ASSOCIAZIONE NAZIONALE MECCANICA - GIMC

ASSOCIAZIONE NAZIONALE MECCANICA
TEORICA E APPLICATA
PROGRAMMA DEI LAVORI
XX Convegno Nazionale di Meccanica Computazionale
VII Riunione del Gruppo Materiali AIMETA
UNIVERSITA’ DEGLI STUDI DI CASSINO
E DEL LAZIO MERIDIONALE
DIPARTIMENTO DI INGEGNERIA
CIVILE E MECCANICA
Cassino 11 – 13 giugno 2014
www.gimc-gma2014.dicam.unibo.it
Programma dei lavori GIMC
10‐giu 17:00 19:00 Registrazione
11‐giu 08:00 09:00 Registrazione
09:00 10:00 Apertura Convegno
Saluti del Prof. Ciro Attaianese, Rettore dell'Università di Cassino e del Lazio Meridionale
Saluti del Prof. Marco Dell'Isola, Direttore del Dipartimento di Ingegneria Civile e Meccanica
10:00 11:00
Sessione GIMC1: Chairman Anna Pandolfi
Francesco Tornabene, Nicholas Fantuzzi, Michele Bacciocchi
The Strong Formulation Finite Element Method: Stability and Accuracy
Giacomo Maurelli, Nadia Maini, Paolo Venini
Mixed methods for viscoelastodynamics and topology optimization
S. de Miranda, A. Madeo, D. Melchionda, F. Ubertini
A GBT finite element based on elastic solution
Giovanni Castellazzi, Daniela Ciancio, Francesco Ubertini
On the accuracy of the nodal elastic stress of zero thickness interface elements
11:00 11:30
11:30 13:00
Coffee break
Sessione GIMC2: Chairman Ferdinando Auricchio
Francesco Marmo, Luciano Rosati
Analytical evaluation of displacement and stress fields induced in elastic half‐spaces by linear distributions of pressure on the surface
S. Terravecchia, T. Panzeca, C. Polizzotto
Strain gradient elasticity within the symmetric BEM formulation
Stefano de Miranda, Antonio Palermo, Francesco Ubertini
A simple beam model to assess the strength of adhesively bonded tile floorings
Daniela Addessi, Paolo Di Re
A 3D mixed frame element with multi‐axial coupling for thin‐walled structures with damage
A. Madeo, R. Casciaro, G. Zagari, R. Zinno, G. Zucco
Evaluation of performance of cold‐formed steel structures using Koiter asymptotic approach
Leopoldo Greco, Massimo Cuomo
Consistent tangent operator for an exact Kirchhoff rod model
pausa pranzo
14:45 16:15 Sessione GIMC3: Chairman Luciano Rosati
13:00 14:45
Alessandro Reali, Ferdinando Auricchio, Lourenco Beirão da Veiga, Hector Gomez, Thomas JR Hughes, Giancarlo Sangalli
A basic introduction to isogeometric collocation methods with some applications
Laura De Lorenzis, Roland Kruse, Nhon Nguyen‐Thanh
Isogeometric collocation for large‐deformation frictional contact
Andrea Chiozzi, Marcello Malagù, Antonio Tralli, Antonio Cazzani
Analysis of masonry arches: a NURBS based simple applicative program
Leopoldo Greco, Massimo Cuomo
Isogeometric interpolation of strong discontinuity fields
Andrea Panteghini, Rocco Lagioia
A numerically efficient implicit integration algorithm for the Matsuoka‐Nakai failure criterion
Carlo Burrafato, Francesco Ubertini, Stefano de Miranda e Alessandro de Rosis
Rigid wedge‐shaped hull impacting a free surface: a lattice Boltzmann‐immersed boundary study
16:30 18:30
Visita Abbazia
18:30 19:30
20:00
Assemblea GIMC
cena libera
12‐giu 09:00 09:45 Invited Lecture GIMC: Chairman Giorgio Zavarise
Paolo Luchini
Luchini‐Giannetti: Error Sensitivity to Refinement: a criterion for optimal grid adaptation
09:45 10:45
Sessione GIMC4: Chairman Stefano Lenci
Alessio Gizzi, Marcello Vasta, Anna Pandolfi
Computational Modeling of Fiber Recruitment for Statistical Distributed Biological Tissues
Simone Morganti, Michele Conti, Marco Aiello, Alessandro Reali, Ferdinando Auricchio
Advanced numerical simulations in biomechanics: patient‐specific finite element analysis of transcatheter aortic valve implantation
Claudio Maruccio, Laura De Lorenzis
A multilevel finite element approach for piezoelectric textiles made of polymeric nanofibers
Francesco Parrinello, Guido Borino
Computational issues on multiscale FE analysis
10:45 11:15
11:15 13:00
Coffee break
Sessione GIMC5: Chairman Laura De Lorenzis
Pierpaolo Belardinelli, Stefano Lenci
Parallel programming techniques for the computation of basins of attraction
Nicola A. Nodargi, Edoardo Artioli, Federica Caselli and Paolo Bisegna
On the state update for isotropic elasto‐plastic hardening materials: a dissipation‐based algorithm
Federica Confalonieri, Umberto Perego, Aldo Ghisi
Selective mass scaling for thin structures discretized with multi‐layered, solid‐shell elements
Antonio Cazzani, Flavio Stochino, Emilio Turco How to refine the Sardinia Radio Telescope finite element model
Massimiliano Cremonesi, Francesco Ferri, Umberto Perego
A Lagrangian finite element approach for the numerical simulation of landslide runouts
Paolo Bisegna, Federica Caselli, Edoardo Artioli, Nicola A. Nodargi A corotational tetrahedral element with rotational degrees of freedom for large‐displacement analysis of inelastic structures
Valerio Carollo, Giuseppe Giambanco, Antonino Spada
Non linear analysis of 3D elastoplastic framed structures
13:00 15:00
15:00 15:45
pausa pranzo
Invited Lecture GMA: Chairman Roberta Massabò
Giuseppe Mensitieri
Mensitieri‐Scherillo‐Musto: Sorption of low molecular weight compounds in polymers: thermodynamic issues and plasticization effects 15:45 17:15
Sessione GIMC6: Chairman Umberto Perego
Andrea Genoese, Alessandra Genoese, Antonio Bilotta, Giovanni Garcea
Buckling analysis using a generalized beam model including section distortions
Dario De Domenico, Aurora A. Pisano, Paolo Fuschi
Limit analysis of FRP‐strengthened RC members
Giuseppe Sciumè, Farid Benboudjem, Giorgio Zavarise
Concrete Mechanics at Early Age
Nicola Cefis, Claudia Comi
Damage modelling in concrete subject to sulfate attack
Luca Facchini, Michele Betti
An efficient Bouc & Wen approach for seismic analysis of masonry tower
Loredana Contrafatto, Renato Cosenza
Pull‐out strength of chemical anchors in natural stone
Coffee break
17:30 19:00 Sessione GIMC7: Chairman Alessandro Reali
17:15 17:30
L. Zito, S. Terravecchia, T. Panzeca
Multidomain Symmetric Galerkin BEM for non‐linear analysis of masonries in‐plane loaded
Valentina Zega, Claudia Comi, Alberto Corigliano, Carlo Valzasina
Integrated structure for a resonant micro‐gyroscope and accelerometer
Valeria Settimi, Giuseppe Rega
Numerical Analyses in the Nonlinear Dynamics and Control of Microcantilevers in Atomic Force Microscopy
S. de Miranda, L. Patruno, F. Ubertini, G. Vairo
A generalized time‐domain approach for motion‐related wind loads on long‐span bridges
S. de Miranda, L. Patruno , M. Ricci , R. Saponelli, F. Ubertini
Ceramic sanitary wares: reverse engineering strategy for mould prototyping
Leonardo Leonetti, Antonio Bilotta, Giovanni Garcea, Raffaele Casciaro
Shakedown analysis of 3D frames with an effective evaluation of the elastic domain and of the load combinations
19:00 20:00
20:00
13‐giu 09:00 09:45
Assemblea GMA
Cena sociale
Sessione Speciale addottorati candidati premio ECCOMAS: Chairman Guido Borino
Rossana Dimitri
Isogeometric treatment of large deformation contact and debonding problems with NURBS and T‐Splines
Michele Marino
Pseudopotentials and thermomechanical response of materials and structures: a convex analysis approach
Giuseppe Sciumé
Multiphase modeling of porous media: from concrete to tumor growth
09:45 10:45
Sessione GIMC8: Chairman Paolo Bisegna
Edoardo Artioli, Paolo Bisegna
Dissipation‐based integration algorithm for SMA constitutive models
Vittorio Di Cocco, Francesco Iacoviello, Alessandra Rossi
A simple FEM model to predict the mechanical behaviour of an equiatomic NiTi SMA alloy
Ferdinando Auricchio, Elena Bonetti, Giulia Scalet, Francesco Ubertini
A new flexible approach for shape memory alloy constitutive modeling
Valentina Sepe, Ferdinando Auricchio, Sonia Marfia, Elio Sacco
Porous Shape Memory Alloys: a Micromechanical Analysis
10:45 11:00
Sessione Speciale Applicativi
Francesco Russo (ALTAIR)
Advanced numerical models for massive industrial applications
Coffee break
11:30 13:15 Sessione GIMC9: Chairman Francesco Ubertini
11:00 11:30
Rossana Dimitri, Marco Trullo, Laura De Lorenzis, Giorgio Zavarise
A consistency study of cohesive zone models for mixed‐mode debonding problems
Giulio Alfano, Marco Musto
Formulation of Rate‐Dependent Cohesive‐Zone Models
Carlo Callari, Valentina Fasano
Interface poroelastic laws to model fluid‐induced damage in oil wells
Gabriele Milani, Alberto Taliercio
A method of cells‐type kinematic limit analysis approach for the evaluation of the macroscopic strength domain of in‐plane loaded periodic masonry
Giuseppe Giambanco, Emma La Malfa Ribolla, Antonino Spada
FE‐Meshless multiscale non‐linear analysis of masonry structures
Domenico Bruno, Fabrizio Greco, Lorenzo Leonetti, Stefania Lo Feudo, Paolo Lonetti
An adaptive multiscale approach for the failure analysis of fiber‐reinforced composite materials
Michele Marino, Francesca Nerilli, Giuseppe Vairo
A finite‐element approach for the analysis of pin‐bearing failure of composite laminates
13:15 14:45
pranzo
Programma dei lavori GMA
10‐giu 17:00 19:00 Registrazione
11‐giu 08:00 09:00 Registrazione
09:00 10:00 Apertura Convegno
Saluti del Prof. Ciro Attaianese, Rettore dell'Università di Cassino e del Lazio Meridionale
Saluti del Prof. Marco Dell'Isola, Direttore del Dipartimento di Ingegneria Civile e Meccanica
10:00 11:00
Sessioni
GIMC
11:00 11:30
11:30 13:00
Coffee break
Sessioni GIMC
13:00 14:45
14:45 16:15
pausa pranzo
Sessioni GIMC
16:30 18:30
18:30 19:30
20:00
Visita Abbazia
Assemblea GIMC
cena libera
12‐giu 09:00 09:45 Invited Lecture GIMC: Chairman Giorgio Zavarise
Paolo Luchini
Luchini‐Giannetti: Error Sensitivity to Refinement: a criterion for optimal grid adaptation
09:45 10:45
Sessione GMA1: Chairman Luigi Gambarotta
Francesco Dal Corso, Davide Bigoni, Federico Bosi, Diego Misseroni
Elastically deformable scale through configurational forces
Giorgio Carta, Michele Brun, Alexander B. Movchan
Propagation of elastic waves and generation of band‐gaps in diffusively damaged structures
D. Colquitt, M. Brun, M. Gei, A.B. Movchan, N.V. Mochan, I.S. Jones
Cloaking in flexural waves
Alessandro Tiero, Giuseppe Tomassetti
Morphoelastic rods
10:45 11:15
11:15 13:00
Coffee break
Sessione GMA2: Chairman Lorenza Petrini
Andrea Bacigalupo, Luigi Gambarotta
Micropolar and Seond‐Gradient Homogenization of Chiral Cellular Solids
Luigi Cabras, Michele Brun
A new Auxetic Lattice Model
Patrizia Trovalusci
Discrete‐to‐continuum approaches for complex materials as ‘Non–Simple’ continua
Lorenzo Bardella, Andrea Panteghini
On the compressive strength of glass‐microballoons/thermoset‐matrix syntactic foams
G. Parisi, S. Bignozzi, E. Kon, P. Vena
Multiscale analyses of a three layers osteochondral scaffold
Maria Laura De Bellis, Daniela Addessi, Elio Sacco
A micromechanical approach for the micropolar modeling of heterogeneous periodic media
Anna Castellano, Pilade Foti, Aguinaldo Fraddosio, Salvatore Marzano, Mario Daniele Piccioni
Geometric Numerical Integrators Based on the Magnus Expansion in Bifurcation Problems for Non‐Linear Elastic Solids
13:00 15:00
15:00 15:45
pausa pranzo
Invited Lecture GMA: Chairman Roberta Massabò
Giuseppe Mensitieri
Mensitieri‐Scherillo‐Musto: Sorption of low molecular weight compounds in polymers: thermodynamic issues and plasticization effects 15:45 17:15
Sessione GMA3: Chairman Lorenzo Bardella
Roberto Alessi, Achille Paolone, Stefano Vidoli
Variational approach to damage mechanics with plasticity and nucleation of cohesive cracks
Roberta Massabò, Francesca Campi
Effective modeling of multilayered composites with cohesive and imperfect interfaces
Guido Borino, Francesco Parrinello
Interface Constitutive Relation derived from a Representative Adhesive Layer
Roberto Serpieri, Elio Sacco, Giulio Alfano
A cohesive‐zone model simulating damage, friction and interlocking
Roberto Ballarini, Annalisa Franco, Gianni Royer Carfagni
A model to interpret the wedge‐shaped spalling in pull‐out tests of FRP from concrete
Paolo Casini, Oliviero Giannini, Fabrizio Vestroni
Crack detection in beam‐like structures by nonlinear harmonic identification
17:15 17:30
17:30 19:00
Coffee break
Sessione GMA4: Chairman Pasquale Vena
Lorenza Petrini, Wei Wu, Lina Altomare, Barbara Previtali, Maurizio Vedani, Francesco Migliavacca
Development of biodegradable magnesium alloy stents with coating: the peeling problem
Thanasis Zisis, Francesco Dal Corso
A contact problem in couple‐stress thermoelasticity
Luciano Feo, Ayman S. Mosallam, Rosa Penna
An experimental investigation on the axial and rotational behavior of web‐flange junctions of open‐web pultruded glass fibre‐reinforced profiles
Francesco Ascione, Geminiano Mancusi, Marco Lamberti
Pre‐buckling behavior of composite beams: an innovative approach
Silvia Di Caprera, Michele Marino, Giuseppe Vairo
Bending of shape‐memory alloys' beams: constitutive modeling and structural response
A. Fortini, M. Merlin, R. Rizzoni, S. Marfia
TWSME of NiTi strips in free bending conditions: experimental and theoretical approach
19:00 20:00
20:00
Assemblea GMA
Cena sociale
13‐giu 09:00 09:45 Sessione Speciale addottorati candidati premio ECCOMAS
Rossana Dimitri
Isogeometric treatment of large deformation contact and debonding problems with NURBS and T‐Splines
Michele Marino
Pseudopotentials and thermomechanical response of materials and structures: a convex analysis approach
Giuseppe Sciumé
Multiphase modeling of porous media: from concrete to tumor growth
09:45 11:00
Sessione GMA5: Chairman Giulio Alfano
Paola Nardinocchi, Matteo Pezzulla, Luciano Teresi
Anisotropic Swelling in fibrous materials Andrea Infuso, Marco Paggi
Flaw‐tolerance of nonlocal discrete systems and interpretation according to network theory
Raffaele Ardito, Rocco Musci
Flutter analysis of piezoelectric laminate beams in MEMS
Luigi Ascione, Anna D’Aponte, Geminiano Mancusi
Constitutive behavior of FRCM materials for structural plating: an experimental study
Andrea Caporale, Raimondo Luciano
A micromechanical four‐phase model to predict the compressive failure surface of cement concrete
Coffee break
11:30 12:30 Sessione GMA6: Chairman Raimondo Luciano
11:00 11:30
Ernesto Grande, Maura Imbimbo
A data fusion based approach for damage detection in linear systems
Jessica Toti, Vincenzo Gattulli, Elio Sacco
Damage propagation modeling of masonry structures subjected to dynamic loading
Sara Malagisi, Sonia Marfia, Elio Sacco
Superelastic and Shape Memory effects in shape memory alloy beams
Anna Castellano, Pilade Foti, Aguinaldo Fraddosio, Salvatore Marzano, Mario Daniele Piccioni
Experimental and Numerical Approaches for the Ultrasonic Characterization of Composite Materials
13:15 14:45
pranzo
Convegno GIMC-GMA 2014:
-
XX Convegno Nazionale di Meccanica Computazionale
-
VII Riunione del Gruppo Materiali AIMETA
Cassino 11 – 13 giugno 2014
Università degli Studi di Cassino e del Lazio Meridionale
Dipartimento di Ingegneria Civile e Meccanica