STP : FLEXIBLE SEPARATOR TO THE ELECTRICAL TRANSFORMER MARKET 1 DESCRIPTION PRONAL, the world leader in the manufacture of products based upon elastomer-coated fabrics offers the STP flexible separator to the electrical transformer market. The function of the STP separator is to line inside of the conservator tank in transformers, allowing for changes in oil volume, while protecting the oil from any type of contamination or external corrosive agents, such as air, ozone, nitrogen, humidity, etc. STP separators are made from an elastomer-coated fabric, vulcanized at high temperature in a vacuum: fabric reinforcement made of a high resistance polyamide thread, external coating designed to provide very high resistance to transformer oil, internal protection resistant to nitrogen and atmospheric agents including ozone. It offers a large range of elastomers to meet specific applications and a wide range of shapes and sizes to fit every need. Designs exit to fit cylindrical, elliptical and rectangular conservator tanks. The STP separator offers many advantages: - Elimination of the air/oil contact, and of condensation - Vulcanized-in flange which precludes the possibility of leakage - Elimination of oxidation and hydrolysis that might stem from air contact - Interior fabric reinforcement at points of contact with level indicator, to preclude the possibility of puncture - Excellent impermeability to oil/gases and water vapour, through the use of a vulcanised-in barrier material - Quick-Response Manufacturing to meet customer designs - Large range of flanges to meet any requirement - Easy quick assembly - Superb service life in contact with air and oil - High mechanical resistance www.pronal.com STP : FLEXIBLE SEPARATOR 2 STANDARD EQUIPMENT FLANGE: TYPE B1 Separator connection flange on conservator. All other models on request. Conservator Separator Flange FLANGE ASSEMBLY OF TYPE B1 FLANGE The connection flange type B1 is shown on the conservator (several other models available). The flange is secured to the vulcanized insert. This insert is fully embedded by vulcanizing into the STP material thus ensuring that the unit is fully sealed. STP ATTACHMENT LUGS Typically, the STPs are fitted with 2 attachment lugs, located in a precisely-defined position. Special positions or additional lugs are available upon request. ATTACHMENT LUG 3 Securing attachment lug on the conservator. OPERATING PRINCIPLE 1 FLANGE 2 SECURING HOOK AND ATTACHMENT LUG www.pronal.com 3 LEVEL INDICATOR STP : FLEXIBLE SEPARATOR 4 DIMENSIONS The dimensions of the STP separator and its attachment lugs are defined using the dimensions of the conservator tank itself. As an example, please find below several models of STP separators manufactured for cylindrical conservators with flat ends. SIDE VIEW AS ASSEMBLED TOP VIEW UNINFLATED CONSERVATOR SEPARATOR STP TYPE F1 Ø (mm) Length (mm) Volume (l) D L 500 2 710 530 600 1 970 600 Expansion volume (l) Length (mm) Width (mm) Distance between axes (mm) X Y Z 500 3 035 825 2 010 96 560 500 2 350 980 1 170 90 2 850 810 750 3 230 980 2 050 83 700 2 180 840 750 2 620 1 140 1 280 89 700 2 830 1 090 1 000 3 270 1 140 1 930 92 800 2 260 1 130 1 000 2 760 1 300 1 260 88 800 3 250 1 630 1 500 3 750 1 300 2 250 92 900 2 660 1 690 1 500 3 215 1 455 1 560 89 900 3 440 2 190 2 000 3 995 1 455 2 340 91 1 000 2 880 2 260 2 000 3 490 1 610 1 680 88 1 000 3 520 2 760 2 500 4 130 1 610 2 320 91 1 100 3 000 2 850 2 500 3 670 1 770 1 700 88 1 100 3 520 3 350 3 000 4 190 1 770 2 220 90 1 200 3 050 3 450 3 000 3 775 1 925 1 650 87 1 200 3 940 4 460 4 000 4 665 1 925 2 540 90 1 300 3 450 4 580 4 000 4 230 2 080 1 950 87 1 300 4 200 5 580 5 000 4 980 2 080 2 700 90 1 400 3 710 5 720 5 000 4 550 2 240 2 110 87 1 400 4 360 6 720 6 000 5 200 2 240 2 760 89 1 500 3 900 6 880 6 000 4 795 2 395 2 200 87 Other hoop positions available on request. Additional hoops on request. www.pronal.com Occupation rate % STP : FLEXIBLE SEPARATOR 5 SHAPES OF SEPARATORS AND CALCULATION FORMULAS * CYLINDRICAL CONSERVATOR ** X (mm) = Length of conservator + Y – Diameter of conservator Y (mm) = (П x Conservator diameter) + 40 mm 2 Z (mm) = X – Y – 200 mm X : flat (fully deflated) length of the STP Y : flat (fully deflated) width of the STP Z : pitch distance of lugs * CUSTOMER SPECIAL REQUEST CONSERVATOR ELLIPTICAL CONSERVATOR X (mm) = length of conservator + 40 mm Y (mm) = ½ developed length of the conservator Z (mm) = X – (H x П) – 200 mm 2 X (mm) = length of conservator + 40 mm Y (mm) = A + 2 x B + c 2 Z (mm) = X – (H x П) – 200 mm 2 ** ** X : flat (fully deflated) length of the STP Z : pitch distance of lugs * Y : flat (fully deflated) width of the STP H : conservator height ** RECTANGULAR CONSERVATOR X (mm) = length of conservator + 40 mm Y (mm) = width of conservator + H + 40 mm Z (mm) = X – (H x П) – 200 mm 2 X : flat (fully deflated) length of the STP Z : pitch distance of lugs Y : flat (fully deflated) width of the STP H : conservator height Other conservator shapes available on request. 6 * SEPARATOR SHAPE ** CONSERVATOR SHAPE LEVEL INDICATOR The following table is used to select the type of level indicator (IDN), according to the diameter of the conservator. Any non-standard indicator can be installed on request. Type Ø conservator Float rod length Type Ø conservator Float rod length IDN 1 500 370 IDN 7 1 100 1 030 IDN 2 600 480 IDN 8 1 200 1 140 IDN 3 700 590 IDN 9 1 300 1 250 IDN 4 800 700 IDN 10 1 400 1 360 IDN 5 900 810 IDN 11 1 500 1 470 IDN 7 1 000 920 These types of indicators may be delivered with or without 1 or 2 magnetic contacts (assembly details on request). PRONAL proposes standards dials but other types may be proposed on request. Always concerned with the improvement of the quality of its products, Pronal reserves the right to modify specifications without prior notice PRONAL S.A. - Z.I. ROUBAIX EST - B.P. 18 - 59115 LEERS - FRANCE - TEL: 33 (0) 3.20.99.75.00 - FAX: 33 (0) 3.20.99.75.20 www.pronal.com - E.mail : [email protected]
© Copyright 2024 Paperzz