Assembly Types 0, 1, 2, and 3 Schematic of the Grid Spacer Estimates of the Grid Spacer Dimensions Assumptions: 1. Strip thickness of 0.3 mm; 2. Homogeneous arrangement. Dimensions used as reference values: 1. Outside rod diameter of 12.3 mm; 2. Outside water rod diameter of 15.0 mm; 3. Rod pitch of 16.2 mm; 4. Grid spacer total width of 132 mm. Technique used: 1. Simple measuring/scaling technique by applying two different scale ratios (vertical and horizontal) to the side view drawings (as provided by JNES). 2. Adjustments to the above-mentioned reference values to match all dimensions. Comment: Errors are possible because the graphics made available might have been deformed through different copying processes. Grid Spacer Dimensions 1.4 2.6 1.8 4.6 22.5 1.15 4.6 0.45 0.3 1.8 4.1 1.4 3.7 2.0 0.3 7.4 1.25 1.8 5.9 15.9 0.3 4.1 Top view – two rods & two water rods (center of the bundle) 10.1 0.3 Top view – four rods 6.8 18.2 0.8 0.95 1.8 2.2 6.0 3.0 15.9 16.2 0.3 Top view – corner of the bundle 3.1 2.2 10.5 2.0 3.0 4.0 45° 6.8 6.0 10.1 21.3 9.5 2.7 0.95 18.2 132.0 Side view 2.0 9.5 13.5 13.5 15.9
© Copyright 2024 Paperzz