論文募集 英語論文誌 e-Journal of Soft Materials” 創刊のお知らせ 世界のゴム科学・技術・工業の目覚しい発展にわが国が果たした役割はきわめて多 大であり、その成果の一部は日本ゴム協会誌にて発表されています。しかし、 「ゴム」 あるいは「エラストマー」を中心とした Soft Materials の分野で年間3000報以上の 論文が世界で報告され、中でも英語による論文が 80%近くを占めています。貴方の 研究を世界に発信するには英語論文がベストです。 ゴムに関する英語論文なら、Rubber Chemistry & Technology(RCT)があると思われ るかもしれません。しかし、RCT に掲載された論文は世界中のゴム関連論文の2%に も満たないものです。これは、誰もがアクセス可能で、広く普及しているゴム分野の 論文誌が欠如していることによります。投稿意欲をそそるほどに魅力ある雑誌はいわ ゆる3C(Contents, Circulation, and Citation)に優れた雑誌です。いまや高速インター ネットの時代。これからの時代をリードする、3C に優れた雑誌はオンライン・ジャ ーナルです。 そこで、2005年初夏に日本ゴム協会より、オープンアクセス・オンライン・ジャ ーナル e-Journal of Soft Materials”を創刊することになりました。もちろんオンライ ン・ジャーナルですから、カラー図版、動画やアニメを駆使した電子付録などを自由 に使って、魅力あふれる論文を掲載できます。貴方の優れた研究を世界に発信する e-Journal of Soft Materials 。ご投稿をお待ちしています。 Journal Information 1. Title e-Journal of Soft Materials 2. Aims and Scope e-Journal of Soft Materials (e-J. Soft Mater.) adapts to better meet the needs of scientists and engineers both in academia and industry who are participating in the fields of soft materials, and their basis and solution-oriented applications. The e-JSM offers rapid on-line publication of articles within 4 weeks of acceptance; where available it uses colorful tools including movies, animations, computer graphics and figures. The e-JSM aims to become the primary journal of interdisciplinary research and development on soft materials. The e-JSM is to publish original and review articles of the highest quality. Review articles will normally be published by invitation only. 3. Features Web-oriented, Online Journal - Electronic Journal via J-Stage ( http://www.jstage.jst.go.jp/browse/ejsm/ ) without printed version - Free Contribution, Free Access, and Free Download - Colored Movies, Animations, and Computer Graphics available as supplementary materials - Colored Figures and Remarks - Full Text Search - Direct link to references such as JOIS, ChemPort, Crossref without additional charge Quick Publication All on-line processes, submission, reviewing, and proofing Up-to-the minute appearance following acceptance High quality All manuscripts reviewed by a prestigious panel of reviewers. 4. Paper Category ・ Regular Articles ・ Review Articles 5. Subjects covered in e-Journal of Soft Materials All the fields of science and engineering on soft materials in chemistry, physics, agriculture, mechanical engineering, electrical engineering, chemical engineering, plastic engineering, civil engineering, architecture engineering, computer-aided science and engineering, and so on. e-Journal of Soft Materials Guidelines for Authors (updated) Submission of Manuscript Journal manuscript should be submitted via our online submission page. Please visit our journal homepage (http://www.srij.or.jp/ejsm/). The editor welcomes the regular articles but will consider only those that have not been and are not to be published elsewhere. The papers must be written in English. Authors can use remarks and figures in color, as well as colored movies, animations, and computer graphics as supplementary materials. Authors are requested to specify the place where the figures and tables should be inserted with marginal comments. Accepted manuscripts will be copy-edited for publication. Preparation of Manuscript Manuscript: Type manuscripts in double-space using A4 or US Letter size paper with 25mm margins. When you prepare the manuscript using MS-Word, please use Times (or Times New Roman) and Symbol fonts with 12 point and the default setting for numbers of lines and characters besides margins. In the format, two-and-a-half typewritten pages correspond to one page in publication. One figure having typical size of 8.25cm width and 5.9cm height may correspond to 1/6 page in publication; this applies to tables, as well. The editor will offer 6 pages in publication for each regular article. (See the items 13 and 14. “Length of Manuscripts” and “Page Charge”. ) The main text should consist of the following items in the order presented. 1. Title: Title should clearly and concisely reflect the emphasis and content of the paper. We do not recommend the use of serial numerals in the title (e.g., “broad topic. 2. specific subject”). 2. Author(s): Each author should be identified by affiliation. Use first names, initials, and surnames (e.g., Taro A. Nihon). At least one author must be distinguished with an asterisk as the person to whom correspondence should be addressed. 3. Affiliation(s) The affiliation of each author should be followed by complete postal address including zip code. Presentation of the e-mail address is preferable, if the author(s) does not mind. 4. Abstract: An abstract must be provided. The abstract should be written in concise English using less than 200 words. It should be presented in a findings-oriented format. 5. Keywords: Authors are requested to give maximum eight keywords. 6. Main text: The text of the paper may be arranged at the author’s discretion but an order of Introduction, Experimental, Results, and Discussion is recommended. Authors can use various characters in bold face and/or colored, underlines, and so on. There are no restrictions except font specified, Times (or Times New Roman) and Symbol. In the Experimental section, authors should provide a clear description of materials, methods, and equipment in sufficient detail to permit repetition of the work elsewhere. However, repetitive descriptions of a general procedure should be avoided. Equations should be made using suitable editor of mathematical equations such as that provided by MS-Word or its equivalent. Never paste images of equations copied. 7. Appendices: You can add appendices for related subjects up to four files. You can add movies, animations, computer graphics, and so on as electronic appendices. They facilitate the readers’ understanding. Various formats of file are acceptable, but you should consider size of files from the viewpoint of readers’ ease in downloading. In addition you should consider the circumstances on readers’ PC. Please show how to download the free, special software, if it is required to show your electronic appendices. 8. References: It is the responsibility of authors to ensure the accuracy of references. Because almost of the references are linked directly to various online databases such as JOIS, ChemPort, CrossRef, reference accuracy is critical. Correct abbreviations of journal names are strictly required to make automatic links to the references by J-Link System of J-Stage. Please visit, for example, http://wos.isiknowledge.com/help/D_abrvjt.html for correct journal titles and abbreviations. Internet Web pages are also acceptable as references (e.g., movies and animations). References should be numbered consecutively in the main text using brackets, for example, “ as discussed by some researchers [1,2].”, and listed at the end of the text as follows. [1] Ferry J. D.: Nippon Gomu Kyokaishi, 70, 651 (1997). [2] Freakley P. K., Payne A. R.: “Theory and Practice of Engineering with Rubber”, Appl. Sci. Pub., London (1978). (For books; Authors: Title, Publisher, City, Year) [3] Gent, A. N., Scott, K. W.: “Engineering with Rubber“, Ed. Gent, A. N., Hanser Pub., Munich/ Vienna/ New York (1992), p. 67. (For papers in books; Authors: Book Title, Editors, Publisher, City, Year, Page) [4] For a movie, visit http://www.jstage.jst.go.jp/browse/ejsm/ In the case of multiple authorship, all authors should be listed in the references if less than ten authors. Only in the case of more than ten authors, a style of “First Ten Authors, and others” is acceptable. 9. Figure captions: Concise and self-contained captions should be shown in the bottom area in every figure as well as list of figure captions on separate page. 10. Tables: Tables should be kept to a minimum. The same data should not be reproduced in both tabular and diagrammatic forms. Tables should be made simply using MS-Excel. Redundant table editing is not required. 11. Units and Abbreviations Use metric and the International System of Units (SI units) as primary units. SI units are strongly encouraged (Exception: conventional unit used widely in rubber field, e.g. phr). 12. Nomenclature Nomenclature should be clear, consistent, and unambiguous, and should conform as closely as possible to the rules established by IUPAC, and other appropriate bodies. Guides to IUPAC recommendations on macromolecular nomenclature are available via the Internet at http://www.iupac.org/publications/books/author/metanomski.html and http://www.iupac.org/reports/IV/guide.html. 13. Length of Manuscripts: The manuscript should be prepared within 4,300-4,700 words including figures and tables, which corresponds to 6 pages in A4 size paper for publication. 14. Page Charge Authors are not charged, in the case of regular papers, if the length of the paper is within the limitation in publication (6 pages, tentatively). If it exceeds this limitation, some page charge may be required. Files: You can submit all the files including text, figures and tables, (and supplementary materials) within 50MB at one time. If your manuscript exceeds this limitation, please send the files using CD-ROM. Size: The total size of the files less than 50MB is preferable. Even if it exceeds this limitation, we may accept in some cases. Please contact the editor, [email protected]. Format: Acceptable file name extensions are limited to the following: - for main text doc - for figures jpg, tif, eps, doc, xls, and ppt - for tables xls only (The author(s) do not need to make redundant editing.) The author(s) are requested to prepare one file for each figure or table. File Names: For security reason, file names (within 31 characters for each file) must be designated using the alphabetical and numerical characters, and two additional symbols (hyphen and underscore). Macintosh user must give your file names including suitable extension. Never use Japanese characters--not only in text, figures, and tables, but also in file names. File names should be made on the basis of figure or table numbers, e.g., fig1.jpg, fig2.ppt, table1.xls, and so forth. Main Text: Only MS-Word file is acceptable. The main text, figures, and tables, (and supplementary materials, if any) should be prepared in separate files. The MS-WORD file for text should not contain figures, tables and supplementary materials. Artwork: Figures and tables are acceptable only in JPG, TIFF, EPS or MS Office files (Word, Excel, and Power Point) format. JPG format is strongly recommended from the standpoint of the amount of file size. Figures are reduced normally to 8.25cm width for single-column format. The author(s) are requested to prepare the artwork that will be clear enough in the reduced scale. Be sure to use lines that are thick enough. You can prepare scientific graph(s) using technical 2D or 3D graphics and data analysis software(s). But be sure to convert the graphics file(s) to JPG, TIFF or EPS format. Never submit the original file(s) prepared using graphics software. Never paste images of artwork(s) made using graphics software onto MS Office file(s) - JPG and TIFF JPG and TIFF are the recommended file format for line drawing, grayscale, and color images. The files are supplied at the correct resolution: line artwork: 1200 dpi or higher halftone artwork: 266 dpi or higher combination artwork of line and halftone: 800 dpi or higher color artwork: 350 dpi or higher combination artwork of line and color: 600 dpi or higher. Be sure to embed fonts of Arial, Courier, Helvetica, Times or Symbols. The resolution above should be applied for the line artworks (such as various spectra) and the pictures taken with scanner as well. EPS For vector graphics, EPS (Encapsulated PostScript) files are preferred. Be sure to embed fonts of Arial, Courier, Helvetica, Times or Symbols. MS Office (Word, Excel, and PowerPoint figures) We accept only the artworks made in the circumstance of MS Office, if you submit artwork(s) using MS Office file(s). Be sure never to paste images of artworks made using other software except ChemDraw for drawing chemical formula. Supplementary Materials: For supplementary materials such as movies, animation, computer graphics, and so on, files to be replayed using Windows Media Player or Real Player are recommended. Of course, various file formats are available. Please contact the editor for details. For the supplementary materials, preparation of logo-bearing file(s) is recommended to clarify your original works. Reprint Reprint is available for author(s). Please visit our journal homepage for details (http://www.srij.or.jp/ejsm). Copyright Transfer No article can be published unless accompanied by a signed publication agreement, which serves as a transfer of copyright from author to publisher. Only original papers will be accepted and copyright in published papers will be vested in the Soc. Rubber Ind., Japan. After acceptance of the manuscript, the author(s) will receive the Copyright Transfer Form as an electrical file. The completed Copyright Transfer Status Form should be sent back to the e-Journal of Soft Materials Office (c/o The Society of Rubber Industry, Japan, 1-5-26 Moto-Akasaka, Minato-ku, Tokyo 107-0051, JAPAN) by Air Mail (outside Japan) and Surface Mail (inside Japan). It is the author's responsibility to obtain written permission to reproduce material that has appeared in another publication. If the paper is a “work made for hire,” the Copyright Transfer Agreement must be signed by the employer. Contact e-Journal of Soft Materials Office c/o The Society of Rubber Industry, Japan 1-5-26 Moto-Akasaka, Minato-ku, Tokyo 107-0051, JAPAN Fax +81-3-3401-2957 E-mail: [email protected] Web: http://www.srij.or.jp/ejsm/
© Copyright 2024 Paperzz