IPC-BX955 CentOS6.0 インストール確認書

IPC-BX955 CentOS6.0 インストール確認書
CentOS 6.0-i386-bin-DVD.iso
目次
1
2
調査環境 .................................................................................................................................................. - 3 1.1
ハードウェア .................................................................................................................................... - 3 -
1.2
ソフトウェア .................................................................................................................................... - 3 -
調査項目の手順と結果............................................................................................................................. - 4 2.1
Console 日本語入力 ......................................................................................................................... - 5 -
2.2
シリアルポート................................................................................................................................. - 6 -
2.2.1 ポーリング処理の接続方法......................................................................................................... - 6 -
3
2.3
LINE 出力......................................................................................................................................... - 7 -
2.4
LINE 入力......................................................................................................................................... - 8 -
2.5
CF ..................................................................................................................................................... - 9 -
2.6
PowerManagement........................................................................................................................ - 11 -
2.6.1
S1, S3, S4 ステート.................................................................................................................. - 11 -
2.6.2
S5 ステート .............................................................................................................................. - 11 -
付録 ....................................................................................................................................................... - 12 3.1
メモリの確認 .................................................................................................................................. - 12 -
3.2
runlevel 対応サービス.................................................................................................................... - 12 -
3.3
CPU 情報 ........................................................................................................................................ - 14 -
3.4
メモリ情報 ...................................................................................................................................... - 14 -
3.5
カーネルモジュールメッセージ .................................................................................................... - 16 -
3.6
PCI Device 情報 ............................................................................................................................. - 26 -
3.7
システムロードモジュール ............................................................................................................. - 27 -
3.8
バージョン情報............................................................................................................................... - 29 -
3.9
IRQ 利用情報.................................................................................................................................. - 29 -
3.10
I/O ポート利用情報....................................................................................................................... - 30 -
-2-
1 調査環境
調査環境
1
1.1
ハードウェア
IPC-BX955
ハードウェアの詳細なスペックについては、ユーザーズマニュアルを参照してください。
LAN 1
COM 2
COM 1
イヤフォン
クロスケーブル
LAN 1
クロスケーブル
汎用 PC(Windows XP)
IPC-BX955(Linux)
図 1 ハードウェアの接続形態
※マウス、モニタ等は省略しています。
※マイクが無い場合(マイク感度が悪く音が拾えない場合)は、マイク代替として PC の Line-OUT から Line-IN
へ直接接続でも可能です。
1.2
ソフトウェア
本調査で使用したディストリビューションについては以下の通りです。
・CentOS6.0
バージョン情報
[root@localhost ~]# cat /proc/version
Linux version 2.6.32-71.el6.i686 ([email protected]) (gcc version 4.4.4 20100726 (Red
Hat 4.4.4-13) (GCC) ) #1 SMP Fri Nov 12 04:17:17 GMT 2010
[root@localhost ~]#
-3-
2 調査項目の手順と結果
2
調査項目の手順と結果
本書では以下の内容を調査致しました。また、インストール後に行った調査に関しましては、root 権限にて実
行しています。
表 1 調査結果
調査項目
結果
USB 接続メディアよりインストール出来る事
OS
free の内容確認
キーボード
マウス
備考
○
正常に通常インストールが可能
メモリ
USB
確認内容
キーボード、マウスが正常に動作する事
インストール DVD からインストール作業が正常
○
付録参照
○
インストール時及び OS 入力後共正常
○
インストール時及び OS 入力後共正常
インストール時正常認識
に行える事
○
日本語入力
日本語入力を行い表示できる事
○
DVI
ディスプレイを接続し正しく表示される事
○
シリアルポート
シリアルポートより通信が出来ること
○
ライン出力
イヤフォンを接続し音の出力が確認出来る事
○
イヤフォンにて音声確認
マイク入力
外部から音声入力し録音出来る事
○
ライン出力から入力し録音
LAN
DHCP でネットワーク情報が取得出来る事
○
CD/DVD
CF
FAT32 でフォーマットした CF を CF2 に挿入し、
OS インストール後 auto mount 確認
DHCP サーバより IP address 取得確認。
Yum にてパッケージインストールが可能
○
読み書きすることができるか。
スタンバイ(S1 ステート)動作
○
正常動作
Power
サスペンド(S3 ステート)動作
IPC-BX955 の BIOS がサポートしていないため。
Management
ハイバネーション(S4 ステート)動作
IPC-BX955 の BIOS がサポートしていないため。
システム終了時の電源 OFF（S5 ステート）動作
○
-4-
正常動作
2 調査項目の手順と結果
2.1
Console 日本語入力
GNOME 画面上で「Ctrl」 + 「space」または「半角/全角キー」を押下します。
画面右下に日本語のコントロールが表示され、日本語が入力できることを確認します。
-5-
2 調査項目の手順と結果
2.2
シリアルポート
文字列の送受信テスト
IPC-BX955 の COM1 と COM2 にクロスケーブルを用いて接続します。
ターミナルウインドウを２つ起動してください。片側のターミナルウインドウで、以下のコマンドを入力して
ください。このコマンドを入力した方が受信側となります。
[root@localhost
[root@localhost
]# cat /dev/ttyS0
]#
もう片方が送信側です。以下のコマンドを入力して文字列（aiueo）を送信してください。
[root@localhost ]# echo aiueo > /dev/ttyS1
[root@localhost ]#
受信側のターミナルウインドウに送信側のターミナルウインドウから送信したテキストが表示されれば、正常
に通信が出来ています。以下の画面が表示されます。
2.2.1 ポーリング処理の接続方法
IPC-BX955、ttyS0 の IRQ を 0 に設定し、更新されているか確認を行います。
[root@localhost ]# setserial /dev/ttyS0 irq 0
[root@localhost ]# setserial -Gg /dev/ttyS0
/dev/ttyS0 uart 16550A port 0x03f8 irq 0 baud_base 115200 spd_normal
[root@localhost ]#
2.2 シリアルポートを元に文字列の送受信を行います。
-6-
skip_test
2 調査項目の手順と結果
2.3
LINE 出力
デスクトップのタスクバーより、「システム」→「設定」→「サウンド」を選択すると、
以下の画面が表示されます。テストボタンを押してイヤフォンに音が出力されるのを確認します。
-7-
2 調査項目の手順と結果
2.4
LINE 入力
録音と再生
録音を行う場合、まず ALSA ユーティリティのミキサーコマンドよりマイクの設定が Caprure [on]の状態か
確認し,off であれば capture [on]に設定してください。
[root@localhost ]# amixer –c 0
＜省略＞
＜省略＞
[root@localhost
]# amixer –c 0 set Mic 100% unmute cap （Capture が off の場合、実行する）
[root@localhost
]#
IPC-BX955 機にて録音を行います。
[root@localhost ]# arecord -t wav -d 15 -f dat test1.wav
録音中 WAVE ‘test1.wav’ : Signed 16bit Little Endian, レート
[root@localhost ]#
録音したファイルの再生を行います。
[root@localhost ]# aplay test1.wav
再生中 WAVE ‘test1.wav’ : Signed 16bit Little Endian, レート
[root@localhost ]#
-8-
48000 Hz, ステレオ
48000 Hz, ステレオ
2 調査項目の手順と結果
2.5
CF
「システム」→「管理」→「ハードウェア」を選択し、デバイスマネージャを表示します。Devices に CF が
表示されている事を確認します。
フォルダを作成し、マウントを行います。
[root@localhost ]# mkdir /mnt/DATA
[root@localhost ]# mount -t vfat /dev/sdb1
マウントの確認を行います。
[root@localhost ]# mount
＜省略＞
/dev/sdb1 on /mnt/DATA type
[root@localhost ]#
vfat
/mnt/DATA
(rw)
テキストファイルの読み書きを行います。
[root@localhost ]# echo hello > /mnt/DATA/hello.txt
[root@localhost ]# cat /mnt/DATA/hello.txt
hello
[root@localhost ]#
-9-
2 調査項目の手順と結果
アンマウントを行い、ファイルが読めなくなる事を確認します。
[root@localhost ]# umount /mnt/DATA/
[root@localhost ]# ls /mnt/DATA
[root@localhost ]#
- 10 -
2 調査項目の手順と結果
2.6
PowerManagement
2.6.1 S1, S3, S4 ステート
パワーマネジメントステータスを確認し、サスペンド処理が使用可の状態か確認を行います。
[root@localhost ]# cat /sys/power/state
standby disk
[root@localhost ]#
このシステムは、スタンバイ(standby)とハイバネーション(disk)をサポートしていると表示されますが
IPC-BX955 の BIOS はハイバネーションをサポートしていないため、ご利用になれません。
表 2
/sys/power/state
出力文字
ACPI 状態
意味
関連コマンド
standby
スタンバイ
S1
mem
サスペンド
S3
pm-suspend
disk
ハイバネーション
S4
pm-hibernate
スタンバイ機能(ACPI S1 ステート)は、以下で動作を確認することができます。
[root@localhost ]# echo -n standby > /sys/power/state
スタンバイ状態に遷移したら、電源スイッチを ON してください。
Linux の復帰を確認できます。
2.6.2 S5 ステート
シャットダウンコマンドを実行してください。
シャットダウン終了後、本体の電源が OFF になることを確認できます。
[root@localhost ]# shutdown -h now
- 11 -
3 付録
3
3.1
付録
メモリの確認
[root@localhost ~]#free
total
used
Mem:
1021964
936168
85796
-/+ buffers/cache:
234228
787736
Swap:
2064376
0
2064376
[root@localhost ~]#
3.2
free
0
shared
buffers
cached
71408
630532
runlevel 対応サービス
[root@localhost ~]# chkconfig –list
NetworkManager
0:off
abrtd
0:off
acpid
0:off
atd
0:off
auditd
0:off
autofs
0:off
avahi-daemon
0:off
bluetooth
0:off
certmonger
0:off
cgconfig
0:off
cgred
0:off
cpuspeed
0:off
crond
0:off
cups
0:off
dnsmasq
0:off
firstboot
0:off
haldaemon
0:off
httpd
0:off
ip6tables
0:off
iptables
0:off
irqbalance
0:off
kdump
0:off
lvm2-monitor
0:off
mdmonitor
0:off
messagebus
0:off
microcode_ctl
0:off
netconsole
0:off
netfs
0:off
network
0:off
nfs
0:off
nfslock
0:off
nscd
0:off
nslcd
0:off
ntpd
0:off
ntpdate
0:off
oddjobd
0:off
portreserve
0:off
postfix
0:off
psacct
0:off
rdisc
0:off
restorecond
0:off
rpcbind
0:off
rpcgssd
0:off
rpcidmapd
0:off
rpcsvcgssd
0:off
rsyslog
0:off
saslauthd
0:off
smartd
0:off
snmpd
0:off
snmptrapd
0:off
sshd
0:off
sssd
0:off
sysstat
0:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:on
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:on
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:off
1:on
2:on
2:off
2:on
2:off
2:on
2:off
2:off
2:off
2:off
2:off
2:off
2:on
2:on
2:on
2:off
2:off
2:off
2:off
2:on
2:on
2:off
2:off
2:on
2:on
2:on
2:on
2:off
2:off
2:on
2:off
2:off
2:off
2:off
2:off
2:off
2:off
2:on
2:on
2:off
2:off
2:off
2:on
2:off
2:off
2:off
2:on
2:off
2:off
2:off
2:off
2:on
2:off
2:on
3:on
3:on
3:on
3:on
3:on
3:on
3:on
3:on
3:off
3:off
3:off
3:on
3:on
3:on
3:off
3:off
3:on
3:off
3:on
3:on
3:on
3:off
3:on
3:on
3:on
3:on
3:off
3:on
3:on
3:off
3:on
3:off
3:off
3:off
3:off
3:off
3:on
3:on
3:off
3:off
3:off
3:on
3:on
3:on
3:off
3:on
3:off
3:off
3:off
3:off
3:on
3:off
3:on
4:on
4:off
4:on
4:on
4:on
4:on
4:on
4:on
4:off
4:off
4:off
4:on
4:on
4:on
4:off
4:off
4:on
4:off
4:on
4:on
4:on
4:off
4:on
4:on
4:on
4:on
4:off
4:on
4:on
4:off
4:on
4:off
4:off
4:off
4:off
4:off
4:on
4:on
4:off
4:off
4:off
4:on
4:on
4:on
4:off
4:on
4:off
4:off
4:off
4:off
4:on
4:off
4:on
- 12 -
5:on
5:on
5:on
5:on
5:on
5:on
5:on
5:on
5:off
5:off
5:off
5:on
5:on
5:on
5:off
5:off
5:on
5:off
5:on
5:on
5:on
5:off
5:on
5:on
5:on
5:on
5:off
5:on
5:on
5:off
5:on
5:off
5:off
5:off
5:off
5:off
5:on
5:on
5:off
5:off
5:off
5:on
5:on
5:on
5:off
5:on
5:off
5:off
5:off
5:off
5:on
5:off
5:on
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
6:off
3 付録
udev-post
wpa_supplicant
ypbind
[root@localhost ~]#
0:off
0:off
0:off
1:on
1:off
1:off
2:on
2:off
2:off
3:on
3:off
3:off
4:on
4:off
4:off
- 13 -
5:on
5:off
5:off
6:off
6:off
6:off
3 付録
3.3
CPU 情報
[root@localhost ~]# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model
: 28
model name
: Intel(R) Atom(TM) CPU N270
@ 1.60GHz
stepping : 2
cpu MHz
: 800.000
cache size : 512 KB
physical id : 0
siblings
:2
core id
:0
cpu cores : 1
apicid
:0
initial apicid
:0
fdiv_bug : no
hlt_bug
: no
f00f_bug : no
coma_bug : no
fpu
: yes
fpu_exception
: yes
cpuid level : 10
wp
: yes
flags
: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
nx constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 xtpr pdcm movbe lahf_lm
bogomips : 3192.09
clflush size : 64
cache_alignment
: 64
address sizes
: 32 bits physical, 32 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model
: 28
model name
: Intel(R) Atom(TM) CPU N270
@ 1.60GHz
stepping : 2
cpu MHz
: 800.000
cache size : 512 KB
physical id : 0
siblings
:2
core id
:0
cpu cores : 1
apicid
:1
initial apicid
:1
fdiv_bug : no
hlt_bug
: no
f00f_bug : no
coma_bug : no
fpu
: yes
fpu_exception
: yes
cpuid level : 10
wp
: yes
flags
: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
nx constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 xtpr pdcm movbe lahf_lm
bogomips : 3191.47
clflush size : 64
cache_alignment
: 64
address sizes
: 32 bits physical, 32 bits virtual
power management:
[root@localhost ~]#
3.4
メモリ情報
- 14 -
3 付録
[root@localhost ~]# cat /proc/meminfo
MemTotal:
1021964 kB
MemFree:
84920 kB
Buffers:
71472 kB
Cached:
630712 kB
SwapCached:
0 kB
Active:
240292 kB
Inactive:
571420 kB
Active(anon):
109780 kB
Inactive(anon):
18124 kB
Active(file):
130512 kB
Inactive(file):
553296 kB
Unevictable:
0 kB
Mlocked:
0 kB
HighTotal:
131976 kB
HighFree:
252 kB
LowTotal:
889988 kB
LowFree:
84668 kB
SwapTotal:
2064376 kB
SwapFree:
2064376 kB
Dirty:
20 kB
Writeback:
0 kB
AnonPages:
109472 kB
Mapped:
62452 kB
Shmem:
18376 kB
Slab:
105016 kB
SReclaimable:
60980 kB
SUnreclaim:
44036 kB
KernelStack:
1936 kB
PageTables:
6488 kB
NFS_Unstable:
0 kB
Bounce:
0 kB
WritebackTmp:
0 kB
CommitLimit:
2575356 kB
Committed_AS:
539488 kB
VmallocTotal:
122880 kB
VmallocUsed:
14356 kB
VmallocChunk:
94560 kB
HugePages_Total:
0
HugePages_Free:
0
HugePages_Rsvd:
0
HugePages_Surp:
0
Hugepagesize:
2048 kB
DirectMap4k:
12280 kB
DirectMap2M:
894976 kB
[root@localhost ~]#
- 15 -
3 付録
3.5
カーネルモジュールメッセージ
[root@localhost ~]# dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-71.el6.i686 ([email protected]) (gcc version 4.4.4 20100726 (Red Hat 4.4.4-13) (GCC) ) #1 SMP Fri Nov 12 04:17:17
GMT 2010
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f6e0000 (usable)
BIOS-e820: 000000003f6e0000 - 000000003f6e3000 (ACPI NVS)
BIOS-e820: 000000003f6e3000 - 000000003f6f0000 (ACPI data)
BIOS-e820: 000000003f6f0000 - 000000003f700000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
DMI 2.2 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x3f6e0 max_arch_pfn = 0x400000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CDFFF write-protect
CE000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask 0C0000000 write-back
1 base 03F800000 mask 0FF800000 uncachable
2 base 03F700000 mask 0FFF00000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 1016MB, range: 8MB, type UC
reg 2, base: 1015MB, range: 1MB, type UC
total RAM covered: 1015M
Found optimal setting for mtrr clean up
gran_size: 64K
chunk_size: 16M
num_reg: 3
lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 1015MB, range: 1MB, type UC
reg 2, base: 1016MB, range: 8MB, type UC
initial memory mapped : 0 - 01000000
init_memory_mapping: 0000000000000000-00000000375fe000
NX (Execute Disable) protection: active
0000000000 - 0000200000 page 4k
0000200000 - 0037400000 page 2M
0037400000 - 00375fe000 page 4k
kernel direct mapping tables up to 375fe000 @ 10000-18000
RAMDISK: 373b9000 - 37fefabc
Allocated new RAMDISK: 00bdb000 - 01811abc
Move RAMDISK from 00000000373b9000 - 0000000037fefabb to 00bdb000 - 01811abb
- 16 -
3 付録
ACPI: RSDP 000f9440 00014 (v00 IntelR)
ACPI: RSDT 3f6e3000 00038 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 3f6e3080 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 3f6e3100 05AF4 (v01 INTELR AWRDACPI 00001000 MSFT 03000000)
ACPI: FACS 3f6e0000 00040
ACPI: _HPT 3f6e8c80 00038 (v01 IntelR AWRDACPI 42302E31 AWRD 00000098)
ACPI: MCFG 3f6e8cc0 0003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: APIC 3f6e8c00 00068 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: SSDT 3f6e9360 00482 (v01 PmRef
CpuPm 00003000 INTL 20081031)
ACPI: Local APIC address 0xfee00000
128MB HIGHMEM available.
885MB LOWMEM available.
mapped low ram: 0 - 375fe000
low ram: 0 - 375fe000
node 0 low ram: 00000000 - 375fe000
node 0 bootmap 00014000 - 0001aec0
(9 early reservations) ==> bootmem [0000000000 - 00375fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000]
EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000]
TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000400000 - 0000bd18a4]
TEXT DATA BSS ==> [0000400000 - 0000bd18a4]
#4 [000009f000 - 0000100000]
BIOS reserved ==> [000009f000 - 0000100000]
#5 [0000bd2000 - 0000bda0be]
BRK ==> [0000bd2000 - 0000bda0be]
#6 [0000010000 - 0000014000]
PGTABLE ==> [0000010000 - 0000014000]
#7 [0000bdb000 - 0001811abc]
NEW RAMDISK ==> [0000bdb000 - 0001811abc]
#8 [0000014000 - 000001b000]
BOOTMAP ==> [0000014000 - 000001b000]
found SMP MP-table at [c00f5150] f5150
Zone PFN ranges:
DMA
0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000375fe
HighMem 0x000375fe -> 0x0003f6e0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0003f6e0
On node 0 totalpages: 259695
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1740 pages used for memmap
Normal zone: 220978 pages, LIFO batch:31
HighMem zone: 258 pages used for memmap
HighMem zone: 32736 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 3f700000 (gap: 3f700000:a0900000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 15 pages/cpu @c2200000 s38360 r0 d23080 u1048576
pcpu-alloc: s38360 r0 d23080 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257665
Kernel command line: ro root=/dev/mapper/VolGroup-lv_root rd_LVM_LV=VolGroup/lv_root rd_LVM_LV=VolGroup/lv_swap rd_NO_LUKS rd_NO_MD
rd_NO_DM LANG=ja_JP.UTF-8 KEYBOARDTYPE=pc KEYTABLE=hu101 rhgb quiet
- 17 -
3 付録
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000375fe:0003f6e0)
Memory: 1008524k/1039232k available (4168k kernel code, 29848k reserved, 2220k data, 524k init, 131976k highmem)
virtual kernel memory layout:
fixmap : 0xffad5000 - 0xfffff000 (5288 kB)
pkmap : 0xff600000 - 0xff800000
(2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000
( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xc0a3e000 - 0xc0ac1000
( 524 kB)
.data : 0xc0812006 - 0xc0a3d008
(2220 kB)
.text : 0xc0400000 - 0xc0812006
(4168 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
NR_IRQS:2304 nr_irqs:424
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 5242880 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Fast TSC calibration using PIT
Detected 1596.047 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.09 BogoMIPS (lpj=1596047)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
... version:
3
... bit width:
40
... generic registers:
2
... value mask:
000000ffffffffff
... max period:
000000007fffffff
... fixed-purpose events: 3
... event mask:
0000000700000003
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090903
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Atom(TM) CPU N270
@ 1.60GHz stepping 02
Booting Node
0, Processors #1 Ok.
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (6383.57 BogoMIPS).
sizeof(vma)=100 bytes
sizeof(page)=32 bytes
sizeof(inode)=352 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=508 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=184 bytes
sizeof(task_struct)=1324 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
- 18 -
3 付録
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xfde80000-0xfdefffff]
pci 0000:00:02.0: reg 14 io port: [0xff00-0xff07]
pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 1c 32bit mmio: [0xfdf80000-0xfdfbffff]
pci 0000:00:02.1: reg 10 32bit mmio: [0xfdf00000-0xfdf7ffff]
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xfe00-0xfe1f]
pci 0000:00:1d.1: reg 20 io port: [0xfd00-0xfd1f]
pci 0000:00:1d.2: reg 20 io port: [0xfc00-0xfc1f]
pci 0000:00:1d.3: reg 20 io port: [0xfb00-0xfb1f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.2: reg 10 io port: [0xf200-0xf2ff]
pci 0000:00:1e.2: reg 14 io port: [0xfa00-0xfa3f]
pci 0000:00:1e.2: reg 18 32bit mmio: [0xfdffe000-0xfdffe1ff]
pci 0000:00:1e.2: reg 1c 32bit mmio: [0xfdffd000-0xfdffd0ff]
pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.2: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4000 (mask 007f)
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0xf800-0xf80f]
pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xfdae0000-0xfdafffff]
pci 0000:01:00.0: reg 18 io port: [0xef00-0xef1f]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: bridge io port: [0xe000-0xefff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xfda00000-0xfdafffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfd700000-0xfd7fffff]
pci 0000:02:00.0: reg 10 32bit mmio: [0xfd6e0000-0xfd6fffff]
pci 0000:02:00.0: reg 18 io port: [0xcf00-0xcf1f]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: bridge io port: [0xc000-0xcfff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xfd600000-0xfd6fffff]
pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff]
pci 0000:00:1c.2: bridge io port: [0xb000-0xbfff]
pci 0000:00:1c.2: bridge 32bit mmio: [0xfdc00000-0xfdcfffff]
pci 0000:00:1c.2: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff]
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xfd900000-0xfd9fffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfd800000-0xfd8fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [¥_SB_.PCI0._PRT]
- 19 -
3 付録
ACPI: PCI Interrupt Routing Table [¥_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [¥_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [¥_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [¥_SB_.PCI0.HUB0._PRT]
Unable to assume PCIe control: Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:06: IRQ 4 override to edge, high
pnp 00:07: IRQ 3 override to edge, high
pnp 00:09: IRQ 6 override to edge, high
pnp 00:0a: IRQ 7 override to edge, high
pnp 00:0b: IRQ 10 override to edge, high
pnp 00:0c: IRQ 11 override to edge, high
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x680-0x6ff has been reserved
system 00:01: ioport range 0x880-0x88f has been reserved
system 00:0d: ioport range 0x400-0x4bf could not be reserved
system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
system 00:10: iomem range 0xf0000-0xfffff could not be reserved
system 00:10: iomem range 0xfed00000-0xfed000ff has been reserved
system 00:10: iomem range 0x3f6e0000-0x3f6fffff could not be reserved
system 00:10: iomem range 0x0-0x9ffff could not be reserved
system 00:10: iomem range 0x100000-0x3f6dffff could not be reserved
system 00:10: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:10: iomem range 0xfed13000-0xfed1dfff has been reserved
system 00:10: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:10: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:10: iomem range 0xffb00000-0xffb7ffff has been reserved
system 00:10: iomem range 0xfff00000-0xffffffff has been reserved
system 00:10: iomem range 0xe0000-0xeffff has been reserved
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.0:
bridge window [0xe000-0xefff]
pci 0000:00:1c.0:
bridge window [0xfda00000-0xfdafffff]
pci 0000:00:1c.0:
bridge window [0xfd700000-0xfd7fffff]
pci 0000:00:1c.1: PCI bridge to [bus 02-02]
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.1:
bridge window [0xc000-0xcfff]
pci 0000:00:1c.1:
bridge window [0xfd600000-0xfd6fffff]
pci 0000:00:1c.1:
bridge window [0xfdd00000-0xfddfffff]
pci 0000:00:1c.2: PCI bridge to [bus 03-03]
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.2:
bridge window [0xb000-0xbfff]
- 20 -
3 付録
pci 0000:00:1c.2:
bridge window [0xfdc00000-0xfdcfffff]
pci 0000:00:1c.2:
bridge window [0xfdb00000-0xfdbfffff]
pci 0000:00:1e.0: PCI bridge to [bus 04-04]
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1e.0:
bridge window [0xd000-0xdfff]
pci 0000:00:1e.0:
bridge window [0xfd900000-0xfd9fffff]
pci 0000:00:1e.0:
bridge window [0xfd800000-0xfd8fffff]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
pci_bus 0000:01: resource 1 mem: [0xfda00000-0xfdafffff]
pci_bus 0000:01: resource 2 pref mem [0xfd700000-0xfd7fffff]
pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:02: resource 1 mem: [0xfd600000-0xfd6fffff]
pci_bus 0000:02: resource 2 pref mem [0xfdd00000-0xfddfffff]
pci_bus 0000:03: resource 0 io: [0xb000-0xbfff]
pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff]
pci_bus 0000:03: resource 2 pref mem [0xfdb00000-0xfdbfffff]
pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:04: resource 1 mem: [0xfd900000-0xfd9fffff]
pci_bus 0000:04: resource 2 pref mem [0xfd800000-0xfd8fffff]
pci_bus 0000:04: resource 3 io: [0x00-0xffff]
pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 12506k freed
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
type=2000 audit(1289908456.606:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1737
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 363E47C77F765FC
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program <[email protected]>
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
- 21 -
3 付録
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN] (on)
ACPI: SSDT 3f6e8d40 002AE (v01 PmRef Cpu0Ist 00003000 INTL 20081031)
processor LNXCPU:00: registered as cooling_device1
ACPI: SSDT 3f6e9200 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20081031)
processor LNXCPU:01: registered as cooling_device2
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (21 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945GME Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
crash memory driver: version 1.0
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS2 at I/O 0x2a8 (irq = 6) is a 16550A
00:0a: ttyS3 at I/O 0x2b0 (irq = 7) is a 16550A
serial 00:0b: disabled
serial 00:0c: disabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-71.el6.i686 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00
- 22 -
3 付録
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-71.el6.i686 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-71.el6.i686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-71.el6.i686 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-71.el6.i686 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:03: setting system clock to 2010-11-16 11:54:17 UTC (1289908457)
Initalizing network drop monitor service
Freeing unused kernel memory: 524k freed
Write protecting the kernel text: 4172k
Write protecting the kernel read-only data: 1788k
- 23 -
3 付録
dracut: dracut-004-32.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
udev: starting version 147
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: New USB device found, idVendor=413c, idProduct=2003
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Dell USB Keyboard
usb 3-1: Manufacturer: Dell
usb 3-1: configuration #1 chosen from 1 choice
input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input3
generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1/input0
[drm] Initialized drm 1.1.0 20060810
usb 3-2: new low speed USB device using uhci_hcd and address 3
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
[drm] set up 7M of stolen space
usb 3-2: New USB device found, idVendor=0461, idProduct=4d15
usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-2: Product: USB Optical Mouse
usb 3-2: configuration #1 chosen from 1 choice
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4
generic-usb 0003:0461:4D15.0002: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-2/input0
[drm] initialized overlay support
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 80x30
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf800 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf808 irq 15
ata2: port disabled. ignoring.
ata1.00: ATA-4: GBDriver RA6, ra6h.b00, max UDMA/33
ata1.00: 15728640 sectors, multi 0: LBA
ata1.01: CFA: AFAYA CFC 16GB, 20100323, max UDMA/66
ata1.01: 31293360 sectors, multi 0: LBA
ata1.00: configured for UDMA/33
ata1.01: configured for UDMA/66
scsi 0:0:0:0: Direct-Access
ATA
GBDriver RA6
ra6h PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access
ATA
AFAYA CFC 16GB
2010 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:1:0: [sdb] 31293360 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 < sdb5 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:1:0: [sdb] Attached SCSI disk
dracut: Scanning devices sda2 for LVM logical volumes VolGroup/lv_root VolGroup/lv_swap
dracut: inactive '/dev/VolGroup/lv_root' [5.04 GiB] inherit
dracut: inactive '/dev/VolGroup/lv_swap' [1.97 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/mapper/VolGroup-lv_root
dracut: Loading SELinux policy
type=1404 audit(1289908467.592:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 199690 rules.
SELinux: 2048 avtab hash slots, 199690 rules.
- 24 -
3 付録
SELinux: 9 users, 13 roles, 3323 types, 168 bools, 1 sens, 1024 cats
SELinux: 77 classes, 199690 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1289908469.733:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
readahead: starting
udev: starting version 147
e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2
e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
e1000e 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
e1000e 0000:01:00.0: setting latency timer to 64
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
e1000e 0000:01:00.0: irq 27 for MSI/MSI-X
e1000e 0000:01:00.0: Warning: detected ASPM enabled in EEPROM
0000:01:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:80:4c:a9:06:a4
0000:01:00.0: eth0: Intel(R) PRO/1000 Network Connection
0000:01:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff
e1000e 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
e1000e 0000:02:00.0: setting latency timer to 64
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
e1000e 0000:02:00.0: irq 28 for MSI/MSI-X
e1000e 0000:02:00.0: Warning: detected ASPM enabled in EEPROM
0000:02:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:80:4c:a9:06:a5
0000:02:00.0: eth1: Intel(R) PRO/1000 Network Connection
0000:02:00.0: eth1: MAC: 2, PHY: 2, PBA No: ffffff-0ff
Intel ICH 0000:00:1e.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Intel ICH 0000:00:1e.2: setting latency timer to 64
intel8x0_measure_ac97_clock: measured 50869 usecs (2452 samples)
intel8x0: clocking to 48000
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH7-M DH TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
EXT4-fs (sda1): mounted filesystem with ordered data mode
SELinux: initialized (dev sda1, type ext4), uses xattr
Adding 2064376k swap on /dev/mapper/VolGroup-lv_swap. Priority:-1 extents:1 across:2064376k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x212
platform microcode: firmware: requesting intel-ucode/06-1c-02
microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x212
platform microcode: firmware: requesting intel-ucode/06-1c-02
Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
- 25 -
3 付録
microcode: CPU0 updated to revision 0x218, date = 2009-04-10
microcode: CPU1 updated to revision 0x218, date = 2009-04-10
Microcode Update Driver: v2.00 removed.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (15968 buckets, 63872 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
e1000e 0000:01:00.0: irq 27 for MSI/MSI-X
e1000e 0000:01:00.0: irq 27 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e 0000:02:00.0: irq 28 for MSI/MSI-X
e1000e 0000:02:00.0: irq 28 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth1: link is not ready
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
0000:01:00.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
eth0: no IPv6 routers present
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
fuse init (API version 7.13)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
[root@localhost ~]#
3.6
PCI Device 情報
[root@localhost ~]# lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1e.2 Multimedia audio controller: Intel Corporation 82801G (ICH7 Family) AC'97 Audio Controller (rev 02)
00:1f.0 ISA bridge: Intel Corporation 82801GHM (ICH7-M DH) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
01:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
[root@localhost ~]#
- 26 -
3 付録
3.7
システムロードモジュール
[root@localhost ~]# lsmod
Module
Size
vfat
8677
fat
47151
Used by
0
1 vfat
fuse
56128
2
autofs4
21604
3
sunrpc
197617
1
cpufreq_ondemand
acpi_cpufreq
ipt_REJECT
8454
7384
2
0
1905
2
nf_conntrack_ipv4
7700
2
nf_defrag_ipv4
1013
1 nf_conntrack_ipv4
iptable_filter
ip_tables
ip6t_REJECT
2147
1
9541
1 iptable_filter
3961
nf_conntrack_ipv6
16198
xt_state
1006
nf_conntrack
66010
2
2
4
ip6table_filter
2219
ip6_tables
10809
ipv6
264702
3 nf_conntrack_ipv4,nf_conntrack_ipv6,xt_state
1
1 ip6table_filter
30 ip6t_REJECT,nf_conntrack_ipv6
dm_mirror
11620
0
dm_region_hash
10127
1 dm_mirror
dm_log
8520
2 dm_mirror,dm_region_hash
uinput
6218
0
24778
0
sg
serio_raw
3760
0
i2c_i801
9222
0
iTCO_wdt
iTCO_vendor_support
snd_intel8x0
snd_ac97_codec
ac97_bus
snd_seq
9324
0
2382
24319
95678
1 snd_intel8x0
942
1 snd_ac97_codec
46091
0
snd_seq_device
5354
snd_pcm
67225
snd_timer
18308
snd
52722
1 iTCO_wdt
2
1 snd_seq
2 snd_intel8x0,snd_ac97_codec
2 snd_seq,snd_pcm
10 snd_intel8x0,snd_ac97_codec,snd_seq,snd_seq_device,snd_pcm,snd_timer
soundcore
6460
1 snd
snd_page_alloc
7080
2 snd_intel8x0,snd_pcm
e1000e
121856
0
ext4
322814
2
mbcache
jbd2
sd_mod
crc_t10dif
pata_acpi
5918
73876
1 ext4
1 ext4
33344
1191
2487
3
1 sd_mod
0
- 27 -
3 付録
ata_generic
2555
0
ata_piix
19016
2
i915
290623
2
drm_kms_helper
29029
1 i915
drm
162327
i2c_algo_bit
4600
1 i915
i2c_core
25799
5 i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit
video
16662
1 i915
output
dm_mod
3 i915,drm_kms_helper
1779
63859
1 video
8 dm_mirror,dm_log
[root@localhost ~]#
- 28 -
3 付録
3.8
バージョン情報
[root@localhost ~]# cat /proc/version
Linux version 2.6.32-71.el6.i686 ([email protected]) (gcc version 4.4.4 20100726 (Red Hat 4.4.4-13) (GCC) ) #1 SMP Fri Nov 12 04:17:17
GMT 2010
[root@localhost ~]#
3.9
IRQ 利用情報
[root@localhost ~]# cat /proc/interrupts
CPU0
CPU1
0:
160
0 IO-APIC-edge
timer
1:
2
0 IO-APIC-edge
i8042
3:
4
0 IO-APIC-edge
4:
3
0 IO-APIC-edge
6:
2
0 IO-APIC-edge
7:
2
0 IO-APIC-edge
8:
1
0 IO-APIC-edge
rtc0
9:
0
0 IO-APIC-fasteoi
acpi
14:
39967
0 IO-APIC-edge
ata_piix
15:
0
0 IO-APIC-edge
ata_piix
16:
1
1260 IO-APIC-fasteoi
uhci_hcd:usb5, i915
17:
594
0 IO-APIC-fasteoi
Intel ICH7
18:
0
0 IO-APIC-fasteoi
uhci_hcd:usb4
19:
75
8597 IO-APIC-fasteoi
uhci_hcd:usb3
23:
3
0 IO-APIC-fasteoi
ehci_hcd:usb1, uhci_hcd:usb2
27:
9
8760 PCI-MSI-edge
eth0
28:
2128
0 PCI-MSI-edge
eth1
NMI:
0
0 Non-maskable interrupts
LOC:
492740
460713 Local timer interrupts
SPU:
0
0 Spurious interrupts
PMI:
0
0 Performance monitoring interrupts
PND:
0
0 Performance pending work
RES:
4515
3944 Rescheduling interrupts
CAL:
191
122 Function call interrupts
TLB:
8624
5235 TLB shootdowns
TRM:
0
0 Thermal event interrupts
THR:
0
0 Threshold APIC interrupts
MCE:
0
0 Machine check exceptions
MCP:
15
15 Machine check polls
ERR:
1
MIS:
0
[root@localhost ~]#
- 29 -
3 付録
3.10
I/O ポート利用情報
[root@localhost ~]# cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0073 : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:1f.1
0170-0177 : ata_piix
01f0-01f7 : 0000:00:1f.1
01f0-01f7 : ata_piix
02a8-02af : serial
02b0-02b7 : serial
02f8-02ff : serial
0376-0376 : 0000:00:1f.1
0376-0376 : ata_piix
03c0-03df : vga+
03f6-03f6 : 0000:00:1f.1
03f6-03f6 : ata_piix
03f8-03ff : serial
0400-047f : 0000:00:1f.0
0400-0403 : ACPI PM1a_EVT_BLK
0404-0405 : ACPI PM1a_CNT_BLK
0408-040b : ACPI PM_TMR
0428-042f : ACPI GPE0_BLK
0430-0433 : iTCO_wdt
0460-047f : iTCO_wdt
0480-04bf : 0000:00:1f.0
04d0-04d1 : pnp 00:01
0500-051f : 0000:00:1f.3
0500-051f : i801_smbus
0680-06ff : pnp 00:01
0880-088f : pnp 00:01
0cf8-0cff : PCI conf1
b000-bfff : PCI Bus 0000:03
c000-cfff : PCI Bus 0000:02
cf00-cf1f : 0000:02:00.0
d000-dfff : PCI Bus 0000:04
e000-efff : PCI Bus 0000:01
ef00-ef1f : 0000:01:00.0
f200-f2ff : 0000:00:1e.2
f200-f2ff : Intel ICH7
f800-f80f : 0000:00:1f.1
f800-f80f : ata_piix
fa00-fa3f : 0000:00:1e.2
fa00-fa3f : Intel ICH7
fb00-fb1f : 0000:00:1d.3
fb00-fb1f : uhci_hcd
fc00-fc1f : 0000:00:1d.2
fc00-fc1f : uhci_hcd
fd00-fd1f : 0000:00:1d.1
fd00-fd1f : uhci_hcd
fe00-fe1f : 0000:00:1d.0
fe00-fe1f : uhci_hcd
ff00-ff07 : 0000:00:02.0
[root@localhost ~]#
発行
株式会社コンテック
大阪市西淀川区姫里3-9-31 〒555-0025
日本語 http://www.contec.co.jp/
英語
http://www.contec.com/
NA02410 (LYPY041)
中国語 http://www.contec.com.cn/
[10192012]
本製品および本書は著作権法によって保護されていますので無断で複写、複製、転載、改変することは禁じられています。

Download Report