Tractor Parts Catalogue 2011-12 Including Tracks and Seeder Fans Agents for Bareco Bareco have a huge range of day to day requirements as well as thousands of tractor parts. Check the website www.bareco.com.au for easy to use access to a detailed listing of products. PTO SHAFTS & PARTS HYDRAULICS LINCH & “R” CLIPS EXHAUST PINS TIE-DOWN STRAPS CHAINS & HOOKS BOOSTER CABLES HYDRAULIC JACKS LIGHTING “O” RINGS FILTERS Harvest Catalo warranty Harvestaire warrant that it will repair or replace (whichever it deems advisable) any product manufactured and sold by it which it proves to be defective in material or workmanship with a period of, one year for new parts from the date of original purchase. Warranty service can be obtained by returning any defective product to Harvestaire. A purchase receipt or other proof of original purchase may be required before warranty service is rendered. If found defective under the terms of this warranty, repair or replacement will be made, without charge, together with a refund for transportation costs. if found not to be defective you will be notified and, with your consent, returned to you at your expense. The warranty covers normal use and does not cover damage or defect which results from alteration, accident, neglect or improper installation, operation or maintenance. Harvestaire’s obligation under this warranty is limited to the repair of replacement of the defective product (up to maximum purchase price). Harvestaire neither assumes or authorises any other person to give any other warranty or to assume any other obligation or liability on its behalf. Telephone: 9344 7433 Facsim ile: 9345 3256 18 Mumford Place Balcatta Weste Email: sales@ rn Australia 6021 harvestaire.c om.au Web Site: www.harvest aire.com.au parts return policy 1. Within 30 days of invoice date - No penalty (provided our suppliers don’t charge a penalty) 2. 30 days plus of invoice date - A restocking fee may be charged depending on circumstances. 3. After 90 days - Non-refundable. Special Buy-in items or made to order items are non-refundable. Most parts in this catalogue are not manufactured by the Original Equipment Manufacturer. Original Equipment Manufacturers names, part numbers and descriptions are quoted for reference purposes only. gue 2011-12 For a full range of Harvest products see our 2011-12 Catalogue All new parts are guaranteed to be interchangeable and be the functional equivalent of the O.E.M. parts they are intended to replace. TOP QUALITY PARTS All our parts are sourced from Australian, American and European manufacturers. They are manufactured to very high standards. They have been sold around Australia for over 20 years and have achieved real savings for many thousands of farmers. At Harvestaire our policy is to provide an equivalent or better product at a better price. Contents Replacement Tracks ..................................................................................................................................................................................................................................................... 2-3 Combine Seeder Air Kit ................................................................................................................................................................................................................................................ 4 Electric Linear Actuators ............................................................................................................................................................................................................................................ 5 Hay Loader Tynes .................................................................................................................................................................................................................................................................... 6 PTO Adaptors .................................................................................................................................................................................................................................................................................. 6 Replacement Tractor Parts Allis Chalmers.................................................................................................................................................................................................................................................................................. 7 ESTAIRE IS V R A H Case ........................................................................................................................................................................................................................................................................................................ 8-10 EST PROUDLY W WNED NO Chamberlain ..................................................................................................................................................................................................................................................................... 11-15 AUSTRALIA RATED AND OPE Ford ................................................................................................................................................................................................................................................................................................... 16-19 International ..................................................................................................................................................................................................................................................................... 20-28 John Deere .......................................................................................................................................................................................................................................................................... 29-35 Massey Ferguson ..................................................................................................................................................................................................................................................... 36-40 Steiger Transmission Parts ................................................................................................................................................................................................................................. 40 Air Seeder Fans .................................................................................................................................................................................................................. Inside Rear Cover D-Cup Diffuser — for Airseeders ....................................................................................................................................................... Inside Rear Cover This catalogue is marked 2011-12. It is expected that almost all prices will be maintained until the release of the next catalogue in August 2012. Replacement Track prices are subject to confirmation after December 31st 2011. PRICES EXCLUDE GST. Telephone 9344 7433 - Facsimile 9345 3256 18 Mumford Place Balcatta, Western Australia 6021 Email: [email protected] Website: www.harvestaire.com.au After Hours: Dean Brooks: Mobile: 0428 246 422 Replacements parts advertised in this catalogue are not original equipment. Any OEM Part No’s shown are for reference only. 9344 7433 1 Replacement Tracks From the exclusive supplier to Caterpillar, Agco, John Deere, and an alternative for Case-IH Quadtrac Durabuilt™ 3500 A premium track for use in primary Durabuilt™ Tracks The Durabuilt™ family of tracks delivers the ultimate in performance and durability. Made from premium quality rubber and steel, and precision-assembled to the strictest tolerances using the most advanced technologies, Durabuilt™ tracks are recognised by their users as the best in the world. They’ve been the only track for the Challenger tractor line since the beginning. Exacure™ Ultimate Cure Technology The result of millions of dollars of investment in R&D, our exclusive ExaCure™ technology ensures absolute rubber curing uniformity throughout the track. This revolutionary single cure process is the ultimate answer to eliminating wear zones and crack initiation. It provides Durabuilt™ products with the utmost durability right from the start. Breakshield™ Super-Strength Construction Our BreakShield™ super-strength assembly process flawlessly positions every layer of rubber, steel cables and reinforcement plies, resulting in a perfectly uniform track carcass armoured to resist cable breakouts and punctures. The BreakShield™ carcass also delivers outstanding lateral stability, alignability and fuel consumption. tillage. High rubber volume in the tread bars provides long application life. In 2005 this became the standard John Deere 8020T Series factory fitted track. 3500 Grade or its predecessor 2500 Grade have always been original on CAT Challenger. Durabuilt™ 5500 Ultimate durability premium track Contains 30% more rubber and 20% more steel than the 3500 grade. Hyperlife™ Rubber Compounds Extended life in the toughest abrasive The same extreme applications compounds used in aircraft and race cars provide extreme resistance to wear and unmatched durability of treadbars and guide blocks. in the industry with the greatest conditions. The heaviest track available strength. Extra high and wide tread Optimum Traction Design Treads custom designed for specific row crop or tillage applications and engineered for superior traction and reduced vibration deliver a smoother ride, no slippage and maximised service life. Various tread shapes and spacings are available. Anti-Corrosion Protection Maximum rubber encapsulation of reinforcing steel cables during manufacturing prevents corrosion and ensures optimal performance throughout a long service life. Tracks more narrow than 25” are available for applicable machines. Supplied by: bars put more rubber on the ground. Available in different track widths, ply ratings, lug spacings, lug heights, internal guide lug lengths and numbers. Suppliers of over 4 million tracks since 1948. Exclusive Western Australian Agent Harvestaire Pty Ltd Prices exclude GST 2 9344 7433 Replacement Tracks TREADBARS GUIDE LUGS Width Track Ordering OEM Part Qty Height Tip Pitch Qty (inch) SeriesNo.Number (inch) Width(inch) (inch) Length Ply (inch) Price CAT CHALLENGER 35, 45, 55 (317” TRACKS) 25 3500 CRT-630-2501 1R1113 722.51.58.8 365.5 3$8500 30 3500 CRT-630-3009 1R1291/1R1114 722.51.58.8 365.5 4$9925 CRT-3814-7053 Mid Roller suit 25” & 30” Tracks $350 CAT CHALLENGER 65, 70, 75, 85, 95 (336” TRACKS) 25 3500 CRT-632-2529 1R1097 742.51.59.9 366.2 3$9270 25 5500 CRT-652-2506 1R1361 96 2.5 1.57 4854 $12 250 30 3500 CRT-632-3003 1R1075 682.51.59.9 366.2 3 $11 990 30 3500 CRT-632-3048 1R1075 742.51.59.9 366.2 3 $11 445 30 5500 CRT-652-3049 1R1134/1R1232/1R1187 742.51.59.9 48 5 4 $12 590 30 5500 CRT-652-3004 1R1335/1R1355 96 2.5 1.57 4854 $14 500 CRT-4W-0240 Mid roller - standard 355mm x 204mm $360 CRT-1R1184 Wheel-Drive - right hand $2300 CRT-1R1185 Wheel-Drive - left hand $2300 AGCO CHALLENGER MT700 (348” TRACKS) 25 5500 CRT-655-2522 1R1320 923.02.57.8 465.5 4 $14 000 AGCO CHALLENGER MT800 (392” TRACKS) 30 3500 CRT-636-3029 1003.01.68.0 524.7 4 $15 800 30 5500 CRT-656-3031 1R1325 1003.02.58.0 525.5 4 $15 240 36 3500 CRT-636-3621 1R1267 1002.71.68.0 524.7 4 $16 665 36 5500 CRT-656-3622 1R1360 1003.02.58.0 525.5 4 $19 700 case-ih stx and 9300 quadtrac (252" TRACKS) Main body of track - much thicker and stronger than originals 30 3500 30 CRT-634-3023 STX375, 425, 450, 500 3500 CRT-634-3026 9300 Series STX100 3.0 2.5 6.0 52 3.5 4 $9000 1003.02.56.0 523.5 4$8700 JOHN DEERE 8000 T SERIES (324” TRACKS) 25 3500 CRT-631-2509 R241745/R220829 962.51.56.8 484.1 4$9425 25 5500 CRT-651-2504 R241750 962.5 2.256.8 484.7 4 $12 125 30 3500 CRT-631-3012 R241747/R220830 962.51.56.8 484.1 4 $12 950 30 5500 CRT-651-3002 R241751 962.5 2.256.8 484.7 4 $14 100 CRT-3813-8143 Mid Roller suit 24” & 30” Tracks $360 JOHN DEERE 9000 T SERIES (378” TRACKS) 30 3500 CRT-633-3019 922.72.7 54 5.25 3 $12 350 30 5500 CRT-653-3010R241748 922.75 2.7 8 545.25 4$15 100 36 3500 CRT-633-3606 922.75 2.7 8 545.25 3$14 100 36 5500 CRT-653-3601R241749 922.75 2.7 8 545.25 4$19 400 CRT-3813-9144 Mid Roller suit 30” Tracks $325 prices valid to DECEMber 31st 2011 - please ring for confirmation after that 9344 7433 Prices exclude GST 3 Combine Seeder Air Kit Convert any Combine Seeder to Mimimum or Zero Till with a simple Air Kit Now weitshs S tainl l S tee i Ve n t u r This will enable you to get seed and fertiliser to any Tynes so you can spread the Tynes out for excellent Trash Flow Many Farmers prefer the metering accuracy and reliability of combine seeders but have incurred problems when attempting to change to minimum or zero till farming practices. The tyne spacing required for trash flow requires seed and fertiliser to be distributed to tynes on all rows and this is not normally possible with gravity feed. Harvestaire have developed a simple air distribution kit for combine seeders to move seed and fertilizer to any of the tynes on the machine. In many cases fitment of our kit has enabled farmers to upgrade their farming practises without expensive equipment purchases. These kits have been supplied to farmers over the past 17 years and owners are very satisfied with this simple but effective equipment. The system consists of a 6" hydraulically driven fan fitted on a mounting stand. This then pumps air into a manifold which extends the full width of the combine. Outlets that line up with the metering intervals are located on the manifold. These are connected by short pieces of hose to venturi - one and sometimes two per metering point. The seed or fertiliser or both are dropped into the venturi and the air stream blows it to the tyne via standard Air Seeder hose. Depending on tyne numbers and spacings sometimes not all drops are used. Some tynes can still be gravity fed. We usually build the manifold with all outlets to match the number of drops and cap off outlets not being used. This enables alteration to future tyne patterns without having to alter the manifold. The price for a typical system is $5450. This allows for 28 Venturi. If some tynes are being gravity fed less venturi are needed and the price will reduce, unless seed and fertiliser separately to each tyne in which case 2 venturi per drop are needed and the price may increase. The venturi are approximately 400mm long and are now made from stainless steel. A typical kit includes: • 6" Blower fitted with a hydra motor, 2 short hydraulic hoses and a check valve all fitted on a mounting stand. • Air distribution manifold. • 6" Flex hose to join the manifold and blower. • 28 Venturi and 4 x 38mm hose clamps for each. Venturi are priced at $44 each so if some tynes are going to be gravity fed the price can be reduced and if seed and fertiliser are to be sent to each tyne separately extra venturi will be required. If tynes behind the seed and fertiliser box are to be supplied with seed and fertiliser, a simple attachment to the venturi will be required to reverse the air 180o. These are priced at $10 each and consist of a short piece of 38mm flex hose a bracket and 1 extra hose clamp. NB: The price of the overall system does not include the hose that runs form the venturi to the tynes or the hydraulic hoses from the tractor back to the short hoses on the hydamotor. Prices for other machines such as 33 or 27 drop Shearer will be different but the above will act as a guide. WARM AIR OPTION: We also have available a radiator type unit that attaches to the inlet side of the blower and both: • Cools the Hydraulic Oil • Warms the air flowing through the system. This will dry out any moisture and avoid blockages. Approximate price is $1100 Inc. Mount Kit & Hoses. Prices exclude GST 4 9344 7433 Electric Linear Actuators Uses: • Seeding Time - Remote control of filling augers • Grain Chute doors • Sheep Feeders • Silo Outlets • Clutch Operation Grain Bins Electrak 1 Electrak 2 Electrak 10 Electrak 100 E050 E150 Input 12volt 12volt12volt 24volt12volt12volt Voltage 24volt 24volt 24volt24volt * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. Load capacity (lbs.) 25 on 12volt 250 on 12volt 75 on 24volt Stroke length 1, 2, 4, 6 (inches) 500 on 12volt 1000 on 24volt 1000 on 24volt 4, 8, 12, 18, 24 4, 8, 12, 18, 24 4, 8, 12, 18, 24 50 on 12volt 112 on 24volt 225 on 12volt 450 on 24volt 4, 6, 8 4, 8, 10, 12 Type of Acme Acme Ball bearing Ball bearing Acme Acme lead screw screw screwscrew screwscrewscrew Duty cycle, full load Load limiting clutch Limit Switches Feedback Motor overload protection Price 9344 7433 25% 25%25% 25%25%25% No YesYes Yes Yes No Fixed No No AdjustableFixedAdjustable No No No PotentiometerNo No Yes YesYes YesYesYes $540 $700 P.O.A. Prices exclude GST P.O.A. $390 $680 5 Hay Improved LoaderConcaves Tynes for Axial Flow and Rotaries ORDERING No. Description/APPLICATION TP77017 TP77035 TP77018 TP77019 TP1841 TP84102 price Conus 2 Taper 980mm long Conus 2 Taper 1100mm long Conus 2 Taper 1250mm long Conus 2 Taper 1400mm long Conus 2 weld in mounting sleeve Conus 2 weld in mounting sleeve keyed for curved Grab Tyne $120 $122 $125 $140 $24 $23 PTO Adaptors Ordering No.Price Original P/No. Description/Application TP 15866 $70 - H/DUTY CLAMP TYPE ADAPTOR 1 3/8" 21 Spline Female 1 3/8" 6 Spline Male. 6.5" O/A TP 15904 $85 - H/DUTY CLAMP TYPE ADAPTOR 1 3/8" 6 Spline Female 1 3/8" 21 Spline Male. 6.5" O/A TP 16251 $125 - H/DUTY CLAMP TYPE ADAPTOR 1 3/4" 20 Spline Female 1 3/8" 6 Spline Male. 7.875" O/A TP 16250 $125 - H/DUTY CLAMP TYPE ADAPTOR 1 3/4" 20 Spline Female 1 3/8" 21 Spline Male. 7.875" O/A Many other Adapters available upon request. * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. PTO ADAPTORS - CLAMP TYPE FOR LONGER LIFE Prices exclude GST 6 9344 7433 Allis Chalmers Replacement Parts Ordering No. Price Original P/No. Description/Application Front Axle & Steering Parts General Illustration Only Mufflers Duplicate Originals in Dimensions and Shape TPAC-188$46070267780 STUB AXLE R/H 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8030, 8050, 8070 TPAC-189$46070267779 STUB AXLE L/H 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8030, 8050, 8070 TPAC-227$13070269353 TIE ROD SLOTTED 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070 TPAC-228$65 70265527 TIE ROD THREADED 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070 TPAC-498$30070265167 70265166 70264170 FRONT WHEEL HUB, 8 STUD 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 8010, 8030, 8050, 8070 Mufflers TPAC-624$22070261975 MUFFLER (Vertical) 7000 above s/n 8553 7010, 7020, 7030, 7040, 7045, 7050, 7060 TPAC-625$25070269031 MUFFLER (Vertical) 7080, 7580 Spark Arrested Mufflers available on request Length48" ShellOval Inlet3"ID Outlet3"OD Length49" ShellOval Inlet4"ID Outlet41/8"OD * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. Engine Parts 9344 7433 TPAC-960$21574036828 EXHAUST MANIFOLD 74036503 CENTRE SECTION 74027505 7030, 7040, 7045, 7050, 7060, 7080,7580, 8030, 8050, 8070 TPAC-1445$35574036573WATERPUMP - REMANUFACTURED **$100 CORE EXCHANGE** 7030, 7040, 7045, 7050, 7060, 7080, 8030, 8050, 8070, 4W220 TPAC-1643$27574062321WATERPUMP 7010, 7020, 8010 Cab Glass & Fan Motor TPAC-962$290 70577185 REAR CAB GLASS 7000 Series TP-541$14070578041 FAN MOTOR 3 Speed 3/8" double shaft 12 volt Prices exclude GST 7 Case Replacement Parts Ordering No. Price Original P/No. Description/Application TPCA-1313$475 A57441 A24638 STUB AXLE 730, 830, 930, 1030 TPCA-200$400 A176152 A62915 A62316 STUB AXLE 770, 870, 970, 1070, 1175 TPCA-191$445 A167024 A145941 STUB AXLE 1896, Early 2090 & 2290, 2094, 2294, 2096 (2" Dia King Pin) TPCA-192$408 A161274 A147118 STUB AXLE Late 2090 & 2290, 2294, 2390, 2394, 2590, 2594 (2" Dia King Pin) WBK-CA-200$65- WHEEL BEARING & SEAL KIT To suit TPCA-200 & TPCA-191 TPCA-295$55 A44762 TIE ROD INNER 770, 870, 970, 1070 A143028 TPCA-296$80 TIE ROD OUTER 770, 870, 970, 1070 A43376 TPCA-297$70 TIE ROD INNER 1090, 1170, 1270, 1370, 1570 A160200 TPCA-299$52 A162214 TIE ROD L/H 1896, 2090, 2290, late 2390, 2590, 2094, 2294, 2394, 2594 A160197 TPCA-300$125 TIE ROD R/H 2090, 2290, 2390, 2590, 2094, 2294, 2394, 2594 TPCA-1240$150 L59042 POWER STEERING CYLINDER END 1896, 2090, 2094, 2096, 2290, 2294, 2390, 2394, 2590, 2594 Radiators TPCA-940$1395 A184364 A184365 A147139 A147140 RADIATOR 2390, 2394, 2590, 2594, 3294 3394, 3594 A66330 TPCA-6330$1200 RADIATOR 970, 1070, 1170, 1175, 1270, 1370 * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. Front Axle & Steering Parts Prices exclude GST 8 9344 7433 8 Case Replacement Parts Ordering No. Price Original P/No. Description/Application Mufflers General Illustration Only Mufflers Duplicate Originals in Dimensions and Shape TPCA-626$110 A59764 MUFFLER (Vert.) 770, 870 Length44" Shell 6" Round Inlet23/4"ID Outlet23/4"OD TPCA-627$155 A59765 MUFFLER (Vert.) 970, 1070 Length44" ShellOval Inlet23/4"ID Outlet23/4"OD TPCA-628$295 A66780 Length27" MUFFLER (Vert.) ShellOval With base plate aspirator Inlet31/2"ID 1270, 1370 Outlet41/8"OD TPCA-629$380 A147065 MUFFLER (Vert.) With 1" side aspirator 2090, 2094, 2290, 2294 Length31" ShellOval Inlet31/2"ID Outlet41/8"OD A147100 TPCA-630$450 Spark Arrested Mufflers available on request MUFFLER (Vert.) With 1" aspirator 2390, 2394, 2590, 2594 Length31" ShellOval Inlet4"ID Outlet41/8"OD * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. Engine Parts - Water Pumps 9344 7433 TPCA-1441 $295A152179 WATER PUMP - REMANUFACTURED ** $50 CORE EXCHANGE** 870, 970, 1070 TPCA-1442 $275 A152154 WATER PUMP - REMANUFACTURED ** $50 CORE EXCHANGE** 1270, 1370, 2470, 41/2” Impellor TPCA-1524 $430A157145 WATER PUMP - REMANUFACTURED ** $50 CORE EXCHANGE** Large Plastic Impellor, 41/2” dia. Cast A58642 2090, 2094, 2290, 2294, 2390, 2394, 2590, 2594 3294, 3594, 4490, 4494 Straight Shaft Models only TPCA-1443 $175 A77703 J802358 WATER PUMP - 5.9 LITRE 5120, 5130, 5140, 5220, 5230, 5240, 5250 MX90, MX100, MX120, MX135, MX150, MX170 TPCA-1444$295 A77704 J802975 WATER PUMP - 8.3 LITRE 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 9110, 9130, 9210, 9230, 9240 TPCA-6536$750 A46536 WATER PUMP 4890 - Scania to Serial No. 3027228 WATER PUMPS AVAILABLE - SUIT 301, 336, A51 AND 504 ENGINES CALL FOR A PRICE Prices exclude GST 9 Case Replacement Parts Ordering No. Price Original P/No. Description/Application Engine Parts - Water Pumps TPCA-0759 $210 K200759 WATER PUMP 1590,1594, 1690. 1694 TPCA-7146 $425 A157146 WATER PUMP 2670, 4690, 4694 TPCA-2742 $590 A152742 CYLINDER HEAD WATER MANIFOLD 970, 1070, 1270, 1370, 2470, 4494, 4690, 4694 Exhaust Manifolds TPCA-210 $300 A58906 A76322 MANIFOLD CENTRE PIECE 1270, 1370, 1570, 2290, 2294, 2390, 2394 2470, 2670, 2590, 2594, 3294, 3394, 3594, 4490, 4494, 4690, 4694 $250 A61265 TPCA-213 EXHAUST ELBOW 1270, 1370 Final Drive & Brake Parts TPCA-212 $1100 A67082 CROWN WHEEL & PINION late 1270, 1370 (from trans S/No. 2476547) TPCA-367 $460 A66879 A63194 A153938 A168168 A14820 SUNSHAFT 33/8" Wide Gear 13 teeth 11.625" long 1270, 1370, 2390, 2394 (will fit early 3" wide gear) 2594 after S/No. 16260432 TPCA-365 $38 1975466C1 A44712 BRAKE DISC (7” dia) 24 spline 730, 830, 930, 1030, early 870 & 970 BRAKE DISC (8” dia) 24 spline Late 870 & 970, 1070 PTO Parts TPCA-603 $275 A58214 PTO SHAFT 540/1000rpm DUAL SPEED 870, 970, 1070, 1090, 1170 TPCA-214 $225 A140655 PTO SHAFT 540/1000rpm DUAL SPEED 1896, 2090, 2290, 2094, 2096, 2294 Cab Parts TP-541 $140 FAN MOTOR 3 Speed. 3/8” double shaft. 12 volt TP-543 $160F89750 FAN MOTOR Reversible Speed. 5/16” double shaft. 12 volt TPCA-1685 $230F96901 F89388 FAN MOTOR 90, 94, 96 Series CAB Blower * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. TPCA-366 $55 1975469C1 Prices exclude GST 10 9344 7433 10 Improved Chamberlain Concaves Replacement for Parts Axial Flow and Rotaries Ordering No. Price Original P/No. Description/Application Front Axle & Steering Parts TPCH-737$14537289 50161 KINGPIN ONLY 236, 306, 354, C670, C6100 TPCH-737B$11 37080 Bush - suit King Pin - TPCH737 TPCH-737TB$1837092 THRUST BEARING - suit King Pin - TPCH737 * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. TPCH-737N$12 3729111/4" UNF Kingpin Nut 9344 7433 TPCH-737WKTOP$12 26H101 Woodruff Key suit Top Of Kingpin TPCH-737WKBOT$20 20476 Woodruff Key suit Bottom Of Kingpin TPCH-1202$795 64400 STUB AXLE 38mm Kingpin 4080, 4280, 4480 incl B Series, Some '90' Series TPCH-1203$79569577 STUB AXLE 41mm Kingpin 4080, 4280, 4480 incl B Series, Some '90' Series TPCH-9579$62569579 STUB AXLE 280mm Long 3380 TPCH-1665$59537290 STUB AXLE No Kingpin 3380 WBK-CH-306$160- WHEEL BEARING AND SEAL KIT CHAM 306-C6100, 80-90 SERIES TPCH-785$95 37094 63552 70728 TPCH-786$95 70727 22442 63551 1” L/H THREAD TIE ROD AND DRAG LINK END (Female Thread) 236, 306, 354, C670, C6100 TPCH-996$95 56858 1” L/H THREAD TIE ROD END (Male Thread) 3380, 4080, 4280, 4480, 4090, 4290, 4490, 4690 TPCH-1330$95 56782 1” R/H THREAD TIE ROD END (Male Thread) 3380, 4080, 4280, 4480, 4090, 4290, 4490, 4690 TPJD-374$62 AR28115 7/8” R/H THREAD TIE ROD END (Male Thread) 9G TPJD-751$65 AR27351 7/8” L/H THREAD TIE ROD END (Male Thread) 9G TPCH-1284$340 58873 STEERING SHAFT 3380, 4080, 4280, 4480 TP-537$170 - 10 x 16 x 6 STUD FRONT RIM 11.00x16 TYRES - 5 1/2”Outside, 5” Inside Dish - TP-524$170 8 x 16 x 6 STUD FRONT RIM 9.00-11.00x16 TYRES - 4”Outside, 5” Inside Dish Prices exclude GST 1” R/H THREAD TIE ROD AND DRAG LINK END (Female Thread) 236, 306, 354, C670, C6100 11 Chamberlain Replacement Parts Ordering No.Price Original P/No. Description/Application Mufflers TPJD-632$230 AL24553 MUFFLER 4090 TPCH-9388$395 MUFFLER 4080, 4280 TPCH-306$525 MUFFLER 96, 306, C670, C6100 TPJD-1301$300AR61073 MUFFLER 4480, 4290, 4490, 4690 Note: These Mufflers are not Spark Arrester Type. TPJD-1437 $345T20249 EXHAUST MANIFOLD 3380 TPJD-465 $590R71529 CAMSHAFT 4490, 4690 TPJD-1662$950RE53884 CAMSHAFT - Inc. Lifters 6/329, 6/359, 6059, 6068 ENGINES TPJD-743$23R52773 CAMSHAFT LIFTER 4490, 4690 (USED WITH TPJD-465) TPJD-1009$1395RE502190 CRANKSHAFT 6/329 & 6/359 RE 502/90, 4080, 4280, 4480, 4090, 4290 TPJD-1070$2950RE53422 CRANKSHAFT 4490, 4690 TPCH-1332$330 55483 RETAINER - FLYWHEEL HUB 3380, 4080, 4280, 4480 inc B Series TPCH-1333$33037166 TPCH-1564$295 TPJD-1663$74 TPCH-1714$67 TPCH-9564$110 TPCH-9002$121 TPCH-1712$740 43286 26828 62890 70196 TPCH-3838$4543287, 40532 38450 TPJD-1328$620 RE12820 TPCH-1664$165 59838, 65540, 26298 RETAINER - FLYWHEEL HUB 236, 306, 354, C670, C6100 FLYWHEEL HUB 4090, 4290, 4490, 4690 LIFT PUMP 3380, 4080, 4280, 4480, 4090, 4290 LIFT PUMP 306, 354, CM6, C670, C6100 PENCIL INJECTION NON-TURBO ENGINES 3380, 4080, 4280, 4090 PENCIL INJECTION TURBO ENGINES 4480, 4290 STARTER MOTOR REDUCTION DRIVE CM6, 306, C670, C6100, 3380, 4080, 4280, 4480, 4290, 4490, 4690 STARTER KEY SWITCH 9G, C670, 6100, 236, CM6 HARMONIC BALANCER 329/359/359T Engines WATER PUMP (NO PULLEY) 306, 354, C670, C6100 * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. Engine Parts Prices exclude GST 12 9344 7433 Chamberlain Replacement Parts Ordering No. Price Original P/No. Description/Application Engine Parts TPCH-5901 $265 25901 TPCH-5464 $105 AT32489 $140 RE11346 TPCH-5465 $155 RE11348 TPCH-5467 TPCH-1099 $135 RE10967 WATER PUMP 9G - Suit L4 or 270D Perkins Not Meadows WATER PUMP REPAIR KIT 3380 WATER PUMP REPAIR KIT 4080 WATER PUMP REPAIR KIT 4280, 4480, 4090, 4290 WATER PUMP REPAIR KIT 4490, 4690 TPCH-7497 $1290 37497 RADIATOR 9G, 306, 354, C670, C6100 Fanbelts, Radiator Caps and Thermostats available. * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. Clutch Parts 9344 7433 TPCH-904 $540 36306 PRESSURE PLATE (14") 3380, 4080, 4280, 4480 up to No 2844, 236, 306, 354, C670, C6100, late model 9G TPCH-928 $290 69069 CLUTCH PLATE -Button Type (14") 3380, 4080, 4280, 4480 inc B Series 9G, 236, 306, 354, C670, C6100 (in heavy duty applications) TPCH-1338 $185 55858 31558 CLUTCH PLATE - Organic Lining (14") 9G, 236, 306, 354, C670, C6100 3380, 4080, 4280, 4480 inc B Series TPCH-1201 $2020189 PILOT BEARING 9G, CM6 236, 306, 354, C670, C6100 3380, 4080, 4280, 4480 4090, 4290, 4490, 4690 TPCH-1200 $6820205 THRUST RELEASE BEARING 9G, CM6 236, 306, 354, C670, C6100 3380, 4080, 4280, 4480 TPCH-770 $290 CLUTCH PLATE -Spicer (14") Ceramic 4090, 4290, 4490, 4690, JD/CHAM TPCH-770-0 $290 70770 70770 CLUTCH PLATE - (14”) Organic 4090, 4290, 4490, 4690, JD/CHAM $675 70832 TPCH-832 PRESSURE PLATE ASSY (14”) 4090, 4290, 4490, 4690, JD/CHAM including thrust bearing TPCH-339 $305 - CLUTCH PLATE -Spicer (151/2”) Ceramic 4490-4690 TPCH-139 $940 - PRESSURE PLATE ASSY -Spicer (151/2”) 4490-4690 including thrust bearing TPCH-6212 $52- Prices exclude GST THRUST BEARING 4090, 4290, 4490, 4690 13 Chamberlain Replacement Parts Ordering No.Price Original P/No. Description/Application Transmission & PTO Parts TPCH-263$510 20122 1st & 2nd GEAR 236, 306, 354, C670, C6100 TPCH-264$560 37569 3rd GEAR 236, 306, 354, C670, C6100 TPCH-265$650 37570 2nd & 3rd SLIDING GEAR 236, 306, 354, C670, C6100 TPCH-266$575 23351 44869 1st & Reverse SLIDING GEAR 236, 306, 354, C670, C6100 TPCH-1335$34037198 TPCH-1336$64054608 PTO INPUT SHAFT 236, 306, 354, C670, C6100 TPCH-1282$82537575 MAIN SHAFT - Less gears 236, 306, 354, C670, C6100 TPCH-1290$92570760 54610 MAIN SHAFT - HOLLOW 80 Series TPCH-908$825 39335 TPCH-909 $635 53130 BULL PINION 354, C6100 TPCH-910$54053131 SUNSHAFT R/H 4280, 4480 (Long) include B Series TPCH-1274 $955951 PTO & DRIVE DRIVEN DISC STEEL 3380, 4080, 4280, 4480, 4090, 4290, 4490, 4690 (6 REQUIRED) TPCH-1275 $2455952 PTO & DRIVE DRIVING DISC FRICTION 3380, 4080, 4280, 4480, 4090, 4290, 4490, 4690 (6 REQUIRED) TPCH-1276 $2238389 39781 TPCH-1277 $838390 32837 PTO INNER DISC FRICTION 236, 306, 354, C670, C6100 51/4 O.D. 9G with 32838 wet clutch, COUNTRYMAN 6 (6 REQUIRED) TPCH-8439$2438439 Brake Disc - PTO TPCH-1283$56054359 540 rpm PTO SHAFT 4080, 4280, 4480, 4090, 4290 PTO INPUT SHAFT 80 Series PTO DISC OUTER STEEL 236, 306, 354, C670, C6100 51/4 O.D. 9G with wet clutch, COUNTRYMAN 6 (7 required) * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. SUNSHAFT L/H 4280, 4480 (Short) include B Series Prices exclude GST 14 9344 7433 Chamberlain Replacement Parts Ordering No.Price Original P/No. Description/Application * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. Cab Parts 9344 7433 TP-542$140AR62497 FAN MOTOR 5/16" double shaft. 12 volt 3380, 4080, 4280, 4480 TPCH-1191$32561554 REAR WINDOW 80 Series TPCH-7130$4257130 REAR WINDOW 90 Series TPCH-1192$200 61481 SIDE WINDOW 80 Series TPCH-1195$18per metre TPCH-1821$4056988 WINDOW SEAL DOOR LATCH 3380, 4080, 4280, 4480 Engine Rebuild Components Call us for a quote. All makes and models of Tractor or Truck. Prices exclude GST 15 Ford Replacement Parts Ordering No.Price Original P/No. Description/Application Front Axle & Steering Components TPFD-229$160 C5NN-3106-J STUB AXLE LEFT HAND 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610 TPFD-230$160 C5NN-3105-M STUB AXLE RIGHT HAND 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610 TPFD-917$310 D5NN-3106-F 83908153 STUB AXLE LEFT HAND (low clearance) 5700, 6700, 6710, 7700, 7710, 7810, 7910, 8210 TPFD-3106 $555D5NN-3106-C STUB AXLE LEFT HAND 8530 to 8830, 8700, 9700, TW5 to TW35 TPFD-3105 $555D5NN-3105-C STUB AXLE RIGHT HAND 8530 to 8830, 8700, 9700, TW5 to TW35 WBK-FD-229$70- WHEEL BEARING & SEAL KIT Suits TPFD-229, 230, 916 & 917 WN-460-36$125- WHEEL BEARING & SEAL KIT 7010, 8000, 8010, 8200, 8240, 8340, 8600, 8700, 9000, 9200, 9600, 9700 TPFD-3131B$475 D5NN3131B STEERING ARM LEFT HAND 5700 to 9700, TW10, TW20 - Long wheel base TPFD-3131GA$475D8NN3131GA STEERING ARM LEFT HAND 8530 to 8830, TW5 to TW35 - Long wheel base TPFD-5194$175 EONN3304CA DRAG LINK 5000, 5600, 7000, 7600, 5610, 6610, 7610 TPFD-953$100 C9NN-1104-D FRONT HUB - 6 bolt 5000, 5600, 5610, 6600, 6610, 6700, 6710 7000, 7700, 7710, 7810, 7840, 7910, 8210 TPFD-276$50 E3NN-3307-AA TIE ROD SHORT 8000, 8600, 8700, 9000, 9600, 9700 TPFD-277$105 C7NN-3280-D TIE ROD LONG 8000, 8600, 8700, 9000, 9600, 9700 TPFD-1314$50C7NN3281A C5NN3281C TIE ROD END LEFT HAND OUTER 5000, 7000 Manual & Power Steering 5600, 7600 with Power Steering only TPFD-1314R$50 C7NN3281A C5NN3281C TIE ROD END RIGHT HAND OUTER 5000, 7000 Manual & Power Steering 5600, 7600 with Power Steering only * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. TPFD-916$310D5NN-3105-FSTUB AXLE RIGHT HAND (low clearance) 83908152 5700, 6700, 6710, 7700, 7710, 7810, 7910, 8210 Prices exclude GST 16 9344 7433 Ford Replacement Parts Original P/No. OrderingNo.Price No. Price Ordering Original P/No. Description/Application Description/Application Front Axle & Steering Components TPFD-1489$110 83936589 D8NN3B539AB TIE ROD END POWER STEERING RAM (FEMALE) 5700, 6700, 6710, 7700, 7710, 7910, 8210, 8700, 9700 TW5, TW10, TW15, TW20, TW25, TW30, TW35 TPFD-1490$120 83936586 D8NN3A302AA 83913086 TIE ROD END POWER STEERING RAM (MALE) 5700, 6700, 6710, 7700, 7710, 7910, 8210, 8700, 9700 TW5, TW10, TW15, TW20, TW25, TW30, TW35 TPFD-1491$105 83929292 E1NN3280AA TIE ROD END - OUTER 7700, 8700, 9700 TW10, TW20, TW30 TPFD-1492$9583929289 EINN3289AA TIE ROD END - OUTER THREADED 7700, 8700, 9700 TW10, TW20, TW30 Radiators TPFD-952$400 C7NN-8005-E RADIATOR without cooler pipes 5000, 5600, 6600, 7600, 5610, 6610, 6710 TPFD-9067$545 RADIATOR with cooler pipes 5000, 5600, 6600, 7600, 5610, 6610, 6710 TPFD-1261$49081823983 C7NN8005R RADIATOR without cooler pipes 3000, 3600, 4000, 4600 TPFD-8005 $1390 E3NN8005BD15M RADIATOR 8530, 8630, TW5, TW15 Mufflers * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. General Illustration Only Mufflers Duplicate Originals in Dimensions and Shape 9344 7433 TPFD-634$70 D8NN-9350-AA D8NN-9350-AB MUFFLER (Vertical) 2000, 3000, 4000, 5000 Length29" Shell51/2" Inlet17/8"ID Outlet2"OD TPFD-635$115 D5NN-5230-F D5NN-5230-V MUFFLER 7000, 7600, 7700, 7710 Length38" ShellOval Inlet23/8"ID Outlet 21/2"OD TPFD-636$190 D5NN-5230-S MUFFLER 8700, TW10 Length44" ShellOval Inlet23/4"ID Outlet3"OD TPFD-992$275 D6NN5230AJ Spark Arrested Mufflers available on request MUFFLER 9600, 9700, TW10 TW20, TW30 Prices exclude GST Length441/2" ShellOval Inlet31/2"ID Outlet 31/2"OD 17 Ford Replacement Parts Ordering No. Price Original P/No. Description/Application Engine Parts TPFD-779 $70 D8NN9350AA FUEL LIFT PUMP (ON INJ PUMP) All models using CAV & Simm inline inj. pump C7NN-5230-Z 8399 1467 5000, 5600, 5610, 6600, 6610, 6700, 7600, 7700, 7710, 7910, 8210, all TW Models, 9600, 9700, 8401, 8630, 8730, 8830 $210 D5NN-9431-A REAR EXHAUST MANIFOLD TPFD-951 D8NN-9431-A 8700, 9700,TW5 to TW30 8210, 7910, 8530 to 8830 TPFD-942 $400 D8NN-9430-AA FRONT EXHAUST MANIFOLD D5NN-9430-A 8700, 9700,TW10, 20, 30 D8NN-9430-AB 8210, 7910 $190 C5NE-9430-D MANIFOLD TPFD-969 8180 6040 5000 $360 D8NN-11000-AA STARTER MOTOR - TYPE M50 TPFD-741 2000 to 9700, TW10 TPFD-1258 $95 EAPN8A513F WATER PUMP Single Pulley 3/8” mount bolts 83926002 2000 to 7710 $170 WATER PUMP TPFD-1325 7910, 9700 WATER PUMP Double Pulley 3/8” mount bolts TPFD-6776 $145 EAPN8A513E 3600 to 7700, 3210 to 7710 TPFD-1259 $105 EIADKN8501B WATER PUMP 1711728 Fordson Major, Power Major, Super Major TPFD-3921 $169 EAPN8A513F WATER PUMP Single Pulley TW5, 10, 15, 20, 25, 30, 35 TPFD-3835 $254 EJPN8A513BA WATER PUMP Double Pulley TW5, 10, 15, 20, 25, 30, 35 TPFD-0682 $1100 E2NN6K682BC TURBO CHARGER W E N 8630, 8730, TW15, TW20, TW25 TPFD-0682FB N E W $1150 D8NN6K682FB TURBO CHARGER 8830, 9700, TW30, TW35 Early model Ford e clutches availabl ng ici pr - call for ’s, Dexta, Major, 2000 ’s, 00 50 ’s, 00 40 ’s, 3000 ’s 6000’s, 7000 TPFD-472-1 $390 DINN-7550-C TPFD-472-2 $295 D8NN-7563-BA TPFD-769 $50 D8NN-7580-BB $38 C5NN-N779-B TPFD-770 $70 E9NN2A097BA TPFD-097 TPFD-5565 $1220 5189875 $290 5189825 TPFD-5566 TPFD -5568 $152 5167937 TPFD-8135 $620 5196770 5186550 TPFD-7497 $919 85196809 TPFD-7499 $270 85176450 CLUTCH PLATE 13" BUTTON TYPE 8000, 8600, 8700, 9000, 9700, TW5, TW10, 8401 13" PRESSURE PLATE 8000, 8600, 8700, 9000, 9600, 9700, TW5, TW10, 8401 THROWOUT BEARING 5000 to 8700, 9000, 9600, TW5 to TW35 PILOT BEARING 5000 to 8700, TW5 to TW35 BRAKE DISK 5100 to 7910 - 8.8” Outer Diameter PRESSURE PLATE (inc Ceramic Clutch Plate) - 12” Dual Ford NHL65, TL65, TL70, 4635, L75, L85, TL80, TL90 12” CLUTCH PLATE - Ceramic - as per previous item 12” PTO CLUTCH PLATE - Organic - as per previous item PRESSURE PLATE inc Power Shuttle Damper Ford NH TN55 to TN95 - Power Shuttle Models PRESSURE PLATE (inc Ceramic Clutch Plate - 11” Dual Ford NH TN55 to TN90 - not Power Shuttle Models 11” PTO CLUTCH PLATE - Ceramic - as per previous 2 items * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. Clutch & Brake Parts Prices exclude GST 18 9344 7433 Ford Replacement Parts Ordering No.Price Original P/No. Description/Application PTO Parts TPFD-275$325 D8NN-N778-AA 8391 3005 TPFD-275-S$325EONNN777AB 83936827 TPFD-754$390 D8NN-7A684-BA TPFD-755$390 D8NN-7A684-AB TPFD-470$285 D2NN-B728-A TPFD-471$220 D2NN-B728-B TPFD-1339$27083959984 E6NNB728AA TPFD-1340$26083957546 D8NNB728BC PTO HUB ONLY (Late Model) 22 Splines Some 8000, 8600, 8700, 9000, 9600, 9700 All 8530-8830, TW5 to TW35 PTO HUB ONLY - 20 internal (Early Model) splines - as per previous item PTO INPUT SHAFT 22 spline - 37.5" Long - suit TPFD 275 Hub 8700, 9600, 9700, TW0, TW20, TW30 PTO INPUT SHAFT 22 spline -37.5” Long TW5, 10, 15, 20, 25, 30, 35 Also suits TPFD-275 hub PTO SHAFT - 540rpm (2 speed PTO) 5100, 5200, 5600, 5700, 6600, 6700, 7000 7700, 8000, 8600, 8700, 9000, 9600, 9700 PTO SHAFT - 1000rpm (2 speed PTO 6700, 7700, 7600, 7700 PTO SHAFT - 540rpm TW10, TW20, 6700, 7100, 7600, 7700 PTO SHAFT - 1000rpm TW5, TW10, TW15, TW20, TW25 TW30, TW35 Hydraulic Pumps TPFD-1264$650D8NN600G 81823983 TPFD-468$825 D8NN-600-FA 83913537 TPFD-469$695 E2NN-600-BA 83945584 HYDRAULIC PUMP 5000, 7000 without dual power HYDRAULIC PUMP 16gpm TW5, 10, 15, 20, 25 HYDRAULIC PUMP 20gpm TW30, 35 * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. Cab Parts 9344 7433 TP-541$140 FAN MOTO 3 SPEED 3/8" Double Shaft - 12 volt TW10 TP-542$140 VERS 9115622 FAN MOTOR REVERSIBLE 1 SPEED 5/16" Double Shaft - 12 volt TP-543$160 FD D5NN18546A FAN MOTOR NH130185 REVERSIBLE 3 SPEED 5/16" Double Shaft - 12 volt TPFD-8332 $39582848332 GLASS - Front TW5 to TW30, 2610 to 8700 TPFD-9859 $18083909859 GLASS - Rear Lower TW10 to TW25, 2600 to 8200 TPFD-4420 $185D6NN94420N11A GLASS - Rear Lower - Q Cab TW5 to TW30, 5110 to 7710 TPFD-4570 $45083904570 GLASS - Rear Upper TW5 to TW30, 5510 to 7710 TPFD-2006 $320E4NN9442006AA GLASS - Rear Upper - Hinged TW5 to TW35, 4610 to 8830 Prices exclude GST 19 International Case-IH Replacement Parts Ordering No.Price Original P/No. Description/Application Front Axle & Steering Parts TPIHC-194$300 405840R11 STUB AXLE 121/4" STD DUTY 454, 574, 584, 585, 595, 674 TPIHC-195$300 527292R92 STUB AXLE 151/4" STD DUTY 574, 674, 584, 585, 595 TPIHC-201$325 71785C92 STUB AXLE (HEAVY DUTY) Heavy Duty Bottom Forging 756, 856, 1256, 1456, 686, 696, 766, 866, 966, 976, 1066, 1466, 1468, 1566, 1568, 786, 886, 986, 1086, 1486, 1586, Hydro 70, 86, 100, 186 3088, 3288, 3488, 3688, 5088, 5288, 5488 TPIHC-1341$15 48703D WEAR RING Fits TPIHC-1242 Hub TPIHC-219$10427546 TPIHC-1244$23 185106C TPIHC-1243$22 358958R2 WBK-IHC-194$57- KING PIN NUT ONLY Suit TPIHC-201 Stub Axle WBK-IHC-201$85- WHEEL BEARING & SEAL KIT Suits TPIHC-201 Stub Axle TPIHC-704$643116406R3 TIE ROD OUTER 454, 574, 674, 584, 684, 784, 884, 385, 485, 858, 685, 885 TPIHC-705$443116407R3 TIE ROD INNER 0.875" dia thread THRUST BEARING Suit TPIHC-201 Stub Axle KING PIN BUSH ONLY Suit TPIHC-201 Stub Axle WHEEL BEARING & SEAL KIT Suits TPIHC-194 & TPIHC-195 Stud Axles Same as previous item NEW NEW TPIHC-199 $76 384006R92 TIE ROD INNER 1" thread Same as previous item TPIHC-242$9571820C91 POWER STEERING TIE ROD END Late 66 Series, All 86 Series, 3088, 3288, 3488, 3688 TPIHC-7261$2651277261C1 POWER STEERING CYLINDER END 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250, 8910, 8920, 8930, 8940, 8950 TPIHC-202$100 531248R2 STEERING ARM LEFT HAND 696, 766, 866, 966, 976, 1066, 1466, 1468, 1566, 1568, 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3488, 3688, Hydro 70, 86, 100, 186. Some 5088, 5288, 5488 TPIHC-203$100 531249R2 STEERING ARM RIGHT HAND Same as previous item TPIHC-3864$59563864C93 POWER STEERING CYLINDER 766, 786, 886, 986, 1066, 1086, 1466, 1486, 1566, 1568, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488 * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. TPIHC-197$73359984R93 TIE ROD OUTER 706, 806, 656, 756, 856, 1256, 1456, 686, 696, 766, 866, 966, 976, 1066, 1466, 1468, 1566, 1568, 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3488, 3688, Hydro 70, 100, 86, 186. Some 5088, 5288, 5488 Prices exclude GST 20 9344 7433 International Case-IH Replacement Parts Ordering No.Price Original P/No. Description/Application Front Axle & Steering Parts TPIHC-395$55533808R1 “A” FRAME SOCKET 766, 866, 966, 976, 1066, 1466, 1468, 1566, 1568, 786, 886, 986, 1086, 1486, 1586 TPIHC-313$30379953R1 "A" FRAME CAP Same as previous item TPIHC-396$5465320C3 "A" FRAME BALL STUD Same as previous item. Plus 554, 564, 706, 756, 806, 856, 1256, 686, 1456 TPIHC-1887$30 531242R1 BUSH - FRONT AXLE PIVOT PIN Suit 66 and 86 series TPIHC-1888$65 531239R1 PIN ASSEMBLY - CENTRE ARM PIVOT Suit 66, 86 and 88 series TPIHC-1890$95 531240R1 PIVOT PIN - FRONT AXLE PIVOT TPIHC-1242$2251323559C 391824R11 8 STUD FRONT HUB Bare - no bearings or seals 696, 756, 766, 856, 866, 886, 966, 976, 986, 1066, 1086, 1256, 1466, 1468, 1486, 1566, 1568, 1586 3088, 3288, 3488, 3688, 5088, 5288, 5488 TPIHC-964$175 383906R91 10 x 16 x 8 STUD RIM Suits TPIHC-1242 hub TP-1602$4 WHEEL BOLT 9 /16” X 111/16” Radiators NEW TPIHC-950$94071611C1 RADIATOR 886, 986, 1086, 1486, 1586, 966, 1066, 1466, 1566 TPHC-4594$975A104594C2 RADIATOR 786, 886 TPHC-4753$1060104753A1 RADIATOR 5120, 5130, 5140, 5220, 5230, 5240, 5250 TPIHC-0663$1325A190663 RADIATOR 7110, 7120, 7130, 7140, 7150, 7210, 7220, 7230, 7240, 7250 * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. Mufflers General Illustration Only TPIHC-640$125 533924R1 MUFFLER Length 30" 454, 574, 674 Shell Oval Inlet 23/8"ID Outlet 2"OD TPIHC-641$205 847867R92 MUFFLER Length 42" 530880R4 706, 756, 766, 866, 976 ShellOval Inlet 215/16"ID Outlet 3"OD TPIHC-642$290 534546R3 MUFFLER Length 44" 1066, 1466, 1566, 4166 ShellOval 4186, 4366, 4386 Inlet33/4"ID Outlet 31/2"OD TPIHC-993 $395 104852C1 MUFFLER Length 17" 786, 886 Shell Round Inlet 3" ID Outlet 3" OD Mufflers Duplicate Originals in Dimensions and Shape 9344 7433 TPIHC-748$360 103978C2 MUFFLER Length151/2” 986, 1086, 1486, 1586 ShellOval Inlet 39/16”ID Outlet 3”OD Prices exclude GST 21 International Case-IH Replacement Parts Ordering No.Price Original P/No. Description/Application Mufflers TPIHC-749$420 143660C1 MUFFLER Length25” 3388, 3588, 3788 ShellRound Inlet 31/2”ID Flared Outlet 33/8”OD TPIHC-750$435 144057C5 MUFFLER (WITH ASPIRATOR) 5088, 5288, 5488 Spark Arrested Mufflers available on request Length 171/2” Shell Oval Inlet39/16”ID Outlet 31/2”OD Injector Pumps TPIHC-315 $1795 - REBUILT INJECTOR PUMP EXCH 1066, 1086 MARKED 100-6A-100A9274-11 100-6A-100A9274-13 TPIHC-323 $1795 - REBUILT INJECTOR PUMP EXCH 1466, 1486 MARKED 100-6A-100A9258-2 100-6A-100A9275-4 100-6A-100A9275-6 100-6A-100A9275-7 TPIHC-934 $1995 - REBUILT INJECTOR PUMP EXCHANGE 1566, 1586 MARKED 1006A 1009274-12 1006A 1009274-14 * If no exchange injector pump add $250.00 to above prices TPIHC-777$75 3132697R92 3055375R93 FUEL LIFT PUMP 3, 4 & 6 cyls Neuse Engines TPIHC-747$600 1802339C1 400 SERIES CAMSHAFT 414, 436, 466 EARLY & LATE - SUITS 1" & 11/8" LIFTERS TPIHC-1407$19911776R3 684729C1 LIFTER (FOLLOWER, TAPPET) 1" diameter - 400 Series TPIHC-1408$33676865C4 EXHAUST VALVE 400 Series TPIHC-1409$22675046C2 INTAKE VALVE 400 Series RECOnditioned ENGINE OIL COOLER TPIHC-1633$975 690884C2 680239C92 D414, D436, D466 Natural, Turbo & Intercooled 677092C92 TPIHC-1262$130 3136053R92 3132739R93 WATER PUMP 112mm impellor D239, DT239 engines, 385, 454, 474, 484, 485, 574, 584, 585, 674, 684, 685, 784 TPIHC-780$165 3132676R93 3138936r92 WATER PUMP 17 mm shaft D310, D358, DT358 Neuse engines 766, 786, 866, 886, 976, 986 TPIHC-1263$295 3144661R93 WATER PUMP Heavy Duty Bearing 24mm shaft D310, D358, DT358 engines 766, 866, 886, 976, 986, 696, 3288 TPIHC-243$325 672644C91 673162C94 WATER PUMP 8 fin impellor - SUIT DT414, DT436, DT466 1066, 1086, 1466, 1486, 1566, 1586 * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. Engine Parts Prices exclude GST 22 9344 7433 International Case-IH Replacement Parts Ordering No. Price Original P/No. Description/Application Engine Parts TPIHC-9338 $210J802479 J802975 TPIHC-1433 water pump assembly Maxxum Models 7110, 7120, 7130, 7140, 8.3ltr Cummins $6203132435R1 WATER MANIFOLD - 6 CYL NEUSS TPIHC-1871 $8003136057R14 TIMING COVER (Reconditioned) IH 454-986 Tractors TPIHC-1871EXC $150 TIMING COVER DEPOSIT (Refundable) $95- TPIHC-1291 REAR MAIN SEAL AND WEAR SLEEVE All 400 Series IH engines TPIHC-1292 $52- FRONT SEAL AND WEAR SLEEVE All 400 Series IH engines TPIHC-1293 $363188701R91REAR MAIN SEAL (SEAL ONLY) All 3, 4, 6 cyl Neuss engines TPIHC-1294 $1153228133R93 FRONT MAIN SEAL AND WEAR SLEEVE All 3, 4, 6 cyl Neuss engines $650193432A1AMSTARTER MOTOR - Nippon Denso Replacement TPIHC-3432 MX180, MX200, M220, MX240, MX270 STX275, STX325, 8910 to 8950 TPIHC-539 $600 DUS 539N N E W STARTER MOTOR 696, 766, 866, 976, 1066, 1466, 1566, 1568, 4166, 4366, 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3488, 3688 TPIHC-1448 $45091448C1 NEW STARTER MOTOR 7110, 7120, 7130, 7140, 7210, 7220, 7230, 7240, 7250, 8910, 8920, 8930, 8940, 8950, 9110, 9130, 9150 Crankshafts TPIHC-1073 $2000675669C3 179197A1 675591C2 CRANKSHAFT 466, 467, 468 Engines inc Turbo's * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. TPIHC-1404 $8676679C2 CONROD BOLT 400 Series 9344 7433 Clutches TPIHC-685-1 $190 3121507R94 CLUTCH PLATE ONLY H/D (6 button) 11" diameter 454, 475, 484, 485, 574, 584, 585, 674, 684, 685, 695 784, 785, 884, 885, SINGLE CLUTCH TPIHC-685-2 $205 92602C1 PRESSURE PLATE ASSY ONLY H/D 11" diameter 454, 475, 484, 485, 574, 584, 585, 674, 684, 685, 695 784, 785, 884, 885, SINGLE CLUTCH TPIHC-324-1 $320 384395R1 CLUTCH PLATE (4 button) 12” diameter 554, 564, 686, 696, 706, 756, 766, 786, 806, 856, 866, 886. 3088, 3288. Some 986 Prices exclude GST 23 International Case-IH Replacement Parts Ordering No. Price Original P/No. Description/Application Clutches We recommend using TPIHC-358-1 & TPIHC-358-2 in all heavy duty applications TPIHC-358-1$295 104495R1 TPIHC-358-2$460 104496R1 CLUTCH PLATE (6 button) 12” diameter 554 to 3288. Some 986, 3688 PRESSURE PLATE 12” diameter 554, 564, 686, 696, 706, 756, 766, 786, 806, 856, 866, 886, 3088, 3288 TPIHC-995-1$295 393117R1 CLUTCH PLATE (Large 6 button) 14” diameter 976, 1066, 1086. Some 986 TPIHC-359-1$295 394239HD CLUTCH PLATE (Large 6 button) 14” diameter 976, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 4100, 4166, 4186. Some 986 TPIHC-359-2$495 67597C1 PRESSURE PLATE 14” diameter 976, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 4100, 4166, 4186. Some 986 TPIHC-480-1$395 67736C1 142200C1 CLUTCH PLATE (Large 6 button) 14” diameter 1566, 1568, 1586, 3788, 6788 TPIHC-480-2$525 67735C1 PRESSURE PLATE 14” diameter 1566, 1568, 1586 TPIHC-765 $100 - CLUTCH BEARING & SEAL KIT 696, 706, 756, 766, 786, 806, 856, 866, 886, 966, 976, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 3088, 3288, 3688, 4100, 4166, 4186 TPIHC-766 $100 - CLUTCH BEARING & SEAL KIT 1566, 1586, 3788, 6788 TPIHC-767 $90 - CLUTCH BEARING & SEAL KIT 3388, 3588, 6388, 6588 TPIHC-774 $15 - PILOT BEARING 706 to 6788 TPIHC-776$13537290R91 PILOT BEARING B250, B275, 414, 434, 444, 374, 384, 454 to 885 Engine rebuild components Call us for a quote. All makes and models of Tractor or Truck * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. TPIHC-1446 $4951251902C1DRIVE PLATE (HYDRO) 188013C91 5088, 5288, 5488 Prices exclude GST 24 9344 7433 International Case-IH Replacement Parts Ordering No.Price Original P/No. Description/Application Clutches TPIHC-775$78 85104C91 THRUST RELEASE BEARING 454, 474, 475, 484, 485, 574, 584, 585, 695 674, 684, 685, 784, 785, 884, 885 TPFD-769 $50 832503 THRUST RELEASE BEARING 706 to 6788 SUITS all IHC fitted with TPIHC-324, TPIHC-358 TPIHC-359, TPIHC-480 & TPIHC-994 Assemblies TPIHC-1237$195 380109R2 THROWOUT BEARING CARRIER Greasable (Includes Bearing) Same as previous item TPIHC-414 $80 - HUB & RIVETS 13/4"ID 17 SPLINE Suit P/Plate TPIHC-324-2 & 358-2 TPIHC-415 $80 - HUB & RIVETS 13/4"ID 17 SPLINE Suit P/Plate TPIHC-359-2 TA Elimination Kits TPIHC-760$250 T/A ELIMINATION COUPLER & KEY 384, 385, 485, 574, 484, 584, 784, 884 485, 585, 674, 684, 685, 885 TPIHC-407$850- T/A ELIMINATION KIT 706, 756, 766, 786, 806, 856, 866, 886, 976, 986, 1066, 1086, 1256, 1456, 1466, 1468, 1486 3088, 3288, 3688 * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. Rebuilt TA's 9344 7433 TPIHC-1085 $1495** Rebuilt T/A REBUILT HEAVY DUTY T/A ASSEMBLY Assembly with lower gear. 756 to 1486 3088, 3288 , 3688 HEAVY DUTY with Extra Clutch Plates and Wider Sprag Gear **Add $150.00 to above price if no exchange TPIHC-1086$125 T/A Gasket Kit T/A GASKET KIT Incl MCV Kit Suits TPIHC-407, TPIHC-1085 Transmission & Final Drive Parts TPIHC-484$19071230C2 PTO INPUT SHAFT 21 tooth 10 SPLINE 454, 574, 674, 484, 584, 684, 784, 884 TPIHC-399$230 528676R1 PTO INPUT SHAFT 28 tooth 756 to 3688, 4166, 4186 Confirm Number of Teeth 25deg CUT TPIHC-400$17567596C1 PTO INPUT SHAFT 26 tooth 766 to 1486, 4166, 4186 Confirm Number of Teeth 25deg CUT TPIHC-310 $265104401C1 PTO INPUT SHAFT 28 tooth 25deg CUT 1586, 3388, 3588, 3788, 6388, 6588, 6788 Prices exclude GST 25 International Case-IH Replacement Parts Ordering No.Price Original P/No. Description/Application Transmission & Final Drive Parts TPIHC-408$325382349R1 QUILL SHAFT with bearings Late 756, 856, 1256, 1456, 766, 866, 976, 1066 1466, 1468, 786, 886, 986, 1086, 1486, 3088, 3288 3388, 3588, 3688, 6388, 6588 TPIHC-1289$951981317 TRANSMISSION BRAKE ARM WITH PAD 384311R1 706 thru to 1586, not 84 Series 3388, 3588, 3788, 4166, 4186 TPIHC-209$260406473R1 1st GEAR DRIVING 25deg CUT 27 teeth Late 756, 856, 1256, 1456, 696, 766, 866, 976, 1066, 1466, 1468, 786, 886, 986, 1086, 1486, 3088, 3288, 3388, 3588, 3688, 6388, 6588 TPIHC-463$325528672R1 2nd GEAR DRIVING 25deg CUT 32 teeth. Same as previous item TPIHC-209 TPIHC-1079$300528671R1 3rd GEAR DRIVING 42 teeth Same as TPIHC-209 25deg CUT TPIHC-1080$425528675R1 3rd & 4th SLIDING GEAR 31 teeth Same as TPIHC-209 25deg CUT TPIHC-461$180528673R1 LOWER CONSTANT MESH 47 teeth Same as TPIHC-209 25deg CUT TPIHC-462$275528670R1 CONSTANT MESH GEAR DRIVING 26 tooth Same as TPIHC-209 25deg CUT TPIHC-411$475148951C1 COUNTERSHAFT (LH thread) Late 756, 856, 1256, 1456, 696, 766, 866, 966, 976, 1066, 1466, 1468, 1566, 1568, 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4166, 4186, 6388, 6588, 6788 CROWN WHEEL & PINION 1466, 786, 886, 986, 1086, 1486, 1468, 3088, 3288, 3488, 3688. 3388, 3588, 6388, 6588. (Also fits 756, 856, 766, 866, 976, 1066 with TPIHC-746 kit) Brake Parts TPIHC-398$40 1975468C2 BRAKE DISC (8” diameter) 706 to 1066 (& 1480-1680 headers) TPIHC-1343$32 TPIHC-1342$175 528702R 1975472C1 BRAKE O-RING KIT 706 to 1066, 1456, 1466, 1468 Suits slave cylinder TPIHC-763$400 120235C1 TPIHC-0067$70 A190067 BRAKE KIT (WET TYPE) 786, 886, 986, 1486, 3088, 3288, 3388, 3488, 3688, 3788, 6388, 6588 Includes discs & “O” ring BRAKE DISC 113/4” diameter 5120, 5130, 5140, 5220, 5230, 5230, 5240, 5250, MX100, MX110, MX120, MX135 BRAKE DISC (111/2” diameter) 1456, 1466, 1468 * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. TPIHC-419$1750528707R93 Prices exclude GST 26 9344 7433 International Case-IH Replacement Parts Ordering No.Price Original P/No. Description/Application PTO Parts TPIHC-196$185 393111R1 PTO SHAFT 540 rpm - 107/8” LONG All 06, 56, 66, 86 Series. Some 88 Series TPIHC-0985$430 120985C1 PTO SHAFT - 1000 RPM - 1131/32” LONG All 06, 56, 66, 86 series. Some 88 Series TPIHC-773$150 68803C2 68802C2 PTO CLUTCH DISC KIT (HEAVY DUTY) 7 FRICTION & 9 SEPARATOR DISCS 06, 56, 66, 76, 86 Series & some 88 Series TPIHC-1083$8577720C94 GASKET KIT DUAL SPEED PTO 06, 56, 66, 76, 86 Series & some 88 Series Hydraulic Pumps & Parts MCV HYD PUMP 12gpm (TRW REPLICA) 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3688 TPIHC-764$525 527397R93 391354R1 MCV HYD PUMP 9gpm (TRW REPLICA) 706, 756, 766, 806, 856, 866, 966, 976, 1066, 1256, 1456, 1466, 1468, 1566, 1568 TPIHC-1286$200 405181R1 MCV PUMP GEAR 250 Late 756, 856, 766, 866, 976, 1066, 1466, 1468 1566, 1568, 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3688 TPIHC-756$550 70931C1 HITCH PUMP 12gpm (TRW REPLICA) 696, 706, 756, 766, 786, 806, 856, 866, 886, 966, 976, 986, 1066, 1086, 1256, 1466, 1468, 1486, 1586, HYDRO 100 & 186 TPIHC-1713$65093835C92 HYDRAULIC PUMP 385, 395, 454, 474, 484, 485, 495, 574, 584, 585, 595, 674, 684, 685, 695, 784, 785, 884, 885, 8895, 3210, 3220, 3230, 4210, 4220, 4230, 4240 * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. TPIHC-218$625 120114C1 9344 7433 Engine rebuild components Call us for a quote. All makes and models of Tractor or Truck Prices exclude GST 27 International Case-IH Replacement Parts Ordering No.Price Original P/No. Description/Application Drawbar Parts TPIHC-388 $425 - DRAWBAR ROLLER ASSY COMPLETE SUITS 06 to 86 & 88 Series & 5000 Series TPIHC-389 $190 - ROLLER, STEEL SEALS & BEARINGS ONLY SUIT TPIHC-388 TPIHC-390 $110 - SHAFT & NUT ONLY SUIT TPIHC-388 TPIHC-391 $185 - BRACKET & BOLTS ONLY SUIT TPIHC-388 Rear Axle Parts TPIHC-1241$2201287802C92 WHEEL WEDGE ASSEMBLY Suits 31/2” AXLES TPIHC-935$240 109318C2 REAR WINDOW GLASS 86 and 88 Series TPIHC-744$140 109319C2 SIDE WING WINDOW GLASS 86 Series up to Cab S/No. 107806 - 31” High TPIHC-936$110 1250436C2 SIDE WING WINDOW GLASS LATE - 86 Series from Cab S/No. 107807 up All 88 Series - 323/4” High TPIHC-6000 $45082036000 CAB GLASS - Door Right Hand Maxxum 120, 130, 140, 155, 175, 190 TPIHC-6001 $72582036001 CAB GLASS - Door Left Hand Maxxum 120, 130, 140, 155, 175, 190 TPIHC-0296 $40082000296 CAB GLASS - Front Maxxum 120, 130, 140, 155, 175, 190 TPIHC-1923$18582001923 CAB GLASS - Front Lower Left Hand Maxxum 120, 130, 140, 155, 175, 190 TPIHC-1924 $18582001924 CAB GLASS - Front Lower Right Hand Maxxum 120, 130, 140, 155, 175, 190 TP-541$140539031R1 FAN MOTOR 3 SPEED 3/8” DOUBLE SHAFT 12 VOLT TP-543$160117784C1 1987399C92 FAN MOTOR REVERSIBLE 3 SPEED 5/16” DOUBLE SHAFT 12 VOLT NEW TPIHC-8369 $62598369C3 AIR CONDITIONER EVAPORATOR COIL (With Heater Coil) 7110, 7120, 7130, 7140, 7150 NEW TPIHC-4042 $62560-4042t1 AIR CONDITIONER EVAPORATOR COIL (With Heater Coil) 9130, 9150, 9170, 9180, 9210, 9230, 9240, 9250, 9270, 9280 NEW TPIHC-6677 $62560-6677t1 AIR CONDITIONER EVAPORATOR COIL (With Heater Coil) 9210, 9230, 9240, 9250, 9260, 9270, 9280, 9310, 9330, 9350, 9370, 9380, 9390 * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. Cab Parts Prices exclude GST 28 9344 7433 John Deere Replacement Parts Ordering No.Price Original P/No. Description/Application * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. Front Axle & Steering Parts 9344 7433 NEW TPJD-204HD$400AR55179 Heavy Duty 3010, 4010, 3020, 4020 After Serial No 250001 TPJD-206$350 AR81954 STUB AXLE 145/8" Long King Pin 4040, 4240, 4440, 4050, 4250, 4450 4055, 4255, 4455 TPJD-3880$625 AR53880 STUB AXLE 4640, 4840, 4850, 4560, 4760, 4960 WBK-JD-204$100- WHEEL BEARING & SEAL KIT Suits TPJD-204 WBK-JD-205$85- WHEEL BEARING & SEAL KIT Suits TPJD-205 WBK-JD-206$90- WHEEL BEARING & SEAL KIT Suits TPJD-206 WBK-JD-487$90- WHEEL BEARING & SEAL KIT Suits TPJD-486 & TPJD-487 TPJD-376$110 R48763 FRONT HUB 6 stud 3010, 4010, 3020, 4020, 4320, 4030, 4230, 4430 TPJD-272$240 R63556 R63555 R40194 FRONT HUB 8 stud 5/8" UNF 5020, 6030, 4630, 4640, 4840, 4650, 4850, 4555, 4955, 4560, 4950 TP-1602$4 - WHEEL BOLT 9/16" x 111/16” TP-1604$6 - WHEEL BOLT 5/8" x 2" TPJD-374$62 AR28115 TIE ROD INNER 3010, 4010, 3020, 4020, 4320, 4230 TPJD-375$60 AR51584 TIE ROD OUTER 3010, 4010, 3020, 4020, 4320, 4230 TPJD-751$55 AR27430 TIE ROD END - FIXED TRACK AXLE 3010, 4010, 3020, 4020 - L/H thread TPJD-352$50 AR63588 TIE ROD INNER 4030, 4230, 4430, 4040, 4240, 4440, 4050, 4250, 4450, 4055, 4255, 4455, some 4630 TPJD-353$80 AR63592 TIE ROD OUTER 4030, 4230, 4430, 4040, 4240, 4440, 4050, 4250, 4450, 4055, 4255, 4455 TPJD-354$80 AR63589 TIE ROD INNER Some 4630, ‑4640, 4650, 4555, 4755, 4560, 4760 TPJD-2325$120 RE12325 TIE ROD INNER 4050, 4055, 4250, 4255, 4450, 4455, 4555, 4560, 4650, 4755, 4760, 4955, 4960 Prices exclude GST 29 John Deere Replacement Parts Ordering No. Price Original P/No. Description/Application Front Axle & Steering Parts TPJD-355$105AR63833 TIE ROD OUTER Some 4630, 4640, 4650, 4555, 4755, 4560, 4760 TPJD-357$130AR85946 TIE ROD OUTER 4840, 4850, 4955, 4960 TPJD-1322 $45 AR21945 AF3178R TIE ROD END LH THREAD 520, 530, 620, 630, 720, 730, 820, 830 TPJD-1321 $40 AR21944 AF3177R TIE ROD END RH THREAD 520, 530, 620, 630, 720, 730, 820, 830 TPJD-1324 AT27130 $50 AL39020 TIE ROD END INNER 11/8” ID 1020, 1120, 2020, 2120, 1130, 840, 940, 1040, 1140 1550, 1750, 1850 TPJD-1325 $55 AT27134 AL39024 TIE ROD END OUTER 1020, 1120, 2020, 2120, 1130, 840, 940, 1040, 1140 1550, 1750, 1850 Radiators TPJD-1072$1150AR61879 RADIATOR AR618784430 TPJD-615$1475 RE21895 AR90742 RADIATOR 4640, 4840 TPJD-1828$980 AR61883 AR62663 RADIATOR 4230 with Aircon TPJD-1829$1300 AR61884 AR61890 RADIATOR 4630 with Aircon TPJD-1830$2350 AR76838 RADIATOR 8630 TPJD-1831$2075 RE21561 RADIATOR 8430, 8440 TPJD-1832$1100 RE21897 RADIATOR 4440 TPJD-1891$850 RE21894 RADIATOR 4040, 4240, 4440 TPJD-1892$1175 RE38664 RADIATOR 4050, 4250, 4450, 4055, 4255, 4455 TPJD-1896 $1275RE21896 RADIATOR 4640 RE24732 TPJD-4732$3000 RADIATOR 8650 * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. AR49454 RADIATOR TPJD-1440$800 AR408324020 Prices exclude GST 30 9344 7433 John Deere Replacement Parts Ordering No. Price Original P/No. Description/Application Mufflers General Illustration Only TPJD-631$125AR86595MUFFLER AR241171 4000, 4020, 3020 4230, 4030, 4040 Length27" Oval - 4" x 9" Shell InletFlared Outlet21/4" OD TPJD-632$230AR86597MUFFLER RE22020 3130, 4240, Some 4050 Length38" Shell Oval - 41/4" x 8" Inlet215/16" Outlet25/8" OD TPJD-1301$375AR61073MUFFLER AR86599 4430, 4630, 4440, 4640 RE20224 4050 s/n. 5511 & up, 4250, 4450 4055, 4255, 4455 Length38" Shell Oval - 43/4" x 9" Inlet35/16" ID Outlet31/2" OD TPJD-633$330RE22022 MUFFLER AR86602 4840, 4650, 4850 AR77304 4555, 4755, 4955 Mufflers Duplicate Originals in Dimensions and Shape Length38" Shell Oval - 41/4" x 91/2 Inlet315/16" Outlet 4" OD TPJD-991$230AR61074MUFFLER R35637 5010, 5020, 6030 Non Turbo only Length37" Shell Oval - 41/4" x 91/2 Inlet35/8"ID Flared Outlet31/2" OD TPJD-1302$475AR86604MUFFLER (Straight aspirator) 8430, 8630 Length38" Shell Oval - 8" x 111/2 Inlet35/16" ID Outlet 5" OD TPJD-1300$575AR89594MUFFLER (Curved aspirator) 8440, 8640 Length38" Oval - 8" x 111/2 Shell Inlet35/16" ID Outlet 5" OD Spark Arrested Mufflers available on request Engine Parts * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. TPJD-465 $590AR100385CAMSHAFT 404T to 466T MOTORS (Turbo's only) 9344 7433 TPJD-743$20R52773 CAMSHAFT LIFTER 404T, 404A, 466T, 466A. USED WITH TPJD-465 TPJD-1662$850RE53884 CAMSHAFT AND LIFTER KIT 6/329, 6/359, 6059, 6058 ENGINES TPJD-1328$600RE12820 HARMONIC BALANCER (Exchange) 329/359/359T ENGINES *$100 Deposit Payable Refunded On Return Worn Balancer TPJD-614$300R56995 AR54563 Prices exclude GST FRONT EXHAUST MANIFOLD 6/404T, 6/466T, 4430, 4630, 8430, 4440, 4640, R50391 4840, 8440, 4050, 4250, 4450, 4650, 4850, 8450, Headers - late 7700, 6670, 7720, 8820 Cotton 9940, 9950 31 John Deere Replacement Parts Ordering No. Price Original P/No. Description/Application Engine Parts TPJD-1437 $300 T20249 EXHAUST MANIFOLD 2020, 2120, 2030, 2130, 2440, 2640 CHAMBERLAIN 3380 TPJD-0852 $560 AL70852 STARTER MOTOR 6000, 6800, 6610, 6810 TPJD-1448 $300 WATER PUMP - REMANUFACTURED **$50 CORE EXCHANGE** 4320, 4430, 4520, 4620, 4630, 7020 $450 TPJD-1642 RE20023 WATER PUMP 4430, 4630, 7020 TPJD-5985 $480RE55985 WATER PUMP 4050 to 8450, 4055 to 4955, 4560 to 4960 TPJD-1157 $175RE41157 WATER PUMP 7600, 7700, 7800, 6200, 6300 6400, 6500 TPJD-0022 $475RE20022 WATER PUMP 4040, 4440, 4540, 4840, 8440, 9940 TPJD-3295 $200RE23295 WATER PUMP REPAIR KIT 4050 to 8450, 4055 to 4955, 6.466T Engine TPJD-1663 $70 RE42211 RE43272 AR57264 AR53367 FUEL LIFT PUMP All Models With A Diaphram Type Pump 1020 thru to 4240 $800 TPJD-1628 RE19778 AR73626 RE19784 AR87421 TURBOCHARGER 4440, 4640, 4840, 8440, 4250, 4450, 4650, 8430, 4850, 8450 Crankshafts TPJD-1009 $1395AT22562 CRANKSHAFT 6 cyl Suits 329 359 Engines TPJD-1070 $2950 RE53422 CRANKSHAFT 6 cyl Suits late and early 404 & 466 engines With or without Oil Pump Drive Gear TPJD-1369 $3000RE45517 RE33687 CRANKSHAFT 6 cyl 414 - 6068 * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. TPJD-946 $475 12 VOLT STARTER MOTOR AL41247 2 Bolt Mount 10 tooth Gear AL62772 1020, 1120, 2020, 2120. 830, 930, 1030, 1130, AL39700 1630, 1830, 2030, 2130, 3030, 3130 AL67897 840, 940, 1040, 1140, 1640, 1840, 2040, 2140, AL70850 3040, 3140, 3640. 1350, 1550, 1750, 1850, 1950, AL110597 2250, 2450, 2850, 3150, 3350, 3650 6100, 6200, 6300, 6400, 6110, 6210, 6310, 6410 Prices exclude GST 32 9344 7433 John Deere Replacement Parts Ordering No.Price Original P/No. Description/Application Crankshafts TPJD-1405$11T20009 R74194 CONROD BOLT 54mm 152, 164, 179 3 cylinder engines 202, 219, 239 4 cylinder engines 303, 329, 359 6 cylinder engines TPJD-1402$11R66452 CONROD BOLT (400 Series) * Check length of Conrod Bolts - Can be 54mm or 61mm long. Transmission & Final Drive Parts TPJD-380$2100 AR99193 AR71695 CROWN WHEEL & PINION (front) 8430, 8630, 8440, 8450 TPJD-443$2200 AR71696 R57149 R57148 CROWN WHEEL & PINION (rear) 8430, 8630, 8440, 8640, 8450, 8650 PTO Shafts TPJD-220$235 R38224 R80744 R94130 T28672 PTO SHAFT 1000rpm 3020 after S/N 123000 4020 after S/N 201000 4320, 3130, 4030, 4230, 4430, 4040, 4240, 4440 4050, 4250, 4450, 4055, 4255, 4455 TPJD-221 $235 AR41752 R38223 R41756 PTO SHAFT 540rpm (includes end bush) Same as previous item TPJD-6976 $230 L156976 NEW PTO SHAFT REVERSIBLE 540RPM - 1000RPM 6110, 6200, 6210, 6300, 6310, 6400, 6405, 6410, 6500, 7200, 7210, 7400, 7410, 7420, 7500 * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. Hydraulic Pumps & Parts 9344 7433 TPJD-488$140 R34359 HYD PUMP COUPLING SHAFT 5010, 3020, 4020, 5020 TPJD-489$220 R50215 HYD PUMP COUPLING 4430, 4630, 4240, 4440 TPJD-490$160 R43075 HYD PUMP COUPLING SHAFT 4520, 4620, 7020, 4230, 4040 TPJD-491$200 HYD PUMP COUPLING SHAFT 4230 TPJD-492$36 R34362 TPJD-643$9R34360 AT423089 AT42311 AT42312 HYD PUMP COUPLING BLOCK (sold per half - 2 reqd) All 20, 30, 40 Series TPJD-644$12 R46345 HYD PUMP COUPLING PIN (Threads into engine pulley end) 3020, 4020, 4320, 4520, 5020, 7020 4230, 4430, 4630, 2840, 4040, 4240, 4440 TPJD-645$5R45822 HYD PUMP COUPLING BUSH USED ON ALL SERIES, 10 TO 55 Prices exclude GST HYD PUMP COUPLING PIN (Threads into coupler end) 3020, 4020, 4320, 4520, 5020, 4230, 4430, 4630 4040, 4240, 4440, 2840 33 John Deere Replacement Parts Ordering No.Price Original P/No. Description/Application TPJD-982$90 RIGHT HAND HEADLIGHT ASSEMBLY 830, 930, 1030, 1130, 1630, 2030, 2130, 3030 3130, 840, 940, 1040, 1140, 1140, 1640, 1840, 2040 , 2140, 3040, 3140, 3340, 3640, 1350, 1750, 1850, 2250, 2450, 2650, 2850, 3350, 3650 TPJD-983$90 LEFT HAND HEADLIGHT ASSEMBLY Same as previous item TPJD-985$115 R59961 NOSE CONE 830, 930, 1030, 1130, 1630, 1830, 2030, 2130 TPJD-988$125 R52362 NOSE CONE 840, 940, 1040, 1140, 1640, 1840, 2040, 2140, 3040, 3140, 3640, 4040, 1850, 3050, 3350, 3650, 4230 TPJD-742$500 FIBREGLASS CAB ROOF Suits Sound Guard cab, 2 & 4WD (North American) 30, 40, 50, 55, 60 Series TPJD-788$250 R50758 REAR WINDOW Suit Sound Guard Cab 2 & 4WD (North American) 30, 40, 50, 55, 60 Serie NEW TPJD-7210$875 R157210 DOOR GLASS - Left Hand 8100, 8200, 8300, 8400, 8110, 8210, 8310, 8410 8120, 8220, 8320 Wheel and Track Models NEW TPJD-8989$350 L78989 GLASS - CAB DOOR 6110, 6120, 6200, 6210, 6220, 6300, 6320 6400, 6410, 6420, 7220, 7320, 7420, 7520 TPJD-9103$290 L169103 GLASS DOOR - Right Hand 6110, 6120, 6210, 6220, 6310, 6320, 6410, 6420 and some 6200, 6300, 6400, 6500 - Comfortgard cab TP-541$140AH80194 FAN MOTOR 3 Speed. 3/8" double shaft. 12 volt TP-542$140AR62497 AR63511 FAN MOTOR Reversible One Speed. 5/16" double shaft. 12 volt TPJD-1303$425 AR88076 AR85245 AR79362 AR73463 CAB EVAPORATOR/HEATER North American Sound Guard Cabs Late 30 Series, All 40, 50 & 55 Series TPJD-616$130 AR72950 AT35236 SIDE SCREEN 2020, 1830, 2030, 2130 TPJD-984$155 AR26849 SIDE SCREEN 3010, 3020 TPJD-1062$140AR32720 AR26539 SIDE SCREEN 4000, 4010, 4020 TPJD-1435 $260 RE12764 SIDE SCREEN with clamp & knob 4250, 4450, 4050 Ser No. 5511 ON, 4055, 4255, 4455 * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. Cab Parts & Panels & Lights Prices exclude GST 34 9344 7433 John Deere Replacement Parts Ordering No. Price Original P/No. Description/Application Cab Parts & Panels & Lights * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. TPJD-382 9344 7433 $195 AR55022 4430, 4240 TPJD-383 $195 AR65461 SIDE SCREEN 4630, 4440, 4640 $180 AR69164 TPJD-385 SIDE SCREEN 8430, 8630, 8440, 8640 $200AR98442 TPJD-1254 SIDE SCREEN 8450 - 8650 TPJD-1306 $50R57970 RH SIDE BATTERY BOX COVER 4030, 4230, 4430, 4630 4040, 4240, 4440, 4640, 4840 4050, 4250, 4450, 4650, 4850 with Soundguard cabs TPJD-1307 $50R57971 LH SIDE BATTERY BOX COVER 4030, 4230, 4430, 4630 4040, 4240, 4440, 4640, 4840 4050, 4250, 4450, 4650, 4850 with Soundguard cabs TPJD-1308 $135 AR85335 AR65024 AR64346 RH TOP STEP BATTERY BOX COVER 4030, 4230, 4430, 4630 4040, 4240, 4440, 4640, 4840 4050, 4250, 4450, 4650, 4850 with Soundguard cabs TPJD-1309 $135AR85336 AR65025 AR64347 LH TOP STEP BATTERY BOX COVER 4030, 4230, 4430, 4630 4040, 4240, 4440, 4640, 4840 4050, 4250, 4450, 4650, 4850 with Soundguard cabs TPJD-1410 $470 MUDGUARD - FENDER RHS 30 to 50 Series with US made JD Soundguard cabs AR87731 RE11219 AR77112 TPJD-1411 $470AR14987 AR87732 RE11220 AR77111 Prices exclude GST MUDGUARD - FENDER LHS 30 to 50 Series with US made JD Soundguard cabs 35 Massey Ferguson Replacement Parts Ordering No.Price Original P/No. Description/Application Front Axle & Steering Components TPMF-227$100 897579M91 STUB AXLE L/H - 113/8" KING PIN 65 MkI & early MkII TPMF-228$100 897569M91 STUB AXLE R/H - 113/8" KING PIN 65 MkI & early MkII WBK-MF-227$45- WHEEL BEARING & SEAL KIT Suits TPMF-227 & TPMF-228 WBK-MF-931$60- WHEEL BEARING & SEAL KIT Suits TPMF-931 TPMF-224$701026382M3 TIE ROD OUTER 1100, 1105, 1130, 1135, 1150, 1155 TPMF-225$801026383M91 TIE ROD INNER 1100, 1105, 1130, 1135, 1150, 1155 TPMF-403$100 1028265M1 TIE ROD LONG 1080, 1085 TPMF-404$601028268M1 TIE ROD SHORT 1080, 1085 TPMF-405$703045062M91 TIE ROD INNER STD DUTY 2675, 2705 1” Diameter TPMF-406$135 3040676M92 TIE ROD OUTER STD DUTY 2675, 2705 TPMF-410$75162676M93 TIE ROD INNER SHORT HEAVY DUTY 2675, 2705, 2745, 2775, 2805 1 1/8” Diameter TPMF-422$125 3038564M92 TIE ROD LONG HEAVY DUTY 2675, 2705, 2745, 2775, 2805 TPMF-692$450 897146M94 897147M95 1666726M91 1666727M92 POWER STEERING PUMP (No Gear) 165 fitted with 4/212 motor 168 to 188, 265 to 298, 565 to 690 TPMF-420$675 523089M91 POWER STEERING PUMP (With Gear) 285, 1080, 1085, 698 TPMF-687$145 1676665M1 STEERING SHAFT 342mm LONG 168 to 188, 265 to 290 w/power steering TPMF-690$160 1671335M1 TOP STEERING ARM ON SHAFT with power steering 165 to 188, 265 to 290, 565, 575, 590, 675, 690 TPMF-691$150 898355M91 INTERMEDIATE ARM ON SHAFT with power steering 165 to 188, 265 to 290, 565, 575, 590, 675, 690 * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. TPMF-931$270 553311M1 STUB AXLE HEAVY DUTY 157/8" KING PIN 906106M951085 Prices exclude GST 36 9344 7433 Massey Ferguson Replacement Parts Ordering No.Price Original P/No. Description/Application Radiators TPMF-947$370 181623M1 180291391 186830M91 TPMF-0499$4451660499M92 TPMF-7358$420897358M4 TPMF-1193$3951874445M93 TPMF-5059$995897358M4 RADIATOR TEA20, 35, 135 Petrol RADIATOR 135, 148 RADIATOR 165, 168, 178, 185, 188, 250, 265 275, 285, 565, 575, 590 RADIATOR 230, 240, 245, 250, 350 RADIATOR 3085, 3095, 3120, 3070, 3075, 6150, 6160, 6160, 6170, 6180 Mufflers TPMF-637$80194431M91 TPMF-2526$140- TPMF-638$160 535950M91 535950M92 TPMF-639$200 528068M92 Spark Arrested Mufflers avaliable on request MUFFLER 165, 168, 175, 178, 185, 188 240, 250, 550, 154, 254, 290, 590, 690, 184, 194, 284, 294 MUFFLER SPARK ARRESTED 168, 178, 188 MUFFLER 285, 1080, 1085 MUFFLER 1105, 1135 Length40" Shell41/4" Inlet21/8"ID Outlet2"OD Length24" ShellOval Inlet23/4"ID Outlet23/4"OD Length28" ShellOval Inlet37/16"ID Outlet31/2"OD * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. Engine Parts 9344 7433 TPMF-695$325 1868285M91 3597372M2 12v STARTER MOTOR - Heavy Duty mounts on L/H side of engine 165 fitted with 4/212 engine 168 to 188, 265 to 290, 365 to 398, 565 to 595, 675 to 698, 1080, 1085, 3050 to 3070 TPMF-6643$3202873D004 12volt Starter Motor - Heavy Duty mounts on R/H side of engine MF35, 65, 135, 148, 165 (ADA-203), 240, 245, 250, 350, 550, TPFD-779$702641728 FUEL LIFT PUMP 165 with 212 engine 168 to 175 up to Eng. No. 236UA57134 185 to 188 up to Eng. No. 248UA71960, All 178 TPMF-1256$85 3637411M91 WATER PUMP 165 with 212 engine, 168, 175, 178, 185, 188, 265 275, 285, 290, 373, 393, 565, 575, 590, 675, 690 TPMF-1449 $31037712390 WATER PUMP - 15/16” DIA SHAFT 698, 1080, 1085 $340M744228M91 TPMF-1450 WATER PUMP suits Perkins A6-354 and AT6-354 Engines 399, 699, 2640, 2675, 3090, 3505, 3545, 3630, 3650 Prices exclude GST 37 Massey Ferguson Replacement Parts Ordering No.Price Original P/No. Description/Application Clutches & Components TPMF-442-1$480 528297M1 REBUILT 14" CLUTCH PLATE ONLY Exchange 1105, 1135, 1155 6 Button TPMF-442-2$725 528294M1 REBUILT 14" PRESSURE PLATE ASSY ONLY Exchange 1105, 1135, 1155 TPMF-443-1$150 519127M1 REBUILT 12" CLUTCH PLATE ONLY Exchange 285, 1080, 1085 TPMF-443-2$365 516406M92 REBUILT 12" PRESSURE PLATE ASSY Exchange 10 spn 285, 1080, Early 1085 REBUILT 12" PRESSURE PLATE ASSY ONLY TPMF-444-2$400 1808749M1 1635830M1 Exchange 25spn 285 to 1085, 595 with 12" *If no exchange pressure plate add $100.00 to above prices TPMF-771$48834602M1 TPMF-772$7 832960M1 THROWOUT BEARING 35 to 690, 1080, 1085, 1105, 1135, 1155 PILOT BEARING TE20, TEF20, 35, 65, 135, 165, 168, 175, 178, 185, 188, 240, 250, 265, 275, 285, 290, 350,355, 360, 365, 375, 390, 550, 565, 575, 590, 675,690, 698, 699, 1080, 1085 TPMF-305$340899332M91 PTO INPUT SHAFT (Multipower) 10 spline 17 tooth 65, 135, 150, 165, 175, 188 TPMF-622$5951808810M2 1808811M2 PTO INPUT SHAFT (Multipower) 25 spline 23 tooth 1085, 285 TPMF-248$1375 521978M1 HI-LO SHAFT 1105, 1135, 1155 TPMF-304$430516523M92 189396M91 MAIN INPUT SHAFT (Multipower) 65, 165, 175, 265, 275, 285, 180, 1085 TPMF-371$310520701M3 1682542M1 MULTI POWER MAINSHAFT 135, 148, 155, 158, 165, 168, 185, 188, 240, 250, 265, 275, 285, 290, 550, 565, 575, 590, 1080, 1085 TPMF-386$730189391M2 MULTI POWER COUNTERSHAFT 35, 65, 765, 135, 148, 155, 158, 165, 168, 175, 178, 185, 188, 240, 250, 265, 275, 285, 290, 550, 575, 590, 1080, 1085 TPMF-1285$245 - MULTI POWER TRANS CLUTCH KIT inc. springs & piston rings 35, 65, 135, 148, 165, 168, 175, 175, 185, 188, 235, 245, 255, 265, 275, 285, 290, 298, 375 * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. Transmission & Final Drive Parts Prices exclude GST 38 9344 7433 Massey Ferguson Replacement Parts Ordering No.Price Original P/No. Description/Application Transmission & Final Drive Parts TPMF-939$4401860889M91 884994M91 522054M91 RETAINER HOUSING MP TRANS Some 135, 148, 165, 168, 175, 178, 185, 188 All 235, 245, 255, 265, 275, 285, 290, 298, 670, 690, 698, 699, 1080, 1085 TPMF-430$470528380M2 SUNSHAFT 111/4" long 1105, 1135, 1155, 1150, 1505, 1800, 1805 * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. PTO Parts 9344 7433 TPMF-368$500518529M1 PTO SHAFT 540rpm 285, 1080, 1085 TPMF-226$340740635M1 PTO DRIVE FLYWHEEL HUB 1105, 1135, 1155 TPMF-303$350528009M1 PTO DRIVE SHAFT 331/16" LONG 1105, 1135, 1155 TPMF-278$50516006M3 PTO DRIVE SHAFT COUPLING 23/4" long 17 spline 1100, 1130, 1150, 1105, 1135, 1155 TPMF-267$440503433M1 PTO DRIVE SHAFT 115/8" long 1100, 1105, 1130, 1135, 1150, 1155 TPMF-280$221510114M2 677496 PTO STUB SHAFT 1000rpm 1100 1105, 1130, 1135, 1150, 1155, 21 spline TPMF-932$425509695M2 PTO STUB SHAFT 540rpm 1100 1105, 1130, 1135, 1150, 1155 TPMF-1252$2201610238M3 PTO SHAFT 540 rpm 2640, 2675, 2705, 2745, 2775, 2805 TPMF-1287$360M830473 PTO CLUTCH KIT inc. needle rollers, springs, piston & steel rings 135, 148, 165, 168, 175, 178, 185, 188 235, 245, 255, 265, 275, 285, 1080, 1085 TPMF-1711$335523551M1 523552M1 PTO CLUTCH DISC KIT 1100, 1130, 1150, 1105, 1135, 1155, 1505, 1805 Cab Parts TP-541$140 1048515M91 837170M91 Prices exclude GST FAN MOTOR 3 Speed 3/8” Double Shaft 12 Volt 39 Massey Ferguson Replacement Parts Ordering No.Price Original P/No. Description/Application Hydraulic Pumps TPMF-781$780 1686766M91 1686765M91 1663627M91 1675136M91 531607M93 AUXILLIARY HYDRAULIC PUMP 135, 165, 168, 175, 178, 185, 188, 240, 250, 265, 275, 290, 550, 560, 565, 575, 590, 675, 690, 698T, 699, 1080, 1085 TPMF-8730 $1520 3038730M2 PUMP HYDRAULIC LIFT 2640, 2675, 2705, 2745, 3505, 3525, 3545 3630, 3650, 3655, 3660, 3680 TPMF-9032 $900 1644582M92 HYDRAULIC PUMP 10 Spline MF135, 148, 165, 168, 175, 185, 188 TPMF-1236 $1025 1684583M92 HYDRAULIC PUMP 21 Spline MF135, 148, 165, 168, 175, 185, 188 TPMF-9033 $840 1683301M91 HYDRAULIC PUMP 21 Spline MF135, 148, 165, 168, 185, 188, 240, 250 265, 276, 285, 290, 298, 550, 565, 575, 590, 595, 675, 690, 698, 699, 365, 375, 390, 398, 399 Steiger transmission parts Assembled Wheel Ends or Parts Differential Parts Call us for Price & Availability * These are replacement parts only, not OEM. Mfg. numbers are used for reference only. Complete Axles Prices exclude GST 40 9344 7433 Agents for Bareco Bareco have a huge range of day to day requirements as well as thousands of tractor parts. Check the website www.bareco.com.au for easy to use access to a detailed listing of products. PTO SHAFTS & PARTS HYDRAULICS LINCH & “R” CLIPS EXHAUST PINS TIE-DOWN STRAPS CHAINS & HOOKS BOOSTER CABLES HYDRAULIC JACKS LIGHTING “O” RINGS FILTERS Harvest Catalo warranty Harvestaire warrant that it will repair or replace (whichever it deems advisable) any product manufactured and sold by it which it proves to be defective in material or workmanship with a period of, one year for new parts from the date of original purchase. Warranty service can be obtained by returning any defective product to Harvestaire. A purchase receipt or other proof of original purchase may be required before warranty service is rendered. If found defective under the terms of this warranty, repair or replacement will be made, without charge, together with a refund for transportation costs. if found not to be defective you will be notified and, with your consent, returned to you at your expense. The warranty covers normal use and does not cover damage or defect which results from alteration, accident, neglect or improper installation, operation or maintenance. Harvestaire’s obligation under this warranty is limited to the repair of replacement of the defective product (up to maximum purchase price). Harvestaire neither assumes or authorises any other person to give any other warranty or to assume any other obligation or liability on its behalf. Telephone: 9344 7433 Facsim ile: 9345 3256 18 Mumford Place Balcatta Weste Email: sales@ rn Australia 6021 harvestaire.c om.au Web Site: www.harvest aire.com.au parts return policy 1. Within 30 days of invoice date - No penalty (provided our suppliers don’t charge a penalty) 2. 30 days plus of invoice date - A restocking fee may be charged depending on circumstances. 3. After 90 days - Non-refundable. Special Buy-in items or made to order items are non-refundable. Most parts in this catalogue are not manufactured by the Original Equipment Manufacturer. Original Equipment Manufacturers names, part numbers and descriptions are quoted for reference purposes only. gue 2011-12 For a full range of Harvest products see our 2011-12 Catalogue All new parts are guaranteed to be interchangeable and be the functional equivalent of the O.E.M. parts they are intended to replace. TOP QUALITY PARTS All our parts are sourced from Australian, American and European manufacturers. They are manufactured to very high standards. They have been sold around Australia for over 20 years and have achieved real savings for many thousands of farmers. At Harvestaire our policy is to provide an equivalent or better product at a better price. Telephone: 9344 7433 Facsimile: 9345 3256 18 Mumford Place Balcatta Western Australia 6021 Email: [email protected] Web Site: www.harvestaire.com.au
© Copyright 2024 Paperzz