Cured-in-place Pipe Market

Cured-in-place Pipe Market - Global
Industry Insights, Trends, 2018-2026
The cured-in-place pipe (CIPP) technique is a trenchless rehabilitation method that is
used for repairing pipelines. CIPP is a seamless, joint less pipe that is present within
another pipe that has the capability to naturalize pipes that have diameters ranging
between 0.1 to 2.8 meters. It is the most widely used trenchless rehabilitation method.
CIPP is used for application in water, gas, and sewer pipes amongst others. There is a
little to no digging involved in this trenchless CIPP process. During this method of
rehabilitation, the damaged pipeline is infused with a resin material that coats the walls
on the interior. This results in creation of a new pipeline that exists within the existing
pipelines without the need to physically expose it by physical processes such as
digging. Unlike conventional pipe repair methods, CIPP is completed within a short span
of a few short hours while not having the need to stop the usage of the pipeline for
weeks for repair.
Market Dynamics
The aging sewage and drinking water pipelines in numerous economies, rising
spending by municipal corporations, and need to repair public utilities along with rising
awareness of the advantages of trenchless rehabilitation techniques, and the
advantages of CIPP over the other trenchless techniques are major drivers positively
impacting growth of the global CIPP market. According to the Center for American
Progress as much as 20-25% of the treated water that entered the distribution system
was lost due to leakage, resulting in an estimated 1.7 trillion gallons of water being
wasted in 2016 in the U.S. Factors such as these could result in an increase in the
demand for CIPP rehabilitation techniques.
Download PDF Brochure at :
https://www.coherentmarketinsights.com/insight/request-pdf/1562
However, new liners need to be developed for different CIPPs depending on the
requirement. Obstructions that are present in the pipeline need to be removed before
installation. The liner is made up of a felted textile and does not bend without wrinkling
on corners. The liners that are in pipes that bend are made up of woven fabric that
allows it to turn around the bends with negligible wrinkling. It is necessary that the liner
be properly handled during inversion in order to guarantee that the liner rests in its
position. These are some of the major restraints that are expected to affect the growth
of the cured in place pipe market.
Market Trends
Polyester segment was dominant in 2017 and is expected to retain its dominance in the
global CIPP market during the forecast period. This is owing to property of polyester to
infuse well with the liner material and can be dried easily even at lower temperatures.
The other advantages of this resin includes, its higher flexural modulus, lower tensile
strength coupled with a higher chemical resistance as compared to other resins.
Polyester segment is estimated to be dominant in the fabric segment in 2018. Polyester
has a greater tensile strength while meeting the required ASTM D461 standard needed
for the felt at competitive prices as compared to glass fabrics.
Steam was the most dominant segment in curing methods in 2017 and is expected to
continue its dominance through 2025. The overall time that is required for curing in the
steam curing is lower as compared to other curing methods as the time required for
heat transfer in the steam curing process is much lower as compared to hot water. The
UV curing method is expected to exhibit the fastest growth rate during the forecast
period as UV liners are not affected by temperature and hence can be easily
transported to the required job site. These liners are also 3-5 times tougher than
conventional CIPP liners.
Market Outlook
North America is estimated to be the most dominant region in the CIPP market in 2018
and is expected to continue its dominance during the forecast period. This is owing to
presence of high volume of pipelines in North America especially, the U.S. According to
the BlueGreen Alliance Foundation an environment and labor organization, the U.S.
alone has approximately 0.8 million miles of drainage pipes and also 0.5 million miles of
lateral based sewers and that are above 60 years old and needed repairing in 2016.
Apart from this, in the U.S., in 2016, around 9% or around 112,000 miles of the nation’s
natural gas distribution pipelines were made from leak prone materials such as cast
iron, bare steel or unprotected coated steel and needed repairing. This is expected to
drive demand for CIPP in North America.
Key Players
Major players operating in the CIPP market include iMPREG GmbH, Layne Inliner LLC,
Insituform Technologies Inc., Inland Pipe Rehabilitation Ashimori Industry Co. Ltd.,
Reline Europe AG, Norditube Technologies, and Saertex MultiCom GmbH.
For More Information :
https://www.coherentmarketinsights.com/ongoing-insight/cured-in-place-pipe-market-1562
About Coherent Market Insights:
Coherent Market Insights is a prominent market research and consulting firm offering
action-ready syndicated research reports, custom market analysis, consulting services,
and competitive analysis through various recommendations related to emerging market
trends, technologies, and potential absolute dollar opportunity.
Contact Us:
Mr. Shah
Coherent Market Insights
1001 4th Ave,
#3200
Seattle, WA 98154
Tel: +1-206-701-6702
Email: [email protected]

The research report on cured-in-place pipe (CIPP) market categorizes the global market by resin type (Polyester, Glass, and Others), by fabric type (Polyester, Glass, and Others), by cure type (Hot Water, Steam, and UV Cure), by weaving type

Download Report