タカショー ガーデンファニチャー アクセサリー アールトレリス S 4枚組み

CONTROLLED
COPY
BEPL/ML/PS/14
PRODUCT SPECIFICATION
GRADE
FEATURE
PRESENTATION
ABSTRON HR-59
MEDIUM FLOW,HEAT RESISTANT GRADE
NATURAL OR PRE COLOURED
TYPICAL PROPERTY DATA
PROPERTIES
ASTM
TEST
TEST
CONDITION
METHOD
PHYSICAL PROPERTIES at 23 deg C
Melt Flow Rate
D-1238
Specific Gravity*
D-792
220°C/10kg
UNIT
INJECTION TOLERANCE Page No:01 of 01
MOULDED
Issue No: 02
VALUE
Issue Date: 13/10/03
Revision No: 01
Revision Date:21/10/03
gm/10 min
22
+/- 4
-
1.045
+/- 0.005
°C
97
+/- 2
-
HB
-
THERMAL PROPERTIES
Heat Deflection Temeprature*
12.7mm x 6.4mm x 127mm Bar
D-648
Flammability Rating at 0.32 cm*
UL-94
18.56 Kg/cm²
Annealed at
85 Deg C/2 Hr
MECHANICAL PROPERTIES
Notched Izod Impact Strength
D-256
D-256
6.4 mm
3.2 mm
Kgf cm/cm
Kgf cm/cm
20
22
+/- 3
+/- 3
Tensile Strength at yield *
D-638
50 mm/min
Kg/cm²
500
+/- 20
Tensile Strength at yield
D-638
5 mm/min
Kg/cm²
460
+/- 20
Yield Flexural Strength*
D-790
5 mm/min
Kg/cm²
700
+/- 20
Flexural Modulus*
D-790
5 mm/min
Kg/cm²
23000
+/- 500
Hardness, Rockwell R
D-785
R-scale
114
+/- 2
* To be measured as and when necessary
* It is necessary to pre-dry material at 85~900C for 2 to 3 hours prior to processing.
* Injection molding conditions- 190 - 230oC
* Disclaimer - The values have been determined on standard Test specimens made in Natural colour
using injection moulding.We do not stand warranty of any type that these values are reproducible
as the physical and other properties will vary subject to moulding conditions, test specimen preparation etc.