
40′′(1016mm)
52′′(1321mm)
40′′(1016mm)
52′′(1321mm)
For 48′′(1219mm) x 30′′(762mm) surface
For 60′′(1524mm) x 30′′(762mm) surface
For 72′′(1829mm) x 30′′(762mm) surface
For 60′′(1524mm) x 36′′(914mm) surface
For 72′′(1829mm) x 36′′(914mm) surface
HM-4830
HM-6030
HM-7230
HM-6036
HM-7236
$162
203
254
203
254
Features
To Order, Specify:
• Includes attachment hardware.
• For use only with Dual-Leg Base, see above.
• Recommended only for panel mounted convergent
worksurfaces.
• Mountable on left- or right-side under convergent
worksurface.
1) Product number.
2) Non-metallic trim color.
Height
Width
Depth
Description
Number
Price
28′′(711mm)
1 1/8′′(29mm)
3 1/4′′(83mm)
Single Post with Glide
ZUFJ-0101-PNFG
$162
Features
To Order, Specify:
• Includes one single post and mounting hardware.
• Glide provides 1/2′′ of height adjustment.
1) Product number.
Specification Tip
2) Trim color. $12 upcharge (list) for Metallic trim
color.
• May be used for worksurface applications.
• One end of worksurface must be panel attached, not to be
used as freestanding.
ZUFJ-0101-PNFG
Support Post
Class CA
Height (Adjustable)
Description
Number
Price
26′′(660mm)/30′′(762mm)
Single post with glide, adjustable
Single post with caster, adjustable
ZZFJ-0101-PNFG
ZZFJ-0101-PNFC
$215
215
Features
To Order, Specify:
• Includes one single post and mounting hardware.
• 6′′ height adjustment (26′′(660mm)-32′′(813mm)).
1) Product number.
Specification Tip
2) Trim color. $12 Upcharge (list) for Metallic trim
color.
• May be used for worksurface and freestanding table
applications.
ZZFJ
Class CA
SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
253
UniGroup Too Price List
Worksurface Accessories
for use with UniGroup Too, UniGroup & PLACES
Horizontal Wire Manager
WUAW-1500-PNH
Class CA
Wire Management Loop
HNEH-8
Class BA
Depth
Width
Height
Number
Price
2′′(51mm)
15′′(381mm)
3′′(76mm)
WUAW-1500-PNH
$128
Features
To Order, Specify:
• Includes a set of ten, plastic wire managers and mounting
screws.
• Manages and stores wire and cables under worksurfaces.
• Standard in Charcoal trim.
1) Product number.
(No finish specification required.)
Available on RUSH.
Installed
Height
Width
Number
Price
4 1/2′′(114mm)
2 3/4′′(70mm)
HNEH-8
$28
Features
To Order, Specify:
• Includes eight (8) wire management loops.
• Manages and stores wires or cables through loops under
worksurfaces or desk tops.
• Install anywhere under worksurfaces in recommended
18′′(457mm) intervals.
• Loop capacity: 19, 25-pair communications cables.
• Standard in charcoal finish color only.
1) Product number.
(No finish specification required.)
Worksurface Grommet
WUAC-WSG
Class CA
Height
Inside
Diameter
Outside
Diameter
Number
Price
1′′(25mm)
2 3/4′′(70mm)
3′′(76mm)
WUAC-WSG
$14
Features
To Order, Specify:
• Includes one cover.
• Must be field-installed.
• Available in charcoal color only.
1) Product number.
(No finish specification required.)
Available on RUSH.
Make-A-Corner
MAC-0001
Height
Width
Number
Price
21 1/8′′(537mm)
26 1/8′′(664mm)
MAC-0001
$127
Features
To Order, Specify:
• Creates an angled edge between two (2) perpendicular
regular worksurfaces.
• Slides over the top of worksurfaces.
• Accommodates an adjustable keyboard or mouse pad track
(screws included).
• Use MAC-0001 for 1 3/16′′(30mm) thick worksurfaces.
1) Product number.
Class AA
254
April 2008 / USA
SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Trim color.
UniGroup Too Price List
Worksurface Accessories
for use with UniGroup Too, UniGroup & PLACES
Length
Number
Price
Worksurface Reinforcement
Channel
16′′(406mm)
24′′(610mm)
32′′(813mm)
39′′(991mm)
47′′(1194mm)
54′′(1372mm)
WUAR-1600-PH
WUAR-2400-PH
WUAR-3200-PH
WUAR-3900-PH
WUAR-4700-PH
WUAR-5400-PH
$24
24
28
28
33
33
WUAR
Features
To Order, Specify:
• Includes metal, u-shaped channel and mounting
screws.
• Field installed, field located and drilled per installation
instructions.
• Worksurface reinforcement channels provide
additional support for laminate or wood worksurfaces
with 50′′ or larger spans that are heavily loaded and
not otherwise supported by mid-span cantilevers,
worksurface supports, legs, or under-worksurface
storage.
1) Product number.
(No finish specification required.)
Available on RUSH.
Application Guidelines
Laminate or Wood Panel Hung Worksurface Applications
(for standard 29′′ high worksurfaces)
General Application/Number:
• 54′′ wide with two suspended pedestals or stationary pedestals over 27′′ in height, use
WUAR-1600-PH.
• 60′′ wide top with two suspended pedestals or stationary pedestals over 27′′ in height, use
WUAR-2400-PH.
• 54′′ wide top with one suspended pedestal or stationary pedestal over 27′′ in height, use
WUAR-3200-PH.
• 60′′ wide top with one suspended pedestal or stationary pedestal over 27′′ in height, use
WUAR-3900-PH.
• 54′′ wide top − no suspended pedestal or stationary pedestal over 27′′ in height, use
WUAR-4700-PH.
• 60′′ wide top − no suspended pedestal or stationary pedestal over 27′′ in height, use
WUAR-5400-PH.
Worksurface reinforcement channels can provide additional strengthening to 50′′ and greater
worksurfaces on like-sized panels where heavy loads are anticipated. Depending on application,
heavily loaded worksurfaces may not need a worksurface reinforcement channel when:
• Support is provided by a third cantilever on 50′′ and greater worksurfaces (spanning multiple
panels) or by using other under-worksurface support methods.
• Fixed/attached pedestals provide under- worksurface support.
• Panel hung worksurfaces wider than 60′′ require more than two cantilevers.
Laminate or Wood Convergent Tops and Convergent Freestanding Units
• 72′′ UniGroup Too, UniGroup and PLACES convergent worksurfaces and wrap-around
convergent worksurfaces, panel hung, or freestanding, use WUAR-3900-PH.
Application Guidelines for using Worksurface Reinforcement Channel
with Under-Worksurface Storage
For UniGroup Too, UniGroup, PLACES worksurfaces at the standard 29′′ height.
• All pedestals under 25′′ in height can be used under a worksurface with a worksurface
reinforcement channel.
• Mobile pedestals over 27′′ in height cannot be used under a worksurface with a worksurface
reinforcement channel. By increasing worksurface height to 30′′, mobile pedestals can be used
with a worksurface reinforcement channel.
• Stationary pedestals can be used in applications with worksurface reinforcement channels.
Refer to Laminate or Wood Panel Hung Worksurface Applications matrix information above
regarding suspended and stationary pedestals.
• In most applications, lateral files or fixed pedestals supply adequate support so that
worksurface reinforcement channels are not needed.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
255
UniGroup Too Price List
Worksurface Accessories
for use with UniGroup Too, UniGroup & PLACES
Application Guidelines for using Worksurface Reinforcement Channel with AKP’s, Center
Drawers, Mouse Pads and CPU Holders
When worksurface reinforcement channels are used, application guidelines for AKP’s, center drawers, mouse
pads, pencil drawers, and shallow drawers change as follows:
• On 30′′(762mm)-deep worksurfaces, all keyboard pads and mouse pads (except AKPM-23-SFM) and all center
drawers, pencil drawers, and shallow drawers [except Jump Stuff drawer (DGPR-C)] can be used with a
worksurface reinforcement channel. For CPU holders, refer to and use the application guidelines for
worksurfaces with one suspended or stationary pedestal.
• On 24′′(610mm)-deep worksurfaces without grommets, only the following keyboard pads and mouse pads with a
track depth of 17′′(432mm) or less can be used:
Description
Number
Adjustable Keyboard Pad
AKPM-17-SLM
Boogie Board
HKTC-17-M
Boogie Board
HKTE-17-M
Boogie Board
HKTC-17-N
Boogie Board
HKTE-17-N
Mouse Pad
HMP-1
Mouse Pad with Horizontal Adjustment
HMP-2
Mouse Pad with Horizontal and Height Adjustment HMP-3
Adjustable Keyboard Pad with Tilt
AKPT-4
Adjustable Keyboard Pad with Tilt
AKPT-4P
• Also on 24′′(610mm)-deep worksurfaces without grommets, the following accessories cannot be used with a
worksurface reinforcement channel: Jump Stuff Pencil + Drawer, all other pencil drawers, center drawers, or
shallow drawers. For CPU holders, refer to the application guidelines for worksurfaces with one suspended or
stationary pedestal.
• On 24′′(610mm)-deep worksurfaces with rear grommets (PLACES, UniGroup and UniGroup Too), the following
accessories cannot be used with a worksurface reinforcement channel: AKP’s, Pencil + Drawer, all other pencil
drawers, center drawers, or shallow drawers. For CPU holders, refer to the application guidelines for
worksurfaces with one suspended or stationary pedestal.
• On 18′′(457mm)-deep worksurfaces, the following accessories cannot be used with a worksurface reinforcement
channel: AKP’s, Jump Stuff Pencil + Drawer, all other pencil drawers, center drawers, or shallow drawers, and
CPU holders.
Power access devices or grommets cannot be installed in a worksurface above a worksurface reinforcement
channel.
256
April 2008 / USA
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Worksurface Accessories
for use with UniGroup Too, UniGroup & PLACES
Shallow Drawer
Height
Depth
Width
Number
Price
3′′(76mm)
15 3/8′′(391mm)
18 1/4′′(464mm)
DS-3
$36
Features
To Order, Specify:
• Shallow drawer has four compartments.
• Drawer does not stack.
• Available in charcoal or gray tone finish colors only.
1) Product number.
2) Trim color.
TR-K Charcoal
TR-G Gray Tone
DS-3
Class AA
Pencil Drawer
1 5/8′′(41mm)
19′′(483mm)
18′′(457mm)
PPD-18
$73
Features
To Order, Specify:
• Includes mounting hardware.
• Mounts separately under worksurface.
• Standard in black finish color only.
1) Product number.
(No finish specification required.)
Available on RUSH.
PPD-18
Class BA
Steel Center Drawer
2′′(51mm)
17 1/2′′(445mm)
19 1/8′′(486mm)
SCD-19
$190
Features
To Order, Specify:
• Includes mounting hardware.
• Standard with lock.
• Standard in charcoal finish color only.
1) Product number.
(No finish specification required.)
SCD-19
Class MA
Pencil + Drawer
Height
Depth
Width
Number
Price
11′′(279mm)
24′′(610mm)
19 1/2′′(495mm)
KUDP-2420
$244
Features
To Order, Specify:
• Multi-purpose drawer provides organization, hanging filing
along with laptop storage.
• Knock-outs at rear of drawer provide electronic charging
access while contents are locked.
• Removable organizing tray.
• Thin profile maximizes knee clearance under front of drawer.
• Standard in black trim color with black locks.
• Standard with lock (shipped separately); keyed-alike and
master keying options available.
1) Product number.
(No finish specification required.)
Available on RUSH.
Specification Tip
• To be mounted below worksurfaces 24′′(610mm) or deeper.
KUDP-2420
Class YA
Height
Depth
Drawer
Width
Number
Wood
Group I
Wood
Group II
3′′(76mm)
18 1/4′′(210mm)
25′′(635mm)
CD-60-W
$257
$281
Wood Center Drawer
Features
To Order, Specify:
• Includes a built-in pencil tray.
• Features full extension slides.
• Attaches under a 20′′(508mm), 24′′(610mm) or 30′′(762mm)
worksurface.
1) Product number.
2) Wood finish color.
CD-60-W
Class OA
SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
257
UniGroup Too Price List
Worksurface Accessories
for use with UniGroup Too, UniGroup & PLACES
Boogie Board Keyboard
Tray with Palm Rest and
Integrated Mouse Pad
HKTC-M
HKTE-M
Height
Depth
Width
Description
Number
Price
5.3′′(135mm)
12′′(305mm)
28′′(711mm)
17′′(432mm) track, Comfort Palm Rest
17′′(432mm) track, Ergonomic Palm Rest
21′′(533mm) track, Comfort Palm Rest
21′′(533mm) track, Ergonomic Palm Rest
HKTC-17-M
HKTE-17-M
HKTC-21-M
HKTE-21-M
$444
444
444
444
Features
To Order, Specify:
• Palm rests available in ergonomic height adjustable or soft
comfort versions.
• Stores under worksurfaces or lift entire tray to pull out. Release
tray and it automatically saves distance-to-desk position.
• Intuitive single lever on front of AKP adjusts both height and tilt.
• Features spring assisted adjustment (with automatic lock) of
6.5′′(165mm) above worksurfaces and 4′′(102mm) below.
• Integrated mouse pad tilts independently of keyboard tray.
• Includes mouse pad insert (not shown) for optional use.
• Mouse pad is interchangeable between right and left hand
applications.
• Ease of modifying positions reduces repetitive stress injuries by
encouraging AKP repositioning throughout the day.
• Superior stability (patented arm mechanism makes for smooth
and stable operation).
• A simple guide for new users located within the AKP for
referencing.
• Keyboard tray and mouse pad tilt +/-15°.
• 360° rotation.
• 17′′(432mm) track fits under worksurfaces 18′′(457mm) or deeper.
• 21′′(533mm) track fits under worksurfaces 22′′(559mm) or deeper.
Recommended for most corner applications.
1) Product number.
2) Finish color.
Boogie Board is available in the following
finish colors:
• TR-0LX Ice (translucent blue)
Keyboard tray in smoke with accents of graphite
(palm rest, mouse pad insert and bottom of
keyboard tray), and black (arm).
• TR-0LU Shadow (translucent charcoal)
Keyboard tray in charcoal with accents of
graphite (palm rest, mouse pad insert and
bottom of keyboard tray), and black (arm).
Positive Tilt Lock-Out Option:
For positive tilt lock-out option (0В° to -15В° tilt
only), add suffix P to the product number.
Example: HKTC-17-MP
Available on RUSH. Does not include positive tilt lock-out option.
Boogie Board Keyboard
Tray with Palm Rest
HKTC-N
HKTE-N
Boogie Board Mouse Pad
12′′(305mm)
21′′(533mm)
17′′(432mm) track, Comfort Palm Rest
17′′(432mm) track, Ergonomic Palm Rest
21′′(533mm) track, Comfort Palm Rest
21′′(533mm) track, Ergonomic Palm Rest
April 2008 / USA
HKTC-17-N
HKTE-17-N
HKTC-21-N
HKTE-21-N
Features
To Order, Specify:
• Palm rests available in ergonomic height adjustable or soft
comfort versions.
• Stores under worksurfaces or lift entire tray to pull out. Release
tray and it automatically saves distance-to-desk position.
• Intuitive single lever on front of AKP adjusts both height and tilt.
• Features spring assisted adjustment (with automatic lock) of
6.5′′(165mm) above worksurfaces and 4′′(102mm) below.
• Ease of modifying positions reduces repetitive stress injuries by
encouraging AKP repositioning throughout the day.
• Superior stability (patented arm mechanism makes for smooth
and stable operation).
• A simple guide for new users located within the AKP for
referencing.
• Keyboard tray and mouse pad tilt +/-15°.
• 360° rotation.
• 17′′(432mm) track fits under worksurfaces 18′′(457mm) or deeper.
• 21′′(533mm) track fits under worksurfaces 22′′(559mm) or deeper.
Recommended for most corner applications.
1) Product number.
1′′(25mm)
11′′(279mm)
Boogie Board is available in the following
finish colors:
• TR-0LX Ice
Keyboard tray in smoke with accents of graphite
(palm rest and bottom of keyboard tray), and
black (arm).
• TR-0LU Shadow
Keyboard tray in charcoal with accents of
graphite (palm rest and bottom of keyboard
tray), and black (arm).
Positive Tilt Lock-Out Option:
For positive tilt lock-out option (0В° to -15В° tilt only),
add suffix P to the product number.
Example: HKTC-17-NP
HKMP-1
Features
To Order, Specify:
• For use with Boogie Board AKP or on top of worksurfaces.
• Integrated teeth allow right- or left-handed keyboard
applications.
• Easily attaches to keyboard tray.
• Includes mouse pad insert (not shown) for optional use.
1) Product number.
Class YA – SIN 711-2; Discount Group XIII
Canadian Conversion Factor: Refer to haworth.com/Canada
$420
420
420
420
2) Finish color.
8′′(203mm)
Available on RUSH.
HKMP-1
258
5.3′′(135mm)
$45
2) Finish color.
Boogie Board mouse pad is available in the
following finish colors:
• TR-0LX Ice (translucent blue)
Mouse pad insert standard in graphite.
• TR-0LU Shadow (translucent charcoal)
Mouse pad insert standard in graphite.
UniGroup Too Price List
Worksurface Accessories
for use with UniGroup Too, UniGroup & PLACES
Height
Adjustable Keyboard Pad
with Swivel Mouse Pad
AKPM-17-SLM
AKPM-21-SLM
6′′(152mm)
Keyboard
Depth
Pad
Width
11 1/2′′(292mm) 19 1/2′′-28′′
(495-711mm)
Description
Number
Price
17′′(432mm) track Comfort Palm Rest
AKPM-17-SLM
$282
21′′(533mm) track Comfort Palm Rest
AKPM-21-SLM
282
Features
To Order, Specify:
• Vertical adjustment range of 6′′(152mm) below
worksurface.
• Keyboard tray and mouse pad tilt +/-15°.
• Integrated Mouse Pad tilts independently of keyboard tray.
• Palm Rest is soft comfort version and standard in graphite
color only.
• Base, mouse pad and mouse pad cover insert standard in
charcoal only.
• Mouse pad is interchangeable between right and left hand
applications and has dual swivel.
• 360° rotation.
• 17′′(432mm) track fits under worksurfaces 18′′(457mm) or
deeper.
• 21′′(533mm) track fits under worksurfaces 22′′(559mm) or
deeper.
• Recommended for most corner applications.
1) Product number.
(No finish specification required.)
Available on RUSH.
Adjustable Keyboard Pad
with Swivel Mouse Pad
AKPM-23-SFM
6′′(152mm)
11 1/2′′(292mm) 19 1/2′′-28′′
(495-711mm)
23′′(584mm) track Comfort Palm Rest
AKPM-23-SFM
Features
To Order, Specify:
• Vertical adjustment range of 12′′(305mm); 6 3/4′′(171mm)
below worksurface and 5 1/4′′(133mm) above.
• Keyboard tray and mouse pad tilt +/-15° using soft touch
knob.
• Integrated Mouse Pad tilts independently of keyboard tray.
• Palm Rest is soft comfort version and standard in graphite
color only.
• Base, mouse pad and mouse pad cover insert standard in
charcoal only.
• Mouse pad is interchangeable between right and left hand
application and has dual swivel.
• 360° rotation.
• 23′′(584mm) track fits under worksurfaces 24′′(610mm)
or deeper.
• Recommended for most corner applications.
1) Product number.
(No finish specification required.)
Class YA – SIN 711-2; Discount Group XIII
Canadian Conversion Factor: Refer to haworth.com/Canada
$386
Positive Tilt Lock-Out Option:
For positive tilt lock-out option (0 to -15В° tilt
only), add suffix P to the product number.
Example: AKPM-23-SFMP
April 2008 / USA
259
UniGroup Too Price List
Worksurface Accessories
for use with UniGroup Too, UniGroup & PLACES
Keyboard Pad / Keyboard Plate Mounting Guidelines on Curved Front Worksurface
NOTE:
Not all AKPs fit on all
worksurfaces.
–Determine applicability by
comparing the radius of corner
worksurfaces with Pad Width.
–Determine track size by
measuring worksurface from
location of grommets or other
obstacles to front edge of
worksurface.
Height
Extended Tilting Keyboard Pad 8′′
(203mm)
AKPS-5
AKPS-5P
Adjustable Keyboard Pad
with Tilt
AKPT-3
AKPT-3P
AKPT-4
AKPT-4P
Maximum
Keyboard Size
19.559′′(497mm)
24.529′′(623mm)
18.582′′(472mm)
19.376′′(492mm)
29.500′′(749mm)
21.702′′(551mm)
22.651′′(575mm)
34.470′′(876mm)
Radius
6′′(152mm)
12′′(305mm)
18′′(457mm)
18′′(457mm)
18′′(457mm)
24′′(610mm)
24′′(610mm)
24′′(610mm)
Pad/Plate
Extension
12′′(305mm)
12′′(305mm)
7.25′′(184mm)
7.50′′(191mm)
12′′(305mm)
7.25′′(184mm)
7.50′′(191mm)
12′′(305mm)
Keyboard
Depth
Pad
Width
Track
5 3/4′′-9′′
(146-229mm)
17′′-22′′
(432-559mm)
21′′
(533mm)
Minimum
Pad/Plate
AKPS-5
AKPS-5
AKP-2
AKPT-3
AKPS-5
AKP-2
AKPT-3
AKPS-5
Palm
Rest
Number
Price
Without
AKPS-5
$492
With
AKPS-5P
Features
To Order, Specify:
• Vertical adjustment range of 8′′(203mm); 6′′(152mm) below
worksurface, 2′′(51mm) above worksurface.
• Tray tilts +15°/-15°.
• Stores under worksurface.
• Up-down adjustment of 8′′(203mm) with knob on lower right
side.
• 360° rotation.
• Fits under worksurfaces 19′′(483mm) or deeper.
• Features spring-assisted height adjustment.
1) Product number.
5 1/2′′
(140mm)
5 3/4′′-9′′
(146mm-229mm)
17-22′′
(432mm-559mm)
21′′
(533mm) track
5 1/2′′
(140mm)
5 3/4′′-9′′
(146mm-229mm)
17-22′′
(432mm-559mm)
17′′
(431mm) track
2) Trim color.
TR-K Charcoal base/Charcoal pad
TR-J Charcoal base/Graphite pad
Without
AKPT-3
$431
With
Without
AKPT-3P
AKPT-4
515
$414
With
AKPT-4P
496
Features
To Order, Specify:
•
•
•
•
1) Product number.
•
•
•
•
•
In-out adjustment of 15 7/8′′(403mm).
Tray tilts +15В°/-0В°.
Stores under worksurface.
Up-down adjustment of 6′′(152mm) with knob on lower right
side.
360В° rotation.
Spring-assisted height adjustment.
AKPT-4 with 17′′(432mm) track fits under worksurfaces
18′′(457mm) or deeper.
AKPT-3 with 21′′(533mm) track fits under worksurfaces
22′′(559mm) or deeper.
Fits under worksurfaces 18′′(457mm) or deeper.
580
2) Trim color.
TR-K Charcoal base/Charcoal pad
TR-J Charcoal base/Graphite pad
Available on RUSH.
Adjustable Keyboard Pad
AKP-2
AKP-2P
5 1/2′′
(140mm)
5 3/4′′-9′′
(146mm-229mm)
17-22′′
(432mm-559mm)
21′′
(533mm)
April 2008 / USA
AKP-2
With
AKP-2P
Features
To Order, Specify:
• In-out adjustment of 12 3/4′′(324mm).
• Stores under worksurface.
• Up-down adjustment of 5 1/2′′(140mm) with knob on lower
right side.
• 360° rotation.
• Fits under worksurfaces 19′′(483mm) or deeper.
1) Product number.
Available on RUSH.
260
Without
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Trim color.
TR-K Charcoal base/Charcoal pad
TR-J Charcoal base/Graphite pad
$368
460
UniGroup Too Price List
Worksurface Accessories
for use with UniGroup Too, UniGroup & PLACES
Adjustable Keyboard Pad —
Fixed Height
AKPF-1
AKPF-1P
Palm Rest
PR-1
Height
Keyboard
Depth
Pad
Width
Track
3 1/2′′
(89mm)
5 3/4′′-9′′
(146mm-229mm)
17-22′′
(432mm-559mm)
17′′
(431mm)
Palm
Rest
Number
Price
Without
AKPF-1
$240
With
AKPF-1P
Features
To Order, Specify:
• In-out adjustment of 12 3/4′′(324mm).
• Stores under worksurface.
• 3′′(76mm) drop from bottom of worksurface to fixed keyboard
pad.
• 360° rotation.
• Fits under worksurfaces 19′′(483mm) or deeper.
1) Product number.
332
2) Trim color.
TR-K Charcoal base/Charcoal pad
TR-J Charcoal base/Graphite pad
Available on RUSH.
1′′
(25mm)
2 1/2′′
(64mm)
19 1/2′′
(495mm)
PR-1
Features
To Order, Specify:
•
•
•
•
•
•
1) Product number.
(No finish specification required.)
Fits AKPS, AKPT, AKP and AKPF.
Adjusts in-out 1 3/4′′(44mm).
Adjusts up-down 1′′(25mm).
Rotates under the keyboard pad for storage.
Field attached.
Standard in charcoal finish color only.
$93
Available on RUSH.
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
261
UniGroup Too Price List
Worksurface Accessories
for use with UniGroup Too, UniGroup & PLACES
Mouse Pad with Horizontal
and Height Adjustment
Height
Depth
Width
Number
Price
3′′(76mm)
12′′(305mm)
8 1/2′′(216mm)
HMP-3
$227
Features
To Order, Specify:
• In/out adjustment of 12 3/4′′(324mm).
• Stores under worksurface on an 18′′(457mm) track at any
angle.
• 360° rotation.
• Features spring-assisted height adjustment.
• Vertical adjustment range of 5 1/2′′(140mm).
• Fits any worksurface 19′′(483mm) or deeper.
• Standard in charcoal finish color only.
1) Product number.
(No finish specification required.)
Available on RUSH.
HMP-3
Mouse Pad with Horizontal
Adjustment
3′′(76mm)
12′′(305mm)
8 1/2′′(216mm)
HMP-2
Features
To Order, Specify:
• In/out adjustment of 12 3/4′′(324mm).
• Stores under worksurface on an 18′′(457mm) track at any
angle.
• 360° rotation.
• Fixed-height pad is 3 1/2′′(89mm) below worksurface top.
• Fits any worksurface 19′′(483mm) or deeper.
• Standard in charcoal finish color only.
1) Product number.
(No finish specification required.)
$173
HMP-2
Mouse Pad
3′′(76mm)
12′′(305mm)
8 1/2′′(216mm)
To Order, Specify:
•
•
•
•
•
1) Product number.
(No finish specification required.)
Stores by rotating pad under worksurface.
360В° rotation.
Fixed-height pad is 3 1/2′′(89mm) below worksurface top.
Fits any worksurface.
Standard in charcoal finish color only.
HMP-1
262
April 2008 / USA
HMP-1
Features
Class AA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
$131
UniGroup Too Price List
Worksurface Accessories
for use with UniGroup Too, UniGroup & PLACES
Monitor Arm в€’ Single
Description
Number
Price
Single Monitor Arm
KUC1-0000-
$480
Features
To Order, Specify:
• Quick-install mechanism allows flat-screen monitors to
quickly and securely snap into position.
• Provides easy adjustment of monitor height and position.
• Vertical adjustment range of 18′′(457mm).
• Cord management reduces workspace clutter.
• Includes desk clamp mounting option.
• Arm standard in silver trim only.
1) Product number.
(No finish specification required.)
Light Monitor Specification:
For 15′′(381mm)-18′′(457mm) monitors that weigh
6-13 lbs., add L to the end of the product number.
Example: KUC1-0000-L
Specification Tips
KUC1-0000
Monitor Arm в€’ Dual or Triple
• Desk clamp can mount on surfaces 2′′(51mm) thick or less.
• Certified VESA® monitor compatible - includes 75mm and
100mm adapter plates.
Dual Monitor Arm
Triple Monitor Arm
Heavy Monitor Specification:
For 19′′(483mm)-21′′(533mm) monitors that weigh
14-21 lbs., add H to the end of the product
number.
Example: KUC1-0000-H
KUC2-0000-H
KUC3-0000-H
$1068
1204
Features
To Order, Specify:
• Allows for installation of two or three flat-screen monitors
above worksurface.
• Provides easy height adjustment.
• Independently adjust the pivot and tilt of each monitor.
• Vertical adjustment range of 18′′(457mm).
• Includes desk clamp mounting options.
• Arm standard in silver trim only.
1) Product number.
(No finish specification required.)
KUC2-0000-H
Specification Tips
• Weight range is 4-19 lbs. per monitor.
• Certified VESA monitor compatible - includes 75mm and
100mm adapter plates.
Triple Monitor Specification Tips
• Weight range is 2-12 lbs. per monitor.
• Certified VESA monitor compatible - includes 75mm and
100mm adapter plates.
KUC3-0000-H
Class YA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
263
UniGroup Too Price List
Adaptable Upper Storage
for use with UniGroup Too, UniGroup, PLACES
Open Shelf, Standard Mount
Height
Width
Number
Price
8′′(203mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
UESN-0824-PM
UESN-0830-PM
UESN-0836-PM
UESN-0842-PM
UESN-0848-PM
UESN-0854-PM
UESN-0860-PM
UESN-0866-PM
UESN-0872-PM
$176
185
193
199
207
211
215
221
226
UESN-PM
Features
To Order, Specify:
• Includes shelf with back stop, end panels and hardware.
• Accepts separately specified task lights.
• Safety interlock prevents dislodgment from panel connector
slots.
• Shelf thickness is 2′′(51mm).
• Shipped unassembled.
1) Product number.
2) Trim color for shelf and end panels.
$23 upcharge (list) for Metallic trim color.
Available on RUSH.
Specification Tips
• Specify separate shelf gang clip NUB-1 for unbalanced
configurations with greater than one row of shelves.
• To be installed in panel trim rails on same size panel or on a
combination of panels that equals the shelf width.
Overhead Storage
Unit / Shelf Gang Clip
Description
Number
Price
One set
NUB-1
$35
Features
To Order, Specify:
• Provides additional stability in unbalanced panel
configurations with adjacent shelves and overheads.
• Gangs adaptable style overheads and shelves.
• Does not gang OneTouch overheads.
• Standard in aluminum finish.
1) Product number.
(No finish specification required.)
NUB-1
264
April 2008 / USA
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Adaptable Upper Storage
for use with UniGroup Too, UniGroup, PLACES
Overhead Storage Unit,
Standard Mount —
Painted, Translucent or
Wood Front
UEFS-PM
UEFF-QM
UEFS-WM
Height
Depth
Width
Painted Door
1 2
Number
Price
16′′(406mm)
14′′(356mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
UEFS-1624-PM
UEFS-1630-PM
UEFS-1636-PM
UEFS-1642-PM
UEFS-1648-PM
UEFS-1654-PM
UEFS-1660-PM
UEFS-1666-PM
UEFS-1672-PM
$467
482
514
531
551
603
656
804
951
Height
Depth
Width
Translucent Door
1 2
Number
White
Price
Patterned
Price
16′′(406mm)
14′′(356mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
UEFF-1624-QM
UEFF-1630-QM
UEFF-1636-QM
UEFF-1642-QM
UEFF-1648-QM
UEFF-1654-QM
UEFF-1660-QM
UEFF-1666-QM
UEFF-1672-QM
$ 606
631
674
695
720
788
857
1049
1240
$ 830
876
939
981
1026
1104
1183
1386
1587
Height
Depth
Width
Wood Door
Number
Wood
Group I
Wood
Group II
16′′(406mm)
14′′(356mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
UEFS-1624-WM
UEFS-1630-WM
UEFS-1636-WM
UEFS-1642-WM
UEFS-1648-WM
UEFS-1654-WM
UEFS-1660-WM
UEFS-1666-WM
UEFS-1672-WM
$ 602
624
667
686
708
775
847
1031
1219
$ 633
657
702
723
747
816
892
1086
1283
Inside Dimensions
Height
12 3/4′′(324mm)
Depth
13 1/4′′(337mm)
1 2
Features
To Order, Specify:
• Includes door front without lock, shelf with back stop, end
panels, and hardware. Optional lock available.
• Locks are available in black or chrome. Lock plug(s) and
key(s) are shipped with random numbering unless they are
specified ��keyed-alike’’ or ��master-keyed’’.
• Accepts separately specified task lights.
• Door stores on top of unit.
• Safety interlock prevents dislodgment from side panel trim rail
slots.
• 66′′(1676mm) and 72′′(1829mm) units have two doors, one
lock per door.
• Shipped unassembled.
1) Product number, including:
Available on RUSH.
1 Lock Options:
N Non-Locking
L
Locking, add $14 list.
2 Close Option:
S
Slow Close, add $240 list. 66′′ and 72′′
wide units, add $480 list.
No Specification required for regular
close.
Specification Tips
2) Trim color for shelf and end panels.
• To be installed in panel side trim rail slots on same size panel
or on a combinations of panels that equal the width of the
storage unit.
• Doors cannot be retrofitted with locks.
• Standard mount overhead storage unit cannot be retrofitted to
up mount overhead storage unit.
• Painted and translucent doors can be field retrofitted with
slow close mechanism from eParts. Wood door requires
purchase of new door with slow close mechanism from
eParts.
• Specify separate shelf gang clip NUB-1 for unbalanced
configurations with greater than one row of storage units.
3) Trim color, translucent color, wood color for
door.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
4) Trim color for lock plug.
$55 upcharge (list) for Metallic trim color.
April 2008 / USA
265
UniGroup Too Price List
Adaptable Upper Storage
for use with UniGroup Too, UniGroup, PLACES
Overhead Storage Unit,
Up Mount — Painted,
Translucent or Wood
Front
Height
Depth
Width
Painted Door
1 2
Number
Price
16′′(406mm)
14′′(356mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
UEGS-1624-PM
UEGS-1630-PM
UEGS-1636-PM
UEGS-1642-PM
UEGS-1648-PM
$664
686
717
736
749
Height
Depth
Width
Translucent Door
1 2
Number
White
Price
Patterned
Price
16′′(406mm)
14′′(356mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
UEGF-1624-QM
UEGF-1630-QM
UEGF-1636-QM
UEGF-1642-QM
UEGF-1648-QM
$ 936
977
1028
1067
1092
$1160
1222
1293
1353
1398
Wood
Group I
Wood
Group II
$820
852
893
918
933
$863
897
940
967
984
UEGS-PM
UEGF-QM
UEGS-WM
Inside Dimensions
Height
12 3/4′′(324mm)
Height
Depth
Width
Wood Door
Number
Depth
13 1/4′′(337mm)
16′′(406mm)
14′′(356mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
UEGS-1624-WM
UEGS-1630-WM
UEGS-1636-WM
UEGS-1642-WM
UEGS-1648-WM
Features
To Order, Specify:
• Includes door front without lock, shelf with full back, end
panels, mount brackets and hardware. Optional lock
available.
• Locks are standard in black or chrome. Lock plug(s) and
key(s) are shipped with random numbering unless they are
specified ��keyed-alike’’ or ��master-keyed’’.
• Accepts separately specified task lights.
• Door stores on top of unit.
• Safety interlock prevents dislodgment from panel side trim rail
slots.
• Shipped assembled.
1) Product number, including:
Available on RUSH.
266
April 2008 / USA
1 2
1 Lock Options:
N Non-Locking
L
Locking, add $14 list.
2 Close Options:
S
Slow Close, add $240 list.
No Specification required for regular
close.
Specification Tips
2) Trim color for shelf and end panels.
• To be installed in panel side trim rail slots on same size panel
or on a combinations of panels that equal the width of the
storage unit.
• Recommended for use with 48′′(1219mm)- or
56′′(1422mm)-high panel configurations.
• Doors cannot be retrofitted with locks.
• Up mount overhead storage unit cannot be retrofitted to
standard mount overhead storage unit.
• Painted and translucent doors can be field retrofitted with
slow close mechanism from eParts. Wood door requires
purchase of new door with slow close mechanism from
eParts.
• Using up mount overheads limits allowable panel runs to 10
feet maximum and requires that worksurfaces use side-mount
brackets, worksurface support panels or other form of floor
support. (Fully cantilevered worksurfaces are not allowed).
Return panels on each end must equal height of panel run
and depth of worksurface.
• Cannot be installed above a slat pad, tackboard,
markerboard, or add-on glazed panel.
3) Trim color, translucent color or wood color for
door.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
4) Trim color for lock plug.
$67 upcharge (list) for Metallic trim color.
UniGroup Too Price List
Adaptable Upper Storage
for use with UniGroup Too, UniGroup, PLACES
Straight Mini Shelf, Standard
Mount
Height
Depth
Width
Number
Price
4 1/4′′(108mm)
6 1/4′′(159mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
UESY-0418-PM
UESY-0424-PM
UESY-0430-PM
UESY-0436-PM
UESY-0442-PM
UESY-0448-PM
$155
161
167
175
183
189
Features
To Order, Specify:
• Includes shelf, brackets, and hardware.
• Shelf thickness is 3/4′′(19mm).
• Shipped unassembled.
1) Product number.
2) Trim color for shelf.
3) Trim color for brackets.
$8 upcharge (list) for Metallic trim color:
Specification Tips
UESY-PM
Corner Mini Shelf, Standard
Mount
• To be installed in connector slots on same size panel or on a
combination of panels that equals the shelf width.
• Support brackets must be installed under shelf surface.
• Designed for lightweight accessories.
• Does not accept separately specified task lights.
4 1/4′′(108mm)
6 1/4′′(159mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
Features
To Order, Specify:
•
•
•
•
1) Product number.
Includes shelf, brackets, and hardware.
Middle of shelf is 15 1/4′′(387mm) deep.
Shelf thickness is 3/4′′(19mm).
Shipped unassembled.
Specification Tips
UESZ-PM
UESZ-0424-PM
UESZ-0430-PM
UESZ-0436-PM
UESZ-0442-PM
UESZ-0448-PM
$300
308
316
333
333
2) Trim color for shelf.
3) Trim color for brackets.
$8 upcharge (list) for Metallic trim color:
• To be installed in connector slots on two panels or on a
combination of panels of equivalent widths in 90В°
configuration.
• Support brackets must be installed under shelf surface.
• Designed for lightweight accessories.
• Does not accept separately specified task lights.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
267
UniGroup Too Price List
Mini Shelves
for use with UniGroup Too, UniGroup, PLACES
Straight Mini-Shelf
Height
Depth
Width
Number
Price
5 1/2′′(140mm)
6 1/4′′(159mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
HMSS-0618
HMSS-0624
HMSS-0630
HMSS-0636
HMSS-0642
HMSS-0648
$153
161
169
175
188
194
HMSS
Corner Mini-Shelf
HMSC
268
April 2008 / USA
Features
To Order, Specify:
•
•
•
•
1) Product number.
Includes brackets and mini-shelf.
Mounts on single or multiple panels of equivalent widths.
Support bracket may be mounted under shelf surface only.
Does not accept task lights.
5 1/2′′(140mm)
6 1/4′′(159mm)
2) Shelf trim color.
3) Bracket trim color.
24′′(610mm) x 24′′(610mm)
30′′(762mm) x 30′′(762mm)
36′′(914mm) x 36′′(914mm)
42′′(1067mm) x 42′′(1067mm)
48′′(1219mm) x 48′′(1219mm)
HMSC-0624
HMSC-0630
HMSC-0636
HMSC-0642
HMSC-0648
Features
To Order, Specify:
• Includes brackets and corner mini-shelf.
• Mounts on two panels of equivalent widths in 90°
configuration.
• Middle of shelf is 16′′(406mm) deep.
• Shelf thickness is 3/4′′(19mm).
• Support bracket may be mounted under shelf surface only.
• Does not accept task lights.
1) Product number.
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Shelf trim color.
3) Bracket trim color.
$309
334
353
369
390
UniGroup Too Price List
OneTouch Overhead Storage Unit
for use with UniGroup Too, UniGroup, PLACES
Overhead Storage Unit
HORS
Class BA
Interior Dimensions
Height
14′′(356mm)
Depth
14 1/2′′(368mm)
Height
Depth
Width
Number
Price
16′′(406mm)
18′′(457mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
HORS-30
HORS-36
HORS-42
HORS-48
HORS-60
$803
834
871
904
952
Features
To Order, Specify:
• Price includes door front with lock, shelf and attachment
hardware.
• Steel shelf with fully enclosed back. Injection molded ABS
front door.
• Locks are available in black or chrome. Lock plug(s) and
key(s) are shipped with random numbering unless they are
specified ��keyed-alike’’ or ��master-keyed’’.
• Off-modular design.
• Accepts separately specified task lighting.
• Keyed alike and master keying options available.
• Only one row of units can be mounted on panel
configurations with unbalanced components application.
• Ships fully assembled.
1) Product number.
2) Finish color.
3) Trim color for lock plug.
Available on RUSH.
Shelf depth 12 1/2′′(318mm)
*Closed height=16′′(406mm)
Opened height=19′′(483mm)
NOB-1
OneTouch Gang Clip
NOB-1
Class FA
Features
To Order, Specify:
• Includes one bracket and attachment screws.
• Provides additional stability in unbalanced panel
configurations with adjacent overheads.
• Recommended for stack kits that have one row of OneTouch
overhead storage units.
1) Product number.
SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
$35
2) Finish color.
April 2008 / USA
269
UniGroup Too Price List
UniGroup Shelves and Flipper Doors
for use with UniGroup Too, UniGroup, PLACES
Low Shelf
SL
Height
Depth
Width
Number
Price
8 3/4′′(222mm)
13 5/8′′(346mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
SL-2
SL-30
SL-3
SL-42
SL-4
SL-5
$193
197
212
212
212
226
Features
To Order, Specify:
• Includes shelf, end supports, and connection hardware.
• 1/2′′(13mm) thick shelf end with radius corners and T-mold
edge.
• Shelf pan is 1 1/4′′(32mm) thick.
• Accepts separately specified task lights.
1) Product number.
2) End support Videne color.
3) T-molding and end cap trim color.
4) Shelf trim color.
Available on RUSH.
Regular Shelf
SR
15 3/4′′(400mm)
13 5/8′′(346mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
SR-2
SR-30
SR-3
SRS-42
SR-4
SR-5
$197
203
209
214
219
242
Features
To Order, Specify:
• Includes shelf, end supports, and connection hardware.
• 1/2′′(13mm) thick shelf end with radius corners and T-mold
edge.
• Shelf pan is 1 1/4′′(32mm) thick.
• Accepts separately specified flipper door (FDRF, FDRV).
• Accepts separately specified task lights.
1) Product number.
2) End support Videne color.
3) T-molding and end cap trim color.
4) Shelf trim color.
Available on RUSH.
Regular Flipper Door Front —
Fabric or Laminate Door Front
Fabric Number
Height
Depth
Width
15 5/8′′(397mm) 13 1/2′′(343mm) 24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
1
FDRF-2FDRF-30FDRF-3FDRF-42FDRF-4FDRF-5-
Fabric Grade
A
B
C
D
E
F
G
$378
391
412
428
470
561
$445
458
493
509
551
667
$450
463
498
514
556
672
$456
469
503
519
561
678
$461
474
509
525
567
683
$391
404
431
447
489
585
$418
431
458
470
516
618
Laminate Number
Height
Depth
Width
15 5/8′′(397mm) 13 1/2′′(343mm) 24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
FDRF
FDRV
1
FDRV-2FDRV-30FDRV-3FDRV-42FDRV-4FDRV-5-
Price
$349
359
390
404
420
517
Features
To Order, Specify:
•
•
•
•
•
•
Includes top and door only; order shelf unit separately.
For use with UniGroup regular shelves (SR, SRS).
Standard with chrome lock plug and bezel.
Top and door pre-assembled.
Door interior is black only.
Available without lock.
1) Product number, including:
Available on RUSH.
2) Door front fabric/colorway or laminate surface
color.
1 Lock Option:
N Non-Locking
L
Locking, add $16 list.
3) Door vinyl edge trim color.
4) Top trim color.
270
April 2008 / USA
Class AA – SIN 711-1; Discount Group 1
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
PLACES Shelves
for use with UniGroup Too, UniGroup and PLACES
Low Shelf — Painted
Height
Depth
Width
Number
Price
9 3/4′′(248mm)
13 3/4′′(349mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HSL-0024
HSL-0030
HSL-0036
HSL-0042
HSL-0048
HSL-0054
HSL-0060
$225
231
237
243
251
260
266
HSL
Features
To Order, Specify:
• Includes shelf, end supports, and connection hardware.
• 3/4′′(19mm) thick vinyl covered end supports and
1 1/4′′(32mm) thick painted shelf.
• Interior shelf depth is 12 1/4′′(311mm).
• Interior height is 7 1/2′′(191mm).
• Accepts separately specified task lights.
1) Product number.
2) End support trim color.
3) Shelf trim color.
Available on RUSH.
Regular Shelf — Painted
HSR
16 3/4′′(425mm)
13 3/4′′(349mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HSR-0024
HSR-0030
HSR-0036
HSR-0042
HSR-0048
HSR-0054
HSR-0060
Features
To Order, Specify:
• Includes shelf, end supports, and connection hardware.
• 3/4′′(19mm) thick vinyl covered end supports and
1 1/4′′(32mm) thick painted shelf.
• Interior shelf depth is 12 1/4′′(311mm)
• Interior height is 14 1/8′′(359mm)
• Accepts separately specified flipper door (HFDR-F, HFDR-P).
• Accepts separately specified task lights.
1) Product number.
$231
237
243
251
260
272
285
2) End support trim color.
3) Shelf trim color.
Available on RUSH.
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
271
UniGroup Too Price List
PLACES Flipper Doors/Overhead Storage
for use with PLACES (HSR) Regular Shelf
Height
Depth
Width
Fabric
Number
Fabric Grade
A
B
C
D
E
F
G
$529
545
579
602
646
726
781
$534
550
584
607
651
730
785
$539
555
590
613
657
736
791
$556
571
595
618
662
747
802
Regular Flipper Door Front —
Fabric or Laminate
16 3/4′′(425mm) 13 3/4′′(349mm) 24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HFDR-0024-F
HFDR-0030-F
HFDR-0036-F
HFDR-0042-F
HFDR-0048-F
HFDR-0054-F
HFDR-0060-F
$455
471
491
514
558
610
665
HFDR-F
HFDR-P
Height
Laminate
Number
Price
HFDR-0024-P
HFDR-0030-P
HFDR-0036-P
HFDR-0042-P
HFDR-0048-P
HFDR-0054-P
HFDR-0060-P
$425
441
468
491
512
570
625
Depth
Width
16 3/4′′(425mm) 13 3/4′′(349mm) 24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
$469
485
512
535
579
636
691
$498
514
541
564
608
673
728
Features
To Order, Specify:
•
•
•
•
•
1) Product number.
Includes top, door, and lock; order shelf unit separately.
Standard chrome lock and bezel.
For use with PLACES regular shelves (HSR).
Top and door pre-assembled.
Door interior surface is black only.
2) Door front fabric/colorway or laminate color.
3) Top/pull trim color.
Available on RUSH.
Regular Overhead — Painted
Case — Wood Door Front —
Wood Pull
HOR3-WP
272
April 2008 / USA
Height
Depth
Width
Number
Wood
Group I
Wood
Group II
16 3/4′′(425mm)
13 3/4′′(349mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HOR3-0024-WP
HOR3-0030-WP
HOR3-0036-WP
HOR3-0042-WP
HOR3-0048-WP
HOR3-0054-WP
HOR3-0060-WP
$ 700
743
781
821
861
902
1004
$ 718
762
800
841
882
923
1027
Features
To Order, Specify:
• Includes door, shelf, end supports, connection hardware
and lock.
• Standard chrome lock and bezel.
• Door surface is wood veneer.
• Shelf is painted metal.
• Wood pull.
• Accepts separately specified task lights.
1) Product number.
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Door/pull wood finish color.
3) Case trim color.
4) Shelf trim color.
UniGroup Too Price List
Shelf Accessories
Adaptable/OneTouch Shelf
Dividers
Height
Depth
Width
Number
Price
4′′(102mm)
13 1/4′′(337mm)
1 3/4′′(44mm)
NADR-8
$157
Features
To Order, Specify:
• Includes box of eight shelf dividers.
• To be used to divide space laterally on panel mounted
shelves or up mount shelves, standard or up mount overhead
storage units, or vertical storage units, Adaptable open shelf,
Adaptable overhead storage unit and OneTouch storage unit.
1) Product number.
2) Trim color.
$10 upcharge (list) for Metallic trim color.
NADR-8
Class CA
UniGroup/PLACES Shelf
Dividers
3 13/16′′(97mm)
3 1/4′′(83mm)
12 1/4′′(311mm)
SD-12
Features
To Order, Specify:
• Includes eight shelf dividers.
• Formed lips attach to shelf.
• For use with PLACES and UniGroup low and regular shelves.
1) Product number.
$230
2) Trim color.
Available on RUSH.
SD-12
Class AA
UniGroup/PLACES Shelf Back
Guard
HBG
2 3/4′′(70mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HBG-0024
HBG-0030
HBG-0036
HBG-0042
HBG-0048
HBG-0054
HBG-0060
Features
To Order, Specify:
•
•
•
•
•
1) Product number.
Includes back guard and attachment hardware.
Provides protection of the panel fabric.
For use with PLACES and UniGroup low and regular shelves.
Shelf thickness is 3/4′′(19mm).
Field installed using existing screw locations on shelf.
$31
34
37
40
49
53
60
2) Trim color.
Class BA
Wall Track
60′′(1524mm)
72′′(1829mm)
84′′(2134mm)
3/4′′(19mm)
5/8′′(16mm)
Features
To Order, Specify:
• Includes two wall tracks and attachment screws
(#10 2 1/2′′ long).
• For attachment of components to structural walls.
• See installation instructions for proper mounting.
1) Product number.
Specification Tip
WT
WT-60
WT-72
WT-84
$101
123
137
2) Trim color for screws. $13 upcharge (list) for
Metallic trim color.
3) Trim color for track. $13 upcharge (list) for
Metallic trim color.
• Not for use with up-mount overhead storage unit.
Class CA
SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
273
UniGroup Too Price List
Adaptable Wall Mount Components
for use with UniGroup Too, UniGroup, PLACES
Wall Mounted Overhead
Storage Unit, Painted
or Wood Fronts
Height
Depth
Width
Painted
Number
16′′(406mm)
14′′(356mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
UUFS-1624-PW
UUFS-1630-PW
UUFS-1636-PW
UUFS-1642-PW
UUFS-1648-PW
UUFS-1654-PW
UUFS-1660-PW
UUFS-1666-PW
UUFS-1672-PW
$ 542
560
592
615
636
692
749
903
1058
Height
Depth
Width
Translucent Door
1 2
Number
White
Price
Patterned
Price
16′′(406mm)
14′′(356mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
UUFF-1624-QW
UUFF-1630-QW
UUFF-1636-QW
UUFF-1642-QW
UUFF-1648-QW
UUFF-1654-QW
UUFF-1660-QW
UUFF-1666-QW
UUFF-1672-QW
$ 621
644
687
708
729
798
871
1061
1256
$ 852
896
960
1002
1044
1124
1207
1408
1613
Height
Depth
Width
Wood
Number
Wood
Group I
Wood
Group II
16′′(406mm)
14′′(356mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
UUFS-1624-WW
UUFS-1630-WW
UUFS-1636-WW
UUFS-1642-WW
UUFS-1648-WW
UUFS-1654-WW
UUFS-1660-WW
UUFS-1666-WW
UUFS-1672-WW
$ 681
706
750
775
798
869
945
1137
1334
$ 705
731
776
802
826
901
979
1178
1383
UUFS-PW
UUFS-WW
Inside Dimensions
Height
12 3/4′′(324mm)
Depth
13 1/4′′(337mm)
April 2008 / USA
1 2
Painted
Price
Features
To Order, Specify:
• Includes top shelf, bottom shelf with back stop, end panels,
doors and wall attachment brackets.
• Locks are available black or chrome. Lock plug(s) and key(s)
are shipped with random numbering unless they are specified
��keyed-alike’’ or ��master-keyed’’.
• Inside dimensions:
• –Height: 12 3/4′′(324mm)
• –Depth: 12 1/4′′(311mm)
• Accepts separately specified task lights.
• Door stores on top of unit.
• 66′′(1676mm) and 72′′(1829mm) units have two doors with
one lock per door if locking option is specified.
• Optional non-structural back is available.
• Shipped unassembled.
1) Product number, including:
Available on RUSH.
274
1 2
1 Lock Options:
N Non-Locking
L
Locking, add $14 list.
2 Close Options:
S
Slow Close, add $252 list. 66′′ and 72′′
wide units, add $504 list.
No Specification required for regular
close.
2) Trim color for case.
3) Trim or wood finish color for front.
Specification Tips
4) Trim color for lock plug.
• Doors cannot be retrofitted with locks.
• Painted and translucent doors can be field retrofitted with
slow close mechanism from eParts. Wood door requires
purchase of new door with slow close mechanism from eParts.
• Must be properly anchored to a structural wall.
• Anchors are not provided, must be field supplied.
$57 upcharge (list) for Metallic trim color.
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
Adaptable Wall Mount Components
for use with UniGroup Too, UniGroup, PLACES
Outside
Height
Back for Wall Mounted
Overhead Storage Unit
16′′(406mm)
UUFB-P
Width
Number
Price
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
66′′(1676mm)
72′′(1829mm)
UUFB-0024-P
UUFB-0030-P
UUFB-0036-P
UUFB-0042-P
UUFB-0048-P
UUFB-0054-P
UUFB-0060-P
UUFB-0066-P
UUFB-0072-P
$ 66
71
77
82
87
92
97
102
107
Features
To Order, Specify:
• Includes one painted back and mounting hardware.
• Used to cover wall mount attachment brackets.
1) Product number.
Specification Tips
Note: $20 Upcharge (list) for Metallic trim color.
2) Trim color.
• For use on Wall Mount Overhead Storage Units only.
• Back must match width of Wall Mounted Overhead Storage
Units.
Tackboard Wall Mount
Nominal
Height
16′′(406mm)
KUAF
Width
Number
Fabric Grade
A
B
C
D
E
F
G
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
KUAF-1624
KUAF-1630
KUAF-1636
KUAF-1642
KUAF-1648
KUAF-1660
$171
173
182
193
200
228
$196
199
210
223
234
267
$204
209
220
234
244
279
$240
248
264
281
296
338
$257
265
282
301
317
363
$179
182
191
203
211
240
$187
190
200
213
221
253
Feature
To Order, Specify:
• Includes one tackboard and attachment hardware.
1) Product number.
Specification Tip
2) Fabric surface and color.
• Designed to be used under wall mounted overhead storage
units.
Worksurface/Worksurface
Support Panel to Wall Bracket
ZUBW-PN
Number
Price
ZUBW-0000-PN
$20
Features
To Order, Specify:
• Includes one bracket and worksurface or worksurface support
panel mounting screws.
• Screws/anchors for attachment to wall are field supplied.
• Worksurface to wall application
• –Partially supports the back of a worksurface in wall mount
application when a vertical wall track is not desired.
• Worksurface Support Panel to wall application
• –Attaches a worksurface support panel (ZZFS) to a building
wall in a wall mount application when a vertical wall track is
not desired.
• Standard in black finish only.
1) Product number.
(No finish specification required.)
Specification Tips
•
•
•
•
Must be properly anchored to a structural wall.
Worksurface front corners support requirements:
–One corner must be floor supported.
–Second corner must be either floor supported or attached to
an adjacent worksurface with a flush mount kit.
• –The distance between these floor supports may not exceed
10 feet.
Bracket Requirements
Length of a particular
worksurface adjacent to
the wall (inches)
Min # of
Brackets
Required
(qty)
12-47
2
48-83
3
84-120
4
Class CA – SIN 711-1; Discount Group VIII
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
275
UniGroup Too Price List
Task Lighting
for use with UniGroup Too, UniGroup, PLACES
Adaptable Electronic Ballast
Task Light
LUTS-16UEP
C
R
US
Height
Depth
Width
Number
Price
1.375′′(25mm)
4 1/4′′(105mm)
24′′(610mm)
30′′(762mm)
42′′(1067mm)
54′′(1372mm)
LUTS-0024-16UEP
LUTS-0030-16UEP
LUTS-0042-16UEP
LUTS-0054-16UEP
$162
169
185
198
Features
To Order, Specify:
• Includes mounting brackets, black power cord, prismatic lens,
low mercury content, and T-8 optic fluorescent lamp with
3500K color temperature.
• Six foot cord is factory installed on right side; may be
field-installed on the left-hand side 42′′(1067mm) and
54′′(1372mm) units.
• Nine foot cord is available as a specified option.
• Provides task lighting beneath shelves or overhead storage
units.
• Available in charcoal only.
• For use with 120 volt 60 hertz electrical systems only.
1) Product number.
(No finish specification required.)
Specification Tips
• A task light may be of equal or less width than the unit to
which it is attached but may not span across adjacent
units.
• Task lights may be adjusted front-to-back.
• If task light is less than the width of the unit to which it is
attached, it may also be adjusted side-to-side.
• Attaches to Adaptable, UniGroup, PLACES and OneTouch
overhead and shelves.
• Attaches to counter tops and must be specified one width
smaller than countertop width.
276
April 2008 / USA
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
Batwing Lens Specification:
To specify, replace P with B in the product number
and add $15 list.
Example: LUTS-0030-16UEB
Chicago Specification:
To specify, replace 1 with C in the product number
and add $71 list.
Example: LUTS-0030-C6UEP
Chicago only: Plug includes 3 AMP resetable
circuit breaker.
9′ Cord Option
To specify, replace 6 with 9 and add $31 list.
Example: LUTS-0030-19UEP
UniGroup Too Price List
Task Lighting
for use with UniGroup Too, UniGroup, PLACES
Adaptable Electronic Ballast
Task Light (Starter Light)
Height
Depth
Width
Description
Number
Price
1 3/8′′(35mm)
4 1/4′′(108mm)
42′′(1067mm)
6′ Cord - Prismatic Lens
9′ Cord - Prismatic Lens
6′ Cord - Prismatic Lens
9′ Cord - Prismatic Lens
LUTR-0042-16UEP
LUTR-0042-14UEP
LUTR-0054-16UEP
LUTR-0054-19UEP
$203
234
$218
249
54′′(1372mm)
LUTR
C
R
US
Features
To Order, Specify:
• Includes mounting brackets, .33′′(8mm) diameter black
3-prong power cord, prismatic or batwing lens, low mercury
content, and T-8 fluorescent lamp with 3500K color
temperature.
• Wired to accommodate the addition of add-on task light.
• Cord is factory installed on right side; may be field-installed
on the left-hand side.
• Provides task lighting beneath overhead storage units.
• For use with 120 volt 60 hertz electrical systems only.
1) Product number.
(No finish specification required.)
Batwing Lens Specification:
To specify, replace P with B in the product number
and add $15 list.
Example: LUTR-0042-16UEB
Specification Tips
• A task light may be of equal or less width than the unit to
which it is attached but may not span across adjacent
units.
• Task lights may be adjusted front-to-back on metal shelf
hanger bars.
• If task light is less than the width of the unit to which it is
attached, it may also be adjusted side-to-side.
• A maximum of 5 task lights may be daisy chained together
including the starter light and/or not to exceed 20′ of overall
task light run.
• Attaches to Adaptable, UniGroup, PLACES and OneTouch
overheads and shelves.
Adaptable Electronic Ballast
Task Light (Add-On Light)
1 3/8′′(35mm)
4 1/4′′(108mm)
42′′(1067mm)
54′′(1372mm)
LUTD
C
R
15′′ Linking Cord - Prismatic Lens
48′′ Linking Cord - Prismatic Lens
15′′ Linking Cord - Prismatic Lens
48′′ Linking Cord - Prismatic Lens
Features
To Order, Specify:
• Includes mounting brackets, linking power cord, prismatic or
batwing lens, low mercury content, and T-8 fluorescent lamp
with 3500k color temperature.
• Provides task lighting beneath overhead storage units.
• For use with 120 volt 60 hertz electrical systems only.
1) Product number.
(No finish specification required.)
US
Specification Tips
NOTE:
Must be attached to a starter
light or another add-on light.
LUTD-0042-11UEP
LUTD-0042-14UEP
LUTD-0054-11UEP
LUTD-0054-14UEP
• A task light may be of equal or less width than the unit to
which it is attached but may not span across adjacent
units.
• Task lights may be adjusted front-to-back on metal shelf
hanger bars.
• If task light is less than the width of the unit to which it is
attached, it may also be adjusted side-to-side.
• A maximum of 5 task lights may be daisy chained together
including the starter light and/or not to exceed 20′ of overall
task light run.
• Choose add-on light with appropriate linking cord length so as
not to have excess cord.
• Attaches to Adaptable, UniGroup, PLACES and OneTouch
overheads and shelves.
$203
214
$218
229
Batwing Lens Specification:
To specify, replace P with B in the product number
and add $15 list.
Example: LUTD-0042-11UEB
Starter Light
Add-On Lights
Linking
Cord
Class CA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
277
UniGroup Too Price List
Tack Strips/Tackboards
for use with UniGroup Too, UniGroup, PLACES
Tack Strip
Height
Thickness Width
Number
Fabric Grade
A
B
C
D
E
F
G
5′′(127mm)
1′′(25mm)
HTB-2405
HTB-3005
HTB-3605
HTB-4205
HTB-4805
HTB-5405
HTB-6005
$112
116
121
125
133
152
155
$141
145
150
154
162
178
184
$149
153
158
162
170
193
196
$154
158
163
167
175
194
197
$159
163
168
172
180
199
202
$164
168
173
177
185
204
207
$199
213
299
$204
218
302
$208
224
310
$214
235
324
$229
242
336
$257
270
366
$259
273
373
$204
226
321
$209
230
324
$213
236
332
$219
247
346
$234
254
358
$262
278
388
$264
281
395
HTB
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
$126
130
135
139
147
167
169
Features
To Order, Specify:
• Includes tack strip and attachment hardware.
• HTB tack strips can be applied to all panel surface types
except PLACES monolithic high performance panel.
• Tack strip to be installed on one or more panels of equivalent
widths when designated tack area is required or can be
mounted to wall track.
1) Product number.
2) Fabric surface and color.
Available on RUSH.
Tackboard
HTB
11′′(279mm) 1′′(25mm)
16′′(406mm)
33′′(838mm)
11′′(279mm)
16′′(406mm)
33′′(838mm)
11′′(279mm)
16′′(406mm)
33′′(838mm)
11′′(279mm)
16′′(406mm)
33′′(838mm)
11′′(279mm)
16′′(406mm)
33′′(838mm)
11′′(279mm)
16′′(406mm)
33′′(838mm)
11′′(279mm)
16′′(406mm)
33′′(838mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HTB-2411
HTB-2416
HTB-2433
HTB-3011
HTB-3016
HTB-3033
HTB-3611
HTB-3616
HTB-3633
HTB-4211
HTB-4216
HTB-4233
HTB-4811
HTB-4816
HTB-4833
HTB-5411
HTB-5416
HTB-5433
HTB-6011
HTB-6016
HTB-6033
$148
162
208
$152
166
211
$156
172
219
$162
183
233
$177
190
245
$201
214
275
$203
217
282
$162
176
222
$166
180
225
$170
186
233
$176
197
247
$191
204
259
$217
230
293
$219
233
300
April 2008 / USA
$189
203
255
$193
207
258
$197
213
266
$203
224
280
$218
231
292
$247
260
334
$249
263
341
Features
To Order, Specify:
• Includes tackboard and attachment hardware.
• HTB tackboards can be applied to all panel surface types
except PLACES monolithic high performance panel.
• Tackboard to be installed on one or more panels of
equivalent widths when designated tack area required or can
be mounted to wall track.
1) Product number.
Available on RUSH.
278
$179
193
242
$183
197
245
$187
203
253
$193
214
267
$208
221
279
$237
250
317
$239
253
324
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
$194
208
277
$199
213
280
$203
219
288
$209
230
302
$224
237
314
$252
265
344
$254
268
351
2) Fabric surface and color.
UniGroup Too Price List
Tack Strips/Tackboards
for use with PLACES Monolithic High Performance Acoustical Panels Only
Height
Thickness Width
Tack Strip — Monolithic High- 5′′(127mm) 1′′(25mm)
Performance Acoustical Panels
HTB-H
Tackboard — Monolithic HighPerformance Acoustical
Panels
HTB-H
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
Number
Fabric Grade
A
B
C
D
E
F
G
HTB-2405-H
HTB-3005-H
HTB-3605-H
HTB-4205-H
HTB-4805-H
HTB-5405-H
HTB-6005-H
$127
131
136
140
148
167
170
$156
160
165
169
177
193
199
$164
168
173
177
185
208
211
$169
173
178
182
190
209
212
$174
178
183
187
195
214
217
$179
183
188
192
200
219
222
$214
228
314
$219
233
317
$223
239
325
$229
250
339
$244
257
351
$272
285
381
$274
288
388
$219
241
336
$224
245
339
$228
251
347
$234
262
361
$249
269
373
$277
293
403
$279
296
410
$141
145
150
154
162
182
184
Features
To Order, Specify:
• Includes tack strip and attachment hardware to accommodate
monolithic high-performance acoustical panels.
• HTB-H tack strips are for use with high-performance
acoustical panels only.
1) Product number.
11′′(279mm) 1′′(25mm)
16′′(406mm)
33′′(838mm)
11′′(279mm)
16′′(406mm)
33′′(838mm)
11′′(279mm)
16′′(406mm)
33′′(838mm)
11′′(279mm)
16′′(406mm)
33′′(838mm)
11′′(279mm)
16′′(406mm)
33′′(838mm)
11′′(279mm)
16′′(406mm)
33′′(838mm)
11′′(279mm)
16′′(406mm)
33′′(838mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HTB-2411-H
HTB-2416-H
HTB-2433-H
HTB-3011-H
HTB-3016-H
HTB-3033-H
HTB-3611-H
HTB-3616-H
HTB-3633-H
HTB-4211-H
HTB-4216-H
HTB-4233-H
HTB-4811-H
HTB-4816-H
HTB-4833-H
HTB-5411-H
HTB-5416-H
HTB-5433-H
HTB-6011-H
HTB-6016-H
HTB-6033-H
$163
177
223
$167
181
226
$171
187
234
$177
198
248
$192
205
260
$216
229
290
$218
232
297
2) Fabric surface and color.
$177
191
237
$181
195
240
$185
201
248
$191
212
262
$206
219
274
$232
245
308
$234
248
315
$194
208
257
$198
212
260
$202
218
268
$208
229
282
$223
236
294
$252
265
332
$254
268
339
$204
218
270
$208
222
273
$212
228
281
$218
239
295
$233
246
307
$262
275
349
$264
278
356
Features
To Order, Specify:
• Includes tackboard and attachment hardware.
• HTB-H tackboards are for use with high-performance
acoustical panels only.
1) Product number.
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
$209
223
292
$214
228
295
$218
234
303
$224
245
317
$239
252
329
$267
280
359
$269
283
366
2) Fabric surface and color.
April 2008 / USA
279
UniGroup Too Price List
Markerboards/Wall Accessory Slat Pad
for use with UniGroup Too, UniGroup, PLACES
Markerboard — Non-Magnetic
Surface
MEAM
ClassCA
HNAM
Class BA
Height
Depth
Width
Number
Price
16′′(406mm)
3 1/4′′(83mm)
23 1/8′′(587mm)
3 1/4′′(83mm)
48 1/8′′(1222mm)
3 1/4′′(83mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
60′′(1524mm)
MEAM-3016
MEAM-3616
MEAM-4216
MEAM-4816
MEAM-6016
HNAM-3023
HNAM-3623
HNAM-4223
HNAM-4823
HNAM-6023
HNAM-6048
$250
263
280
296
313
$301
320
344
363
385
$526
Features
To Order, Specify:
• Includes markerboard, tray, four dry erase markers and one
eraser.
• White erasable writing surface with tray for storage of dry
erase markers and eraser.
• Non-magnetic.
• Tray is standard in charcoal and edge is standard in white
finish colors.
• Markerboard cleaner and conditioner, order ePart
#7031-7001.
• May be used on wall track.
1) Product number.
(No finish specification required.)
Available on RUSH.
Markerboard — Magnetic
Surface
HMB
Class BA
Wall Accessory Slat Pad
HGRY
28′′(711mm)
3 7/16′′(87mm)
52′′(1321mm)
3 7/16′′(87mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
Features
To Order, Specify:
• Includes markerboard, tray, four dry erase markers and one
eraser.
• White porcelain erasable writing surface with tray for storage
of dry erase markers and eraser.
• Shipped completely assembled.
• Magnetic.
• Markerboard cleaner and conditioner, order ePart
#7031-7001.
• May be used on wall track.
1) Product number.
2) Trim color.
Width
Number
Price
16′′(406mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HGRY-2416
HGRY-3016
HGRY-3616
HGRY-4216
HGRY-4816
HGRY-5416
HGRY-6016
$186
207
230
254
277
288
301
Features
To Order, Specify:
• Includes one pad, end caps and attachment brackets.
• Assembled slat pad thickness is 3/8′′(10mm).
1) Product number.
Specification Tips
• Attaches to a UniGroup Too, UniGroup or PLACES panel or a
combination of panels that equal the pad width.
• Designed to work with Jump Stuff slat pad tools.
• Can be mounted under a shelf or overhead storage unit.
• Intended to provide paper management capabilities.
• May be used on wall track.
April 2008 / USA
$520
543
584
608
649
671
$617
663
725
785
842
Height
Class BA
280
HMB-3028
HMB-3628
HMB-4228
HMB-4828
HMB-5428
HMB-6028
HMB-3652
HMB-4252
HMB-4852
HMB-5452
HMB-6052
SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Trim color. $24 upcharge (list) for Metallic trim
color.
UniGroup Too Price List
Jump Stuff Slat Pad Tools
for use with UniGroup Too, UniGroup, PLACES
Binder Bin
Height
Depth
Width
Number
Price
12 1/2′′(318mm)
10 1/2′′(267mm)
6 1/2′′(165mm)
DTSB-3
$39
Features
To Order, Specify:
• Mounts on slat pad. Can also be used in freestanding
applications.
• Bin accommodates two 3′′(76mm) thick binders.
1) Product number.
2) Translucent trim color.
DTSB-3
Tote
DTTE-3
Tack Strip
Height
Depth
Width
10′′(254mm)
4′′(102mm)
13′′(330mm)
Description
Tote
Tote, clips, and strap
Number
Price
DTTE-3
DTTH-3
$46
65
Features
To Order, Specify:
•
•
•
•
1) Product number.
Mounts on slat pad.
Clip and strap standard in black.
Fits in lateral files.
Accommodates hanging files.
2) Translucent trim color.
DTTH-3
Height
Depth
Width
Number
Price
2 1/2′′(64mm)
1/2′′(13mm)
12′′(305mm)
24′′(610mm)
DTTS-12
DTTS-24
$23
28
Features
To Order, Specify:
• Mounts on slat pad.
• Brown and black cork and rubber composite material.
1) Product number.
Features
To Order, Specify:
• Includes two flex arms, two base clips, assortment of three
tops (one grip clip, one round top, and one flower top) and
two stick-on clips.
• Mounts on slat pad to display miscellaneous notes/items or
anywhere with stick-on clips.
• Stick-on clips include double-sided tape.
1) Product number.
2) Trim color for bracket.
DTTS-12
DTTS-24
DTGK-3
Gooseneck Kit
$50
2) Translucent trim color.
DTGK-3
Mini Shelf
DMSP
1 3/4′′(44mm)
6 1/4′′(159mm)
18′′(457mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
DMSP-18
DMSP-24
DMSP-30
DMSP-36
DMSP-42
DMSP-48
Features
To Order, Specify:
•
•
•
•
1) Product number.
Includes shelf and brackets.
Mounts on slat pad.
Shelf thickness 3/4′′(19mm)
Designed for lightweight accessories.
Class YA – SIN 711-2; Discount Group XIII
Canadian Conversion Factor: Refer to haworth.com/Canada
$82
84
86
88
93
96
2) Vinyl shelf color.
3) Trim color for bracket.
April 2008 / USA
281
UniGroup Too Price List
Jump Stuff Slat Pad Tools
for use with UniGroup Too, UniGroup, PLACES
Phone Shelf
Height
Depth
Width
Number
Price
2 1/2′′(64mm)
11 1/4′′(286mm)
9′′(229mm)
DTPT-3
$53
Features
To Order, Specify:
• Includes phone shelf and bracket.
• Mounts on slat pad at 30° angle.
• Supports maximum of two reams (ten pounds/4.6 kilograms)
of paper.
1) Product number.
2) Translucent trim color.
3) Trim color for bracket.
DTPT-3
Phone Shelf Bracket
1 1/2′′(38mm)
11′′(279mm)
7 1/2′′(191mm)
DTBS-3
Feature
To Order, Specify:
• Used to convert DTPT-1 for mounting rail phone shelf to slat
pad.
1) Product number.
$39
2) Trim color for bracket.
DTBS-3
Personal Shelf
1 3/4′′(44mm)
11′′(279mm)
8′′(203mm)
DTES-3
Features
To Order, Specify:
•
•
•
•
1) Product number.
Includes mounting bracket and personal shelf.
Mounts on rail at 60В° angle or horizontally.
Can also be used as a horizontal freestanding tray.
Supports maximum of two reams (ten pounds/4.6 kilograms)
of paper.
$30
2) Translucent trim color.
3) Trim color for bracket.
DTES-3
DTAR-3
Personal Shelf Bracket
Feature
To Order, Specify:
• Used in combination with DTPR-3 or DTES-3 for mounting
rail personal shelf or paper sorter to slat pad.
1) Product number.
$18
2) Trim color for bracket.
DTAR-3
Paper Sorter
9 1/4′′(235mm)
11′′(279mm)
9′′-12′′(229mm-305mm)
Features
To Order, Specify:
•
•
•
•
1) Product number.
Includes three dividers, one shelf, and mounting bracket.
Mounts on slat pad.
Can also be used as a horizontal freestanding tray.
Supports maximum of two reams (ten pounds/4.6 kilograms)
of paper.
DTPR-3
282
April 2008 / USA
DTPR-3
Class YA – SIN 711-2; Discount Group XIII
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Translucent trim color.
3) Trim color for bracket.
$44
UniGroup Too Price List
Jump Stuff Rail and Slat Pad Tools
for use with UniGroup Too, UniGroup, PLACES
Tool Cup
Height
Depth
Width
Number
Price
5 1/2′′(140mm)
3 1/2′′(89mm)
4′′(102mm)
DTWC-2
$16
Feature
To Order, Specify:
• Mounts on rail and slat pad. Can also be used in freestanding
applications.
1) Product number.
2) Translucent trim color.
DTWC-2
Letter Tray
2 1/2′′(64mm)
12′′(305mm)
10 1/2′′(267mm)
DTLT-2
Features
To Order, Specify:
•
•
•
•
1) Product number.
Mounts on rail at 60В° angle or horizontally.
Mounts on slat pad horizontally.
Can also be used in freestanding applications.
Use Letter Tray Stacking Brackets (DTLS-2) to convert to
stacking letter trays.
• Supports maximum of one ream (five pounds/2.3 kilograms)
of paper.
$19
2) Translucent trim color.
DTLT-2
Class YA – SIN 711-2; Discount Group XIII
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
283
UniGroup Too Price List
Jump Stuff Work Style Kits — Slat Pad Mounted
for use with UniGroup Too, UniGroup, PLACES
File Master Kit
Mounting System
Slat Pad Width
Packaging
Number
Price
Slat Pad
Slat Pad
69′′(1753mm)
Pre-Packaged
Bulk-Packaged
DPKP-S
DBKP-S
$363
318
Features
To Order, Specify:
• Kit includes gooseneck kit, two paper sorters, two letter trays,
phone shelf, tote, tool cup, and binder bin.
• Mounts on separately specified slat pad.
• Ships either pre-packaged or bulk-packaged.
• Bulk-packaged offers reduced list price, and ships with each
set of parts packaged in separate cartons.
1) Product number.
3) Trim color for brackets.
Note: Minimum 10 kits required to order as bulk-packaged.
DPKP-S
DBKP-S
Task Master Kit
Slat Pad
Slat Pad
51′′(1295mm)
Pre-Packaged
Bulk-Packaged
To Order, Specify:
• Kit includes gooseneck kit, paper sorter, two letter trays,
phone shelf, tote, two grip clips, two pile dividers, and tool
cup.
• Mounts on separately specified slat pad.
• Ships either pre-packaged or bulk-packaged.
• Bulk-packaged offers reduced list price, and ships with each
set of parts packaged in separate cartons.
1) Product number.
Note: Minimum 10 kits required to order as bulk-packaged.
Mini Master Kit
Slat Pad
Slat Pad
DPKS-S
DBKS-S
49′′(1245mm)
Pre-Packaged
Bulk-Packaged
3) Trim color for brackets.
DPKS-S
DBKS-S
To Order, Specify:
• Kit includes gooseneck kit, paper sorter, two letter trays,
phone shelf, and tool cup.
• Mounts on separately specified slat pad.
• Ships either pre-packaged or bulk-packaged.
• Bulk-packaged offers reduced list price, and ships with each
set of parts packaged in separate cartons.
1) Product number.
Class YA – SIN 711-2; Discount Group XIII
Canadian Conversion Factor: Refer to haworth.com/Canada
$355
311
2) Translucent trim color.
Features
Note: Minimum 10 kits required to order as bulk-packaged.
April 2008 / USA
DPKT-S
DBKT-S
Features
DPKT-S
DBKT-S
284
2) Translucent trim color.
2) Translucent trim color.
3) Trim color for brackets.
$222
196
UniGroup Too Price List
Jump Stuff Freestanding Tools
for use with UniGroup Too, UniGroup, PLACES
Waste Bin
Height
Depth
Width
15 1/2′′(394mm)
12′′(305mm)
13′′(330mm)
Description
Number
Price
Black
DTRB-1B
DTRB-1
$37
49
Features
To Order, Specify:
• Used in freestanding applications.
• Five gallon capacity.
1) Product number.
2) Translucent trim color.
DTRB
Letter Tray Stacking Kit
Height
Depth
Width
8′′(203mm)
12′′(305mm)
10 1/2′′(267mm)
Number
Price
DTLS-2
$50
Features
To Order, Specify:
• Includes three letter trays and two stacking brackets.
• Used in freestanding applications.
1) Product number.
2) Translucent trim color.
DTLS-2
Letter Tray Stacking Bracket
2 1/4′′(57mm)
5′′(127mm)
9 1/2′′(241mm)
DTSB-1
Features
To Order, Specify:
• Includes two stacking brackets.
• Used in freestanding applications.
1) Product number.
$13
2) Translucent trim color.
DTSB-1
DTHT-1
Tote Strap
$21
Features
To Order, Specify:
•
•
•
•
1) Product number.
(No finish specification required.)
Includes strap and two clips.
Strap is 27′′(686mm) long and non-adjustable.
Converts DTTE-3 to DTTH-3.
Standard in black.
DTHT-1
Class YA – SIN 711-2; Discount Group XIII
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
285
UniGroup Too Price List
Jump Stuff Rail Mounting Systems
for use with UniGroup Too, UniGroup, PLACES
Panel Mount Rail
Height
Depth
Width
Description
Number
Price
4 1/2′′(114mm)
7′′(178mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
Two Supports
DSR-24-H
DSR-30-H
DSR-36-H
DSR-42-H
DSR-48-H
DSR-60-H
$69
72
82
86
88
97
DSR-H
Features
To Order, Specify:
• Includes two supports, one rail with two end caps.
• Mounts to Enhanced PREMISE, PLACES and UniGroup
panel side rails to support rail tools.
• Rail tools ordered separately.
• Rail is standard in brushed aluminum.
1) Product number.
2) Metallic trim color for rail supports only.
Specification Tips
• Supports maximum load of 50 pounds (23kg), evenly
distributed.
• Can be mounted on Haworth wall track.
• Can span one or more panels equivalent to rail width.
• Mounts approximately 18′′(457mm) below overhead storage
units and 7′′(178mm) above worksurfaces.
• Rail should not be mounted directly in front of tackboards.
Note: No more than 12′′(305mm) of rail can be extended
beyond outside of support.
Worksurface Mount Rail
DSR-W
7′′(178mm)
7′′(178mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
One Support
Two Supports
Features
To Order, Specify:
• Includes support(s) with mounting clamp(s) and one rail with
two end caps.
• Mounts to worksurface to support rail tools.
• Mounts on worksurfaces from 3/4′′(19mm) to 1 3/4′′(44mm)
thick. With minimum of 1/4′′(6mm) of clearance depth does
not require worksurface removal.
• Rail tools ordered separately.
• Rail is standard in brushed aluminum.
1) Product number.
Specification Tips
• Single support holds up to a maximum of 25 pounds (11kg),
evenly distributed. Double support holds up to a maximum of
50 pounds (23kg), evenly distributed.
• Can be installed off modular.
• Rail should not be mounted directly in front of tackboards.
• Under worksurface 4′′(102mm) of clearance is necessary
between back of worksurface and pedestal for clamp.
Note: No more than 12′′(305mm) of rail can be extended
beyond outside of support.
286
April 2008 / USA
DSR-24-W
DSR-30-W
DSR-36-W
DSR-42-W
DSR-48-W
DSR-60-W
Class YA – SIN 711-2; Discount Group XIII
Canadian Conversion Factor: Refer to haworth.com/Canada
$130
133
$143
147
149
158
2) Metallic trim color for rail supports only.
UniGroup Too Price List
Jump Stuff Rail Mounting Systems
for use with UniGroup Too, UniGroup, PLACES
Wall Mount Rail
Height
Depth
Width
Description
Number
Price
4 1/2′′(114mm)
7′′(178mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
Two Supports
DSR-24-L
DSR-30-L
DSR-36-L
DSR-42-L
DSR-48-L
DSR-60-L
$ 87
90
100
104
106
115
DSR-L
Features
To Order, Specify:
•
•
•
•
•
1) Product number.
Includes two supports, one rail with two end caps.
Mounts to wall to support rail tools.
Must be mounted on wall at stud locations.
Rail tools ordered separately.
Supports maximum load of 50 pounds (23kg), evenly
distributed.
• Rail is standard in brushed aluminum.
2) Metallic trim color for rail supports only.
Note: No more than 12′′(305mm) of rail can be extended
beyond outside of support.
Freestanding Mount Rail
DSR-F
7′′(178mm)
9′′(229mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
Two Supports
DSR-24-F
DSR-30-F
DSR-36-F
DSR-42-F
DSR-48-F
DSR-60-F
Features
To Order, Specify:
• Includes two supports with feet, one rail with two end caps.
• Freestanding mount rail supports rail tools on most flat
surfaces.
• Rail tools ordered separately.
• Supports maximum load of 50 pounds (23kg), evenly
distributed.
• Rail is standard in brushed aluminum.
1) Product number.
$161
164
174
178
180
189
2) Metallic trim color for rail supports only.
Note: No more than 12′′(305mm) of rail can be extended
beyond outside of support.
Class YA – SIN 711-2; Discount Group XIII
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
287
UniGroup Too Price List
Jump Stuff Rail Tools
for use with UniGroup Too, UniGroup, PLACES
Phone Shelf
DTPT-1
Height
Depth
Width
Number
Price
3′′(76mm)
11′′(279mm)
9′′(229mm)
DTPT-1
$53
Features
To Order, Specify:
• Mounts on rail at 30° angle.
• Supports maximum of two reams (ten pounds/4.6 kilograms)
of paper.
1) Product number.
11′′(279mm)
Personal Shelf
DTES-1
Paper Sorter
2) Translucent trim color.
8′′(203mm)
DTES-1
Features
To Order, Specify:
• Mounts on rail at 60° angle or horizontally.
• Can also be used as a horizontal freestanding tray.
• Supports maximum of two reams (ten pounds/4.6 kilograms)
of paper.
1) Product number.
9′′(229mm)
11′′(279mm)
2) Translucent trim color.
9′′-12′′(229mm-305mm)
DTPR-1
Features
To Order, Specify:
•
•
•
•
1) Product number.
Includes three dividers and one shelf.
Mounts horizontally on rail.
Can also be used as a horizontal freestanding tray.
Supports maximum of two reams (ten pounds/4.6 kilograms)
of paper.
$30
$44
2) Translucent trim color.
DTPR-1
Pile Master Kit
Packaging
Number
Price
Pre-Packaged
DPKY-1
$223
Features
To Order, Specify:
• Kit includes ten pile dividers.
• Requires no mounting rail.
1) Product number.
DPKY-1
288
April 2008 / USA
Class YA – SIN 711-2; Discount Group XIII
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Translucent trim color.
UniGroup Too Price List
Jump Stuff Rail Work Style Kits
for use with UniGroup Too, UniGroup, PLACES
Team Master Kit
DPKC-48
DBKC-48
File Master Kit
DPKP-48
DBKP-48
Mounting System
Packaging
Number
Price
Panel Mount*
Worksurface Mount
Wall Mount
Freestanding Mount
Panel Mount*
Worksurface Mount
Wall Mount
Freestanding Mount
Pre-Packaged
DPKC-48-H
DPKC-48-W
DPKC-48-L
DPKC-48-F
DBKC-48-H
DBKC-48-W
DBKC-48-L
DBKC-48-F
$533
679
554
641
$452
574
473
544
Bulk-Packaged
Feature
To Order, Specify:
• Kit includes gooseneck kit, paper sorter, file frame, two pile
dividers, disk box, phone caddy, sketch pad kit, 2-way
display, catch-all tray, wire wraps, and one 48′′(1219mm)
wide rail mount with appropriate supports.
1) Product number.
Panel Mount*
Worksurface Mount
Wall Mount
Freestanding Mount
Panel Mount*
Worksurface Mount
Wall Mount
Freestanding Mount
Pre-Packaged
Bulk-Packaged
2) Translucent trim color.
3) Metallic trim color for rail supports only.
DPKP-48-H
DPKP-48-W
DPKP-48-L
DPKP-48-F
DBKP-48-H
DBKP-48-W
DBKP-48-L
DBKP-48-F
Feature
To Order, Specify:
• Kit includes 2-way tray, two paper sorters, phone caddy,
gooseneck kit, sketch pad kit, file frame, catch-all tray, and
one 48′′(1219mm) wide mounting rail with appropriate
supports.
1) Product number.
$450
596
471
558
$391
513
412
499
2) Translucent trim color.
3) Metallic trim color for rail supports only.
Available on RUSH.
Task Master Kit
DPKT-48
DBKT-48
Panel Mount*
Worksurface Mount
Wall Mount
Freestanding Mount
Panel Mount*
Worksurface Mount
Wall Mount
Freestanding Mount
Pre-Packaged
Bulk-Packaged
DPKT-48-H
DPKT-48-W
DPKT-48-L
DPKT-48-F
DBKT-48-H
DBKT-48-W
DBKT-48-L
DBKT-48-F
Feature
To Order, Specify:
• Kit includes gooseneck kit, two grip clips, paper sorter, file
frame, two pile dividers, disk box, catch-all tray, 3-layer tray,
sketch pad kit, phone caddy, wire wraps, and one
48′′(1219mm) wide mounting rail with appropriate supports.
1) Product number.
$520
675
541
628
$463
586
484
571
2) Translucent trim color.
3) Metallic trim color for rail supports only.
Available on RUSH.
Common Features
• Ships either pre-packaged or bulk-packaged.
• Pre-packaged ships in two cartons, one for rail system and one for
tools.
• Bulk-packaged offers reduced list price, and ships with each set of
parts packaged in separate cartons.
Note: Minimum 10 kits required to order as bulk-packaged.
Class YA – SIN 711-2; Discount Group XIII
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
289
UniGroup Too Price List
Jump Stuff Rail Work Style Kits
for use with UniGroup Too, UniGroup, PLACES
Mini Master Kit
DPKS
DBKS
Mounting System
Rail Width
Packaging
Number
Price
Panel Mount
Worksurface Mount
Wall Mount
Freestanding Mount
Panel Mount
Worksurface Mount
Wall Mount
Freestanding Mount
Panel Mount
Worksurface Mount
Wall Mount
Freestanding Mount
Panel Mount
Worksurface Mount
Wall Mount
Freestanding Mount
36′′(914mm)
Pre-Packaged
36′′(914mm)
Bulk-Packaged
48′′(1219mm)
Pre-Packaged
48′′(1219mm)
Bulk-Packaged
DPKS-36-H
DPKS-36-W
DPKS-36-L
DPKS-36-F
DBKS-36-H
DBKS-36-W
DBKS-36-L
DBKS-36-F
DPKS-48-H
DPKS-48-W
DPKS-48-L
DPKS-48-F
DBKS-48-H
DBKS-48-W
DBKS-48-L
DBKS-48-F
$321
458
339
423
$285
405
302
376
$321
463
342
429
$291
413
312
399
Feature
To Order, Specify:
• Kit includes paper sorter, catch-all tray, 2-way tray,
gooseneck kit, phone caddy and one 36′′(914mm) or
48′′(1219mm) wide mounting rail with appropriate supports.
1) Product number.
Available on RUSH.
Common Features
• Ships either pre-packaged or bulk-packaged.
• Pre-packaged ships in two cartons, one for rail system and one for
tools.
• Bulk-packaged offers reduced list price, and ships with each set of
parts packaged in separate cartons.
Note: Minimum 10 kits required to order as bulk-packaged.
290
April 2008 / USA
Class YA – SIN 711-2; Discount Group XIII
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Translucent trim color.
3) Metallic trim color for rail supports only.
UniGroup Too Price List
Wire Grid System and Accessories
for use with UniGroup Too, UniGroup, PLACES
Grid
Height
Depth
Width
Number
Price
12′′(305mm)
1 1/4′′(32mm)
16′′(406mm)
1 1/4′′(32mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
54′′(1372mm)
60′′(1524mm)
HGR-2412
HGR-3012
HGR-3612
HGR-4212
HGR-4812
HGR-5412
HGR-6012
HGR-2416
HGR-3016
HGR-3616
HGR-4216
HGR-4816
HGR-5416
HGR-6016
$112
121
129
136
143
153
162
$121
129
136
143
151
159
172
HGR
Mailbox
Features
To Order, Specify:
• Grid attaches to panel side rails of corresponding widths or
wall track.
• Grid holds optional accessories.
• 12′′(305mm)-high grid is for under counter applications when
mounted on a minimum 44′′(1116mm)-high panel. Has 5
horizontal rails.
• 16′′(406mm)-high grid is for placement under shelf or
overhead storage unit above worksurface. Has six horizontal
wires.
• Vertical brackets at each end of grid provide wire channels for
management of task light power cord from fixture to
worksurface.
• Can span two panels.
1) Product number.
12 1/2′′(318mm)
10 3/4′′(273mm)
Grid mount
2) Trim color.
HGMB-0002
Features
To Order, Specify:
•
•
•
•
•
1) Product number.
Includes two trays and required hardware.
For grid mount applications.
Spacing between shelves is 3′′(76mm).
Field assembly of grid support hardware required.
Not applicable for mounting on 24′′(610mm)-wide grid.
$111
2) Trim color.
HGMB-0002
Reference Tray
10 3/4′′(273mm)
13′′(330mm)
Grid mount
HGRT-0001
Features
To Order, Specify:
•
•
•
•
1) Product number.
Includes one tray.
For grid mount applications.
Requires field assembly.
Holds 5 lbs (2.3kg) maximum weight.
$108
2) Trim color.
HGRT-0001
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
291
UniGroup Too Price List
Wire Grid System and Accessories
for use with UniGroup Too, UniGroup, PLACES
Diskette Bin
Height
Depth
Width
Number
Price
3 1/2′′(89mm)
2 1/2′′(64mm)
6′′(152mm)
HGDB-0004
$126
Features
To Order, Specify:
• Includes four diskette bins.
• Grid mount or freestanding.
• For storing CD’s in jewel cases.
1) Product number.
2) Trim color.
HGDB-0004
Multi-Purpose Storage Bins
3 1/2′′(89mm)
3′′(76mm)
4′′(102mm)
8′′(203mm)
HGBN-0004
HGBN-0008
Features
To Order, Specify:
• Includes four storage bins of one size.
• Hang from horizontal grid rails.
1) Product number.
$119
151
2) Trim color.
HGBN
Grid Tackstrip
3 1/2′′(89mm)
1/4′′(6mm)
24′′(610mm)
30′′(762mm)
Features
To Order, Specify:
•
•
•
•
1) Product number.
Includes four tackstrips.
For grid mount applications.
Mounts between two horizontal grid rails.
Cork is standard natural color only.
HGTS
292
April 2008 / USA
HGTS-0024
HGTS-0030
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Bracket trim color.
$273
343
UniGroup Too Price List
Task Organization
for use with UniGroup Too, UniGroup, PLACES
Paper Management Mounting
Bar
PMMB
Height
Depth
Width
2′′(51mm)
1′′(25mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
Description
Number
Price
PMMB-24
PMMB-30
PMMB-36
PMMB-42
PMMB-48
PMMB-60
$101
109
112
128
135
146
Features
To Order, Specify:
• Supports all types of panel-mounted paper management
components of equivalent multiple widths.
• Mounting bars on adjacent panels may be spanned by paper
management accessories.
• To be installed on one or more panels of equivalent bar width.
1) Product number.
2) Trim color.
Available on RUSH.
Diagonal Unit — Suspended
6 1/4′′(159mm)
11 1/2′′(292mm)
11 1/2′′(292mm)
6′′(152mm)
12′′(305mm)
Two dividers
Four dividers
PMDU-6
PMDU-12
Features
To Order, Specify:
• Units designed to be hung on a mounting bar singly or in
multiple quantities and may span two adjacent mounting bars.
• Includes two or four dividers per unit as specified.
• Field-adjusted for left- or right-hand orientation.
• Includes frame, dividers and label holders.
1) Product number.
$ 68
134
2) Trim color.
Available on RUSH.
PMDU
Diagonal Unit — Freestanding
6 1/4′′(159mm)
10 1/4′′(260mm)
10 1/4′′(260mm)
6′′(152mm)
12′′(305mm)
Two dividers
Four dividers
PMDF-6
PMDF-12
Features
To Order, Specify:
• Unit may be used on any flat surface and for added security
may store within an overhead storage unit.
• Includes two or four dividers per unit as specified.
• Field-adjusted for left- or right-hand orientation.
• Includes frame, dividers and label holders.
1) Product number.
$ 68
134
2) Trim color.
PMDF
Horizontal Unit — Suspended
PMHU
6 1/4′′(159mm)
12 3/4′′(324mm)
12′′(305mm)
11′′(279mm)
13′′(330mm)
Front-to-back
Side-to-side
PMHU-11
PMHU-13
Features
To Order, Specify:
• Unit designed to be hung from a mounting bar singly or in
multiple quantities and may span mounting bars on adjacent
panels.
• Specify unit PMHU-11 for front-to-back paper storage or
PMHU-13 for side-to-side paper storage.
• Includes frame, two trays and label holders.
• Unit has total capacity of six trays (see tray packages
PMTP-11 or PMTP-13 on page 294).
1) Product number.
$121
136
2) Trim color.
Available on RUSH.
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
293
UniGroup Too Price List
Task Organization
for use with UniGroup Too, UniGroup, PLACES
Height
Horizontal Unit — Freestanding 6 1/4′′(159mm)
PMHF
Vertical Unit — Suspended
Depth
Width
Description
Number
Price
11 1/2′′(292mm)
10 3/4′′(273mm)
11′′(279mm)
13′′(330mm)
Front-to-back
Side-to-side
PMHF-11
PMHF-13
$113
128
Features
To Order, Specify:
• Units may be used on any flat surface and for added security
may store within an overhead storage unit.
• Units may be stacked vertically.
• Specify unit PMHU-11 for front-to-back paper storage or
PMHU-13 for side-to-side paper storage.
• Includes frame, two trays and label holders.
• Unit has total capacity of six trays (see tray packages
PMTP-11 or PMTP-13 below).
1) Product number.
6 1/4′′(159mm)
12′′(305mm)
2) Trim color.
6′′(152mm)
PMVU-6
Features
To Order, Specify:
• Unit designed to be hung from a mounting bar singly or in
multiple quantities and may span mounting bars on adjacent
panels.
• Includes frame and one tray.
• Unit is designed to hold binders in an upright position.
• To create small forms bins, specify 6′′(152mm) -wide tray
package (PMTP-6).
1) Product number.
$70
2) Trim color.
PMVU-6
Vertical Unit — Freestanding
6 1/4′′(159mm)
10 3/4′′(273mm)
6′′(152mm)
PMVF-6
Features
To Order, Specify:
• Units may be used on any flat surface and for added security
may store within an overhead storage unit.
• Includes frame and one tray.
• Unit is designed to hold binders in an upright position.
• To create small forms bins, specify 6′′(152mm) -wide tray
package (PMTP-6).
1) Product number.
$70
2) Trim color.
PMVF-6
Paper Management Tray
Packages
PMTP-6
10 1/2′′(267mm)
5 1/2′′(140mm)
12 1/2′′(318mm)
10 1/2′′(267mm)
10 1/2′′(267mm)
12 1/2′′(318mm)
Vertical unit trays,
set of five
Front-to-back
horizontal unit trays,
set of four
Side-to-side
horizontal unit trays,
set of four
PMTP-11
88
PMTP-13
88
To Order, Specify:
• Trays fit horizontal or vertical paper managers to increase
numbers of storage slots.
• Fits freestanding and suspended units.
1) Product number.
PMTP-13
April 2008 / USA
$83
Features
PMTP-11
294
PMTP-6
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Trim color.
UniGroup Too Price List
Lighting – BRAZO™
for use with UniGroup Too, UniGroup, PLACES
BRAZOв„ў
LBJ1
C
R
US
Class YA
Adaptable Electronic Ballast
Task Light
LUTS-16UEP
C
R
US
Class CA
Base Diameter
Number
Price
8 1/2′′(216mm)
LBJ1-0026-16FLC
$657
Features
To Order, Specify:
• Includes base, adjustable height fixture, arm with LED lamp
with clear lens, six foot removable silvertone cord.
• Features a LED light source with full dim control knob and 90
degree disbursement adjustment.
• 1.5 to 9 watts.
• Arm rotates 360 degrees.
• Adjustable height fixture range is 14′′-22′′(356mm-559mm)
from desktop.
• Arm is 26 1/2′′(673mm).
• Standard in brushed aluminum.
• Base includes scratch-resistant bottom cover with side cord
location.
• For use with 120 volt 60 hertz electrical system.
• Can be used on any horizontal surface.
• Minor assembly required.
• Overall height range with arm extended at 180° is
33 3/4′′-41′′(857mm-1041mm).
• Full dim control knob is located at end of arm.
1) Product number.
(No finish specification required.)
Height
Depth
Width
Number
Price
1.375′′(25mm)
4 1/4′′(105mm)
24′′(610mm)
30′′(762mm)
42′′(1067mm)
54′′(1372mm)
LUTS-0024-16UEP
LUTS-0030-16UEP
LUTS-0042-16UEP
LUTS-0054-16UEP
$162
169
185
198
Features
To Order, Specify:
• Includes mounting brackets, black power cord, prismatic lens,
low mercury content, and T-8 optic fluorescent lamp with
3500K color temperature.
• Six foot cord is factory installed on right side; may be
field-installed on the left-hand side 42′′(1067mm) and
54′′(1372mm) units.
• Nine foot cord is available as a specified option.
• Provides task lighting beneath shelves or overhead storage
units.
• Available in charcoal only.
• For use with 120 volt 60 hertz electrical systems only.
1) Product number.
(No finish specification required.)
Specification Tips
• A task light may be of equal or less width than the unit to
which it is attached but may not span across adjacent
units.
• Task lights may be adjusted front-to-back.
• If task light is less than the width of the unit to which it is
attached, it may also be adjusted side-to-side.
• Attaches to Adaptable, UniGroup, PLACES and OneTouch
overhead and shelves.
• Attaches to counter tops and must be specified one width
smaller than countertop width.
SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
Batwing Lens Specification:
To specify, replace P with B in the product number
and add $15 list.
Example: LUTS-0030-16UEB
Chicago Specification:
To specify, replace 1 with C in the product number
and add $71 list.
Example: LUTS-0030-C6UEP
Chicago only: Plug includes 3 AMP resetable
circuit breaker.
9′ Cord Option
To specify, replace 6 with 9 and add $31 list.
Example: LUTS-0030-19UEP
April 2008 / USA
295
UniGroup Too Price List
Lighting — Jump Stuff
for use with UniGroup Too, UniGroup, PLACES
Wing Light —
Freestanding
DLWL-F
C
R
US
Base Diameter
Description
Number
Price
7 1/2′′(191mm)
Magnetic Light
Electronic Light
DLWL-M-F
DLWL-E-F
$416
458
Features
To Order, Specify:
• Includes 3500K, 13W low mercury content compact
fluorescent lamp, mini rocker switch located under head,
base, two-piece hinged arms and 6′(1829mm) cord with two
prong plug.
• For freestanding applications.
• Head adjusts 4′′(102mm) to 18′′(457mm) above base and
6′′(152mm) to 17′′(432mm) in front of base.
• Lamp head is white, arms are silver, fixture base, joints and
cord are black.
• In-line magnetic ballast, electronic ballast located in fixture head.
• Arm pivots and head rotates 180° horizontally.
• Asymmetric light distribution to reduce glare.
• For use with 120 volt 60 hertz electrical systems.
1) Product number.
(No finish specification required.)
Magnetic Light
Electronic Light
Wing Light —
Rail Mount
DLWL-R
C
R
US
Features
To Order, Specify:
• Includes 3500K, 13W low mercury content compact
fluorescent lamp, mini rocker switch located under head,
two-piece hinged arms and 6′(1829mm) cord with two prong
plug.
• Mounts to Jump Stuff work rail.
• Head adjusts 4′′(102mm) to 18′′(457mm) above rail and
6′′(152mm) to 17′′(432mm) in front of rail.
• Lamp head is white, arms are silver, joints and cord are black.
• In-line magnetic ballast, electronic ballast located in fixture head.
• Arm pivots and head rotates 180° horizontally.
• Asymmetric light distribution to reduce glare.
• For use with 120 volt 60 hertz electrical systems.
1) Product number.
(No finish specification required.)
Magnetic Light
Electronic Light
Wing Light —
Under Shelf Mount
DLWL-U
C
R
US
C
R
296
US
April 2008 / USA
DLWL-M-U
DLWL-E-U
Features
To Order, Specify:
• Includes 3500K, 13W low mercury content compact
fluorescent lamp, mini rocker switch located under head,
attachment hardware with single hinged arm, and
6′(1829mm) cord with two prong plug.
• Mounts underneath Adaptable, PLACES, UniGroup,
UniGroup Too, OneTouch and RACE overhead storage units
and shelves.
• Head adjusts up to 8′′(203mm) below shelf and up to
11′′(279mm) in front of shelf.
• Lamp head is white, arms are silver, joints and cord are black.
• In-line magnetic ballast, electronic ballast located in fixture head.
• Arm pivots and head rotates 180° horizontally.
• Asymmetric light distribution to reduce glare.
• For use with 120 volt 60 hertz electrical systems.
1) Product number.
(No finish specification required.)
Magnetic Light
Electronic Light
Wing Light —
Panel Mount
DLWL-H
DLWL-M-R
DLWL-E-R
DLWL-M-H
DLWL-E-H
Features
To Order, Specify:
• Includes 3500K, 13W low mercury content compact
fluorescent lamp, mini rocker switch located under head,
two-piece hinged arms and 6′(1829mm) cord with two prong
plug.
• Mounts to Enhanced PREMISE, PLACES, UniGroup, and
UniGroup Too panel side rails.
• Head adjusts 4′′(102mm) to 18′′(457mm) above base and
6′′(152mm) to 17′′(432mm) in front of base.
• Lamp head is white, arms are silver, joints and cord are black.
• In-line magnetic ballast, electronic ballast located in fixture head.
• Arm pivots and head rotates 180° horizontally.
• Asymmetric light distribution to reduce glare.
• For use with 120 volt 60 hertz electrical systems.
1) Product number.
(No finish specification required.)
Class YA – SIN 711-2; Discount Group XIII
Canadian Conversion Factor: Refer to haworth.com/Canada
$384
426
$384
426
$384
426
UniGroup Too Price List
Pivot-Head Task Lighting
for use with UniGroup Too, UniGroup, PLACES
Freestanding
HTL-0001-F
C
R
US
Height
Depth
Number
Price
17 1/2′′(444mm)
24′′(610mm)
HTL-0001-F
$302
Features
To Order, Specify:
• Base measures 8′′(203mm) in diameter.
• Fits space between 29′′(737mm)-high worksurface and
overhead storage unit or shelf hung 18′′(457mm) above
worksurface.
• Powered by a 72′′(1829mm) black cord.
• Twin tube low mercury content 13-watt fluorescent lamp
included.
• Color temperature: 3500°K.
• Fixture arm, base, and base cap are standard in charcoal
color only.
• Amp draw: .3 (18 watts, including ballast).
• All models except freestanding pivot 180° at mounting
bracket.
• Pivoting head (350°).
• Switch located under light reflector head.
• Not for use with power sources other than 120 volt 60
hertz.
• For use in the U.S.A. only.
1) Product number.
20′′(508mm)
Panel-Hung
HTL-0001-P
C
R
US
C
R
US
HTL-0001-P
Features
To Order, Specify:
• Bracket hangs from slots in panel side rail.
• Bracket may be placed in left or right panel side rail.
• Fits space between 29′′(737mm)-high worksurface and
overhead storage unit or shelf hung 18′′(457mm) above
worksurface.
• Powered by a 72′′(1829mm) black cord.
• Twin tube low mercury content 13-watt fluorescent lamp
included.
• Color temperature: 3500°K.
• Fixture arm and mounting hardware are standard in charcoal
color only.
• Amp draw: .3 (18 watts, including ballast).
• All models except freestanding pivot 180° at mounting
bracket.
• Pivoting head (350°).
• Switch located under light reflector head.
• Panel and grid field-mounting options may be changed by
specifying additional mounting brackets separately, see page
298.
• Not for use with power sources other than 120 volt 60
hertz.
• For use in the U.S.A. only.
1) Product number.
20′′(508mm)
Grid-Mounted
HTL-0001-G
2) Lamp head trim color.
TR-F
Black
TR-W White
TR-E
Smoke
TR-1A Red
2) Lamp head trim color.
TR-F
Black
TR-W White
TR-E
Smoke
TR-1A Red
HTL-0001-G
Features
To Order, Specify:
• Mounts on 16′′(406mm)-high grid, anywhere along length.
• Fits space between 29′′(737mm)-high worksurface and
overhead storage unit or shelf hung 18′′(457mm) above
worksurface.
• Powered by a 72′′(1829mm) black cord.
• Twin tube low mercury content 13-watt fluorescent lamp
included.
• Color temperature: 3500°K.
• Fixture arm and mounting hardware are standard in charcoal
color only.
• Amp draw: .3 (18 watts, including ballast).
• All models except freestanding pivot 180° at mounting
bracket.
• Pivoting head (350°).
• Switch located under light reflector head.
• Panel and grid field-mounting options may be changed by
specifying additional mounting brackets separately, see page
298.
• Not for use with power sources other than 120 volt 60
hertz.
• For use in the U.S.A. only.
1) Product number.
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
$256
$275
2) Lamp head trim color.
TR-F
Black
TR-W White
TR-E
Smoke
TR-1A Red
April 2008 / USA
297
UniGroup Too Price List
Pivot-Head Task Lighting
for use with UniGroup Too, UniGroup, PLACES
Panel-Hung Bracket
Number
Price
HTLB-0001-P
$24
Features
To Order, Specify:
• Allows grid-mounted task lights to be converted to
panel-hung.
• Price includes two brackets.
• Standard in charcoal finish color only.
1) Product number.
(No finish specification required.)
HTLB-0001-P
Grid-Mount Bracket
HTLB-0001-G
$24
Features
To Order, Specify:
• Allows panel-mounted task lights to be converted to
grid-mounted.
• Price includes two brackets.
• Standard in charcoal finish color only.
1) Product number.
(No finish specification required.)
HTLB-0001-G
298
April 2008 / USA
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
X Series Attached Pedestals
for use with UniGroup Too, UniGroup, PLACES
Box/Box/File — Attached
Actual
Height
Actual
Depth
Actual
Width
27 1/2′′
(699mm)
17′′
(432mm)
15′′
(381mm)
27 1/2′′
(699mm)
27 1/2′′
(699mm)
JPAH-24
23′′
(584mm)
29′′
(737mm)
15′′
(381mm)
15′′
(381mm)
Description
Pull
Number 1 2
(S)
Painted
Price
Box/Box/File
1
JPAH-18-
1
$475
$493
$741
$764
JPAH-18JPAH-18JPAH-24-
1
543
559
$503
561
Box/Box/File
2, 3
7, 8, 9
1
809
825
$768
832
848
$792
Box/Box/File
2, 3
7, 8, 9
1
JPAH-24JPAH-24JPAH-30-
1
571
587
$554
836
852
$817
860
876
$843
File/File
2, 3
7, 8, 9
1
JPAH-30JPAH-30JPAJ-18-
1
622
638
$448
885
901
$697
911
927
$719
File/File
2, 3
7, 8, 9
1
JPAJ-18JPAJ-18JPAJ-24-
1
491
503
$472
740
752
$720
762
774
$743
File/File
2, 3
7, 8, 9
1
JPAJ-24JPAJ-24JPAJ-30-
1
515
527
$518
763
775
$765
786
798
$789
2, 3
7, 8, 9
JPAJ-30JPAJ-30-
808
820
832
844
File/File — Attached
27 1/2′′
(699mm)
27 1/2′′
(699mm)
17′′
(432mm)
23′′
(584mm)
15′′
(381mm)
15′′
(381mm)
JPAJ-24
2
Pull Styles
Ellipse
Radius
Taper
Crescent
Linear
Classic
27 1/2′′
(699mm)
29′′
(737mm)
15′′
(381mm)
Features
561
573
(K-N-Q)
(W)
(W)
Painted
Wood Wood
Perf. Price Price I Price II
$521
589
$572
640
$481
524
$505
548
$551
594
To Order, Specify:
• Includes attachment hardware, one black pencil tray.
• Box drawers include one divider; file drawers include one
compressor.
• Standard with lock; keyed alike and master keying options
available.
• Drawers interiors and accessories are black.
• Attached units must be attached under a worksurface
equal to or deeper than pedestal depth.
• Optional drawer fronts include painted, painted perforated or
wood.
• Perforated option (with liner) available on the file drawer only.
(Not available on box drawers or with Crescent, Linear and
Classic pulls.)
• Optional drawer pulls include Ellipse, Radius, Taper,
Crescent, Linear and Classic pulls.
• –Ellipse pull available in non-Metallic trim colors only.
• –Radius pull available in Metallic trim colors only.
• –Taper pull trim color matches case trim color.
• –Crescent, Linear and Classic pulls are brushed nickel finish.
Available on RUSH.
Painted Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
S
Painted
Painted Perforated file drawer front options
K Meteors
N Constellation
Q Galaxy
2 Pull (see side bar)
2) Trim color for drawer fronts and case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Trim color for lock plug.
Specification Tips
• Specify pedestal accessories separately, as required.
• See appropriate price book for specification requirements.
• Use corner brackets and/or cantilevers to attach the
worksurface to the panel.
• Specify worksurface height adjustment kit if mounting
worksurface up to 2′′(51mm) higher than standard mounting
height; specify separately.
Wood Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
W Wood
2 Pull (see side bar)
2) Trim color for case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Wood finish for drawer fronts.
5) Trim color for lock plug.
*Note: $58 upcharge (list) for drawer fronts/case
Metallic trim color.
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
299
UniGroup Too Price List
X Series Suspended Pedestals
for use with UniGroup Too, UniGroup, PLACES
Box/File — Suspended
Actual
Height
Actual
Depth
Actual
Width
19 5/8′′
(498mm)
17′′
(432mm)
15′′
(381mm)
19 5/8′′
(498mm)
23′′
(584mm)
15′′
(381mm)
Description
Pull
Number 1 2
(S)
Painted
Price
Box/File
1
JPHA-18-
1
$327
$345
$536
$553
JPHA-18JPHA-18JPHA-24-
1
370
382
$350
388
Box/File
2, 3
7, 8, 9
1
579
591
$558
596
608
$576
Box/Box/File
2, 3
7, 8, 9
1
JPHA-24JPHA-24JPHH-18-
1
393
405
$449
601
613
$715
619
631
$738
Box/Box/File
2, 3
7, 8, 9
1
JPHH-18JPHH-18JPHH-24-
1
517
533
$476
783
799
$741
806
822
$765
File/File
2, 3
7, 8, 9
1
JPHH-24JPHH-24JPHJ-18-
1
544
560
$368
809
825
$615
833
849
$639
File/File
2, 3
7, 8, 9
1
JPHJ-18JPHJ-18JPHJ-24-
1
411
423
$393
658
670
$643
682
694
$664
2, 3
7, 8, 9
JPHJ-24JPHJ-24-
686
698
707
719
JPHA-24
Box/Box/File— Suspended
25 5/8′′
(651mm)
25 5/8′′
(651mm)
25 5/8′′
(651mm)
JPHH-24
17′′
(432mm)
23′′
(584mm)
17′′
(432mm)
15′′
(381mm)
15′′
(381mm)
15′′
(381mm)
File/File— Suspended
25 5/8′′
(651mm)
23′′
(584mm)
15′′
(381mm)
Features
JPHJ-24
2
Pull Styles
Ellipse
Crescent
Radius
Linear
Taper
Classic
436
448
(K-N-Q)
(W)
(W)
Painted
Wood Wood
Perf. Price Price I Price II
$368
411
$467
535
$494
562
$401
444
$426
469
To Order, Specify:
• Includes attachment hardware, one black pencil tray.
• Box drawer includes one divider; file drawer includes one
compressor.
• Standard with lock; keyed alike and master keying options
available.
• Drawers interiors and accessories are black.
• Suspended units must be attached under a worksurface
equal to or deeper than pedestal depth.
• Optional drawer fronts include painted, painted perforated or
wood.
• Perforated option (with liner) available on the file drawer only.
(Not available on box drawers or with Crescent, Linear and
Classic pulls.)
• Optional drawer pulls include Ellipse, Radius, Taper,
Crescent, Linear and Classic pulls.
• –Ellipse pull available in non-Metallic trim colors only.
• –Radius pull available in Metallic trim colors only.
• –Taper pull trim color matches case trim color.
• –Crescent, Linear and Classic pulls are brushed nickel finish.
Specification Tips
• Specify pedestal accessories separately, as required.
• See appropriate price book for specification requirements.
• Use corner brackets and/or cantilevers to attach the
worksurface to the panel.
• Suspended pedestals can only be used with RACE,
UniGroup, UniGroup Too, and PLACES systems applications.
Painted Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
S
Painted
Painted Perforated file drawer front options
K Meteors
N Constellation
Q Galaxy
2 Pull (see side bar)
2) Trim color for drawer fronts and case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Trim color for lock plug.
Wood Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
W Wood
2 Pull (see side bar)
2) Trim color for case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Wood finish for drawer fronts.
5) Trim color for lock plug.
*Note: $58 upcharge (list) for drawer fronts/case
Metallic trim color.
300
April 2008 / USA
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
X Series Mobile Pedestals
for use with UniGroup Too, UniGroup, PLACES
Box/File — Mobile
Actual
Height
Actual
Depth
Actual
Width
21 1/2′′
(546mm)
17′′
(432mm)
15′′
(381mm)
21 1/2′′
(546mm)
27 1/2′′
(699mm)
JPMA-24
23′′
(584mm)
17′′
(432mm)
15′′
(381mm)
15′′
(381mm)
Description
Pull
Number 1 2
(S)
Painted
Price
Box/File
1
JPMA-18-
1
$479
$497
$ 683
$ 705
JPMA-18JPMA-18JPMA-24-
1
522
534
$515
540
Box/File
2, 3
7, 8, 9
1
726
738
$ 718
748
760
$ 741
Box/Box/File
2, 3
7, 8, 9
1
JPMA-24JPMA-24JPMH-18-
1
558
570
$592
761
773
$ 854
784
796
$ 881
Box/Box/File
2, 3
7, 8, 9
1
JPMH-18JPMH-18JPMH-24-
1
660
676
$619
922
938
$ 880
949
965
$ 908
Box/Box/File
2, 3
7, 8, 9
1
JPMH-24JPMH-24JPMH-30-
1
687
703
$683
948
964
$ 942
976
992
$ 972
File/File
2, 3
7, 8, 9
1
JPMH-30JPMH-30JPMJ-18-
1
751
767
$555
1010
1026
$ 801
1040
1056
$ 826
File/File
2, 3
7, 8, 9
1
JPMJ-18JPMJ-18JPMJ-24-
1
598
610
$579
844
856
$ 824
869
881
$ 850
File/File
2, 3
7, 8, 9
1
JPMJ-24JPMJ-24JPMJ-30-
1
622
634
$640
867
879
$ 883
893
905
$ 911
2, 3
7, 8, 9
JPMJ-30JPMJ-30-
926
938
954
966
Box/Box/File— Mobile
27 1/2′′
(699mm)
27 1/2′′
(699mm)
23′′
(584mm)
29′′
(737mm)
15′′
(381mm)
15′′
(381mm)
JPMH-24
File/File — Mobile
27 1/2′′
(699mm)
27 1/2′′
(699mm)
27 1/2′′
(699mm)
17′′
(432mm)
23′′
(584mm)
29′′
(737mm)
JPMJ-24
2
Pull Styles
Ellipse
Radius
Taper
Crescent
Linear
Classic
15′′
(381mm)
15′′
(381mm)
15′′
(381mm)
Features
683
695
(K-N-Q)
(W)
(W)
Painted
Wood Wood
Perf. Price Price I Price II
$533
576
$610
678
$637
705
$701
769
$588
631
$612
655
$673
716
To Order, Specify:
• Casters: Black; non-locking, 2 swivel (rear), 2 fixed (front).
• Standard with lock; keyed alike and master keying options
available.
• Optional drawer fronts include painted, painted perforated or
wood.
• Perforated option (with liner) available on file drawer only.
(Not available on box drawers or with Crescent, Linear and
Classic pulls.)
• Crescent, Linear and Classic pulls are available on painted
steel or wood drawer fronts only.
• Optional drawer pulls include Ellipse, Radius, Taper,
Crescent, Linear and Classic.
• –Ellipse pull available in non-Metallic trim colors only.
• –Radius pull available in Metallic trim colors only.
• –Taper pull trim color matches case trim color.
• –Crescent, Linear and Classic pulls are brushed nickel finish.
Available on RUSH.
Painted Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
S
Painted
Painted Perforated file drawer front options
K Meteors
N Constellation
Q Galaxy
2 Pull (see side bar)
2) Trim color for drawer fronts and case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Trim color for lock plug.
Wood Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
W Wood
2 Pull (see side bar)
2) Trim color for case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Wood finish for drawer fronts.
5) Trim color for lock plug.
*Note: $58 upcharge (list) for drawer fronts/case
Metallic trim color.
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
301
UniGroup Too Price List
X Series Pedestal Accessories
for use with UniGroup Too, UniGroup, PLACES
Pencil Tray
Height
Depth
Width
Number
Price
1 1/4′′(32mm)
5 1/2′′(140mm)
12 7/8′′(327mm)
JPTA-6
$24
Features
To Order, Specify:
• Includes one black plastic tray.
• Suspends from sides of 6′′(152mm) drawer and slides for
drawer access.
1) Product number.
(No finish specification required.)
Available on RUSH.
JPTA-6
Dividers
3′′(76mm)
12′′(305mm)
JBDA-6
$23
Features
To Order, Specify:
•
•
•
•
1) Product number.
(No finish specification required.)
Includes six dividers.
Spans 6′′(152mm) drawer from side-to-side.
Adjusts in 1′′(25mm) increments from front to back of drawer.
Standard in black finish color only.
Available on RUSH.
JBDA-6
CD Holder
6 1/2′′(165mm)
12 3/4′′(324mm)
6′′(152mm)
JCDA-12
$21
Features
To Order, Specify:
• Fits side-to-side inside file drawer.
• Holds 24 CD jewel cases.
• Standard in black finish color only.
1) Product number.
(No finish specification required.)
JCDA-12
Worksurface Height
Adjustment Kit for Attached
Pedestal
1-2′′(25-51mm)
JAKA-18
JAKA-24
JAKA-30
Features
To Order, Specify:
• Includes top and eight height adjustment spacers and
attachment hardware.
• Provides height adjustment for pedestal-supported
worksurfaces.
• Raises worksurfaces in 1′′(25mm) increments up to
2′′(51mm) above standard worksurface height.
• Standard in charcoal finish color only.
1) Product number.
$146
146
146
2) Trim color.
JAKA-18
Pedestal Cushion Kit
Height
Depth
Width
Number
Fabric Grade
A
B
C
D
2′′(51mm)
2′′(51mm)
17′′(432mm)
23′′(584mm)
15′′(381mm)
15′′(381mm)
JCTA-18
JCTA-24
$141
$245
$180
$289
$190
$299
$158
$267
Features
To Order, Specify:
• Includes cushion with fastener.
• For use on 18′′(457mm) and 24′′(610mm) deep mobile
pedestal.
• Field installed.
• COM yardage: 1 yard
1) Product number.
2) Fabric surface/color.
JCTA-24
Stationary Pedestal
Conversion Kit
302
April 2008 / USA
Depth
Number
Price
18′′(457mm)
24′′(610mm)
30′′(762mm)
JSCK-18
JSCK-24
JSCK-30
$117
117
117
Features
To Order, Specify:
• Includes top, counterweight, and attachment hardware.
• Converts suspended or attached pedestal to stationary
pedestal.
1) Product number.
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Trim color.
UniGroup Too Price List
X Series Lateral Files — Attached
for use with UniGroup Too, UniGroup, PLACES
Two-High Lateral File
Painted, Painted Perforated
or Wood Drawer Fronts —
Attached
Actual
Height
Actual
Depth
Actual
Width
27 1/2′′
(699mm)
18 3/4′′
(476mm)
29 7/8′′
(759mm)
27 1/2′′
(699mm)
27 1/2′′
(699mm)
Pull Styles
Ellipse
Radius
Taper
18 3/4′′
(476mm)
35 7/8′′
(911mm)
41 7/8′′
(1064mm)
Number 1 2
1
JLPD-0230-
$685
$718
$ 851
$ 878
2, 3
7, 8, 9
1
JLPD-0230JLPD-0230JLPD-0236-
730
740
$803
763
896
906
$ 996
923
933
$1027
2, 3
7, 8, 9
1
JLPD-0236JLPD-0236JLPD-0242-
1041
1051
$1106
1072
1082
$1141
2, 3
7, 8, 9
JLPD-0242JLPD-0242-
1151
1161
1186
1196
1A
A
A
1A
A
A
1A
A
A
Features
JLPD-S1A
2
18 3/4′′
(476mm)
Pull
(S)
Painted
Price
Crescent
Linear
Classic
848
858
$893
(K-N-Q)
Painted
Perf. Price
(W)
Wood
Price I
(W)
Wood
Price II
$836
881
$926
938
948
971
To Order, Specify:
• Includes attachment hardware, and adjustable side-to-side
hanging bars.
• Attached files must be attached under a worksurface
20′′(508mm) or deeper; does not include counterweight.
• Standard with lock; keyed-alike and master keying options
available.
• Glides provide 1 1/2′′(38mm) adjustment range.
• Drawer interiors and accessories are black.
• Optional drawer fronts include painted, painted perforated or
wood.
• Painted perforated lateral file drawer front does not include
inner liner.
• Optional drawer pulls include Ellipse, Radius, Taper,
Crescent, Linear and Classic.
• –Ellipse pull available in non-Metallic trim colors only.
• –Radius pull available in Metallic trim colors only.
• –Taper pull trim color matches case trim color.
• –Crescent, Linear and Classic pulls are brushed nickel finish.
• Crescent, Linear and Classic pulls are available on painted
steel or wood drawer fronts only.
Available on RUSH.
Specification Tips
• Use corner brackets and/or cantilevers to attach the
worksurface to the panel.
• Specify lateral file accessories separately, as required.
• Specify worksurface height adjustment kit if mounting
worksurface up to 2′′(51mm) higher than standard mounting
height; specify separately.
Painted Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
S
Painted
Painted Perforated drawer front options
K Meteors
N Constellation
Q Galaxy
2 Pull (see side bar)
2) Trim color for drawer fronts and case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Trim color for lock plug.
Wood Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
W Wood
2 Pull (see side bar)
2) Trim color for case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Wood finish for drawer fronts.
5) Trim color for lock plug.
*Note: $89 upcharge (list) for drawer fronts/case
Metallic trim color.
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
303
UniGroup Too Price List
X Series Lateral Files — Freestanding
for use with UniGroup Too, UniGroup, PLACES
Two-High Lateral
File Painted,
Painted Perforated or
Wood Drawer Fronts —
Freestanding
Actual
Height
Actual
Depth
Actual
Width
27 1/2′′
(699mm)
18 3/4′′
(476mm)
29 7/8′′
(759mm)
27 1/2′′
(699mm)
27 1/2′′
(699mm)
Pull Styles
Ellipse
Radius
Taper
18 3/4′′
(476mm)
35 7/8′′
(911mm)
41 7/8′′
(1064mm)
Number 1 2
1
JLPD-0230-
1
$ 785
$ 818
$ 951
$ 978
2, 3
7, 8, 9
1
JLPD-0230JLPD-0230JLPD-0236-
863
1
830
840
$ 913
996
1006
$1106
1023
1033
$1137
2, 3
7, 8, 9
1
JLPD-0236JLPD-0236JLPD-0242-
1
958
968
$1034
1151
$1161
$1247
1182
1192
$1282
2, 3
7, 8, 9
JLPD-0242JLPD-0242-
1292
1302
1327
1337
Features
JLPD-S1
2
18 3/4′′
(476mm)
Pull
(S)
Painted
Price
Crescent
Linear
Classic
(K-N-Q)
Painted
Perf. Price
(W)
Wood
Price I
(W)
Wood
Price II
$ 946
991
$1067
1079
1089
1112
To Order, Specify:
• Includes adjustable side-to-side hanging bars.
• Two-high freestanding files are standard with installed
counterweight.
• Standard with lock; keyed-alike and master keying options
available.
• Optional drawer fronts include painted, painted perforated or
wood.
• Painted perforated lateral file drawer front does not include
inner liner.
• Crescent, Linear and Classic pulls are available on painted
steel or wood drawer fronts only.
• Optional drawer pulls include Ellipse, Radius, Taper,
Crescent, Linear and Classic.
• –Ellipse pull available in non-Metallic trim colors only.
• –Radius pull available in Metallic trim colors only.
• –Taper pull trim color matches case trim color.
• –Crescent, Linear and Classic pulls are brushed nickel finish.
Available on RUSH.
Painted Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
S
Painted
Painted Perforated drawer front options
K Meteors
N Constellation
Q Galaxy
2 Pull (see side bar)
2) Trim color for drawer fronts and case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Trim color for lock plug.
Wood Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
W Wood
2 Pull (see side bar)
2) Trim color for case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Wood finish for drawer fronts.
5) Trim color for lock plug.
*Note: $89 upcharge (list) for drawer fronts/case
Metallic trim color.
304
April 2008 / USA
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
X Series Lateral Files — Freestanding
for use with UniGroup Too, UniGroup, PLACES
Three-High Lateral File
Painted, Painted Perforated
or Wood Drawer Fronts
Actual
Height
Actual
Depth
Actual
Width
39 1/2′′
(1003mm)
18 3/4′′
(476mm)
29 7/8′′
(759mm)
39 1/2′′
(1003mm)
39 1/2′′
(1003mm)
JLPD-S1
2
Radius
Taper
18 3/4′′
(476mm)
35 7/8′′
(911mm)
41 7/8′′
(1064mm)
Number 1 2
1
JLPD-0330-
1
$ 922
$ 972
$1209
$1247
2, 3
7, 8, 9
1
JLPD-0330JLPD-0330JLPD-0336-
1039
1
989
1006
$1065
1276
1293
$1393
1314
1331
$1436
2, 3
7, 8, 9
1
JLPD-0336JLPD-0336JLPD-0342-
1
1132
1149
$1219
1460
1477
$1599
1503
1520
$1648
2, 3
7, 8, 9
JLPD-0342JLPD-0342-
1666
1683
1715
1732
Features
Pull Styles
Ellipse
18 3/4′′
(476mm)
Pull
(S)
Painted
Price
Crescent
Linear
Classic
(K-N-Q)
Painted
Perf. Price
(W)
Wood
Price I
(W)
Wood
Price II
$1115
1182
$1269
1286
1303
1336
To Order, Specify:
• Includes adjustable side-to-side hanging bars.
• Counterweight option recommended if files are not ganged
together or anchored to a fixed object; specify separately.
• Standard with lock; keyed-alike and master keying options
available.
• Optional drawer fronts include painted, painted perforated or
wood.
• Painted perforated lateral file drawer front does not include
inner liner.
• Crescent, Linear and Classic pulls are available on painted
steel or wood drawer fronts only.
• Optional drawer pulls include Ellipse, Radius, Taper,
Crescent, Linear and Classic.
• –Ellipse pull available in non-Metallic trim colors only.
• –Radius pull available in Metallic trim colors only.
• –Taper pull trim color matches case trim color.
• –Crescent, Linear and Classic pulls are brushed nickel finish.
Available on RUSH.
Painted Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
S
Painted
Painted Perforated drawer front options
K Meteors
N Constellation
Q Galaxy
2 Pull (see side bar)
2) Trim color for drawer fronts and case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Trim color for lock plug.
Wood Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
W Wood
2 Pull (see side bar)
2) Trim color for case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Wood finish for drawer fronts.
5) Trim color for lock plug.
*Note: $117 upcharge (list) for drawer fronts/case
Metallic trim color.
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
305
UniGroup Too Price List
X Series Lateral Files — Freestanding
for use with UniGroup Too, UniGroup, PLACES
Four-High Lateral File
Painted, Painted Perforated
or Wood Drawer Fronts
Actual
Height
Actual
Depth
Actual
Width
51 1/2′′
(1308mm)
18 3/4′′
(476mm)
29 7/8′′
(759mm)
51 1/2′′
(1308mm)
51 1/2′′
(1308mm)
18 3/4′′
(476mm)
18 3/4′′
(476mm)
35 7/8′′
(911mm)
41 7/8′′
(1064mm)
Pull
Number 1 2
(S)
Painted
Price
1
JLPD-0430-
1
$1167
$1234
$1448
$1493
2, 3
7, 8, 9
1
JLPD-0430JLPD-0430JLPD-0436-
1324
1
1257
1278
$1381
1538
1559
$1704
1583
1604
$1757
2, 3
7, 8, 9
1
JLPD-0436JLPD-0436JLPD-0442-
1
1471
1492
$1580
1794
1815
$1955
1847
1868
$2015
2, 3
7, 8, 9
JLPD-0442JLPD-0442-
2045
2066
2105
2126
Features
JLPD-S1
2
Pull Styles
Ellipse
Radius
Taper
Crescent
Linear
Classic
(K-N-Q)
Painted
Perf. Price
(W)
Wood
Price I
(W)
Wood
Price II
$1448
1538
$1647
1670
1691
1737
To Order, Specify:
• Includes adjustable side-to-side hanging bars.
• Counterweight option recommended if files are not ganged
together or anchored to a fixed object; specify separately.
• Standard with lock; keyed-alike and master keying options
available.
• Optional drawer fronts include painted, painted perforated or
wood.
• Painted perforated lateral file drawer front does not include
inner liner.
• Crescent, Linear and Classic pulls are available on painted
steel or wood drawer fronts only.
• Optional drawer pulls include Ellipse, Radius, Taper,
Crescent, Linear and Classic.
• –Ellipse pull available in non-Metallic trim colors only.
• –Radius pull available in Metallic trim colors only.
• –Taper pull trim color matches case trim color.
• –Crescent, Linear and Classic pulls are brushed nickel finish.
Available on RUSH.
Painted Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
S
Painted
Painted Perforated drawer front options
K Meteors
N Constellation
Q Galaxy
2 Pull (see side bar)
2) Trim color for drawer fronts and case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Trim color for lock plug.
Wood Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
W Wood
2 Pull (see side bar)
2) Trim color for case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Wood finish for drawer fronts.
5) Trim color for lock plug.
*Note: $146 upcharge (list) for drawer fronts/case
Metallic trim color.
306
April 2008 / USA
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
X Series Lateral Files — Freestanding
for use with UniGroup Too, UniGroup, PLACES
Five-High Lateral File
Painted, Painted Perforated
or Wood Drawer Fronts
Actual
Height
Actual
Depth
Actual
Width
63 1/2′′
(1613mm)
18 3/4′′
(476mm)
29 7/8′′
(759mm)
63 1/2′′
(1613mm)
63 1/2′′
(1613mm)
18 3/4′′
(476mm)
18 3/4′′
(476mm)
35 7/8′′
(911mm)
41 7/8′′
(1064mm)
Pull
Number 1 2
(S)
Painted
Price
1
JLPD-0530-
1
$1400
$1484
$1896
$1954
2, 3
7, 8, 9
1
JLPD-0530JLPD-0530JLPD-0536-
1594
1
1510
1539
$1643
2006
2035
$2216
2064
2093
$2284
2, 3
7, 8, 9
1
JLPD-0536JLPD-0536JLPD-0542-
1
1753
1782
$1888
2326
2355
$2547
2394
2423
$2626
2, 3
7, 8, 9
JLPD-0542JLPD-0542-
2657
2686
2736
2765
Features
JLPD-S1
2
Pull Styles
Ellipse
Radius
Crescent
Linear
(W)
Wood
Price I
(W)
Wood
Price II
$1727
1837
$1972
1998
2027
2082
To Order, Specify:
• Includes adjustable side-to-side hanging bars.
• Counterweight option recommended if files are not ganged
together or anchored to a fixed object; specify separately.
• Standard with lock; keyed-alike and master keying options
available.
• Optional drawer fronts include painted, painted perforated or
wood.
• Painted perforated lateral file drawer front does not include
inner liner.
• Crescent, Linear and Classic pulls are available on painted
steel or wood drawer fronts only.
• Optional drawer pulls include Ellipse, Radius, Taper,
Crescent, Linear and Classic.
• –Ellipse pull available in non-Metallic trim colors only.
• –Radius pull available in Metallic trim colors only.
• –Taper pull trim color matches case trim color.
• –Crescent, Linear and Classic pulls are brushed nickel finish.
Available on RUSH.
Taper
(K-N-Q)
Painted
Perf. Price
Classic
Painted Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
S
Painted
Painted Perforated drawer front options
K Meteors
N Constellation
Q Galaxy
2 Pull (see side bar)
2) Trim color for drawer fronts and case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Trim color for lock plug.
Wood Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
W Wood
2 Pull (see side bar)
2) Trim color for case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Wood finish for drawer fronts.
5) Trim color for lock plug.
*Note: $174 upcharge (list) for drawer fronts/case
Metallic trim color.
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
307
UniGroup Too Price List
X Series Lateral Files — Freestanding
for use with UniGroup Too, UniGroup, PLACES
Five-High Lateral File
Painted, Painted Perforated
or Wood Drawer Fronts —
with Swing Doors
Actual
Height
Actual
Depth
Actual
Width
63 1/2′′
(1613mm)
18 3/4′′
(476mm)
29 7/8′′
(759mm)
63 1/2′′
(1613mm)
63 1/2′′
(1613mm)
18 3/4′′
(476mm)
18 3/4′′
(476mm)
35 7/8′′
(911mm)
41 7/8′′
(1064mm)
Pull
Number 1 2
(S)
Painted
Price
1
JLPS-0530-
1
$1424
$1524
$1919
$1978
2, 3
7, 8, 9
1
JLPS-0530JLPS-0530JLPS-0536-
1656
1
1556
1590
$1674
2051
2085
$2246
2110
2144
$2315
2, 3
7, 8, 9
1
JLPS-0536JLPS-0536JLPS-0542-
1
1806
1840
$1922
2378
2412
$2580
2447
2481
$2660
2, 3
7, 8, 9
JLPS-0542JLPS-0542-
2712
2746
2792
2826
Features
JLPS-S1
2
Pull Styles
Ellipse
Crescent
Radius
Linear
Taper
Classic
(K-N-Q)
Painted
Perf. Price
(W)
Wood
Price I
(W)
Wood
Price II
$1774
1906
$2022
2054
2088
2154
To Order, Specify:
• Includes adjustable side-to-side hanging bars.
• Equipped with four drawers and two swing doors with fixed
shelf in top position.
• Standard with lock; keyed-alike and master keying options
available.
• Top shelf accommodates media up to 11 7/8′′(302mm) high.
• Doors lock simultaneously with drawers.
• Counterweight option recommended if files are not ganged
together or anchored to a fixed object; specify separately.
• Optional drawer fronts include painted, painted perforated or
wood.
• Painted perforated lateral file drawer front does not include
inner liner, swing doors include inner liner.
• Crescent, Linear and Classic pulls are available on painted
steel or wood drawer fronts only.
• Optional drawer pulls include Ellipse, Radius, Taper,
Crescent, Linear and Classic.
• –Ellipse pull available in non-Metallic trim colors only.
• –Radius pull available in Metallic trim colors only.
• –Taper pull trim color matches case trim color.
• –Crescent, Linear and Classic pulls are brushed nickel finish
and are oriented vertically on the swing doors.
Available on RUSH.
Painted Drawer Fronts
1) Product number, including:
1 Drawer/Door Front Style:
S
Painted
Painted Perforated drawer front options
K Meteors
N Constellation
Q Galaxy
2 Pull (see side bar)
2) Trim color for drawer fronts and case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Trim color for lock plug.
Wood Drawer Fronts
1) Product number, including:
1 Drawer/Door Front Style:
W Wood
2 Pull (see side bar)
2) Trim color for case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Wood finish for drawer fronts.
5) Trim color for lock plug.
*Note: $174 upcharge (list) for drawer fronts/case
Metallic trim color.
308
April 2008 / USA
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
X Series Lateral File Accessories
for use with UniGroup Too, UniGroup, PLACES
Front-to-Back Hanging Bars
Depth
Number
Price
15 1/2′′(394mm)
JFFA-15
$24
Features
To Order, Specify:
• Includes two front-to-back hanging bars.
• Spans between side-to-side hanging bars in lateral file
drawers to convert drawer to front-to-back suspended filing
format.
• Rear hanging bars must be set at EDP depth.
• Standard in black finish color only.
1) Product number.
(No finish specification required.)
Available on RUSH.
JFFA-15
Side-to-Side Hanging Bars
File Width
Number
Price
30′′(762mm)
36′′(914mm)
42′′(1067mm)
JFHA-30
JFHA-36
JFHA-42
$41
41
41
Features
To Order, Specify:
• Includes two side-to-side hanging bars.
• Standard in black finish color only.
1) Product number.
(No finish specification required.)
Note: Side-to-side hanging bars ship standard in all lateral file
drawers.
JFHA
Dividers
Available on RUSH.
Height
Number
Price
7′′(178mm)
JFDA-15
$24
Features
To Order, Specify:
• Includes three dividers that insert into 1′′(25mm) incremental
slots in bottom and back of file drawer.
• Standard in black finish color only.
1) Product number.
(No finish specification required.)
Available on RUSH.
JFDA-15
Compressor
Height
File Width
Number
Price
7′′(178mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
JFCA-30
JFCA-36
JFCA-42
$24
24
24
Features
To Order, Specify:
• Includes one compressor and horizontal track.
• Spring clip release for manual drawer settings.
• Standard in black finish color only.
1) Product number.
(No finish specification required.)
Available on RUSH.
JFCA
Counterweight
JFWA
File Width
Number
Price
30′′(762mm)
36′′(914mm)
42′′(1067mm)
JFWA-30
JFWA-36
JFWA-42
$100
110
141
Features
To Order, Specify:
• Includes counterweight and attachment hardware.
• Required for use with three-, four- or five-high freestanding
lateral files when not ganged together or anchored to a fixed
object.
• Standard in black finish color only.
1) Product number.
(No finish specification required.)
Note: Two-high freestanding lateral files ship standard with
installed counterweight.
Available on RUSH.
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
309
UniGroup Too Price List
X Series Personal Storage Towers with Upper Storage
for use with UniGroup Too, UniGroup, PLACES
Four-High with
Hinged Door
Upper Storage
Actual
Height
Actual
Depth
Actual
Width
51 1/2′′
(1308mm)
23′′
(584mm)
24′′
(610mm)
51 1/2′′
(1308mm)
51 1/2′′
(1308mm)
51 1/2′′
(1308mm)
JTHB-5124
23′′
(584mm)
23′′
(584mm)
23′′
(584mm)
24′′
(610mm)
24′′
(610mm)
24′′
(610mm)
Description Pull
Number 1 2 3
(SS)
(KK-NN-QQ) (WW) (WW)
Painted Painted
Wood Wood
Price
Perf. Price Price I Price II
Box/Box/File
Valet Right
24′′(610mm)
Storage
Box/Box/File
Valet Left
24′′(610mm)
Storage
File/File
Valet Right
24′′(610mm)
Storage
File/File
Valet Left
24′′(610mm)
Storage
1
JTHB-5124-
1
$2241
$2277
$2731 $2816
2, 3
7, 8, 9
1
JTHB-5124JTHB-5124JTHE-5124-
2388
1
2352
2380
$2241
2842
2927
2870
2955
$2731 $2816
2, 3
7, 8, 9
1
JTHE-5124JTHE-5124JTHG-5124-
1
2352
2380
$2082
2, 3
7, 8, 9
1
JTHG-5124JTHG-5124JTHJ-5124-
1
2172
2193
$2082
2, 3
7, 8, 9
JTHJ-5124JTHJ-5124-
Features
JTHJ-5124
2
Pull Styles
Ellipse
Crescent
Radius
Linear
Taper
Classic
$2277
2388
$2133
2223
$2118
2172
2082
2842
2927
2870
2955
$2559 $2639
2649
2729
2670
2750
$2559 $2639
2208
2649
2559
To Order, Specify:
• 24′′(610mm) storage unit includes one adjustable shelf.
• Valet and storage doors lock independently with lock located
below pulls.
• Drawers lock together with lock located in right side of lock
fascia.
• Optional translucent top adds 2 3/4′′(70mm) to overall height
of unit.
• Optional drawer/door fronts include painted, painted
perforated or wood.
• Perforated option (with liner) available on file drawer and
storage doors only. (Not available on box drawers, valet
or with Crescent, Linear and Classic pulls.)
• Crescent, Linear and Classic pulls are available on painted
steel or wood drawer fronts only.
• Optional drawer pulls include Ellipse, Radius, Taper,
Crescent, Linear and Classic.
• –Ellipse pull available in non-Metallic trim colors only.
• –Radius pull available in Metallic trim colors only.
• –Taper pull trim color matches case trim color.
• –Crescent, Linear and Classic pulls are brushed nickel finish.
• Caster option adds 3′′(76mm) to overall height.
• Leg option adds 5 1/8′′(130mm) to overall height.
• –Legs are color matched to case with black adjustment
extensions.
• –Adjustment extensions provide 1 1/2′′(38mm)adjustment
range.
• –Field installed.
• Caster and leg option limited to unit heights up to
51 1/2′′(1308mm) high.
• Towers can be varied in height, in 1′′(25mm) increments from
standard heights between 47.5′′(1207mm) and
73.5′′(1867mm). Contact Haworth Specials for ordering
information.
Painted Drawer/Door Fronts
1) Product number, including:
1 Drawer/Door Front Style:
SS Painted
Painted Perforated file drawer/storage door front
options
KK Meteors
NN Constellation
QQ Galaxy
2 Pull (see side bar)
3 Top Option:
R Regular top
T
Translucent top; add $423 list
2) Trim color for drawer/door/case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Trim color for lock plug.
Wood Drawer/Door Fronts
1) Product number, including:
1 Drawer/Door Front Style:
WW Wood
Leg Option
2 Pull (see side bar)
Leg Option requires modification of the product number.
Add L to the product number and add $176 list.
3 Top Option:
Example: JTHB-5124-SS1RL
R Regular top
T
Caster Option
Caster Option requires modification of the product number.
Add C to the product number and add $195 list.
Example: JTHB-5124-SS1RC
Translucent top; add $423 list
2) Trim color for case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Wood finish for drawer/door fronts.
5) Trim color for lock plug.
*Note: $195 upcharge (list) for drawer/door/
case Metallic trim color.
310
April 2008 / USA
2729
2639
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
X Series Personal Storage Towers with Upper Storage — Translucent Doors
for use with UniGroup Too, UniGroup, PLACES
Actual
Height
Four-High with
Hinged Door
Upper Storage —
Translucent Doors
JTHB-5124-SU3
JTHJ-5124-SU3
Actual
Depth
Actual
Width
Description
51 1/2′′
23′′
24′′
Box/Box/File
(1308mm) (584mm) (610mm) Valet Right
24′′(610mm)
Storage
Box/Box/File
Valet Left
24′′(610mm)
Storage
51 1/2′′
23′′
24′′
File/File
(1308mm) (584mm) (610mm) Valet Right
24′′(610mm)
Storage
File/File
Valet Left
24′′(610mm)
Storage
Number
JTHB-5124-
1
2
U3
(S)
(K-N-Q)
(W)
(W)
Translucent Painted Painted
Wood Wood
Color
Price
Perf. Price Price I Price II
White
Patterned
JTHE-5124-
U3
White
Patterned
JTHG-5124-
U3
White
Patterned
JTHJ-5124-
U3
Features
White
Patterned
$2563
$2581
$2767
$2852
2917
2935
3121
3206
$2563
$2581
$2767
$2852
2917
2935
3121
3206
$2382
$2415
$2573
$2653
2736
2769
2927
3007
$2382
$2400
$2573
$2653
2736
2754
2927
3007
To Order, Specify:
• 24′′(610mm) storage unit includes one adjustable shelf.
• Translucent doors are non-locking.
• Drawers lock together with lock located in right side of lock
fascia.
• Optional translucent top option adds 2 3/4′′(70mm) to overall
height of unit.
• Optional drawer fronts include painted, painted perforated or
wood.
• Perforated option (with liner) available on file drawer only.
• Personal Storage Towers with translucent doors are standard
with Taper pulls only.
• Taper pulls on translucent doors are full-height and match
case trim color.
• Caster option adds 3′′(76mm) to overall height.
• Leg option adds 5 1/8′′(130mm) to overall height.
• –Legs are color matched to case with black adjustment
extensions.
• –Adjustment extensions provide 1 1/2′′(38mm) adjustment
range.
• –Field installed.
• Caster and leg option limited to unit heights up to
51 1/2′′(1308mm) high.
• Towers can be varied in height, in 1′′(25mm) increments from
standard heights between 47.5′′(1207mm) and
73.5′′(1867mm). Contact Haworth Specials for ordering
information.
Painted Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
S Painted
Painted Perforated file drawer front options
K Meteors
N Constellation
Q Galaxy
2 Top Option:
R Regular top
T
Translucent top; add $423 list
2) Trim color for drawer fronts and case.*
3) Translucent color for doors.
4) Trim color for lock plug.
Wood Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
W Wood
Leg Option
Leg Option requires modification of the product number.
Add L to the product number and add $176 list.
Example: JTHB-5124-SU3RL
2 Top Option:
R Regular top
T
Translucent top; add $423 list
Caster Option
2) Trim color for case.*
Caster Option requires modification of the product number.
Add C to the product number and add $195 list.
3) Translucent color for doors.
Example: JTHB-5124-SU3RC
5) Trim color for lock plug.
4) Wood finish for drawer fronts.
*Note: $195 upcharge (list) for drawer fronts/case
Metallic trim color.
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
311
UniGroup Too Price List
X Series Personal Storage Towers with Bookcase — Translucent Door
for use with UniGroup Too, UniGroup, PLACES
Actual
Height
Four-High with Bookcase —
Translucent Door
JTBB-5124-SU3
Actual Actual
Depth Width Description Number
51 1/2′′
23′′
24′′
Box/Box/File
(1308mm) (584mm) (610mm) Valet Right
24′′(610mm)
Bookcase
Box/Box/File
Valet Left
24′′(610mm)
Bookcase
51 1/2′′
23′′
24′′
File/File
(1308mm) (584mm) (610mm) Valet Right
24′′(610mm)
Bookcase
File/File
Valet Left
24′′(610mm)
Bookcase
1
JTBB-5124-
2
U3
(S)
(K-N-Q)
(W)
(W)
Translucent Painted Painted Wood Wood
Color
Price
Perf. Price Price I Price II
White
Patterned
JTBE-5124-
U3
White
Patterned
JTBG-5124-
U3
White
Patterned
JTBJ-5124-
U3
White
Patterned
Features
JTBJ-5124-SU3
2513
2531
$2259
$2277
2513
2531
$2092
$2125
2346
2379
$2092
$2125
2346
2379
$2471 $2548
2725
2802
$2471 $2548
2725
2802
$2292 $2363
2546
2617
$2292 $2363
2546
2617
Painted Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
S Painted
Painted Perforated file drawer front options
K Meteors
N Constellation
Q Galaxy
2 Top Option:
R Regular top
T
Translucent top; add $423 list
2) Trim color for drawer fronts and case.*
3) Translucent color for doors.
4) Trim color for lock plug.
Wood Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
W Wood
2 Top Option:
R Regular top
T
Translucent top; add $423 list
Leg Option requires modification of the product number.
Add L to the product number and add $176 list.
2) Trim color for case.*
Example: JTBB-5124-SU3RL
3) Translucent color for doors.
Caster Option
Caster Option requires modification of the product number.
Add C to the product number and add $195 list.
Example: JTBB-5124-SU3RC
April 2008 / USA
$2277
To Order, Specify:
• Bookcase has side access.
• 24′′(610mm) bookcase unit includes one adjustable shelf.
• Bookcase, shelves and valet interiors are color matched to
case.
• Translucent door is non-locking.
• Drawers lock together with lock located in right side of lock
fascia.
• Optional translucent top adds 2 3/4′′(70mm) to overall height
of unit.
• Optional drawer fronts include painted, painted perforated or
wood.
• Perforated option (with liner) available on file drawer only.
• Personal Storage Towers with translucent doors are standard
with Taper pulls only.
• Taper pulls on translucent doors are full-height and match
case trim color.
• Caster option adds 3′′(76mm) to overall height.
• Leg option adds 5 1/8′′(130mm) to overall height.
• –Legs are color matched to case with black adjustment
extensions.
• –Adjustment extensions provide 1 1/2′′(38mm) adjustment
range.
• –Field installed.
• Caster and leg option limited to unit heights up to
51 1/2′′(1308mm) high.
• Towers can be varied in height, in 1′′(25mm) increments from
standard heights between 47.5′′(1207mm) and
73.5′′(1867mm). Contact Haworth Specials for ordering
information.
Leg Option
312
$2259
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
4) Wood finish for drawer fronts.
5) Trim color for lock plug.
*Note: $195 upcharge (list) for drawer fronts/case
Metallic trim color.
UniGroup Too Price List
X Series Personal Storage Towers with Upper Storage
for use with UniGroup Too, UniGroup, PLACES
Five-High with
Hinged Door Upper
Storage
(Right)
JTHB-6324
Features
To Order, Specify:
• 24′′(610mm) storage unit includes one adjustable shelf.
• 36′′(914mm) storage unit includes two adjustable shelves.
• Valet and storage doors lock independently with lock located
below pulls.
• Drawers lock together with lock located in right side of
lock fascia.
• Optional translucent top adds 2 3/4′′(70mm) to overall height
of unit.
• Optional drawer/door fronts include painted, painted
perforated or wood.
• Perforated option (with liner) available on file drawer and
storage doors only. (Not available on box drawers, valet or
with Crescent, Linear and Classic pulls.)
• Crescent, Linear and Classic pulls are available on painted
steel or wood drawer fronts only.
• Optional drawer pulls include Ellipse, Radius, Taper,
Crescent, Linear and Classic.
• –Ellipse pull available in non-Metallic trim colors only.
• –Radius pull available in Metallic trim colors only.
• –Taper pull trim color matches case trim color.
• –Crescent, Linear and Classic pulls are brushed nickel finish.
• Towers can be varied in height, in 1′′(25mm) increments from
standard heights between 47.5′′(1207mm) and
73.5′′(1867mm). Contact Haworth Specials for ordering
information.
Painted Drawer/Door Fronts
1) Product number, including:
1 Drawer/Door Front Style:
SS Painted
Painted Perforated file drawer front options
KK Meteors
NN Constellation
QQ Galaxy
2 Pull (see below)
3 Top Option:
R Regular top
T
Translucent top; add $423 list
2) Trim color for drawer/door/case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Trim color for lock plug.
Wood Drawer/Door Fronts
1) Product number, including:
1 Drawer/Door Front Style:
WW Wood
2 Pull (see below)
(Left)
JTHH-6324
3 Top Option:
R Regular top
T
Translucent top; add $423 list
2) Trim color for case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Wood finish for drawer/door fronts.
5) Trim color for lock plug.
*Note: $222 upcharge (list) for drawer/door/
case Metallic trim color.
(Right)
JTHG-6324
2
Pull Styles
Ellipse
Crescent
Radius
Linear
Taper
Classic
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
313
UniGroup Too Price List
X Series Personal Storage Towers with Upper Storage
for use with UniGroup Too, UniGroup, PLACES
Five-High with
Hinged Door
Upper Storage
Actual
Height
Actual
Depth
Actual
Width
63 1/2′′
(1613mm)
23′′
(584mm)
24′′
(610mm)
63 1/2′′
(1613mm)
63 1/2′′
(1613mm)
63 1/2′′
(1613mm)
63 1/2′′
(1613mm)
63 1/2′′
(1613mm)
23′′
(584mm)
23′′
(584mm)
23′′
(584mm)
23′′
(584mm)
23′′
(584mm)
24′′
(610mm)
24′′
(610mm)
24′′
(610mm)
24′′
(610mm)
24′′
(610mm)
Description Pull
Number 1 2 3
(SS)
(KK-NN-QQ) (WW) (WW)
Painted Painted
Wood Wood
Price Perf. Price Price I Price II
Box/Box/File
Valet Right
36′′(914mm)
Storage
Box/Box/File
Valet Left
36′′(914mm)
Storage
Box/Box/File/
File
Valet Right
24′′(610mm)
Storage
Box/Box/File/
File
Valet Left
24′′(610mm)
Storage
File/File
Valet Right
36′′(914mm)
Storage
File/File
Valet Left
36′′(914mm)
Storage
1
JTHB-6324-
1
$2350
$2386
$2968
$3060
2, 3
7, 8, 9
1
JTHB-6324JTHB-6324JTHE-6324-
2497
1
2461
2489
$2350
3079
3107
$2968
3171
3199
$3060
2, 3
7, 8, 9
1
JTHE-6324JTHE-6324JTHN-6324-
1
2461
2489
$2624
3079
3107
$3234
3171
3199
$3334
2, 3
7, 8, 9
JTHN-6324JTHN-6324-
1
JTHH-6324-
2, 3
7, 8, 9
JTHH-6324JTHH-6324-
1
JTHG-6324-
2, 3
7, 8, 9
1
JTHG-6324JTHG-6324JTHJ-6324-
2, 3
7, 8, 9
JTHJ-6324JTHJ-6324-
Available on RUSH.
314
April 2008 / USA
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
$2386
2497
$2675
2756
2790
2807
3366
3400
3466
3500
$2624
$2675
$3234
$3334
2756
2790
2807
3366
3400
3466
3500
1
$2192
$2243
$2797
$2884
2331
1
2280
2303
$2192
2885
2908
$2797
2972
2995
$2884
2885
2908
2972
2995
1
2280
2303
$2243
2331
UniGroup Too Price List
X Series Personal Storage Towers with Upper Storage — Translucent Doors
for use with UniGroup Too, UniGroup, PLACES
Actual
Height
Five-High with
Hinged Door
Upper Storage —
Translucent Doors
JTHB-6324-SU3
Actual
Width
Description
63 1/2′′
23′′
24′′
Box/Box/File
(1613mm) (584mm) (610mm) Valet Right
36′′(914mm)
Storage
Box/Box/File
Valet Left
36’’(914mm)
Storage
63 1/2′′
23′′
24′′
Box/Box/File/File
(1613mm) (584mm) (610mm) Valet Right
24′′(610mm)
Storage
Box/Box/File/File
Valet Left
24′′(610mm)
Storage
63 1/2′′
23′′
24′′
File/File
(1613mm) (584mm) (610mm) Valet Right
36′′(914mm)
Storage
File/File
Valet Left
36′′(914mm)
Storage
Number
JTHB-6324-
1
2
U3
(S)
(K-N-Q) (W) (W)
Translucent Painted Painted Wood Wood
Color
Price
Perf. Price Price I Price II
White
$2755
$2773
3254
3272
$2755
$2773
3254
3272
$2999
$3032
3407
3440
$2999
$3032
3407
3440
$2575
$2608
3074
3107
$2575
$2608
3074
3107
Patterned
JTHE-6324-
U3
White
Patterned
JTHN-6324-
U3
White
Patterned
JTHH-6324-
U3
White
Patterned
JTHG-6324-
U3
White
Patterned
JTHJ-6324-
U3
White
Patterned
Features
To Order, Specify:
•
•
•
•
•
1) Product number, including:
•
•
JTHH-6324-SU3
Actual
Depth
•
•
•
•
24′′(610mm) storage unit includes one adjustable shelf.
36′′(914mm) unit includes two adjustable shelves.
Optional shelves are available for storage; specify separately.
Translucent doors are non-locking.
Drawers lock together with lock located in right side of lock
fascia.
Optional Dome translucent top adds 2 3/4′′(70mm) to overall
height of unit. Available in white only.
Optional drawer fronts include painted, painted perforated or
wood.
Perforated option (with liner) available on file drawer only.
Personal Storage Towers with translucent doors are standard
with Taper pulls only.
Taper pulls on translucent doors are full-height and match
case trim color.
Towers can be varied in height, in 1′′(25mm) increments from
standard heights between 47.5′′(1207mm) and
73.5′′(1867mm). Contact Haworth Specials for ordering
information.
$2952 $3044
3451
3543
$2952 $3044
3451
3543
$3287 $3387
3695
3795
$3287 $3387
3695
3795
$2759 $2846
3258
3345
$2759 $2846
3258
3345
Painted Drawer Fronts
1 Drawer Front Style:
S Painted
Painted Perforated file drawer front options
K Meteors
N Constellation
Q Galaxy
2 Top Option:
R Regular top
T
Dome translucent top; add $423 list
2) Trim color for drawer fronts and case.*
3) Translucent color for doors.
4) Trim color for lock plug.
Wood Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
W Wood
JTHG-6324-SU3
2 Top Option:
R Regular top
T
Dome translucent top; add $423 list
2) Trim color for case.*
3) Translucent color for doors.
4) Wood finish for drawer fronts.
5) Trim color for lock plug.
*Note: $222 upcharge (list) for drawer fronts/case
Metallic trim color.
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
315
UniGroup Too Price List
X Series Personal Storage Towers with Bookcase
for use with UniGroup Too, UniGroup, PLACES
Actual
Height
Four-High with Bookcase
(Right)
JTBB-5124
51 1/2′′
23′′
24′′
Box/Box/File
(1308mm) (582mm) (610mm) Valet Right
24′′(610mm)
Bookcase
51 1/2′′
23′′
24′′
Box/Box/File
(1308mm) (582mm) (610mm) Valet Left
24′′(610mm)
Bookcase
51 1/2′′
23′′
24′′
File/File
(1308mm) (582mm) (610mm) Valet Right
24′′(610mm)
Bookcase
51 1/2′′
23′′
24′′
File/File
(1308mm) (582mm) (610mm) Valet Left
24′′(610mm)
Bookcase
•
Radius
Linear
•
•
•
•
•
•
•
•
•
Taper
Classic
$2018
$2036
$2516
$2593
2126
1
2108
2129
$2018
2606
2627
$2516
2683
2704
$2593
1
2108
2129
$1874
2606
2627
$2360
2683
2704
$2431
1
1941
1958
$1941
2427
2444
$2427
2498
2515
$2498
2427
2444
2498
2515
2, 3
JTBB-51247, 8, 9 JTBB-51241
JTBE-51242, 3
JTBE-51247, 8, 9 JTBE-51241
JTBG-51242, 3
JTBG-51247, 8, 9 JTBG-51241
JTBJ-5124-
$2036
2126
$1907
1974
$1974
1941
1958
2, 3
JTBJ-51247, 8, 9 JTBJ-5124-
1974
1) Product number, including:
(Left)
JTBJ-5124
Crescent
1
To Order, Specify:
•
Ellipse
JTBB-5124-
•
•
•
•
•
Pull Styles
1
Number 1 2 3
(SS)
(KS-NS-QS) (WW) (WW)
Painted Painted
Wood Wood
Price
Perf. Price Price I Price II
Features
•
2
Actual Actual
Depth Width Description Pull
•
•
•
Bookcase is side access only.
24′′(610mm) bookcase unit includes one adjustable shelf.
Valet locks independently with lock located below pull.
Drawers lock together with lock located in right side of lock
fascia.
Optional translucent top adds 2 3/4′′(70mm) to overall height
of unit.
Optional drawer fronts include painted, painted perforated or
wood.
Perforated option (with liner) available on file drawer. (Not
available on box drawers, valet or with Crescent, Linear and
Classic pulls.)
Crescent, Linear and Classic pulls are available on painted
steel or wood drawer fronts only.
Optional drawer pulls include Ellipse, Radius, Taper,
Crescent, Linear and Classic.
–Ellipse pull available in non-Metallic trim colors only.
–Radius pull available in Metallic trim colors only.
–Taper pull trim color matches case trim color.
–Crescent, Linear and Classic pulls are brushed nickel finish.
Caster option adds 3′′(76mm) to overall height.
Leg option adds 5 1/8′′(130mm) to overall height.
–Legs are color matched to case with black adjustment
extensions.
–Adjustment extensions provide 1 1/2′′(38mm) adjustment
range.
–Field installed.
Caster and leg option limited to unit heights up to
51 1/2′′(1308mm) high.
Towers can be varied in height, in 1′′(25mm) increments from
standard heights between 47.5′′(1207mm) and
73.5′′(1867mm). Contact Haworth Specials for ordering
information.
Leg Option
Leg Option requires modification of the product number.
Add L to the product number and add $176 list.
Example: JTBB-5124-SS1RL
Painted Drawer/Door Fronts
1 Drawer/Door Front Style:
SS Painted
Painted Perforated file drawer front options
KS Meteors
NS Constellation
QS Galaxy
2 Pull (see side bar)
3 Top Option:
R Regular top
T
Translucent top; add $423 list
2) Trim color for drawer/door/case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Trim color for lock plug.
Wood Drawer/Door Fronts
1) Product number, including:
1 Drawer/Door Front Style:
WW Wood
2 Pull (see side bar)
3 Top Option:
R Regular top
T
Translucent top; add $423 list
Caster Option
2) Trim color for case.*
Caster Option requires modification of the product number.
Add C to the product number and add $195 list.
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
Example: JTBB-5124-SS1RC
4) Wood finish for drawer/door fronts.
5) Trim color for lock plug.
*Note: $195 upcharge (list) for drawer/door/
case Metallic trim color.
316
April 2008 / USA
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
X Series Personal Storage Towers with Bookcase
for use with UniGroup Too, UniGroup, PLACES
Five-High with
Bookcase
Upper Storage
Actual
Height
Actual
Depth
Actual
Width
63 1/2′′
(1613mm)
23′′
(582mm)
24′′
(610mm)
63 1/2′′
(1613mm)
63 1/2′′
(1613mm)
63 1/2′′
(1613mm)
(Right)
JTBB-6324
•
Crescent
1
JTBB-6324-
1
$2115
$2133
$2744 $2825
2, 3
7, 8, 9
1
JTBB-6324JTBB-6324JTBE-6324-
2250
1
2232
2226
$2115
2861 2942
2855 2936
$2744 $2825
2, 3
7, 8, 9
1
JTBE-6324JTBE-6324JTBG-6324-
1
2232
2226
$1972
2, 3
7, 8, 9
1
JTBG-6324JTBG-6324JTBJ-6324-
1
2066
2056
$1972
2, 3
7, 8, 9
JTBJ-6324JTBJ-6324-
$2133
2250
$2005
2099
$2005
2066
2056
•
•
•
•
•
Bookcase is side access only.
36′′(914mm) bookcase unit includes two adjustable shelves.
Valet locks independently with lock located below pull.
Drawers lock together with lock located in right side of lock
fascia.
Optional Dome translucent top adds 2 3/4′′(70mm) to overall
height of unit. Available in white only.
Optional drawer fronts include painted, painted perforated
or wood.
Perforated option (with liner) available on file drawer only.
(Not available on box drawers, valet or with Crescent, Linear
and Classic pulls.)
Crescent, Linear and Classic pulls are available on painted
steel or wood drawer fronts only.
Optional drawer pulls include Ellipse, Radius, Taper,
Crescent, Linear and Classic.
–Ellipse pull available in non-Metallic trim colors only.
–Radius pull available in Metallic trim colors only.
–Taper pull trim color matches case trim color.
–Crescent, Linear and Classic pulls are brushed nickel finish.
Towers can be varied in height, in 1′′(25mm) increments from
standard heights between 47.5′′(1207mm) and
73.5′′(1867mm). Contact Haworth Specials for ordering
information.
Available on RUSH.
2861 2942
2855 2936
$2589 $2664
2683 2758
2673 2748
$2589 $2664
2099
1) Product number, including:
•
Ellipse
24′′
(610mm)
Box/Box/File
Valet Right
36′′(914mm)
Bookcase
Box/Box/File
Valet Left
36′′(914mm)
Bookcase
File/File
Valet Right
36′′(914mm)
Bookcase
File/File
Valet Left
36′′(914mm)
Bookcase
To Order, Specify:
•
Pull Styles
23′′
(582mm)
24′′
(610mm)
Number 1 2 3
•
•
•
•
•
2
23′′
(582mm)
24′′
(610mm)
Pull
Features
•
(Left)
JTBJ-6324
23′′
(582mm)
Description
(SS)
(KS-NS-QS) (WW) (WW)
Painted Painted
Wood Wood
Price Perf. Price Price I Price II
2683
2673
2758
2748
Painted Drawer/Door Fronts
1 Drawer/Valet Door Front Style:
SS Painted
Painted Perforated file drawer front options
KS Meteors
NS Constellation
QS Galaxy
2 Pull (see side bar)
3 Top Option:
R Regular top
T
Dome translucent top; add $423 list
2) Trim color for drawer/door/case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Trim color for lock plug.
Wood Drawer/Door Fronts
Radius
1) Product number, including:
Linear
1 Drawer/Door Front Style:
WW Wood
Taper
Classic
2 Pull (see side bar)
3 Top Option:
R Regular top
T
Dome translucent top; add $423 list
2) Trim color for case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Wood finish for drawer/door fronts.
5) Trim color for lock plug.
*Note: $222 upcharge (list) for drawer/door/
case Metallic trim color.
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
317
UniGroup Too Price List
X Series Personal Storage Towers with Bookcase — Translucent Door
for use with UniGroup Too, UniGroup, PLACES
Actual
Height
Five-High with
Bookcase
Upper Storage —
Translucent Door
(Right)
JTBB-6324-SU3
(Left)
JTBJ-6324-SU3
Actual
Depth
Actual
Width
Description
63 1/2′′
23′′
24′′
Box/Box/File
(1613mm) (584mm) (610mm) Valet Right
36′′(914mm)
Bookcase
Box/Box/File
Valet Left
36′′(914mm)
Bookcase
63 1/2′′
23′′
24′′
File/File
(1613mm) (584mm) (610mm) Valet Right
36′′(914mm)
Bookcase
File/File
Valet Left
36′′(914mm)
Bookcase
73 1/2′′
23′′
24′′
Box/Box/File
(1867mm) (1867mm) (610mm) Valet Right
46′′(1168mm)
Bookcase
Box/Box/File
Valet Left
46′′(1168mm)
Bookcase
73 1/2′′
23′′
24′′
File/File
(1867mm) (584mm) (610mm) Valet Right
46′′(1168mm)
Bookcase
File/File
Valet Left
46′′(1168mm)
Bookcase
Number
JTBB-6324-
1
2
U3
(Right)
JTBB-7324-SU3
JTBE-6324-
U3
JTBG-6324-
U3
$2397
$2415
2723
2741
$2397
$2415
2723
2741
$2231
$2264
2557
2590
$2231
$2264
2557
2590
$2730
$2748
3118
3136
$2730
$2748
3118
3136
$2563
$2596
2951
2984
$2563
$2596
2951
2984
White
White
Patterned
JTBJ-6324-
U3
White
Patterned
JTBB-7324-
U3
White
Patterned
JTBE-7324-
U3
White
Patterned
JTBG-7324-
U3
White
Patterned
JTBJ-7324-
U3
White
Patterned
$2605 $2686
2931
3012
$2605 $2686
2931
3012
$2427 $2502
2753
2828
$2427 $2502
2753
2828
$2928 $3019
3316
3407
$2928 $3019
3316
3407
$2748 $2834
3136
3222
$2749 $2834
3137
3222
To Order, Specify (cont’d):
• Bookcase is side access only.
• 36′′(914mm) bookcase unit includes two adjustable shelves.
• 46′′(1168mm) bookcase unit includes three adjustable
shelves.
• Translucent door is non-locking.
• Drawers lock together with lock located in right side of lock
fascia.
• Bookcase, shelves and valet interiors are color matched to
case.
• Optional Dome translucent top adds 2 3/4′′(70mm) to overall
height of unit. Available in white only.
• Optional drawer fronts include painted, painted perforated or
wood.
• Perforated option (with liner) available on file drawer only.
• Personal Storage Towers with translucent doors are standard
with Taper pulls only.
• Taper pulls on translucent doors are full height and match
case trim color.
• Towers can be varied in height, in 1′′(25mm) increments from
standard heights between 47.5′′(1207mm) and
73.5′′(1867mm). Contact Haworth Specials for ordering
information.
Painted Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
S Painted
Painted Perforated file drawer front options
K Meteors
N Constellation
Q Galaxy
(Left)
JTBJ-7324-SU3
April 2008 / USA
White
Patterned
To Order, Specify:
318
(K-N-Q)
(W)
(W)
Painted
Wood Wood
Perf. Price Price I Price II
Patterned
Features
Six-High with
Bookcase
Upper Storage —
Translucent
Door
(S)
Translucent Painted
Color
Price
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
2 Top Option:
R Regular top
T
Dome translucent top; add $423 list
2) Trim color for drawer fronts and case.*
3) Translucent color for doors.
4) Trim color for lock plug.
Wood Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
W Wood
2 Top Option:
R Regular top
T
Dome translucent top; add $423 list
2) Trim color for case.*
3) Translucent color for doors.
4) Wood finish for drawer fronts.
5) Trim color for lock plug.
*Note: $222 upcharge (list) for drawer
fronts/case Metallic trim color.
UniGroup Too Price List
X Series Combination Units — Attached
for use with UniGroup Too, UniGroup, PLACES
Two-High Combination —
Attached
Actual
Height
Actual
Depth
Actual
Width
Description Pull
Number 1 2
(S)
(K-N-Q)
(W)
(W)
Painted Painted
Wood Wood
Price
Perf. Price Price I Price II
27 1/2′′
(699mm)
18 3/4′′
(476mm)
29 7/8′′
(759mm)
File/Box/Box/
Lateral
1
JCPT-0230-
$1197
$1215
$1570
$1619
2, 3
7, 8, 9
1
JCPT-0230JCPT-0230JCPR-0230-
1290
1308
$1197
1308
1663
1681
$1570
1712
1730
$1619
2, 3
7, 8, 9
JCPR-0230JCPR-0230-
1663
1681
1712
1730
27 1/2′′
(699mm)
18 3/4′′
(476mm)
29 7/8′′
(759mm)
Box/Box/File/
Lateral
Features
JCPT-S1A
JCPR-S1A
2
Pull Styles
Radius
Taper
Crescent
Linear
Classic
A
A
1A
A
A
1290
1308
$1215
1308
To Order, Specify:
• Includes attachment hardware and adjustable side-to-side
hanging bars.
• 12′′(305mm) pedestal-style file drawer can accommodate
legal filing side-to-side with the use of legal filing kit,
separately specified.
• Lock plug(s) and key(s) are shipped with random numbering
unless they are specified ��keyed-alike’’ or ��master-keyed.’’
• Optional drawer fronts include painted, painted perforated or
wood.
• Perforated option available on lateral drawer only. (Not
available on file and box drawers.) Liner not included.
• Crescent, Linear and Classic pulls are available on painted
steel or wood drawer fronts only.
• Optional drawer pulls include Ellipse, Radius, Taper,
Crescent, Linear and Classic.
• –Ellipse pull available in non-Metallic trim colors only.
• –Radius pull available in Metallic trim colors only.
• –Taper pull trim color matches case trim color.
• –Crescent, Linear and Classic pulls are brushed nickel finish.
Specification Tips
Ellipse
1A
• Specify lateral and pedestal drawer accessories separately,
as required.
• Specify 12′′(305mm) pedestal-style drawer accessories
separately.
• Attached units must be attached under a worksurface
20′′(508mm) or deeper.
• 18 3/4′′(476mm) deep storage will not work under
18′′(457mm) deep work surfaces.
• Use corner brackets and/or cantilevers to attach the
worksurface to the panel.
• Specify worksurface height adjustment kit if mounting
worksurface up to 2′′(51mm) higher than standard mounting
height; specify separately.
Painted Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
S
Painted
Painted Perforated lateral drawer front options
K Meteors
N Constellation
Q Galaxy
2 Pull (see side bar)
2) Trim color for drawer fronts and case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Trim color for lock plug.
Wood Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
W Wood
2 Pull (see side bar)
2) Trim color for case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Wood finish for drawer fronts.
5) Trim color for lock plug.
*Note: $89 upcharge (list) for drawer fronts/case
Metallic trim color.
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
319
UniGroup Too Price List
X Series Combination Units — Attached
for use with UniGroup Too, UniGroup, PLACES
Actual Actual
Height Depth
Two-High Combination —
Attached
Actual
Width
Description Pull
27 1/2′′
18 3/4′′
29 7/8′′
Box/Box/File/
(699mm) (476mm) (759mm) Door(R)
27 1/2′′
18 3/4′′
29 7/8′′
Door(L)/
(699mm) (476mm) (759mm) Box/Box/File
27 1/2′′
18 3/4′′
29 7/8′′
File/File/
(699mm) (476mm) (759mm) Door(R)
JCPB-S1A (Right)
27 1/2′′
18 3/4′′
29 7/8′′
Door(L)/
(699mm) (476mm) (759mm) File/File
1
Number 1 2
(SS)
(KK-NN-QQ) (WW) (WW)
Painted Painted
Wood Wood
Price
Perf. Price
Price I Price II
JCPB-0230-
$1397
$1433
$1765
$1820
1490
1508
$1397
1526
1858
1876
$1765
1913
1931
$1820
1858
1876
$1717
1913
1931
$1770
1784
1801
$1717
1837
1854
$1770
1784
1801
1837
1854
2, 3
JCPB-02307, 8, 9 JCPB-02301
JCPE-02302, 3
JCPE-02307, 8, 9 JCPE-02301
JCPG-02302, 3
JCPG-02307, 8, 9 JCPG-02301
JCPJ-02302, 3
JCPJ-02307, 8, 9 JCPJ-0230-
Features
JCPG-S1A (Right)
A
A
1A
A
A
1A
A
A
1A
A
A
1490
1508
$1365
1432
1449
$1365
$1433
1526
$1416
1483
$1416
1432
1449
1483
To Order, Specify:
• Includes attachment hardware and adjustable side-to-side
hanging bars.
• 12′′(305mm) pedestal-style file drawer can accommodate
legal filing side-to-side with use of legal filing kit, separately
specified.
• Units with doors include one adjustable shelf.
• Standard with lock centered in front edge of top; locks
drawers and door.
• Lock plug(s) and key(s) are shipped with random numbering
unless they are specified ��keyed-alike’’ or ��master-keyed.’’
• Optional drawer/door fronts include painted, painted
perforated or wood.
• Perforated option (with liner) available on file drawers and
storage door only. (Not available on box drawer.)
• Crescent, Linear and Classic pulls are available on painted
steel or wood drawer fronts only.
• Optional drawer pulls include Ellipse, Radius, Taper,
Crescent,
Linear and Classic.
• –Ellipse pull available in non-Metallic trim colors only.
• –Radius pull available in Metallic trim colors only.
• –Taper pull trim color matches case trim color.
• –Crescent, Linear and Classic pulls are brushed nickel finish.
JCPE-S1A (Left)
1A
Painted Drawer/Door Fronts
1) Product number, including:
1 Drawer/Door Front Style:
SS Painted
Painted Perforated file drawer/door front options
KK Meteors
NN Constellation
QQ Galaxy
2 Pull (see side bar)
2) Trim color for drawer/door/case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Trim color for lock plug.
Wood Drawer/Door Fronts
1) Product number, including:
Specification Tips
JCPJ-S1A (Left)
2
Pull Styles
Ellipse
Crescent
Radius
Linear
Taper
Classic
320
April 2008 / USA
• Specify pedestal drawer accessories separately, as required.
• Specify 12′′(305mm) pedestal-style drawer accessories
separately.
• Attached units must be attached under a worksurface
20′′(508mm) or deeper.
• 18 3/4′′(476mm) deep storage will not work under
18′′(457mm) deep work surfaces.
• Use corner brackets and or cantilevers to attach the
worksurface to the panel.
• Specify worksurface height adjustment kit if mounting
worksurface up to 2′′(51mm) higher than standard mounting
height; specify separately.
1 Drawer/Door Front Style:
WW Wood
2 Pull (see side bar)
2) Trim color for case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Wood finish for drawer/door fronts.
5) Trim color for lock plug.
*Note: $89 upcharge (list) for drawers/
door/case Metallic trim color.
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
X Series Combination Units —Freestanding
for use with UniGroup Too, UniGroup, PLACES
Two-High Combination —
Freestanding
Actual
Height
Actual
Depth
Actual
Width
Description Pull
Number 1 2
(S)
(K-N-Q)
(W)
(W)
Painted Painted
Wood Wood
Price
Perf. Price Price I Price II
27 1/2′′
(699mm)
18 3/4′′
(476mm)
29 7/8′′
(759mm)
File/Box/Box/
Lateral
1
JCPT-0230-
1
$1297
$1315
$1670
$1719
2, 3
7, 8, 9
1
JCPT-0230JCPT-0230JCPR-0230-
1408
1
1390
1408
$1297
1763
1781
$1670
1812
1830
$1719
2, 3
7, 8, 9
JCPR-0230JCPR-0230-
1763
1781
1812
1830
27 1/2′′
(699mm)
JCPR-S1
Pull Styles
Ellipse
29 7/8′′
(759mm)
Box/Box/File/
Lateral
Features
JCPT-S1
2
18 3/4′′
(476mm)
Crescent
Linear
1408
To Order, Specify:
• 12′′(305mm) pedestal-style file drawer can accommodate
legal filing side-to-side with the use of legal filing kit,
separately specified.
• Standard with installed counterweight.
• Optional drawer fronts include painted, painted perforated or
wood.
• Lock plug(s) and key(s) are shipped with random numbering
unless they are specified ��keyed-alike’’ or ��master-keyed.’’
• Perforated option (with liner) available on lateral drawer only.
(Not available on file and box drawers.)
• Crescent, Linear and Classic pulls are available on painted
steel or wood drawer fronts only.
• Optional drawer pulls include Ellipse, Radius, Taper,
Crescent,
Linear and Classic.
• –Ellipse pull available in non-Metallic trim colors only.
• –Radius pull available in Metallic trim colors only.
• –Taper pull trim color matches case trim color.
• –Crescent, Linear and Classic pulls are brushed nickel finish.
Specification Tip
Radius
1390
1408
$1315
• Specify lateral and pedestal drawer accessories separately,
as required.
Painted Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
S
Painted
Painted Perforated lateral and file drawer door
front options
K Meteors
N Constellation
Q Galaxy
2 Pull (see side bar)
2) Trim color for drawer fronts and case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Trim color for lock plug.
Wood Drawer Fronts
1) Product number, including:
Taper
1 Drawer Front Style:
Classic
W Wood
2 Pull (see side bar)
2) Trim color for case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Wood finish for drawer fronts.
5) Trim color for lock plug.
*Note: $89 upcharge (list) for drawer fronts/case
Metallic trim color.
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
321
UniGroup Too Price List
X Series Combination Units —Freestanding
for use with UniGroup Too, UniGroup, PLACES
Actual
Height
Two-High Combination —
Freestanding
Actual
Depth
Actual
Width
Description Pull
27 1/2′′
18 3/4′′
29 7/8′′
Box/Box/File/
(699mm) (476mm) (759mm) Door(R)
Door(L)/
27 1/2′′
18 3/4′′
29 7/8′′
(699mm) (476mm) (759mm) Box/Box/File
27 1/2′′
18 3/4′′
29 7/8′′
File/File/
(699mm) (476mm) (759mm) Door(R)
JCPB-SS1 (Right)
27 1/2′′
18 3/4′′
29 7/8′′
Door(L)/
(699mm) (476mm) (759mm) File/File
1
Number 1 2
(SS)
(KK-NN-QQ) (WW) (WW)
Painted Painted
Wood Wood
Price
Perf. Price
Price I Price II
JCPB-0230-
1
$1397
$1433
$1765
$1820
1526
1
1490
1508
$1397
1858
1876
$1765
1913
1931
$1820
1
1490
1508
$1365
1858
1876
$1717
1913
1931
$1770
1
1432
1449
$1365
1784
1801
$1717
1837
1854
$1770
1784
1801
1837
1854
2, 3
JCPB-02307, 8, 9 JCPB-02301
JCPE-02302, 3
JCPE-02307, 8, 9 JCPE-02301
JCPG-02302, 3
JCPG-02307, 8, 9 JCPG-02301
JCPJ-02302, 3
JCPJ-02307, 8, 9 JCPJ-0230-
Features
JCPG-SS1 (Right)
Specification Tip
JCPJ-SS1 (Left)
• Specify pedestal drawer accessories separately, as required.
2
1526
$1416
1483
$1416
1432
1449
1483
To Order, Specify:
• Door unit includes one adjustable shelf.
• Standard with lock centered in front edge of top; locks
drawers and door.
• Standard with installed counterweight.
• Optional drawer/door fronts include painted, painted
perforated or wood.
• Lock plug(s) and key(s) are shipped with random numbering
unless they are specified ��keyed-alike’’ or ��master-keyed.’’
• Perforated option (with liner) available on file drawers and
storage door only. (Not available on box drawer.)
• 12′′(305mm) pedestal-style file drawer can accommodate
legal filing side-to-side with the use of legal filing kit,
separately specified.
• Crescent, Linear and Classic pulls are available on painted
steel or wood drawer fronts only.
• Optional drawer pulls include Ellipse, Radius, Taper,
Crescent, Linear and Classic.
• –Ellipse pull available in non-Metallic trim colors only.
• –Radius pull available in Metallic trim colors only.
• –Taper pull trim color matches case trim color.
• –Crescent, Linear and Classic pulls are brushed nickel finish.
JCPE-SS1 (Left)
$1433
Painted Drawer/Door Fronts
1) Product number, including:
1 Drawer/Door Front Style:
SS Painted
Painted Perforated file drawer/door front options
KK Meteors
NN Constellation
QQ Galaxy
2 Pull (see side bar)
2) Trim color for drawer/door/case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Trim color for lock plug.
Wood Drawer/Door Fronts
1) Product number, including:
1 Drawer/Door Front Style:
Pull Styles
WW Wood
2 Pull (see side bar)
Ellipse
Radius
2) Trim color for case.*
Crescent
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
Linear
4) Wood finish for drawer/door fronts.
5) Trim color for lock plug.
Taper
322
*Note: $89 upcharge (list) for drawers/door/case
Metallic trim color.
Classic
April 2008 / USA
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
X Series Combination Units —Freestanding
for use with UniGroup Too, UniGroup, PLACES
Actual
Height
Three-High Combination —
Freestanding
Actual
Depth
Actual
Width
39 1/2′′
18 3/4′′
29 7/8′′
(1003mm) (476mm) (759mm)
39 1/2′′
18 3/4′′
35 7/8′′
(1003mm) (476mm) (911mm)
24′′(610mm)High Storage,
One Lateral
24′′(610mm)High Storage,
One Lateral
391/2′′
18 3/4′′
41 7/8′′
24′′(610mm)(1003mm) (476mm) (1064mm) High Storage,
One Lateral
JCPV-SS1
2
Description Pull
1
Number 1 2
(SS)
(KK-NN-QQ) (WW) (WW)
Painted Painted
Wood Wood
Price
Perf. Price
Price I Price II
JCPV-0330-
1
$1221
$1272
$1517
$1564
1339
1
1288
1305
$1322
1584
1601
$1653
1631
1648
$1704
1
1389
1406
$1413
1720
1737
$1773
1771
1788
$1828
1840
1857
1895
1912
2, 3
JCPV-03307, 8, 9 JCPV-03301
JCPV-0336-
2, 3
JCPV-03367, 8, 9 JCPV-03361
JCPV-0342-
2, 3
JCPV-03427, 8, 9 JCPV-0342-
Pull Styles
Features
Ellipse
Radius
Taper
Crescent
Linear
Classic
$1373
1440
$1464
1480
1497
1531
To Order, Specify:
• Door unit includes one adjustable shelf.
• Standard with lock centered in front edge of top; locks
drawer.
• Doors lock separately.
• Lock plug(s) and key(s) are shipped with random numbering
unless they are specified ��keyed-alike’’ or ��master-keyed.’’
• Standard with installed counterweight.
• Optional drawer/door fronts include painted, painted
perforated or wood.
• Perforated option available on file drawer and storage doors
with inner liner. (Lateral drawers do not include liner.)
• Crescent, Linear and Classic pulls are available on painted
steel or wood drawer fronts only.
• Optional drawer pulls include Ellipse, Radius, Taper,
Crescent,
Linear and Classic.
• –Ellipse pull available in non-Metallic trim colors only.
• –Radius pull available in Metallic trim colors only.
• –Taper pull trim color matches case trim color.
• –Crescent, Linear and Classic pulls are brushed nickel finish.
Specification Tip
• Specify lateral drawer accessories separately, as required.
Painted Drawer/Door Fronts
1) Product number, including:
1 Drawer/Door Front Style:
SS Painted
Painted Perforated drawer/door front options
KK Meteors
NN Constellation
QQ Galaxy
2 Pull (see side bar)
2) Trim color for drawer/door/case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Trim color for lock plug.
Wood Drawer/Door Fronts
1) Product number, including:
1 Drawer/Door Front Style:
WW Wood
2 Pull (see side bar)
2) Trim color for case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Wood finish for drawer/door fronts.
5) Trim color for lock plug.
*Note: $117 upcharge (list) for drawers/
door/case Metallic trim color.
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
323
UniGroup Too Price List
X Series Combination Units — Translucent Doors
for use with UniGroup Too, UniGroup, PLACES
Actual
Height
Three-High Combination —
Translucent Doors
Actual Actual
Depth Width Description Number
39 1/2′′
18 3/4′′ 29 7/8′′ 24′′(610mm)(1003mm) (476mm) (759mm) high storage,
one lateral
drawer
JCPV-0330-
(S)
(K-N-Q)
(W)
(W)
Translucent Painted Painted Wood Wood
Color
Price
Perf. Price Price I Price II
1
U3
White
Patterned
Features
JCPV-SU3
$1410
$1428
1694
1712
$1497 $1544
1781
1828
To Order, Specify:
• 36′′(914mm)-high storage unit includes two adjustable
shelves.
• 24′′(610mm)-high storage unit includes one adjustable shelf.
• Combination units with translucent doors are standard with
Taper pulls only.
• Taper pulls on translucent doors are full-height and match
case trim color.
• Lock centered in front edge of top.
• Drawers are locking; doors are non-locking.
• Lock plug(s) and key(s) are shipped with random numbering
unless they are specified ��keyed-alike’’ or ��master-keyed.’’
• Standard with installed counterweight.
• Optional drawer fronts include painted, painted perforated or
wood.
• Painted perforated lateral file drawer front does not include
inner liner.
• Caster option adds 3′′(76mm) to overall height.
• Leg option adds 5 1/8′′(130mm) to overall height.
• –legs are color matched to case with black adjustment
extensions.
• –adjustment extensions provide 1 1/2′′(38mm) adjustment
range.
• –Field installed.
Painted Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
S
Painted
Painted Perforated drawer front options
K Meteors
N Constellation
Q Galaxy
2) Trim color for drawer fronts and case.*
3) Translucent color for doors.
4) Trim color for lock plug.
Wood Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
W Wood
2) Trim color for case.*
Specification Tip
3) Translucent color for doors.
• Specify lateral file accessories separately.
5) Trim color for lock plug.
• Leg option requires modification of the product number. Add
L to the product number and add $166 list.
*Note: Upcharge (list) for drawer fronts/case
Metallic trim color
Three-High = $117.
Four-High = $146.
Example: JCPV-0330-
324
April 2008 / USA
4) Wood finish for drawer fronts.
Leg Option
U3L.
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
X Series Combination Units —Freestanding
for use with UniGroup Too, UniGroup, PLACES
Actual
Height
Four-High Combination —
Freestanding
Actual
Depth
Actual
Width
51 1/2′′
18 3/4′′
29 7/8′′
(1308mm) (476mm) (759mm)
51 1/2′′
18 3/4′′
35 7/8′′
(1308mm) (476mm) (911mm)
Description Pull
36′′(914mm)High Storage,
One Lateral
36′′(914mm)High Storage,
One Lateral
51 1/2′′
18 3/4′′
41 7/8′′
36′′(914mm)(1308mm) (476mm) (1064mm) High Storage,
One Lateral
Pull Styles
Ellipse
Radius
Taper
JCPV-0430-
1
$1376
$1427
$1800
$1853
1494
1
1443
1460
$1489
1867
1884
$1948
1920
1937
$2008
1
1556
1573
$1603
2015
2092
$2102
2075
2032
$2167
2169
2251
2234
2186
2, 3
JCPV-04307, 8, 9 JCPV-04301
JCPV-0436-
2, 3
JCPV-04367, 8, 9 JCPV-04361
JCPV-0442-
2, 3
JCPV-04427, 8, 9 JCPV-0442-
JCPV-SS1
2
1
Number 1 2
(SS)
(KK-NN-QQ) (WW) (WW)
Painted Painted
Wood Wood
Price
Perf. Price
Price I Price II
Crescent
Linear
Classic
Features
$1540
1607
$1654
1670
1687
1721
To Order, Specify:
• Door unit includes two adjustable shelves.
• Standard with lock centered in front edge of top; locks
drawer.
• Doors lock separately.
• Lock plug(s) and key(s) are shipped with random numbering
unless they are specified ��keyed-alike’’ or ��master-keyed.’’
• Standard with installed counterweight.
• Optional drawer/door fronts include painted, painted
perforated or wood.
• Painted perforated lateral file drawer front does not include
inner liner.
• Perforated option available on file drawer and storage doors.
• Crescent, Linear and Classic pulls are available on
painted steel or wood drawer fronts only.
• Optional drawer pulls include Ellipse, Radius, Taper,
Crescent,
Linear and Classic.
• –Ellipse pull available in non-Metallic trim colors only.
• –Radius pull available in Metallic trim colors only.
• –Taper pull trim color matches case trim color.
• –Crescent, Linear and Classic pulls are brushed nickel finish.
Specification Tip
• Specify lateral file accessories separately.
Painted Drawer/Door Fronts
1) Product number, including:
1 Drawer/Door Front Style:
SS Painted
Painted Perforated drawer/door front options
KK Meteors
NN Constellation
QQ Galaxy
2 Pull (see side bar)
2) Trim color for drawer/door/case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Trim color for lock plug.
Wood Drawer/Door Fronts
1) Product number, including:
1 Drawer/Door Front Style:
WW Wood
2 Pull (see side bar)
2) Trim color for case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Wood finish for drawer/door fronts.
5) Trim color for lock plug.
*Note: $146 upcharge (list) for drawers/
door/case Metallic trim color.
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
325
UniGroup Too Price List
X Series Combination Units —Freestanding
for use with UniGroup Too, UniGroup, PLACES
Actual
Height
Four-High Combination —
Freestanding
Actual
Depth
Actual
Width
51 1/2′′
18 3/4′′
29 7/8′′
(1308mm) (476mm) (759mm)
51 1/2′′
18 3/4′′
35 7/8′′
(1308mm) (476mm) (962mm)
Description Pull
24′′(610mm)High Storage,
Two Laterals
24′′(610mm)High Storage,
Two Laterals
51 1/2′′
18 3/4′′
41 7/8′′
24′′(610mm)(1308mm) (476mm) (1064mm) High Storage,
Two Laterals
Pull Styles
Ellipse
Radius
Taper
JCPY-0430-
1
$1404
$1470
$1752
$1806
1560
1
1494
1515
$1517
1842
1863
$1925
1896
1917
$1984
1
1607
1628
$1631
2015
2036
$2082
2074
2095
$2146
2172
2193
2236
2257
2, 3
JCPY-04307, 8, 9 JCPY-04301
JCPY-0436-
2, 3
JCPY-04367, 8, 9 JCPY-04361
JCPY-0442-
2, 3
JCPY-04427, 8, 9 JCPY-0442-
JCPY-SS1
2
1
Number 1 2
(SS)
(KK-NN-QQ) (WW) (WW)
Painted Painted
Wood Wood
Price
Perf. Price
Price I Price II
Crescent
Linear
Classic
Features
$1583
1673
$1697
1721
1742
1787
To Order, Specify:
• Door unit includes one adjustable shelf.
• Standard with lock centered in front edge of top; locks
drawers.
• Doors lock separately.
• Lock plug(s) and key(s) are shipped with random numbering
unless they are specified ��keyed-alike’’ or
��master-keyed.’’
• Counterweight option recommended if files are not ganged
together or anchored to a fixed object; specify separately.
• Optional drawer/door fronts include painted, painted
perforated or wood.
• Painted perforated lateral file drawer front does not include
inner liner.
• Perforated option available on drawers and storage doors
• Crescent, Linear and Classic pulls are available on painted
steel or wood drawer fronts only.
• Optional drawer pulls include Ellipse, Radius, Taper,
Crescent,
Linear and Classic.
• –Ellipse pull available in non-Metallic trim colors only.
• –Radius pull available in Metallic trim colors only.
• –Taper pull trim color matches case trim color.
• –Crescent, Linear and Classic pulls are brushed nickel finish.
Painted Drawer/Door Fronts
1) Product number, including:
1 Drawer/Door Front Style:
SS Painted
Painted Perforated drawer/door front options
KK Meteors
NN Constellation
QQ Galaxy
2 Pull (see side bar)
2) Trim color for drawer/door/case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Trim color for lock plug.
Wood Drawer/Door Fronts
1) Product number, including:
Specification Tip
• Specify lateral file accessories separately.
1 Drawer/Door Front Style:
WW Wood
2 Pull (see side bar)
2) Trim color for case.*
3) Trim color for pull (Ellipse and Radius only).
• –Ellipse (Non-Metallic trim colors only)
• –Radius (Metallic trim colors only; upcharge for
Metallic trim on pull is included in price.)
4) Wood finish for drawer/door fronts.
5) Trim color for lock plug.
*Note: $146 upcharge (list) for drawers/
door/case Metallic trim color.
326
April 2008 / USA
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
X Series Combination Units — Translucent Doors
for use with UniGroup Too, UniGroup, PLACES
Actual
Height
Four-High Combination —
Translucent Doors
Actual Actual
Depth Width Description Number
(S)
(K-N-Q)
(W)
(W)
Translucent Painted Painted Wood Wood
Color
Price
Perf. Price Price I Price II
1
51 1/2′′
18 3/4′′ 29 7/8′′ 36′′(914mm)(1308mm) (476mm) (759mm) high storage,
lateral one
drawer
JCPV-0430-
U3
White
$1649
$1667
$1730 $1783
51 1/2′′
18 3/4′′ 29 7/8′′ 24′′(610mm)(1308mm) (476mm) (759mm) high storage,
two lateral
drawers
JCPY-0430-
U3
Patterned
White
2075
$1616
2093
$1649
2156 2209
$1755 $1809
Patterned
1900
1933
Features
JCPV-SU3
JCPY-SU3
2039
2093
To Order, Specify:
• 36′′(914mm)-high storage unit includes two adjustable
shelves.
• 24′′(610mm)-high storage unit includes one adjustable shelf.
• Combination units with translucent doors are standard with
Taper pulls only.
• Taper pulls on translucent doors are full-height and match
case trim color.
• Lock centered in front edge of top.
• Drawers are locking; doors are non-locking.
• Lock plug(s) and key(s) are shipped with random numbering
unless they are specified ��keyed-alike’’ or ��master-keyed.’’
• Standard with installed counterweight.
• Optional drawer fronts include painted, painted perforated or
wood.
• Painted perforated lateral file drawer front does not include
inner liner.
• Caster option adds 3′′(76mm) to overall height.
• Leg option adds 5 1/8′′(130mm) to overall height.
• –legs are color matched to case with black adjustment
extensions.
• –adjustment extensions provide 1 1/2′′(38mm) adjustment
range.
• –Field installed.
Painted Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
S
Painted
Painted Perforated drawer front options
K Meteors
N Constellation
Q Galaxy
2) Trim color for drawer fronts and case.*
3) Translucent color for doors.
4) Trim color for lock plug.
Wood Drawer Fronts
1) Product number, including:
1 Drawer Front Style:
W Wood
2) Trim color for case.*
Specification Tip
3) Translucent color for doors.
• Specify lateral file accessories separately.
4) Wood finish for drawer fronts.
Leg Option
5) Trim color for lock plug.
• Leg option requires modification of the product number. Add
L to the product number and add $166 list.
*Note: Upcharge (list) for drawer fronts/case
Metallic trim color
Three-High = $117.
Four-High = $146.
Example: JCPV-0430-
U3L.
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
327
UniGroup Too Price List
X Series Combination Unit Accessories
for use with UniGroup Too, UniGroup, PLACES
Worksurface Height
Adjustment Kit for
Attached Combination Unit
Height
Number
Price
1-2′′(25-51mm)
JSHA-1
$23
Features
To Order, Specify:
• Includes eight height adjustment spacers and attachment
hardware.
• Provides height adjustment for file-supported worksurfaces.
• Raises worksurfaces in 1′′(25mm) increments up to
2′′(51mm) above standard worksurface height.
• Standard in charcoal finish color only.
1) Product number.
(No finish specification required.)
JSHA-1
Storage Shelf
Unit Width
Shelf Width
Shelf Depth
Shelf Thickness
Number
Price
30′′(762mm)
13 3/4′′(349mm)
16 1/2′′(419mm)
5/8′′(16mm)
JSSA-15
$39
Feature
To Order, Specify:
• Includes shelf and clips.
1) Product number.
Specification Tip
2) Trim color.*
• To be used with 2-high combination unit with storage door
only.
*Note: $7 upcharge (list) for Metallic trim color.
JSSA-15
Storage Shelves
Unit Width
Shelf Width
Shelf Depth
Shelf Thickness
Number
Price
30′′(762mm)
36′′(914mm)
42′′(1067mm)
28 1/4′′(718mm)
34 1/4′′(870mm)
40 1/4′′(1022mm)
16 1/2′′(419mm)
5/8′′(16mm)
JSSA-30
JSSA-36
JSSA-42
$48
51
55
Feature
To Order, Specify:
• Includes one storage shelf and clips.
1) Product number.
2) Trim color.*
*Note: $10 upcharge (list) for Metallic trim color.
JSSA
328
April 2008 / USA
Class FP – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
X Series Bookcases
for use with UniGroup Too, UniGroup, PLACES
Two-High Bookcase
Actual
Height
Actual
Depth
Actual
Width
Number
Price
27 1/2′′(699mm)
14′′(356mm)
29 7/8′′(759mm)
35 7/8′′(911mm)
41 7/8′′(1064mm)
JBCS-0230
JBCS-0236
JBCS-0242
$514
542
624
Feature
To Order, Specify:
• Includes one adjustable shelf.
1) Product number.
Available on RUSH.
JBCS-0230
JBCS-0236
JBCS-0242
2) Trim color for case and shelves.*
Leg Option
Leg option is available on 30′′-wide units and requires
modification of the product number. Add L to the product
number and add $169 list.
*Note: Upcharge (list) for Metallic trim color
Two-High = $89.
Example: JBCS-0230-L
Three-High Bookcase
JBCS-0330
JBCS-0336
JBCS-0342
39 1/2′′(1003mm)
14′′(356mm)
29 7/8′′(759mm)
35 7/8′′(911mm)
41 7/8′′(1064mm)
JBCS-0330
JBCS-0336
JBCS-0342
$546
599
664
Feature
To Order, Specify:
• Includes two adjustable shelves.
1) Product number.
Leg Option
2) Trim color for case and shelves.*
Leg option is available on 30′′-wide units and requires
modification of the product number. Add L to the product
number and add $169 list.
*Note: Upcharge (list) for Metallic trim color
Three-High = $117.
Example: JBCS-0230-L
Class FM – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
329
UniGroup Too Price List
X Series Bookcases
for use with UniGroup Too, UniGroup, PLACES
Four-High Bookcase
Actual
Height
Actual
Depth
Actual
Width
Number
Price
51 1/2′′(1308mm)
14′′(356mm)
29 7/8′′(759mm)
35 7/8′′(911mm)
41 7/8′′(1064mm)
JBCS-0430
JBCS-0436
JBCS-0442
$625
674
762
Feature
To Order, Specify:
• Includes three adjustable shelves.
1) Product number.
Available on RUSH.
2) Trim color for case and shelves.*
Leg Option
Leg option is available on 30′′-wide units and requires
modification of the product number. Add L to the product
number and add $169 list.
*Note: Upcharge (list) for Metallic trim color
Four-High = $146.
Example: JBCS-0430-L
JBCS-0430
JBCS-0436
JBCS-0442
Five-High Bookcase
63 1/2′′(1613mm)
14′′(356mm)
29 7/8′′(759mm)
35 7/8′′(911mm)
41 7/8′′(1064mm)
JBCS-0530
JBCS-0536
JBCS-0542
Feature
To Order, Specify:
• Includes four adjustable shelves.
1) Product number.
$711
763
867
2) Trim color for case and shelves.*
*Note: Upcharge (list) for Metallic trim color
Five-High = $174.
JBCS-0530
JBCS-0536
JBCS-0542
Bookcase Shelf
Unit Width
Shelf Depth
Shelf Thickness
Number
Price
29 7/8′′(759mm)
35 7/8′′(911mm)
41 7/8′′(1064mm)
13 1/4′′(337mm)
5/8′′(16mm)
JBSA-30
JBSA-36
JBSA-42
$46
49
53
Feature
To Order, Specify:
• Includes shelf and clips.
1) Product number.
Available on RUSH.
Specification Tips
• Bookcase shelf to be used in X Series bookcase only.
JBSA
330
April 2008 / USA
Class FM – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Trim color.*
*Note: $8 upcharge (list) for Metallic trim color.
UniGroup Too Price List
V Series Attached and Suspended Pedestals
for use with UniGroup Too, UniGroup, PLACES
Box/Box/File – Attached
Actual
Height
Actual
Depth
Actual
Width
Description
Number
Price
27 1/2′′(699mm)
17′′(432mm)
23′′(584mm)
29′′(737mm)
17′′(432mm)
23′′(584mm)
29′′(737mm)
15′′(381mm)
Box/Box/File
15′′(381mm)
File/File
VPAH-18
VPAH-24
VPAH-30
VPAJ-18
VPAJ-24
VPAJ-30
$380
403
444
$358
377
415
27 1/2′′(699mm)
VPAH-24
File/File– Attached
Features
To Order, Specify:
•
•
•
•
1) Product number.
Includes attachment hardware.
See appropriate price list for specification requirements.
Glides provide 1 1/2′′(38mm) adjustment range.
Attached units must be attached under a worksurface
equal to or deeper than pedestal depth.
• Lock plug(s) and key(s) are shipped with random numbering
unless they are specified ��keyed-alike’’ or ��master-keyed.’’
• File drawer can accommodate legal filing front to back with
the use of legal filing kits (VPL1-12, VPL2-12), separately
specified.
• Usable drawer is less than actual drawer depth.
2) Trim color for drawer fronts and case.*
3) Trim color for pull (non-metallic colors only).
4) Trim color for lock plug.
*Note: $36 upcharge (list) for Metallic trim color.
Available on RUSH.
VPAJ-24
Specification Tips
• Specify pedestal drawer accessories separately, as required.
• Specify worksurface height adjustment kit if mounting
worksurface up to 2′′(51mm) higher than standard mounting
height; specify separately.
• Use corner brackets and/or cantilevers to attach the
worksurface to the panel.
Box/File – Suspended
19 5/8′′(498mm)
25 5/8′′(651mm)
25 5/8′′(651mm)
VPHA-24
Box/Box/File– Suspended
17′′(432mm)
23′′(584mm)
17′′(432mm)
23′′(584mm)
17′′(432mm)
23′′(584mm)
15′′(381mm)
Box/File
15′′(381mm)
Box/Box/File
15′′(381mm)
File/File
VPHA-18
VPHA-24
VPHH-18
VPHH-24
VPHJ-18
VPHJ-24
Features
To Order, Specify:
• Includes attachment hardware.
• Lock plug(s) and key(s) are shipped with random numbering
unless they are specified ��keyed-alike’’ or ��master-keyed.’’
• File drawer can accommodate legal filing front to back with
the use of legal filing kits (VPL1-12, VPL2-12), separately
specified.
• Usable drawer is less than actual drawer depth.
1) Product number.
$310
332
$374
393
$352
366
2) Trim color for drawer fronts and case.*
3) Trim color for pull (non-metallic colors only).
4) Trim color for lock plug.
*Note: $36 upcharge (list) for Metallic trim color.
Available on RUSH.
Specification Tips
VPHH-24
File/File– Suspended
• Specify pedestal drawer accessories separately, as required.
• Suspended units must be suspended under a worksurface
equal to or deeper than pedestal depth.
• Suspended pedestals can only be used with UniGroup
Too, UniGroup, PLACES, and RACE systems
applications.
VPHJ-24
Class VS – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
331
UniGroup Too Price List
V Series Mobile Pedestals
for use with UniGroup Too, UniGroup, PLACES
Box/File– Mobile
Actual
Height
Actual
Depth
Actual
Width
Description
Number
Price
21 1/2′′(546mm)
17′′(432mm)
23′′(584mm)
17′′(432mm)
23′′(584mm)
29′′(737mm)
17′′(432mm)
23′′(584mm)
29′′(737m)
15′′(381mm)
Box/File
15′′(381mm)
Box/Box/File
15′′(381mm)
File/File
VPMA-18
VPMA-24
VPMH-18
VPMH-24
VPMH-30
VPMJ-18
VPMJ-24
VPMJ-30
$384
411
$473
496
547
$445
464
512
27 1/2′′(699mm)
27 1/2′′(699mm)
VPMA-24
Box/Box/File– Mobile
Features
To Order, Specify:
• Casters: black, non-locking, 2 swivel (rear), 2 fixed (front).
• Lock plug(s) and key(s) are shipped with random numbering
unless they are specified ��keyed-alike’’ or ��master-keyed.’’
• File drawer can accommodate legal filing front to back with
the user of legal filing kits (VPL1-12, VPL2-12), separately
specified.
1) Product number.
Available on RUSH.
VPMH-24
2) Trim color for drawer fronts and case.
3) Trim color for pull (non-metallic colors only).
4) Trim color for lock plug.
*Note: $36 upcharge (list) for Metallic trim color.
Specification Tip
• Specify pedestal drawer accessories separately as required.
File/File– Mobile
VPMJ-24
Legal Filing Kits
Description
Number
Price
Compressor, inner hanging bar
12′′ STS file conversion bars
VPL1-12
VPL2-12
$61
31
Features
To Order, Specify:
• For filing legal 12′′(305mm) pedestal drawers.
• Designed to be used in V Series 23′′(584mm) and
29′′(737mm) deep pedestals only.
1) Product number.
(No finish specification required.)
VPL1-12
VPL2-12
332
April 2008 / USA
Class VS – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
V Series Lateral Files — Attached
for use with UniGroup Too, UniGroup, PLACES
Two-High — Attached
VLRD-0230-A
Actual
Height
Actual
Depth
Actual
Width
Number
Price
27 1/2′′(699mm)
18′′(457mm)
29 7/8′′(759mm)
35 7/8′′(911mm)
41 7/8′′(1064mm)
VLRD-0230-A
VLRD-0236-A
VLRD-0242-A
$607
711
789
Features
To Order, Specify:
• Includes attachment hardware and adjustable side-to-side
hanging bars.
• See appropriate price book for specification requirements.
• Drawer interiors and accessories are black.
• Specify worksurface height adjustment kit if mounting
worksurface up to 2′′(51mm) higher than standard mounting
height; specify separately.
• Lock plug(s) and key(s) are shipped with random numbering
unless they are specified ��keyed-alike’’ or ��master-keyed.’’
1) Product number.
2) Trim color for drawer fronts and case.*
3) Trim color for pull (non-metallic colors only).
4) Trim color for lock plug.
*Note: $58 upcharge (list) for drawer fronts/case
metallic trim color.
Available on RUSH.
Specification Tip
• Use corner brackets and/or cantilevers to attach the
worksurface to the panel.
Class VS – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
333
UniGroup Too Price List
V Series Lateral Files — Freestanding
for use with UniGroup Too, UniGroup, PLACES
Two-High — Freestanding
VLRD-0230
Actual
Height
Actual
Depth
Actual
Width
Number
Price
27 1/2′′(699mm)
18′′(457mm)
29 7/8′′(759mm)
35 7/8′′(911mm)
41 7/8′′(1064mm)
VLRD-0230
VLRD-0236
VLRD-0242
$707
821
930
Features
To Order, Specify:
• Includes adjustable side-to-side hanging bars.
• Two-high freestanding files are standard with installed
counterweight.
• Lock plug(s) and key(s) are shipped with random numbering
unless they are specified ��keyed-alike’’ or ��master-keyed.’’
• Drawer interiors and accessories are black.
1) Product number.
39 1/2′′(1003mm)
18′′(457mm)
4) Trim color for lock plug.
29 7/8′′(759mm)
35 7/8′′(911mm)
41 7/8′′(1064mm)
VLRD-0330
VLRD-0336
VLRD-0342
Features
To Order, Specify:
• Includes adjustable side-to-side hanging bars.
• Counterweight option recommended if files are not ganged
together or anchored to a fixed object; specify separately.
• Lock plug(s) and key(s) are shipped with random numbering
unless they are specified ��keyed-alike’’ or ��master-keyed.’’
• Drawer interiors and accessories are black.
1) Product number.
51 1/2′′(1308mm)
$ 783
905
1036
2) Trim color for drawer fronts and case.
3) Trim color for pull (non-metallic colors only).
4) Trim color for lock plug.
*Note: $77 upcharge (list) for drawer fronts/case
with Metallic trim color.
Available on RUSH.
VLRD-0330
Four-High — Freestanding
3) Trim color for pull (non-metallic colors only).
*Note: $58 upcharge (list) for drawer fronts/case
with Metallic trim color.
Available on RUSH.
Three-High — Freestanding
2) Trim color for drawer fronts and case.
18′′(457mm)
29 7/8′′(759mm)
35 7/8′′(911mm)
41 7/8′′(1064mm)
VLRD-0430
VLRD-0436
VLRD-0442
Features
To Order, Specify:
• Includes adjustable side-to-side hanging bars.
• Counterweight option recommended if files are not ganged
together or anchored to a fixed object; specify separately.
• Lock plug(s) and key(s) are shipped with random numbering
unless they are specified ��keyed-alike’’ or ��master-keyed.’’
• Drawer interiors and accessories are black.
1) Product number.
$ 992
1174
1343
2) Trim color for drawer fronts and case.
3) Trim color for pull (non-metallic colors only).
4) Trim color for lock plug.
*Note: $97 upcharge (list) for drawer fronts/case
with Metallic trim color.
Available on RUSH.
VLRD-0430
Five-High — Freestanding
63 1/2′′(1613mm)
18′′(457mm)
29 7/8′′(759mm)
35 7/8′′(911mm)
41 7/8′′(1064mm)
Features
To Order, Specify:
• Includes adjustable side-to-side hanging bars.
• Counterweight option recommended if files are not ganged
together or anchored to a fixed object; specify separately.
• Lock plug(s) and key(s) are shipped with random numbering
unless they are specified ��keyed-alike’’ or ��master-keyed.’’
• Drawer interiors and accessories are black.
1) Product number.
Available on RUSH.
VLRD-0530
334
April 2008 / USA
VLRD-0530
VLRD-0536
VLRD-0542
Class VS – SIN 711-3; Discount Group XII
Canadian Conversion Factor: Refer to haworth.com/Canada
$1190
1397
1604
2) Trim color for drawer fronts and case.
3) Trim color for pull (non-metallic colors only).
4) Trim color for lock plug.
*Note: $117 upcharge (list) for drawer fronts/case
with Metallic trim color.
UniGroup Too Price List
950 Series Pedestal Dimensions
for use with UniGroup Too, UniGroup, PLACES
General Information
• Steel pedestals can be specified with PLACES,
UniGroupВ®, RACEВ® and PLACES steel casegoods.
• Pedestals are available in standard PLACES,
UniGroup, and RACE finish colors and custom
color finishes. Pedestals cases are available in
monochromatic finishes only.
• Pedestal drawer fronts available in monochromatic
finishes or wood.
• Wood drawer fronts have recessed, vertical side
drawer pulls.
• Available with standard pull or full pull option.
• All steel pedestal models are available either locking
or non-locking and can be field retrofitted.
• Reference shelf option is available on all pedestals.
• Conversion kits are available to convert a pedestal
from one type to another (e.g. suspended to
mobile).
• Pedestals with full-extension 6′′(152mm) drawers
are available.
Steel Pedestal Body Heights,
Width, and Depths
19′′
(483mm)
22′′
(559mm)
25′′
(635mm)
19 5/8′′
(499mm)
All Pedestals are 15 3/8′′(391mm) wide.
22 7/8′′
(581mm)
28 7/8′′(733mm)
(Fixed, Mobile and
Stationary only)
Steel Pedestal
Component Heights
Suspended
Attached
Mobile
Freestanding
1/2′′(13mm)
Top
1/2′′(13mm)
Top
19′′(483mm),
22′′(559mm),
25′′(635mm)
Overall
25′′(635mm)
Case
27 7/8′′
(733mm)
Overall
24 3/4′′
(629mm),
27 3/4′′
(705mm)
Overall
2 7/8′′(73mm)
Base
Pull Options
Integral Pull
Pedestal Drawer Filing
Capacities — Lineal Inches
22′′(559mm),
25′′(635mm)
Case
22′′(559mm),
25′′(635mm)
Case
24 7/8′′(632mm),
27 7/8′′(708mm)
Overall
23/8′′(60mm)
Base
2 1/4′′(57mm)
Caster
Full Pull
Full Pull Side View
Pedestal Depths
Paper Size
Filing Format
20′′(508mm)
24′′(610mm)
30′′(762mm)
Letter or A4 size
front-to-back
15 5/8′′(397mm)
with compressor
18 7/8′′(479mm)
with compressor
24 7/8′′(632mm)
with compressor
Letter or A4 size
side-to-side
12 5/8′′(321mm)
12 5/8′′(321mm)
25 1/4′′(641mm) (two rows)
12 5/8′′(321mm) (one row)
12 3/4′′(324mm) (one row)
front-to-back (remaining)
3 1/2′′(89mm)
6 3/4′′(171mm)
Legal or Foolscap size
side-to-side
12 5/8′′(321mm)
12 5/8′′(321mm)
12 5/8′′(321mm)
Letter or A4 size
front-to-back (remaining)
—
3 3/4′′(95mm)
9 3/4′′(248mm)
• Compressor serves as suspension rail for side-to-side filing.
April 2008 / USA
335
UniGroup Too Price List
950 Series Suspended Pedestals — Wood Front
for use with UniGroup Too, UniGroup, PLACES
Suspended Pedestal —
Box/File — Wood Front
Height
Depth
Width
Description
Number
Wood
Price I
Wood
Price II
19′′(483mm)
19′′(483mm)
20′′(508mm)
24′′(610mm)
15 3/8′′(391mm)
15 3/8′′(391mm)
With lock
DPWS-20-ALN
DPWS-24-ALN
$703
731
$725
753
Features
To Order, Specify:
• Includes one (1) side-to-side 6′′(152mm) drawer divider, one
(1) pencil tray, one (1) file compressor, and attachment
hardware.
• 6′′/12′′(152mm/305mm) drawer stack.
• Drawer interiors are black.
• Suspended units must be attached under a worksurface
equal to or deeper than pedestal depth.
1) Product number.
2) Drawer front wood finish color.
3) Case trim color.
Specification Tips
DPWS-A
• See appropriate price book for specification requirements.
• Use corner brackets and/or cantilevers to attach the
worksurface to the panel.
• Suspended pedestals can only be used with RACE,
UniGroup, UniGroup Too, and PLACES systems applications.
Suspended Pedestal —
Box/Box/Box — Wood Front
19′′(483mm)
19′′(483mm)
20′′(508mm)
24′′(610mm)
15 3/8′′(391mm)
15 3/8′′(391mm)
With lock
DPWS-20-BLN
DPWS-24-BLN
Features
To Order, Specify:
• Includes three (3) side-to-side 6′′(152mm) drawer dividers,
one (1) pencil tray, and attachment hardware.
• 6′′/6′′/6′′(152mm/152mm/152mm) drawer stack.
• Drawer interiors are black.
• Suspended units must be attached under a worksurface
equal to or deeper than pedestal depth.
1) Product number.
$861
889
$883
911
2) Drawer front wood finish color.
3) Case trim color.
Specification Tips
DPWS-B
• See appropriate price book for specification requirements.
• Use corner brackets and/or cantilevers to attach the
worksurface to the panel.
• Suspended pedestals can only be used with RACE,
UniGroup, UniGroup Too, and PLACES systems applications.
Suspended Pedestal —
Pencil/Box/File — Wood Front
22′′(559mm)
22′′(559mm)
15 3/8′′(391mm)
15 3/8′′(391mm)
With lock
To Order, Specify:
• Includes one (1) pencil tray, one (1) side-to-side 6′′(152mm)
drawer divider, one (1) file compressor, and attachment
hardware.
• 3′′/6′′/12′′(76mm/152mm/305mm) drawer stack.
• Drawer interiors are black.
• Suspended units must be attached under a worksurface
equal to or deeper than pedestal depth.
1) Product number.
• See appropriate price book for specification requirements.
• Use corner brackets and/or cantilevers to attach the
worksurface to the panel.
• Suspended pedestals can only be used with RACE,
UniGroup, UniGroup Too, and PLACES systems applications.
April 2008 / USA
DPWS-20-DLN
DPWS-24-DLN
Features
Specification Tips
DPWS-D
336
20′′(508mm)
24′′(610mm)
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
$893
921
2) Drawer front wood finish color.
3) Case trim color.
$916
944
UniGroup Too Price List
950 Series Suspended Pedestals — Wood Front
for use with UniGroup Too, UniGroup, PLACES
Suspended Pedestal —
Box/Box/File — Wood Front
Height
Depth
Width
Description
Number
Wood
Price I
Wood
Price II
25′′(635mm)
25′′(635mm)
20′′(508mm)
24′′(610mm)
15 3/8′′(391mm)
15 3/8′′(391mm)
With lock
DPWS-20-HLN
DPWS-24-HLN
$932
960
$953
981
Features
To Order, Specify:
• Includes two (2) side-to-side 6′′(152mm) drawer dividers, one
(1) pencil tray, one (1) file compressor, and attachment
hardware.
• 6′′/6′′/12′′(152mm/152mm/305mm) drawer stack.
• Drawer interiors are black.
• Suspended units must be attached under a worksurface
equal to or deeper than pedestal depth.
1) Product number.
2) Drawer front wood finish color.
3) Case trim color.
Specification Tips
DPWS-H
• See appropriate price book for specification requirements.
• Use corner brackets and/or cantilevers to attach the
worksurface to the panel.
• Suspended pedestals can only be used with RACE,
UniGroup, UniGroup Too, and PLACES systems applications.
Suspended Pedestal —
File/File — Wood Front
25′′(635mm)
25′′(635mm)
20′′(508mm)
24′′(610mm)
15 3/8′′(391mm)
15 3/8′′(391mm)
With lock
DPWS-20-JLN
DPWS-24-JLN
Features
To Order, Specify:
•
•
•
•
1) Product number.
Includes two (2) file compressors, and attachment hardware.
12′′/12′′(305mm/305mm) drawer stack.
Drawer interiors are black.
Suspended units must be attached under a worksurface
equal to or deeper than pedestal depth.
$834
862
$856
884
2) Drawer front wood finish color.
3) Case trim color.
Specification Tips
DPWS-J
• See appropriate price book for specification requirements.
• Use corner brackets and/or cantilevers to attach the
worksurface to the panel.
• Suspended pedestals can only be used with RACE,
UniGroup, UniGroup Too, and PLACES systems applications.
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
337
UniGroup Too Price List
950 Series Attached Pedestals — Systems Application — Wood Front
for use with UniGroup Too, UniGroup, PLACES
Attached Pedestal —
Box/Box/File — Wood Front
Height
Depth
Width
Description
Number
Wood
Price I
Wood
Price II
27 7/8′′(708mm)
20′′(508mm)
24′′(610mm)
30′′(762mm)
15 3/8′′(391mm)
With lock
DPWX-20-HLN
DPWX-24-HLN
DPWX-30-HLN
$1135
1171
1218
$1157
1194
1241
Features
To Order, Specify:
• Includes two (2) side-to-side 6′′(152mm) drawer dividers, one
(1) pencil tray, and one (1) file compressor.
• 6′′/6′′/12′′(152mm/152mm/305mm) drawer stack.
• Drawer interiors are black.
• Attached units must be attached under a worksurface
equal to or deeper than pedestal depth.
1) Product number.
2) Drawer front wood finish color.
3) Case trim color.
Specification Tip
• To be used in systems applications, not recommended for
placement within PLACES Too casegoods.
DPWX-H
Attached Pedestal —
File/File — Wood Front
27 7/8′′(708mm)
20′′(508mm)
24′′(610mm)
30′′(762mm)
15 3/8′′(391mm)
With lock
Features
To Order, Specify:
•
•
•
•
1) Product number.
Includes two (2) file compressors.
12′′/12′′(305mm/305mm) drawer stack.
Drawer interiors are black.
Attached units must be attached under a worksurface
equal to or deeper than pedestal depth.
Specification Tip
• To be used in systems applications, not recommended for
placement within PLACES Too casegoods.
DPWX-J
338
April 2008 / USA
DPWX-20-JLN
DPWX-24-JLN
DPWX-30-JLN
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
$1009
1028
1075
2) Drawer front wood finish color.
3) Case trim color.
$1034
1052
1099
UniGroup Too Price List
950 Series Mobile Pedestals — Wood Top/Front
for use with UniGroup Too, UniGroup, PLACES
Mobile Pedestal —
Pencil/Box/File — Wood Top
and Front
Height
Depth
Width
Description
Number
Wood
Price I
Wood
Price II
24 3/4′′(629mm)
20′′(508mm)
24′′(610mm)
30′′(762mm)
15 3/8′′(391mm)
With lock
DPWM-20-DLN
DPWM-24-DLN
DPWM-30-DLN
$1255
1275
1319
$1279
1299
1343
Features
To Order, Specify:
• Includes one (1) side-to-side 6′′(152mm) drawer divider, one
(1) pencil tray, and one (1) file compressor and four (4) dual
wheel, full pivot casters.
• 3′′/6′′/12′′(76mm/152mm/305mm) drawer stack.
• Drawer interiors are black.
1) Product number.
2) Drawer front/top wood finish color.
3) Case trim color.
DPWM-D
Mobile Pedestal —
Box/Box/File — Wood Top
and Front
27 3/4′′(705mm)
20′′(508mm)
24′′(610mm)
30′′(762mm)
15 3/8′′(391mm)
With lock
DPWM-20-HLN
DPWM-24-HLN
DPWM-30-HLN
Features
To Order, Specify:
• Includes two (2) side-to-side 6′′(152mm) drawer dividers, one
(1) pencil tray, and one (1) file compressor and four (4) dual
wheel, full pivot casters.
• 6′′/6′′/12′′(152mm/152mm/305mm) drawer stack.
• Drawer interiors are black.
1) Product number.
$1293
1317
1361
$1319
1339
1383
2) Drawer front/top wood finish color.
3) Case trim color.
DPWM-H
Mobile Pedestal —
File/File — Wood Top and
Front
27 3/4′′(705mm)
20′′(508mm)
24′′(610mm)
30′′(762mm)
15 3/8′′(391mm)
With lock
DPWM-20-JLN
DPWM-24-JLN
DPWM-30-JLN
Features
To Order, Specify:
• Includes two (2) file compressors and four (4) dual wheel, full
pivot casters.
• 12′′/12′′(305mm/305mm) drawer stack.
• Drawer interiors are black.
1) Product number.
$1156
1190
1234
$1181
1214
1258
2) Drawer front/top wood finish color.
3) Case trim color.
DPWM-J
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
339
UniGroup Too Price List
950 Series Freestanding Pedestals — Wood Top/Front
for use with UniGroup Too, UniGroup, PLACES
Freestanding Pedestal —
Pencil/Box/File — Wood Top
and Front
Height
Depth
Width
Description
Number
Wood
Price I
Wood
Price II
24 7/8′′(632mm)
20′′(508mm)
24′′(610mm)
30′′(762mm)
15 3/8′′(391mm)
With lock
DPWF-20-DLN
DPWF-24-DLN
DPWF-30-DLN
$1137
1164
1206
$1159
1186
1228
Features
To Order, Specify:
• Includes one (1) side-to-side 6′′(152mm) drawer divider, one
(1) pencil tray, and one (1) file compressor.
• 3′′/6′′/12′′(76mm/152mm/305mm) drawer stack.
• Drawer interiors are black.
1) Product number.
2) Drawer front/top wood finish color.
3) Case trim color.
DPWF-D
Freestanding Pedestal —
Box/Box/File — Wood Top
and Front
27 7/8′′(708mm)
20′′(508mm)
24′′(610mm)
30′′(762mm)
15 3/8′′(391mm)
With lock
DPWF-20-HLN
DPWF-24-HLN
DPWF-30-HLN
Features
To Order, Specify:
• Includes two (2) side-to-side 6′′(152mm) drawer dividers, one
(1) pencil tray, and one (1) file compressor.
• 6′′/6′′/12′′(152mm/152mm/305mm) drawer stack.
• Drawer interiors are black.
1) Product number.
$1176
1203
1245
$1197
1224
1266
2) Drawer front/top wood finish color.
3) Case trim color.
DPWF-H
Freestanding Pedestal —
File/File — Wood Top and
Front
27 7/8′′(708mm)
20′′(508mm)
24′′(610mm)
30′′(762mm)
15 3/8′′(391mm)
With lock
DPWF-20-JLN
DPWF-24-JLN
DPWF-30-JLN
Features
To Order, Specify:
• Includes two (2) file compressors.
• 12′′/12′′(305mm/305mm) drawer stack.
• Drawer interiors are black.
1) Product number.
2) Drawer front/top wood finish color.
3) Case trim color.
DPWF-J
340
April 2008 / USA
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
$1063
1090
1132
$1079
1106
1148
UniGroup Too Price List
950 Series Pedestal Conversion Kits
for use with UniGroup Too, UniGroup, PLACES
Description
Freestanding Base Conversion For 20′′(508mm)-deep drawers
Kit
For 24′′(610mm)-deep drawers
For 30′′(762mm)-deep drawers
Number
Price
PCKS-20
PCKS-24
PCKS-30
$119
119
119
Features
To Order, Specify:
• Includes base, four (4) glides, and attachment hardware.
• Converts mobile unit to freestanding.
• Adds 2 3/8′′(60mm) to pedestal height.
1) Product number.
2) Trim color.
Note: $23 upcharge (list) for Metallic trim color.
Specification Tip
• Only use on 950 Series pedestals.
PCKS
Counterweight
Height
Depth
Width
Number
Price
21′′(533mm)-24′′(610mm)
3/16′′(5mm)
12 5/8′′(321mm)
PCWW-10
$139
Features
To Order, Specify:
• Use with 21′′(533mm)-24′′(610mm) high pedestals.
• 25-pound counterweight.
• Shipped separately for field installation.
1) Product number.
(No finish specification required.)
Available on RUSH.
Specification Tip
• Comes standard with all mobile and stationary pedestals.
PCWW-10
Heavy Loading Counterweight
PCWW-15
1 5/8′′(41mm)
7 5/8′′(194mm)
14 1/2′′(368mm)
Features
To Order, Specify:
• Use with mobile or freestanding pedestals for heavier load
bearing capacity above that provided by standard
counterweight.
• The 32-pound counterweight is used in addition to the
counterweight that is standard in all mobile units.
• Universal for any depth mobile or freestanding pedestal.
• Shipped separately for field installation.
1) Product number.
(No finish specification required.)
Mobile Caster Kit
PMCC-2
PCWW-15
PMCC-2
$334
$52
Features
To Order, Specify:
• Includes four (4) casters (two swivel and two non-swivel) and
attachment hardware.
• Converts freestanding unit to mobile.
• Standard in black finish only.
1) Product number.
(No finish specification required.)
Available on RUSH.
Specification Tip
• Only use on 950 Series pedestals.
Note: Part numbers are for pedestals with 3014 and 487
date stamps. Refer to eParts price list for pedestals
with date stamp 262.
• The date stamp can be found on the underside of the top
drawer.
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
341
UniGroup Too Price List
950 Series Suspended Pedestals
for use with UniGroup Too, UniGroup, PLACES
Suspended Pedestal —
Box/File
PDS-A
Height
Depth
Width
Description
Number
Price
19′′(483mm)
20′′(508mm)
15 3/8′′(391mm)
19′′(483mm)
24′′(610mm)
15 3/8′′(391mm)
With lock
With lock/reference shelf
With lock
With lock/reference shelf
PDS-20-ALN
PDS-20-ALE
PDS-24-ALN
PDS-24-ALE
$504
600
$542
638
Features
To Order, Specify:
• Includes one (1) side-to-side 6′′(152mm) drawer divider, one
(1) pencil tray, one (1) file compressor, and attachment
hardware.
• 6′′/12′′(152mm/305mm) drawer stack.
• Drawer interiors are black.
• Available without lock, see below.
• Attached units must be attached under a worksurface
equal to or deeper than pedestal depth.
1) Product number.
2) Trim color.
Full Pull Option:
Specify full pull option (if desired) by adding X as
the 9th digit.
Note: $56 upcharge (list) for Metallic trim color.
Available on RUSH.
Specification Tips
• See appropriate price book for specification requirements.
• Use corner brackets and/or cantilevers to attach the
worksurface to the panel.
• Suspended pedestals can only be used with RACE,
UniGroup, UniGroup Too, and PLACES systems applications.
Suspended Pedestal
—Box/Box/Box
PDS-B
19′′(483mm)
20′′(508mm)
15 3/8′′(391mm)
19′′(483mm)
24′′(610mm)
15 3/8′′(391mm)
With lock
With lock/reference shelf
With lock
With lock/reference shelf
Features
To Order, Specify:
• Includes three (3) side-to-side 6′′(152mm) drawer dividers,
one (1) pencil tray, and attachment hardware.
• 6′′/6′′/6′′(152mm/152mm/152mm) drawer stack.
• Drawer interiors are black.
• Available without lock, see below.
• Attached units must be attached under a worksurface
equal to or deeper than pedestal depth.
1) Product number.
Specification Tips
• See appropriate price book for specification requirements.
• Use corner brackets and/or cantilevers to attach the
worksurface to the panel.
• Suspended pedestals can only be used with RACE,
UniGroup, UniGroup Too, and PLACES systems applications.
Without Lock Option
Suspended pedestal without lock requires modification of the
product number and list price. Change the L in the product number
to an N and deduct $21 list.
Example: PDS-20-BNN=Box/Box/Box pedestal without lock.
342
April 2008 / USA
PDS-20-BLN
PDS-20-BLE
PDS-24-BLN
PDS-24-BLE
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
$633
729
$671
767
2) Trim color.
Full Pull Option:
Specify full pull option (if desired) by adding X as
the 9th digit.
Note: $56 upcharge (list) for Metallic trim color.
UniGroup Too Price List
950 Series Suspended Pedestals
for use with UniGroup Too, UniGroup, PLACES
Suspended Pedestal
—Pencil/Box/File
PDS-D
Height
Depth
Width
Description
Number
Price
22′′(559mm)
20′′(508mm)
15 3/8′′(391mm)
22′′(559mm)
24′′(610mm)
15 3/8′′(391mm)
With lock
With lock/reference shelf
With lock
With lock/reference shelf
PDS-20-DLN
PDS-20-DLE
PDS-24-DLN
PDS-24-DLE
$663
759
$701
797
Features
To Order, Specify:
• Includes one (1) pencil tray, one (1) side-to-side 6′′(152mm)
drawer divider, and one (1) file compressor, and attachment
hardware.
• 3′′/6′′/12′′(76mm/152mm/305mm) drawer stack.
• Drawer interiors are black.
• Available without lock, see below.
• Attached units must be attached under a worksurface
equal to or deeper than pedestal depth.
1) Product number.
2) Trim color.
Full Pull Option:
Specify full pull option (if desired) by adding X as
the 9th digit.
Note: $56 upcharge (list) for Metallic trim color.
Specification Tips
• See appropriate price book for specification requirements.
• Use corner brackets and/or cantilevers to attach the
worksurface to the panel.
• Suspended pedestals can only be used with RACE,
UniGroup, UniGroup Too, and PLACES systems applications.
Suspended Pedestal
—Pencil/Pencil/Box/File
PDS-G
25′′(635mm)
20′′(508mm)
15 3/8′′(391mm)
25′′(635mm)
24′′(610mm)
15 3/8′′(391mm)
With lock
With lock/reference shelf
With lock
With lock/reference shelf
PDS-20-GLN
PDS-20-GLE
PDS-24-GLN
PDS-24-GLE
Features
To Order, Specify:
• Includes one (1) pencil tray, one (1) side-to-side 6′′(152mm)
drawer divider, and one (1) file compressor, and attachment
hardware.
• 3′′/3′′/6′′/12′′(76mm/76mm/152mm/305mm) drawer stack.
• Drawer interiors are black.
• Available without lock, see below.
• Attached units must be attached under a worksurface
equal to or deeper than pedestal depth.
1) Product number.
$821
917
$859
955
2) Trim color.
Full Pull Option:
Specify full pull option (if desired) by adding X as
the 9th digit.
Note: $56 upcharge (list) for Metallic trim color.
Specification Tips
• See appropriate price book for specification requirements.
• Use corner brackets and/or cantilevers to attach the
worksurface to the panel.
• Suspended pedestals can only be used with RACE,
UniGroup, UniGroup Too, and PLACES systems applications.
Without Lock Option
Suspended pedestal without lock requires modification of the
product number and list price. Change the L in the product number
to an N and deduct $21 list.
Example: PDS-20-GNN=Pencil/Pencil/Box/File pedestal without
lock.
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
343
UniGroup Too Price List
950 Series Suspended Pedestals
for use with UniGroup Too, UniGroup, PLACES
Suspended Pedestal
—Box/Box/File
PDS-H
Height
Depth
Width
Description
Number
Price
25′′(635mm)
20′′(508mm)
15 3/8′′(391mm)
25′′(635mm)
24′′(610mm)
15 3/8′′(391mm)
With lock
With lock/reference shelf
With lock
With lock/reference shelf
PDS-20-HLN
PDS-20-HLE
PDS-24-HLN
PDS-24-HLE
$698
794
$736
832
Features
To Order, Specify:
• Includes two (2) side-to-side 6′′(152mm) drawer dividers, one
(1) pencil tray, and one (1) file compressor, and attachment
hardware.
• 6′′/6′′/12′′(152/152mm/305mm) drawer stack.
• Drawer interiors are black.
• Available without lock, see below.
• Attached units must be attached under a worksurface
equal to or deeper than pedestal depth.
1) Product number.
2) Trim color.
Full Pull Option:
Specify full pull option (if desired) by adding X as
the 9th digit.
Note: $56 upcharge (list) for Metallic trim color.
Specification Tips
• See appropriate price book for specification requirements.
• Use corner brackets and/or cantilevers to attach the
worksurface to the panel.
• Suspended pedestals can only be used with RACE,
UniGroup, UniGroup Too, and PLACES systems applications.
Suspended Pedestal —
File/File
25′′(635mm)
20′′(508mm)
15 3/8′′(391mm)
25′′(635mm)
24′′(610mm)
15 3/8′′(391mm)
With lock
With lock/reference shelf
With lock
With lock/reference shelf
Features
To Order, Specify:
•
•
•
•
•
1) Product number.
Includes two (2) file compressors and attachment hardware.
12′′/12′′(305mm/305mm) drawer stack.
Drawer interiors are black.
Available without lock, see below.
Attached units must be attached under a worksurface
equal to or deeper than pedestal depth.
Specification Tips
PDS-J
• See appropriate price book for specification requirements.
• Use corner brackets and/or cantilevers to attach the
worksurface to the panel.
• Suspended pedestals can only be used with RACE,
UniGroup, UniGroup Too, and PLACES systems applications.
Without Lock Option
Suspended pedestal without lock requires modification of the
product number and list price. Change the L in the product number
to an N and deduct $21 list.
Example: PDS-20-HNN=Box/Box/File pedestal without lock.
344
April 2008 / USA
PDS-20-JLN
PDS-20-JLE
PDS-24-JLN
PDS-24-JLE
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
$569
665
$607
703
2) Trim color.
Full Pull Option:
Specify full pull option (if desired) by adding X as
the 9th digit.
Note: $56 upcharge (list) for Metallic trim color.
UniGroup Too Price List
950 Series Suspended Pedestals
for use with UniGroup Too, UniGroup, PLACES
Suspended Pedestal
—Pencil/Box/EDP
PDS-K
Height
Depth
Width
Description
Number
Price
25′′(635mm)
20′′(508mm)
15 3/8′′(391mm)
25′′(635mm)
24′′(610mm)
15 3/8′′(391mm)
With lock
With lock/reference shelf
With lock
With lock/reference shelf
PDS-20-KLN
PDS-20-KLE
PDS-24-KLN
PDS-24-KLE
$730
826
$768
864
Features
To Order, Specify:
• Includes one (1) pencil tray, one (1) side-to-side 6′′(152mm)
drawer divider, and one (1) file compressor and attachment
hardware.
• 3′′/6′′/15′′(76mm/152mm/381mm) drawer stack.
• Drawer interiors are black.
• Available without lock, see below.
• Attached units must be attached under a worksurface
equal to or deeper than pedestal depth.
1) Product number.
2) Trim color.
Full Pull Option:
Specify full pull option (if desired) by adding X as
the 9th digit.
Note: $58 upcharge (list) for Metallic trim color.
Specification Tips
• See appropriate price book for specification requirements.
• Use corner brackets and/or cantilevers to attach the
worksurface to the panel.
• Suspended pedestals can only be used with RACE,
UniGroup, UniGroup, UniGroup Too, and PLACES systems
applications.
Without Lock Option
Suspended pedestal without lock requires modification of the
product number and list price. Change the L in the product number
to an N and deduct $21 list.
Example: PDS-20-KNN=Pencil/Box/EDP pedestal without lock.
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
345
UniGroup Too Price List
950 Series Attached Pedestals — Systems Application
for use with UniGroup Too, UniGroup, PLACES
Attached Pedestal —
Pencil/Pencil/Box/File
PDX-G
Height
Depth
Width
Description
Number
Price
27 7/8′′(708mm)
20′′(508mm)
15 3/8′′(391mm)
27 7/8′′(708mm)
24′′(610mm)
15 3/8′′(391mm)
27 7/8′′(708mm)
30′′(762mm)
15 3/8′′(391mm)
With lock
With lock reference shelf
With lock
With lock/reference shelf
With lock
With lock/reference shelf
PDX-20-GLN
PDX-20-GLE
PDX-24-GLN
PDX-24-GLE
PDX-30-GLN
PDX-30-GLE
$ 996
1097
$1026
1127
$1070
1171
Features
To Order, Specify:
• Includes one (1) pencil tray, one (1) side-to-side 6′′(152mm)
drawer divider, one (1) file compressor, and attachment
hardware.
• 3′′/3′′/6′′/12′′(76mm/76mm/152mm/305mm) drawer stack.
• Attached pedestals include four glides with a height
adjustment of 1′′(25mm).
• Drawer interiors are black.
• Available without lock, see below.
• Attached units must be attached under a worksurface
equal to or deeper than pedestal depth.
1) Product number.
2) Trim color.
Full Pull Option:
Specify full pull option (if desired) by adding X as
the 9th digit.
Note: $58 upcharge (list) for Metallic trim color.
Specification Tips
• See appropriate price book for specification requirements.
• Use corner brackets and/or cantilevers to attach the
worksurface to the panel.
• Suspended pedestals can only be used with RACE,
UniGroup, UniGroup Too, and PLACES systems applications.
• To be used in system applications, not recommended for
placement within PLACES Too Casegoods.
Attached Pedestal —
Box/Box/File
PDX-H
27 7/8′′(708mm)
20′′(508mm)
15 3/8′′(391mm)
27 7/8′′(708mm)
24′′(610mm)
15 3/8′′(391mm)
27 7/8′′(708mm)
30′′(762mm)
15 3/8′′(391mm)
With lock
With lock/reference shelf
With lock
With lock/reference shelf
With lock
With lock/reference shelf
Features
To Order, Specify:
• Includes two (2) side-to-side 6′′(152mm) drawer dividers, one
(1) pencil tray, one (1) file compressor, and attachment
hardware.
• 6′′/6′′/12′′(152mm/152mm/305mm) drawer stack.
• Attached pedestals include four glides with a height
adjustment of 1′′(25mm).
• Drawer interiors are black.
• Available without lock, see below.
• Attached units must be attached under a worksurface
equal to or deeper than pedestal depth.
1) Product number.
Specification Tips
• See appropriate price book for specification requirements.
• Use corner brackets and/or cantilevers to attach the
worksurface to the panel.
• Suspended pedestals can only be used with RACE,
UniGroup, UniGroup Too, and PLACES systems applications.
• To be used in system applications, not recommended for
placement within PLACES Too Casegoods.
Without Lock Option
Suspended pedestal without lock requires modification of the
product number and list price. Change the L in the product number
to an N and deduct $21 list.
Example: PDX-20-GNN=Pencil/Pencil/Box/File pedestal without lock.
346
April 2008 / USA
PDX-20-HLN
PDX-20-HLE
PDX-24-HLN
PDX-24-HLE
PDX-30-HLN
PDX-30-HLE
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
$ 859
960
$ 889
990
$ 933
1034
2) Trim color.
Full Pull Option:
Specify full pull option (if desired) by adding X as
the 9th digit.
Note: $58 upcharge (list) for Metallic trim color.
UniGroup Too Price List
950 Series Attached Pedestals — Systems Application
for use with UniGroup Too, UniGroup, PLACES
Attached Pedestal
—Box/Box/Box/Box
PDX-I
Height
Depth
Width
Description
Number
Price
27 7/8′′(708mm)
20′′(508mm)
15 3/8′′(391mm)
27 7/8′′(708mm)
24′′(610mm)
15 3/8′′(391mm)
27 7/8′′(708mm)
30′′(762mm)
15 3/8′′(391mm)
With lock
With lock/reference shelf
With lock
With lock/reference shelf
With lock
With lock/reference shelf
PDX-20-ILN
PDX-20-ILE
PDX-24-ILN
PDX-24-ILE
PDX-30-ILN
PDX-30-ILE
$ 999
1100
$1029
1130
$1073
1174
Features
To Order, Specify:
• Includes four (4) side-to-side 6′′(152mm) drawer dividers, one
(1) pencil tray, and attachment hardware.
• 6′′/6′′/6′′/6′′(152mm/152mm/152mm/152mm) drawer stack.
• Drawer interiors are black.
• Attached pedestals include four glides with a height
adjustment of 1′′(25mm).
• Available without lock, see below.
• Fixed pedestals are not counterweighted, and must be
attached to underside of a systems worksurface or casegood
top.
1) Product number.
2) Trim color.
Full Pull Option:
Specify full pull option (if desired) by adding X as
the 9th digit.
Note: $58 upcharge (list) for Metallic trim color.
Specification Tips
• See appropriate price book for specification requirements.
• Use corner brackets and/or cantilevers to attach the
worksurface to the panel.
• Suspended pedestals can only be used with RACE,
UniGroup, UniGroup Too, and PLACES systems applications.
• To be used in system applications, not recommended for
placement within PLACES Too Casegoods.
Attached Drawer Pedestal —
File/File
PDX-J
27 7/8′′(708mm)
20′′(508mm)
15 3/8′′(391mm)
27 7/8′′(708mm)
24′′(610mm)
15 3/8′′(391mm)
27 7/8′′(708mm)
30′′(762mm)
15 3/8′′(391mm)
With lock
With lock/reference shelf
With lock
With lock/reference shelf
With lock
With lock/reference shelf
PDX-20-JLN
PDX-20-JLE
PDX-24-JLN
PDX-24-JLE
PDX-30-JLN
PDX-30-JLE
Features
To Order, Specify:
• Includes two (2) file compressors, and attachment hardware.
• 12′′/12′′(305mm/305mm) drawer stack.
• Attached pedestals include four glides with a height
adjustment of 1′′(25mm).
• Drawer interiors are black.
• Available without lock, see below.
• Attached units must be attached under a worksurface
equal to or deeper than pedestal depth.
1) Product number.
$717
818
$747
848
$791
892
2) Trim color.
Full Pull Option:
Specify full pull option (if desired) by adding X as
the 9th digit.
Note: $57 upcharge (list) for Metallic trim color.
Specification Tips
• See appropriate price book for specification requirements.
• Use corner brackets and/or cantilevers to attach the
worksurface to the panel.
• Suspended pedestals can only be used with RACE,
UniGroup, UniGroup Too, and PLACES systems applications.
• To be used in system applications, not recommended for
placement within PLACES Too Casegoods.
Without Lock Option
Attached pedestal without lock requires modification of the
product number and list price. Change the L in the product
number to an N and deduct $21 list.
Example: PDX-20-JNN=File/File pedestal without lock.
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
347
UniGroup Too Price List
950 Series Attached Pedestals — Systems Application
for use with UniGroup Too, UniGroup, PLACES
Attached Drawer Pedestal —
Pencil/Box/EDP
PDX-K
Height
Depth
Width
Description
Number
Price
27 7/8′′(708mm)
20′′(508mm)
15 3/8′′(391mm)
27 7/8′′(708mm)
24′′(610mm)
15 3/8′′(391mm)
27 7/8′′(708mm)
30′′(762mm)
15 3/8′′(391mm)
With lock
With lock/reference shelf
With lock
With lock/reference shelf
With lock
With lock/reference shelf
PDX-20-KLN
PDX-20-KLE
PDX-24-KLN
PDX-24-KLE
PDX-30-KLN
PDX-30-KLE
$ 893
994
$ 923
1024
$ 967
1068
Features
To Order, Specify:
• Includes one (1) pencil tray, one (1) side-to-side 6′′(152mm)
drawer divider, one (1) file compressor, and attachment
hardware.
• 3′′/6′′/15′′(76mm/152mm/381mm) drawer stack.
• Attached pedestals include four glides with a height
adjustment of 1′′(25mm).
• Drawer interiors are black.
• Available without lock, see below.
• Attached units must be attached under a worksurface
equal to or deeper than pedestal depth.
1) Product number.
Specification Tips
• See appropriate price book for specification requirements.
• Use corner brackets and/or cantilevers to attach the
worksurface to the panel.
• Suspended pedestals can only be used with RACE,
UniGroup, UniGroup Too, and PLACES systems applications.
• To be used in system applications, not recommended for
placement within PLACES Too Casegoods.
Without Lock Option
Attached pedestal without lock requires modification of the product
number and list price. Change the L in the product number to an N
and deduct $21 list.
Example: PDX-20-KNN=Pencil/Box/EDP pedestal without lock.
348
April 2008 / USA
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Trim color.
Full Pull Option:
Specify full pull option (if desired) by adding X as
the 9th digit.
Note: $57 upcharge (list) for Metallic trim color.
UniGroup Too Price List
950 Series Mobile Pedestals
for use with UniGroup Too, UniGroup, PLACES
Mobile Pedestal —
Pencil/Box/File
PDM-D
Height
Depth
Width
Description
Number
Price
24 3/4′′(629mm)
20′′(508mm)
15 3/8′′(391mm)
24 3/4′′(629mm)
24′′(610mm)
15 3/8′′(391mm)
24 3/4′′(629mm)
30′′(762mm)
15 3/8′′(391mm)
With lock
With lock/reference shelf
With lock
With lock/reference shelf
With lock
With lock/reference shelf
PDM-20-DLN
PDM-20-DLE
PDM-24-DLN
PDM-24-DLE
PDM-30-DLN
PDM-30-DLE
$1092
1204
$1122
1234
$1171
1283
Features
To Order, Specify:
• Includes one (1) pencil tray, one (1) side-to-side 6′′(152mm)
drawer divider, and one (1) file compressor.
• 3′′/6′′/12′′(76mm/152mm/305mm) drawer stack.
• Drawer interiors are black.
• Mobile drawers include four (4) dual wheel casters—two
swivel and two non-swivel.
• Available without lock, see below.
1) Product number.
2) Trim color.
Full Pull Option:
Specify full pull option (if desired) by adding X as
the 9th digit.
Note: $58 upcharge (list) for Metallic trim color.
Mobile Pedestal —
Pencil/Pencil/Box/File
PDM-G
27 3/4′′(705mm)
20′′(508mm)
15 3/8′′(391mm)
27 3/4′′(705mm)
24′′(610mm)
15 3/8′′(391mm)
27 3/4′′(705mm)
30′′(762mm)
15 3/8′′(391mm)
With lock
With lock/reference shelf
With lock
With lock/reference shelf
With lock
With lock/reference shelf
PDM-20-GLN
PDM-20-GLE
PDM-24-GLN
PDM-24-GLE
PDM-30-GLN
PDM-30-GLE
Features
To Order, Specify:
• Includes one (1) pencil tray, one (1) side-to-side 6′′(152mm)
drawer divider, and one (1) file compressor.
• 3′′/3′′/6′′/12′′(76mm/76mm/152mm/305mm) drawer stack.
• Drawer interiors are black.
• Mobile drawers include four (4) dual wheel casters—two
swivel and two non-swivel.
• Available without lock, see below.
1) Product number.
$1270
1382
$1300
1412
$1349
1461
2) Trim color.
Full Pull Option:
Specify full pull option (if desired) by adding X as
the 9th digit.
Note: $58 upcharge (list) for Metallic trim color.
Mobile Pedestal —
Box/Box/File
PDM-H
27 3/4′′(705mm)
20′′(508mm)
15 3/8′′(391mm)
27 3/4′′(705mm)
24′′(610mm)
15 3/8′′(391mm)
27 3/4′′(705mm)
30′′(762mm)
15 3/8′′(391mm)
With lock
With lock/reference shelf
With lock
With lock/reference shelf
With lock
With lock/reference shelf
PDM-20-HLN
PDM-20-HLE
PDM-24-HLN
PDM-24-HLE
PDM-30-HLN
PDM-30-HLE
Features
To Order, Specify:
• Includes two (2) side-to-side 6′′(152mm) drawer dividers, one
(1) pencil tray, and one (1) file compressor.
• 6′′/6′′/12′′(152mm/152mm/305mm) drawer stack.
• Drawer interiors are black.
• Mobile drawers include four (4) dual wheel casters—two
swivel and two non-swivel.
• Available without lock, see below.
1) Product number.
$1133
1245
$1163
1275
$1212
1324
2) Trim color.
Full Pull Option:
Specify full pull option (if desired) by adding X as
the 9th digit.
Note: $58 upcharge (list) for Metallic trim color.
Without Lock Option
Mobile pedestal without lock requires modification of the product
number and list price. Change the L in the product number to an N
and deduct $21 list.
Example: PDM-20-HNN=Box/Box/File pedestal without lock.
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
349
UniGroup Too Price List
950 Series Mobile Pedestals
for use with UniGroup Too, UniGroup, PLACES
Mobile Pedestal —
File/File
PDM-J
Height
Depth
Width
Description
Number
Price
27 3/4′′(705mm)
20′′(508mm)
15 3/8′′(391mm)
27 3/4′′(705mm)
24′′(610mm)
15 3/8′′(391mm)
27 3/4′′(705mm)
30′′(762mm)
15 3/8′′(391mm)
With lock
With lock/reference shelf
With lock
With lock/reference shelf
With lock
With lock/reference shelf
PDM-20-JLN
PDM-20-JLE
PDM-24-JLN
PDM-24-JLE
PDM-30-JLN
PDM-30-JLE
$ 987
1099
$1017
1129
$1066
1178
Features
To Order, Specify:
•
•
•
•
•
1) Product number.
Includes two (2) file compressors.
12′′/12′′(305mm/305mm) drawer stack.
Drawer interiors are black.
Available without lock, see below.
Mobile drawers include four (4) dual wheel casters—two
swivel and two non-swivel.
2) Trim color.
Full Pull Option:
Specify full pull option (if desired) by adding X as
the 9th digit.
Note: $58 upcharge (list) for Metallic trim color.
Mobile Pedestal —
Pencil/Box/EDP
PDM-K
27 3/4′′(705mm)
20′′(508mm)
15 3/8′′(391mm)
27 3/4′′(705mm)
24′′(610mm)
15 3/8′′(391mm)
27 3/4′′(705mm)
30′′(762mm)
15 3/8′′(391mm)
With lock
With lock/reference shelf
With lock
With lock/reference shelf
With lock
With lock/reference shelf
PDM-20-KLN
PDM-20-KLE
PDM-24-KLN
PDM-24-KLE
PDM-30-KLN
PDM-30-KLE
Features
To Order, Specify:
• Includes one (1) pencil tray, one (1) side-to-side 6′′(152mm)
drawer divider, and one (1) file compressor.
• 3′′/6′′/15′′(76mm/152mm/381mm) drawer stack.
• Drawer interiors are black.
• Mobile drawers include four (4) dual wheel casters—two
swivel and two non-swivel.
• Available without lock, see below.
1) Product number.
$1168
1280
$1198
1310
$1247
1359
2) Trim color.
Full Pull Option:
Specify full pull option (if desired) by adding X as
the 9th digit.
Note: $58 upcharge (list) for Metallic trim color.
Without Lock Option
Mobile pedestal without lock requires modification of the product
number and list price. Change the L in the product number to an N
and deduct $21 list.
Example: PDM-20-JNN=File/File pedestal without lock.
350
April 2008 / USA
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
950 Series Freestanding Pedestals
for use with UniGroup Too, UniGroup, PLACES
Freestanding Pedestal—
Pencil/Box/File
PDF-D
Height
Depth
Width
Description
Number
Price
24 7/8′′(632mm)
20′′(508mm)
15 3/8′′(391mm)
24 7/8′′(632mm)
24′′(610mm)
15 3/8′′(391mm)
24 7/8′′(632mm)
30′′(762mm)
15 3/8′′(391mm)
With lock
With lock/reference shelf
With lock
With lock/reference shelf
With lock
With lock/reference shelf
PDF-20-DLN
PDF-20-DLE
PDF-24-DLN
PDF-24-DLE
PDF-30-DLN
PDF-30-DLE
$ 917
1011
$ 944
1038
$ 983
1077
Features
To Order, Specify:
• Includes one (1) pencil tray, one (1) side-to-side 6′′(152mm)
drawer divider, and one (1) file compressor.
• 3′′/6′′/12′′(76mm/152mm/305mm) drawer stack.
• Freestanding pedestals include four glides with a height
adjustment of 1′′(25mm).
• Drawer interiors are black.
• Available without lock, see below.
1) Product number.
2) Trim color.
Full Pull Option:
Specify full pull option (if desired) by adding X as
the 9th digit.
Note: $58 upcharge (list) for Metallic trim color.
Freestanding Pedestal —
Pencil/Pencil/Box/File
PDF-G
27 7/8′′(708mm)
20′′(508mm)
15 3/8′′(391mm)
27 7/8′′(708mm)
24′′(610mm)
15 3/8′′(391mm)
27 7/8′′(708mm)
30′′(762mm)
15 3/8′′(391mm)
With lock
With lock/reference shelf
With lock
With lock/reference shelf
With lock
With lock/reference shelf
PDF-20-GLN
PDF-20-GLE
PDF-24-GLN
PDF-24-GLE
PDF-30-GLN
PDF-30-GLE
Features
To Order, Specify:
• Includes one (1) pencil tray, one (1) side-to-side 6′′(152mm)
drawer divider, and one (1) file compressor.
• 3′′/3′′/6′′/12′′(76mm/76mm/152mm/305mm) drawer stack.
• Freestanding pedestals include four glides with a height
adjustment of 1′′(25mm).
• Drawer interiors are black.
• Available without lock, see below.
1) Product number.
$1066
1160
$1093
1187
$1132
1226
2) Trim color.
Full Pull Option:
Specify full pull option (if desired) by adding X as
the 9th digit.
Note: $58 upcharge (list) for Metallic trim color.
Freestanding Pedestal —
Box/Box/File
PDF-H
27 7/8′′(708mm)
20′′(508mm)
15 3/8′′(391mm)
27 7/8′′(708mm)
24′′(610mm)
15 3/8′′(391mm)
27 7/8′′(708mm)
30′′(762mm)
15 3/8′′(391mm)
With lock
With lock/reference shelf
With lock
With lock/reference shelf
With lock
With lock/reference shelf
PDF-20-HLN
PDF-20-HLE
PDF-24-HLN
PDF-24-HLE
PDF-30-HLN
PDF-30-HLE
Features
To Order, Specify:
• Includes two (2) side-to-side 6′′(152mm) drawer dividers, one
(1) pencil tray, and one (1) file compressor.
• 6′′/6′′/12′′(152mm/152mm/305mm) drawer stack.
• Freestanding pedestals include four glides with a height
adjustment of 1′′(25mm).
• Drawer interiors are black.
• Available without lock, see below.
1) Product number.
$ 950
1044
$ 977
1071
$1016
1110
2) Trim color.
Full Pull Option:
Specify full pull option (if desired) by adding X as
the 9th digit.
Note: $58 upcharge (list) for Metallic trim color.
Without Lock Option
Freestanding pedestal without lock requires modification of the
product number and list price. Change the L in the product
number to an N and deduct $21 list.
Example: PDF-20-DNN=Pencil/Box/File pedestal without lock.
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
351
UniGroup Too Price List
950 Series Freestanding Pedestals
for use with UniGroup Too, UniGroup, PLACES
Freestanding Pedestal—
File/File
PDF-J
Height
Depth
Width
Description
Number
Price
27 7/8′′(708mm)
20′′(508mm)
15 3/8′′(391mm)
27 7/8′′(708mm)
24′′(610mm)
15 3/8′′(391mm)
27 7/8′′(708mm)
30′′(762mm)
15 3/8′′(391mm)
With lock
With lock/reference shelf
With lock
With lock/reference shelf
With lock
With lock/reference shelf
PDF-20-JLN
PDF-20-JLE
PDF-24-JLN
PDF-24-JLE
PDF-30-JLN
PDF-30-JLE
$829
923
$856
950
$895
989
Features
To Order, Specify:
• Includes two (2) file compressors.
• 12′′/12′′(305mm/305mm) drawer stack.
• Freestanding pedestals include four glides with a height
adjustment of 1′′(25mm).
• Drawer interiors are black.
• Available without lock, see below.
1) Product number.
2) Trim color.
Full Pull Option:
Specify full pull option (if desired) by adding X as
the 9th digit.
Note: $58 upcharge (list) for Metallic trim color.
Freestanding Pedestal
—Pencil/Box/EDP
PDF-K
27 7/8′′(708mm)
20′′(508mm)
15 3/8′′(391mm)
27 7/8′′(708mm)
24′′(610mm)
15 3/8′′(391mm)
27 7/8′′(708mm)
30′′(762mm)
15 3/8′′(391mm)
With lock
With lock/reference shelf
With lock
With lock/reference shelf
With lock
With lock/reference shelf
PDF-20-KLN
PDF-20-KLE
PDF-24-KLN
PDF-24-KLE
PDF-30-KLN
PDF-30-KLE
Features
To Order, Specify:
• Includes one (1) pencil tray, one (1) side-to-side 6′′(152mm)
drawer divider, and one (1) file compressor.
• 3′′/6′′/15′′(76mm/152mm/381mm) drawer stack.
• Freestanding pedestals include four glides with a height
adjustment of 1′′(25mm).
• Drawer interiors are black.
• Available without lock, see below.
1) Product number.
$ 981
1075
$1008
1102
$1047
1141
2) Trim color.
Full Pull Option:
Specify full pull option (if desired) by adding X as
the 9th digit.
Note: $58 upcharge (list) for Metallic trim color.
Without Lock Option
Freestanding pedestal without lock requires modification of the
product number and list price. Change the L in the product number
to an N and deduct $21 list.
Example: PDF-20-JNN=File/File pedestal without lock.
352
April 2008 / USA
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
950 Series Pedestal Conversion Kits
for use with UniGroup Too, UniGroup, PLACES
Attached Base Conversion Kit
Description
Number
Price
20′′(508mm) pedestal depth for 24′′(610mm)-high drawer stack
24′′(610mm) pedestal depth for 24′′(610mm)-high drawer stack
30′′(762mm) pedestal depth for 24′′(610mm)-high drawer stack
PCKX-2024
PCKX-2424
PCKX-3024
$157
157
157
Features
To Order, Specify:
•
•
•
•
1) Product number.
Includes base, four (4) glides, and attachment hardware.
Converts suspended pedestal to attached pedestal.
Designed to attach to pedestal and support a worksurface.
Adds 2 7/8′′(73mm) to pedestal height.
2) Trim color.
Note: $24 upcharge (list) for Metallic trim color.
Specification Tip
• Only use on 950 Series pedestals.
PCKX
Attached Conversion Kit
20′′(508mm) pedestal depth for 24′′(610mm)-high drawer stack
24′′(610mm) pedestal depth for 24′′(610mm)-high drawer stack
30′′(762mm) pedestal depth for 24′′(610mm)-high drawer stack
PCKB-2024
PCKB-2424
PCKB-3024
Features
To Order, Specify:
• Includes top, counterweight, and attachment hardware.
• Converts fixed pedestal to a freestanding pedestal that is
independent of the worksurface.
• Pedestal will not fit under a worksurface set at 29′′(737mm)
height.
• Adds 1/2′′(13mm) to pedestal height.
1) Product number.
$181
181
181
2) Trim color.
Note: $24 upcharge (list) for Metallic trim color.
Specification Tip
PCKB
• Only use on 950 Series pedestals.
Freestanding Conversion Kit
20′′(508mm) pedestal depth for 21′′(533mm)-high drawer stack
20′′(508mm) pedestal depth for 24′′(610mm)-high drawer stack
24′′(610mm) pedestal depth for 21′′(533mm)-high drawer stack
24′′(610mm) pedestal depth for 24′′(610mm)-high drawer stack
30′′(762mm) pedestal depth for 24′′(610mm)-high drawer stack
PCKF-2021
PCKF-2024
PCKF-2421
PCKF-2424
PCKF-3024
Features
To Order, Specify:
• Includes top, base, four (4) glides, counterweight, and
attachment hardware.
• Converts attached or fixed pedestals to freestanding
pedestal.
• Adds 2 7/8′′(73mm) to pedestal height.
1) Product number.
$246
246
246
246
246
2) Trim color.
Note: $30 upcharge (list) for Metallic trim color.
Specification Tip
PCKF
• Only use on 950 Series pedestals.
Note: Part numbers are for pedestals with 3014 and 487
date stamps. Refer to eParts price list for pedestals
with date stamp 262.
• The date stamp can be found on the underside of the top
drawer.
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
353
UniGroup Too Price List
950 Series Pedestal Conversion Kits
for use with UniGroup Too, UniGroup, PLACES
Mobile Conversion Kit
Description
Number
Price
20′′(508mm) pedestal depth for 21′′(533mm)-high drawer stack
20′′(508mm) pedestal depth for 24′′(610mm)-high drawer stack
24′′(610mm) pedestal depth for 21′′(533mm)-high drawer stack
24′′(610mm) pedestal depth for 24′′(610mm)-high drawer stack
30′′(762mm) pedestal depth for 24′′(610mm)-high drawer stack
PCKM-2021
PCKM-2024
PCKM-2421
PCKM-2424
PCKM-3024
$284
284
284
284
284
Features
To Order, Specify:
• Includes top, counterweight, four (4) casters (two-swivel and
two non-swivel), and attachment hardware.
• Converts suspended or fixed pedestals to mobile pedestal.
• Adds 2 3/4′′(70mm) to pedestal height.
1) Product number.
Specification Tip
• Only use on 950 Series pedestals.
PCKM
Note: Part numbers are for pedestals with 3014 and 487
date stamps. Refer to eParts price list for pedestals
with date stamp 262.
• The date stamp can be found on the underside of the top
drawer.
354
April 2008 / USA
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Trim color.
Note: $30 upcharge (list) for Metallic trim color.
UniGroup Too Price List
950 Series Pedestal Conversion Kits
for use with UniGroup Too, UniGroup, PLACES
Description
Freestanding Base Conversion For 20′′(508mm)-deep drawers
Kit
For 24′′(610mm)-deep drawers
For 30′′(762mm)-deep drawers
Number
Price
PCKS-20
PCKS-24
PCKS-30
$119
119
119
Features
To Order, Specify:
• Includes base, four (4) glides, and attachment hardware.
• Converts mobile unit to freestanding.
• Adds 2 3/8′′(60mm) to pedestal height.
1) Product number.
2) Trim color.
Note: $23 upcharge (list) for Metallic trim color.
Specification Tip
• Only use on 950 Series pedestals.
PCKS
Counterweight
Height
Depth
Width
Number
Price
21′′(533mm)-24′′(610mm)
3/16′′(5mm)
12 5/8′′(321mm)
PCWW-10
$139
Features
To Order, Specify:
• Use with 21′′(533mm)-24′′(610mm) high pedestals.
• 25-pound counterweight.
• Shipped separately for field installation.
1) Product number.
(No finish specification required.)
Available on RUSH.
Specification Tip
• Comes standard with all mobile and stationary pedestals.
PCWW-10
Heavy Loading Counterweight
PCWW-15
1 5/8′′(41mm)
7 5/8′′(194mm)
14 1/2′′(368mm)
Features
To Order, Specify:
• Use with mobile or freestanding pedestals for heavier load
bearing capacity above that provided by standard
counterweight.
• The 32-pound counterweight is used in addition to the
counterweight that is standard in all mobile units.
• Universal for any depth mobile or freestanding pedestal.
• Shipped separately for field installation.
1) Product number.
(No finish specification required.)
Mobile Caster Kit
PMCC-2
PCWW-15
PMCC-2
$334
$52
Features
To Order, Specify:
• Includes four (4) casters (two swivel and two non-swivel) and
attachment hardware.
• Converts freestanding unit to mobile.
• Standard in black finish only.
1) Product number.
(No finish specification required.)
Available on RUSH.
Specification Tip
• Only use on 950 Series pedestals.
Note: Part numbers are for pedestals with 3014 and 487
date stamps. Refer to eParts price list for pedestals
with date stamp 262.
• The date stamp can be found on the underside of the top
drawer.
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
355
UniGroup Too Price List
950 Series Pedestal Accessories
for use with UniGroup Too, UniGroup, PLACES
Pencil Tray
Height
Depth
Width
Number
Price
1 1/4′′(32mm)
5 1/2′′(140mm)
12 7/8′′(327mm)
PPT-3
$24
Features
To Order, Specify:
• Suspends from and slides on sides of 3′′(76mm) or
6′′(152mm) drawer.
• Standard in black finish color only.
1) Product number.
(No finish specification required.)
Available on RUSH.
PPT-3
Stationery Organizer
4′′(102mm)
9′′(229mm)
12 5/8′′(321mm)
PSO-6
$43
Features
To Order, Specify:
•
•
•
•
1) Product number.
(No finish specification required.)
Includes box of six (6) organizers.
Divides 6′′(152mm) drawer into angled bins for stationery.
Inserts into 1′′(25mm) incremental slots in sides of drawer.
Standard in black finish color only.
PSO-6
Stationery Organizer Divider
1′′(25mm)
7 1/4′′(184mm)
1 7/8′′(48mm)
PSOD-6
$23
Features
To Order, Specify:
•
•
•
•
1) Product number.
(No finish specification required.)
Includes box of six (6) dividers.
Use with stationery organizer.
Subdivides stationery organizer into smaller units.
Standard in black finish color only.
PSOD-6
Reference Tray
13 1/4′′(337mm)
8 1/2′′(216mm)
PRT-1
$29
Features
To Order, Specify:
• Includes one (1) tray and plexiglass cover.
• Suspends from and slides on sides of 3′′(76mm) or
6′′(152mm) drawer.
• Standard in black finish color only.
1) Product number.
(No finish specification required.)
PRT-1
Side-to-Side 6′′(152mm)
Drawer Divider
2 3/4′′(70mm)
12 5/8′′(321mm)
PPDD-6
Features
To Order, Specify:
•
•
•
•
1) Product number.
(No finish specification required.)
Includes box of six (6) dividers.
Subdivides 6′′(152mm) drawer.
Adjustable in 1′′(25mm) increments front-to-back of drawer.
Standard in black finish color only.
Note: Part numbers are for pedestals with 3014 and 487
date stamp. Refer to service parts price list for
pedestals with date stamp 262.
• The date stamp can be found on the underside of the top
drawer.
PPDD-6
Pedestal Drawer Lock
Conversion Kit
Description
Number
For 18′′(457mm)-high drawer stack (styles A, B, and C)
PLLK-18-N
For 21′′(533mm)-high drawer stack (styles D, E, and F)
PLLK-21-N
For 24′′(610mm)-high drawer stack (styles G, H, J, and K) PLLK-24-N
April 2008 / USA
Price
Number
Price
$28
28
28
PLLK-18-R
PLLK-21-R
PLLK-24-R
$28
28
28
Features
To Order, Specify:
• Includes mounting hardware, lock, and key.
• Converts suspended, attached, mobile or freestanding
pedestals without locks to lockable style.
1) Product number.
(No finish specification required.)
Note: -N is for pedestals without reference shelf.
-R is for pedestals with reference shelf.
Note: Part numbers are for pedestals with 3014 and 487
date stamps. Refer to eParts price list for pedestals
with date stamp 262.
• The date stamp can be found on the underside of the top
drawer.
356
$22
Class BA – SIN 711-1; Discount Group I
Canadian Conversion Factor: Refer to haworth.com/Canada
UniGroup Too Price List
950 Series Personal Storage Tower
for use with UniGroup Too, UniGroup, PLACES
Number
Hinged Door
LTHL
(Left-hand shown)
Height
Depth
Width
Pedestal
Shelf
45 1/4′′(1148mm)
23′′(584mm)
24′′(610mm)
62 1/2′′(1588mm)
23′′(584mm)
24′′(610mm)
72 1/2′′(1842mm)
23′′(584mm)
24′′(610mm)
Box/Box/File
File/File
Box/Box/File
File/File
File/File/File
Box/Box/File
File/File
File/File/File
1
1
2
2
1
3
3
1
To Order, Specify:
• Hinged Door Module has black, height adjustable shelves in
2 1/4′′(57mm) increments.
• Standard with three black locks (one each for the pedestal,
valet and hinged door) that are keyed alike.
• Valet includes one coat rod.
• Drawer interiors and accessories standard in black.
• Each file drawer includes one file compressor.
• Each box drawer includes one side-to-side divider.
• Order pencil tray separately.
• Translucent top option adds 2 3/4′′(70mm) to overall height.
• Caster option (available only on 45 1/4′′ H.) adds 3′′(76mm)
to overall height. Includes two locking swivel and two
non-swivel casters.
• Ships assembled.
1) Product number, including:
Price
$2463
2288
$2591
2412
2705
$2981
2774
3111
1 Valet Orientation:
L
Left-hand
R Right-hand
2 Top Option:
F
Flat top
T
Translucent top, add $425
2) Specify full Pull option (if desired) by adding X
as 11th digit
3) Specify caster option (available only on 45 1/4′′
high units, if desired) by adding a C as 11th or
12th digit, add $196 list
4) Trim color for case, door and drawer fronts.
Note: Upcharge (list) for Metallic trim color.
LTH -4242 = $196
LTH -5242 = $223
LTH -6242 = $252
Optional casters are available
only on 45 1/4′′ H x 24′′ W units.
LTBL
(Left-hand shown)
2
-4242-H
-4242-J
-5242-H
-5242-J
-5242-M
-6242-H
-6242-J
-6242-M
Features
NOTE:
Side Bookcase
1
LTH
LTH
LTH
LTH
LTH
LTH
LTH
LTH
45 1/4′′(1148mm)
23′′(584mm)
24′′(610mm)
62 1/2′′(1588mm)
23′′(584mm)
24′′(610mm)
72 1/2′′(1842mm)
23′′(584mm)
24′′(610mm)
Box/Box/File
File/File
Box/Box/File
File/File
Box/Box/File
File/File
1
1
2
2
3
3
LTB
LTB
LTB
LTB
LTB
LTB
-4242-H
-4242-J
-5242-H
-5242-J
-6242-H
-6242-J
Features
To Order, Specify:
• Bookcase Module has color matched, height adjustable
shelves in 2 1/4′′(57mm) increments.
• Standard with two black locks (one each for the pedestal and
valet) that are keyed-alike.
• Valet includes one coat rod.
• Drawer interiors and accessories standard in black.
• Interior of open bookcase, including shelves, are color
matched to exterior of tower.
• Each file drawer includes one file compressor.
• Each box drawer includes one side-to-side divider.
• Order pencil tray separately.
• Translucent top option adds 2 3/4′′(70mm) to overall height.
• Caster option (available only on 45 1/4′′ H.) adds 3′′(76mm)
to overall height. Includes two locking swivel and two
non-swivel casters.
• Ships assembled.
1) Product number, including:
$2216
2058
$2332
2171
$2682
2497
1 Valet Orientation:
L
Left-hand
R Right-hand
2 Top Option:
F
Flat top
T
Translucent top, add $425
2) Specify full Pull option (if desired) by adding X
as 11th digit
3) Specify caster option (available only on 45 1/4′′
high units, if desired) by adding a C as 11th or
12th digit, add $196 list
4) Trim color for case, door, drawer fronts and
adjustable shelves.
Note: Upcharge (list) for Metallic trim color.
LTB -4242 = $196
LTB -5242 = $223
LTB -6242 = $252
NOTE:
Optional casters are available
only on 45 1/4′′ H x 24′′ W units.
Class MA – SIN 711-3; Discount Group II
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
357
UniGroup Too Price List
950 Series Personal Storage Tower
for use with UniGroup Too, UniGroup, PLACES
Number
Hinged Door
Height
Depth
Width
Pedestal
Shelf
45 1/4′′(1148mm)
23′′(584mm)
15 1/4′′(387mm)
62 1/2′′(1588mm)
23′′(584mm)
15 1/4′′(387mm)
Box/Box/File
File/File
Box/Box/File
File/File
File/File/File
1
1
2
2
1
To Order, Specify:
• Hinged Door Module has black, height adjustable shelves in
2 1/4′′(57mm) increments.
• Standard with two black locks (one each for the pedestal and
hinged door) that are keyed alike.
• Drawer interiors and accessories standard in black.
• Each file drawer includes one file compressor.
• Each box drawer includes one side-to-side divider.
• Order pencil tray separately.
• Ships assembled.
1) Product number, including:
45 1/4′′(1148mm)
23′′(584mm)
15 1/4′′(387mm)
April 2008 / USA
1 Orientation:
L
Left-hand
R Right-hand
2) Specify full Pull option (if desired) by adding X
as 11th digit
62 1/2′′(1588mm)
23′′(584mm)
15 1/4′′(387mm)
Box/Box/File
File/File
Box/Box/File
File/File
1
1
2
2
LTB
LTB
LTB
LTB
-4152-HF
-4152-JF
-5152-HF
-5152-JF
Features
To Order, Specify:
• Bookcase Module has color matched, height adjustable
shelves in 2 1/4′′(57mm) increments.
• Standard with one black lock (for the pedestal).
• Drawer interiors and accessories standard in black.
• Interior of open bookcase, including shelves, are color
matched to exterior of tower.
• Each file drawer includes one file compressor.
• Each box drawer includes one side-to-side divider.
• Order pencil tray separately.
• Ships assembled.
1) Product number, including:
2 3/4′′(70mm)
23′′(584mm)
24′′(610mm)
L
Left-hand
R Right-hand
2) Specify full Pull option (if desired) by adding X
as 11th digit
3) Trim color for case, door, drawer fronts and
adjustable shelves.
Note: Upcharge (list) for Metallic trim color.
LTB -4152 = $196
LTB -5152 = $223
LTTT-2424
To Order, Specify:
• Top can be retrofit to existing Personal Storage Towers with
flat tops.
• Translucent top adds 2 3/4′′(70mm) to overall height.
• For use on 24′′(610mm) wide Personal Storage Towers only.
1) Product number.
Class MA – SIN 711-3; Discount Group II
Canadian Conversion Factor: Refer to haworth.com/Canada
$1926
1789
$2065
1917
1 Orientation:
Features
LTTT-2424
358
$2141
1988
$2295
2131
2398
3) Trim color for case, door and drawer fronts.
Note: Upcharge (list) for Metallic trim color.
LTH -4152 = $196
LTH -5152 = $223
LTBL
(Left-hand shown)
Translucent Tower Top
-4152-HF
-4152-JF
-5152-HF
-5152-JF
-5152-MF
Features
LTHL
(Left-hand shown)
Side Bookcase
Price
1
LTH
LTH
LTH
LTH
LTH
$451
2) Trim color for top.
Note: $28 Upcharge (list) for Metallic trim color.
UniGroup Too Price List
950 Series Lateral Files – Freestanding
for use with UniGroup Too, UniGroup, PLACES
Number without
Counterweight
Height
Two-High
Depth
Side-to-side hanging bars
26 7/8′′(682mm)
18′′(457mm)
Front-to-back hanging bars
26 7/8′′(682mm)
18′′(457mm)
LFRS-LD0H
LFSS-LD0H
Two-High
With Counterweight*
Width
Number with
Counterweight
Price
1
30′′(762mm)
36′′(914mm)
42′′(1067mm)
LF
LF
LF
S-230-LD0H
S-236-LD0H
S-242-LD0H
$789
893
969
30′′(762mm)
36′′(914mm)
42′′(1067mm)
LF
LF
LF
S-230-LD0F
S-236-LD0F
S-242-LD0F
$818
922
998
Price
1
LF
LF
LF
LF
LF
LF
S-230-LDCH
S-236-LDCH
S-242-LDCH
S-230-LDCF
S-236-LDCF
S-242-LDCF
Features
To Order, Specify:
• One counterweight is required per two-high file when not
ganged or attached to wall.
• Includes one factory-installed counterweight.*
• Includes lateral file, label holders with inserts and side-to-side
hanging bars (two per drawer); or front-to-back hanging bars
(two each per drawer) and one side-to-side bar.
• Equipped with two (2) 12′′(305mm) drawers.
• Lock plug(s) and key(s) are shipped with random numbering
unless they are specified ��keyed-alike’’ or ��master-keyed.’’
• Non-locking option available.
• Drawer interiors are black.
1) Product number, including:
Available on RUSH.
$ 894
1008
1113
$ 923
1037
1142
1 Case Edge Detail:
R Radius
S
Square
2) Case trim color.
3) Drawer front trim color.
4) Specify full pull option (if desired) by adding X
as 12th digit.
Note: $87 upcharge (list) for Metallic trim color.
Specification Tip
LFRS-LDCH
LFSS-LDCH
• To specify dividers or compressors in place of side-to-side
hanging bars, substitute D for dividers (three per drawer) or C
for compressors (one per drawer) in place of the H.
Non-Locking Option
Non-locking files require modification of the product number and
price. To specify, replace the eighth digit of the product number with
an N. Deduct $47 from the list price.
Example: LFRS-230-LD0H becomes LFRS-230-ND0H.
Class MA – SIN 711-3; Discount Group II
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
359
UniGroup Too Price List
950 Series Lateral Files – Freestanding
for use with UniGroup Too, UniGroup, PLACES
Number
Three-High
LFRS-LD0H
LFSS-LD0H
Height
Depth
Width
Description
38 7/8′′(987mm)
18′′(457mm)
Side-to-side hanging bars
38 7/8′′(987mm)
18′′(457mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
Front-to-back hanging bars
To Order, Specify:
• Includes lateral file, label holders with inserts and side-to-side
hanging bars (two per drawer); or front-to-back hanging bars
(two each per drawer) and one side-to-side bar.
• Equipped with three (3) 12′′(305mm) drawers.
• One counterweight is recommended per three- or four-high
file when not ganged or attached to wall.
• Lock plug(s) and key(s) are shipped with random numbering
unless they are specified ��keyed-alike’’ or ��master-keyed.’’
• Non-locking option available.
• Drawer interiors are black.
1) Product number, including:
Specification Tip
• To specify dividers or compressors in place of side-to-side
hanging bars, substitute D for dividers (three per drawer) or C
for compressors (one per drawer) in place of the H.
LFRS-LD0H
LFSS-LD0H
50 3/4′′(1289mm)
18′′(457mm)
50 3/4′′(1289mm)
18′′(457mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
S
Square
2) Case trim color.
3) Drawer front trim color.
4) Specify full pull option (if desired) by adding X
as 12th digit.
Note: Upcharge for Metallic trim color.
3-high $114 (list).
4-high $141 (list).
LF
LF
LF
LF
LF
LF
S-430-LD0H
S-436-LD0H
S-442-LD0H
S-430-LD0F
S-436-LD0F
S-442-LD0F
Features
To Order, Specify:
• Includes lateral file, label holders with inserts and side-to-side
hanging bars (two per drawer); or front-to-back hanging bars
(two each per drawer) and one side-to-side bar.
• Equipped with four (4) 12′′(305mm) drawers.
• One counterweight is recommended per three- or four-high
file when not ganged or attached to wall.
• Standard with lock.
• Lock plug(s) and key(s) are shipped with random numbering
unless they are specified ��keyed-alike’’ or ��master-keyed.’’
• Non-locking option available.
• Drawer interiors are black.
1) Product number, including:
• To specify dividers or compressors in place of side-to-side
hanging bars, substitute D for dividers (three per drawer) or C
for compressors (one per drawer) in place of the H.
Non-Locking Option
Non-locking files require modification of the product number and
price. To specify, replace the eighth digit of the product number with
an N. Deduct $47 from the list price.
Example: LFRS-330-LD0H becomes LFRS-330-ND0H.
April 2008 / USA
R Radius
Front-to-back hanging bars
Specification Tip
Class MA – SIN 711-3; Discount Group II
Canadian Conversion Factor: Refer to haworth.com/Canada
$1028
1167
1321
$1071
1210
1364
1 Case Edge Detail:
Side-to-side hanging bars
Available on RUSH.
360
S-330-LD0H
S-336-LD0H
S-342-LD0H
S-330-LD0F
S-336-LD0F
S-342-LD0F
Features
Available on RUSH.
Four-High
Price
1
LF
LF
LF
LF
LF
LF
$1308
1516
1717
$1364
1572
1773
1 Case Edge Detail:
R Radius
S
Square
2) Case trim color.
3) Drawer front trim color.
4) Specify full pull option (if desired) by adding X
as 12th digit.
Note: Upcharge for Metallic trim color.
3-high $114 (list).
4-high $141 (list).
UniGroup Too Price List
950 Series Lateral Files – Freestanding
for use with UniGroup Too, UniGroup, PLACES
Number
Five-High
LFRS-LD0H
LFSS-LD0H
Height
Depth
Width
Description
62 3/4′′(1594mm)
18′′(457mm)
Side-to-side hanging bars
62 3/4′′(1594mm)
18′′(457mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
Price
1
LF
LF
LF
LF
LF
LF
Front-to-back hanging bars
S-530-LD0H
S-536-LD0H
S-542-LD0H
S-530-LD0F
S-536-LD0F
S-542-LD0F
Features
To Order, Specify:
• Includes lateral file, label holders with inserts and side-to-side
hanging bars (two per drawer); or front-to-back hanging bars
(two each per drawer) and one side-to-side bar.
• Equipped with four (4) 12′′(305mm) drawers and one (1)
roll-out shelf with receding door in the top position.
• One counterweight is recommended per five-high file when
not ganged or attached to wall.
• Lock plug(s) and key(s) are shipped with random numbering
unless they are specified ��keyed-alike’’ or ��master-keyed.’’
• Non-locking option available.
• Drawer and shelf interiors are black.
1) Product number, including:
Available on RUSH.
$1570
1806
2052
$1641
1877
2123
1 Case Edge Detail:
R Radius
S
Square
2) Case trim color.
3) Drawer/receding door front trim color.
4) Specify full pull option (if desired) by adding X
as 12th digit.
Note: $171 upcharge (list) for Metallic trim color.
Specification Tips
• To specify dividers or compressors in place of side-to-side
hanging bars, substitute D for dividers (three per drawer) or C
for compressors (one per drawer) in place of the H.
• 12′′(305mm) roll-out shelf does not accommodate standard
binders, see custom file section.
Non-Locking Option
Non-locking files require modification of the product number and
price. To specify, replace the eighth digit of the product number with
an N. Deduct $47 from the list price.
Example: LFRS-530-LD0H becomes LFRS-530-ND0H.
Class MA – SIN 711-3; Discount Group II
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
361
UniGroup Too Price List
950 Series Lateral Files – Freestanding, Receding Doors, Roll-Out Shelves
for use with UniGroup Too, UniGroup, PLACES
Number without
Counterweight
Height
Two-High
Depth
Side-to-side hanging bars
26 7/8′′(682mm)
18′′(457mm)
Front-to-back hanging bars
26 7/8′′(682mm)
18′′(457mm)
LFRS-LR0H
LFSS-LR0H
Two-High
With Counterweight*
Width
Price
1
LF
LF
LF
S-230-LR0H
S-236-LR0H
S-242-LR0H
$789
893
969
LF
LF
LF
S-230-LRCH
S-236-LRCH
S-242-LRCH
$ 894
1008
1113
30′′(762mm)
36′′(914mm)
42′′(1067mm)
LF
LF
LF
S-230-LR0F
S-236-LR0F
S-242-LR0F
$818
922
998
LF
LF
LF
S-230-LRCF
S-236-LRCF
S-242-LRCF
$ 923
1037
1142
Features
To Order, Specify:
• One counterweight is recommended per two-high file when
not ganged or attached to wall.
• Includes one factory-installed counterweight.*
• Includes lateral file, one factory-installed counterweight and
label holders with inserts and side-to-side hanging bars (two
each per shelf) and one side-to-side bar.
• Equipped with two (2) 12′′(305mm) roll-out shelves behind
receding doors.
• Lock plug(s) and key(s) are shipped with random numbering
unless they are specified ��keyed-alike’’ or ��master-keyed.’’
• Non-locking option available.
• Shelf interiors are black.
1) Product number, including:
• To specify dividers or compressors in place of side-to-side
hanging bars, substitute D for dividers (three per shelf) or C
for compressors (one per shelf) in place of the H.
• 12′′(305mm) roll-out shelves do not accommodate standard
binders, see custom file section.
Non-Locking Option
Non-locking files require modification of the product number and
price. To specify, replace the eighth digit of the product number with
an N. Deduct $47 from the list price.
Example: LFRS-230-LRCH becomes LFRS-230-NRCH.
362
April 2008 / USA
Price
1
30′′(762mm)
36′′(914mm)
42′′(1067mm)
Specification Tips
LFRS-LRCH
LFSS-LRCH
Number with
Counterweight
Class MA – SIN 711-3; Discount Group II
Canadian Conversion Factor: Refer to haworth.com/Canada
1 Case Edge Detail:
R Radius
S
Square
2) Case trim color.
3) Drawer/receding door front trim color.
4) Specify full pull option (if desired) by adding
X as 12th digit.
Note: $84 upcharge (list) for Metallic trim color.
UniGroup Too Price List
950 Series Credenza Lateral File Accessories
for use with UniGroup Too, UniGroup, PLACES
Top
Thickness
Number
Single Top, Wood Surface with 1 3/16′′(30mm)
Wood Trim — Radius or Square
Edge
Depth
Width
18′′(457mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
1
CFT
CFT
CFT
-1830-W
-1836-W
-1842-W
Wood
Price I
Wood
Price II
$435
488
535
$478
532
588
Features
To Order, Specify:
• Wood veneer top with wood edge trim.
• Shipped separately for field installation.
• Applicable only to 950 Series credenza lateral files purchased
after 10/2/89.
1) Product number, including:
1 Edge Detail:
R Radius
S
Square
2) Wood finish.
CFTR-W
CFTS-W
Single Top, Laminate Surface
— Radius or Square Edge
Top
Thickness
Depth
Width
Number
1 1/4′′(32mm)
18′′(457mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
Price
1
CFT
CFT
CFT
-1830-LT
-1836-LT
-1842-LT
$247
276
304
Features
To Order, Specify:
• High-pressure laminate surface with a 3mm T-molded edge
available on radius edge top, 3mm edgeband available on
square edge top.
• Shipped separately for field installation.
• Applicable only to 950 Series credenza lateral files purchased
after 10/2/89.
1) Product number, including:
Available on RUSH.
1 Edge Detail:
R Radius
S
Square
2) Laminate surface color.
3) Edge trim color.
CFTR-LT
CFTS-LT
Class MA – SIN 711-3; Discount Group II
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
363
UniGroup Too Price List
950 Series File Accessories
for use with UniGroup Too, UniGroup, PLACES
Compressor
CP
Height
Width
Description
Number
Price
7′′(178mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
For drawer or shelf interiors
For drawer or shelf interiors
For drawer or shelf interiors
CP-30
CP-36
CP-42
$27
28
28
Features
To Order, Specify:
• Includes one (1) compressor and horizontal track.
• For use in 9′′(229mm)-, 12′′(305mm)-, and 15′′(381mm)-high
drawers and roll-out shelves.
• For converting lateral file drawer or shelf from any other filing
format to compressor style.
• Manually-operated spring clip release for infinite drawer
settings.
• Standard in black finish color only.
1) Product number.
(No color specification required.)
Side-to-Side Hanging Bars
HB
30′′(762mm)
36′′(914mm)
42′′(1067mm)
For drawer or roll-out shelf
For drawer or roll-out shelf
For drawer or roll-out shelf
HB-30
HB-36
HB-42
Features
To Order, Specify:
• Includes two (2) side-to-side hanging bars.
• For converting lateral file drawer or shelf from any other filing
format to side-to-side format.
• Use in conjunction with separately specified front-to-back
hanging bars for front-to-back filing.
• Standard in black finish color only.
1) Product number.
(No color specification required.)
$45
45
45
Specification Tip
• Haworth recommends one (1) separately specified
side-to-side hanging bar for each 12′′(305mm) or
15′′(381mm) shelf ordered with dividers. The side-to-side
hanging bar functions as a letter- or A4-depth backstop for
3-ring binders or folders.
Dividers
LDV
For 12′′(305mm) or 15′′(381mm)
-high drawer or shelf
For 9′′(229mm)-high drawer
or shelf
For 6′′(152mm)-high drawer
or shelf
For 3′′(76mm)-high drawer
or shelf
LDV-06
27
LDV-03
27
To Order, Specify:
1) Product number.
(No color specification required.)
• Files manufactured before 6/28/93, order dividers from lateral
files eParts.
April 2008 / USA
27
• Includes three (3) dividers dimensioned to utilize the full
drawer depth.
• For use in files manufactured after 6/28/93.
• Dividers may be used with any file width and can be adjusted
at 1′′(25mm) increments.
• Standard in black finish color only.
Specification Tip
Class MA – SIN 711-3; Discount Group II
Canadian Conversion Factor: Refer to haworth.com/Canada
$27
LDV-09
Features
Available on RUSH.
364
LDV-1215
UniGroup Too Price List
950 Series File Accessories
for use with UniGroup Too, UniGroup, PLACES
Front-to-Back Hanging Bars
Length
Number
Price
15 3/4′′(400mm)
FTB-15
$25
Features
To Order, Specify:
• Includes two (2) front-to-back bars.
• Front-to-back hanging bars may be used with any width file.
• Must be used in drawers or roll-out shelf interiors featuring
side-to-side hanging bars set at EDP depth.
• Standard in black finish color only.
1) Product number.
(No color specification required.)
Available on RUSH.
FTB-15
Counterweight
CW
Width
Number
Price
30′′(762mm)
36′′(914mm)
42′′(1067mm)
CW-30
CW-36
CW-42
$105
115
144
Features
To Order, Specify:
• One counterweight is required per two-high freestanding file
when not ganged or attached to wall.
• One counterweight is recommended per three-, four- or
five-high file when not ganged or attached to wall.
• Shipped separately for field installation.
• Designed to mount in the 950 Series Lateral file only.
1) Product number.
(No color specification required.)
Available on RUSH.
Lateral File Lockbar
LBA
File Height
Number
Price
Two-High
Three-High
Four-High
Five-High
LBA-2
LBA-3
LBA-4
LBA-5
$184
185
186
187
Features
To Order, Specify:
• Lockbar attaches to the front of lateral file.
• Attachment hardware includes two top brackets and one
bottom bracket.
• One of the top brackets may be mounted on the side of the
file case for storing the lockbar during file access.
• Lockbar meets requirements established by the U.S.
Department of Defense.
• Shipped separately for field installation.
1) Product number.
Class MA – SIN 711-3; Discount Group II
Canadian Conversion Factor: Refer to haworth.com/Canada
2) Trim color.
April 2008 / USA
365
UniGroup Too Price List
Tables
UniGroup
Laminate Square Table
Height
Depth
Width
Number
Price
29′′(737mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
24′′(610mm)
30′′(762mm)
36′′(914mm)
TPPS-2424
TPPS-3030
TPPS-3636
$497
528
563
Features
To Order, Specify:
• High-pressure laminate top with 3mm T-mold edge.
• Pedestal base is available in trim colors.
• Self-adjusting glides.
1) Product number.
2) Laminate surface color.
3) Edge trim color.
TPPS
4) Base trim color.
Laminate Round Table
TPPR
29′′(737mm)
30′′(762mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
TPPR-30
TPPR-36
TPPR-42
TPPR-48
Features
To Order, Specify:
• High-pressure laminate top with 3mm T-mold edge.
• Pedestal base is available in trim colors.
• Self-adjusting glides.
1) Product number.
$484
542
602
721
2) Laminate surface color.
3) Edge trim color.
Available on RUSH.
4) Base trim color.
Laminate Rectangular Table
29′′(737mm)
30′′(762mm)
36′′(914mm)
TPCR
54′′(1372mm)
60′′(1524mm)
72′′(1829mm)
72′′(1829mm)
TPCR-3054
TPCR-3060
TPCR-3072
TPCR-3672
Features
To Order, Specify:
• High-pressure laminate top with 3mm T-mold edge.
• Bases are available in trim colors.
• Self-adjusting glides.
1) Product number.
$780
792
838
926
2) Laminate surface color.
3) Edge trim color.
4) Base trim color.
Laminate Oval Table
29′′(737mm)
30′′(762mm)
36′′(914mm)
TPC0
60′′(1524mm)
72′′(1829mm)
60′′(1524mm)
72′′(1829mm)
TPC0-3060
TPC0-3072
TPC0-3660
TPC0-3672
Features
To Order, Specify:
• High-pressure laminate top with 3mm T-mold edge.
• Bases are available in trim colors.
• Self-adjusting glides.
1) Product number.
2) Laminate surface color.
3) Edge trim color.
4) Base trim color.
366
April 2008 / USA
Class AA – SIN 711-1; Discount Group X
Canadian Conversion Factor: Refer to haworth.com/Canada
$811
876
880
960
UniGroup Too Price List
Tables
PLACES
Laminate C-Leg Table
Height
Depth
Width
Number
Price
26′′(660mm)
24′′(610mm)
36′′(914mm)
48′′(1219mm)
60′′(1524mm)
36′′(914mm)
48′′(1219mm)
60′′(1524mm)
36′′(914mm)
48′′(1219mm)
60′′(1524mm)
36′′(914mm)
48′′(1219mm)
60′′(1524mm)
HTCT-2436-T
HTCT-2448-T
HTCT-2460-T
HTCT-3036-T
HTCT-3048-T
HTCT-3060-T
HTCW-2436-T
HTCW-2448-T
HTCW-2460-T
HTCW-3036-T
HTCW-3048-T
HTCW-3060-T
$ 550
715
747
627
805
861
$ 642
832
868
732
939
1004
30′′(762mm)
HTCT-T
HTCW-T
29′′(737mm)
24′′(610mm)
30′′(762mm)
Features
To Order, Specify:
• Two heights, 26′′(660mm) machine height and 29′′(737mm)
desk height.
• High-pressure laminate top with 3mm T-mold edge.
• Base and modesty panel are available in trim colors.
• Tables feature 1/4-height modesty panels.
• C-Leg design permits free leg swing.
• Tables 48′′(1219mm) and wider will accommodate a pencil
drawer but not drawer pedestals.
• 24′′(610mm) deep tables will not accommodate an adjustable
keyboard pad.
1) Product number.
2) Laminate surface color.
3) Edge trim color.
4) Base trim color.
Available on RUSH.
Class BA – SIN 711-1; Discount Group X
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
367
UniGroup Too Price List
Sit-to-Stand Adjustable Height Tables
PLACES
Rectangular — Laminate —
T-Mold Edge
Height
Depth
Width
Number
Price
27 1/4′′ - 45′′(692mm - 1143mm)
24′′(610mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
HURS-2436-LA
HURS-2442-LA
HURS-2448-LA
HURS-2460-LA
HURS-3036-LA
HURS-3042-LA
HURS-3048-LA
HURS-3060-LA
$2027
2054
2082
2148
$2158
2196
2226
2296
30′′(762mm)
HURS-LA
Features
To Order, Specify:
• High-pressure laminate top with 3mm T-mold edge.
• Pre-drilled for base.
• Hand crank provides 1′′(25mm) vertical movement for every
6 1/2 turns.
• Hand crank is right-handed and retracts under worksurface.
• Widths shown in nominal dimensions, actual width reduced
1′′(25mm) on each side and back to accommodate cables
and eliminate pinch points.
• Chrome glides have 3/8′′(10mm) of height adjustment.
• Grommets can be specified separately and field installed.
• Ships unassembled.
1) Product number.
2) Laminate surface color.
3) Edge trim color.
Note: Base, legs, and support brackets standard
in black.
NOTE:
Will not accept suspended drawer pedestals.
Corner — Laminate —
T-Mold Edge
27 1/4′′(692mm)- 45′′(1143mm)
24′′(610mm)
30′′(762mm)
HUCS-2436-LA
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
48′′(1219mm)
Features
To Order, Specify:
• High-pressure laminate top with 3mm T-mold edge.
• Pre-drilled for base.
• Hand crank provides 1′′(25mm) vertical movement for every
6 1/2 turns.
• Hand crank is right-handed and retracts under worksurface.
• Widths shown in nominal dimensions, actual width reduced
1′′(25mm) on each side and back to accommodate cables
and eliminate pinch points.
• Chrome glides have 3/8′′(10mm) of height adjustment.
• Grommets can be specified separately and field installed.
• Ships unassembled.
1) Product number.
NOTE:
Will not accept suspended drawer pedestals or
adjustable keyboard pads.
HUCS-2442-LA
HUCS-2448-LA
HUCS-3048-LA
368
April 2008 / USA
HUCS-2436-LA
HUCS-2442-LA
HUCS-2448-LA
HUCS-3048-LA
Class BA – SIN 711-1; Discount Group X
Canadian Conversion Factor: Refer to haworth.com/Canada
$2756
2786
2822
$2896
2) Laminate surface color.
3) Edge trim color.
Note: Base, legs, and support brackets standard
in black.
UniGroup Too Price List
Sit-to-Stand Adjustable Height Tables
PLACES
Curved Corner — Laminate —
T-Mold Edge
Height
Depth
Width
Number
Price
27 1/4′′ - 45′′(692mm - 1143mm)
24′′(610mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
48′′(1219mm)
HUCC-2436-LA
HUCC-2442-LA
HUCC-2448-LA
HUCC-3048-LA
$2756
2786
2822
$2896
30′′(762mm)
HUCC-LA
Features
To Order, Specify:
• High-pressure laminate top with 3mm T-mold edge.
• Pre-drilled for base and adjustable keyboard pad accessory.
• Hand crank provides 1′′(25mm) vertical movement for every
6 1/2 turns.
• Hand crank is right-handed and retracts under worksurface.
• Widths shown in nominal dimensions, actual width reduced
1′′(25mm) on each side and back to accommodate cables
and eliminate pinch points.
• Chrome glides have 3/8′′(10mm) of height adjustment.
• Grommets can be specified separately and field installed.
• Ships unassembled.
1) Product number.
2) Laminate surface color.
3) Edge trim color.
Note: Base, legs, and support brackets standard
in black.
NOTE:
Will not accept suspended drawer pedestals or
adjustable keyboard pads.
Split Corner — Laminate —
T-Mold Edge
HUCK-2442-LA
29′′ - 45′′(737mm - 1143mm)
27 1/4′′ - 45′′(692mm - 1143mm)
24′′(610mm)
30′′(762mm)
42′′(1067mm)
48′′(1219mm)
HUCK-2442-LA
HUCK-3048-LA
Features
To Order, Specify:
• High-pressure laminate top with 3mm T-mold edge.
• Pre-drilled for base.
• Hand crank provides 1′′(25mm) vertical movement for every
6 1/2 turns.
• Top-mounted hand crank is right-handed and removes from
worksurface.
• Widths shown in nominal dimensions, actual width reduced
1′′(25mm) on each side and back to accommodate cables
and eliminate pinch points.
• Price includes keyboard surface adjustment mechanism.
• Keyboard surface manually adjusts to any position
7′′(178mm) above and 5 3/4′′(146mm) below the back
worksurface.
• Keyboard surface tilts -5° to +9° with a locking control knob.
• Separate keyboard pad not available.
• Keyboard surface adjustment mechanism available in
charcoal finish color only.
• Chrome glides have 3/8′′(10mm) of height adjustment.
• Grommets can be specified separately and field installed.
• Ships unassembled.
1) Product number.
$3340
3474
2) Laminate surface color.
3) Edge trim color.
Note: Base, legs, and support brackets standard
in black.
HUCK-3048-LA
Class BA – SIN 711-1; Discount Group X
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
369
UniGroup Too Price List
Sit-to-Stand Fixed Height Tables
PLACES
Rectangular — Laminate —
T-Mold Edge
Height
Depth
Width
Number
Price
29′′(737mm)
24′′(610mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
60′′(1524mm)
HURS-2436-LF
HURS-2442-LF
HURS-2448-LF
HURS-2460-LF
HURS-3036-LF
HURS-3042-LF
HURS-3048-LF
HURS-3060-LF
$1763
1786
1811
1868
$1877
1909
1935
1996
30′′(762mm)
HURS-LF
Features
To Order, Specify:
•
•
•
•
•
1) Product number.
High-pressure laminate top with 3mm T-mold edge.
Pre-drilled for base.
Chrome glides have 3/8′′(10mm) of height adjustment.
Grommets can be specified separately and field installed.
Ships unassembled.
2) Laminate surface color.
3) Edge trim color.
Note: Base, legs, and support brackets standard
in black.
NOTE:
Will not accept suspended drawer pedestals.
Corner — Laminate —
T-Mold Edge
29′′(737mm)
24′′(610mm)
30′′(762mm)
HUCS-2436-LF
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
48′′(1219mm)
Features
To Order, Specify:
•
•
•
•
•
1) Product number.
High-pressure laminate top with 3mm T-mold edge.
Pre-drilled for base and adjustable keyboard pad accessory.
Chrome glides have 3/8′′(10mm) of height adjustment.
Grommets can be specified separately and field installed.
Ships unassembled.
NOTES:
Will not accept suspended drawer pedestals.
Corner table sizes 24 ′′(610mm) x 36 ′′(914mm) and
24 ′′(610mm) x 42 ′′(1067mm) will accommodate an
adjustable keyboard track length of 17 ′′(432mm) or less.
HUCS-2442-LF
HUCS-2448-LF
HUCS-3048-LF
370
April 2008 / USA
HUCS-2436-LF
HUCS-2442-LF
HUCS-2448-LF
HUCS-3048-LF
Class BA – SIN 711-1; Discount Group X
Canadian Conversion Factor: Refer to haworth.com/Canada
$2397
2422
2453
$2519
2) Laminate surface color.
3) Edge trim color.
Note: Base, legs, and support brackets standard
in black.
UniGroup Too Price List
Sit-to-Stand Fixed Height Tables
PLACES
Curved Corner — Laminate —
T-Mold Edge
Height
Depth
Width
Number
Price
29′′(737mm)
24′′(610mm)
36′′(914mm)
42′′(1067mm)
48′′(1219mm)
48′′(1219mm)
HUCC-2436-LF
HUCC-2442-LF
HUCC-2448-LF
HUCC-3048-LF
$2397
2422
2453
$2519
30′′(762mm)
Features
To Order, Specify:
•
•
•
•
•
1) Product number.
High-pressure laminate top with 3mm T-mold edge.
Pre-drilled for base and adjustable keyboard pad accessory.
Chrome glides have 3/8′′(10mm) of height adjustment.
Grommets can be specified separately and field installed.
Ships unassembled.
HUCC-LF
2) Laminate surface color.
3) Edge trim color.
Note: Base, legs, and support brackets standard
in black.
NOTES:
Will not accept suspended drawer pedestals.
Corner table sizes 24 ′′(610mm) x 36 ′′(914mm) and
24 ′′(610mm) x 42 ′′(1067mm) will accommodate an
adjustable keyboard track length of 17 ′′(432mm) or less.
Split Corner — Laminate —
T-Mold Edge
HUCK-2442-LF
29′′(737mm)
24′′(610mm)
30′′(762mm)
42′′(1067mm)
48′′(1219mm)
HUCK-2442-LF
HUCK-3048-LF
Features
To Order, Specify:
•
•
•
•
1) Product number.
•
•
•
•
•
•
High-pressure laminate top with 3mm T-mold edge.
Pre-drilled for base.
Price includes keyboard surface adjustment mechanism.
Keyboard surface manually adjusts to any position
7′′(178mm) above and 5 3/4′′(146mm) below the back
worksurface.
Keyboard surface tilts -5В° to +9В° with a locking control knob.
Separate keyboard pad not available.
Keyboard adjustment mechanism available in charcoal finish
color only.
Chrome glides have 3/8′′(10mm) of height adjustment.
Grommets can be specified separately and field installed.
Ships unassembled.
$2904
3020
2) Laminate surface color.
3) Edge trim color.
Note: Base, legs, and support brackets standard
in black.
HUCK-3048-LF
Class BA – SIN 711-11; Discount Group X
Canadian Conversion Factor: Refer to haworth.com/Canada
April 2008 / USA
371
UniGroup Too Price List
This page intentionally blank
372
April 2008 / USA
UniGroup Too Price List
Finish/Color Legend
Wood
Group
I
Veneer
Cutting
Type Variety Technique
Double
Cut
Select
African
Woods
Rift Cut
Surface
Matching
Technique
Open Pore
N/A
Grain Direction
Component
Panel Face
Face
N/A
Vertical
N/A
Wood
Group
II
Veneer
Cutting
Type Variety Technique
Surface
Matching
Technique
Horizontal
Horizontal
Horizontal
Grain Direction
Component
Panel Face
Face
Finish Name/
Color
Specification
Number
Beachwood
WL-RL(1)
Ebony
WJ-RE(1)
Mahogany Satin
VM-A
Melba
WE-RT(1)
Sorrel
WF-RC(1)
Wenge
WC-RW(1)
Finish Name/
Color
Specification
Number
Natural
Maple
Half-Round
Cut
Open Pore
Book Matched
Vertical
Vertical
Maple
VP-N
Sand on Maple
VP-AD
Natural
Cherry
Plain Sliced
Filled
Book Matched
Vertical
Vertical
Medium Cherry
VC-U
Natural
Walnut
Plain Sliced
Open Pore
Book Matched
Vertical
Vertical
Amber on Cherry
VC-CA1
Classic on Cherry
VC-83
Espresso on Walnut
VR-W15
Retro on Walnut
VR-W31
Naturally Walnut
VR-W12
Cordovan Walnut
VR-W13
Mahogany Satin
VR-W21
Because of the natural properties of wood, variations of grain pattern and finish color can be expected. Haworth carefully selects each material used in the
manufacturing of products to ensure consistent and acceptable color and finish. Wood also will change color due to lighting conditions. Haworth controls this by
using surface finishes to reduce color change. However, color change may be more evident in light-colored finishes.
Glazing Colors
SK-1C
SK-1M
SK-1E
Clear
Bronze Tint
Frosted
Glass Patterns(2)
SQ-CM
SQ-ER
SQ-VM
Checks Mix
English Reeded
Vertical Moire
X Series Pulls
Ellipse - Non-Metallic trim colors only
Radius - Metallic trim colors only
(1)
Available on Adaptable Components only.
(2)
Available on Add-on Panels only.
Available on RUSH.
April 2008 / USA
373
UniGroup Too Price List
Finish/Color Legend
UniGroup Too
Panels,
Components
UniGroup/
PLACES
Panels,
Components
UniGroup Too/
UniGroup
Laminate
Panels
Doors
Clerestory Kits
Worksurfaces,
Support
Panels
T-Mold
Edgeband
Solid Colors
Beige
TR-R
Chalk
TR-AK
Charcoal
TR-K
Graphite
TR-J
Gray Tone
TR-G
Linen
Platinum
Putty
TR-AA
Shadow (Charcoal)
Smoke
TR-E
White Sand
Metallic Colors1
Metallic Champagne
TR-MC
Metallic Gunmetal
TR-MG
Metallic Silver
TR-LE
Laminate Wood Grain Colors
Light Oak
Maple
Medium Cherry
Medium Oak
Laminate Patterned Colors
Barley Grain
Eagle Nest
Finch Nest
Grey Spex
Hops Grain
Oats Grain
Owl Nest
Quail Nest
Rhea Nest
Rice Grain
Robin Nest
Rye Grain
Wheat Grain
White Spex
Translucent - Jump Stuff
Ice (Blue)
Frost (White)
Moon (Amber)
Shadow (Charcoal)
Translucent Basic
White
Translucent Patterned
Blue
Caramel
Lime
Oyster
White
Lock Plugs
Black
Chrome
TR-R
TR-AK
TR-K
TR-J
TR-G
TR-AA
TR-E
Available on RUSH.
Check product pages for availability and upcharges.
2
Upcharge for Group II.
1
374
April 2008 / USA
H-34
H-AK
H-8J
H-3J
H-62
H-WL
H-3P
H-AA
H-34
H-AK
H-8J
H-3J
H-62
TR-R
TR-AK
TR-K
TR-J
TR-G
H-AA
TR-AA
H-3E
H-LC
H-3E
TR-E
H-33
H-8K
H-34
H-AK
H-8J
H-3J
H-62
H-WL
H-3P
H-AA
HP-34
HP-AK
HP-8J
HP-3J
HP-62
HP-WL
HP-3P
HP-AA
HP-34
HP-AK
HP-8J
HP-3J
HP-62
HP-WL
HP-3P
HP-AA
H-3E
H-LC
HP-3E
HP-LC
HP-3E
HP-LC
H-33
H-AE
H-AD
H-8K
H-DH
H-EJ
H-EL
H-22
H-DD
H-DA
H-EK
H-EC
H-ED
H-DC
H-EA
H-DF
H-DE
H-21
HP-AE
HP-AD
UniGroup Too Price List
Finish/Color Legend
Cascade
Adaptable
Component
Overhead
Storage
UniGroup
Shelf Ends
UniGroup
Flipper Doors
PLACES
Flipper Doors
X Series
V Series
Jump Stuff
Solid Colors
Beige
HP-34
Chalk
HP-AK
Charcoal
HP-8J
Graphite
HP-3J
Gray Tone
HP-62
Linen
HP-WL
Platinum
HP-3P
Putty
HP-AA
Shadow (Charcoal)
HP-LU2
Smoke
HP-3E
White Sand
HP-LC
Metallic Colors1
Metallic Champagne
Metallic Gunmetal
Metallic Silver
Laminate Wood Grain Colors
Light Oak
Maple
Medium Cherry
Medium Oak
Laminate Patterned Colors
Barley Grain
Eagle Nest
Finch Nest
Grey Spex
Hops Grain
Oats Grain
Owl Nest
Quail Nest
Rhea Nest
Rice Grain
Robin Nest
Rye Grain
Wheat Grain
White Spex
Translucent - Jump Stuff
Ice (Blue)
Frost (White)
Moon (Amber)
Shadow (Charcoal)
Translucent Basic
White
Translucent Patterned
Blue
Caramel
Lime
Oyster
White
Lock Plugs
Black
Chrome
TR-R
TR-AK
TR-K
TR-J
TR-G
V-34
V-AK
V-8J
V-3J
V-8L
H-34
H-AK
H-8J
H-3J
H-62
TR-R
TR-AK
TR-K
TR-J
TR-G
TR-R
TR-AK
TR-K
TR-J
TR-G
TR-R
TR-AK
TR-K
TR-J
TR-G
TR-AA
V-AA
H-AA
TR-AA
TR-AA
TR-AA
H-3E
V-3E
H-3E
TR-E
TR-E
TR-E
TR-MC
TR-MG
TR-LE
TR-MC
TR-MG
TR-LE
TR-MC
TR-MG
TR-LE
H-33
H-AE
H-AD
H-8K
H-AE
H-AD
H-8K
H-DH
H-EJ
H-EL
H-22
H-DD
H-DA
H-EK
H-EC
H-ED
H-DC
H-EA
H-DF
H-DE
H-21
H-DH
H-EJ
H-EL
H-22
H-DD
H-DA
H-EK
H-EC
H-ED
H-DC
H-EA
H-DF
H-DE
H-21
TR-MC
TR-MG
TR-LE
TR-LX
TR-LQ
TR-LY
TR-LU
P8-AW
P8-AW
P8-PB
P8-PA
P8-PL
P8-PY
P8-PW
P8-PB
P8-PA
P8-PL
P8-PY
P8-PW
LR-BL
LR-BP
LR-BL
LR-BP
LR-BL
LR-BP
Available on RUSH.
Check product pages for availability and upcharges.
2
Upcharge for Group II.
1
April 2008 / USA
375
UniGroup Too Price List
Systems Fabrics/Color Legend
• Fabrics listed on this page apply to all UniGroup Too,
UniGroup and PLACES upholstered products. Exceptions
will be noted on the price chart pages.
(1)
Fabric/colorway not available on basic monolithic
fabric surface panels.
(2)
Shimmer is available only on UniGroup Too Inserts,
tackboards, or tack strips.
(3)
Tellure is available only on tackboards or tack strips.
Fabric/colorway available on RUSH.
†Fabric pattern available on Start It Up at standard lead
time.
Fabric Grade: A d
IOWA (1410-1328) †100% Recycled Polyester
FZ-10 Badger
FZ-6
Bixby
FZ-3
Bobwhite
FZ-2
Cedar Rock
FZ-11 Clear Lake
FZ-13 Emerson
FZ-7
Gar
FZ-9
Honeycreek
FZ-1
Manawa
FZ-5
Rice Lake
FZ-4
Trappers Bay
FZ-12 Walnut Woods
FZ-8
Wapello
Fabric Grade: A d
OHIO (1410-1329)
100% Recycled Polyester
FQ-11 Blue Rock
FQ-5
Crane Creek
FQ-1
Dillon
FQ-6
Erie
FQ-9
Garfield
FQ-4
Geneva
FQ-2
Liberty
FQ-7
Magee Marsh
FQ-12 Maumee
FQ-3
O.H. Ten
FQ-10 Quail
FQ-8
Sycamore
Fabric Grade: A
POINT (4322-6312)
100% Virgin Polyester
EE-0AG Compass
EE-0AC Decimal
EE-0AF Focal
EE-0AD Nib
EE-0AA Peak
EE-0AE Vertex
Fabric Grade: A d
SAVOY (4320-6501) †100% Polyester
FJ-CC Apache
FJ-AD Balsam
FJ-AP Bisque
FJ-AE Blue Ridge
FJ-AA Blue Willow
FJ-CA Breaker
FJ-AR Chamois
FJ-AK Elephant
FJ-AL Glacier
FJ-AX Mango
FJ-AY Maya
FJ-AW Poplar
FJ-CD Raisen
FJ-AT Shallot
FJ-AM Stainless
FJ-AF Tempest
376
April 2008 / USA
Fabric Grade: A d
STRIAE (4321-9315) †100% Recycled Polyester Terratex®
C1-AJ Beam
C1-AM Band
C1-AH Element
C1-AF Fillet
C1-AC Moonlight
C1-AE Ray
C1-AK Ribbons
C1-AD Straws
C1-AA Stream
C1-AL Trace
Fabric Grade: A d
TACCATA (4320-6601)
100% Polyester
FL-AK Alpaca
FL-AD Confederate
FL-AH Dill(1)
FL-AE Gherkin(1)
FL-AP Harmonic
FL-AM Mercury
FL-AA Montego (1)
FL-AF Morning Glory
FL-AR Opus
FL-AJ Sepia
FL-AL Smokewood
FL-AN Stone Mountain
FL-AT Timbre
Fabric Grade: A d
TATAMI(1) (1410-1325) †100% Polyester
W5-1
Agave
W5-2
Coir
W5-3
Geta
W5-4
Hemp
W5-5
Jute
W5-6
Kayar
W5-7
Kobe
W5-8
Saffron
W5-9
Sapporo
W5-10 Sisal
W5-12 Tabi
W5-11 Tesori
• To obtain fabric samples contact your
authorized Haworth dealer.
• Fabric part numbers shown in parenthesis
can be used to order fabric only.
• All fabrics except Tellure are 66′′ wide.
Tellure is 54′′ wide.
d = Directional fabric
n = Non-directional fabric
Fabric Grade: A n
TELLURE(3) (4320-1315) †100% Polyester
3A-18 Black
3A-29 Brick
3A-20 Burgundy
3A-11 Cactus
3A-14 Copperwood
3A-28 Dynamo
3A-22 Galaxy
3A-09 Gray
3A-10 Green Moss
3A-21 Imperial
3A-23 Jodhpurs
3A-16 Lake
3A-25 Napa
3A-19 Navy
3A-06 Nickel
3A-04 Plum
3A-17 Prussian
3A-02 Salmon
3A-15 Sandstone
3A-24 Sheik
3A-27 Sweet Pea
3A-05 Teal
3A-26 Zen
Fabric Grade: A
ZIG ZAG (4322-6703)
100% Virgin Polyester
EF-0AA Chevron
EF-0AD Corkscrew
EF-0AC Ric Rac
EF-0AE Serpentine
EF-0AF Wiggle
Fabric Grade: B n
BASKETWEAVE (1410-1000) †100% Recycled Polyester
F-6K
Baby Blue
F-7M
Birch
F-7J
Buff
F-AL
Feather Blue
F-AJ
Feather Gray
F-6J
French Blue
F-2E
Ivory
F-EA
Natural
F-ED
Orchid
F-EC
Oyster
F-AF
Parchment
F-AH
Soft Lavender
F-JX
Sterling
F-EH
Verdigris
Fabric Grade: B d
BISCOTTI (4320-6701) †60% Polyester, 40% Olefin
FN-AJ Atlantis
FN-AE Copper
FN-AW Curry
FN-AT Fig
FN-AL Fresco
FN-AX Icing
FN-AR Macaroon
FN-AF Maize
FN-AG Opal Gray
FN-AD Pesto
FN-AC Phoenician
FN-AH Sea Spray
FN-AA Shark
FN-AN Silver Ash
FN-AP Torte
FN-AM Wafer
Fabric Grade: B d
KIO (4321-9313) †100% Recycled Polyester Terratex®
ZR-6
Bennett
ZR-8
Cascade
ZR-7
Crew
ZR-5
FUD
ZR-3
Jeanlin
ZR-1
Jib
ZR-11 Reeds Lake
ZR-13 Regatta
ZR-10 Sailor
ZR-2
Sentra
ZR-12 Smurf
ZR-9
TSJ
ZR-4
Yippi Kio
Fabric Grade: B d
LANDSCAPE (4321-9316) †100% Recycled Polyester Terratex®
C2-AD Estate
C2-AH Harvest
C2-AJ Panorama
C2-AF Parkland
C2-AC Photograph
C2-AE Seascape
C2-AA Vista
Fabric Grade: B
SENZA (4322-5901)
100% Eco Intelligent Polyester
MBDC Technical Nutrient
R9-0AA Bare
R9-0AM Barefoot
R9-0AK Calm
R9-0AE Casual
R9-0AN Dare
R9-0AL Flirt
R9-0AF Natural
R9-0AG Surprise
R9-0AH Whisper
UniGroup Too Price List
Systems Fabrics/Color Legend
Fabric Grade: B d
SHIMMER(2) (4321-9309) †100% Recycled Polyester
WS-5
Cellophane
WS-8
Copper
WS-13 Dew
WS-14 Diamond
WS-9
Flaxen
WS-4
Gems
WS-11 Glass
WS-1
Glitter
WS-10 Mirage
WS-16 Mirror
WS-2
Moonlight
WS-6
Puddle
WS-15 Reflection
WS-12 Stars
WS-3
Water
WS-7
Wet Grass
Fabric Grade: B d
TRAFFIC (4321-9310)
100% Recycled Polyester
WZ-9
Autobon
WZ-6
Country Drive
WZ-7
Freeway
WZ-5
Gridlock
WZ-1
Jam
WZ-3
Merge
WZ-8
Route 66
WZ-4
Ticket
WZ-2
Yield
Fabric Grade: B d
TRAX (4321-9312)
100% Recycled Polyester
W9-8
Back
W9-5
Cover Your
W9-2
Eight
W9-4
Field
W9-6
Railroad
W9-1
Sand
W9-7
Tire
W9-3
Trolley
Fabric Grade: B d
VERONA (4320-8801) †86% Polyester,
14% Olefin
SF-AL Argento
SF-AP Ciao
SF-AM Ferra
SF-AJ Gesso
SF-AA Lido
SF-AR Luna
SF-AC Mezzo
SF-AN Piazza
SF-AW Puzzo
SF-AT Roma
SF-AK Strada
SF-AE Tosta
Fabric Grade: B d
VINES(1) (1410-1331) †100% Recycled Polyester
FX-10 Arbor
FX-8
Clematis
FX-11 Dewberry
FX-12 Grape
FX-2
Greenbrier
FX-5
Honeysuckle
FX-1
Hop
FX-7
Jasmine
FX-3
Liana
FX-9
Pergola
FX-6
Trumpet Creeper
FX-4
Wey
Fabric Grade: C d
GLIMMER (4322-7004)
100% Polyester
2C-008 Acknowledge
2C-003 Allude
2C-002 Murmur
2C-007 Omen
2C-006 Reply
2C-004 Tidal
2C-005 Vibe
2C-001 Winter
Fabric Grade: C d
MAYPOLE (4322-7007)
100% Polyester
2D-004 Reed
2D-003 Rush
2D-006 Sway
2D-001 Tone
2D-005 Twirl
2D-002 Waver
Fabric Grade: C d
MIRAGE (4321-9317)
100% Recycled Polyester
C3-AF
Aura
C3-AE
Dream
C3-AC
Ghost
C3-AK
Illusion
C3-AJ
Oasis
C3-AH
Pool
C3-AD
Reflection
C3-AA
Visage
Fabric Grade: C d
POTTER (4321-9311)
100% Recycled Polyester
W8-9
Clay
W8-3
Coilpot
W8-4
Earthenware
W8-8
Glaze
W8-10 Kick Wheel
W8-6
Kiln
W8-5
Slip
W8-2
Sponge
W8-1
Stoneware
W8-7
Vessel
Fabric Grade: C d
PRING (4321-9318)
100% Recycled Polyester Terratex
C5-AL Dew Drops
C5-AC Dribble
C5-AF Drizzle
C5-AD Droplets
C5-AJ Fling
C5-AH Mist
C5-AK Pour
C5-AE Spill
C5-AM Splatter
C5-AA Spray
C5-AN Sprinkle
Fabric Grade: D d
CIRQUE (4321-9319)
100% Recycled Polyester TerratexВ®
C7-AD Cordon
C7-AJ Crown
C7-AF Equator
C7-AE Globe
C7-AK Halo
C7-AH LP
C7-AL Orbit
C7-AM Ringlet
C7-AC Tire
C7-AA Wreath
Fabric Grade: D d
FURROW (4321-9320)
100% Recycled Polyester TerratexВ®
C6-AD Canal
C6-AM Channel
C6-AA Corrugation
C6-AE Ditch
C6-AL Flute
C6-AJ Groove
C6-AN Gully
C6-AF Pleat
C6-AC Ridge
C6-AH Rut
C6-AK Trench
Haworth+
For information on the Haworth+ alliance program, including
images and product availability, please refer to:
Haworth.com > Surface Collection > Haworth+ Library
ALERT: These materials are
current, however they are being
considered for future obsolescence
due to low volume.
Fabric Grade: B d
KAVALLA (4320-8701) †81% Polyester, 19% Olefin
SE-AP Bella
SE-AA Carrara
SE-AL Grotto
SE-AN Kava
SE-AE Latte
SE-AJ Nuvolo
SE-AM Tempestra
SE-AC Travertine
SE-AK Trisco
d
Fabric Grade: C
SCARPA (1410-1323)
100% Polyester
S5-AC Ceramic
S5-AE Losa
S5-AK Mattonella
S5-AJ Pavestone
S5-AH Pottery
S5-AA Slip
S5-AF Tegolo
S5-AD Tessalate
Fabric Grade: C d
SILK TWEED (4320-1301) †96% Polyester, 4% Silk
FS-MH Ashen
FS-MY Canvas
FS-MC Delft
FS-MT Fawn
FS-MF Flax
FS-MV Gryphon
FS-MA Ivy
FS-MM Meadow
FS-ML Oatmeal
FS-MN Pale Juniper
FS-MJ Pepper
FS-MD Plum
Fabric Grade: C d
WHORL (1410-1321) †100% Polyester
S9-AF Cirque
S9-AM Collapsak
S9-AC Filigree
S9-AL Mirage
S9-AA Nymph
S9-AP Orbit
S9-AK Pool
S9-AE Radii
S9-AH Raindrops
S9-AN Rip Tide
S9-AJ Shimmer
S9-AD Volute
Customer’s Own Material (COM)
For general Customer’s Own Material (COM) information
including processes and forms, please refer to:
Haworth.com > Surface Collection > Resources > COM
For information on approved COM’s, please refer to:
Haworth.com > Surface Collection > COM Library
April 2008 / USA
377
UniGroup Too Price List
Seating Fabrics/Color Legend
• The following fabrics are available on the X Series Pedestal
Cushion Kit and 1-high Bench.
Fabric Grade: A
ESOTERIA
56% Nylon,
44% Polyester
3H-17 Amulet
3H-14 Antares
3H-16 Borealis
3H-06 Celestial
3H-01 Cryptic
3H-22 Draco
3H-15 Enigma
3H-02 Estuary
3H-09 Ethereal
3H-21 Mantra
3H-11 Scirroco
3H-19 Shiva
3H-18 Tarot
3H-20 Vedic
3H-05 Visage
Fabric Grade: A
GAUGE
100% Recycled Polyester
1X-005 Depth
1X-004 Gas
1X-011 Narrow
1X-008 Pressure
1X-002 Rain
1X-012 Sea
1X-013 Standard
1X-010 Test
1X-003 Time
1X-009 Water
1X-006 Weather
1X-001 Wind
1X-007 Wire
Fabric Grade: A d
HORIZON
60% Acrylic,
40% Polyester
1N-001 Beeline
1N-004 Birdseye
1N-003 Border
1N-002 Compass
1N-005 Panorama
1N-008 Skyline
1N-006 Sweep
1N-007 Vista
Fabric Grade: A d
ICON
66% Acrylic,
34% Recycled Polyester
IC-7
Argon
IC-6
Carbon
IC-1
Chlorine
IC-5
Cobalt
IC-2
Copper
IC-12
Fluorine
IC-3
Helium
IC-13
Iodine
IC-10
Mercury
IC-9
Phosphorous
IC-8
Sulfur
IC-11
Wolfram
IC-4
Zinc
378
April 2008 / USA
Fabric Grade: A
INTERVAL
56% Nylon
44% Polyester
3F-03 Adrian
3F-08 Bayou
3F-17 Binary
3F-06 Carnelian
3F-16 Charm
3F-12 Chimera
3F-18 Echo
3F-14 Flaxen
3F-01 Mink
3F-13 Nutra
3F-02 Polaris
3F-19 Realis
3F-15 Tarium
Fabric Grade: A d
MOODRING
100% Recycled Polyester
NQ-2
Blue Moon
NQ-4
Calm
NQ-3
Cool
NQ-7
Easy
NQ-9
Envy
NQ-8
Joy
NQ-10 Liberate
NQ-5
Magic
NQ-12 Mello
NQ-6
Terrestrial
NQ-11 Tranquil
NQ-1
Tripp
Fabric Grade: A
RAVENNA
56% Nylon,
44% Polyester
3E-15 Aqua Marine
3E-02 Azurite
3E-17 Basalt
3E-19 Jade
3E-18 Lode
3E-01 Marquetry
3E-04 Melange
3E-12 Omnium
3E-14 Oolite
3E-05 Pastiche
3E-07 Pietra
3E-16 Sinter
3E-08 Tesserae
Fabric Grade: A d
SQUARZ
60% Recycled Polyester,
40% Rayon
1R-003 Boxy
1R-005 Checkers
1R-006 Chess
1R-010 Cinder Blocks
1R-002 Hopscotch
1R-009 Ice Cube
1R-007 Square Dance
1R-008 Square Pants
1R-004 T-Square
1R-001 What A Square
Fabric Grade: A
WICKER
100% Polyester
1Y-006 Balloon
1Y-001 Bushel
1Y-005 Corf
1Y-003 Gondola
1Y-007 Hive
1Y-004 Oxford
1Y-002 Wisket
d
Fabric Grade: A
TELLURE
100% Polyester
3A-18 Black
3A-29 Brick
3A-20 Burgundy
3A-11 Cactus
3A-14 Copperwood
3A-28 Dynamo
3A-22 Galaxy
3A-09 Gray
3A-10 Green Moss
3A-21 Imperial
3A-23 Jodhpurs
3A-16 Lake
3A-25 Napa
3A-19 Navy
3A-06 Nickel
3A-04 Plum
3A-17 Prussian
3A-02 Salmon
3A-15 Sandstone
3A-24 Sheik
3A-27 Sweet Pea
3A-05 Teal
3A-26 Zen
Fabric Grade: A d
ZINGER
70% Polyester, 30% Acrylic
NI-2
BBQ
NI-17
Beluga
NI-10
Blue Gill
NI-8
Chips
NI-11
Classic
NI-16
Concord
NI-13
Frog
NI-15
Glade
NI-9
Grain
NI-12
Granny
NI-4
Gravel
NI-18
Kiwi
NI-20
Mulberry
NI-3
Onion
NI-6
Pacific
NI-1
Roan
NI-21
Tar
NI-7
Wagon
NI-19
Wicker
NI-5
Wolf
Fabric Grade: B
ARBOREA
55% Cotton, 45% Polyester
TA-704 Amaretto
TA-710 Aubergine
TA-709 Bleu Marine
TA-702 Champagne
TA-706 Emeraude
TA-701 French Lace
TA-705 Praline
TA-708 Riviera
TA-700 Rouge
TA-707 Sarcelle
TA-703 Silver Pine
Fabric Grade: B d
COCKTAIL
100% Eco
Intelligent Polyester
MBDC Technical Nutrient
1W-012 Black Car
1W-008 Blue Moon
1W-013 Boilermaker
1W-001 Bubbly
1W-003 Gibson
1W-004 Grasshopper
1W-007 Lounge
1W-016 Margarita
1W-010 Martini
1W-014 Mojito
1W-011 Old Fashion
1W-006 Pink Squirrel
1W-015 Sidecar
1W-009 Stinger
1W-002 Stout
1W-005 Swizzle
Fabric Grade: B d
HERRINGBONE
85% Nylon, 15% Polyester
TZ-2
Beef Stew
TZ-16 Beet
TZ-6
Cinder
TZ-7
Gator
TZ-8
Crock
TZ-10 Dandelion
TZ-12 Field Lily
TZ-5
Freighter
TZ-13 Habanero
TZ-4
Haze
TZ-15 Pansy
TZ-9
Peek a Blue
TZ-1
Prairie
TZ-11 Ray
TZ-14 Seal
TZ-3
Water
UniGroup Too Price List
Seating Fabrics/Color Legend
Fabric Grade: B d
LINE UP
100% Recycled Polyester
LU-8
10 Hut
LU-2
First String
LU-10 Fall In
LU-3
In A Row
LU-4
Line Drive
LU-1
Police
LU-6
Rockets
LU-7
Single File
LU-9
Stars
LU-5
Traffic
Fabric Grade: B
SLINKEE
100% Recycled Polyester
Terratex
1M-003 Boing
1M-001 Coil
1M-010 Corkscrew
1M-005 Fiddlehead
1M-009 Helix
1M-004 Rotini
1M-012 Spiral
1M-002 Spring
1M-008 Swirl
1M-006 Tendril
1M-007 Twister
1M-013 Vortex
1M-011 Whirlpool
Fabric Grade: C
CASHMERE VINYL
100% Polyvinyl Chloride
XH-001 Acorn
XH-002 Chestnut
XH-003 Clay
XH-005 Fennel
XH-007 Heather
XH-008 Ocean
XH-009 Olive
XH-010 Pool
XH-011 Raspberry
XH-012 Straw
XH-014 Wine
XH-015 Yacht
Fabric Grade: C d
KARAKUL
100% Recycled Polyester
1P-008 Coil
1P-007 Curl
1P-004 French Knots
1P-005 Kink
1P-001 Knobby
1P-002 Loopy
1P-009 Poodle
1P-006 Terry
1P-003 Wooly
Fabric Grade: C
MAX VINYL
100% Polyvinyl Chloride
XD-007 Appletini
XD-005 Champagne
XD-001 Coquito
XD-010 Fizz
XD-006 Limeade
XD-002 Malt
XD-013 Margarita
XD-009 Mimosa
XD-016 Razzputin
XD-003 Rum
XD-015 Sangria
XD-011 Tonic
Fabric Grade: D d
WUHL
100% Wool
MBDC Biological Nutrient
1T-016 Black
1T-001 Buckskin
1T-002 Chaps
1T-015 Charcoal Flannel
1T-010 Fern
1T-007 Geranium
1T-014 Grey Flannel
1T-011 Hyacinth
1T-005 Maize
1T-012 Marine
1T-003 Mesquite
1T-008 Peony
1T-004 Rainforest
1T-009 Reef
1T-006 Squash
1T-013 Walnut
Haworth+
For information on the Haworth+ alliance program, including
images and product availability, please refer to:
Haworth.com > Surface Collection > Haworth+ Library
Customer’s Own Material (COM)
For general Customer’s Own Material (COM) information
including processes and forms, please refer to:
Haworth.com > Surface Collection > Resources > COM
For information on approved COM’s, please refer to:
Haworth.com > Surface Collection > COM Library
April 2008 / USA
379
UniGroup Too Price List
North American Terms of Sale
These Terms of Sale are part of a quotation,
bid response, or other sales document
issued by Haworth, Inc., Haworth, Ltd.
(��Haworth’’).
These Terms of Sale do not cover products
manufactured in North America shipping to
non-North American countries nor do they
cover products manufactured in non-North
American countries shipping to North
America. For those terms of sale, please
contact Haworth’s Global Trade and
Compliance Department at 616.393.3000 or
through Haworth.com.
A. Ordering Information
Haworth sells its products on the terms set forth
in these standard Terms of Sale:
ORDERS MUST BE SUBMITTED IN WRITING
OR ELECTRONICALLY (OrderLine) AS
REPRESENTED BY A VALID PURCHASE
ORDER, WHICH INCLUDES PRODUCT
TOTAL.
An order is not binding upon Haworth until
Haworth issues an order acknowledgment to the
customer (the ��Customer’’), which will include
price information and an anticipated shipping
date.
1. Order Changes/Cancellations
For Specials, Customer’s Own Material
(C.O.M.), finish matches, custom colors, custom
products and RUSH orders, no changes or
cancellations are allowed. All other products
require approval for changes or cancellations.
A change/cancellation fee will apply. Contact
Order Services for applicable charges.
Ship-to addresses changed within five (5)
business days of shipment will incur fees to
cover administrative costs due to re-labeling of
product and/or reconsignment fees with the
carrier.
Order cancellations are complete annulments of
orders. Order changes are the deletion of line
items or a change in size, color, quantity, ship-to
address, or scope of work. There is no penalty
for additions; however, any change may cause
the order or the line items affected to be
rescheduled. Order changes involving additional
product and services which increase the value
must be accompanied by an amended Purchase
Order or other document as agreed.
ALL CHANGES MUST BE IN WRITING,
REGARDLESS OF THE (DOLLAR) VALUE.
CHANGES ARE NOT BINDING UPON
HAWORTH UNTIL HAWORTH ISSUES AN
ACKNOWLEDGMENT OF THE CHANGE.
2. C.O.M. (Customer’s Own Material)
A Customer who requests a fabric, surface or
finish material (C.O.M.) not in Haworth’s
standard finish offering must first confirm
approval of or request new approval for the
C.O.M.
380
April 2008 / USA
Haworth will determine feasibility of the material
for manufacturability. For a description of the
procedure to submit C.O.M. samples, contact
Haworth’s Order Services department. For
testing information, see the C.O.M. section of
the catalog, or call Haworth Order Services.
If Haworth agrees to use the C.O.M., (1)
Haworth shall have no responsibility for the
condition, quality, value, performance, physical
properties, or any other aspect of the C.O.M.;
and (2) Haworth shall have no liability for any
damages, injuries, or losses to the Customer or
to any third party that shall be caused by any
C.O.M., and the Customer shall hold Haworth
harmless for all such liability.
3. Valid/Complete Purchase Order
The following information is required in order to
process an order with Haworth:
a. Customer Information
i. Sold To: Legal name, complete address
(if Haworth is to bill the end user, provide
end user Purchase Order made out to
Haworth, Inc., Haworth, Ltd.) and phone
and fax number.
ii.
Ship To: Legal name and address.
iii. Purchase Order Number: From the party
Haworth will be billing.
iv. Authorized Signature: All Purchase
Orders must be signed by a duly
authorized representative if a signature line
is present. Electronically transmitted
Purchase Orders will be accepted without
a signature if dealer billed and the dealer
has an electronic purchase payment
agreement on file.
v.
Contact Name and Phone Number:
Person Haworth should contact with any
questions regarding the order.
vi. Shipping Contact: Name and phone
number of person to be contacted
regarding shipping and delivery matters.
vii. Tagging Instructions: This information
will appear on all documentation received
from Haworth including: cartons,
acknowledgments, and invoices. Normally
1 tag is allowed per $8,000.
viii. Price Agreement or National Sales
Agreement Number
ix. Product Total: Net dollars.
x.
Installation, Design, Project
Management, and/or Service Fees
b. Product Information
i. Quantity
ii.
Product Numbers
iii. Colors
iv. Specials: Specify Inquiry and line number
for new special products.
v.
Customer’s Own Material: Order entry
code, manufacturer, pattern, color, and
who is ordering the C.O.M. fabric
(Haworth, dealer or the Customer).
vi.
Approval Drawings: An authorized
signature by a duly authorized
representative is required for shop
drawings when applicable.
vii. A deposit may be required for custom
materials.
c. Order Confirmation
All orders will be acknowledged.
B. Pricing Policies
1. Terms of Payment
Terms of payment and credit limits will be
established based on financial information.
Standard payment terms on open credit are net
thirty (30) days from invoice date. Advance
payments or other payment security may be
required by Haworth. The account balance must
be at or below the credit limit and current at all
times (no past-due balances). Haworth reserves
the right to delay or cancel any shipment to a
Customer whose Haworth account balance is
over the credit limit and/or past due. For walls
and floors a deposit will be required.
2. Terms of Credit
Customer hereby authorizes Haworth to obtain
such credit reports, financial information or other
information as Haworth may request, including,
without limitation, credit information from any
financial institutions or others having a business
relationship with the Customer. Customer
hereby authorizes any credit references to
answer Haworth’s inquiries and provide such
credit information and documentation as
Haworth may request.
The Customer hereby releases and holds
Haworth harmless for any inconvenience
whatsoever, caused by any temporary or
permanent withdrawal or restriction of credit
privileges hereunder, or the enforcement of any
of the provisions contained in this paragraph.
3. Past-Due Charges
Past-due balances will be increased by a
maximum of 1.5% per month, or 18% annually,
without forfeit of Haworth’s right to immediate
payment.
4. Applicable Prices
Prices and discounts are subject to change
without notice or approval. In the event of an
adjustment to pricing, National Sales Agreement
(NSA) Customers will be notified in advance
according to the terms of the NSA.
Applicable prices are those in effect at the time
of the RECEIPT of an order; Haworth reserves
the right to use the published pricing effective at
the time of shipment, if the requested shipping
date is more than 120 days after the order
receipt date.
UniGroup Too Price List
North American Terms of Sale
The price of any product sold to Customer by
Haworth will be based upon the price for the
products as follows:
Destination
Price List (��Catalog’’)
U.S.A.
U.S.A.
Canada
Canadian
Mexico
U.S.A.
5. Taxes
a. U.S.A.: Haworth prices do not include any
sales, use or similar taxes. The Customer is
responsible to remit directly to Haworth all such
taxes when invoiced.
b. Canada: Prices listed in the Canadian
catalogs include applicable customs duty. Prices
do not include the Federal Goods and Services
Tax or any provincial or other sales taxes. Any
federal, provincial or other taxes or assessments
based upon the sale or shipment of products or
services sold applicable to the Customer at
present or later imposed by federal, provincial or
municipal agencies, shall be added and paid by
the Customer.
c. Mexico: Prices listed in the U.S.A. catalogs
do not include customs duty, value added or any
other tax with respect to the sale, use,
ownership, or value of any product or service
provided by Haworth. Customer is responsible
for all such taxes.
NOTE: For all countries a valid sales tax
exemption certificate must be approved by and
on file with Haworth prior to product shipment.
Otherwise, sales tax will be due and payable to
Haworth when such tax is invoiced to Customer.
6. Services
If, as a result of Customer request, the Haworth
dealer or Haworth subsidiary provides planning/
design services, storage, project management,
special handling, set-up, installation and/or other
services, the Customer will be charged at the
local Haworth dealer/subsidiary’s prevailing
rates.
7. Termination by Haworth
Haworth may immediately terminate an order
upon written notice in the event bankruptcy or
insolvency proceedings are instituted by or
against the Customer, or the Customer is
adjudicated as bankrupt, becomes insolvent,
makes an assignment for the benefit of
creditors, or proposes or makes any
arrangements for the liquidation of its debts, or a
receiver or receiver and manager is appointed
with respect to all or any part of the assets of the
Customer.
C. Shipping and Delivery
Haworth will have the right to determine the
method of shipment and routing of product.
This section does not apply to Haworth’s
TecCrete or TecFlor products. TecCrete and
TecFlor are sold freight collect.
If, for any reason, a delivery has to be made to
an intermediate location (i.e. a location other
than the ��Ship To’’ location noted on the order
or ultimate end user location), all handling and
re-delivery costs incurred would be at the
Customer’s expense.
1. U.S.A. - Contiguous
All deliveries will be F.O.B. (U.C.C./2-319)
Haworth’s manufacturing facilities or distribution
centers. Freight charges will be prepaid by
Haworth on all orders to locations within the
continental United States. Customer bears all
risk of loss or damage to the goods when they
are placed on Haworth’s means of transport.
2. U.S.A. - Non-contiguous (Alaska, Hawaii
and Puerto Rico)
All deliveries will be CIF (U.C.C./2-320) (Cost of
Goods, Insurance and Freight). Haworth’s
catalog prices include ocean freight and
insurance to the port of the final destination.
Haworth has the right to determine the carrier,
method of shipment and routing. Haworth will
contract with the insurer and provide minimal
insurance coverage (CIF @ 110%) made
payable to the Customer. Customer is
responsible to obtain greater insurance if so
desired.
Customer bears all risk of loss or damage to the
goods when the goods are effectively at the
disposal of the Customer on board the vessel at
the named port of destination. Proof of delivery
is a clean on board bill of lading. Customer will
be responsible for all on-carriage from the
receiving port to the final destination.
3. Canada
All deliveries will be F.O.B. Destination
(U.C.C./2-319). Haworth’s catalog prices include
delivery to Customer’s named place, not
unloaded from any arriving means of transport.
Customer bears all risk of loss or damage to the
goods when they are delivered to the
Customer’s named facility not unloaded.
Haworth will assume responsibility to file all
freight claims with the carrier for any
loss/damage which may occur while product is
in transit, and will promptly repair or replace any
damaged or lost product. Haworth requires the
Customer to report all freight damage and/or
loss to both the carrier and to Haworth.
NOTE: Under all shipping terms (U.S.A. and
Canada), any additional expense resulting from
Customer’s request for expedited transportation,
special services, packaging, handling, routing,
and/or shipping method will be billed to
Customer.
4. Mexico
All deliveries will be DAF (Delivered at Frontier)
(ICC Incoterms 2000). Haworth’s catalog prices
include freight charges for normal surface
transportation to a United States point of
exportation within the 48 contiguous states.
Haworth has the right to determine the carrier,
method of shipment and routing.
Customer bears all risk of loss or damage to the
goods when the goods are delivered to the
named United States point of exportation.
Haworth will provide customs clearance
facilitation and arrangement of local delivery
through an Authorized Dealer in Mexico, on a
separately negotiated basis. Otherwise the
Customer will be responsible for all customs
clearance formalities and on-carriage from the
United States point of exportation to the final
destination in Mexico.
5. Ship Dates and Delay
If Haworth cannot ship products as scheduled
due to causes beyond its reasonable control
(such as casualty, labor disputes, or accident;
inability to obtain necessary labor, material or
transportation; or changes requested by the
Customer), the ship date will be extended to
compensate for the delay as determined by
Haworth.
6. Delivery Shortages and Damage
Product shortages and damage must be noted
on delivery receipts at the time of delivery and
reported to the carrier for correction.
Claims against Haworth for shortages, errors, or
damage must be made within three (3) days of
the date of delivery or the Customer waives the
right to make such a claim. Signed Bill of
Ladings or Delivery Receipt must be sent in with
claims.
7. Storage
Haworth may transfer product to storage at the
Customer’s risk and expense if the Customer is
unable or unwilling to take delivery of product as
originally scheduled. Upon such transfer to
storage, the Customer assumes risk of loss.
Haworth will invoice the Customer for storage
fees and the Customer will make payments in
accordance with Haworth’s standard payment
terms.
D. General Terms
1. Governing Law
For products purchased for delivery in the U.S.
pursuant hereto, this Agreement shall be
governed by and construed according to the
laws of the State of Michigan. Where Products
are purchased for delivery in Canada pursuant
hereto, this Agreement shall be governed by
and construed according to the laws of the
Province of Alberta. In either case, the parties
attorn to the exclusive jurisdiction of the courts
of Michigan and Alberta, respectively for the
purpose of hearing any disputes arising under
this Agreement or with respect to any Products
sold pursuant hereto, and agree that the
provisions of the United Nations Convention on
Contracts for the International Sale of Goods
and any other provision or law which would have
the effect of applying the laws of any jurisdiction
other than Michigan or Alberta, as the case may
be, shall be excluded.
April 2008 / USA
381
UniGroup Too Price List
North American Terms of Sale
2. Force Majeure
In the event that the performance of Customer
or Haworth or its participating dealer assignee(s)
would be prevented, restricted, interfered with or
rendered commercially impracticable by reason
of Force Majeure, then upon the giving of notice
to the other parties, the party affected by the
Force Majeure shall be excused from performing
hereunder until the Force Majeure no longer
prevents, restricts, interferes with, or renders
such performance commercially impracticable.
��Force Majeure’’ shall mean: fire, explosion,
breakdown of plant, epidemic, hailstorm,
snow/ice storms en route, hurricane, tornado,
cyclone, flood or power failure; war, revolution,
civil or military disturbances, acts of public
enemies, acts of terrorism, blockade or
embargo; any law, order, proclamation,
regulation, ordinance, demand or requirement of
any applicable governmental authority or any
subdivision, authority, or representative of any
such government; labor difficulties, including
without limitation, strikes, slowdowns, picketing
or boycotts; or difficulties beyond Haworth’s
reasonable control in obtaining necessary raw
materials, labor, fuels and electric power,
components or facilities, and any other
circumstances beyond the control of the party
affected.
3. Delays by Customer
Where Haworth has not received adequate site
dimensions, Product specifications, shipping
information, installation particulars or other
info

ProWood Project Plan - How to Build a Planter Box - Universal

ULTRA RT5/6 and RT6 Gimbal LED - Osram Sylvania

Make Office Party Menu, Clam Bake, Pig Roasts Hourderves

Obama Announces $240 Million in New Pledges for STEM Education

WHAT: A collection of fun, interactive exhibits of all things Science

Robatech 30T | 1991