PAVE-Seal® Wire Harnesses Smallest, most compact seal designs and lowest costs, especially for large quantities. Other plastic housing shell materials besides PAVE-Seal epoxy such as Nylon, Ryton and PPS may also be available. Insulated, stranded conductor wires are standard (except for thermocouple wire which is normally solid conductor) with no detectable leakage through the wire insulation or conductors. Commercial or mil-spec wires may be specified. INSTALLATION PORT USING INTERNAL RETAINING RING B C INSTALLATION PORT USING EXTERNAL RETAINING RING SPF12 SPF18 A 15° A B C 0.37 0.438 0.376 SP6 1.21 0.540 0.506 SP8L SP11M 1.00 0.754 0.689 # of o-rings TRUA RC P/N 1 N5000-75 2 N5000-56 3 N5000-75 PAVE-Seal® Wire Harnesses See Website Quick Ship Price List PAVE-Seal® #2846 SP4S 4 #28 Teflon wires Hermetic seal vacuum to up to 250 bar (+3000 psi) pressure. Locked into place with internal retaining ring PAVE-Seal® #2244 15 #26 solid conductor Teflon wires Hermetic seal for vacuum to 10 bar (150 psi) Thin wall nitrile gasket face seal with nylon nut Other sizes available SP6 PAVE-Seal® #1632 SP6 6 #28 Teflon wires Hermetic seal for vacuum to 300 bar (5000 psi) pressures 6 Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165 Dimensions in inches [mm] PAVE-Seal® Wire Harnesses SP8 Dimensions in inches [mm] PAVE-Seal® #1226 SP8 Housing sizes Four different length versions with one or two O-rings for a variety of wiring PAVE-Seal® #0597 SP8L 9 #22 Tefzel wires Seals vacuum up to 200 bar (3000 psi) 12.57±0.25 .495±.010 PAVE-Seal® #2624 SP8L 2 #16 Tefzel wires Also used in low pressure 1 bar (15 psi) marine fuel pump seals PRESSURE ATMOSPHERE 0.02 290±6 11.42±.24 25.40 1.00 150±6 5.91±.24 4.75±0.76 .19±.03 PAVE-Seal® #2131 SP8M 2 #22 XLPE shielded cable Used in UV water purification systems PAVE-Seal® #0889 SP8S 6 #24 PVC wires Offshore seabed logging to 200 bar (3000 psi) pressures SP9 PAVE-Seal® #1627 SP9 16 #24 Teflon wires Super high pressures to 700 bar (10,000 psi) Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165 7 PAVE-Seal® Wire Harnesses SP11 Dimensions in inches [mm] PAVE-Seal® #1374 SP11 Housing sizes 3 different lengths with one or two O-rings PAVE-Seal® #2298 SP11M 21 #26 Teflon wires Vacuum to 200 bar (3000 psi) PAVE-Seal® #2316 SP11L 10 #24 Teflon wires Mass flow meters, fuel pumps, transmissions SPF12 PAVE-Seal® #2104 SPF12 10 #28 Teflon wires Vacuum to 40 bar (600 psi) PAVE-Seal® #1575 SPF12 4 #10 Teflon wires Up to 40 amps per wire ATMOSPHERE PRESSURE 2.64±0.15 2x .104±.006 AT TOP OF RADII AT GROOVE BASE PAVE-Seal #3053 ® 21.97±0.20 .865±.008 2 10.57±0.15 .416±.006 1 3.78±0.15 .149±.006 PLACE GREEN PAINT DOT HERE 15° INSTALLATION PORT 18.90±0.15 .744±.006 A DETAIL A SCALE 4 : 1 17.83±0.15 .702±.006 32 32 SPFL12 2 #14 & 2 #20 Teflon wires Fuel pumps, fuel cell systems 19.10±0.03 .752±.001 1 2 1 GROOVE 1 16.41±0.15 .646±.006 O-RING GROOVES 2 GROOVE 2 530 MIN 20.87 MIN - DENOTES FIT/FUNCTION KPC - DENOTES SAFETY/COMPLIANCE KPC - DENOTES QUALITY/CUSTOMER INTERFACE (QCI) 8 19.27 .76 4x 3.18 .1 20.16 19.85 .794 .781 185 MIN 7.28 MIN 255 MIN 10.04 MIN 11.81±0.15 3 .465±.006 13.26±0.15 .522±.006 11.30 10.99 .445 .433 4 Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165 1.07±0.05 .042±.002 PAVE-Seal® Wire Harnesses SP16 Dimensions in inches [mm] PAVE-Seal® #2189 SP16 12 #18 Teflon wires Vacuum to 40 bar (600 psi) Natural gas, propane, SF6, hydrogen gas systems SPF18 PAVE-Seal® #1733 SPF18 30 #22 Twisted Teflon wires Double O-rings, vacuum to 20 bar (300 psi) Humvee transmission, high voltage switch seals SP20 PAVE-Seal® #1707 SP20 70 #26 Teflon wires Vacuum to +200 bar (3000 psi) GE oil field equipment SP26 PAVE-Seal® #2722 SP26 42 Twisted, shield #28 Teflon pairs Vacuum to 40 bar (600 psi) Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165 9 PAVE-Seal® Wire Harnesses Standard Metal Housings For use in PAVE-Seal, PAVE-Mate, PAVE-Flex or PAVE-Optic Seal products. Customer to specify wiring and/or contact arrangement to be sealed in below housings. See following pages.Other sizes not shown may be available, including metric. Dimensions are subject to change. Explosion-proof housings to Factory Mutual, CSA, UL, or CENELEC EN specifications are also available. Confirm all pressure ratings above 300 psi (20 bar) with the factory sales engineers. (Shown without wires, pins, or epoxy seal) Available in 300 Series Stainless (SS), Brass (B), Galvanized Steel (PS), or Aluminum (AL). Other sizes available. Pipe Thread (NPT) 10- 6 Torr (mbar) to +3,000 psi (+200 bar) PAVE Part No. PT1 PT2 PT4 PT6 PT8 PT12 PT16 PT24 Thread Size inch 1/16 1/8 1/4 3/8 1/2 3/4 1 1 1/2 PT Length “L” inch mm 0.53 13,46 1.06 26,92 0.84 21,34 0.84 21,34 1.10 27,94 1.17 29,72 1.36 34,54 1.62 41,15 PTN Length “L” inch mm 1.06 26,92 1.06 26,92 1.45 36,83 1.45 36,83 1.89 48,01 1.97 50,04 2.34 59,44 2.61 66,29 Hex Size inch 0.38 0.50 0.71 0.85 1.00 1.30 1.60 2.30 Left or Hex Pressure Side Max “H” mm 9,65 12,70 18,03 21,59 25,40 33,02 40,64 58,42 PT Style Left Pressure Side PTN Style SAE Straight Thread O-Ring (UNF-2A Threads) 10-8 Torr (mbar) to +4,000 psi (+300 bar) PAVE Part No. S06 S08 S08L S012 S012L S016 S016L S022 S026 Thread Size inch 3/8 - 24 1/2 - 20 1/2 - 20 3/4 - 16 3/4 - 16 1 1/16 -12 1 1/16 -12 1 5/8 -12 1 7/8 -12 Length inch .061 0.67 1.50 0.80 1.25 1.09 1.50 2.00 2.12 “L” mm 15,49 17,02 38,10 20,32 31,75 27,69 38,10 50,80 53,85 Right Pressure Side Parker O-Ring “B” Size inch mm 3-3 .30 7,62 3-5 .36 9,14 3-5 .36 9,14 3-8 .44 11,18 3-8 .44 11,18 3-12 .59 14,99 3-12 .59 14,99 3-20 .63 16,00 3-24 .59 14,99 Hex Size inch 0.56 0.71 0.71 1.00 1.00 1.44 1.44 2.15 2.45 Max “H” mm 14,22 18,03 18,03 25,40 25,40 36,58 36,58 54,61 62,23 Left Side Pressure Side B Vacuum Seal and Jam Nut (UN-2A Threads) 10-8 Torr (mbar) to +1,000 psi (+70 bar) Left Side Pressure Side Thru hole diameter is +0.010, -0.000 inches (+0,254, -0.000 mm) thread size PAVE Part No. Thread Size Length “L” O-Ring “B” inch inch mm Size inch mm Hex Size inch Max “H” mm 1/2 - 20 3/4 - 16 1 - 1 4 1 1/4 -12 1 5/8 -12 1 7/8 -12 2 1/2 -12 0.96 1.25 1.73 1.91 2.59 2.88 3.25 24,38 31,75 43,94 48,51 65,79 73,15 82,55 VS8 VS12L VS15L VS18 VS22 VS26 VS32 0.90 1.48 1.88 1.88 2.00 2.12 2.25 22,86 37,59 47,75 47,75 50,80 53,85 57,15 -112 -116 -215 -219 -224 -226 -231 .44 1.03 1.25 1.25 1.25 1.25 1.25 11,18 26,16 31,75 31,75 31,75 31,75 31,75 B VS 8 T(in) .25 T(mm) 6.4 N(in) .77 N(mm) 20 12 15 18 22 26 32 .31 7.9 1.0 25 .32 8.1 1.6 36 .36 9.1 1.7 43 .39 9.9 2.3 58 .41 10 2.5 63 .41 10 3.3 83 Tighten nut to 20 ft-lbs max to avoid damage. NW, ISO, Conflat or ASA Vacuum Flanges 10-8 Torr (mbar) to 150 psi (+10 bar) PAVE NW40 Part No. NW16 NW25 10 Length inch 1.15 2.03 “L” mm 29,21 51,56 Tube O.D. inch mm 3/4 19,05 1 25,4 2.40 60,96 1-1/2 38,1 Product drawings at: www.PAVEtechnologyCo.com • Phone 1.937.890.1100 • Fax: 1.937.890.5165 L
© Copyright 2024 Paperzz