A 1 B C REV VALUE ADDED SPLITTER MODULE CATALOG NUMBER SCHEME VSM 2 3 4 5 2 MCO DWN DATE S 20311406 JUM 24-AUG10 T 8000018222 JUM 15-DEC-16 &PTC_WM_REVISION:D 1 INPUT FIBER LENGTH (METERS) XX CODE D INPUT, OUTPUT POSITION & STYLE INPUT FRONT OUTPUT FRONT INPUT FRONT OUTPUT REAR INPUT REAR OUTPUT REAR INPUT REAR OUTPUT FRONT MODULE CONFIGURATION 9 CODE INPUT CONN STYLE CODE STUB END (BARE FIBER) 2U SMFC ULTRA POLISH W/ ZIRCONIA SLEEVE 2U SMFC ULTRA POLISH W/ ZIRCONIA SLEEVE 2A SMAFC ANGLED POLISH W/ ZIRCONIA SLEEVE 2A SMAFC ANGLED POLISH W/ ZIRCONIA SLEEVE 3--- 2N MMFC 50/125 2N MMFC 50/125 4--- 2M MMFC 62.5/125 2M MMFC 62.5/125 4U SMST ULTRA POLISH W/ ZIRCONIA SLEEVE 4U SMST ULTRA POLISH W/ ZIRCONIA SLEEVE MMST 62.5/125 5U STUB END (BARE FIBER) 5F 5U 7U 7A 9A 9B KU KM KA MMST 50/125 5F SMSC ULTRA POLISH W/ ZIRCONIA SLEEVE 7U MMSC 50/125 9A SMASC ANGLED POLISH 7A MMSC 62.5/125 9B SMLC ULTRA POLISH MMLC 62.5/125 LC ANGLE POLISH KU KM KA SPLIT RATIO 1X2, 2X2 N--- 1X3 & 1X2 P--- 1X4 & 1X2 A STANDARD SPLITTE 6--- 1X6 C TRIPLE SPLITTER 5--- MMST 50/125 7--- SMSC ULTRA POLISH W/ ZIRCONIA SLEEVE 9--- MMSC 50/125 MMST 62.5/125 SMASC ANGLED POLISH MMSC 62.5/125 SMLC ULTRA POLISH MMLC 62.5/125 LC ANGLEPOLISH 1X3 SPLITTER VARIATIONS 1X4, 2X4 1X5 B 1X7 D DUAL SPLITTER QUAD SPLITTER 2 8--- 1X8, 2X8 A--- 1X10 C--- 1X12, 2X12 E--- 1X14, 2X14 G--- 1X16, 2X16 H--- 1X18 NOTES: 2X28 1. UNLESS SPECIFIED BAND PASS IS: 2. IF CLEANING IS REQUIRED, SEE INSTALLATION INSTRUCTIONS. B--D--F--R--- K--L--M--- INPUT CONNECTOR STYLE 7 2--- J--- 3 OUTPUT FIBER LENGTH (METERS) OUTPUT CONN STYLE 00 00 YY 1X9 1X11 1X13 1X15 1X17 1X24 1X31 1X32 3 OUTPUT CONNECTOR STYLE 4. 5 6. 7 8. 1260nm 1360nm 1430nm 1580nm FASTENER NEAREST THE ADC LOGO IS TO BE MOUNTED TOWARD THE CENTER OF THE HORIZONTAL MOUNT CHASSIS AND TOWARD THE TOP OF THE VERTICAL MOUNT CHASSIS. 3 MODULE SHOWN UNLOCKED. INSERT MODULE INTO CHASSIS AND TURN FASTENERS 90 $ TO LOCK. ATTACH SUPPLIED LABELS TO APPROPRIATE MODULE POSITIONS ON CHASSIS DESIGNATION CARDS. UNLESS OTHERWISE SPECIFIED REFLECTANCE VALUES FOR ALL INPUT (A) PORTS ARE <-50dB. ALL UNUSED PORTS MUST BE TERMINATED FOR MEASUREMENTS TO BE VALID. SEE WEBSITE http://Stele.adc.com/Products/vam/splitter/index.html FOR COMPLETE LIST OF AVAILABLE SPLIT CODES. (WEBSITE ADDRESS IS CASE SENSITIVE.) INSERTION LOSS IN dB MAX, EXCLUDING CONNECTOR LOSS. TYPICAL CONNECTOR LOSS IS O.2dB (0.5dB MAX). 4 4 TITLE © 2016 COMMSCOPE, INC.CONFIDENTIAL NOTICE: THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPRIETARY PROPERTY OF COMMSCOPE, INC.AND MAY BE USED ONLY FOR THE SPECIFIC PURPOSE AUTHORIZED IN WRITING BY COMMSCOPE, INC. ALL DIMS AND TOLERANCES .XX: #N/A ARE INCHES UNLESS .XXX: #N/A OTHERWISE SPECIFIED ANGULAR: #N/A COMMSCOPE, INC. DO NOT SCALE DRAWING A B C ENGR: DWN: C VAM SPLITTER MODULE (INSTALLATION DRAWING) T DRAWING NUMBER SIZE DOUG HASSINGER KCCARLSON 1071050_ADC SHT. DIMENSIONS THIRD ANGLE 1 REV OF 4 IN INCHES PROJECTION A B C D 1 1 MODULE SCHEMATIC REF 3 10 9 10 7 8 6 9 2 2 5 10 8.61 REF 4 SCALE 0.500 3 2 9 1 3 1.06 REF 6.08 REF 5 FRONT CONNECTOR DESIGNATION LABELS 3 REAR FRONT Use either numbered or blank label for circuit designation NOTES: OPTICAL SCHEMATIC LABEL 4 9 SINGLE HEIGHT MODULE WITH (1) FRONT INPUT AND (4) REAR OUTPUTS SHOWN FOR REFERENCE ONLY. 10 THESE NUMBERS CORRESPOND TO THE PORT DESIGNATION ON THE TEST RESULT SHEET. INFORMATION ON THIS DOCUMENT IS PROPRIETARY TO TE CONNECTIVITY AND SHALL NOT BE USED, COPIED, REPRODUCED OR DISCLOSED IN WHOLE OR IN PART WITHOUT WRITTEN CONSENT OF TE CONNECTIVITY. ALL DIMS AND TOLERANCES .XX: #N/A ARE INCHES UNLESS .XXX: #N/A OTHERWISE SPECIFIED ANGULAR: #N/A COMMSCOPE, INC. DO NOT SCALE DRAWING A B C ENGR: DWN: TITLE C 4 VAM SPLITTER MODULE (INSTALLATION DRAWING) T DRAWING NUMBER SIZE DIUG HASSINGER KC CARLSON 1071050_ADC SHT. DIMENSIONS THIRD ANGLE 2 REV OF 4 IN INCHES PROJECTION A B C D 1 1 3 MODULE SCHEMATIC REF 10 2 16 13 17 14 18 15 10 6 12 5 11 4 10 3 9 2 8 1 7 2 8.61 REF 11 3 3 6.08 REF 2.16 REF REAR FRONT NOTES: 11 4 DOUBLE HIGH MODULE WITH (12) FRONT PORTS AND (6) REAR PORTS SHOWN FOR REFERENCE ONLY. INFORMATION ON THIS DOCUMENT IS PROPRIETARY TO TE CONNECTIVITY AND SHALL NOT BE USED, COPIED, REPRODUCED OR DISCLOSED IN WHOLE OR IN PART WITHOUT WRITTEN CONSENT OF TE CONNECTIVITY. ALL DIMS AND TOLERANCES .XX: #N/A ARE INCHES UNLESS .XXX: #N/A OTHERWISE SPECIFIED ANGULAR: #N/A COMMSCOPE, INC. DO NOT SCALE DRAWING A B C ENGR: DWN: TITLE C 4 N/A (INSTALLATION DRAWING) T DRAWING NUMBER SIZE DOUG HASSINGER KC CARLSON 1071050_ADC SHT. DIMENSIONS THIRD ANGLE 3 REV OF 4 IN INCHES PROJECTION A B C D 1 1 3 MODULE SCHEMATIC REF 10 19 10 2 8.61 REF 12 6 12 18 5 11 17 4 10 16 3 9 15 2 8 14 1 7 13 2 3 3 6.08 REF REAR 3.26 REF FRONT NOTES: 4 12 INFORMATION ON THIS DOCUMENT IS PROPRIETARY TO TE CONNECTIVITY AND SHALL NOT BE USED, COPIED, REPRODUCED OR DISCLOSED IN WHOLE OR IN PART WITHOUT WRITTEN CONSENT OF TE CONNECTIVITY. ALL DIMS AND TOLERANCES .XX: #N/A ARE INCHES UNLESS .XXX: #N/A OTHERWISE SPECIFIED ANGULAR: #N/A COMMSCOPE, INC. DO NOT SCALE DRAWING A B C 4 TRIPLE HIGH MODULE WITH (18) FRONT PORTS AND (1) REAR PORT SHOWN FOR REFERENCE ONLY. ENGR: DWN: TITLE C VAM SPLITTER MODULE (INSTALLATION DRAWING T DRAWING NUMBER SIZE DOUG HASSINGER KC CARLSON 1071050_ADC SHT. DIMENSIONS THIRD ANGLE 4 REV OF 4 IN INCHES PROJECTION
© Copyright 2024 Paperzz
